Rossini Starcoat Sleeve A superior sleeve, created to provide total dimensional stability

The conductive surface compound is applied to a fibreglass reinforced layer. This dual construction ensures exceptional mechanical strength and con-

stant dimensional tolerance over time.

The perfect choice for Automatic Registration & Impression Setting Systems.

Highly resistant to press solvents.

Recommended for HD Flexo, 4-colour process printing and for extremely subtle highlights and vignettes. ( Shore Hardness 75 D )

This sleeve, with its 3-year warranty, prints multiple images. It is made of conductive materials conforming to work safety standards issued by the

“PTB” (Physikalische Technische

Bundesanstalt – Germany) for flexographic presses.

Technical Data

The following Starcoat tolerance data refers to an air mandrel with a max. T.I.R. of 0.005 mm:

Max. T.I.R. 0,02mm

Max. diametric change over 3 years - 0,02 mm

(working temperature 18 ÷ 40 °C)

Static dispersion < 1 Mega Ohm

Total encapsulation – no absorption of solvent or moisture

Patent pending quick-change protection ring with register slot

Not affected by humidity

Hardness - 75 Shore D

Rossini StarCoat - Sleeves are no longer a short term consumable product.

Rossini CLICK — CLACK

PROTECTION RING

Walk into any flexo print department

that uses plate mounting sleeves

and on inspection you will see

examples of sleeve side wall pin

damage as well as missing & worn

register slots. Our customers have

large amounts of capital tied up in

their sleeve assets. Therefore we

thought it important to offer

improved protection to the higher

cost thicker walled sleeves within

their inventory. This innovation cou-

pled with the fact that the polyure-

thane ring can be changed in house

in only a few seconds by the printer

or plate mounter without the need

for special tools or adhesive. The

Rossini Click Clack Ring protects

your sleeves asset from damage

well into the future.