roxstar...

A rich, durable film dipped riser with accenting anodized components, capped off with Realtree APG limbs make the Roxstar a beauty to behold. The power supply for the Roxstar is Alpine’s V3g Cam, designed to produce the best overall performance for hunting. The cam design provides high velocities, smooth draw force profile, and a full 80% letoff.Become a Roxstar and emerge on your stage of performance with confidence, knowing that you are shooting the most radical, blood spilling, hunting machine available.

performance hunting...

Exclusive Alpine Offset Quiver Mount, shifts the quiver inside the riser for improved centerline bow balance...

Pulse Isolator String Stop with linear and radial adjustment...

V3g Matched Performance Hybrid Cam System, with Dynamic Load Balancing...

Precision Modular Strut System...

Split Point Limb Capture System, with True Position Technology...

The Roxstar is available in full camo with a film dipped riser and limbs, or a black anodized riser with camo dipped limbs.

Licensed under Patent #6,990,970B-1

As the cam is drawn, the force applied to the limbs changes from one side to the other, which normally induces cam lean. Alpine’s exclusive “Dynamic Load Balancing System” with helical grooves machined into the Velocitec 3G Cam System, move the balance point of the limb laterally in a continuous motion as the cam is drawn, thereby following the load change and keeping the cam straight, throughout the entire draw cycle.

The Verdict features a reflexed forged riser with our new “Limb Vice Pocket System”. This system clamps the limb and pocket assembly against the riser just like a vice to totally eliminate noise, vibration, and recoil. The new “Fast Lane Cable Guard System” is sleek, smooth, and trouble free. It drastically reduces recoil and noise to give this new performer an unbelievable feel when shooting. An “Integrated Offset Quiver Mount” is a standard feature on this bow that will allow almost any quiver to be mounted back and out of the way. This exclusive Alpine mount moves the quiver closer to the true centerline of the bow to aid in overall balance. Our “Pulse Isolator String Stop” is now fully adjustable and allows for fine tuning of centerline, as well as fore and aft movement. Alpine has also added a 416 stainless steel stabilizer insert to the Verdict for positive and long lasting thread engagement for the stabilizer.

verdict...The final judgement has been passed..

fireball...The 2014 Alpine F1 Fireball is the performance bow of your dreams…Built from a rock solid forged riser with power tuff composite limbs. The F1 Fireball is all the bow you will ever need to tag the trophy of a lifetime or bang away at the range. The power plant of this machine is the 3g Velocitec Cam. The Velocitec Cam System has been in the Alpine line for years and is tried and true in situations from the bitter northern Canadian cold to the sweltering African summer heat. The F1 Fireball is sure to exceed your expectations with its blazing speed, smooth draw cycle, and bone crushing kinetic energy. The best part about the F1 Fireball is the fact that it doesn’t hurt the pocketbook and costs about half of most other performance bows on the market.

Rocky Jacobsen, founder of Rocky Mountain Hunting Calls, relies on Alpine bows to harvest his game thougthout the year.

Larry Windnagle, Enterprise Accounts Area Sales Manager NW District for UPS, with a nice Montana bull taken with his Fireball.

New, redesigned limb pocket system for 2014 will provide years of solid, reliable, and trouble free shooting.

Available in Black or MO Infinity Camo

frenzy...

The 2014 Alpine Mako is built with a CNC machined riser and a redesigned limb pocket system that is capped off with machined aluminum Radial Force Cams. There are no plastic components on this bad boy! The Radial Force Cam System features 7 inches of rotating draw length adjustment to fit almost any age of bowfisherman. The draw length can be adjusted without a bow press and can be done in the boat in seconds. The total mass weight of the Mako is right at 3 pounds so it will keep your complete set-up light weight for a full day of arrow flinging.

Be on top of the food chain when you enter the water with an Alpine Mako.

mako...bowfishing...

The re-introduction of the Alpine Frenzy for 2014 was inevitable… The Alpine Frenzy is back. The perfect bow for a beginning archer or a budget minded bowhunter is here and features 7 inches of adjustable draw length from the Radial Force System and poundage up to 60 pounds. The Alpine Frenzy meets the needs for beginner hunters or even a more advanced archer looking to lighten things up.The light weight design and full draw length adjustability, without the use of a bow press, make the Alpine Frenzy the best choice for the person not wanting to break the bank.

