1

Western AustraliaMETROPOLITAN Telephone (08) 9493 8800 • Facsimile (08) 9493 8899

COUNTRY Telephone 1800 218 046 • Facsimile (08) 9493 8899

StramitBuilding Products

Roofing • Walling • Rainwater • Structural Products

Roofing & Walling

16mm

762mm ( 4mm) Cover+ –

BMT0.420.48

MIN PITCH5o

5o

ROOF SPAN (INT/END)*1200/900

1600/1200

29mm

762mm ( 4mm) Cover+ –

BMT0.420.48

MIN PITCH2o

2o

ROOF SPAN (INT/END)* 1700/13502300/1900

43mm

700mm ( 4mm) Cover+ –

BMT0.420.48

MIN PITCH1o

1o

ROOF SPAN (INT/END)*2100/17002700/2250

700mm ( 4mm) Cover

BMT ROOF SPAN (INT/END)* MIN PITCH0.42 2100/17500.48 2700/2250

27mm

1.5°1.5°

Stramit Speed Deck Ultra® Stramit Speed Deck Ultra® decking is a revolutionary concealed fixed roof decking system with unrivalled wind load performance. The wide 700mm cover and unique full-length clip rails provide speed of installation and automatic bird-proofing at all fixing points. The minimum roof pitch of 1 degree allows for a diverse range of design options.• Available in the full colour range

Stramit FarLap® Roof Lap SystemStramit Farlap® units are a unique low profile sealing assembly designed exclusively for lap joints of Stramit Speed Deck Ultra® decking. These easy-to-install snap on units provide an ideal solution for long run lengths and restricted access sites.

Stramit® CorrugatedStramit® Corrugated sheeting is a traditional profile available in a range of colours. With wide cover for quick installation and easy handling, plus a minimum 5° pitch, Stramit® Corrugated sheeting suits traditional and contemporary roof designs.

Stramit Monoclad® Stramit Monoclad® cladding combines economy and practicality with modern design to produce a lightweight, attractive roof and wall profile. The deep ribs provide excellent spanning and high water carrying capacity. The minimum roof pitch of 2° allows for a diverse range of design options.

Stramit® LongspanStramit Longspan® cladding is a good looking, long spanning, high strength roof and wall sheet. Conventional pierce-fixing with only four fasteners per sheet maximises performance and speeds up installation. Minimum roof pitch of 1.5° saves on supporting structure and provides design flexibility.

3

Stramit K-Panel®

Stramit K-Panel® cladding is a low-cost, easy-fix cladding with a broad 864mm cover and low rib height, making it ideal for garage doors, soffit linings, fascias and other cladding applications.• Not suitable for roofing. • Maximum recommended length 6.0m.

Stramit Mini Corry®

Stramit Mini Corry® cladding is an economical and attractive feature panel suitable for walls, awnings, ceilings, soffits and many other applications.• Not suitable for roofing.• Maximum recommended length 6.0m.

Stramit Minirib®

Stramit Minirib® cladding is a low-cost ribbed panel suitable for internal wall linings, fascias, eaves, transport siding and transportable buildings.• Not suitable for roofing. • Maximum recommended length 6.0m.

Stramit Miniseam™ Interlocking CladdingThis low-profile wall cladding combines the cost-effectiveness of the established Minirib® profile with an elegant edge location. The interlocking ends provide an unobtrusive finish that is ideal for economical low-rise buildings.

Stramit Sunset® Patio Roof Panels Designed specially for the home improvement market to make it easy to create stylish verandas, patios, barbecue areas and carports. The unique design gives the underside of the roof a continuous surface to keep out dust, while the interlocking panels provide strength and a weather-tight seal. This integrated patio roof system can be supplied with beams and accessories such as gutters, flashing and downpipes, as well as translucent panels in opal shade for natural lighting. Available ex East.

Stramit Uniguard™ Fire Resisting WallSuperior fire rated wall cladding system combining single layer of specialist fireboard Promina® 60 with choice of Stramit® steel cladding products. Suitable as external wall system for single storey Class 7b and 8 buildings of Type C construction. Note: Promina® 60 board cannot be purchased independently of other Stramit Uniguard™ wall system components.

Roofing & Walling

* Roof spans shown are for ‘normal’ residential conditions and must not exceed those for N2 wind conditions as defined in AS4055.

