ron’s auto service ltd. · heavy dust in summer or in a batch plant environment, equipment (i.e....

___________________________________________________________________________ Ron’s Auto Service Ltd

& Equipment Rentals www.ronsauto.ca

i

RON’S AUTO SERVICE LTD. AND EQUIPMENT RENTALS

103 Kam Lake Road Yellowknife NT X1A 0G5

Ph: 867-766-6025 Fax: 867-873-4871 e-mail: [email protected]

2018 Rental Rate Guide ➢ All Pricing, Business Hours and Terms subject to change without notice ➢ All equipment subject to availability ➢ Buy out formula for units on rental attached ➢ Formula for overtime rates on units with hour meters attached.

NOTE: Over time on equipment rentals may be applied. Regular hours are based on: Day = 8hrs Week = 40hrs 4 Weeks = 160hrs

http://www.ronsauto.ca/

mailto:[email protected]



ii

RON’S AUTO SERVICE LTD & EQUIPMENT RENTALS (RAS) Offers our customers well maintained equipment at the fairest possible rental rates. Naturally we are in business to make a fair profit in order to provide our customers with the most up to date equipment and to assist them in completing their work economically. INSURANCE Once equipment leaves our building the customer is fully responsible until its’ return. BUSINESS HOURS Open from 8:00AM to 5:30PM Daily and from 9:00AM to 2:00PM Saturdays. RENTAL CONDITIONS

❖ All rentals require proper identification ❖ All rentals require a full address or Lot & Block number where equipment is to be used. ❖ Signed Visa or Master Card slip must be left as a deposit if there is no account

established ❖ Check all equipment taken out against rental slip before you sign ❖ Shortages at the time of return are charged ❖ Any abnormal repairs or cleaning are charged for ❖ Make sure all rental returns are checked by shop staff. ❖ Finalize all paper work in our office. ❖ Make sure you receive a rental return slip itemizing everything returned

PICK-UP & DELIVERY Rental rates do not include delivery. The rental starts and stops at our building, where rental originates. Delivery and pick-up charges are extra. (See rate schedule for costs). RAS will provide pickup and delivery to the expediter at no charge with the exception of larger pieces of equipment. FUEL CONSUMPTION All equipment requiring fuel leaves our premises with full tanks. Upon return, tanks are filled and quantity used is charged to customer. RENTAL PERIOD One (1) day rental expires after twenty-four (24) hours and allows up to eight (8) hours use. Every day is a rental day. One week rental allows for forty (40) hours use and a 4 week period allows for one hundred sixty (160) hours of use. OVERTIME CHARGES Overtime hours apply to all equipment except light towers, calculated at 200 hours/4 week period. Please see calculation sheet located on page 9 for formulas. LONG TERM RENTALS Published rental rates are based on short term needs "hourly, daily, weekly or 4 weeks”. Through advanced negotiations and with a guaranteed term rental, we will submit a long term rate. Also a lease plan is available. BUY OUT FORMULA RAS has a buyout program based on percentage of Rental paid then credited back at the time of purchase. Percentage formula based on retail price, i.e. 1st (4) week period 50%, 2nd (4) week period 50%, 3rd month 50%, 4th month 40% and so forth. Please see page 9 for complete details.




iii

SERVICE RATES & REQUIREMENTS FOR RENTAL EQUIPMENT In Shop service rates are $180/hour Service call in town (locally) $180/hour Service out of town or camp calls $125 - $180/hour

❖ Charges start from time of leaving either driving or arriving at airport till return to airport. ❖ Maximum 12 hour day, Minimum 8 hour day.

If Ron’s Auto’s equipment is required for long term and the mechanics are required on a full time basis or for regular service schedule (program) then labour rates can be negotiated If the service call is for equipment rented and owned by Ron’s Auto Service and if the equipment is out of town, the Renter is responsible for travel, and travel time of technician, until arrived at the equipment to be repaired. Rental customers are responsible for abuse, misuse and damages to the equipment. Rental customer is responsible for servicing of equipment on long term rentals. Example: Every 250 hours all units with diesel/gas engines require service, oil change, oil filter,

fuel filter, air filter, belts, fluid levels etc. Every 50 hours on portable equipment i.e. (plate tampers, generators, water pumps, etc.).

All rental equipment is supplied with hostile and cold climate packages (arctic fluids, hoses, heaters & lights if necessary). Preferred rental rates may be negotiated if we are also providing service and parts. EQUIPMENT SAFETY CERTIFICATIONS All RAS equipment is inspected and serviced after each rental, as we keep our equipment ready to go for long or short term rental and possibly to a remote location. RAS has a reputation that our equipment works when it gets to site. Our equipment has factory check list inspections performed yearly or more depending on hours. RAS also has some equipment that has undergone nondestructive testing (NDT) and is Engineer Certified. Fifty percent of our lifts are NDT certified at this time. As a rule if customer requires NDT testing, the costs for engineer would be the responsibility of the customer. There are certain exceptions to this i.e. term of rental. Approximate cost $500-$1500 per unit for this inspection. OTHER RELATED COSTS FOR SERVICE, INSPECTIONS, REPAIRS, PARTS, ETC. Any non-OEM equipment or options required may incur extra charges (fire extinguishers / wheel chocks). Quotes available upon request. Renter is responsible for equipment maintenance.

❖ Large Diesel Equipment - service required every 250 hours ❖ Small Diesel Equipment - service required every 50 hours ❖ Small Gas Equipment - service required every 50 hours

**Service charges apply to overdue services on equipment – chargeable by the hour at $3.00/hour.




iv

Hydro oil needs inspection, changing or testing at 1500 hours. In extreme conditions such as heavy dust in summer or in a batch plant environment, equipment (i.e. Skid-steer/Generator) may require filter changes more often. RAS offer parts, filters, belts etc. at a very competitive price. In general, customer is responsible for tires, bulbs, belts, etc. classed as maintenance items. In the case of other items, such as batteries, each repair would have to be determined at the time of failure. RAS will be fair and honest with customer on these issues and will accept responsibility to supply normal wear and tear items. If failure is due to the extreme conditions encountered; customer is responsible. The cold weather climate does create more breakdowns (i.e. hoses, joysticks, fuel filters, air filters, fuel conditioner and other extra expenses). We must work together on failed items as they would require some discussion. For example, if starter failure is due to normal wear or due to over cranking because unit was run out of fuel, had not been plugged in or been boosted. HYDRAULIC HOSES RAS units are all arctic based. If hose fails due to age then RAS may assume responsibility for this item. If hose fails due to extreme cold then that is customer’s responsibility. In case of breakdowns, RAS does allow equipment to be exchanged or swapped out provided unit and shipping available. We can offer down time if a problem is reported and an inspection is carried out by RAS technician, as soon as possible after breakdown. As well, allowance for freight time to site for the repair parts is reasonable. RAS will make every effort to be on site within one day to trouble shoot problems as long as technician and travel is available. All parts are FOB Yellowknife, unless quoted or requested, otherwise. SAFETY TRAINING Training is available for Aerial Equipment / Forklifts / Skid Steers / Telehandlers / Loaders / Mini Excavators / Fall Protection rates are $180/ hour –or- per student (depending on class size). Please call for rates. PRICES Prices are subject to change without notice. SCAFFOLD

Rules for safe operation are located on page 18 & 19.


TABLE OF CONTENTS

BOARDROOM / CLASSROOM....................................................................................................... 12

BUY OUT FORMULA ...................................................................................................................... 13

BUY OUT REQUEST ....................................................................................................................... 14

CALCULATION FOR OVERTIME CHARGES ................................................................................ 15

DELIVERY / PICK UP RATES......................................................................................................... 16

RENTAL AGREEEMENT ................................................................................................................ 17

SCAFFOLD GUIDELINES ............................................................................................................... 18

SCAFFOLD SAFETY RULES ......................................................................................................... 19

AERIAL WORK PLATFORM........................................................................................................... 20

SCISSOR LIFTS ELECTRIC BATTERY POWERED - SELF PROPELLED ......................................... 20 DUAL FUEL DIESEL SCISSOR LIFTS ................................................................................................. 20 ELECTRIC BOOM LIFTS ARTICULATING/KNUCKLE ...................................................................... 20

AERIAL WORK PLATFORM........................................................................................................... 21

BOOM LIFTS STRAIGHT BOOM ......................................................................................................... 21 MATERIAL LIFT .................................................................................................................................... 21

AIR EQUIPMENT ............................................................................................................................. 22

AIR COMPRESSORS ............................................................................................................................. 22 3,000LBS SHORT / LONG DRUM......................................................................................................... 23 POGO STICK I-R / ATP ......................................................................................................................... 23 1/4" X 50' ................................................................................................................................................ 23

AIR TOOLS ...................................................................................................................................... 25

AUGERS .......................................................................................................................................... 26

SOIL........................................................................................................................................................ 26 ICE.......................................................................................................................................................... 26

AUTO TOOLS AND SHOP EQUIPMENT ....................................................................................... 27

CARPENTRY TOOLS ...................................................................................................................... 29

CHAINS & BOOMERS .................................................................................................................... 29

COME ALONGS / CHAIN FALLS / TIRFORS **ALSO SEE PG61................................................ 29

COMPACTION ................................................................................................................................. 31

TAMPER RAMMERS ............................................................................................................................. 31 PLATE TAMPERS .................................................................................................................................. 31

CONCRETE EQUIPMENT ............................................................................................................... 32

CONSTRUCTION EQUIPMENT ...................................................................................................... 35

CONVEYOR EQUIPMENT .............................................................................................................. 35

DIAMOND PRODUCTS ................................................................................................................... 37

BLADE RENTAL .................................................................................................................................... 37

DIAMOND PRODUCTS ................................................................................................................... 38

CORE BIT RENTAL ............................................................................................................................... 38

DRILLS AND GRINDERS ................................................................................................................ 39

DISPENSERS / CAULKING GUNS ....................................................................................................... 43

DRILL STEEL & BITS ..................................................................................................................... 43

ELECTRICAL ................................................................................................................................... 46

EXCAVATORS................................................................................................................................. 47

BREAKERS ............................................................................................................................................. 47 EXTRA BUCKETS .................................................................................................................................. 48

FANS ................................................................................................................................................ 49

FLOORING EQUIPMENT ................................................................................................................ 50

SHOP VACS ........................................................................................................................................... 50 FLOOR SANDERS ................................................................................................................................. 50 FLOOR MAINTAINER ........................................................................................................................... 51

FORKLIFTS ..................................................................................................................................... 53

TELEHANDLER (ZOOM BOOMS) ....................................................................................................... 53 ATTACHMENTS/PARTS ........................................................................................................................ 53

GENERATORS ................................................................................................................................ 54

GENERATORS / LIGHT PLANTS ................................................................................................... 56

LIGHT TOWERS (TRAILER MOUNTED)............................................................................................. 56

HEATERS ........................................................................................................................................ 57

KEROSENE FIRED ............................................................................................................................... 57 KEROSENE FIRED/ELECTRIC DRIVEN ............................................................................................. 57 KEROSENE/DIESEL FIRED - ELECTRIC DRIVEN ............................................................................ 57 CLEAN AIR FROSTFIGHTERS ............................................................................................................. 58

HAMMERS ....................................................................................................................................... 61

IN-VIRO DRUM ................................................................................................................................ 61

JACKS AND HOISTS ...................................................................................................................... 62

JACKS AND HOISTS ...................................................................................................................... 63

COME ALONGS / CHAIN FALLS / TIRFORS ...................................................................................... 63

LADDERS ........................................................................................................................................ 64

STEP LADDERS..................................................................................................................................... 64 EXTENSION LADDERS......................................................................................................................... 64 7-11ft M-13 ALUMINUM LADDER 3-5ft STEP .................................................................................... 64

LAWN AND GARDEN EQUIPMENT ............................................................................................... 65

LAWN AND GARDEN EQUIPMENT ............................................................................................... 66

LEVELS ............................................................................................................................................ 68

LIGHTS ............................................................................................................................................ 69

LOADERS (SKIDSTEER) ................................................................................................................ 70

LOADERS (SKID-STEER MINI TRACK LOADERS) ..................................................................... 71

LOADERS (SKID-STEER ATTACHMENTS)* ................................................................................ 71

LOADERS (SKID-STEER ATTACHMENTS)* ................................................................................ 72

LOADERS (SKID-STEER PARTS & ACCESSORIES) .................................................................. 73

LOADERS ........................................................................................................................................ 73

LOADERS (BACKHOE) .................................................................................................................. 73

PAINT & WALLPAPER EQUIPMENT ............................................................................................. 74

PARTY EQUIPMENT ....................................................................................................................... 74

PIPE CUTTERS ............................................................................................................................... 75

PIPE STANDS.................................................................................................................................. 75

PLUMBING EQUIPMENT ................................................................................................................ 75

PLUMBING EQUIPMENT ................................................................................................................ 76

PRESSURE WASHERS .................................................................................................................. 77

PUMPS ............................................................................................................................................. 78

PUMPS ............................................................................................................................................. 79

DISCHARGE HOSE ............................................................................................................................... 80 DISCHARGE HOSE (PLASTIC LAYFLAT)........................................................................................... 80 SUCTION HOSE (BLACK OR RED RUBBER) ..................................................................................... 81 FUEL TRANSFER HOSE ....................................................................................................................... 81 GARDEN HOSE ..................................................................................................................................... 81

REBAR BENDERS / SHEARS ........................................................................................................ 82

SAFETY EQUIPMENT ..................................................................................................................... 82

SANDERS ........................................................................................................................................ 83

SAWS ............................................................................................................................................... 85

SAWS ............................................................................................................................................... 86

SCAFFOLDING................................................................................................................................ 88

SNOW CLEARING EQUIPMENT .................................................................................................... 91

SNOWMOBILES, SLEIGHS, OUTBOARDS & ATV’S ................................................................... 92

SNOWMOBILES, SLEIGHS, OUTBOARDS & ATV’S ................................................................... 93

STAPLERS AND NAILERS............................................................................................................. 94

STRAPPING & BINDING ................................................................................................................ 95

TOOL BOXES / CARRY CASES / SEACAN .................................................................................. 95

TRAILER RENTAL RATES ............................................................................................................. 96

TRACTORS ...................................................................................................................................... 96

WELDING, TORCHES AND CUTTING OUTFITS .......................................................................... 97

WELDING, TORCHES AND CUTTING OUTFITS ........................................................................ 100

INDEX

A

AERATOR (Lawn) .......................................................................................................................................................... 65

AIR COMPRESSOR ........................................................................................................................................................ 22

ARGO

ATV ARGO ................................................................................................................................................................. 92

TRAILER ATV TUB .................................................................................................................................................. 93

AUGER ................................................................................................................................................................ 26, 72, 75

B

BATTERY CHARGER

Charger ........................................................................................................................................................................ 27

BBQ .................................................................................................................................................................................. 74

BLOWER

BACKPACK BLOWER.............................................................................................................................................. 66

BOBCAT .......................................................................................................................................................................... 70

BOLT CUTTER ............................................................................................................................................................... 27

BOOMERS ...................................................................................................................................................................... 29

BREAKER ..................................................................................................................................................... 22, 40, 41, 44

BULL FLOAT................................................................................................................................................................... 33

C

CABLE ................................................................................................................................................................. 27, 75, 98

WELD CABLE............................................................................................................................................................ 98

CARBIDE ....................................................................................................................................................... 40, 51, 83, 87

CARPET EXTRACTOR................................................................................................................................................. 50

CARPET KICKER .......................................................................................................................................................... 50

CEMENT MIXER ............................................................................................................................................................ 32

CHAINSAW ............................................................................................................................................. 82, 83, 85, 87, 95

CHAINSAW WINCH ...................................................................................................................................................... 63

CHIPPER ................................................................................................................................................................... 22, 66

CHOCKS ......................................................................................................................................................................... 83

CLAY SPADE ........................................................................................................................................................... 40, 44

COME ALONG ......................................................................................................................................................... 29, 63

CORDS - EXTENSION ................................................................................................................................................... 46

CORE DRILL............................................................................................................................................................. 34, 42

CORESPLITTER ............................................................................................................................................................ 38

CRANE

ENGINE CRANE .................................................................................................................................................. 27, 62

CRIMPER

AIRCRAFT CABLE CRIMPERS............................................................................................................................... 95

BATTERY CABLE CRIMPERS ................................................................................................................................ 95

CUBE OIL ........................................................................................................................................................................ 82

CUTTING OUTFIT ......................................................................................................................................................... 97

CYLINDER DEGLAZER ................................................................................................................................................ 27

CYLINDER HONE .......................................................................................................................................................... 27

D

DOLLY ............................................................................................................................................................................. 62

DRILL

AIR DRILL.......................................................................................................................................... 22, 23, 25, 39, 40

ANGLE AIR DRILL ................................................................................................................................................... 25

ROTARY HAMMER .................................................................................................................................................. 39

SCREW GUN .............................................................................................................................................................. 52

DRILL PRESS........................................................................................................................................................... 27, 40

DRY WALL LIFT ............................................................................................................................................................. 62

E

EARTH AUGER .............................................................................................................................................................. 26

EXTENSION CORDS ...................................................................................................................................................... 46

F

FAN

AIR MOVER ............................................................................................................................................................... 49

CARPET FAN ............................................................................................................................................................. 49

FENCE PULLER ............................................................................................................................................................ 30

FERTILIZER SPREADER............................................................................................................................................. 65

FLOORSCRAPER ............................................................................................................................................................ 50

FOAM DISPENSING GUN ........................................................................................................................................... 74

G

GAS WINCH ................................................................................................................................................................... 63

GENERATOR

DIESEL GENERATOR ........................................................................................................................................ 54, 55

GAS GENERATOR .................................................................................................................................................... 54

GRINDER ............................................................................................................................................................ 25, 51, 83

ANGLE GRINDER ..................................................................................................................................................... 39

H

HAMMER ......................................................................................................................................................................... 61

SLEDGE HAMMER ................................................................................................................................................... 61

HEATER

ELECTRIC .................................................................................................................................................................. 59

GROUND HEATER ................................................................................................................................................... 58

KEROSENE ................................................................................................................................................................ 57

PROPANE ................................................................................................................................................................... 59

HEATER DUCT .............................................................................................................................................................. 59

HEDGE TRIMMER......................................................................................................................................................... 66

HOSE

DISCHARGE HOSE ............................................................................................................................................. 80, 81

GARDEN..................................................................................................................................................................... 81

SUCTION HOSE ........................................................................................................................................................ 81

I

ICE AUGER ..................................................................................................................................................................... 26

J

JACK.................................................................................................................. See PALLET JACK, See PALLET JACK

FLOOR ........................................................................................................................................................................ 62

HYDRAULIC .............................................................................................................................................................. 62

RATCHET LEVER ..................................................................................................................................................... 62

TRANSMISSION ........................................................................................................................................................ 62

JACKALL ......................................................................................................................................................................... 62

JOINTER ......................................................................................................................................................................... 29

K

KUBOTA .................................................................................................................................................. 47, 48, 73, 92, 96

L

LADDER .................................................................................................................................................................... 64, 90

LANYARD ........................................................................................................................................................................ 82

LAWN EDGER ................................................................................................................................................................ 66

LEVEL .............................................................................................................................................................................. 68

LINO ROLLER ................................................................................................................................................................ 50

LOG SPLITTER .............................................................................................................................................................. 65

M

MAGNETIC LOCATOR (Sweeper) ....................................................................................................................... 43, 68

METAL DETECTOR ...................................................................................................................................................... 68

MOWER ..................................................................................................................................................................... 65, 72

N

NAILER ............................................................................................................................................................................ 94

NIBBLER (Electric)......................................................................................................................................................... 39

O

OIL CUBE ........................................................................................................................................................................ 82

P

PALLET JACK ................................................................................................................................................................ 62

PANEL LIFT .................................................................................................................................................................... 62

PIPE CUTTER MINI....................................................................................................................................................... 75

PLANER........................................................................................................................................................................... 29

Surface Planer ........................................................................................................................................................ 34, 52

POST PULLER ................................................................................................................................................................. 66

PRESSURE WASHER ..................................................................................................................................................... 77

R

RAKE .......................................................................................................................................................................... 65, 66

REBAR BENDER / SHEAR

REBAR BENDER ....................................................................................................................................................... 82

S

SANDBLASTER ............................................................................................................................................................. 84

SANDER .............................................................................................................................................................. 50, 51, 83

SAW ..................................................................................................................................................................... 85, 86, 87

SCISSOR LIFTS ............................................................................................................................................................... 20

SEACAN........................................................................................................................................................................... 95

Seeder ................................................................................................................................................................................ 67

SHOVEL .......................................................................................................................................................................... 66

SHREDDER .................................................................................................................................................................... 66

SNOWBLOWER ................................................................................................................................................. 72, 91, 96

STAPLER ........................................................................................................................................................................ 94

SWEEPER....................................................................................................................................................................... 66

T

TANK

PORTABLE AIR TANK............................................................................................................................................. 25

PROPANE TANK ....................................................................................................................................................... 99

TIDY TANK.......................................................................................................................................................... 81, 82

WATER TANK ........................................................................................................................................................... 85

TARPS ............................................................................................................................................................................. 35

TIGER TORCH ............................................................................................................................................................... 97

TILE CUTTER ................................................................................................................................................................. 33

TOOL CRIB (Van) .......................................................................................................................................................... 93

TORCH ...................................................................................................................................................................... 97, 99

TORQUE WRENCHES ................................................................................................................................................. 28

TRAILER .................................................................................................................................................................... 93, 96

SNOWMOBILE TRAILER .................................................................................................................................. 92, 96

UTILITY TRAILER.................................................................................................................................................... 93

W

WALLPAPER EQUIPMENT .......................................................................................................................................... 74

WHEEL BARROW ............................................................................................................................................. 33, 35, 65

WHEEL BARROW GAS POWERED .................................................................................................................... 33, 35

WINCH - GAS ................................................................................................................................................................. 63

12

RON’S AUTO SERVICE LTD. AND EQUIPMENT RENTALS

103 Kam Lake Road Yellowknife NT X1A 0G5

Ph: 867-766-6025 Fax: 867-873-4871 e-mail: [email protected] website: www.ronsauto.ca

Boardroom / Classroom Room Size: 24’ x 32’ Board table: 5’ x 18.5’

• Table can be adjusted to eight individual tables 2.5’ x 4.5’ for classroom type setting

• 16 adjustable executive chairs

• additional seating available Equipment Poly com conference phone with 2 additional speakers Hands free phone with 3 way conference

ViewSonic LCD Projector High speed internet connection 8’ x 4’ Magnetic white board 13” TV with VCR

Coffee service included in room rental. Rental rate is $350.00 per day. Parking is available outside the main gate. Ron’s Auto Service Ltd is non-smoking. Pop and snack vending machine available on site.

mailto:[email protected]


13

Buy Out Formula

Percentage of rent given back at time of purchase

1 (4) week period 50% 2 (4) week period 50% 3 (4) week period 50% 4 (4) week period 40% 5 (4) week period 30% 6 (4) week period 20% 7 (4) week period 10%

For this to be effective account must be kept current or this can affect the formula. Ron’s Auto Service Ltd reserves the right to change pricing.

BUY OUT FORMULA 1 (4) WEEK PERIOD 50% 2 (4) WEEK PERIOD 50% 3 (4) WEEK PERIOD 50% 4 (4) WEEK PERIOD 40% 5 (4) WEEK PERIOD 30% 6 (4) WEEK PERIOD 20% 7 (4) WEEK PERIOD 10%

14

BUY OUT REQUEST RENTAL

CONTRACT# CUSTOMER # FAX #

DATE OF REQUEST CUSTOMER NAME

PHONE #

DISCOUNTED

QTY ITEM RENTAL RATE RENTAL PERIOD

TOTAL TIME TOTAL RENT RENTAL RETAIL PURCHASE

FROM TO IN 4WK PERIOD PAID % REBATE PER EACH PRICE

TOTAL BUY OUT COST FOR CONTRACT



15

CALCULATION FOR OVERTIME CHARGES

DATE: CUSTOMER NAME: P.O. NUMBER: R.A. NUMBER:

1) Rental Duration: ____________ To ____________ Inclusive - __________ Days

2) Hour Meter Reading: UNIT # HRS. OUT HRS. IN TOTAL HRS

__________ __________ __________ = __________

TOTAL HOUR USAGE __________

3) Allowable Hours Usage: (Covered under regular rates based on 28 day month) 200 Hrs. per Month 50 Hrs. per Week 10 Hrs per Day

Rental Duration: = ______ (Days) = ______ Mth(s) x 200 = __________ ______ Wk(s) x 50 = __________ ______ Day(s) x 10 = __________

TOTAL ALLOWABLE HOURS __________

4) Overtime Hourly Rate:

Net Monthly Rate _________ divide by 200 (Hrs) = $________ Per Hour Factor

5) Overtime Charge: Calculation {a} Total Hour Meter Reading __________ Less Allowable Hours __________ __________ OVERTIME HOURS CHARGABLE (Overtime Hours) _________ X __________ (Per Hour Factor) = __________ {b} Rental Charge before overtime $ ____________ **Overtime Charges shall NOT exceed two (2) times the total rent charged




16

DELIVERY / PICK UP RATES Standard Delivery & Pick-up Charges Delivery $100.00 Pick-up $100.00 Load and unload fees will apply based on $120.00/ hour.

NOTE: CUSTOMER IS RESPONSIBLE FOR LOADING/UNLOADING & SECURING OF LOADS

Price quoted is for pick-up or delivery

Skid-Steers $175.00/hour

Excavator $175.00/hour

Electric Scissor Lifts $175.00/hour

Rough Terrain Scissor Lifts $225.00/hour

Boom Lifts $225.00/hour

Large Boom Lifts $350.00/hour

Large Excavator $225.00/hour

Charges are for deliveries and pick-ups within City limits.


17

RENTAL AGREEEMENT

LEASE By this lease and in consideration of the statements on the reverse side hereof and the following agreements, limitations and conditions, Ron’s Auto Service and Equipment Rentals Ltd. (RAS) hereinafter called lessor, leases unto the person, firm or corporation signing this lease as lessee, hereinafter called lessee, that certain personal property, hereinafter called equipment, described on the reverse side hereof. 1. TERM – Unless otherwise provided on the reverse side hereof, the term of this lease respecting each item of equipment commences on the date of pickup by the lessee or his agent, or, if shipped, the date of shipment by the lessor to the lessee, and ends on

the date of return by the lessee of the equipment to the lessor’s premises. 1 day equals 24 hours with maximum 8 hours operation. 7 days equals 1 week which equals 168 hours with maximum 40 hours operation. 28 days equals 1 month which equals 672 hours with maximum 160 hours operation. Where guaranteed minimum rental period is specified the lessee guarantees to pay the rate specified for the full term of the guaranteed rental period not withstanding early return or early termination of the rental period.

2. RENT - The rent for any and every item of equipment shall be the amount designated on the reverse side hereof and section 30. 3. PAYMENT – All rentals due under this agreement shall be paid monthly, weekly or daily, as the case may be depending upon whether the equipment has been rented by the month, by the week, or by the day, in advance to the office of the lessor. All overdue

payments shall bear interest at the rate of 2% per month (24% per annum) on the unpaid balance without prejudice to the lessor’s rights, and in particular without prejudice to the lessor’s right hereinafter stipulated to terminate the agreement for non-payment of rental

4. LOCATION - The equipment shall be located in the province or territory and at the address designated by the lessee at the time of execution of this agreement and shall not be removed from the said province, territory or from the designated address therein without the lessor’s prior written consent.

5. USE – Lessor shall comply with all laws in anywise relating to the use, operation or maintenance of the equipment. If lessor supplies lessee with labels stating that the equipment is owned by lessor, lessee shall affix and keep the same upon a prominent place on the equipment.

6. ACCEPTANCE – Lessee acknowledges that he has fully inspected and accepted said equipment in good condition and repair. The Lessee further acknowledges, the lessee is familiar with such equipment and the operation thereof and has inspected and accepted said equipment in good operation condition.

7. INSPECTION – Lessor shall at any and all times during business hours have the right to enter into and upon the premises where the equipment may be located for the purpose of inspecting the same or observing its use. Lessee shall give lessor immediate notice of any attachment or other judicial process which affects or may affect any item of equipment and shall whenever requested by lessor advise lessor the exact location of the equipment.

8. LOSS, DAMAGE AND REPAIRS – Lessee hereby assumes and shall bear the risk of loss and damage to the equipment from any and every cause whatsoever and shall keep and maintain the equipment in good repair, condition and working order. No loss or damage to the equipment or any part thereof shall impair any obligation of lessee under this lease which shall continue in full force and effect. In the event of loss or damage of any kind whatsoever to any item of equipment, lessee at the option of lessor, shall place the same in good repair, condition and working order or alternatively, replace damaged or lost equipment at today’s new market value or repair the damaged equipment, the cost of such repairs to be borne by the lessee together with interest on the outstanding balance at the rate of 2% per month (324% per annum) from date of invoice to the date of payment.

9. ALTERATIONS - Without the prior written consent of lessor, lessee shall not make any alterations, additions or improvements to the equipment. All additions and improvements of whatsoever kind or nature made to the equipment shall belong to and become the property of lessor upon the expiration or earlier termination of this lease. The lessee will not alter, remove, disfigure or in anywise change any insignia or lettering upon any of the said equipment. The lessee shall not tamper with: Odometers, Speedometers or Hourmeters on units equipped with same. If these meters show signs of tampering or disconnecting the customer agrees to the following charges at the option of the lessor. Odometers/Speedometers – A charge of 50 KM or 30 miles for each hour the equipment was in the customer’s possession. Hourmeters – A charge of 1 hour for each hour the equipment was in the customer’s possession.

10. DOWN TIME – Should the lessor suffer lost rentals or incur expenses as a result of the unavailability of leased equipment being repaired by the lessee, or lessor, due to damage or loss of the said leased equipment arising during the term of this lease, then such lost rentals and expenses shall be the sole responsibility of the lessee and the lessee shall forthwith pay and/or reimburse the lessor for the same.

11. EXPENSE – During the time of this lease, the lessee shall at the lessee’s own expense, pay the cost of: a) all fuel, oil and lubricants required to operate and maintain the equipment. b) all repairs, replacement parts including labour charges, required to be made to the equipment in order to keep it in good repair and running order.

12. SURRENDER – Upon the expiration or earlier termination of this lease, lessee shall return the equipment to lessor in good repair, condition and working order, ordinary wear and tear resulting from proper use thereof alone excepted. 13. TAXES AND ENCUMBERANCES – Lessee shall keep the equipment free and clear of all levies, liens and encumbrances and shall pay all license fees, registration fees, assessments, charges, taxes and encumbrances (municipal, provincial, territorial and

federal) which may now or hereafter be imposed upon the ownership, leasing, renting, sale, possession or use of equipment, including without limiting the generality of the foregoing, any and all taxes at whatever rates that are currently or may be in effect with respect to sales tax, value added tax and/or goods and services tax.

14. INSURANCE – The lessee shall at the lessee’s own expense maintain liability, theft, fire and any other insurance required to indemnify the lessor against any loss to or of the equipment to the extent of new replacement value at date of replacement or cash equivalent, such insurance to cover the insurable interest of the lessor in said equipment. This insurance shall be kept in full force and effect from the time the equipment is leased out by the lessee or is shipped by the lessor until it is returned by the lessee to the lessor during the lessor’s normal business hours with lessor’s acknowledgement. Customer will, on demand, furnish RAS with a Certificate of Insurance evidencing the applicable coverages. Such certificate(s) shall include liability limits of not less than $2,000,000 per occurrence and shall be endorsed to provide that the applicable insurance policies may not be cancelled or materially modified except on thirty (30) days prior written notice to RAS at the location identified on the front.

15. INSURANCE – The lessee agrees to immediately inform the lessor in writing of all losses or damages to the equipment and provide the lessor the name of the lessee’s insurance company, name and address of the lessee’s insurance agent, a copy of the police report and complete information concerning insurance coverage for said loss or damage. The Lessee further hereby assigns and grants a security interest to the Lessor to any and all proceeds payable from any claims or otherwise generated from insurance coverage over any and all of the personal property covered by this Agreement.

16. LESSOR’S PAYMENT – In case of failure to procure or maintain said insurance or to pay said fees, assessments, charges and taxes, all as hereintofore specified, lessor shall have the right, but shall not be obligated, to effect such insurance or pay said fees, assessments, charges and taxes as the case may be. In that event, the cost thereof shall be re-payable to the lessor with the next installment of rent, and failure to repay the same shall carry with it the same consequence, including interest at the rate of two percent (2%) per month (twenty-four (24%) per annum), as failure to pay any installment of rent.

17. WARRANTIES – Lessor makes no warranties, either expressed or implied, as to any matter whatsoever, and not restricting the generality of the foregoing, the condition of the equipment, its merchantability or fitness for any particular purpose. All sales of new or used equipment shall be on an “as is – where is” basis without any warranty of any nature whatsoever, excepting only such warrant, if any, as may be provided by the manufacturer directly to the purchaser with respect to new equipment.

18. FORCE MAJEURE – Lessor shall incur no liability whatsoever for any delay or failure to deliver the equipment or for any delay or failure to perform any of its obligations hereunder by reason of strike, lockout, threat of strike or lockout, fire, flood, interruption or delay in manufacture or transportation, act of nature, war, insurrection, mob violence, requirement of governmental authorities, embargo, shortage of labour, equipment or materials, plant breakdown or any other causes beyond the control of lessor whether or not such causes of delay or failure are in existence whether or not known to lessor at the time of completion of this agreement.

19. INDEMNITY – Lessee shall indemnify lessor against, and hold lessor harmless from any and all claims, actions, suits, proceedings, costs, expenses, damages and liabilities, including solicitor’s costs, on a solicitor-client basis, arising out of, connected with, or resulting from the equipment, including without limitation, the manufacture, selection, delivery, possession, use, operation or return of the equipment.

20. SECURITY – As security for the prompt and full payment of the rent, and faithful and timely performance of all provisions of this lease, and any extension or renewal thereof, on its part to be performed, lessee has pledged and deposited with lessor the amount set forth on the reverse side hereof. In the event any default shall be made in the performance of any of the covenants on the part of lessee herein contained with respect to any item or items of equipment, lessor shall have the right, but sha ll not be obligated to apply said security to the curing of such default. Any such application by lessor shall not be a defense to any action by lessor arising out of said default; and, upon demand, lessee shall restore said security to the full amount set forth in the schedule. Upon the expiration, or earlier termination, of this lease, or any extension or renewal thereof, provided lessee has paid all of the rent herein called for and fully performed each and all of the other provisions of this lease on the part to be performed, lessor will return to lessee any remaining balance of said security. The Lessee hereby further confirms that this Agreement and any extension or renewal or replacement hereof constitutes a security interest. The Lessee agrees and consents to the Lessor filling any and all documentation required by any governmental authority whatsoever in any jurisdiction requiring registration of any such security interest, or interests, as are created by this Agreement and agrees to reimburse and indemnify the Lessor for any expenditure that might be incurred in registering any documentation required by any jurisdiction or governmental authority in that regard. The Lessee acknowledges receipt of a duplicate copy of this Agreement and waives his right to receive a copy of any document verifying registration of this Agreement.

21. DEFAULT – If lessee with regard to any item or items of equipment fails to pay any rent or other amount herein provided within ten (10) days after the same is due and payable, or if lessee with regard to any item or items of equipment fails to observe, keep or perform any other provision of this lease required to be observed, kept or performed by lessee, lessor shall have the right at its sole discretion to exercise any one or more of the following remedies: a) To declare the entire amount of rent hereunder immediately due and payable as to any or all items of equipment. b) To sue for and recover all rents, and other payments then accrued or thereafter accruing, with respect to any or all items of equipment. c) To take possession of any or all items of equipment without demand or notice, wherever same may be located without any court order or other process of law. Lessee hereby waives any and all damages occasioned by such taking of possession.

Any said taking of possession shall not constitute a termination of this lease as to any or all items or equipment unless lessor expressly so notifies lessee in writing. d) To terminate this lease as to any or all items or equipment. e) To pursue any other remedy at law or in equity. Notwithstanding any said repossession, or any other action which lessor may take, lessee shall be and remain liable for the full performance of all obligations on the part of the lessee to be performed

under this lease. All such remedies are cumulative, and may be exercised concurrently or separately.

22. BANKRUPTCY – Neither this lease nor any interest therein is assignable or transferable by operation of law. If any proceeding under the Bankruptcy Act, as amended, is commenced by or against the lessee, or if the lessee is adjudged insolvent, of it the lessee makes any assignment for the benefit of his creditors, or if a writ of attachment or execution is levied on any item or items of the equipment and is not released or satisfied within ten (10) days thereafter, or if a receiver is appointed in any proceeding or action and given authority to take possession or control of any item or items of the equipment, lessor shall in its sole discretion have and may exercise any one or more of the remedies set forth in paragraph 21 hereof; and this lease shall, at the option of the lessor, without notice, immediately terminate and shall not be treated as an asset of lessee from the date of the exercise of said option.

23. LESSOR’S EXPENSE – Lessee shall pay lessor all costs and expenses, including solicitor’s fees on a solicitor/client basis incurred by lessor in exercising any of its rights or remedies hereunder or enforcing any of the terms, conditions, or provisions hereof including any costs of removal of the said equipment.

24. ASSIGNMENT – Without the prior written consent of lessor, lessee shall not: a) assign, transfer, pledge, or hypothecate this lease, the equipment, or any part thereof or any interest therein, or b) sublet or lend the equipment or any part thereof to be used by anyone other than lessee. All rights of lessor hereunder may be assigned, pledged, mortgaged, transferred or otherwise disposed of, either in whole or in part without notice to lessee.

25. OWNERSHIP – The equipment is, and shall at all times be and remain, the sole and exclusive personal property of lessor; and the lessee shall have no right, title or interest therein or thereto except as expressly set forth in this lease. 26. PERSONAL PROPERTY - The equipment is, and shall at all times be and remain personal property notwithstanding that the equipment or any part thereof may now be, or hereafter become, in any manner affixed or attached to, or imbedded in, or

permanently resting upon, real property or any building thereof, or attached in any manner to what is permanent as by means of cement, plaster, nails, bolts, screws or otherwise. The lessee acknowledges that any property of the lessor that is affixed or attached to any other property is solely for the better use of the lessor’s property.

27. OFFSET – Lessee hereby waives any and all existing and future claims, and offsets, against any rent or other payments due hereunder, and agrees to pay the rent and other amounts hereunder regardless of any offset or claim which may be asserted by lessee or on its behalf.

28. NON WAIVER – No covenants or conditions of this lease can be waived except by the written consent of lessor. Forbearance or indulgence by lessor in any regard whatsoever shall not constitute a waiver of the covenants or conditions to be performed by lessee to which the same may apply, and, until complete performance by lessee of said covenants or conditions lessor shall be entitled to invoke any remedy available to lessor under this lease or by law or in equity despite said forbearance or indulgence.

29. TIME BASIS OF RATES – The rental rates herein are based upon the general practice industry of one shift of 8 hours per day, 40 hours per week, and 160 hours per a 4 week period, and if the equipment is used for periods in excess of the general practice, overtime will be charged. If the equipment is rented by the day, the rate for overtime is 1/8 th of the daily rate for each hour in excess of eight. If it is rented by the week, the rate for overtime is 1/40 th of the weekly rate for each hour in excess of 40. If it is rented by 4 weeks overtime rate is 1/160th of the monthly rate for each hour in excess of 160 hours in any one 28 consecutive day period. Lessee shall advise Lessor when equipment is used more than a single shift. Rental rates shall not be subject to any deduction for any non-working time during the rental period, nor because the lessee returns the equipment to the lessor before the expiration of the minimum rental period. All charges will be calculated using the best combination of daily, weekly, and monthly to give the lowest possible charges.

30. LOADING, UNLOADING AND TRANSPORTATION – The lessee at his own expense shall load the equipment for transit and shall unload the said equipment upon its return. The lessee shall pay all shipping expenses from the original point of shipment to his receiving point and all return shipping expenses to the lessor’s yard. Lessor assumes no responsibility for hook-up of trailer mounted units or loading equipment.

31. LIEN – The lessee acknowledges that the lessor has a right to file a lien, under the appropriate legislation against the owner of the land where the equipment was used should rental payments not be forthcoming. 32. DISCLOSURE – The lessor shall disclose fully and accurately the identity and address of those who will be using the equipment. 33. SEVERABILITY – If any part of this agreement be declared or held invalid or unenforceable for any reason, such invalidity or unenforceability shall not affect the validity and enforceability of the remainder which shall continue in force and effect and be

construed as if this agreement had been executed without the invalid or unenforceable portion and it is hereby declared the intention of the parties hereto that this agreement would have been executed without reference to any portion which may, for any reason, be hereafter declared or held invalid or unenforceable.

34. ACKNOWLEDGEMENT – Lessee acknowledges and understands that the Agreement contained herein is and shall become part of every Rental Agreement, oral or written, between the Lessee and Lessor, and will be retained by the Lessor as evidence of such Agreement for all other rentals by the Lessee.

35. PROPER LAW – This agreement shall be governed by and construed in accordance with the laws of the province or territory in which the equipment is delivered. The lessee hereby waives the Limitation of Civil Rights Act of Saskatchewan or similar legislation.

36. ENTIRE AGREEMENT – This instrument constitutes the entire agreement between lessor and lessee; and it shall not be amended, altered or changed except by a written agreement signed by the parties hereto. 37. TIME – Time is of the essence of this lease and each and all of its provisions. 38. INTEREST – On any amounts arising under the terms of the contract shall bear interest of 2% per month (24% per annum) both before and af ter maturity, default and/or judgment. 39. COPY OF DOCUMENTATION – The Lessee hereby agrees and waives any right it may have under any applicable legislation to receive a copy of this Agreement and /or any Financial Interest Statement of Financing Statement. Financing Change Statement

or Verification Statement or Renewal Statement or any documentation of similar effect.

40. ENVIRONMENTAL RECOVERY FEE – The environmental recovery fee indicated above is a recovery by RAS of its expenses and costs for handling, managing and/or disposing of waste materials associated with the rented equipment that contain hazardous substances, such as motor oil, grease and/or hydraulic fluid, as well as related administrative costs. THIS IN NOT A GOVERNMENT MANDATED CHARGE.+

_________________________________________________________________________________ Ron’s Auto Service Ltd


18

Scaffold Guidelines

To All Customers:

AVOID INJURY OR DAMAGE TO EQUIPMENT

Follow the following suggestions to save time when returning equipment and save money on damages. ❖ Never drop equipment from any heights as abuse of equipment will be charged for when

returned. ❖ If equipment is altered in any manner the customer will be charged for labour and materials

to repair the scaffold. ❖ Do not paint, colour code, label and scaffold parts. If you must paint or code our equipment

it must be removed before retuning. If equipment is returned in this way you will be charged for removing paint, debris, scrapping, etc.

❖ Secure all scaffolds from falling and make sure scaffolds are level at all times when using. ❖ Do not attach or permanently secure any items to the scaffolds. Weld marks, screw holes.

And other foreign objects will be charged for removal and repair. ❖ Any rental product returned in a contaminated condition is subject to refusal of the said

product being left at our site. Financial recourse for decontamination of said product will be at the customer’s expense.

❖ To avoid losing equipment secure all loads before leaving our site or jobsite. ❖ Before leaving the jobsite double check that you have all the equipment that you have

rented from us. If you don’t have a list please phone 766-6025 to get a list of outstanding equipment.

❖ NOTE! WE ONLY ACCEPT OUR OWN EQUIPMENT. If equipment has been exchanged

on job sites between customers, ensure that you have all Ron’s Auto Service equipment.

❖ Our office must be immediately notified if any equipment is missing or stolen. This will avoid

continued rental charges.


Scaffold Safety Rules

As recommended by

Ron’s Auto Service Ltd & Equipment Rentals

_______________________________________________________________________________________________ Ron’s Auto Service Ltd


19

Scaffold Safety Rules

Following are some common sense rules designed to promote safety in the use of steel scaffolding. These rules are illustrative and suggestive only, and are intended to deal only with some of the many practices and conditions encountered in the use of scaffolding. The rules do not purport to be all-inclusive or to supplant or replace other additional safety and precautionary measures to cover usual or unusual conditions. They are not intended to conflict with, or supersede, any provincial, local or federal stature or regulation; reference to such specific provisions must be made by the user or competent person. (See rule II)

I. POST THESE SCAFFOLDING SAFETY RULES in a conspicuous place and be sure that all persons who erect, dismantle or use scaffolding are aware of them.

II. FOLLOW ALL OCCUPATIONAL HEALTH & SAFETY, LOCAL AND FEDERAL CODES, ORDINANCES, and REGULATIONS pertaining to scaffold. III. INSPECT ALL EQUIPMENT BEFORE USING – Never use any equipment that is damaged/deteriorated in any way.. IV. KEEP ALL EQUIPMENT IN GOOD REPAIR. Avoid using rusted or corroded equipment – the strength of rusted or corroded equipment is not known. V. INSPECT ERECTED SCAFFOLDS REGULARLY to be sure that they are maintained in safe condition. Occupational Health requires the scaffold to be

inspected every 21 days. Tag the scaffold. VI. SCAFFOLDS MUST BE ERECTED IN ACCORDANCE WITH DESIGN AND/OR MANUFACTURERS’ RECOMMENDATIONS. Scaffolds should be

erected, dismantled and/or altered by a competent person or a person under the direct supervision of the competent person. VII. DO NOT ABUSE OR MISUSE THE SCAFFOLD EQUIPMENT.

VIII. NEVER TAKE CHANCES! IF IN DOUBT REGARDING THE SAFETY OR USE OF THE SCAFFOLD, CONSULT YOUR SUPPLIER. IX. DO NOT WORK ON SCAFFOLDS if your physical condition is such that you feel dizzy or unsteady in any way. A. PROVIDE ADEQUATE SILLS for scaffold posts and/or use base

plates. B. USE ADEQUATE SCREWS instead of blocking to adjust uneven

grade conditions C. PLUMB and LEVEL ALL SCAFFOLDS as the erection proceeds.

Do not force braces to fit – level the scaffold until proper fit is made easily.

D. SECURELY FASTEN ALL SCAFFOLD COMPONENTS. E. DO NOT CLIMB CROSS BRACES. An access (climbing) ladder,

access steps, frame designed to be climbed or equivalent safe access to the scaffold shall be used.

F. SCAFFOLD TIES MUST RESTRAIN COMPRESSION AND TENSION. The anchor for the ties must be secured and maintained every 6.4m (20’) horizontally and every 4.6cm (15’) in vertical height.

G. WHEN SCAFFOLDS ARE TO BE PARTIAL OR FULLY ENCLOSED, specific precautions must be taken to ensure frequency and adequacy of ties attaching the scaffold to the building due to increased load conditions resulting from effects of wind and weather. Occupational Health and Safety states that ties on enclosed scaffolds must be 3m (10’) horizontally and 3m (10’) vertically.

H. FREE STANDING SCAFFOLD TOWERS MUST BE RESTRAINED FROM TIPPING by guying or other means. The scaffold height to base ratio must not exceed three (3) times the narrowest base.

I. ALL PLATFORMS OR STAGES above 3m must be equipped with proper guardrails, midrails and toeboards along all open sides and ends.

J. POWER LINES NEAR SCAFFOLDS are dangerous – use caution and consult the power service company for advice. If in doubt stay at least 7 meters from the line.

K. DO NOT USE ladders or makeshift devices on top of the scaffolds to increase the height.

L. DO NOT OVERLOAD SCAFFOLDS. M. PLANKING

1. Use only lumber that is properly inspected and graded as a scaffold plank.

2. Planking shall have at least 300mm(12”) of overlap and extended a minimum 150mm(6”) beyond the center of support, or be cleated at both ends to prevent slipping off supports.

3. Fabricated scaffold planks and platforms unless cleated or restrained by cleated or restrained by hooks shall extend over their end supports not less than 150mm (6”) nor more than 300mm (12”).

4. Secure planks and platforms to the scaffold. N. FOR ROLLING SCAFFOLD THE FOLLOWING ADDITIONAL

RULES APPLY: 1. DO NOT RIDE ROLLING SCAFFOLDS. 2. SECURE OR REMOVE ALL MATERIAL AND

EQUIPMENT from platform before moving scaffolds. 3. CASTOR BRAKES or blocked wheel shall prevent swivel

and rotating movement when workers are on the scaffold. 4. CASTORS shall be attached to the frame or screwjack by

pins or other suitable means. 5. DO NOT ATTEMPT TO MOVE A ROLLING SCAFFOLD

WITHOUT SUFFICIENT HELP – watch out for holes in the floor and overhead obstructions.

6. DO NOT EXTEND ADJUSTING SCREWS ON ROLLING SCAFFOLDS more than 300mm (12”)

7. USE HORIZONTAL DIAGONAL BRACING near the bottom ant at 6.4M (20’) intervals.

8. DO NOT USE BRACKETS ON ROLLING SCAFFOLDS without consideration of overturning forces.

9. THE WORKING PLATFORM HEIGHT must not exceed three (3) times the smallest base dimension unless it is guyed or otherwise stabilized.

O. For PUTLOGS and TRUSSES the following additional rules apply 1. DO NOT CANTILEVER OR EXTEND

PUTLOG/TRUSSES as side brackets without thorough consideration for loads and horizontal forces.

2. PUTLOG/TRUSSES SHOULD EXTEND at least 150mm (6”) beyond the point of support unless knee braced.

3. PLACE PROPER BRACING BETWEEN PUTLOGS/TRUSSES when span of Putlogs/Trusses is more than 12’.

P. ALL BRACKETS shall be seated correctly with side brackets parallel to the frames and end brackets at 90 degrees to the frame. Brackets shall not be bent or twisted from normal position. Brackets are to be used as work platforms only and NOT used for storage of material or equipment.

Q. ALL SCAFFOLD ACCESSORIES shall be used and installed in accordance with the manufacturer’s recommended procedures. Accessories shall not be altered in the field. Scaffolds, frames and their components, manufactured by different companies shall not be intermixed.


OVERTIME RATES MAY APPLY ON LIFTS DELIVERY & PICKUP EXTRA WITHIN CITY PREMISES ELECTRIC SCISSORS $175 BY THE HOUR RT SCISSORS $225 BY THE HOUR BOOM LIFTS $225 BY THE HOUR

DAY = 8 hrs WEEK = 40 hrs 4 WEEKS = 160 hrs

RATES SUBJECT TO CHANGE WITHOUT NOTICE!

20

AERIAL WORK PLATFORM

Description Hourly Daily Weekly 4 Weeks

SCISSOR LIFTS ELECTRIC BATTERY POWERED - SELF PROPELLED

20ft ELECTRIC SCISSOR NARROW 32" (GNI2032) $185.50 $555.55 $1640.00

26ft ELECTRIC SCISSOR NARROW 32" (GNI2632) $225.00 $655.00 $1885.00

30ft ELECTRIC SCISSOR STD-68" (GNI3268) OR 46" WIDE (GNI3246)

$260.00 $865.00 $2305.00

DUAL FUEL DIESEL SCISSOR LIFTS

30-33ft SCISSOR 4X4 DUAL/FUEL (MEC3072/RT33)

$340.00 $1500.00 $3000.00

40ft SCISSOR 4X4 DUAL/FUEL $490.00 $1430.00 $3440.00

50ft RT SCISSOR 4x4 DIESEL POWERED OR DUAL FUEL

$525.00 $1800.00 $4415.00

ELECTRIC BOOM LIFTS ARTICULATING/KNUCKLE

30ft ART BOOM LIFT DC (GNIZ30/20N) OR (JLGE300)

$405.00 $1200.00 $3250.00

40ft ART BOOM LIFT DC (GNIZ40/20NRJ) $425.00 $1500.00 $3575.00

45ft ART BOOM LIFT DC (GNIZ45/25) $445.00 $1600.00 $4000.00

DIESEL GAS BOOM LIFTS ARTICULATING/KNUCKLE

45ft ART BOOM LIFT RT (GNIZ45/25) $495.00 $1755.00 $4680.00

65ft ART BOOM LIFT RT (GNIZ60/34) $665.00 $2250.00 $6755.00

80ft ART BOOM LIFT RT (GNIZ80/60) $1215.00 $4775.00 $14,035.00

Z135 135ft ART BOOM RT (GNIZ135/70) $4500.00 $11,080.00 $23,340.00

OVERTIME RATES MAY APPLY ON LIFTS DELIVERY & PICKUP EXTRA WITHIN CITY PREMISES ELECTRIC SCISSORS $175 BY THE HOUR RT SCISSORS $225 BY THE HOUR BOOM LIFTS $225 BY THE HOUR



21

AERIAL WORK PLATFORM


BOOM LIFTS STRAIGHT BOOM

45ft STRAIGHT BOOM (GNI S-45) $575.00 $1900.00 $4925.00

65ft STRAIGHT BOOM RT (GNI S-65) $665.00 $2250.00 $6755.00

85ft STRAIGHT BOOM RT (GNI S-85) $1215.00 $4770.00 $14,035.00

125ft STRAIGHT BOOM RT (GNI S-125) $3150.00 $7815.00 $19,500.00

OPTION ATTACHMENT PANEL CRADLE FOR S/2 MODEL

$20.00 $60.00 $80.00

MATERIAL LIFT

GENIE SLC-24 MATERIAL LIFT $115.00 $405.00 $865.00

FREIGHT MAY APPLY DEPENDING ON RENTAL LENGTH OVERTIME HOURS MAY APPLY



22

AIR EQUIPMENT


AIR COMPRESSORS

COMPRESSOR AIR 1-4 CFM 110V 4.5 GAL PRIME I-R 4.6 CFM

$30.00 $125.00 $330.00

COMPRESSOR AIR 5-7 CFM 110V 6 CFM 90 PSI 30 GAL I-R

$35.00 $135.00 $400.00

COMPRESSOR AIR 15 CFM GAS 5hp HONDA 14.6 CFM 125 PSI 8 GAL I-R

$50.00 $200.00 $600.00

COMPRESSOR AIR 70 CFM GAS X-AIR SC70 100 PSI HONDA GAS 300 LBS

$115.00 $445.00 $1,335.00

COMPRESSOR AIR 185 CFM 150 PSI DIESEL 91L FUEL TANK WT 2670 LBS 1211 KG COMPRESSOR AIR 210 CFM 150 PSI DIESEL

$165.00 $170.00

$615.00 $625.00

$1,685.00 $1700.00

COMPRESSOR AIR 375 CFM 100 PSI DIESEL COMPRESSOR AIR 375 CFM 150 PSI DIESEL

$270.00 $305.00

$1030.00 $1260.00

$3035.00 $3690.00

COMPRESSOR AIR 900 CFM 150 PSI DIESEL $780.00 $2,765.00 $8,115.00

COMPRESSOR AIR 900 CFM 350 PSI DIESEL $1,145.00 $4,500.00 $13,240.00


COMPRESSOR AIR 1600 CFM 100 PSI DIESEL $880.00 $3,500.00 $10,200.00



BREAKER AIR 20 LBS CHIPPER $32.00 $125.00 $300.00

BREAKER AIR 30-35 LBS BREAKER (IR95LAI) $35.00 $135.00 $365.00

BREAKER AIR 60 LBS BREAKER (MX60) $35.00 $135.00 $405.00

AIR DRILL 30-40 LBS I-R JRD30 / SULLIVAN MRD40

$60.00 $200.00 $550.00




23

AIR EQUIPMENT


AIR DRILL 60 LBS I-R JH40 / SULLIVAN MRD50 $66.00 $230.00 $665.00

AIR TUGGER

3,000LBS SHORT / LONG DRUM $136.00 $600.00 $1,420.00



10,000LBS SHORT DRUM $325.00 $1,350.00 $4,055.00

AIR TAMPER

POGO STICK I-R / ATP $50.00 $195.00 $445.00

AIR HOSE

1/4" X 50' $7.00 $14.00 $28.00

1/4" X 100' $14.00 $28.00 $56.00

3/8" X 50' $7.00 $19.00 $38.00

3/8" X 100' $14.00 $38.00 $76.00

3/8" X 25' $3.50 $7.00 $14.00

½" X 50' $7.00 $20.00 $40.00

1/2" X 100' $14.00 $40.00 $80.00

3/4" X 25' $7.00 $15.00 $30.00

3/4" X 50' $8.00 $20.00 $40.00

3/4" X 100' $16.00 $40.00 $80.00

1" X 25' $7.00 $25.00 $75.00

1" X 50' $15.00 $48.00 $144.00

1" X 100' $15.00 $60.00 $180.00

2” X 100’ $30.00 $100.00 $250.00

HOSE WHIP CHECK FOR 1/2" TO 1-1/4" HOSE $2.50 $4.50 $9.00

HOSE WHIP CHECK FOR 1 -1/2" TO 3" HOSE $2.50 $5.00 $10.00

AIR BLOWPIPE C/W BALL VALVE & FITTING $10.00 $30.00 $90.00




24

AIR EQUIPMENT


AIR TOOL INLINE LUBRICATOR $5.00 $20.00 $60.00

** CABLES FOR TUGGERS SOLD SEPARATELY

LEGEND Sharpening Charge ** For All Bits, Steels, Points, Chisel, Spades & Cutters ** For Cross Bits ** For H Thread & Rope Thread Bit (per bit)



25

AIR TOOLS


AIR CHISEL $15.00 $60.00 $120.00

AIR POP RIVETER 3/16” $25.00 $75.00 $225.00

RIGHT ANGLE EXT. FOR 3/16” $5.00 $15.00 $45.00

AIR POP RIVETER (1/4" SUNNEX 1819T POP RIVETER PNEUMATIC)

$50.00 $120.00 $360.00

3/8” DR AIR RATCHET $15.00 $60.00 $120.00

3/8” DR AIR IMPACT $15.00 $60.00 $120.00

1/2” DR AIR IMPACT $20.00 $80.00 $240.00

3/4” DR AIR IMPACT $30.00 $120.00 $350.00

1” DR AIR IMPACT $75.00 $300.00 $860.00

1/4” AIR DRILL $15.00 $60.00 $120.00

3/8” AIR DRILL $20.00 $70.00 $145.00

1/2” AIR DRILL $25.00 $80.00 $200.00

3/8" ANGLE AIR DRILL $20.00 $80.00 $160.00

BAREMA 120 POINJAR ROCK DRILL $125.00 $625.00 $1,875.00

WHEN USED FOR DRILLING 2” $150.00 $750.00 $2,250.00

HOLE OR BIGGER

PORTABLE AIR TANK $10.00 $40.00 $75.00

GRINDER 7" R/ANGLE 5/8 ARBOR $25.00 $100.00 $300.00

FLOOR SCRABBLER AIR 5 HEAD (MACDONALD 45)

$175.00 $550.00 $1,650.00

PNEUMATIC AIR POST DRIVER

$80.00 $320.00 $960.00

LEGEND

Sharpening Charge UNDER 2” 2” & OVER

* For All Bits, Steels, Points, Chisel, Spades & Cutters $15.00

** or Cross Bits $25.00 $35.00

*** For



26

AUGERS


SOIL

EARTH AUGER (HAND) $10.00 $30.00 $72.00

EARTH AUGER - GAS $75.00 $300.00 $600.00

C/W 1 AUGER 6”,8”,10” OR 12” FLUTE

EXTRA AUGER FLUTES $10.00 $40.00 $120.00

1 FT. EXTENSION $1.00 $4.00 $12.00

2 FT. EXTENSION $2.00 $8.00 $24.00

4 FT. EXTENSION $4.00 $16.00 $48.00

36” FLUTED AUGER EXTENSION $15.00 $60.00 $180.00

ICE

POWER HEAD ICE AUGER (HUSH226AI25) $35.00 $145.00 $450.00

CARRY CASE 24"L x 19"W x 13"D (FOR POWER HEAD) EXTRA COST

$10.00 $30.00 $60.00

HUSQ ICE AUGER C/W 4”, 5”, 6”,8”,OR 10” FLUTE $40.00 $160.00 $480.00

EXTRA AUGER FLUTES: 4”, 5”, 6”, 8” OR 10” $5.00 $15.00 $30.00

AUGER EXTENSIONS 12” $5.00 $12.50 $25.00

AUGER EXTENSIONS 20” $5.00 $15.00 $30.00

WEEKEND SPECIAL

Friday Evening to Monday 9:00am

ICE AUGER – GAS C/W 6”, 8” OR 10” FLUTE $60.00

12” EXTENSIONS $4.00

20” EXTENSIONS $5.00

DUTCH STONY SOIL SAMPLER (HAND) 2-1/2” DIA $15.00 $60.00 $180.00

SAMPLER EXTENSION $5.00 $15.00 $45.00

*ALSO SEE LOADERS SKID-STEER ATTACHEMENTS*



27

AUTO TOOLS AND SHOP EQUIPMENT


BALL JOINT PRESS $25.00 $100.00

BALL JOINT SOCKET (CHRYSLER) $10.00

BATTERY CHARGER $20.00 $40.00 $100.00

BATTERY CHARGER -TICKLER 10AMP $6.00 $18.00 $54.00

BOLT CUTTER 24” $10.00 $40.00 $120.00

BOLT CUTTER 36” $15.00 $50.00 $150.00

BOLT CUTTER 48” $20.00 $80.00 $240.00

BOOSTER CABLES $5.00 $20.00 $50.00

CABLE CRIMPER (SWAGER) FOR WIRE ROPE SIZE: 1/8”, 3/16” OR ¼”

$20.00 $60.00 $180.00

CLUTCH ALIGN TOOL $10.00 $40.00 $120.00

COMPRESSION TESTER $25.00 $40.00 $120.00

CYLINDER DEGLAZER $10.00 $40.00 $120.00

CYLINDER HONE $40.00 $120.00

DRILL PRESS $35.00 $140.00 $420.00

ENGINE CRANE $50.00 $200.00 $420.00

ENGINE STAND $15.00 $48.00 $144.00

FLARING TOOL $10.00 $40.00 $120.00

HELI COIL KIT (COILS ARE AN EXTRA CHARGE) $25.00

MASTER HEAT GUN - (2000 WATTS) 1000f $20.00 $80.00

OIL PRESS GAUGE $20.00

PISTON RING COMPRESSOR $12.00 $48.00



28

AUTO TOOLS AND SHOP EQUIPMENT


PULLERS $25.00 $50.00

PULLER - AXLE $25.00 $80.00

RIDGE REAMER $20.00 $80.00

RIVETER - AIR OPERATED POP 3/16 $25.00 $75.00 $225.00

RIVETER - RIGHT ANGLE EXTENSION FOR 3/16 $5.00 $15.00 $45.00

RIVETER - AIR 1/4 $50.00 $120.00 $360.00

RIVETER - BIG DADDY POP $25.00 $75.00 $150.00

RIVETER - HAND OPERATED POP

$5.00 $20.00 $60.00

SAFETY STANDS $5.00 $20.00

SLIDE HAMMER $20.00 $80.00

OTC 7948 SLIDE HAMMER KIT $40.00 $80.00 $120.00

SNOWMOBILE TRACK CHIP TOOL $20.00 $80.00

SOCKET SET 1/2" DR DEEP (1/2" - 1") $15.00 $60.00 $180.00

SOCKET SET 1/2" DR SHALLOW (7/16"- 1 1/4") $20.00 $80.00 $240.00

SOCKETS - AXLE NUT $5.00 $20.00

SOCKETS - INDIVIDUAL $5.00 $20.00

SUSPENSION SPRING COMPRESSOR $20.00 $60.00 $180.00

TIMING LIGHT- 12 VOLT DIGITAL $20.00 $80.00 $240.00

TIMING LIGHT- 12 VOLT STD $10.00 $40.00 $120.00

TORQUE WRENCHES $20.00

1/2” DRIVE 0-150 FEET POUND $20.00 $45.00 $90.00

1/2" DRIVE PRECISION 50-250 FEET POUND

$25.00 $60.00 $100.00

1/4" DRIVE 40-200 INCH POUND $20.00 $45.00 $90.00

3/8” DRIVE 0-100 FEET POUND $20.00 $45.00 $90.00

3/8” DRIVE 0-200 INCH POUND $20.00 $45.00 $90.00

3/4” DRIVE 100-600FT LBS PROTEC $50.00 $100.00 $225.00

VALVE SPRING COMPRESSOR $10.00 $40.00 $120.00

PORTABLE HYDRAULIC PIPE EXPANDER 1 ½”, 1 ¾”, 2 ¼”, 2 ½”, 3”

$40.00 $160.00 $480.00

PORTABLE HYDRAULIC PIPE EXPANDER 3 ½”, 4”, 5”

$50.00 $200.00 $600.00



29

CARPENTRY TOOLS Description Hourly Daily Weekly 4 Weeks

BLACK & DECKER 3 1/4” PLANER $20.00 $80.00 $240.00

4” JOINTER $12.00 $35.00 $100.00

1/4” ROUTER $15.00 $45.00 $110.00

C/W 1 STANDARD BIT

MAKITA NIBBLER MAKITA SHEAR

$25.00 $25.00

$80.00 $80.00

$240.00 $240.00

CHAINS & BOOMERS Description Hourly Daily Weekly 4 Weeks

3/8" x 20ft TRANSPORT CHAIN $8.00 $24.00 $48.00

BOOMERS $8.00 $24.00 $48.00

HERC STRAP 2” x 30ft $8.00 $24.00 $48.00

COME ALONGS / CHAIN FALLS / TIRFORS **ALSO SEE PG61 Description Hourly Daily Weekly 4 Weeks

