rotary encoder trt/s3 with profisafe over profinet interface · dimensioned drawings design form 58...

2
n PROFINET Real Time (RT) and Isochronous Real Time (IRT) according to IEC 61158/61784 (PNO No. 2712 and 2722) n Conformance class C n PROFIsafe protocol according to PROFIsafe Profile for Safety Technology Version 2.4 n SIL2 and Performance Level D certified n Safe position and speed signal n Parameterisable via PROFINET Rotary encoder TRT/S3 with PROFIsafe over PROFINET interface Compact and robust for automation in mechanical and plant engineering In addition to our tried and tested SIL2-certified PROFIsafe over PROFIBUS rotary encoder, a SIL2- certified PROFIsafe rotary encoder based on the more future-capable PROFINET is now available. The dual-chamber rotary encoder achieves high shock and vibration resistance thanks to its robust design and offers protection types up to IP69K. Its operating temperature range extends from -40°C to +85°C. In addition to a safe position value, the rotary enco- ders also supply a safe speed signal via the PROFIsafe protocol. General data: Resolution: 8192 steps/360° Measuring range: 4096 revolutions Speed signal: 16-bit signed integer (time basis adjustable) Diagnostic LEDs: For supply voltage, link and status Connection: M12 connector or cable outlet Protection type: IP67 or IP69K

Upload: haphuc

Post on 19-Aug-2019

223 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Rotary encoder TRT/S3 with PROFIsafe over PROFINET interface · Dimensioned drawings Design form 58 with clamped flange Design form 65 with synchroniser flange Subject to technical

n PROFINET Real Time (RT) and Isochronous Real Time (IRT) according to IEC 61158/61784 (PNO No. 2712 and 2722)

n Conformance class C

n PROFIsafeprotocolaccordingtoPROFIsafeProfile for Safety Technology Version 2.4

n SIL2andPerformanceLevelDcertified

n Safe position and speed signal

n Parameterisable via PROFINET

Rotary encoder TRT/S3 with PROFIsafe over PROFINET interface

Compact and robust for automation in mechanical and plant engineering

In addition to our tried and tested SIL2-certified PROFIsafe over PROFIBUS rotary encoder, a SIL2-certified PROFIsafe rotary encoder based on the more future-capable PROFINET is now available.

The dual-chamber rotary encoder achieves high shock and vibration resistance thanks to its robust design and offers protection types up to IP69K. Its operating temperature range extends from -40°C to +85°C.

In addition to a safe position value, the rotary enco-ders also supply a safe speed signal via the PROFIsafe protocol.

General data:

Resolution: 8192 steps/360°

Measuring range: 4096 revolutions

Speed signal: 16-bit signed integer (time basis adjustable)

Diagnostic LEDs: For supply voltage, link and status

Connection: M12 connector or cable outlet

Protection type: IP67 or IP69K

Page 2: Rotary encoder TRT/S3 with PROFIsafe over PROFINET interface · Dimensioned drawings Design form 58 with clamped flange Design form 65 with synchroniser flange Subject to technical

Dimensioned drawings Designform58withclampedflange Designform65withsynchroniserflange

Subject to technical modifications and errors! WP16E - 01/17

The data sheet for model TRT/S3 can be found on our homepage under documentation.

Designform58withsynchroniserflange RearsidewithLEDsandconnectors

Multiturn rotary encoder TRT/S3 in the harsh environment of a steel mill for registering lifting and trolley travel drives.

However, they can also be applied in:

nCrane technologyn Rolling and steel millsn Power plantsn Sluice technologyn Printing presses and paper machines

Heinrichstraße 85D-40239 DüsseldorfP.O. Box 105063D-40041 DüsseldorfTelephone: 0211-96117-0Telefax: 0211-63 77 [email protected]

www.twk.de

GmbH

9-0.1

18

36f7

ø

58ø

75 ±0.536

10

30 ±0.5

56ca.

47ca.

10f6

47ca.

18.5

64ca.

12h7

ø

45f7

ø

64.5

ø

60ø

1.5

24.5

83.5 ±0.525 ±0.5

58ø

47ca.

36

81 ±0.5

4

14 ±0.5

50f7

ø

58ø

ø50

62ca.9

5.5

-0.1

6f7

ø

LED-StatusanzeigenLED status displays