Long time Alpine Staff Shooter, Ryan Greene, with a nice Idaho bull.

Steve Stajkowski, Owner of SJX Jet Boats Inc., with a string of Snake River carp taken with his Alpine Mako.

Also available with a Pink Camo riser & black limbs for the gals.

The Ruckus and Rookie are built using a machined aluminum G Series riser and pocket. The RF cams on this little bow are also machined from billet aircraft aluminum. No plastic on these babies. It’s top of the line all the way!

No shortcuts on the Ruckus and Rookie bows...

The Alpine Ruckus is built for serious shooting. All machined components and a high performance Radial Force Cam get the teen or lady up and running with a great bow for hunting or target shooting.The hunting version is finished in Mossy Oak’s Break-Up Infinity Camo pattern, and the lady version is finished in stunning Pink Camo. Both bows are inlaid with a pewter finished medallion. Step up from your beginner bow into a great shooting performer from Alpine.

RUCKuS...

The small Alpine soft bow case is specifically designed for the Alpine youth and bowfishing bows with a budget in mind.

Alpine Youth Bow Case...

The Alpine Rookie is just what you need when starting out your aspiring young archery enthusiast. This little bow is built to handle the abuse of a kid and still perform flawlessly when your youngster hits the range. The Alpine Rookie has been designed to maximize its usage as your child grows, with a draw range of 19 to 25 inches and draw weight range from appx. 10 to 35 pounds. Alpine believes that champions are built from a young age, and the Alpine Rookie is a key part to bringing your kiddo to a level above the rest.

ROOKIE Youth...age 10-adult...

Ashley Sande with her first bow kill in Washington state.

Available with a Black riser and the option of Pink or conventional Camo on the limbs.

power loc Ultralite quiver...

The new Power Loc™ 4 Arrow Quiver sports the best features of the legendary Soft Loc Quiver with the addition of some great new designs and improvements. Alpine continues to use a variation of the very effective rubber mount that isolates noise and vibration between the quiver guide rails and your bow. In fact, when the quiver is removed from the mount, all of the latching system comes off from the bow and stays with the quiver so there is no chance of unwanted noise and vibration from the quiver mount while the quiver is off the bow. The new Power Loc™ has an innovative roll and lock latch to prevent accidental dis-mounting of the quiver while in heavy brush, dirt bike riding, or on horse back. As the latch is rolled into position it applies pressure to the rubber guide rail module as the stainless steel latch pin locks into an indent in the 6061 aluminum mounting base. Safe, secure, and vibration free. Made in the USA

The Power Loc™ is shown above without the mounting base as it would be when removed from your bow. The aluminum mounting base is all that will remain on the bow so with no moving parts, there will be no noise or vibration created from the quiver mount.

The rugged Power Loc™ mounting base is extruded and machined from 6061 aluminum. It features 2 hoizontal mounting positions and 1 set of holes for rotaing the quiver 15 degrees for additional clearance options when installing.

1. Load the rail gripper assembly into the mounting base pressing the latch side in last.

2. The latch is now in the preloaded position. Simply rotate the lever down until it clicks into the indent on the aluminum base as shown below.

The Power Loc™ hood features a full urethane foam liner to protect both mechanical and

standard broadheads. With the liner being the full depth of the ABS hood there is no

chance of making noise when removing your arrow.

The new Power Loc™ arrow gripper has been designed as a two stage gripper that will grip even the smallest arrow shafts.The latch is shown

in red for illustrative purposes only.

Designed for Vertical Bows and Crossbows

Power Loc Quivers are available in these popular camo patterns..

• Mossy Oak Infinity • Realtree Xtra • Realtree APG HD • Mathews Lost Camo • Mathews Lost AT • Black

Designed for Vertical Bows and Crossbows...

Alpine’s Quick Draw Hip Quiver System features a rugged full grain leather holster with a rotating mount and a quick detach rail gripper. This is a very unique hip quiver designed with the flexibility to adapt to brushy or open conditions in seconds. Simply purchase the Soft Loc of your choice (3, 5, or 7 arrow) and mount it to your bow. Then once you purchase the hip quiver, you are set and ready to go with a mount on your bow and on your hip. This allows you to switch back and forth from the bow to your hip in seconds.

Soft Loc Hip Quiver System...

The Tension Pin Set is for securing smaller diameter arrows. Each pin is molded in an oval shape and designed to increase arrow tension on the Alpine Soft Loc and Bear Claw arrow grippers. Simply slip a pin into the outbound hole in the lower gripper. Twist slightly, to increase or decrease tension. 7 pins included.

Secure your Soft Loc Quiver to any tree with a flip of the wrist and a simple twist. This unique Quiver Clip is a great way, pioneered by Alpine Archery, to securely attach your Soft Loc Quiver to the tree. The screw-in version of the quiver mount has a very sharp lag screw that tucks neatly into the body of the mount for transportation and storage. This compact feature allows you to pack the quiver mount in your pocket or any pouch of your hunting pack without injury or damage.

Soft Loc Screw-in Tree Mount...

SOFT LOC QUIVERS...

Soft Loc Quivers are available in 3, 5, and 7 arrow versions...

• Mossy Oak Infinity • Realtree Xtra • Realtree APG HD • Mathews Lost Camo • Mathews Lost AT • Black (5 arrow only)• Skulz Camo (5 arrow only)

Soft Loc Quivers are available in these popular camo patterns..

The beauty of the “system” is the extreme versatility of the quiver itself due to the unique rubber mount and dual guide rails. Attach or detach the quiver quickly and quietly. Vertical adjustment, vibration dampening, hip holsters, and compact mounts are all features that a great quiver must have. All are present in the Soft Loc family.If you are looking for a quiver that is unequalled in quality, innovation, dampening, and price, look no further than Alpine Archery.

Since the introduction of the Soft Loc Quiver System back in 2001, it has only gained in popularity. The Soft Loc quickly became known as the quietest, mid-priced quiver available. When mounted on a bow, this quiver actually reduces felt vibrations, therefore acting as a great and very practical vibration dampener. The many awards for quality and innovation have posted this system to be quoted as “The best quiver system on the market”!

The Pro Balance G1 Quiver Mount is designed to accept almost any 1 piece quiver. Using this mount allows you to balance your bow with a quiver you already own. Adjustments include fore and aft movement, in 3 hole positions on the mounting bracket and infinite windage adjustment with the guide rail clamp.

Pro Balance G1 Quiver Mounting System..

BEAR CLAW QUIVERS...

When your foam gets worn out, you should replace it. The Bear Claw Replacement Foam is cut from top quality ethafoam and will hold your arrows safely until you are ready for that next shot. Available for 3 and 5 arrow versions.

Always hunt safe!

Secure your Bear Claw Quiver to any tree with a flip of the wrist and a simple twist. This Quiver Clip is a unique way, pioneered by Alpine Archery, to securely attach your Bear Claw Quiver to the tree. This screw-in mount has a very sharp lag screw that tucks neatly into its body for transportation and storage.

Bear Claw Compact Screw-in Mount...

Works great with mechanical broadheads!

• Mossy Oak Infinity • Realtree Xtra • Realtree APG HD • Mathews Lost Camo • Mathews Lost AT • Black (5 arrow only) • Skulz Camo (5 arrow only)

Bear Claw Quivers are available in 3 & 5 arrow versions...

Now with a smaller and more compact mounting bracket...

Cousin to the Soft Loc… The Alpine Bear Claw Quiver is a great, cost effective way to carry your arrows. The Bear Claw 3 and 5 arrow versions are designed to have more refined features than any other price point quiver available. The Bear Claw Quiver is a universal quiver system designed with the treestand hunter in mind. With the Bear Claw you have a lightweight, inexpensive quiver that easily detaches and will accept any common arrow size. The Bear Claw has a wide range of vertical adjustment, so you can move the quiver to avoid rest or sight conflicts and keep your nocks out of the mud. Conventional broadheads are no problem and the convenient pre-cut holes in the quiver foam allow you to use mechanical broadheads without the extra weight and expense of an additional arrow gripper.

Bear Claw Quiver, the ideal treestand quiver, in all of the hot camo patterns...

V-Twin arrow rests...

In 2006, Alpine introduced the Whisperflite Fall Away Arrow Rests and today the legacy continues to grow. Independent testing on over 15 different fall away rests awarded Alpine the #1 best pick in the “Best Bang For The Buck” category in a recent head to head comparison. This innovative rest is a “no bones about it” product… Alpine has achieved this by taking into account every possible feature… Built in arrow holder on the launcher, independent windage and vertical adjustment, universal mounting holes, buss cable or cable slide pull option, sealed ball bearings, black anodize and the list goes on…

Alpine’s Match Grade Whisperflite Rest is built using dual ball bearings with one bearing mounted into each side of the mounting bracket to assure absolute accuracy shot after shot for years of trouble free shooting.

Whisperflite Arrow Rest Affordable, innovative, rugged, and easy to set up...There are more varieties of arrows and different cam systems than ever before. Sometimes certain

combinations of the two can be a little more challenging to tune than the dealer or consumer wants. At times it is necessary to vary the pressure on one side of the arrow to compensate for a particular cam system or arrow combination. The V-Twin Arrow Rest from Xtreme Hardcore Gear™ has a great way of dealing with this issue. Independent adjustable spring tension on each fluoropolymer launcher allows for custom tuning of side and downward tension. Combine this with the rubber mounted top capture option and you get one of the most adjustable full capture rests on the market today. Billet machined aluminum body and fluoropolymer launchers make the V-Twin Arrow Rest extremely durable and quiet enough to harvest the wariest of big game.

The machined aluminum plunger housing holds the fluoropolymer plunger and a compression spring, with the spring tension controlled by the adjustment of the set screw. The plunger system is extremely forgiving and easy to tune. When paper tuning, for example, you would turn the screw in on the left plunger spring to increase tension and correct a slight left tear. Larger tears in the paper will be adjusted with normal windage and elevation adjustments to the rest body itself.

Your arrow is placed between the 3 fluoropolymer pins for absolute control. The 2 lower plungers are spring loaded and compress as the arrow is placed into capture mode. The upper pin is mounted in a rubber housing that will flex out of the way when placing the arrow in capture mode, or when the arrow is released during the shot. This top capture pin can also be removed if so desired for simple launcher style shooting without full capture.

Fluoropolymer has a very low coefficient of friction, so the arrow is quiet and smooth during the draw cycle.

MR Series Stabilizer, superior dampening, compact, and adjustable...

“Six Shooter Weight System” ...

• 3” Carbon fiber rod • Mass weight is 6 to 8 oz.

• Length is 5.5 inchesRest is available in RH

only

xhcg stabilizers...

The Phantom XR is a great all around stabilizer. With an overall length of 4.5” and a weight of 6.5 ounces, you will have a stabilizer offering lots of recoil and vibration control in a compact package. Available in Carbon Fiber finish.

The Phantom XR7 has a custom wrapped carbon main tube with two adjustable dampening modules for added vibration and noise control. The flexible rubber body absorbs vibration like a sponge and the carbon film dipped head weight adds the right balance for the ultimate shooting experience. Weight 8.5 oz.Available in Carbon Fiber finish.

The Phantom ZR7 has all the features of the XR7, with the addition of the Mathews Harmonic Damper® installed in the head weight. Our custom wrapped carbon main tube is fitted with two adjustable dampening modules for added vibration and noise control. The flexible rubber body absorbs vibration like a sponge. Weight 9.5 oz. Available in Lost Camo, Lost AT, and Carbon Fiber finishes. *Mathews Dealer Exclusive Item*

The Phantom ZR is a great all around stabilizer. With an overall length of 4.5” and a weight of 7.5 ounces, you will have a stabilizer offering lots of recoil and vibration control in a compact package, with the addition of the exclusive Mathews Harmonic Damper®. Available in Lost Camo, Lost AT, and Carbon Fiber finishes. *Mathews Dealer Exclusive Item*

xhcg bow slings... stabilizer accessories...

Target Head Weights in 2 weight and size combos.Small weight is .75” diameter and .5 oz.Large weight is 1” diameter and 1.3 oz.

Our Dampening Modules will compliment any stabilizer set-up that uses a .860 diameter carbon rod. Add as many as needed to get the desired effect.

Xtreme Hardcore Gear™ Carbon Fiber Stabilizer Tubes in standard .860 diameter for target shooting.We build these tubes with machined aluminum tube ends, finished in a distinctive red anodize. Tube ends are tapped with the ATA standard 5/16-24 thread. Tubes are finished with a durable high gloss clear coat and come in the following sizes:3.5“, 6”, 18”, 24”, and 30”.

Flex Couplers come in 2 sizes.1” diameter and .750” diameter. Use to customize the feel and recoil of your target set-up.

V-Loc Ultra Bow SlingEvery bow has different balance characteristics, and depending on which accessories you use, those characteristics can change considerably. Putting a sight, rest, and quiver on a bow can add a lot of weight to one side. Stabilizers and stabilizer mounting holes are great ways to address balance problems, but that only adds weight to the center line of the bow. Xtreme Hardcore Gear™ has designed the V-Loc Ultra Sling System™ which allows the stabilizer and its weight to be custom positioned to offset the weight of added accessories. No one says the stabilizer has to be down the center. Why not balance your bow the way you want it to be? Made with billet machined components and a rugged positioning lock, the V-Loc is sure to be as durable as it is reliable. The V-Loc System™ is available in the Ultra Bow Sling or the Adjustable Stablizer Mount. Don’t compromise the performance and balance of your bow any longer. Pick one up at your local dealer today.

The Adjustable Stabilizer Mount is perfect for balancing your bow when you don’t use a bow sling. This mount can be mounted in the front stabilizer hole, or rear mounted, if your bow is tapped for a reverse stabilizer mount.

V-Loc Adjustable Stabilizer Mount

Machined channel mates to your riser and keeps the mount from rotating.

V-Loc Mounts & Slings lock in place with a 6-32 screw that locates into the serrations around the bottom of the mount body.

V-Loc Z1 Stabilizer / Sling with Mathews Harmonic Damping®

The V-Loc Z1 Stabilizer is perfect for the shooter that wants added balance and vibration control in a super compact design. The Mathews Harmonic Damper® and offset control arm weigh 6.5 ounces, and offer the feel and performance of many full size stabilizers in an ultra compact package. *Mathews Dealer Exclusive Item*

Note: Swing arms are black. Shown in red for illustrative purposes only.

Alpine’s Wind Tester is designed to eliminate fumbling for or even loosing your wind tester while stalking game and checking wind direction. By hooking it to

your belt or pack, you always know where it is, plus it allows you to keep hand movement to a minimum and

remain undetected by your quarry. It is assembled using a shock cord to give you additional reach away from your body

to pick up subtle wind movements. Since the bottle hangs with the nozzle in the down position, your powder is always charged in

the tip, and ready for action. *Powder comes in white, not green*

The Mach 5 Cable Slide features a fluoropolymer slide surface, press fit into a rubber, vibration dampening sleeve, and capped off with a space age looking slide body that is fitted with a termination point for a fall away rest pull cord if desired. Alpine Archery has created this cable slide by combining fluoropolymer and rubber into a high-tech composite housing, making the Mach 5 the best cable slide available. Available in black, brown, camo, or carbon fiber dip/red.

xtreme hardcore gear firearms products section...

Top accuracy requires a level gun. Even a slight canting of your rifle will cause windage errors. The TRU Level Pic Rail features a precision level housed in the CNC machined picatinny base. This mounting system protects the level from being bumped out of plumb during hard use. The unique location also keeps your level and scope eye piece in the same sight picture, allowing you to check the level when aiming, without raising your head from the shooting position. If you are serious about rimfire shooting and varminting, you need a TRU Level Picatinny Mount on your tricked out Ruger® 10/22®.Available in Black & Clear Anodize

TRU Level™ Picatinny Mount for the legendary Ruger® 10/22®...

10/22® TRU Level™ Picatinny Mount Specifications:Material: Source USA Mills 6061 T-6 AluminumFinish: Black Anodize Mill Spec 8625 Type 3 HardcoatMounting Screws: (4) Source USA 6-48 Torx #15 @15 Inch Pounds.Picatinny Configuration: (14), MIL-STD 1913 Picatinny Cross Slots.

Alpine Super Duster Wind Tester

This exploded view drawing shows the Mach 5 components as they are assembled into the slide.

Rope pull hole for fall away rests.

Streamlined composite body.

Rubber dampening sleeve isolates & reduces vibrations.

The fluoropolymer liner and rubber sleeve have a locator hole to keep them mated and aligned with the alignment post in the composite body.

xhcg scope mounting accessories...

• Precision level mounted into a CNC machined picatinny base for perfect level to base alignment.• Constant level verification when in head down shooting position.• MIL-STD 1913 Picatinny Cross Slots.• Billet machined 7075 T-6 Aluminum. Source USA Mills• Black Anodize Mill Spec 8625 Type 3 Hardcoat• Mounting Screws: (4) 6-48 Torx .225 Head dia. @ 22 Inch Pounds. Source USA

TRU Level™ Pic Rail Centerfire Rifles

Gun Model Action type MOA spec Recoil lugRemington 700 Long action 0 MOA YES

Short action 0 MOA YESLong action 20 MOA YESShort action 20 MOA YES

Winchester Model 70 Build with 3 screw holes in the rear to fit both Long and Magnum actions.

Long/Magnum action

20 MOA YES

Savage Mod110, 111, 114, and 116 Long action 0 MOA YESLong action 20 MOA YES

Savage Mod10, 11, 14 and 16 Short action 0 MOA YESShort action 20 MOA YES

Savage Mod 112 Long action 20 MOA NOSavage Mod 12 Short action 20 MOA NO

Long range shooting requires a level gun, as any tilt in the gun translates into a serious windage error at longer ranges. When using the TRU Level™ Scope Base, your level and scope eye piece are in the same sight picture. This allows you to check the level while aiming without having to raise your head from the shooting position. With the level housed in the machined picatinny base, it is protected from being bumped out of level as often happens with some scope level systems. If you are serious about long range shooting, you need a TRU Level™ Picatinny Mount.

xhcg ar tactical level...

AR Tactical LevelThe new AR Tactical Level offers the mid to long range AR shooter an anti-cant device that is compact and mounts completely out of the way. The sides are sculpted so you can easily reach the charging handle with no chance of snagging the level mount. No more worries about tearing off or bumping a level that protrudes from the side of the pic rail. The TRU Level is always in your sight picture while shooting, so no more lifting your head to check the cant of your rifle while executing a shot.

Specifications:• Constant level verification when in head down shooting position.• CNC machined 6061 T-6 aluminum. Source USA Mills• Black Anodize Mill Spec 8625 Type 3 Hardcoat.• Fits all AR15 rifles with MIL-STD 1913 Picatinny Cross Slots.• Side cut at the rear for ample hand clearance when operating the charging handle.• The Height of the level body from the top of the pic rail to top of level is .375”

xhcg tactical long range rings...

The Force Recon Tactical Rings feature a built in level housed into the lower portion of the rear scope ring. Having the level in the base of the ring assures that it is always perfectly parallel to the top of the picatinny rail which is essential for long range shooting. A perfectly plumb scope and rifle are essential for the bullet to follow a true vertical line throughout the projectile's path to the target.These precision, long range rings offer precise mounting for your optics onto the picatinny base and will not allow the scope to move under any recoil scenario. Our wide .875 mounting platform offers a stable interface with the pic rail while the 2 cross slot bolts provide awesome clamping power. We go one step further by installing a pair of stainless steel guide rails that press into the ring base. The ring base clamp rides on these rails to keep the clamp perfectly aligned as the 2 cross slot bolts are drawn tight against the pic mount.