COME ALONG W/ 1/4 CABLE 1000/2000 lbs $10.00 $30.00 $80.00


COME ALONG 3/4 TON CHAIN TYPE 5ft FALL $35.00 $50.00 $95.00

LEVER HOIST

COME ALONG 1 TON CHAIN TYPE 5-10ft FALL $45.00 $65.00 $155.00

COME ALONG 1 1/2 TON CHAIN TYPE 5-10ft FALL LEVER HOIST

$45.00 $65.00 $155.00

COME ALONG 2 TON CHAIN TYPE 5-10ft $50.00 $100.00 $205.00

LEVER HOIST

TIRFOR 1500LBS LIFT $35.00 $100.00 $250.00



30

COME ALONGS / CHAIN FALLS / TIRFORS **ALSO SEE PG61

TIRFOR 3000LBS LIFT (T13) $40.00 $120.00 $30.00

TIRFOR 6000LBS LIFT (T35) $45.00 $135.00 $400.00

FENCE PULLER

$5.00 $20.00 $60.00

SPREADER BAR ADJUSTABLE 5TON SPREAD 60-120” 475LBS

$75.00

$400.00

$1200.00

SPREADER BAR ADJUSTABLE 7TON SPREAD 72-144” 755LBS

$75.00 $400.00 $1200.00

*CABLE FOR TIFORS SOLD SEPERATELY*



31

COMPACTION Description Hourly Daily Weekly 4 Weeks

TAMPER RAMMERS

TAMPER RAMMER (JUMPING JACK TAMPER) 2 CYCLE, 4 CYCLE, OIL INJECTED. APPROX 83 KG 185 LBS, MIKISA, I-R, BOMAG, DYNAPAC

$70.00 $280.00 $840.00

TAMPER RAMMER DIESEL MIKASA (MT-76D) $90.00 $400.00 $1080.00

8" TAMPING FOOT $9.85 $40.00 $118.00

PLATE TAMPERS

PLATE TAMPER GAS 200 LBS 20"x 22" 90 KG 196 LBS, MIKASA MVC-90L, I-R, BOMAG

$60.00 $240.00 $720.00

PLATE TAMPER GAS 463 LBS 20”x 28” MV4206GH $100.00 $500.00 $1,400.00

PLATE TAMPER DIESEL 750 LBS 24" x 34" MIKASA MVH304 / MVH306 CERT FORCE 8820 LBS LG 300 DYNAPAC

$125.00 $600.00 $1,500.00

PLATE TAMPER DIESEL 1000 LBS 28" x 35" MIKASA MVH402 / DYNAPAC LH500 CERT FORCE 12400LBS LG 4000 DYNAPAC. LG 400

$185.00 $730.00 $2,200.00

PLATE TAMPER DIESEL 1200 LBS 28" x 35" MIKASA MVH502 CERT FORCE 14000LBS LG 5040 DYNAPAC

$200.00 $800.00 $2,400.00

PLATE TAMPER DIESEL 2000 LBS 24" x 36" DYNAPAC LH700

$300.00 $1,200.00 $3,600.00

VIBRATOR WALK BEHIND DOUBLE ROLLER GAS MIKASA MR-8G 850 KG 1870 LBS 27"

$125.00 $460.00 $1,380.00

VIBRATOR WALK BEHIND DOUBLE ROLLER DIESEL BOMAG BW755LE 30" OR MIKASA MDR9-DYE 28"

$180.00 $720.00 $2,160.00

VIBRATOR WALK BEHIND DOUBLE ROLLER DIESEL BOMAG BW90SLE 36"

$235.00 $920.00 $2,705.00



32

COMPACTION Description Hourly Daily Weekly 4 Weeks

I/R 441A2 POGO STICK TAMPER AIR $50.00 $195.00 $445.00 47LBS DIAMETER 5-3/4” APT M131 37LBS DIAMETER 6”

54" SMOOTH RIDE ON DIESEL 11000 LBS SD45 $430.00 $1,700.00 $5,050.00

54" PAD FOOT RIDE ON 11000 LBS DIESEL SD45 $475.00 $1,850.00 $5,350.00

SMALL CEMENT TROWEL $3.00 $12.00 $36.00

MANUAL HAND TAMPER $5.00 $20.00 $40.00

CONCRETE EQUIPMENT Description Hourly Daily Weekly 4 Weeks

BELLE ELECTRIC PORTABLE CEMENT MIXER MODEL (WC-SB4E) 4.3 CU FT

$30.00 $120.00 $270.00

CEMENT MIXER 9 CU. FT., 985LBS CROWN C9C 9HP ROBIN 1+ BAG CAPACITY (GAS)

$100.00 $400.00 $1,000.00

MORTER MIXER 8 CU. FT. STEEL DRUM CROWN (GAS)

$95.00 $285.00 $855.00

MORTER MIXER 8 CU. FT. STEEL DRUM (ELECTRIC) 115-240V

$95.00 $285.00 $855.00

CEMENT MIXER 12 CU. FT. (STONE) 1 1/2 – 2 BAG 900lbs

$150.00 $500.00 $1500.00

MIKASA CONCRETE VIBRATOR-2 H.P. $50.00 $150.00 $450.00

C/W 3 METER SHAFT

CHOICE FO HEADS: 1 1/4” X 16” OR 2” X 13”

MIKASA CONCRETE VIBRATOR-3H.P. $75.00 $225.00 $575.00

C/W 3 METER SHAFT

CHOICE OF HEADS: 1 1/4” X 16” OR 2” X 13”

3 METER EXTENSION FOR CONCRETE VIBRATOR

$8.00 $16.00 $32.00

WHITEMAN 36” POWER TROWEL $70.00 $280.00 $625.00

MODEL: J-4-4R

C/W COMBINATION BLADES OR

FLOAT & FINISH BLADES



33


*CLEANING CHARGE OF $120.00/HR IF REQUIRED

BARTELL 46" POWER TROWEL C/W COMBINATION BLADES OR

$80.00

$320.00

$714.00

FLOAT & FINISH BLADES

*CLEANING CHARGE OF $120.00/HR IF REQUIRED

BULL FLOAT 48” C/W HANDLE

$20.00

$50.00

$150.00

EXTRA 6" HANDLE EXTENDSION $2.50 $10.00 $30.00

RUBY TILE CUTTER

$20.00 $80.00 $240.00

WHEEL BARROW $10.00 $40.00 $120.00

WHEEL BARROW GAS POWERED (BELLE) $150.00 $600.00 $1,800.00

SMALL EDGER $3.00 $12.00 $36.00

MAGNESIUM FLOAT $5.00 $20.00 $60.00

SMALL CEMENT TROWEL SQUARE, POINTED

$3.00 $12.00 $36.00

TILE SAW BLADE CHARGE: NEW BLADE 0.275/THOUSAND/INCH USEABLE 0.60/ 0.001 THOUSAND/INCH NEW MEASURES .580"

$65.00 $260.00 $780.00

DEAD MEASURES .305"

MINIMUM BLADE CHARGE $20.00

USE FLK772494 10" BLADE



34


POWER SCREED (WACKER / CROWN) c/w 8' SCREED c/w 12' SCREED

$50.00 $60.00

$200.00 $240.00

$600.00 $720.00

STOW PR200CVS520L CORING MACHINE C/W 3 - POWER CHORDS 1 - VACUUM SEAL *RECOMMEND MIN 5000W GENERATOR

$75.00 $300.00 $1,000.00

HILTI DD130 HAND HELD CORE DRILL 1"- 6" CAPACITY

$100.00

$400.00 $1,200.00

HILTI DD150 HAND HELD CORE DRILL $150.00 $600.00 $1,800.00

HILTI DD130 VACUUM PUMP $20.00 $80.00 $120.00

HILTI DD130 HAND HELD CORE DRILL STAND $20.00 $80.00 $120.00

HILTI DD150 HAND HELD CORE DRILL STAND $20.00 $80.00 $120.00

CORE DRILL EXTENDSIONS & ADAPTORS $5.00 $20.00 $60.00

PORTABLE PUMP WATER BOTTLE $10.00 $40.00 $80.00

HILTI MD2000 (00252401) EPOXY GUN H.I.T. SYSEM MANUAL DISPENSER

$20.00 $60.00 $180.00

MD1000 H.I.T. ICE DISPENSER KIT EPOXY GUN $20.00 $60.00 $180.00

* EPOXY SOLD SEPARATE: HILTI H.I.T. - HIL00371957 HY150 OR HILTI H.I.T. ICE - HIL00371292 HY500

FLOOR SCRABBLER AIR 5 HEAD (MACDONALD 45)

$175.00 $550.00 $1,650.00

STIFF BACK SPIDER $1.50

CAM LOCK BRACKET $1.50

SURFACE PLANER SCARIFIER 5HP HONDA GAS GENERAL SP8 (HEAD WEAR EXTRA)

$100.00 $400.00 $600.00



35


GENERAL SP8-6200 FAIL KIT HEAD

$150.00 $450.00 $1200.00

CONSTRUCTION EQUIPMENT Description Hourly Daily Weekly 4 Weeks

TARPS

24’ X 12’ X 1/2” N/A $20.00 $40.00

PARACHUTE 100ft $100.00 $200.00 $400.00

For every Rip or Nail Hole $5.00 to $10.00 Charge

WHEEL BARROW $10.00 $40.00 $120.00

WHEEL BARROW GAS POWERED $150.00 $600.00 $1,800.00

CONVEYOR EQUIPMENT Description Hourly Daily Weekly 4 Weeks

MINI CONVEYOR CLEATED BELT SECTION

10’ X 15” $115.00 $350.00 $1050.00

MINI CONVEYOR

CLEATED BELT SECTION



36

CONVEYOR EQUIPMENT 15’ X 15” $166.00 500.00 $1495.00

CONTROL BOX 120V $31.00 $95.00 $280.00

SLAVE BOX $30.00 $87.00 $260.00

CABLE INTERCONNECTION 15’ 120V

$5.00

$10.00

$30.00

CABLE INTERCONNECTION 20’ 120V

$7.00

$25.00

$65.00

TERMINATOR PLUG

$5.00

$20.00

$40.00

SIDE EXTENSION 5FT/1.5M

$7.00

$20.00

$40.00 SIDE EXTENSION 6FT/2M

$8.00

$25.00

$60.00 SIDE EXTENSION 10FT/3M

$10.00

$30.00

$70.00 WHEEL KIT

$7.00

$25.00

$45.00

15” CLAMP KIT $20.00 $55.00 $175.00

15” HOPPER HAND LOAD

$25.00

$70.00

$210.00

15” HOPPER KIT

$55.00

$160.00

$475.00

LARGE LEG KIT

$44.00

$135.00

$400.00

MEDIUM LEG KIT

$14.00

$45.00

$126.00

SHORT LEG KIT

$12.00

$35.00

$100.00

15” CANTILEVER KIT

$8.00

$25.00

$75.00

LEGEND



** For Cross Bits $25.00 $35.00

*** For Button Bit $40.00 %50.00



37

DIAMOND PRODUCTS Description Hourly Daily Weekly 4 Weeks

BLADE RENTAL

4 1/2" DRY CUTTING BLADE

.30/THOU $10.00MIN.

9” DOUBLE BLADE FOR CUT ‘N’ BREAK

$3.75/THOU $40.00 MIN.

10" CUTTING BLADE

$3.00/THOU $30.00 MIN.

9” CUT ‘N’ BREAK BLADE $60.00/THOU $60.00 MIN

12" CUTTING BLADE

$3.75/THOU $40.00 MIN.

14" CUTTING BLADE

$3.75/THOU $40.00 MIN.

16" CUTTING BLADE $7.00/THOU $50.00 MIN.

18" CUTTING BLADE

$8.00/THOU $50.00 MIN.

20" CUTTING BLADE

$8.00/THOU $50.00 MIN.

5" DOUBLE ROW DIAMOND CUP

$3.40/THOU $40.00 MIN.

LEGEND



** For Cross Bits $25.00 $35.00

*** For Button Bit $40.00 %50.00



38

DIAMOND PRODUCTS Description Hourly Daily Weekly 4 Weeks

CORE BIT RENTAL 1/4" - 1 1/2" BP1500 PREMIUM BIT $10.00 $25.00 $75.00

(MIN. WEAR CHARGE $25.00 OR $1.50/THOU)

2" BP2000 PREMIUM BIT $10.00 $25.00 $75.00

(MIN WEAR CHARGE $25.00 OR $1.75/THOU) 2 1/2" BP2500 PREMIUM BIT $10.00 $25.00 $75.00


3" BP3000 PREMIUM BIT $20.00 $80.00 $240.00

(MIN. WEAR CHARGE $25.00 OR $2.25/THOU) 3 1/2" BP3500 PREMIUM BIT $20.00 $80.00 $240.00


4" BP4000 PREMIUM BIT $20.00 $80.00 $240.00

(MIN. WEAR CHARGE $25.00 OR $3.00/THOU) 4.25" BP5000 PREMIUM BIT $20.00 $80.00 $240.00


6" CORE BIT (MIN. WEAR CHARGE $25.00 OR $5.35/THOU)

$20.00 $80.00 $240.00

8" CORE BIT (MIN. WEAR CHARGE $25.00 OR $6.00/THOU)

$20.00 $80.00 $240.00

10" CORE BIT (MIN. WEAR CHARGE $25.00 OR $8.93/THOU

$20.00 $80.00 $240.00

12" PREMIUM BIT (MIN. WEAR CHARGE $30.00 OR $9.00/ THOU

$20.00 $80.00 $240.00

10” DIAMOND ROTARY GRINDING CUP 20 SEGMENTS USED WITH RG2112 (MIN WEAR CHARGE $50.00 OR $5.00/THOU)

$20.00 $80.00 $240.00

CORESPLITTER PLUS BLADE

$75.00 $225.00 $650.00

LEGEND



** For Cross Bits $25.00 $35.00

*** For Button Bit $40.00 %50.00



39

DRILLS AND GRINDERS Description Hourly Daily Weekly 4 Weeks

ECHO 2 CYCLE 1/2" REVERSE DRILL $35.00 $75.00 $250.00

1/4” AIR OPERATED DRILL $12.50 $50.00 $100.00

1/2” AIR OPERATED DRILL $15.00 $60.00 $120.00

MAKITA DRILL-1/2” ELECTRIC (MAK6013BR) $15.00 $60.00 $150.00

WITH ANGLE HEAD $20.00 $80.00 $240.00

CORDLESS SCREWDRIVER L. $5.00 $15.00 $45.00

3/8” MAKITA CORDLESS DRILL REV. $10.00 $30.00 $90.00

C/W SCREW BITS

3/8” REVERSIBLE DRILL $10.00 $30.00 $90.00

24V CORDLESS DRILL METABO 00190 $50.00 $200.00 $600.00

36V HILTI TE6-A CORDLESS KIT $85.00 $255.00 $765.00

DRYWALL SCREW GUN $10.00 $32.00 $95.00

C/W 1 SCREWDRIVER BIT

4” ANGLE GRINDER (MAKITA) $12.00 $48.00 $144.00

4" 1/4 METABO $15.00 $50.00 $150.00

7” ANGLE GRINDER (B & D) $20.00 $80.00 $240.00

MAKITA ELECTRIC NIBBLER 16ga JN1601 MAKITA ELECTRIC SHEAR

$25.00 $25.00

$80.00 $80.00

$240.00 $240.00

ROTARY HAMMER 1" PISTOL GRIP METABO $40.00 $140.00 $420.00

C/W 1 DRILL BIT 5/32-3/4”

COMPACT MODEL BHE20

ROTARY HAMMER 1 1/2” (TE25) $50.00 $200.00 $600.00

C/W PUNCH &

CHISEL OR 1 DRILL BIT (MULTI FIT)

LEGEND



** For Cross Bits $25.00 $35.00

*** For Button Bit $40.00 %50.00



40


ROTARY HAMMER 2” (TE76 - TE80) $60.00 $240.00 $720.00

C/W 1 PUNCH & CHISEL OR 1 DRILL BIT

HILTI DUST REMOVAL SYSTEM FITS: TE – X SDSMAX (TE 70, 76, 80)

$50.00 $200.00 $300.00

HILTI TE905 ELECTRIC BREAKER C/W PUNCH OR CHISEL

$60.00 $240.00 $720.00

HILTI TE1500 ELECTRIC BREAKER C/W PUNCH OR CHISEL

$75.00 $300.00 $900.00

ELECTRIC BREAKER 60 LBS (BOSCH BRUTE / HILTI TE3000) C/W PUNCH & CHISEL EXTRA DRILL BIT SDS PLUS

$80.00

$3.00

$320.00

$12.00

$960.00

$25.00

EXTRA DRILL BIT SDS MAX UP TO 1" $6.00 $24.00 $72.00

EXTRA DRILL BIT SDS MAX (MULTI FIT) 1" + $20.00 $60.00 $180.00

12” DRILL BIT EXTENSIONS $6.00 $24.00 $72.00

WOOD AUGER BIT

$6.00 $24.00 $50.00

CLAY SPADE $10.00 $40.00 $120.00

AIR ROCK DRILL 30-40 LBS CLASS (CIRJRD30 / SULLAIRMRD40)

$60.00 $200.00 $550.00

AIR DRILL 60LBS I-RJ440 / SULLAIR MRD50 $66.00 $230.00 $665.00

2” CARBIDE TIP CORING BIT $20.00 $80.00 $240.00



CHISEL * $5.00 $10.00 $30.00

POINT *

$5.00 $10.00 $30.00

Chipped or Broken Teeth $20.00/ea

CENTER BIT FOR CARBIDE BIT $5.00 $10.00 $15.00

DRILL PRESS

$35.00 $140.00 $420.00

1/2” ELECTRIC IMPACT $15.00 $60.00 $180.00

3/4" ELECTRIC IMPACT $25.00 $100.00 $221.00

1" ELECTRIC IMPACT $66.00 $198.00 $594.00

LEGEND



** For Cross Bits $25.00 $35.00

*** For Button Bit $40.00 %50.00



41


GAS POWERED REVERSIBLE DRILL 1/2"

$30.00 $90.00 $270.00

BAREMA 120 POINJAR ROCK DRILL $140.00 $700.00 $2000.00

WHEN USED FOR DRILLING 2” HOLE OR BIGGER $200.00 $1000.00 $2500.00

(EXTRA FOR STEEL & BITS)

TAPER DRILL STEEL / H - THREAD

12” $3.00 $12.00 $36.00

18” $4.00 $16.00 $48.00

24” 36”

$5.00 $6.00

$20.00 $24.00

$60.00 $72.00

48” $6.00 $24.00 $72.00

96” $12.00 $48.00 $141.00

144 $150.00

CHISEL DRILL STEEL *

12” $9.00 $28.00 $85.00

16” $10.00 $30.00 $90.00

24” $10.00 $30.00 $90.00

48” $8.00 $32.00 $96.00

72” $12.00 $36.00 $108.00

96”

$18.00 $54.00 $162.00

ROPE STEEL

18” X 1” ROPE STEEL R 25 $5.00 $20.00 $60.00

2’ X 1” ROPE STEEL R25 $8.00 $32.00 $96.00

48” X 1” ROPE STEEL R 25 $10.00 $40.00 $120.00

6’ X 1” ROPE STEEL R 25 $12.00 $40.00 $125.00

8’ X 1” ROPE STEEL R 25 $14.00 $42.00 $126.00

10’ X 1” ROPE STEEL R 25 $16.00 $48.00 $144.00

CHISEL BREAKER $5.00 $10.00 $30.00

POINT BREAKER $5.00 $10.00 $30.00

GROUND ROD DRIVER $5.00 $10.00 $30.00

CROSS BITS **

1-1/4” TAPER $3.00 $10.00 $30.00

1-3/8” TAPER $3.00 $10.00 $30.00

1-1/2” TAPER $4.00 $12.00 $30.00

2” ROPE THREAD BIT *** $15.00 $50.00 $150.00

LEGEND



** For Cross Bits $25.00 $35.00

*** For Button Bit $40.00 %50.00



42


MAGNETIC BASE DRILL 1 1/2” CAPACITY HOUGEN (HMD904) C/W 1/2" DRILL CHUCK

$100.00 $300.00 $900.00

HOUGEN HMD914 2 1/16” CAPACITY $110.00 $330.00 $1000.00 PILOTS $20.00 1" OR 2" DEEP BITS ANNULAR CUTTER HOUGEN 3-12” PIPE ADAPTER STAND $25.00 $75.00 $150.00

ADAPTER SDS MAX TO SDS PLUS (MET23371) $10.00 $25.00 $60.00

STOW PR200CVS520L $75.00 $300.00 $1,000.00

CORING MACHINE

C/W 3 - POWER CORD

1- VACUUM SEAL

*RECOMMEND MIN 5000W GENERATOR

HILTI DD200 CORE RING 1-10” CAPACITY (DRILL & STAND)

$150.00 $600.00 $1800.00

CORE DRILL MOTOR SPACER FOR LARGER THAN 10” BITS – DD – HD30

$45.00 $150.00 $400.00

HILTI HAND HELD CORE DRILL (DD150) 1" - 6" CAPACITY

$100.00 $150.00

$400.00 $600.00

$1,200.00 $1,800.00

HILTI (DD130) VACUUM PUMP (DD150)

$20.00 $20.00

$80.00 $80.00

$120.00 $120.00

HILTI (DD130) DRILL STAND (DD150)

$20.00 $20.00

$80.00 $80.00

$120.00 $120.00

PORTABLE WATER PUMP BOTTLE FOR CORE DRILLS

$10.00 $40.00 $80.00

CORE BIT ADAPTORS & EXTENSIONS $5.00 $20.00 $60.00

½” KWIK LOC CLAMP HOLD DOWN $5.00 $10.00 $25.00 5/8” KWIK LOC CLAMP $5.00 $10.00 $25.00

LEGEND



** For Cross Bits $25.00 $35.00

*** For Button Bit $40.00 %50.00



43


DISPENSERS / CAULKING GUNS

HILTI MD-1000 HILTI ICE $20.00 $60.00 $180.00

HILTI MD-2000 HILTI HIT $20.00 $60.00 $180.00

MAGNETIC LOCATOR (DETECTOR) 101 MANGNA TRACK / CST C/W CASE & MANUAL

$35.00 $90.00 $180.00

HILTI DDEC-1 CORE DRILL $100.00 $400.00 $1200.00

DRILL STEEL & BITS Description Hourly Daily Weekly 4 Weeks

TAPER DRILL STEEL

12” $3.00 $12.00 $36.00

18” $4.00 $16.00 $48.00

24” $5.00 $20.00 $60.00

48” $6.00 $24.00 $72.00

96” $12.00 $48.00 $141.00

DRILL STEEL ROPE THREAD R25

12” $3.00 $12.00 $36.00

16” $4.00 $16.00 $48.00

24” $5.00 $20.00 $60.00

48”

$6.00 $24.00 $72.00

DRILL STEEL H THREAD

12” $3.00 $12.00 $36.00

16” $4.00 $16.00 $48.00

24” $5.00 $20.00 $60.00

48” $6.00 $24.00 $72.00

72” $15.00 $48.00 $144.00

96” $18.00 $54.00 $162.00

120” $20.00 $80.00 $240.00

CHISEL DRILL STEEL *

12” $9.00 $28.00 $85.00

16” $10.00 $30.00 $90.00

LEGEND



** For Cross Bits $25.00 $35.00

*** For Button Bit $40.00 %50.00



44


24” $10.00 $30.00 $90.00

48” $12.00 $36.00 $108.00

96”

$18.00 $54.00 $162.00

CROSS BITS **

1-1/4” TAPER $3.00 $10.00 $30.00

1-3/8” TAPER $3.00 $10.00 $30.00

1-1/2” TAPER $4.00 $12.00 $30.00

2” ROPE THREAD BIT $15.00 $50.00 $150.00

1-1/4” H THREAD $3.00 $10.00 $30.00

1-3/8” H THREAD $3.00 $10.00 $30.00

1-1/2” H THREAD $4.00 $12.00 $30.00

2” H THREAD $15.00 $50.00 $150.00

CLAY SPADE

$5.00 $20.00 $65.00

ASPHALT CUTTER $5.00 $20.00 $65.00

WEDGE & FEATHER 12” $5.00 $20.00 $65.00

POINT BREAKER $5.00 $20.00 $65.00

CHISEL BREAKER $5.00 $20.00 $65.00

AIR BLOW PIPE $10.00 $30.00 $90.00

AIR TOOL OILER Lubricator $5.00 $20.00 $60.00

AIR HOSE

1/4” X 50’ $7.00 $14.00 $28.00

3/8” X 50’ $7.00 $14.00 $28.00

3/8” X 25’ $3.50 $7.00 $14.00

½” X 50’ $18.00 $72.00

3/4” X 25’ $5.00 $10.00

3/4” X 50’ $5.00 $20.00

3/4” X 100’ $10.00 $40.00

LEGEND



** For Cross Bits $25.00 $35.00

*** For Button Bit $40.00 %50.00



45


1” X 25’ $7.00 $25.00 $75.00

1” X 50’ $15.00 $48.00 $144.00

1” X 100’ $15.00 $60.00 $180.00

SDS FLOOR SCRAPER HILTI (CUSTOMER MUST BUY BLADE)

$20.00 $80.00 $240.00

ADAPTER SDS MAX TO SDS PLUS $5.00 $20.00 $60.00



46

ELECTRICAL Description Hourly Daily Weekly 4 Weeks

EXTENSION CORDS

50 FT. LIGHT DUTY 110 VOLT $5.00 $15.00 $30.00

100FT LIGHT DUTY 110 VOLT $10.00 $30.00 $60.00

50 FT HEAVY DUTY 110 VOLT $7.00 $21.00 $42.00



FULL POWER CORD 30A $15.00 $50.00 $150.00

4X4 RECEPTACLE

SPLITTER CORD 120V-30A. $5.00 $15.00 $45.00

1/2” CONDUIT BENDER

$10.00 $20.00 $60.00

3/4” CONDUIT BENDER $10.00 $20.00 $60.00



47

EXCAVATORS Description Hourly Daily Weekly 4 Weeks

K008 2000lbs DIGS 6FT 12L FUEL CAP (KUBOTA) $260.00 $1,000.00 $3,000.00

KX41 3600lbs DIGS 7' 8" 21L FUEL CAP (KUBOTA)

$275.00 $1,130.00 $3,200.00

U15 3530lbs DIGS 7’ 7” 18L FUEL CAP (KUBOTA)

$275.00 $1,130.00 $3,200.00


$275.00 $1,130.00 $3,200.00


$365.00 $1,600.00 $4,000.00

KX71 6300lbs DIGS 10ft 45L FUEL CAP (KUBOTA)

$365.00 $1,600.00 $4,000.00

KX91 7110lbs DIGS 10’ 5” 50L FUEL CAP (KUBOTA)

$375.00 $1,600.00 $4,000.00

U35 8025lbs 11ft DIG FUEL CAP 45L (KUBOTA) E35

$375.00 $1,600.00 $4,000.00

U55 12,720lbs DIGS11’ 10” 68L FUEL CAP (KUBOTA)

$500.00 $2,000.00 $6,000.00

KX057-4 13,010lbs DIGS 12’ 8” 75L FUEL CAP (KUBOTA)

$500.00 $2,000.00 $6,000.00

KX080 9 TON DIGS 15’ 115L FUEL CAP (KUBOTA) 17,800.LBS

$600.00 $2400.00 $7200.00

DX140 14.3 TON DIGS 19’FT7” 235L FUEL CAP 14,000KG C/W BLADE

$900.00 $3,055.00 $10,555.00

DX180 20 TON DIGS 20’FT 18,300KG 40,260LBS C/W BLADE

$975.00 $3,300.00 $12,000.00

JOHN DEERE 200LC MAX DIG 19’7” 44,750LBS 20,298KG 32” SEMI GROUSER SHOES

$1,000.00 $3,500.00 $12,500.00

BREAKERS

FOR K008 $300.00 $1,000.00 $3,000.00



48

EXCAVATORS Description Hourly Daily Weekly 4 Weeks

FOR KX91 & U35 $305.00 $1,225.00 $3,700.00

FOR KX080 $350.00 $1,600.00 $4,600.00

EXTRA BUCKETS

BUCKET 8” (K008) $20.00 $80.00 $240.00

BUCKET 10” (K008) $20.00 $80.00 $240.00

BUCKET 12” (K008) $20.00 $80.00 $240.00

BUCKET (U35) E35 18-24” BUCKET (U35) E35 12”

$30.00 $20.00

$120.00 $80.00

$360.00 $240.00

BUCKET (K080) $30.00 $120.00 $360.00

BUCKET (K080) $30.00 $120.00 $360.00

BUCKET (K080) $30.00 $120.00 $360.00

BUCKET (K080) $30.00 $120.00 $360.00

BUCKET 36” DX180 HD $18.00 $72.00 $288.00

BUCKET 36” WBM JOHN DEERE 200 $55.00 $225.00 $665.00

BUCKET 60” CLEANUP JOHN DEERE $55.00 $225.00 $665.00

FROST RIPPER (K080) FROST RIPPER JOHN DEERE 200

$55.00

$225.00 $665.00

BACKHOE LOADER DSL 410E 16,500lbs 15ft - 19ft $600.00 $2,000.00 $5,500.00

KUBOTA KC120H DIESEL TRACK DUMPER WEIGHT 1929LBS CAPACITY 2650LBS

$350.00 $1500.00 $4000.00



49

FANS Description Hourly Daily Weekly 4 Weeks

EN 20-SURE FLAME AIR MOVER 2’ $10.00 $40.00 $120.00

FN-30-SURE FLAME AIR MOVER 3’ $18.00 $72.00 $288.00

CARPET FAN $18.00 $72.00 $288.00

12" AIRMOVER 120V MANHOLE TYPE VAF–3000

$60.00 $160.00 $480.00

DUCTING FOR MANHOLE 12" x 25ft

$15.00

$60.00

$180.00

CARRYING CASE FOR DUCTING, FOR VAF–3000

$10.00 $40.00 $120.00

*NOTE* All Types of Sandpaper Available for Sale *NOTE* Anything Used for Batement Recovery (HEPA) Will Have a

Cleaning Charge



50

FLOORING EQUIPMENT Description Hourly Daily Weekly 4 Weeks

SHOP VACS

SHOP VAC-STD (WET OR DRY) $20.00 $80.00 $240.00

SHOPVAC H/D (WET OR DRY) HUSKY 16-20 GAL $45.00 $135.00 $405.00

SHOP VAC WET / DRY HEPA FILTRATION HUSKY (G5301) 16-20 GAL

*FILTERS EXTRA COST* *CLEANING CHARGE EXTRA*

$60.00 $240.00 $720.00

HILTI VC40 VACCUM, HFL00203852 *BAGS EXTRA CHARGE*

*CLEANING CHARGE EXTRA*

$45.00 $135.00 $405.00

HUSQ VACCUM SYSTEM *FILTERS AND BAGS EXTRA* *CLEANING CHARGE EXTRA*

$90.00 $360.00 $725.00

SHOP VAC KIT $5.00 $15.00 $30.00

CARPET KICKER $12.00 $35.00 $120.00

CARPET EXTRACTOR HUSKY (HS144) *C/W POWER HEAD (12" STEAM BRUSH) 10' HOSE & 3" UPHOLSTERY TOOL

$55.00 $165.00 $495.00

SANDIA SNIPPER HEATED CARPET EXTRACTOR C/W HOSE & SUCTION PIPE

$100.00 $400.00 $1,200.00

LINO ROLLER $20.00 $80.00 $120.00

FLOOR POLISHER AND BUFFER 110v $10.00 $40.00 $120.00

CP ORBITAL POLISHER, AIR

SEAMING IRON $20.00 $60.00 $120.00

FLOOR SANDERS

8" DRUM SANDER HIRETECH (HT8) $60.00 $230.00 $685.00

SQUARE BUFF SANDER 16" $60.00 $230.00 $685.00

7" DISC EDGER $35.00 $125.00 $400.00


Cleaning Charge



51


17" HUSKY FLOOR MAINTAINER 110v

*USED AS A SANDER / POLISHER $60.00 $230.00 $685.00

*USED AS A GRINDER $110.00 $440.00 $1,100.00

10” DUAL HEAD ELECTRIC FLOOR GRINDER 120v 20 AMP RG2112E

$150.00 $600.00 $1400.00

ROTARY HEAD EXTRA

17" - 20" 2 SPEED POLISHER / SCRUBBER 110v HUSKY (R172VP / R20-2VP)

$60.00 $230.00 $685.00

FLOOR MAINTAINER

SANDPAPER HOLDER VELCRO BACK UP PLATE

$20.00 $40.00 $80.00

SAND PAPER / SAND SCREEN WOOL BACK UP PLATE (CLK450212)

$20.00 $40.00 $80.00

STONE BLOCK HOLDER BACK UP PAD $20.00 $40.00 $80.00

FOR REMOVAL OF PAINT, GLUE, EPOXY ON CONCRETE FLOORS

CARBIDE HEX PLATE (HEX17) *FOR HUSKY FLOOR MAINTAINER

$110.00 $440.00 $1100.00

*REPLACEMENT CARBIDES $20.00 EACH *REPLACEMENT PIN / CARBIDE ASSY $60.00 EACH

* CUSTOMER RESPONSIBLE FOR BROKEN / BENT PINS & CARBIDES

* WEIGHTS AVAILABLE FOR MORE AGGRESSIVE WORK

HILTI 02079299 SDSMAX FLEXIBLE CHISEL ATTACHMENT

- TE70 - TE76 - TE5

$25.00 $80.00 $240.00

HILTI 00256233 FLEXIBLE CHISEL ATTACHMENT

- 905 - 1000

$25.00 $80.00 $240.00

TILE SMASHER TROLLEY CART $25.00 $90.00 $260.00


Cleaning Charge



52


(MAKINEX)

HILTI TILE SMASHER HEAD

- TE905

- TE1000

- TE1500

BLADE & BOLTS EXTRA

$25.00 $80.00 $240.00

HUSQ PG280, 125v30am SURFACE GRINDER

*REQUIRES REDILOCK CUTTERS FOR

EXTRA CHARGE*

$100.00 $425.00 $865.00

PAM SURE SHOT SCREW GUN $35.00 $105.00 $315.00

SURFACE PLANER SCARIFIER GAS 5HP HONDA GENERAL SP8

$100.00 $200.00 $600.00

HEAD FAIL KIT GENERAL SP8-6200

$150.00 $450.00 $1200.00

GENERAL WALK BEHIND RIP ‘N’ STRIP $65.00 $250.00 $685.00

BLADES EXTRA

GENERAL HAND-HELD RIP ‘N’ STRIP $45.00 $160.00 $365.00

BLADES EXTRA

VACUUM PUMP (AUTOMOTIVE A/C TYPE) $20.00 $100.00 $350.00

SURFACE CLEANER 20” (RANBY PRESSURE WASHER)

$25.00 $60.00 $165.00

**NOTE: ALL RIP ‘N’ STRIP BLADES CARRY AN EXTRA CHARGE**



53

FORKLIFTS Description Hourly Daily Weekly 4 Weeks

TOYOTA FORKLIFT 3000LBS CAPACITY 240" MAST LIFT HEIGHT (PROPANE / GAS)

$225.00 $800.00 $2200.00

PNEUMATIC TIRES

TOYOTA FORKLIFT 5000LBS CAPACITY 144” MAST LIFT HEIGHT (PROPANE/GAS) PNEUMATIC TIRES

$250.00 $850.00 $2620.00

TELEHANDLER (ZOOM BOOMS) 1/2 DAY

5500lbs 19ft DIESEL 4X4 (GENIE GTH5519) $350.00 $595.00 $2170.00 $6335.00

8000lbs 43-44ft DIESEL 4x4 (I-R / CARELIFT) $350.00 $630.00 $2305.00 $6,720.00

9000lbs 43ft JLG $400.00 $700.00 $2500.00 $7500.00

10,000lbs 54-55ft DIESEL 4x4 C/W OUTRIGGERS (JLG / CARELIFT / GENIE)

$495.00 $895.00 $2,780.00 $8185.00

1200lbs 65ft TELEHANDLER $1,375.00 $3,950.00 $11, 000

ATTACHMENTS/PARTS

BUCKET FOR TELEHANDLER 95in 1.75yds $40.00 $160.00 $450.00

MANBASKET QUICK ATTACH TYPE 10x4ft (JLG) $75.00 $300.00 $900.00

MANBASKET PINION TYPE 10x4ft $75.00 $300.00 $900.00

SPARE TIRE FOR TELEHANDLER $45.00 $180.00 $400.00

FORK EXTENSION 72” X 6” $25.00 $100.00 $300.00 FORK EXTENSION 96” X 6” $50.00 $150.00 $400.00

DELIVERY & PICK-UP CHARGES

HOURLY

TOYOTA FORKLIFT $175.00

TELEHANDLER (ZOOM BOOMS) $175.00

* ALL PRICES PLUS FUEL

* DELIVERY & PICKUP CHARGE APPLIES TO THESE UNITS

$175.00 EACH WAY (WITHIN CITY PROPER) BASED ON HOURLY RATE

* OVERTIME HOURS MAY APPLY

½ DAY RATE BASED ON 4 ½ HRS MAX. FROM TIME LEAVES YARD TO TIME RETURNED

(4 HRS ON METER)

* FORK EXTENSIONS SEE PAGE 66

*Overtime Rates May Apply - Contact Order Desk

PLEASE SPECIFY REQUIRED VOLTAGE & PHASE FOR GENERATORS

SINGLE PHASE: 110, 127, 139, 240, 254, 277

THREE PHASE: 208, 220, 240, 415, 480, 600



54

GENERATORS Description Hourly Daily Weekly 4 Weeks

1000-1700 INVERTER GAS GENERATOR APPROX 60 lbs

$30.00 $120.00 $360.00

2400/2800 WATT GAS POWERED GENERATOR APPROX 105lbs

$30.00 $120.00 $360.00

3200 WATT INVERTER GAS GENERATOR $50.00 $200.00 $600.00

ROBIN RG3200IS

3500/4100 WATT GAS POWERED GENERATOR C/W POWER CORD ADAPTER WEIGHT DRY 55KG 125LBS

$40.00 $160.00 $550.00

5500/6100 WATT GAS POWERED GENERATOR (ROBIN/WISCONSIN RGX4800) C/W POWER CORD ADAPTER WEIGHT 75KGS 170LBS

$50.00 $200.00 $600.00

RGV 7500 WATT GAS POWERED GENERATOR $75.00 $300.00 $900.00

APPROX 210 lbs DRY

3500/5000/6000 WATT DIESEL GENERATOR PORTABLE ROBIN / BLADOR 220LBS DRY WEIGHT

$85.00 $350.00 $995.00

7000 WATT DIESEL GENERATOR ENCLOSED C/W FUEL TANK (KUBOTA GL7000 / WISPER WATT 7000)

$100.00 $500.00 $1,200.00

8KW DIESEL GENERATOR ENCLOSED C/W FUEL TANK

$110.00 $600.00 $1,500.00

TRAILER FOR ABOVE 8KW GENERATOR $20.00 $40.00 $100.00

10-12KW DIESEL GENERATOR W/ SKID FRAME APPROX 750 lbs *NO FUEL TANK*

$120.00 $500.00 $1,650.00

20KW DIESEL GENERATOR W/ SKID FRAME WEIGHT 1310 lbs *NO FUEL TANK*

$150.00 $650.00 $2,000.00

*RUNTIME ON 25 GAL FUEL TANK APPROX. 12HRS



SINGLE PHASE: 110, 127, 139, 240, 254, 277

THREE PHASE: 208, 220, 240, 415, 480, 600



55


20 KW 600V GEN SET C/W TRAILER $300.00 $1,500.00 $3,500.00

20KW DIESEL GENERATOR ENCLOSED W/ FUEL TANK (FRONTIER / I-R / MULTIQUIP / SHIDAWA)

$200.00 $800.00 $2,500.00

TRAILER FOR ABOVE 20KW GENERATOR $25.00 $60.00 $125.00

30KW DIESEL GENERATOR W/ SKID *NO FUEL TANK*

$225.00 $900.00 $2,500.00

G40 30KW DIESEL GENERATOR ENCLOSED W/ FUEL TANK & TRAILER (I-R G40)

$250.00 $1,000.00 $2,835.00

G70 70KW DIESEL GENSET ON TRAILER $410.00 $1,605.00 $4,495.00

G80 80KW DIESEL GENERATOR ENCLOSED W/ FUEL TANK & TRAILER (I-R G80)

$450.00 $1,605.00 $4,695.00

G90 DSL GENSET ENCLOSED W/FUEL TANK TRAILER

$510.00 $2000.00 $6000.00

G125 125KW DIESEL GEN SET ENCLOSED ON TRAILER

$600.00 $2500.00 $7500.00

ELECTRICAL PANELS 1PH WALL MOUNT $50.00 $150.00 $375.00

ELECTRICAL PANEL 3PH WALL MOUNT $50.00 $150.00 $375.00

ELECTRICAL PANEL CONSTRUCTION TYPE SELF CONTAINED FOR OUTDOOR USE

$55.00 $200.00 $400.00

TRANSFORMER 15-75 KVA $75.00 $300.00 $900.00

TRANSFORMER 208-575 VOLTS

$75.00 $300.00 $900.00

LOAD BANK 150KW 240v – 37kw 208v – 55k 480v – 96k 600v – 150kw

$100.00 $500.00 $2,000.00



SINGLE PHASE: 110, 127, 139, 240, 254, 277

THREE PHASE: 208, 220, 240, 415, 480, 600



56


20KW 600V GENSET C/W TRAILER

$300.00 $1500.00 $3500.00

GENERATORS / LIGHT PLANTS Description Hourly Daily Weekly 4 Weeks

LIGHT TOWERS (TRAILER MOUNTED)

L-6 PORTABLE LIGHT TOWER 6KW $210.00 $775.00 $2,270.00

35' MAST 2200lbs C/W 4-1000w MH LIGHTS

L-8 PORTABLE LIGHT TOWER 8KW $230.00 $825.00 $2,435.00

35' MAST 2200lbs C/W 4-1000w MH LIGHTS

14KW PORTABLE LIGHT TOWER $255.00 $1,000.00 $3,000.00

C/W 4 -1000W LIGHT

20KW PORTABLE LIGHT TOWER $385.00 $1,500.00 $4,415.00

GROUND RODS $25.00

GROUND PLATES $25.00

PIG TAIL CORDS

APPROXIMATE AREA ILLUMINATED BY ONE MH FLOODLIGHT 1000W

AVG FT. CANDLES SQ FT ACRES

0.5 82000 1.88

***ALL HEATERS REQUIRING KEROSENE / DIESEL ARE

SUBJECT TO FUEL CHARGES



57

HEATERS Description Hourly Daily Weekly 4 Weeks

KEROSENE FIRED

KEROSENE OMNI 105 15,000 BTU, 6L. $20.00 $50.00 $90.00

KEROWORLD KC 2404

EVERGLOW HEATER LG. ES 12,300 BTU $10.00 $42.00 $84.00

EVERGLOW HEATER SM ES 7,200 BTU $10.00 $35.00

$64.00

KEROSENE HEATER KC2404 $10.00 $40.00 $120.00

KEROSENE FIRED/ELECTRIC DRIVEN

KEROSENE READY HEATERS

BC70/RC70T $30.00 $100.00 $300.00

70,000 BTU, 37LBS,18L.

DFA 65 - 65,000 BTU 19L

BC100/BC115T $35.00 $120.00 $360.00

98,000 BTU, 55LBS, 34L.

DFA 120 - 120,000 BTU 38L

BC150/RC165T $40.00 $135.00 $405.00

150,000 BTU, 77LBS, 51L.

DFA 165

BC350 $50.00 $200.00 $600.00

315,000 BTU, 180LBS 95L

THERMOSTATS FOR READY HEATER $5.00 $15.00 $45.00

111,000 BTU DIRECT RADIANT HEATER SEKI (SHIZVDKA) *KEROSENE ONLY*

$65.00 $265.00 $800.00

KEROSENE/DIESEL FIRED - ELECTRIC DRIVEN

CLEAN -AIR HEATERS

SIAL 90 $55.00 $226.00 $680.00

ACROTHERM E25 (65L) OR… ICE SIAL 90 (46L)

135,000 BTU 110V HEATER SIAL 140 $60.00 $250.00 $700.00 46 LITRES 1”= 7 LITRES





58


180,000 BTU 110V HEATER $66.00 $265.00 $800.00 ACROTHERM EC40 (65L) OR ICE SIAL 180 (50.8L)

CANTHERM EC70 105L $90.00 $330.00 $900.00

CLEAN AIR FROSTFIGHTERS

OHV200 110V 200,00BTU 91L (24 US GAL.) $66.00 $265.00 $800.00

OHV350II 110V 320,000BTU 159L (42 US GAL.) $85.00 $330.00 $900.00

OHV500 110V 420,000BTU 159L (42 US GAL.) $90.00 $350.50 $950.00

OHV600 110V 520,000BTU 159L (42 US GAL.) $95.00 $375.00 $1,000.00

ICE 700 - 700,000 BTU *NO FUEL TANK* $400.00 $1,100.00 $2,600.00

FLO 200 -200,000 BTU 115V 87.6L (23 US GAL.) $85.00 $330.00 $900.00

FLO 400 -400,000 BTU 115V 159L (42 US GAL.) IDH400QR/HR – 300,000 BTU 159L – 20A/115V FVO-400RC -390,000 BTU – 159L – 15A/115V

$85.00 $100.00 $100.00

$330.00 $400.00 $400.00

$900.00 $1200.00 $1200.00

**(MUST HAVE 20AMP BREAKER WITH OHV500 & OHV600)

ICE 1.2 MILLION BTU INDUSTRIAL DIESELFIRED 4000lbs 8420 CFM 230V 1PH (107"w X 60"h X 78"L) 8.5 GAL/HR ON HIGH *NO FUEL TANK*

$625.00 $2,500.00 $7,000.00

MAC INDUSTRIAL CONSTRUCTION HEATER $750.00 $3,000.00 $8,500.00

2.5 MILLION BTU 575 VOLT 9000LBS 18' LONG 8' HIGH 8' WIDE 290 GAL. FUEL TANK

REMOTE THERMOSTAT FOR THE ABOVE ICE/CANTHERM

THERMOSTAT BOX C/W 25 or 50' CORD $7.00 $20.00 $45.00

E1100 C/W GENSET $400.00 $2300.00 $8000.00

E1100 WITHOUT GENSET $300.00 $1800.00 $6500.00

E3000 GROUND HEATER C/W GENSET & 3000 ft HOSE

$800.00 $3,200.00 $11,200.00

*WITHOUT GENSET $700.00 $2,700.00 $10,000.80

PORTABLE HEAT TRAILER FLAGRO 390,000 BTU HEATER GL7000 GENSET SINGLE AXLE TRAILER C/W FUEL TANK

$300.00 $1500.00 $4500.00





59


ALLMAND MAXI HEAT (MODEL 1000) HOT BOX

$500.00 $2,500.00 $6,000.00

FLAGRO FVO1000 1100L FUEL CAPACITY

$500.00

$2500.00 $6000.00

FROST FIGHTER IDH1000 910L FUEL CAPACITY $500.00 $2500.00 $6000.00

HEATER DUCT -CANVAS 12’ x 12” $15.00 $35.00 $110.00

CANVAS / HITEX, 12’ x 25” $20.00 $40.00 $120.00

HEATER DUCT-THERMO HOSE HT 12’x12” $30.00 $60.00 $120.00

HEATER DUCT - CANVAS 15’x16” $30.00 $60.00 $120.00

PROPANE HEATERS

50,000BTU PROPANE HEAT DRAGON RCVLP50A $20.00 $80.00 $240.00

50-100,000 BTU DESA RCLP1000V $25.00 $100.00 $285.00

65-115,000 BTU DESA RCLP115AT $25.00 $100.00 $285.00

200,000 BTU PROPANE (MUNUH-KID60A) $35.00 $105.00 $315.00

15,000 BTU PROPANE TANK TOP HEATER 30,000 BTU PROPANE TANK TOP HEATER

$10.00 $20.00

$30.00 $50.00

$80.00 $100.00

SIOUX HEAT GUN #1402 $10.00 $40.00

MASTER APPLIANCE HEAT GUN $20.00 $80.00

RADIANT PROPANE HEATERS

MH-12-T 12,000 BTU (1 - ROSEBUD) $5.00 $15.00 $50.00

MH-24-T 24,000 BTU (2 – ROSEBUD) $10.00 $45.00 $130.00

BHP16-T 16,000 BTU (GRID) $15.00 $65.00 $200.00

BH32-T 32,000 BTU (GRID) $20.00 $80.00 $260.00

ELECTRIC HEATERS

5,000 BTU/HR 120V 1500W PATRON E1.5 $10.00 $40.00 $120.00

10,200 BTU/HR 240V 3000W PATRON E3 $15.00 $55.00 $135.00

30,700 BTU/HR 240V 9000W PATRON E9 $30.00 $100.00 $265.00

61,400 BTU/HR 240V 3PH 47AMP PATRON 18E $35.00 $150.00 $300.00

133,000 BTU/HR 480V 3PH 60AMP PATRON 40E $40.00 $200.00 $600.00

133,000 BTU/HR 575V 3PH 60AMP PATRON 40ECA $45.00 $225.00 $600.00

15-40,000 BTU/HR 320V 10,000W PATRON EDH10 $35.00 $150.00 $300.00

ELECTRIC PORTABLE CONST HEATERS $10.00 $30.00 $90.00

240 VOLT, 4800 WATT, 5,000 BTU





60


100LB. PROPANE BOTTLE $10.00 $30.00 $90.00

20LB TANK $42.00 ½ TANK $35.00 MIN. $12.00

8" CHIMNEY BRUSH $10.00 $30.00

3' CHIMNEY RODS (EACH) $5.00 $10.00

6” CHIMNEY BLACKE STOVE PIPE

18”, 24”, 36”, 90˚ELBOW

$5.00



61

HAMMERS Description Hourly Daily Weekly 4 Weeks

SLEDGE HAMMER $10.00 $30.00 $60.00

(8lbs, 10lbs, 12lbs, 16lbs)/EA

CLAW HAMMER $3.00 $6.00 $15.00

BALL PEEN HAMMER $3.00 $6.00 $15.00

(8, 16, 24, 32, 48oz)/EA

COMP CAST SLEDGE HAMMER $20.00 $60.00 $170.00

IN-VIRO DRUM Description RATE Daily Weekly 4 Weeks

DRUM DE-HEADER (120v) *CUTTER WHEELS EXTRA COST

$90.00 $300.00 $900.00

DRUM DE-HEADER (PNEUMATIC) C/W TOWER *CUTTER WHEELS EXTRA COST

$100.00 $500.00 $1500.00

ABCAN IN-VIRO DRUM $500.00 $2,500.00 $6,000.00

C/W MODEL 3901 HELI PORTABLE UNIT 1 - IN-VIRO DRUM SUCTION LID 1 - 3" ABS STINGER 1 - 2" ABS STINGER 1 - 3" X 2" ALUM. CAM ADAPTER 1 - ALUMINUM VACUUM WAND 1 - ALUMINUM VACUUM HEAD 3 - 15' X 3" STATIC GUARD, PETRULEUM RESISTANT HOSE W/ ALUMINUM CAMLOCK & LIVE SWIVEL

C-CAN $200.00 $400.00 $1,200.00

WEIGHT 3540 lbs MODEL 3901

45 GAL. DRUM OPEN TOPPED WITH RE-SEALABLE LID (ULC APPROVED) LINED 16GA *AVAILABLE FOR SALE

$135.00ea.



62

JACKS AND HOISTS Description Hourly Daily Weekly 4 Weeks

12 TON HYDRAULIC $14.00 $30.00 $59.00

20 TON HYDRAULIC $18.00 $54.00 $115.00

30 TON HYDRAULIC $25.00 $75.00 $225.00

50 TON HYDRAULIC BOTTLE JACK $35.00 $105.00 $315.00

1 TON FLOOR JACK $15.00 $60.00 $200.00

TRANSMISSION JACK (FLOOR) 1/2 TON $35.00 $140.00 $420.00

HD TRANSMISSION JACK (FLOOR) 1.5 TON $60.00 $240.00 $720.00

TRANSMISSION JACK (UNDER HOIST) TELESCOPING

$50.00

ENGINE CRANE $50.00 $200.00 $420.00

SAFETY STAND $5.00 $20.00 $60.00

RATCHET LEVER (RAILROAD) 15T JACK $50.00 $150.00 $450.00

HAND TRUCK (DOLLY) $15.00 $45.00 $125.00

APPLIANCE TRUCK (DOLLY) $20.00 $60.00 $180.00

WAREHOUSE CART SOLID TIRE BLUE $30.00 $120.00 $250.00

POWERMATE M-1: STAIRCLIMBER HANDTRUCK 1500lbs CAPACITY

$125.00 $550.00 $1,500.00

JACKALL $10.00 $30.00 $90.00

PORTA POWER - 4 TON $20.00 $60.00 $180.00

PORTA POWER - 10 TON $30.00 $100.00 $300.00

PORTA POWER ACCESSORIES

ARM438 RAM 10T X 2 1/4” STROKE

ARM409 RAM 2T X 3” STROKE

ARM437 RAM 4T X 5/8” STROKE

ARM411 RAM 4T X 5” STROKE

PLATE CLAMP 1.5T $25.00 $75.00 $225.00

2 TON BEAM CLAMP $25.00 $55.00 $110.00

PANEL (DRYWALL) LIFT - RAISES UP TO 11' HIGH $30.00 $100.00 $300.00

15' EXTENSION $5.00 $20.00 $60.00

JET 5500LBS PALLET JACK $30.00 $120.00 $250.00

JET SCISSOR LIFT CART ORANGE SLC – 1100lbs $40.00 $200.00 $500.00 HYD SCISSOR LIFT CART – 1100lbs CAPACITY $40.00 $200.00 $500.00



63

JACKS AND HOISTS Description Hourly Daily Weekly 4 Weeks

RAMPS (SET 2) $5.00 $10.00 $20.00 $60.00

4 WHEEL PLATFORM TRUCK $20.00 $60.00 $180.00

SCISSOR LIFT CART JET 1100lbs, 20” x 33” $50.00 $150.00 $450.00

PORTABLE CHAINSAW WINCH (GAS POWERED) $65.00 $260.00 $780.00

CAP 1800LB C/W 1 - PULLEY BLK.

COME ALONGS / CHAIN FALLS / TIRFORS

CHAIN HOIST 3/4 TON, 5FT LIFT $20.00 $65.00 $195.00

CHAIN HOIST 1 TON, 5-15FT LIFT $48.00 $80.00 $220.00

CHAIN HOIST 1-1/2 TON, 5-10FT LIFT $55.00 $95.00 $300.00






COME ALONG 3/4 TON CHAIN TYPE 5ft CHAIN, LEVER HOIST

$35.00 $50.00 $95.00

COME ALONG 1 TON CHAIN TYPE 5-10ft CHAIN, LEVER HOIST

$45.00 $65.00 $155.00

COME ALONG 1 1/2 TON CHAIN TYP 5-10ft CHAIN, LEVER HOIST

$45.00 $65.00 $155.00


$50.00 $100.00 $205.00


$125.00 $400.00 $620.00

TIRFOR 1500lbs LIFT $35.00 $100.00 $250.00

TIRFOR 3000lbs LIFT $40.00 $120.00 $350.00

TIRFOR 6000lbs LIFT $45.00 $135.00 $400.00



64

LADDERS Description Hourly Daily Weekly 4 Weeks

STEP LADDERS

6ft ALUMINIUM STEP LADDER $15.00 $30.00 $120.00




6ft FIBREGLASS STEP LADDER $20.00 $60.00 $180.00




EXTENSION LADDERS

12-20ft ALUMINUM EXTENSION LADDER $15.00 $60.00 $240.00

12-24ft FIBREGLASS $25.00 $100.00 $300.00



20-40ft FIBREGLASS $30.00 $120.00 $380.00

LITTLE GIANT

7-11ft M-13 ALUMINUM LADDER 3-5ft STEP

$15.00 $60.00 $240.00

9-15ft M-17 ALUMINUM LADDER 4-7ft STEP $20.00 $80.00 $240.00





65

LAWN AND GARDEN EQUIPMENT Description Hourly Daily Weekly 4 Weeks

LAWN AERATOR GAS (HUSQVARNA / SNAPPER) ( POWER SLICER)

$25.00 $125.00 $400.00 $1,250.00

LAWN AERATOR (HUSQVARNA AR19) $50.00 $250.00 $750.00

LAWN POWER RAKE GAS (SENSATION / HUSQVARNA / SNAPPER / KEES) S/N 480109

$25.00 $125.00 $400.00 $1,250.00

SNAPPER LAWN MOWER I/C 5-6hp 21" $20.00 $80.00 $240.00 $720.00

SNAPPER LAWNMOWER C/W $20.00 $80.00 $240.00 $720.00

GRASS CATCHER 5HP 21”

ROTOTILLER MINI (FLOWER BED) $25.00 $100.00 $300.00

ROTOTILLER (FRONTLINE) 5hp (SNAPPER / MAXIUM) $25.00 $100.00 $300.00 $430.00

ROTOTILLER (REARTINE) HUSQ700 DRT $50.00 $150.00 $600.00

BCS TRACTOR HARVESTER GAS (HONDA/B&S) $25.00 $100.00 $500.00 $1,500.00

BCS ATTACHMENT - ROTOTILLER - REAR TINE $10.00 $50.00 $100.00 $300.00

BCS ATTACHMENT – SWEEPER 40” $30.00 $75.00 $280.00 $850.00

TRIMMER-ELECTRIC WEED WHIPPER $4.00 $16.00

TRIMMER-STRING 132R (HUSQ.) 32CC $10.00 $45.00 $135.00 $270.00

- GAS POWERED 525LK

TRIMMER - ESTATE 5HP $65.00 $250.00 $750.00

WALK BEHIND

EXTRA STRING ROT RT-9332 $1.20EA

.155 DIA STRING

WHEEL BARROW $10.00 $40.00 $120.00

LOG SPLITTER (GAS POWERED) TOW BEHIND C/W 4 WAY SPLITTER

$80.00 $300.00 $900.00

*REQUIRES 2" BALL HITCH

FERTILIZER SPREADER

$5.00 $10.00 $32.00 $40.00

HAND HELD SPREADER $3.00 $5.00 $10.00 $20.00

LAWN ROLLER $5.00 $10.00 $35.00



66


3ft GREAT RAKE (LANDSCAPE) $3.00 $12.00 $60.00

4ft GREAT RAKE (LANDSCAPE) $4.00 $15.00 $75.00

LONG HANDLED SHOVEL $3.00 $10.00 $30.00

LAWN/GARDEN RAKE $3.00 $10.00 $30.00

PICK/ GRUBHOE $3.00 $10.00 $30.00

18H HEDGE TRIMMER (HUSQ.) $10.00 $45.00 $135.00 $270.00

BACKPACK BLOWER (HUSQ.) $50.00 $200.00 $400.00

POWER BROOM/PADDLE (HUSQ.) $20.00 $60.00 $180.00 $360.00

- GAS POWERED

SWEEP BROOM / PADDLE ATTACHMENT ONLY $15.00 $45.00 $90.00

SNAPPER SG8000 CHIPPER SHREDDER $80.00 $240.00 $720.00

S/N 15148209 8HP

MAX DIAMETER 2"

SPRAY DOC $5.00 $10.00 $30.00

CHEMICAL SPRAYER

GREEN MACHINE WEED CULTIVATOR $6.00 $14.00 $72.00

CHIPPER SHREDDER 6" $350.00 $1,000.00 $3,000.00

25HP - GAS POWERED/SELF FEEDING

MAGSWEEP 24" $10.00 $40.00 $120.00

MAGNETIC SWEEPER

LAWN EDGER – GAS, HUSQVARNA 326ES $45.00 $135.00 $270.00

RHINO GAS POST DRIVER $50.00 $250.00 $750.00

BIG RHINO HYDRAULIC POST DRIVER $80.00 $320.00 $2250.00

REQUIRES AIR COMPRESSOR

SC70 COMPRESSOR $115.00 $445.00 $1,335.00

MANUAL HAND TAMPER

$5.00 $20.00 $40.00

TRIMMER HEAD ATTACHMENT 525LK

$5.00 $15.00 $30.00

SWEEPER BROOM ATTACHMENT 525LK

$15.00 $45.00 $90.00

RHINO MANUAL POST PULLER MP-3 $30.00 $100.00 $300.00



67


HD HUSQVARNA SPREADER / SEEDER 130 LBS

$5.00 $10.00 $35.00 $50.00



68

LEVELS Description Hourly Daily Weekly 4 Weeks

2 FT. BUILDERS LEVEL (SPIRIT) $4.00 $12.00 $25.00

4 FT. BUILDERS LEVEL (SPIRIT) $6.00 $18.00 $45.00

EL-1 ELECTRONIC LEVEL L. $80.00 $300.00 $900.00

TRIPOD, DUCT-READ OUT SENSOR

DUTCH HILL TRIPOD ONLY $12.00 $48.00 $144.00

3M/4 METER GRADE ROD ONLY $5.00 $15.00 $50.00

THEODOLITE DIGITAL TRANSITE NETH20 C/W TRIPOD

$80.00 $300.00 $900.00

HORIZONTAL VERTICAL 1452XL LASER LEVEL (VISUAL LASER) C/W TRIPOD & GRADE ROD

$80.00 $300.00 $900.00

LASER RECEIVER (FOR ABOVE) HR500 $25.00 $75.00 $225.00

32X AUTO LEVEL (BUILDERS) C/W TRIPOD & GRADE ROD

$45.00 $135.00 $405.00

TRIPOD ALUMINUM OR FIBREGLASS $10.00 $30.00 $100.00

METAL DETECTOR #101 MAGNATRAK / CST (MAGNETIC LOCATOR)

$35.00 $90.00 $180.00

WATER LEVEL STD. ANTIFREEZE $45.00 $90.00 $270.00

PRISM POLE $10.00 $30.00 $90.00



69

LIGHTS Description Hourly Daily Weekly 4 Weeks

CONSTRUCTION LIGHT STRING C/W SOCKETS

$4.00 $12.00 $24.00

FLOOD LIGHT 500 WATT W/ TRIPOD $5.00 $20.00 $60.00

FLOOD LIGHT TWIN 500 WATT W/ TRIPOD $7.50 $22.50 $67.50

FLOOD LIGHT (SINGLE) 110V 1000W C/W STAND & WHEELS

$45.00 $135.00 $400.00

FLOOD LIGHT (TWIN) 110V 1000W C/W 12ft STAND & WHEELS

$60.00 $165.00 $500.00

*I/R L6 LIGHT TOWER 6KW - DIESEL 4-1000 WATT

$210.00 $775.00 $2,270.00

* I/R L8 LIGHT TOWER 8 KW DIESEL 4-1000 WATT

$230.00 $825.00 $2,435.00

* POWER TOWER 14KW DIESEL 4-1000 WATT

$255.00 $1,000.00 $2,945.00

I/R L20 20KW DIESEL 4-1000 WATT $385.00 $1,500.00 $4,415.00

*OVERTIME HOURS MAY APPLY



70

LOADERS (SKIDSTEER)

(SKIDSTEER LOADERS C/W 1 x BUCKET OR FORKS) Description Daily Weekly 4 Weeks

463, S70 SKID-STEER $200.00 $800.00 $2,400.00

LIFTING CAPACITY 700LBS, WEIGHT 2708LBS,

LIFT HEIGHT 7'9"

S100 SKID-STEER $250.00 $900.00 $2,700.00

LIFTING CAPACITY 1000LBS, WEIGHT

LIFT HEIGHT

S175, S185, S550 SKID-STEER $300.00 $1,000.00 $3,000.00

LIFTING CAPACITY 1750LBS / 1850 LBS

WEIGHT 6220LBS, LIFT HEIGHT 9'8"

S630 SKID-STEER $300.00 $1,200.00 $3,500.00

LIFTING CAPACITY 2050LBS, WEIGHT 6655 LBS

LIFT HEIGHT 9'8"

S300, S650 SKID-STEER $300.00 $1,200.00 $3,500.00

LIFTING CAPACITY 2500LBS / 3000LBS

WEIGHT 7723LBS/8448LBS, LIFT HEIGHT 10'7"

S750 SKID-STEER $350.00 $1,500.00 $4,500.00

LIFTING CAPACITY 3300LBS, WEIGHT 9185 LBS

LIFT HEIGHT 10'8"

T630 TRACK LOADER $350.00 $1,500.00 $4,500.00

LIFTING CAPACITY 2230LBS

T250, T300 TRACK LOADER $350.00 $1,500.00 $4,500.00


WEIGHT 9347LBS / 9705LBS, LIFT HEIGHT 10'7"

T320, T870/SVL90 TRACK LOADER $450.00 $2,000.00 $5,500.00

LIFTING CAPACITY 3200LBS, WEIGHT 9705LBS

LIFT HEIGHT 10'7"



71

LOADERS (SKID-STEER MINI TRACK LOADERS)

Description Daily Weekly 4 Weeks

MT50, MT52 MINI TRACK LOADER $200.00 $800.00 $2,400.00


WEIGHT 2510LBS, LIFT HEIGHT 5'9"

5.1 CUBIC FEET BUCKET EDGE TYPE

MT55 MINI TRACK LOADER $225.00 $900.00 $2,700.00

LIFTING CAPACITY 550LBS, WEIGHT 2700LBS

LIFT HEIGHT 5'9"

LOADERS (SKID-STEER ATTACHMENTS)* Description Daily Weekly 4 Weeks

36" BUCKET

$30.00 $120.00 $360.00

50" BUCKET

$30.00 $120.00 $360.00

60"-74" BUCKET

$30.00 $120.00 $360.00

80"-88"BUCKET

$30.00 $120.00 $360.00

100" SNOW BUCKET

$38.50 $155.00 $465.00

PALLET FORKS (2500LBS CAPACITY)

$40.00 $160.00 $480.00

PALLET FORKS HD (3000LBS CAPACITY)

$45.00 $175.00 $500.00

FORK EXTENSIONS 72” FITS UP TO 6”x 48” FORKS

$25.00 $100.00 $300.00

FORK EXTENSIONS 96” x 6” $50.00 $150.00 $400.00

80” DOZER BLADE 6-WAY

$90.00 $355.00 $1,065.00

SPREADER

$150.00 $500.00 $1,200.00

SKID-STEER HYDRAULIC BREAKER

$300.00 $1,200.00 $3,500.00

TRENCHER LT303

$250.00 $900.00 $2,500.00



72

LOADERS (SKID-STEER ATTACHMENTS)* Description Daily Weekly 4 Weeks

68” ANGLE BROOM NEW BRISTAL LENGTH 7.5” REQUIRES HOSE GUIDE #7187118

$250.00 $800.00 $2,400.00

72” PICK UP SWEEPER REQUIRES HOSE GUIDE #7187118

$275.00 $1,000.00 $2,500.00

SB200 SNOWBLOWER 72" STANDARD FLOW REQUIRES HOSE GUIDE #7187118

$200.00 $800.00 $2,400.00

72" ROTARY MOWER BRUSHCUT (PLUS BLADES) $250.00 $1,000.00 $3,000.00

SKID-STEERR MODEL 30 AUGER DRIVE REQUIRES HOSE GUIDE #7187118

$100.00 $400.00 $900.00

AUGER EXTENSION (4' ADJUSTABLE) $30.00 $120.00 $360.00

AUGER BIT 9" & 12" $40.00 $160.00 $480.00

ROCK BIT 9” $80.00 $320.00 $960.00

AUGER BIT 15" $60.00 $240.00 $540.00

AUGER BIT 24" $70.00 $280.00 $660.00

AUGER ADAPTER (ROUND TO HEX) $15.00 $40.00 $85.00

*CUSTOMER RESPONSIBLE FOR CUTTING EDGES & TEETH



73

LOADERS (SKID-STEER PARTS & ACCESSORIES) Description Daily Weekly 4 Weeks

SKID-STEER SPARE TIRE $28.00 $82.00 $241.00

LOADERS Description 1/2 Day Daily Weekly 4 Weeks

KUBOTA R520 LOADER $350.00 $1,500.00 $4,500.00

ATTACHMENTS:

68" KUBOTA BUCKET (EDGE TYPE) $30.00 $120.00 $360.00

48" KUBOTA PALLET FORKS $40.00 $160.00 $480.00

DOOSAN DL250TC FRONTEND WHEELER LOADER 163HP WEIGHT: 32,106 LBS CAPACITY: 18,000 LBS C/W BUCKET OR FORKS

$1,000.00 $4,000.00 $12,000.00

ATTACHMENTS:

108” BUCKETGP 3.5 YD BOCE $225.00 $600.00 $2,000.00

120” BUCKETLM 5.0 YD BOCE $300.00 $900.00 $2,500.00

60” PALLET FORKS $50.00 $200.00 $600.00

LOADERS (BACKHOE) Description 1/2 Day Daily Weekly 4 Weeks

LOADER/BACKHOE DIESEL 410G $600.00 $2,000.00 $5,500.00

16,500LBS, 15'-19'

BACKHOE BUCKET 12" $33.00 $130.00 $255.00

LOADER/BACKHOE DIESEL 410G $600.00 $2,000.00 $5,500.00

16,500LBS, 15'-19'

½ DAY RATE BASED ON 4 ½ HRS MAX. FROM TIME LEAVES YARD TO TIME RETURNED

(4 HRS ON METER)



74

PAINT & WALLPAPER EQUIPMENT Description Hourly Daily Weekly 4 Weeks

* VOLUME AIR PAINT SPRAYER $35.00 $105.00 $300.00

CLEANING $35.00 EXTRA

* HERO PAINT PUMP $85.00 $340.00 $1,020.00

3 GAL, 2000 LBS PRESSURE

EXTRA 50 FT. HOSE $10.00 $40.00 $120.00

Cleaning $65.00 Extra

WALLPAPER STRIPPER $20.00 $80.00 $240.00

TEXTURE GUN AND HOPPER PC301 $15.00 $48.00 $144.00

STIPPLE MACHINE PC300 $70.00 $280.00 $780.00

C/W GUN & HOPPER PC301

PAINT MIXER $4.00 $12.00 $35.00

FOAM DISPENSER (HILTI CF-DS 1) $10.00 $40.00 $80.00

** CLEANING SOLVENT ALSO AVAILABLE

ALL PAINTING EQUIPMENT MUST BE RETURNED CLEAN OR CLEANING CHARGES WILL APPLY

PARTY EQUIPMENT Description Hourly Daily Weekly 4 Weeks

BBQ PROPANE 36” $100.00

BBQ PROPANE 48" $100.00

ROTISSERIE FOR 48” BBQ $50.00

BBQ PROPANE 60” $150.00

CLEANING IS EXTRA CHARGE (2 DAYS, 1 DAY FOR CLEANING). RECOMMEND USING PAM OR EASY OFF TO CUSTOMERS CLEANING THEMSELVES.