825mm ( 6mm) Cover

BMT WALL SPAN (INT/END)* PERFORATED SPAN0.42 1200/10000.48 1200/1000 1000/900

6mm

850mm Cover (with overlap side laps)900mm Cover (with edge side laps)

BMT WALL SPAN (INT/END)*

4mm

0.42 1200/1000

290mm ( 4 cover)

45mm

850mm Cover

BMT WALL SPAN (INT/END)*0.42 1200/1000

Stramit® Monoclad

Spacing Batten

Girts

Promina®60

Side

864mm ( 4mm) Cover

BMT WALL SPAN (INT/END)*0.350.42

1500/12501700/1400

12mm

Rainwater Products

4

Stramit Easiline® Commercial GutterA high front, square gutter with large water carrying capacity. Stramit Easiline® Commercial Gutter is ideal for flat roofs, garages and sheds. Available in ZINCALUME® finish and the full range of COLORBOND® colours.

Stramit Easiline® Patio GutterStramit Easiline® Patio Gutter is an ideal gutter for home improvements and patios. It has an attractive square profile and a reverse lip that fits on to patio tube, RHS or framing for new installations. Available in ZINCALUME® and the full range of COLORBOND® colours.

Stramit Easiline® Domestic GutterAnother attractive square profiled gutter that is ideal for home improvements. The reverse lip can be tabbed and folded out, providing maximum versatility when replacing existing guttering. Available in ZINCALUME® and the full range of COLORBOND® colours.

Stramit Trad-line™ GutterThis gutter has a traditional colonial style appearance and is compatible with Stramit Strongline® Fascia. Available in both slotted and unslotted in ZINCALUME® and the full range of COLORBOND® colours.

85mm

25mm

125mm

115mm

115mm

109mm

70mm

109mm

89mm 107mm

60mm

70mm

28mm

140mm

5

Rainwater Products

Stramit Strongline® FasciaStramit Strongline® Fascia is a stepped fascia made from high-tensile steel developed specifically for use in the West. The step in the fascia makes it easy to attach Stramit Trad-Line™ Gutters and provides continuous support. The combination is an attractive fascia-gutter solution that is always straight and true. Comes in ZINCALUME® and the full range of COLORBOND® colours.

Stramit® DownpipesRectangular: Standard sizes 95mm x 45mm, 100mm x 50mm and 100mm x 75mm. Also available in 75 x 50, 100 x 100 and 150mm x 100mm in a range of standard lengths.

Round: Standard sizes 75mm and 100mm only. Both downpipe styles are complemented by a range of accessories including straps, nozzles, offsets and rainwater heads. Available in all finishes.

Stramit® Roll Top RidgeA very attractive product for the roof ridge, available in ZINCALUME® and the full range of COLORBOND® colours.

Stramit® Stepped Roll Top RidgeStramit® Stepped Roll Top Ridge has a narrower profile than Stramit Roll Top Ridge and is stepped to add visual interest as well as strength. Also available in ZINCALUME® and the full range of COLORBOND® colours.

Stramit® Valley GutterAvailable in the full range of colours to match your preferred roof sheeting.

Stramit® Flashing RangeStramit Building Products has a range of flashing, barge caps, corner trims and foot moulds to enhance any gutter or roofing profile and any architectural style. All available in ZINCALUME® and COLORBOND®.

• Available cut to length up to 8.0m.

10mm

190mm

10mm69mm

10mm60mm

350mm

350mm

10mm

140mm

100mm

37mm

21mm

31mm

177mm

10mm

190mm

Punched and Unpunched available

55mm

300mm

6

Structural Products

Stramit® C&Z PurlinsStramit Building Products offers a full range of purlins, including 100, 150, 200, 250, 300, 350 and 400 series in both C and Z profiles. Downturn Lip in C & Z profiles in 150, 200 and 250 sizes and Stramit Exacta® Z-purlins in 150 to 350 sizes for use as roof purlins or wall girts, all cut to length. Heavy duty Z350 Galvaspan® coating ensures long-term protection. Stramit Building Products also offers a snap-in purlin bridging system for quick installation.

Stramit Condeck HP®

Permanent metal formwork for suspended concrete slabs. Stramit Condeck HP® steel decking is supplied to site cut-to-length for speedy installation. Saves on formwork and provides a ready-finished ceiling.

• Edgeform available in various sizes up to 8.0m long.