New, Force Recon Tactical Scope Rings

Specifications: Force Recon & Ranger Precision Scope Rings

Ring Bore Diameter: 30mm Tol. +/-.00134mm Tol. +/-.001

Material: Source USA Mills Billet 7075 T-6 Aircraft AluminumFinish Anodize: Black Anodize Mill Spec 8625

Type 3 HardcoatRing Height 30mm Medium:Top of pic mount to bore center

1.000” Rings are matched within .003

Ring Height 30mm Medium:Top of pic mount to bottom of the scope bore

.406” Rings are matched within .003

Ring Height 30mm Low:Top of pic mount to bore center

.850” Rings are matched within .003

Ring Height 30mm Low:Top of pic mount to bottom of the scope bore

.260” Rings are matched within .003

Ring Height 34mm:Top of pic mount to bore center

.900” Rings are matched within .003

Ring Height 34mm:Top of pic mount to bottom of the scope bore

.235” Rings are matched within .003

Cap Screws: (6) Source USA 8-40 #15 Torx @ 20 Inch PoundsClamp Screws: (2) Source USA 10-24 SHC Grade 8Clamp guide Rails: (2) Source USA .125 Precision dowel pins

Ranger Tactical Rings...The Ranger Rings offer all of the same design and features as our Force Recon rings, except for the integrated level. If you want the best in a 30MM tactical ring this is it!

The “Tank” is CNC machined from solid steel to give it the weight necessary for no-hassle crosshair leveling. First, your rifle's action must be level. Then to level the crosshair in your scope to the leveled action, place the “Tank” on top of your elevation turret with the scope ring caps loosely in place. Then rotate your scope until the bubble lines up between the lines in the tank and you are now plumb to the rifle. Finally, tighten the scope ring cap screws evenly until tight and you are ready to hit the range.

The “Tank” Crosshair Leveling Device

Dustin Bomley, Alpine and XHCG Production Manager, with a fine Idaho bull.

Josh Cluff, HS Precision Sales Manager, with a great South Dakota mule deer. Josh is an avid bowhunter and precision long range rifle shooter.

BOW MODEL

IBO Rating

Draw Length

Draw Weight

Brace Height

Bow Axle to

Axle

Bow Mass

WeightColor/ Pattern

Cam Style

Grip Material

String Length

Buss Length

String Mat.

Let-off

ROXSTAR 6.5 RH only

332 fps @ 30”

28-31” modules 60, 70# 6.5” 34.5” 4.4# REALTREE APG V3g Rosewood

1 piece 57.75” 33” + yoke 8125 80%

ROXSTAR 7.5RH only

328 fps @ 30”

29-32” modules 60, 70# 7.5” 34.5” 4.4# REALTREE APG V3g Rosewood

1 piece 57.75” 33” + yoke 8125 80%

VERDICT RH only

328 fps @ 30”

28-31” modules

60, 70# 6.75” 31.5” 4.2# REALTREE APG V3g Rosewood

2 piece 54.75” 29.5” + yoke 8125 80%

F1 FIREBALL RH only

327 fps @ 30”

27-30” modules 60# 6.125” 34” 4.2#

BLACK/CAMOOR

CAMOV3g Rosewood

2 piece 56.5” 31.5” + yoke 8125 80%

FRENZY295 fps @ 30”

23-29” rotating 60# 6.5” 30.75” 3.0# CAMO/BLACK

Radial Force Graphic

Domed 51.375” 32.5” BCY 652 65%

MAKO BOWFISHING

23-29” rotating

30-50# range 6.5” 30.75” 3.0# BLUE WATER

DROPS

Radial Force Graphic

Domed 51.375” 32.5” BCY 652 65%

RUCKUS Teen 22-28”

rotating30-50# range 6.5” 30.75” 3.0#

INFINITY/BLACK OR

PINK CAMO/BLACK

Radial Force

Graphic Domed 49.625” 32.5” BCY

652 65%

ROOKIE Youth

19-25” rotating

10-35#range 6.0” 28” 2.5#

BLACK/CAMOOR

BLACK/PINK CAMO

Radial Force

Graphic Domed 44.5” 30” BCY

652 65%

NOTE: Draw lengths, brace heights, and axle to axle lengths are approximate due to soft harness systems. All yokes are 15.25” long

XHCG Firearms accessores... bow specifications...