75

PIPE CUTTERS Description Hourly Daily Weekly 4 Weeks

MINI CUTTERS $1.00 $4.00 $12.00

1/8” - 1” $2.00 $8.00 $24.00

1” - 2” $12.00 $48.00 $96.00

2” - 4” $15.00 $60.00 $120.00

PIPE WRENCH 14 OR 18" ALUMINUM $10.00 $40.00

PIPE WRENCH - 36” $15.00 $60.00 $100.00

PIPE WRENCH 48" ALUMINUM $20.00 $80.00 $120.00

PIPE STANDS PIPE STAND "V" TOP ADJUSTABLE $14.00 $30.00 $62.00

ROLLER HEAD 1" - 8" $7.00 $12.00 $25.00

FOR ADJUSTABLE PIPE STAND

PLUMBING EQUIPMENT Description Hourly Daily Weekly 4 Weeks

POLY B CRIMPING PLIER 1/2” X 3/4” $10.00 $30.00 $90.00

01 - HANDY DRAIN CLEANER $10.00 $40.00 $120.00

BASIN 25 FT. SNAKE 1” 1 1/2”

01 - 3A HANDY CLOSET AUGER $8.00 $32.00 $96.00

( CLEANING TOILET TRAP)

RIDGID K-39 $40.00 $160.00 $220.00

3/4" - 2-1/2" CAPACITY, 110V POWER

5/16" x 25FT CABLE

RIDGID K60SP $80.00 $250.00 $745.00

110V POWER 1 1/4" - 4" CAPACITY

7/8" x 75FT CABLE DRAIN CLEANER

HAND PIPE THREADER KIT 3/8" - 2" $30.00 $120.00 $360.00



76

PLUMBING EQUIPMENT Description Hourly Daily Weekly 4 Weeks

RIDGID 300 POWER VISE $50.00 $150.00 $450.00

(VISE ONLY C/W TRIPOD # 1206)

1/2" - 2" CAPACITY

DIES (SET OF 4) $10.00 $20.00 $30.00

1/2" - 3/4" OR 1" - 2" NPT

DIE HEAD ONLY # 811A $10.00 $20.00 $40.00

C/W 1 SET OF DIES

#311 CARRIAGE C/W LEVER, #341 REAMER, $20.00 $60.00 $180.00

#360 CUTTER & 1 SET OF DIES 1/2" - 3/4"

OR 1" - 2"

OIL POT #418 MANUAL OILER $10.00 $20.00 $60.00

TRANSPORTER #32 $10.00 $20.00 $40.00

PIPE THREADER 2-1/2" - 4" RIDGID 141 $50.00 $150.00 $440.00

UNIVERSAL DRIVESHAFT FOR RIDGID 141 $10.00 $25.00 $75.00

NIPPLE CHUCK #819 KIT (51005 $10.00 $24.00 $65.00

TRISTAND CHAIN VISE 1/8" - 6" RIDGID 460 $20.00 $40.00 $92.00

RIDGID 300 COMES WITH YELLOW BOX COMPLETE $110.00 $290.00 $800.00

NOTE: DIES & CUTTER WHEELS MAY BE CHARGED OUT ON WEAR OR DAMAGE: RID441875 #360 CUTTER WHEELS / RID 47745 #811A 1/2" - 3/4" DIES / RID47750 #811A 1" - 2" DIES OIL IS EXTRA: RID70835 1 GAL NU - CLEAR OIL RID70830 1 GAL DARK CUTTING OIL



77

PRESSURE WASHERS Description Hourly Daily Weekly 4 Weeks

JET BOX 1000 PSI ELECTRIC $10.00 $40.00 $160.00 $480.00

POWERJET 2E2-11021DM 1000PSI 110v

POWER JET PG4-30321M $70.00 $280.00 $840.00

3000PSI HONDA GAS

ALKOTA 1500 PSI ELECTRIC/DIESEL FIRED $80.00 $320.00 $960.00

HOT WATER PRESSURE WASHER

2.1GPM 4.25LBS

WITH STEAM ATTACHMENT - EXTRA $10.00 $40.00 $120.00

FOOT PEDAL $25.00 $60.00 $80.00

LANDA ELECTRIC/DIESEL FIRED $130.00 $500.00 $1500.00

3000 PSI 220V 640LBS

3.9 GPM, PHW4 – 3002YA

LANDA SLT6-32824E $500.00 $1500.00 $4500.00

3200 PSI @ 6GPM

DIESEL POWERED / HOT WATER / STEAMER

PRESSURE WASHER ON SKID

C/W 50FT PRESSURE HOSE & WAND

C/W 50FT STEAM HOSE & WAND

ARCTIC BLASTER $50.00 $150.00 $300.00

SURFACE CLEANER 20”, RUNS BY PRESSURE WASHER

$25.00 $60.00 $165.00

* NOTE * SOAP AVAILABLE FOR PURCHASE

TURBO NOZZLE (LRG) 3000-5000 PSI $15.00 $60.00 $180.00

TURBO NOZZLE JR (SMALL) 3000 PSI $15.00 $60.00 $120.00

PRESSURE WASHER HOSE 3/8”X50’ $7.00 $28.00 $84.53

PRESSURE WASHER HOSE 3/8”X100’ $14.00 $56.00 $170.00



78

PUMPS Description Hourly Daily Weekly 4 Weeks

GEAR PUMP 115V LIBERTY (WASTE OIL/GLYCOL)

$40.00 $160.00 $300.00

SIMER GEYSER SUBMERSIBLE PUMP $15.00 $60.00 $120.00

(GARDEN HOSE) 3/4”

2” U-40K SUBMERSIBLE PUMP $30.00 $120.00 $360.00

C/W 20 FT. DISCHARGE HOSE

2” SUBMERSIBLE TRASH PUMP $35.00 $140.00 $420.00

3" US-75A SUBMERSIBLE PUMP $35.00 $140.00 $420.00

C/W 20 FT. DISCHARGE

3” SUBMERSIBLE TRASH PUMP $40.00 $160.00 $400.00

110V 15V FLOATING PUMP SWITCH $5.00 $15.00 $40.00

(FLOAT SWITCH)

1” CENT. PUMP (GAS) $25.00 $100.00 $300.00

C/W 17 FT. PICK UP HOSE 50 FT. DISCHARGE HOSE

2” CENT. PUMP (GAS) $40.00 $160.00 $480.00

C/W 25 FT. PICK UP HOSE

50 FT. DISCHARGE HOSE

2" TRASH PUMP (GAS) $65.00 $260.00 $780.00

2” CENT. PUMP (DIESEL) $62.50 $250.00 $750.00

2” GAS GORMAN-RUPP FUEL TRANSFER PUMP 82D1-EXL3X

$205.00 $610.00 $1830.00

2” ELECTRIC GORMAN-RUPP FUEL T/FER PUMP $250.00 $500.00 $1500.00

02K3-X2-1P 208V

3” CENT. PUMP (GAS) $45.00 $180.00 $540.00



3” TRASH PUMP (GAS) $75.00 $300.00 $900.00


50 FT. DISCHARGE

3” CENT PUMP (ROBIN DIESEL OR TSURUMI) $68.75 $275.00 $825.00

C/W 25FT. PICKUP HOSE

50’ DISCHARGE HOSE

3” DIESEL GORMAN-RUPP FUEL TRANSFER PUMP 83A1L100E EX

$450.00 $1350.00 $4050.00



79


4" GASOLINE TRASH PUMP (ROBIN PTV-405T) $100.00 $400.00 $1,200.00

C/W 1 FT - 25 FT PICK UP HOSE

C/W 1 FT - 50 FT DISCHARGE HOSE

4" DIESEL TRASH PUMP (ROBIN PTD-405T) $125.00 $500.00 $1,500.00

C/W 1 FT - 25 FT PICK UP HOSE

C/W 1 FT - 50 FT DISCHARGE HOSE

GORMAN RUPP

4” DIESEL PUMP (SKIDDED) NO HOSE $135.00 $550.00 $1,580.00

AS ABOVE PUMP:

W ITH 4” X 25’ SUCTION & 4" X 50' DISCHARGE HOSE

$172.00 $649.20 $2,084.60

AS ABOVE PUMP:

WITH TRAILER NO HOSE $144.00 $562.80 $1,821.60

AS ABOVE PUMP:

WITH TRAILER & HOSE $184.00 $682.85 $2,186.60

6" CENT. PUMP (GAS) $170.25 $681.00 $2,043.05



GORMAN RUPP

6” DIESEL PUMP (SKIDDED) NO HOSE $415.00 $1,195.00 $3,470.00

AS ABOVE PUMP:

WITH 6” X 25’ SUCTION & 6" X 50' DISCHARGE HOSE

$437.00 $1,333.60 $3,803.20

AS ABOVE PUMP:

WITH TRAILER NO HOSE $475.00 $1,425.60 $4,141.20

AS ABOVE PUMP:

WITH TRAIL & HOSE $527.00 $1,633.60 $4,637.20

3” DIAPHRAGM QPD30 (GAS) $50.00 $200.00 $600.00

C/W 20 FT. PICKUP HOSE


GEAR PUMP 115V LIBERTY (WASTE OIL/GLYCOL) $40.00 $160.00 $300.00

TSUTHP-4070HA TSURUMI HIGH PRESSURE $62.50 $250.00 $750.00

1 ½” C/W 20’ PICKUP 50’ DISCHARGE HOSE

4 CYCLE GAS

1-1/2" MARK III 2 CYCLE FIRE PUMP $200.00 $600.00 $1,800.00

C/W 10 FT SUCTION HOSE & JERRY CAN

1" AIR OPERATED DIAPHRAGM PUMP $62.00 $245.00 $730.00

2" AIR OPERATED DIAPHRAGM PUMP $72.00 $280.00 $815.00

PONY PUMP 115V $20.00 $60.00 $120.00



80


C/W SHORT GARDEN HOSE

WATER BED PUMP 110V $10.00 $40.00 $120.00

BAKER PUMP HAND TYPE HP1000 $42.00 $125.00 $360.00

3000 PSI PRESSURE PUMP

BARREL PUMP MANUAL (HAND TYPE) 3/4" $20.00 $60.00 $180.00

*C/W FILTER / SEPERATOR $25.00 $75.00 $225.00

FILL RITE BARREL PUMP 12V & 115V (15-20 GPM) $40.00 $120.00 $360.00

FILL RITE BARREL PUMP 12V & 115V (12-15 GPM) $25.00 $75.00 $225.00

FILTER FUEL (ATTACHES TO PUMP OUTLET) $10.00 $30.00 $90.00

*MUST BUY FILTER CARTRIDGE

1-1/4" ELECTRIC 115V 1HP FUEL TRANSFER EXPLOSION-PROOF PUMP (MONARCH BSE-100XV)

$60.00 $225.00 $675.00

TYPHOON FLOOD PUMP $110.00 $330.00 $990.00

(USES 6" - 8" ICE AUGER HOLE)

DISCHARGE HOSE

1”X50’ RED RUBBER $10.00 $25.00 $75.00

1”X50’ BLK RUBBER (FUEL COMPATIBLE) $15.00 $45.00 $135.00

1"X100' BLK RUBBER (FUEL COMPATIBLE) $30.00 $90.00 $180.00

DISCHARGE HOSE (PLASTIC LAYFLAT)

1” X 50’ 1-1/2” X 100’ FORESTRY HOSE

$10.00 $12.00

$25.00 $30.00

$75.00 $90.00

2” X 50’ $12.00 $30.00 $90.00

2” X 100’ $18.00 $50.00 $150.00

2” X 300’

$40.00 $115.00 $350.00

DISCHARGE HOSE (PLASTIC LAYFLAT)

3” X 50’ $15.00 $45.00 $130.00

3” X 100’ $28.00 $80.00 $240.00

3” X 300’ $52.00 $156.00 $435.00

4”X 50’ $22.00 $65.00 $200.00

4"X100' $35.00 $105.00 $320.00



81


4”X 300’ $100.00 $300.00 $900.00

6”X 50’

$20.00 $80.00 $240.00

DISCHARGE HOSE (LAYFLAT) BLACK RUBBER

2” X 20’ – 25’ $12.00 $30.00 $90.00

2” X 50’ $18.00 $50.00 $150.00

3” X 20’ – 25’ $15.00 $45.00 $130.00

3” X 50’ $28.00 $80.00 $240.00

4” X 20’ $28.00 $80.00 $240.00

6” X 25’ $32.00 $128.00 $256.00

6” X 50’ $35.00 $150.00 $320.00

SUCTION HOSE (BLACK OR RED RUBBER)

1” X 20’ $10.00 $40.00 $120.00

2” X 20’ $10.00 $40.00 $120.00

3” X 20’ $12.00 $48.00 $144.00

4”X 20’ $18.00 $55.00 $165.00

6” X 20’ $32.00 $128.00 $256.00

FUEL TRANSFER HOSE

2” X 15’ ARCTIC FUEL TRANSFER HOSE $15.00 $50.00 $150.00




GARDEN HOSE

25' $3.00 $12.00 $36.00

50' $5.00 $20.00 $60.00

FIRE HOSE

1.5” X 50’ 1.5” X 100”

$15.00 $30..00

$35.00 ^60.00

$70.00 $90.00

P-1 PUNCH LOCK TOOL (HOSE REPAIR) $10.00 $40.00 $120.00

295L (65G) WESTEEL TIDY TANK $30.00 $50.00 $150.00

450L (100G) WESTEEL TIDY TANK $45.00 $105.00 $315.00

615L (135G) TIDY TANK $50.00 $125.00 $400.00



82


750L (165G) TIDY TANK $60.00 $150.00 $500.00

1000L FUELCUBE TRANSCUBE

$80.00 $325.00 $975.00

OIL CUBE / CUBE OIL (MUST BE RETURNED CLEAN)

$45.00 $105.00 $315.00

UNICUBE 1000L FOR WATER $45.00 $105.00 $315.00

REBAR BENDERS / SHEARS Description Hourly Daily Weekly 4 Weeks

MQ REBAR BENDER 25mm CAPACITY 300 LBS 110v 5sec. FOR 180 DEGREE RANGE 0-180

$60.00 $165.00 $500.00

GENSCO REBAR BENDER LRB40 220v 3PH 500KG $185.00 $555.00 $1,665.00

GENSCO REBAR SHEAR 220v 3PH 60hz UP TO CAPACITY 1

$115.00 $345.00 $1,045.00

GAS / DIESEL ENGINE REBAR BENDER / SHEAR TRAILER MOUNT

$500.00 $1,500.00 $3,500.00

**SUBJECT TO AVAILABILITY

SAFETY EQUIPMENT Description Hourly Daily Weekly 4 Weeks

CHAINSAW HARD HELMUT $5.00 $20.00 $60.00

C/W MUFFS & SHIELD SCREEN

CHAINSAW SAFETY CHAPS $5.00 $20.00 $60.00

CG9A

LANYARD 6' SHOCK ABSORBER $15.00 $28.00 $46.00

LANYARD 30'/50' RETRACTABLE $55.00 $115.00 $275.00



83

SAFETY BODY HARNESS $15.00 $44.00 $82.00

FIRE EXTINGUISHER 5 LBS ABC $10.00 $20.00 $35.00



WHEEL CHOCKS (PAIR / SET) VARIETY OF SIZES AVAILABLE $25.00

ABOVE CHAINSAW PANTS, LANYARDS & HARNESS: IF RETURNED CUT,

RIPPED OR FULL OF PAINT ITEM MUST BE BOUGHT

SANDERS Description Hourly Daily Weekly 4 Weeks

* VIBRATOR SANDER $6.00 $20.00 $50.00

* BELT SANDER 3" x 24" $25.00 $60.00 $120.00

* ORBITAL SANDER AIR CP $10.00 $40.00 $95.00

* POLE SANDER $5.00 $20.00

FLOOR SANDERS

8" DRUM SANDER HIRETECH (HT8) $60.00 $230.00 $685.00

SQUARE BUFF SANDER 16" $60.00 $230.00 $685.00

7" DISC EDGER HIRETECH PE7 $35.00 $125.00 $400.00

17" HUSKY FLOOR MAINTAINER 110v

*USED AS A SANDER / POLISHER $60.00 $230.00 $685.00

*USED AS A GRINDER $110.00 $440.00 $1,100.00

17" - 20" 2 SPEED POLISHER / SCRUBBER 110v HUSKY (R172VP / R20-2VP)

$60.00 $230.00 $685.00

FLOOR MAINTAINER

SANDPAPER HOLDER VELCRO BACK UP PLATE $20.00 $40.00 $80.00

SAND PAPER / SAND SCREEN WOOL BACK UP PLATE

$20.00 $40.00 $80.00

STONE BLOCK HOLDER BACK UP PAD $20.00 $40.00 $80.00

FOR REMOVAL OF PAINT, GLUE, EPOXY ON CONCRETE FLOORS

CARBIDE HEX PLATE (HEX17) *FOR HUSKY FLOOR MAINTAINER

$75.00 $200.00 $600.00

*REPLACEMENT CARBIDES $20.00 ea. *REPLACEMENT PIN / CARBIDE ASSY $60.00 ea.