Stramit® Lightweight Structural SectionsStramit manufactures a range of lightweight Framing Sections for domestic roofing, garages, sheds, partitioning, etc. These include Roof and Ceiling Battens, Top Hats, Stud Sections, Cyclone rated Roof Battens and Patio Beams.

Stramit® BattensStramit® Roof and Ceiling Battens are available as 50mm Roof Battens, 25mm Ceiling Battens and 40mm Tile Battens in stock lengths.

Stramit® Wall FramingStramit® wall framing includes plate, stud, nogging and crimped stud sections.

Stramit® Steel Floor FramingThe system combines Stramit® structural members with Steel-MAX™ brackets and accessories. Stramit® steel floor framing offers significant savings through its simplicity and speed of installation.

Now you can order a complete steel sub-flooring package, individually designed, engineered, certified, and delivered with all required components.

Nogging

Stud

Plate

Roof Batten50mm

Ceiling Batten24mm

7

Stramit® FlumesGas Flumes and Cowls are available in ZINCALUME® finish and the full range of COLORBOND® colours to match the roof sheeting. To ensure an ideal fit, the pitch of the roof should be specified when ordering.

Stramit® RainheadsSquare Rainwater Heads are available in stock sizes or to order. Contact your local Stramit sales office for details of sizes, or with your special requirements. Nozzle size and position must be specified when ordering. Stramit® Rainwater Heads are available in ZINCALUME® and COLORBOND® finishes.

Stramit® SumpsContact your local Stramit sales office for a range of sizes, or with your special requirements.

Stramit® Rolled BargeWhy settle for flat edges when you can finish your roof with an attractive Stramit® Edge Roll or Rolled Barge? They add the perfect touch of authenticity to traditional and heritage buildings and also look great on modern roofs. Available made to order in your preferred shape in COLORBOND® and ZINCALUME®, cut to length.

Fencing Products

* Drainage from one material into another can cause premature corrosion. Please check with your nearest Stramit office for details.

Post Ball

Post Cap

Fence Post

Sawtooth Infill Sheet

Standard Lattice

Fence Rail

Stramit® Modular Steel FencingStramit® Steel Fencing is made from high quality steel in a wide range of designer colours to suit any home, garden or lifestyle. Stramit Fencing is available in traditional and sawtooth profiles, requires low maintenance and is fire and termite resistant.

• Plinth. • Gates. • New profiled post.

SmartSlat LouvresDurable, attractive slats and louvres. Unique two-part design conceals the fasteners. SmartSlat louvres come in three widths and are ideal for fences, gates, sunshades, garden features, fixed louvre panels and more. Strong steel construction resists impact and denting.

Custom Products

SmartSlat 2-piece Louvre

600mm

70mm

150mm

Offset Bracket

6868

Manor Red®

Classic Cream™ Ironstone®

Evening Haze® Night Sky®

Monument®

Monument®

Cottage Green®

Pale Eucalypt® Wallaby™

Wallaby™

Deep Ocean®

Woodland Grey® Terrain®

Jasper™

Paperbark®

Basalt®

Dune® Cove™

Shale Grey™ Gully™

Windspray® Mangrove™

Surfmist®

Facade®

Axis™ Cortex®

Citi®Conservatory®

Skybridge®

Surfmist®

Dune®

Woodland Grey®

Windspray®

Dune®

Surfmist®

Windspray®

Deep Ocean®

COLORBOND® Steel Colour Range

COLORBOND® Stainless Steel

COLORBOND® Ultra Steel

COLORBOND® Metallic Steel

Premium finishes Standard colours

® Trade marks of Stramit Corporation Pty Limited ABN 57 005 010 195 Trading as Stramit Building Products. A member of the Fletcher Building Group. COLORBOND® ZINCALUME® GALVASPAN® and COLORBOND® Colour Names are trademarks of BlueScope Steel Limited. © Stramit Corporation Pty Limited, December 2013

Many colours and finishes are kept in stock for fast manufacture and delivery. However, some colours and finishes require longer lead times and, in some cases, minimum order quantities. Check with your Stramit Building Products representative before ordering.

Note that not all products are available in all finishes.

The COLORBOND® prepainted steel colours shown in this brochure have been reproduced to represent actual product colours as accurately as possible. However we recommend checking your chosen colour against an actual sample of the product before purchasing as varying light conditions and limitations of the printing process affect colour tones.

Distributed by: