rt290 rtch quick introduction - sandcan

8
RT290 RTCH Quick Introduction William “BIF” Mott Director of Customer Solutions Independent Rough Terrain Center William.mott@IRTCTX.com Cell (210) 2408872

Upload: others

Post on 16-Oct-2021

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: RT290 RTCH Quick Introduction - SandCan

RT290 RTCH Quick IntroductionWilliam “BIF” MottDirector of Customer SolutionsIndependent Rough Terrain CenterWilliam.mott@IRTC‐TX.comCell (210) 240‐8872

Page 2: RT290 RTCH Quick Introduction - SandCan

What is a RTCH?

“Rough Terrain Container Handler” RTCH

24 October 2018 2

Specifically designed for:Container Handling in Rough TerrainExceptional mobility on-site, ease of transport over the roadHigh operator situational awareness and secure container movementReliable performance and support in remote locations

Page 3: RT290 RTCH Quick Introduction - SandCan

What is a RT290 RTCH?

RT290 RTCH is specifically designed to handle SANDCAN and the oilfield environment

24 October 2018 3

65,000lb Capacity RT290:Tier IV engine with Arctic kit and Positive Air shutoffOperator Camera System with Rear Approach warningOmniShift Tophandler for the SANDCAN DTB System

Page 4: RT290 RTCH Quick Introduction - SandCan

RTCH stands out from other Equipment Container Handling is done best with Twistlocks and top pick Provides load security and speed of handling Same activity as occurs with millions of containers at ports

RTCH provides rough terrain performance for final mile logistics The RTCH pioneered logistics for International Armies in rough terrain Low ground pressure tires for maneuverability (40-80 psi vs 110 for OTR truck) 4 wheel steering and crab steering for tight operating pads; 23mph travel speed RTCH arrives on-site as one piece: it “transforms” into operation in 15 min Average operator can move 10-15 containers per hour

1,325 RTCHs are in service today around the world, proudly built in Cibolo, Texas, USA

24 October 2018 4

Page 5: RT290 RTCH Quick Introduction - SandCan

INDEPENDENT RT290 RTCH

Profile Max Lift Ht: 33’ 8” (10,300 mm) Max Reach: 20’ 7” (6,273 mm) OAL: 33’ 6” (10,210 mm) OAW: 12’ (3,657 mm) HT: 13’ 2” operating (4,014 mm) HT: 9’ 10” transport (2,998 mm) Empty WT: 113,500lbs (51,483 kg) Cummins 6 cyl, TIER IV, diesel engine ZF 4F/2R transmission 4 wheel Drive 32.5’ turn radius 4 wheel / 2 wheel / crab steering Travel speed: 23/15 mph un/loaded (37 km/h, 24 km/h) Gradeability: 27% loaded/unloaded Fording Depth: 3’ (914 mm) Work Tools: Container handler: 65,000lb (29, 483kg) Capacity Single Point Sling rated to 30,000 lbs (13,607 kg) Four Point Sling rated to 40,000 lbs (18,143 kg)

24 October 2018 5

Page 6: RT290 RTCH Quick Introduction - SandCan

INDEPENDENT RT290 RTCH

LogicHaul Options for Oilfield Service 65,000lb (29,483 kg) capacity container handler with OmniShift Camera and Sensor Package Cold weather start assist kit (self contained coolant heater) Oil Drain Kit that follows environmentally friendly practices by reducing fluid spillage while

servicing the hydraulic reservoir, transmission and engine. Positive Air Shutoff Kit

24 October 2018 6

Page 7: RT290 RTCH Quick Introduction - SandCan

RT290 RTCH Capabilities

24 October 2018 7

65,000 lbs(29,483 kg)

1st ROW

27,500 lbs(12,473 kg)2nd ROW

9’6”(2895 mm)

9’6”(2895 mm)

9’6”(2895 mm)

151”(3835 mm)

61”(1549 mm)

342”(8685 mm)

216.5”(5500 mm)

157”(4000 mm)

405”(10300 mm)

524”(13300 mm)

45⁰

Page 8: RT290 RTCH Quick Introduction - SandCan

Summary

RTCH provides a superior on-site container handling system

RTCH transports without disassembly via a common 10 axle RGN trailer

RTCH provides optimum operator visibility and performance

RTCH is an all weather system, rated from -40F to +120F

What can the RT290 RTCH move for you?

24 October 2018 8