84

SANDERS Description Hourly Daily Weekly 4 Weeks

SANDBLASTER

CLEMCO 1042 1.0CF CAPACITY C/W 25' - 1/2" BLAST HOSE ASSY & UT #4 NOZZLE

$150.00 $350.00 $1,050.00

CLEMCO 1648 3.0CF CAPACITY $200.00 $465.00 $1,400.00

C/W 50' - 1" BLAST HOSE ASSY

UDC 4AC NOZZLE & PGK COUPLING / HOSE WASHERS

NV - 2000 NOVA RESPIRATOR $50.00 $150.00 $300.00

41AP - 2 AIR PURIFIER

50' BREATHING AIR HOSE ASSY

**WEIGHTS AVAILABLE FOR MORE AGGRESSIVE WORK **CUSTOMER RESPONSIBLE FOR BROKEN / BENT PINS & CARBIDES

*NOTE* All Types of Sandpaper, Blasting Sand & Beads Available

* ALL BLADES AVAILABLE FOR SALE ** NOTE: BLADE CHARGE WILL APPLY WHEN ANY BLADE IS USED *** SEE DIAMOND BLADE RENTAL

BLADE WEAR IS AN EXTRA CHARGE NOT INCLUDED IN SAW RENTAL RATES



85

SAWS Description Hourly Daily Weekly 4 Weeks

BRUSH CUTTER 322R $10.00 $45.00 $110.00

BRUSH CUTTER 232R $10.00 $45.00 $135.00 $405.00

BRUSH CUTTER 265R $60.00 $180.00 $540.00

C/W HARNESS & HELMET

* ** CUT OFF SAW 12” (GAS) $50.00 $200.00 $425.00

* ** CUT OFF SAW 14” (GAS) $65.00 $260.00 $520.00

* ** CUT OFF SAW 16” (GAS) $75.00 $350.00 $600.00

* ** 12” ELECTRIC CUT-OFF SAW 12” OR 14” $45.00 $180.00 $360.00

PORTABLE WATER TANK (FOR SAWS) PUMP BOTTLE

$10.00 $40.00 $80.00

WATER CARRIER FOR 14 " CUT-OFF SAW $15.00 $60.00 $180.00

CHAINSAW ( ELECTRIC) $45.00 $135.00 $270.00

SHARPENING CHARGE EXTRA (SEE BELOW)

CHAINSAW KIT $50.00 $200.00 $400.00

C/W 15”, 16” OR 18” BAR


394 WITH 24” BAR C/W KIT $70.00 $250.00 $450.00


394 WITH 37” BAR C/W KIT $80.00 $300.00 $630.00


3120 WITH 60” BAR C/W KIT $85.00 $400.00 $720.00


*SEE SAFETY EQUIPMENT PAGE





86


HUSQVARNA POLE SAW $80.00 $300.00 $500.00

SHARPENING CHARGES

CHAINSHARP→16” (UP TO 16”) $10.00

CHAINSHARP 16+ (16” AND ABOVE) $12.00

CHAINSHARP24”+ (24” AND ABOVE) $20.00

CHOPSAW ELECTRIC 14” $30.00 $120.00 $360.00

MITER SAW $20.00 $60.00 $180.00

14" (MAKITA LS1400)

12" (DEWALT)

JIG SAW $8.00 $25.00 $50.00

RECIPROCATING SAW (SAWZALL) $15.00 $50.00 $150.00

SKILL SAW 7 1/4” BLADE $10.00 $24.00 $80.00

HILTI SKILL SAW 7-1/4” BLADE WSC 167 $25.00 $100.00 $300.00

8" METAL CUT SAW (MILWAUKEE) $55.00

SKILL SAW TYPE

*BLADE SOLD SEPERATELY

TABLE SAW 10” $50.00 $150.00 $450.00

**TILE SAW 7" - 10" $65.00 $260.00 $520.00

14" MASONARY SAW TABLE / BRICK (ELECTRIC) $90.00 $320.00 $640.00

14" MASONARY SAW TABLE / BRICK (GAS) $100.00 $400.00 $800.00

TS355G





87


VANCON CORE SAW 14” 230V 3HP $200.00 $660.00 $2000.00

C/W CRATE, PUMP, STAND

K650 CUT-N-BREAK GAS 9", 16" CUT DEPTH

$100.00 $400.00 $1,200.00

K3000 CUT-N-BREAK ELECTRIC 110V 9”, 16” CUT DEPTH

$100.00 $400.00 $1200.00

BLADE CHARGE SEE P.30

DIAMOND BLADES SEE P.30-31

ICS 633GC-14" GAS POWERED DIAMOND CHAINSAW

$250.00 $1,000.00 $3,000.00

ICS SPEED HOOK SYSTEM $55.00 $220.00 $660.00

DIAMOND SAW

CHAIN CHARGE $18.00/THOUSAND

14" SLAB SAW GAS WALK BEHIND FS309 (GAS) $75.00 $260.00 $500.00

**20" ROADSAW 20HP (GAS) $90.00 $360.00 $1,080.00

FS25P0HE20

WATER DRUM C/W BALL VALVE & GHF $5.00 $20.00 $50.00

HOLE SAWS C/W ARBOR

BI-METAL 9/16” - 2” $15.00 $60.00

BI-METAL 2” - 4” $20.00 $80.00

BI-METAL 4 1/2” $25.00 $100.00

BI-METAL 5” $28.00 $112.00

BI-METAL 6” $30.00 $120.00

CARBIDE TIPPED 3/4” - 2” $20.00 $80.00

CARBIDE TIPPED 2” - 4” $25.00 $100.00

CARBIDE TIPPED 4 1/2” $30.00 $120.00

CARBIDE TIPPED 5” $40.00 $160.00

CARBIDE TIPPED 6” $50.00 $200.00



88

SCAFFOLDING Description Hourly Daily Weekly 4 Weeks

FRAME & BRACE TYPE *Priced by the each

FRAMES

H 5ft x W 5ft FRAME (1.690 OD) 40lbs SCAF5R $5.00 $10.00 $20.00

H 3ft x W 5ft FRAM (1/2 FRAME) 30lbs SCAF3R $5.00 $10.00 $20.00

H 5ft x W 3ft FRAME (NF) 25lbs SCANF3R $5.00 $10.00 $20.00

BRACES

10x4ft CROSS BRACE 10ft 9in 14lbs SCAB104R $3.50 $7.00 $14.00

10x2ft CROSS BRACE (1/2 SECTION) 12lbs SCAB102R $3.50 $7.00 $14.00


7x2ft CROSS BRACE 87ft 1/2in (1/2 SECTION) 10lbs SCAB72R $2.50 $5.00 $10.00


DECKS / PLANKS

3ft ALUMINUM DECK 19” WIDE 13.5lbs SCAAD3R $4.00 $15.00 $40.00



10ft ALUMINUM DECK 19” WIDE 42lbs SCAAD10R $6.00 $24.00 $72.00

24ft ALUMINUM PLANK 18” WITH HANDLES $170.00

16ft MICRO PLANK W 9.5” x D 1.5ft 61.5lbs SCAWP16RR $10.00

12ft MICRO PLANK W 9.5” x D 1.5ft 48lbs SCAWP12R $9.00


8ft MICRO PLANK W 9.5” x D 1.5ft 29.5lbs SCAWP8R $6.00





WAGON 72in WIDE (FORM TYPE) SCAWAGON $40.00 $120.00 $360.00



89


8" CASTOR WHEELS W 8" x 6" SPIGOT 12lbs SCA8CASR $5.00 $10.00 $15.00

24" SCREWJACK BASE PAD ADJUSTABLE 12" 9.8lbs

SCA2450BPR $5.00 $10.00 $15.00

24" SCREWJACK CASTOR HOLDERS 6.6lbs SCA245JCHR $5.00 $10.00 $15.00

24” SCREWJACK COMPLETE WITH 8” CASTOR SCA24SJCR $10.00 $20.00 $30.00

36" SCREWJACK BASE PAD 24" ADJUSTABLE 9.8lbs

SCA36SJBPR $5.00 $10.00 $15.00

36" SCREWJACK CASTOR HOLDER 24" ADJUSTABLE 8.5lbs

$5.00 $10.00 $15.00

BASE PAD 6" x 6" BASE 2lbs SCABPR $0.50 $2.00 $4.00

COUPLING PINS 1-3/8” DIAMETER 7" LONG 1 lbs SCACPR (NEW)

$0.50 $2.00 $4.00

TOGGLE PINS 12lbs / 100 PER SCATPR $0.50 $2.00 $4.00

OUTRIGGER 30" WIDE 14lbs $5.00 $20.00 $60.00

HANGING BRACKET 24" WIDE 10lbs SCAHBR $5.00 $20.00 $60.00

SAFETY RAILS

7ft SAFETY RAILSET 12 PIECES: 4x POSTS, 4x 7ft RAILS, 4x 5ft RAILS

12 PCS

SAFETY RAIL

$5.00 $20.00 $60.00

10ft SAFETY RAILSET 12 PIECES: 4x POSTS, 4x 10ft RAILS, 4x 5ft RAILS

SAFETY RAIL $6.00 $24.00 $72.00

INDIVIDUAL GUARD RAIL PIECES

GUARD RAIL POST $2.00 $4.00 $8.00

3ft GUARD RAIL SCA3GRR $1.50 $3.00 $6.00



10fT GUARD RAIL SCA10GRR $1.50 $3.00 $6.00

TUBE SCAFFOLD - TUBELOC TYPE

2" TUBES SCHEDULE 40, 1.90OD

20ft TUBELOC TUBES SCA20TLR $21.00



90










RIGHT ANGLE CLAMP SCARAR $2.00

SWIVEL CLAMP SCASWCR $2.00

TUBE / FRAME RIGHT ANGLE CLAMP SCARAR $2.00

TUBE / FRAME SWIVEL CLAMP SCA5WCR $2.00

BEAM CLAMP SCABEAMCLR $5.00

3ft LADDER SCALAD3R $6.00

5ft LADDER SCALAD5R $7.00

STARTER BRACKETS SCASTARTBKR $4.00

OUTSIDE JOINER SCAQJR $3.00

TUBELOC BASE PAD

SCATLBPR

$2.00

PORTABLE UTILITY SCAFFOLDING (BAKER TYPE)

X2 ENDS

UTILITY PORTABLE SCAFFOLDING SET 7 PIECES: 1x DECK, 2x FRAMES, 2x CASTERS, 2x BRACES

X2 CROSS BAR X1 DECK X4 WHEELS

$20.00 $60.00 $80.00

UTILITY END FRAME

$5.00 $10.00 $20.00

UTILITY BRACE $2.50 $5.00 $10.00

UTILTY DECK $5.00 $10.00 $30.00



91


UTILITY 5" CASTER

$5.00 $10.00 $15.00

TOE BOARDS 42” LONG

$5.00 $20.00 $60.00

TOE BOARD BRACKET

$3.00 $12.00 $36.00

SNOW CLEARING EQUIPMENT Description Hourly Daily Weekly 4 Weeks

HUSQVARNA BACKPAC BLOWER $50.00 $200.00 $400.00

SNAPPER SNOW THROWER $10.00 $40.00 $160.00

SINGLE STAGE 20” 3HP

SNAPPER SNOWBLOWER $20.00 $100.00 $300.00 $900.00

2-STAGE 26” 8HP - 32" 11HP

(MIN. 3HRS)

SEE ALSO LOADERS (SKID-STEER) OR TRACTORS



92

SNOWMOBILES, SLEIGHS, OUTBOARDS & ATV’S Description Hourly Daily Weekly 4 Weeks

SNOWMOBILE (MIN. 3 DAYS) $250.00 $1000.00 $2,700.00

DEPOSIT REQUIRED

POLARIS INDY LONG TRACK/WIDE TRACK 500CC LIQUID COOLED ELECT START REV HAND

WARMER, THUMB WARMER, SKID PLATE, BACKREST, STORAGE RACK W/ TALL SHIELD

AL

TRAPPER’S WOODEN SLEIGH

WITHOUT BOX $20.00 $75.00 $225.00

WITH BOX $30.00 $117.00 $350.00

SNOW SKIMMER (8 FT.) $30.00 $100.00 $300.00

STEEL OR ALUMINUM

WITH TIE DOWN RAILS

WITH BARREL RACK $40.00 $120.00 $360.00

ATV ARGO 8X8 $400.00

ATV ARGO 8X8 W/TRACKS $550.00

RTV 900 - KUBOTA $250.00 $1,000.00 $2,700.00

RTV 1100 - KUBOTA $300.00 $1,500.00 $3,500.00

RTV 1140 4 SECTOR – NO CAB $275.00 $1,400.00 $3,250.00

OUTBOARD MOTOR

JOHNSON/EVINRUDE 9.9 HP SHORT SHAFT $50.00 $200.00 $600.00

EVINRUDE 15HP LONG SHAFT $50.00 $200.00 $600.00

EVINRUDE 25HP LONG SHAFT $60.00 $240.00 $720.00

TRAILER - SNOWMOBILE $75.00 $300.00 $900.00

2 POSITION

ALL DAMAGE, INSURANCE & TIRES ARE THE RESPONSIBILITY OF THE RENTER



93

SNOWMOBILES, SLEIGHS, OUTBOARDS & ATV’S Description Hourly Daily Weekly 4 Weeks

TRAILER - UTILITY $75.00 $300.00 $900.00

TANDEM, 2 x 3500LBS AXLES, 7000LBS CAPACITY 16 FT

TRAILER - UTILITY $75.00 $300.00 $900.00

TANDEM 2 x 7000LBS AXLES, 14000LBS CAPACITY 20 FT

TRAILER - ARGO ATV TUB $50.00 $200.00 $600.00

TRAILER - WELDER/GENERATOR $20.00 $40.00 $100.00

HITCH - PINTLE OR BALL $5.00 $20.00 $60.00

VAN - 45 FT TOOL CRIB/COFFEE ROOM $500.00 $1,500.00 $2,500.00

C/W LIGHTING, POWER HOOK-UP, FURNACE

8X8X20 C-CAN $150.00 $500.00 $900.00

ALL DAMAGE, INSURANCE & TIRES ARE THE RESPONSIBILITY OF THE RENTER



94

STAPLERS AND NAILERS Description Hourly Daily Weekly 4 Weeks

T-50 STAPLER 1/4” X 3/4” $6.00 $30.00 $60.00

ET-50 ELECTRIC ARROW STAPLER $10.00 $30.00 $60.00

3/8”, 1/2” OR 9/16”

PA-200-516 PASLODE 1 1/8” 1/2” CROWN $30.00 $85.00 $250.00

3/4 - 2 1/2

3150/38-N18 1/2” - 1 1/2” 3/16” CROWN $30.00 $85.00 $250.00

MU-212-F PASLODE MUSTANG $30.00 $85.00 $250.00

FINISH NAILER

3/4” - 2 1/2”

MU-114-W16R PASLODE MUSTANG $30.00 $85.00 $250.00

ROOFING STAPLER

5/8 - 1 1/2” 1” CROWN

SK312 PASLODE CONSTRUCTION NAILER $30.00 $85.00 $250.00

2” - 4” (SPIKER)

D-60 RAMSET POWDER ACTUATED $35.00 $85.00 $255.00

PERCUSSION TOOL

YELLOW SHOT ONLY

RAMSET D45A POWER

FASTENER RED & YELLOW

MIFFS BOSTITCH FLOORING STAPLER $35.00 $105.00 $315.00

HARDWOOD FLOOR

S32 BOSTITCH LAMINATE FLOOR NAILER $30.00 $85.00 $250.00

IM250 PASLODE IMPULSE NAILER, (BRAD NAILER), ANGLED 16GN

$35.00 $85.00 $255.00

PAM SHARPSHOOTER $35.00 $105.00 $315.00

FLOOR SCREW GUN

PASLODE 3175*44 RC4 ROOFING NAILER $35.00 $105.00 $315.00

PASLODE CORDLESS SPIKER $40.00 $120.00 $360.00

GRAIN FLOOR STAPLER #625 $20.00 $60.00 $80.00

* NOTE* STAPLES AND NAILS AVAILABLE



95

STRAPPING & BINDING Description Hourly Daily Weekly 4 Weeks

STRAPPING DISPENSER $20.00 $60.00 $180.00

C/W CART, BAND CUTTING PLIER,

BAND TENSIONER, BAND CRIMPER

AIRCRAFT CABLE CRIMPERS $10.00 $40.00 $120.00

GROTE BATTERY CABLE CRIMPERS $15.00 $60.00 $180.00

P-1 PUNCH LOCK TOOL $10.00 $40.00 $120.00

CLIPS .10/EA

BAND $4.85/LB

TOOL BOXES / CARRY CASES / SEACAN Description Hourly Daily Weekly 4 Weeks

CHAINSAW CARY CASE $5.00 $10.00 $20.00

PELICAN CARRY CASE 24”L x 19”W x 13”D MODEL 1640 FOR HUSQVARNA, POWER HEAD, DRUM DEHEADER, HILTI DD130

$10.00 $30.00 $60.00

SEACAN 8’ x 8’ x 20” $200.00 $250.00 $600.00



96

TRAILER RENTAL RATES Description Hourly Daily Weekly 4 Weeks

SNOWMOBILE TRAILER (2” BALL) $75.00 $300.00 $900.00

16FT TANDEM (7,000 LBS) CAR HAULER TRAILER (2 – 3500 LBS AXLES) 2-5/16” BALL HITCH

$150.00 $600.00

$1,800.00

20FT TANDEM (14,000 LBS) EQUIPMENT TRAILER (2 – 7000 LBS AXLES) C/W RAMPS 2-5/16” HITCH

$150.00

$600.00

$1,8,00.00

20FT (6.000 LBS) HIGH BOY 2 – 3500LBS AXLES

$150.00 $600.00 $1,800.00

20FT TANDEM (14,000 LBS) TILT EQUIP. TRAILER 2-5/16” BALL HITCH (2 – 7000 LBS AXLES)

$150.00

$600.00

$1,800.00

GOOSENECK TRAILER – C/W RAMPS 30FT TRIAXLE (25FT 24,000 LBS TRIAXLE HIGH BOY TRAILER)

$150.00

$600.00

$1,800.00

7FT X 12-14FT DUMP TRAILER (HYD) (14,000 LBS) 2-5/16” BALL HITCH

$150.00 $600.00 $1,800.00

24FT 7000LBS TANDEM TRAILER $150.00

$600.00

$1,800.00

350LBS WELDER/PUMP TRAILER 2WHEEL DOT

$20.00 $40.00 $100.00

HITCH RECIEVER 3-WAY COMB/ PINTLE $5.00 $10.00 $20.00

AIRTOW TRAILER $150.00 $600.00 $1,800.00

**NOTE: TIRE REPAIRS EXTRA - ALWAYS INSPECT TIRES**

TRACTORS Description Hourly Daily Weekly 4 Weeks

KUBOTA 2620-2920, 26-29 HP, 4 x 4 TRACTOR $300.00 $835.00 $2,500.00

KUBOTA B3030 22HP 4 x 4 TRACTOR $400.00 $1,200.00 $3,600.00

C/W CAB

SNOWBLOWER FOR ABOVE TRACTORS 62" $250.00 $750.00 $2,250.00

B2782

KUBOTA M110GXDTCC C/W LOADER ARM NO LOADER ARM

$1,500.00

$1,200.00

$4,000.00

$3,500.00

$10,500.00

$9,500.00 MOWER SCHULTE XH1500S3 $750.00 $1,500.00 $3,800.00



97

WELDING, TORCHES AND CUTTING OUTFITS Description Hourly Daily Weekly 4 Weeks

SEELY 2070-2001FCP PLASTIC WELD KIT W/COMPRESSOR

$50.00 $150.00 $450.00

PLASTIC IS EXTRA

BROKEN ELEMENTS TO BE CHARGED TO CUSTOMER

OXYGEN/ACETYLENE WELD/CUTTING OUTFIT C/W TANKS, GAS EXTRA

$45.00 $135.00 $270.00

PORTABLE OXY. / ACET. OUTFIT $45.00 $105.00 $315.00

C/W TANKS - GAS EXTRA

MINI KIT

1/4" x 50FT OXY/ACC HOSE EXTENSION $7.00 $14.00 $28.00

1/4" x 100FT OXY/ACC HOSE EXTENSION $10.00 $20.00 $50.00

CYLINDER CART DOUBLE BIG BOTTLE $18.00 $35.00 $80.00

MED BOTTLE CART $10.00 $30.00 $60.00

PRESTOLITE TORCH OUTFIT $20.00 $80.00 $240.00

C/W TANK - GAS EXTRA

PROPANE TORCH $12.00 $48.00 $144.00

TIGER TORCH FLAME THROWER $12.00 $48.00 $144.00

C/W HOSE AND REGULATOR

LEAD MELTING POT $12.00 $48.00 $144.00

ARC WELDER (BUZZBOX) $25.00 $75.00 $225.00

LINDE 225 AMP (ELECTRIC)

RECTIFIER 450 AMP ELECTRIC WELDER SPECIFY VOLTAGE 220V - 575V

$95.00 $185.00 $350.00

RECTIFIER WELDER CART $8.00 $16.00 $28.00

ARC WELDER MOSA MSG201/MPM165 $50.00 $200.00 $600.00

150 AMP PORTABLE (GAS) DC WELDER

A/C 110V 2000 WATT C/W ACCESSORIES

75LBS

ARC WELDER MOSA MPM200 $75.00 $300.00 $900.00

200 AMP DC WELDER HONDA GAS

C/W 10’ STINGER & 10’ GROUND



98


WELDER - 300AMP LINCOLN (DIESEL) $125.00 $500.00 $1,400.00

C/W 2-50’ EXT LEAD

1-10’ GROUND CABLE

1-10’ STINGER

TRAILER FOR ABOVE $20.00 $40.00 $100.00

MILLER BIG BLUE 402 400 AMP (DIESEL) $150.00 $555.00 $1,355.00

C/W:

1 – 10’ GROUND CABLE

1 - 10' STINGER CABLE

2 - 50' EXTENSION CABLE

TRAILER FOR ABOVE $20.00 $40.00 $100.00

PIPE STAND V-TOP ADJUSTIBLE ROLLER HEAD FOR PIPE STAND

$15.00 $5.00

$40.00 $10.00

$70.00 $25.00

10' WHIP STINGER OR GROUND $5.00 $15.00 $25.00

50’ X 2/0 WELD CABLE $7.00 $21.00 $40.00

100’X2/0 WELD CABLE $10.00 $30.00 $60.00

REMOTE CONTROL W/100’ CABLE $8.00 $21.00 $52.50

3-PRONG LINCOLN TYPE

REMOTE EXT CABLE 100’ $10.00 $20.00 $40.00

3-PRONG LINCOLN TYPE

MILLER 14-PIN DIAL REMOTE 25FT $8.00 $21.00 $52.50

MILLER 14-PIN EXTENSION 50FT $5.85 $10.50 $18.65

MILLER 14-PIN EXTENSION 75FT $14.00 $26.85 $49.00

WELDING HELMET $5.00 $20.00 $60.00

ROD OVEN 10LB, 110V $20.00 $40.00 $60.00

ROD OVEN 150LBS, 110V $25.00 $60.00 $200.00

LINCOLN 170A 220V MIG WELDER $80.00 $240.00 $720.00

GAS EXTRA

LINCOLN POWER MIG 300 MIG WELDER $125.00 $500.00 $1,500.00

230-575 V

GAS EXTRA



99


LINCOLN LN-25 PORTABLE SUITCASE WELDER $66.00 $190.00 $435.00

REQUIRES KP653-052 DRIVE ROLL KIT

REQUIRES MAGNUM 300 GUN & 15FT CABLE

PLASMA ARC CUTTER C/W 3/4" TORCH $120.00 $480.00 $1,320.00

SPARE PARTS KIT AVAILABLE

AIR ARC GAUGER $20.00 $50.00 $100.00

ARGON FLOWMETER $20.00 $50.00 $105.00

WELDING HELMET $5.00 $20.00 $40.00

PLASMA CUTTER LINCOLN TOMAHAWK 375 MILLER SPECTRUM UP TO ½”

$75.00 $250.00 $650.00

PLASMA CUTTER LINCOLN TOMAHAWK 625 MILLER SPECTRUM 250 UP TO ¾”

$135.00 $550.00 $1,600.00

OXYGEN - 2200/BOTTLE

LGE. BOTTLE - $150.00

SM. BOTTLE - $75.00

$0.10 / LB. APPROX

MIN. CHARGE $10.00

ACETYLENE – 250/BOTTLE

LGE BOTTLE - $640.00

SM BOTTLE - $320.00

$0.15 / LB APPROX

MIN CHG $10.00

PROPANE TANK 20LBS $5.00 $20.00 $50.00

TANK $42.00

1/2 TANK $25.00

MIN. $12.00

WEIGHT OF EMPTY BOTTLE = 17LBS WEIGHT OF FULL BOTTLE = 37LBS



100


PROPANE TANK 30LBS $5.00 $20.00 $50.00

TANK $63.00

1/2 TANK $40.00

MIN. $20.00


PROPANE TANK 40LBS

TANK $82.50

1/2 TANK $50.00

MIN. $25.00


ron’s auto service ltd. · heavy dust in summer or in a batch plant environment, equipment (i.e....

Documents