rpl app cpc30211 certificate iii in carpentry · ......
TRANSCRIPT
Recognition of Prior Learning application
CPC30211 Certificate III in Carpentry
Section 1 Student details First and middle name/s: Surname:
Street number: Street Name:
Suburb: State and Post code:
Date commenced: Date completed:
Page 2 of 7
CONTENTS Section 1
Student details
FP
Section 2
Qualification Core and elective units
3
Section 3
5
RPL evidence guide
Section 4
7
Application checklist
Modification and review Date 12/12/2016 Version 1.2 RTO code 40963 ABN 64 165 768 696
Page 3 of 7
Section 2 Instructions Read through the instructions for this RPL application carefully.
1. Complete section 1 by including your full name and date commenced and date completed fields 2. Complete section 2 by selecting all of the 22 core units and choose 8 elective units by ticking the boxes in
the far right column (for a full qualification) 3. If you are wanting RPL in a few units and not a full qualification, this will attract a fee of $400.00 per unit 4. Additional elective units can be chosen, however, this will attract an additional cost of $400.00 per unit 5. Go through the support evidence RPL list in section 3 and tick off and provide the evidence (this is not an
exhaustive list). 6. This is not an assessment tool and does not determine your competency 7. When you have completed the application, sign section 4
Provide as much evidence as you can. If further evidence is required the RTO will contact you. Evidence submitted will be referenced against the self-assessment questions in the assessment tool kit. For example, evidence could include: a construction card, SWMS, JSA, references from your employer/s. The assessment tool kit also has an employer history form which you will need to complete to show your employment history in relation to job tasks you have performed. NOTE: This is not an assessment tool and does not determine your competency in the qualification. Qualification description This qualification provides a trade outcome in carpentry, covering work in residential and commercial applications Occupational titles may include: Carpenter Carpenter and joiner The qualification has core unit of competency requirements that cover common skills for the construction industry, as well as a specialist field of work. The construction industry strongly affirms that training and assessment leading to recognition of skills must be undertaken in a real or very closely simulated workplace environment and this qualification requires all units of competency to be delivered in this context. Completion of the general induction training program specified by the National Code of Practice for Induction Training for Construction Work (ASCC 2007) is required before entering a construction work site. Achievement of unit CPCCWHS1001 covers this requirement.
Qualification pathways information Refer to student handbook pages 5-6 Licensing/Regulatory information Not applicable Pre-requisite unit/s: CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry. Application of the unit: This unit of competency covers fundamental OHS necessary to undertake work tasks within any sector in the construction industry. It includes the identification of hazardous materials, including asbestos, and compliance with legislated work safety practices. It does not cover removal of asbestos, which is a licensed activity.
The unit relates directly to the general induction training program specified by the National Code of Practice for Induction for Construction Work (ASCC 2007) required to enter a construction work site. Completion of unit CPCCWHS1001 covers this requirement. Entry requirements;; NIL
Page 4 of 7
Qualification packaging rules When determining which elective units of competency you will choose. For example, consider the job role the unit applies to, how it will impact on tendering for work, whether it fits in with your employer needs and the specialised industry field of work. To achieve this qualification, the candidate must demonstrate competency in: 30 units of competency;; 22 core units 8 elective units A maximum of two of the eight required elective units may be substituted by selecting relevant units of competency from any Certificate III or IV construction qualification or qualification in another endorsed Training Package. Some units in this qualification may have prerequisite requirements, which must be met when packaging the qualification. Users are referred to the list of CPC08 units with prerequisite unit requirements available in this Training Package for this purpose.
UNIT CODE UNIT TITLE Yes (Tick box)
Core units
CPCCCA3023A Carry out levelling operations
CPCCCM1012A Work effectively and sustainably in the construction industry
CPCCCM1013A Plan and organise work
CPCCCM1014A Conduct workplace communication
CPCCCM1015A Carry out measurements and calculations
CPCCCM2001A Read and interpret plans and specifications
CPCCCM2002A Carry out excavation
CPCCCM2007B Use explosive power tools
CPCCCM2008B Erect and dismantle restricted height scaffolding
CPCCCM2010B Work safely at heights
CPCCCO2013A Carry out concreting to simple forms
CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry
CPCCCA3003A Install flooring systems
CPCCCA3004A Construct wall frames
CPCCCA3005B Construct ceiling frames
CPCCCA3006B Erect roof trusses
CPCCCA3007C Construct pitched roofs
CPCCCA3008B Construct eaves
CPCCCA2002B Use carpentry tools and equipment
CPCCCA2011A Handle carpentry materials
CPCCCA3001A Carry out general demolition of minor building structures
CPCCCA3002A Carry out setting out
Page 5 of 7
Elective units
CPCCCA3010A Install and replace windows and doors
CPCCCA3012A Frame and fit wet area fixtures
CPCCCA3019A Erect and dismantle formwork to suspended slabs, columns, beams and walls
CPCCCA3016A Construct timber external stairs
CPCCCA3014A Construct bulkheads
CPCCCA2003A Erect and dismantle formwork for footings and slabs on ground
CPCCCA3017B Install exterior cladding
CPCCSF2004A Place and fix reinforcement materials
22 core units
8 elective units
Page 6 of 7
Section 3 Supporting RPL evidence list Student and or trainers and assessors are to use this form as a means of gathering and ticking off evidence which you will provide to support your RPL.
SUPPORTING EVIDENCE
EVIDENCE RECEIVED
Tick
NOTES
DETAILS OF CAREER HISTORY
Y N N/A
CV / Resume Current Employment Contract Current Job / Position Description Previous Employment Contract Previous Job / Position Description QUALIFICATIONS & TRAINING Qualification testamur, record of results and/or Statements of Attainment (Domestic & International)
Statement of Attendance eg: training courses, workshops, seminars, symposiums, etc. (Domestic & International
Whitecard and other licences REFERENCES & RECOMMENDATIONS References / Letters from current Employers / Managers / Supervisors / Colleagues
References / Letters from previous Employers / Managers / Supervisors / Colleagues
Appraisals and Performance Reviews
Third Party Testimonials/reports
Awards and Industry recognition
Industry or Association Memberships
Examples of current duties & responsibilities performed in daily work tasks Plans, Schedules, Polices, Procedures, Guidelines, Correspondence, Emails, etc (refer to Evidence List from Applicant)
Employment history form Videos showing your work Photographs showing your work ADDITIONAL EVIDENCE TO SUPPORT APPLICATION Memberships / Fellowships with Industry Groups & Associations
Volunteer work undertaken for Industry / General Supporting evidence Y N N/A Comments Special Skills / Hobbies / Interests / Additional documentation of relevance List additional documentation:
Page 7 of 7
Section 4 Application checklist Use this checklist to ensure you have completed all sections before you submit your RPL application to [email protected] Application checklist
Yes
No
Comments
Read the instructions on page 3 of this application
Section 1 All required information has been completed?
Section 2 Select core and elective units for RPL
Section 3 Tick off the evidence have for RPL (This is not an exhaustive list)
Section 4 Complete this checklist and sign
Scan and email application to [email protected]
Student name:
Student signature:
RTO authorised person name:
RTO authorised person signature:
Date received: