Data Sheet: Revision 1 Inspection Technologies www.roseninspection.net

Revision Date: 27-Dec-2003

8 Inches HiRes Metal Loss Mapping Tool

CDP08"3 V07.01

Code Application Technology Special data

CDP Metal Loss Mapping Axial MFL 112 MFL Channels

Inspection Specification Pipeline RequirementsInspection Capability * 157.00 km Min. Bend Radius 3.0 D

Operating Time 50.4 h Min. Bore Straight Pipe 176.00 mmMax. Wall Thickness Full Inspection ** 16.60 mm Min. Bore in 3 D Bend 184.00 mm

* At optimum tool speed** Higher wall thickness can be expected at different specifications

Operating Specification Tool SpecificationOptimum Tool Speed 3.80 m/s Rear Sealing Length 1965.00 mm

Velocity Range 0.50 - 3.80 m/s Launch Length 2625.00 mmProduct Temperature Range 0 - 65 C Tool Length 2715.00 mm

Min. Pressure in Gaseous Medium 3.50 MPa Operational Weight n/aMax. Operating Pressure 15.00 MPa Transport Weight n/a

Trap Dimensions

Launcher ReceiverA min. 2715.00 mm A min. 2715.00 mm

B min. 400.00 mm B min. 490.00 mmC min. 152.0 mm C min. 152.0 mmD min. 290.00 mm D min. 2715.00 mm

E min. 10 inch E min. 10 inchH min. 3715.00 mm H min. 3715.00 mm

L min. 3715.00 mm L min. 3715.00 mm

* Alternative Trap Dimensions can be considered Notes:- Subject to change according to specific requirements- Conditions beyond these specifications are to be perused individually