Gunsmith Installed Muzzle Brake Blank Specifications416 Stainless Steel

1.00 diameter 5/8”-24 thread 2.00” overall length

PART # HC-91110

.875 diameter 9/16”-28 thread 2.00” overall length

PART # HC-91111

.750 diameter 1/2”-28 thread 2.00” overall length

PART # HC-91112

4140 Carbon Steel

1.00 diameter 5/8”-24 thread 2.00” overall length

PART # HC-91115

.875 diameter 9/16”-28 thread 2.00” overall length

PART # HC-91116

.750 diameter 1/2”-28 thread 2.00” overall length

PART # HC-91117

Gunsmith Installed Muzzle Brake Blanks

We make 416 stainless steel and 4140 carbon steel muzzle brake blanks for gunsmiths. These brakes are precision machined on our CNC turning centers.

Although we call this a blank, we do most of the work for you. They are threaded and counter-bored for the barrel thread and shoulder. The 30 ported holes are .191 diameter and chamfered to save you time. We have drilled a .250 dia. pilot hole through the brake, and you must finish bore that hole to accommodate the caliber of the gun build plus .020 overbore clearance. These brakes are sold to gunsmiths only, as professional installation is required to make sure the correct bore size is used in the gun build.

These brakes are designed to be installed on 223/5.56 cal. AR15 rifles with .750 barrels. This brake will reduce recoil and muzzle jump significantly and improve your time on target with follow up shots and double tap drills..

Specifcations:Thread: 1/2-28 Class 2 Material: 4140 Carbon SteelFinish: Black Oxide

AR Muzzle Brake

For the ladies!!! This HOT black ribbed boyfriend tank is 100% cotton, has a longer length, and is form fitting. Comes with Pink & White Alpine logo on the chest and “Fear the Force” across the lower back. Black. Junior Sizes: SM, MD, LG, XL, XXL.

This hooded sweatshirt is a 50/50 blend fleece. Double layer hood, drawstrings, and kangaroo pocket. Middle chest Alpine logo & “Team Alpine” down left sleeve. Black. Mens Sizes: SM, MD, LG, XL, and XXL.

Alpine short sleeve Mako tee with front Alpine logo, shark on right sleeve, and Mako graphic on back. Gray.Mens Sizes: SM, MD, LG, XL, and XXL.

Be a part of Team Alpine!!! Short sleeve 100% SoftCool moisture wicking fabric.Blue & Gold shirt with Alpine logo and “Staff Shooter” on left chest with full size logo on the back. (Available to anyone) Mens Sizes: SM, MD, LG, XL, XXL, and 3XL.

Alpine long sleeve tee with front Alpine logo & “Team Alpine” down left sleeve, and bow graphic on back. Green. Mens Sizes: SM, MD, LG, XL, and XXL.

These short sleeved polos have the front embroidered Alpine logo and are stone washed in Taupe and Coal.Mens Sizes: SM, MD, LG, XL, and XXL.

Alpine short sleeve bow tee with front Alpine logo, deer skull on right sleeve, and bow graphic on back. Blue.Mens Sizes: SM, MD, LG, XL, and XXL.

clothing...

Alpine hats with embroidered logo. Available in Black, Sage, Brown, and Pink Camo. One size fits all.

Visit these other fine Alpine companies

xtremehardcoregear.com208-746-7065

lilmacmolds.com208-743-3858

www.alpinearchery.com Business hours: Monday through Friday 8 AM to 4:30 PM (Pacific Time)Catalog requests and email address: info@alpinearchery.comAlpine Archery is licensed under one or more of the following U.S. patents. #4,241,715 #5,368,006 #5,809,982 #4,748,962 #5,020,507 #6,990,970

Alpine ArcheryPO Box 319

3101 North South HighwayLewiston, ID 83501

208-746-4717