rubik's cube final layer solution v1.0
DESCRIPTION
A very simple method to solve the last layer (assuming you are using layer method) of the Rubik's Cube. Not intended to be fast, but easy!TRANSCRIPT
Rubik’s Cube Final Layer Solution
By Duy Nam Ton
Upper Cross Formation:
Situation 1a: Situation 1b:
If Situation 1a, use:Right ↑, Top ←, Back ←, Top →, Back →, Right ↓ (6)
If Situation 1b: Use the move above twice. (12)
-OR-
For Situation 1b:
Use:Right ↑, Back ←, Top ←, Back →, Top →, Right ↓ (6)
If Situation 1a: Use the move above twice. (12)
Edge Switcher:
To solve the following:
Use:Bottom ←, Left ↓, Bottom ←, Left ↑, Bottom ←←, Front ←, Bottom ←, Front ↑, Bottom → Right ↑, Front ←, Right ↓ (13)
Three-Corner Shuffle (Clockwise):
To do the following:
Use:Right ↓, Top ←, Left ↓, Top →, Right ↑, Top ←, Left ↑, Top → (9), Repeat if necessary.
-OR-
Three-Corner Shuffle (Counter-Clockwise):
To do the following:
Use:Top ←, Left ↓, Top →, Right ↓, Top ←, Left ↓, Top →, Right ↑ (9), Repeat if necessary.
Last Corner Rotation:
To solve the following by rotating the colors of the indicated (yellow) corner:
1. Select a corner, and then position it as indicated above (in yellow).2. Make sure the corner two-cubes behind the selected corner (dark gray) is correct.3. Use:
Right ↓, Bottom ←, Right ↑, Bottom → (4), Repeat until the indicated corner is rotated correctly. May take up to four repeats.
When the selected corner is rotated correctly, two situations can arise:
I.
If the selected corner is solved correctly, but the two cubes below it is disoriented, as pictured above. Rotate top layer clockwise (Top →), then do step 3 of “Last Corner Rotation”.
-OR IF-
II.
Where the selected corner is solved and everything else is correct, then rotate the whole cube counter-clock wise, then do step 3 of “Last Corner Rotation”.