rolled steel motors - north american electric · 2017-03-27 · rolled steel motors premium...

“Your Source for a Complete Line of Electric Motors”

RolledSteelMotors

A Complete Line of Single Phase andThree Phase Rolled Steel Motors

Toll Free: 800-884-0404 • www.naemotors.com • e-mail: [email protected]

Mission Statement

Company History

WARRANTY POLICY

To provide the United States market for industrial motors and controls with products which meet orexceed customer expectations for quality, performance, and reliability at the lowest possible cost anddelivered in accordance with the customer’s schedule, through our authorized distributor network.

North American Electric, Inc. is a wholesale supplier of Special Purpose and General Purpose, AC electricmotors and controls. We take pride in supplying high performance, high quality products at extremelycompetitive prices throughout the United States. Donald E. Hackman, Sr. and David E. Hackman foundedthe company in October of 1993. The company’s primary focus is sourcing quality electric motors fromvarious manufacturers, both locally and internationally, and distributing them throughout the UnitedStates through local distributors and service centers. Our nationwide distributor and service networkoffer strong local support for our products by providing critical logistical, technical and maintenancesupport as well as fast, friendly customer service.

All motors sold by North American Electric, Inc. are warranted to be free from defects in material andworkmanship. The warranty is 24 months from the date of manufacture but no less than 18 months fromdate of invoice. Also, all motors installed within 24 months from date of manufacture will be warrantedfor no less than 12 months from the date the motor is installed. North American Electric, Inc. shall, at itsoption and expense, either repair or replace any such motor or part, which is defective within the war-ranty period. To be covered under warranty, any motor must have at all times been operated or usedunder normal operating conditions for which the motor was designed.In the event of warranty claims, North American Electric, Inc. must be notified promptly following any

motor failure. The motor should be sent to a North American Electric, Inc. authorized service center todiagnose the cause of failure. After this examination, a determination will be made if the failure was dueto defective material and/or workmanship. If the failure was due to defective material and/or workman-ship, North American Electric, Inc. will replace or repair the motor.North American Electric’s liability under this warranty or any other warranty whether expressed or

implied in law or fact shall be limited to the repair or replacement of defective material and workmanship,and in no event shall North American Electric, Inc. be liable for consequential or indirect damages,including freight.

YYOOUURR SSOOUURRCCEE FFOORR AA CCOOMMPPLLEETTEE LLIINNEE OOFFEELLEECCTTRRIICC MMOOTTOORRSS !!!!!!

1

SINGLE PHASE, 56C FRAME, TEFC

11//33––22 HHPP 22,,44 PPOOLLEE

HHIIGGHH SSTTAARRTTIINNGG TTOORRQQUUEESS MMAANNUUAALLOOVVEERRLLOOAADD PPRROOTTEECCTTIIOONN ((OOPPTTIIOONNAALL))

CCAAPPAACCIITTOORR SSTTAARRTT // CCAAPPAACCIITTOORR RRUUNN DDEESSIIGGNN

RROOLLLLEEDD SSTTEEEELL FFRRAAMMEE CCOONNSSTTRRUUCCTTIIOONN IIPP5555PPRROOTTEECCTTIIOONN--RREEMMOOVVAABBLLEE FFEEEETT

SINGLE PHASE OPEN DRIPPROOF

33,,55 HHPP 44 PPOOLLEE

HHIIGGHH SSTTAARRTTIINNGG TTOORRQQUUEESS


RROOLLLLEEDD SSTTEEEELL FFRRAAMMEE CCOONNSSTTRRUUCCTTIIOONN CCAASSTTIIRROONN EENNDDBBEELLLLSS

SINGLE PHASE, FARM DUTY, TEFC

11//33––1100 HHPP 44 PPOOLLEE

HHIIGGHH SSTTAARRTTIINNGG TTOORRQQUUEESS MMAANNUUAALLOOVVEERRLLOOAADD PPRROOTTEECCTTIIOONN ((11//33 TTHHRRUU 55 HHPP))


RROOLLLLEEDD SSTTEEEELL FFRRAAMMEESS CCAASSTT IIRROONN EENNDDBBEELLLLSS

THREE PHASE, 56C FRAME, TEFC11//33––33 HHPP 22,,44 PPOOLLEE

HHIIGGHH EEFFFFIICCIIEENNCCYY DDEESSIIGGNN GGEENNEERRAALLPPUURRPPOOSSEE MMOOTTOORRSS

RROOLLLLEEDD SSTTEEEELL FFRRAAMMEE CCOONNSSTTRRUUCCTTIIOONN,,AALLUUMMIINNUUMM EENNDDBBEELLLLSS

IIPP5555 PPRROOTTEECCTTIIOONN RREEMMOOVVAABBLLEE FFEEEETT

THREE PHASE OPEN DRIPPROOF

11––1155 HHPP 22,,44 PPOOLLEE

PPRREEMMIIUUMM EEFFFFIICCIIEENNCCYY DDEESSIIGGNN GGEENNEERRAALLPPUURRPPOOSSEE MMOOTTOORRSS

RROOLLLLEEDD SSTTEEEELL FFRRAAMMEE CCOONNSSTTRRUUCCTTIIOONN,,CCAASSTT IIRROONN EENNDDBBEELLLLSS

PREMIUM CRUSHER DESIGN MOTORS11––550000 HHPP 44,,66,,88 PPOOLLEE

NNEEMMAA DDEESSIIGGNN CC HHIIGGHH SSTTRREENNGGTTHH 44114400 GGRRAADDEESSTTAAIINNLLEESSSS SSTTEEEELL SSHHAAFFTT

558866//77UU FFRRAAMMEE HHEEAAVVYY DDUUTTYY CCAASSTT IIRROONNCCOONNSSTTRRUUCCTTIIOONN ((IINNCCLLUUDDIINNGG FFAANN CCOOVVEERR))

BBEEAARRIINNGG SSIIZZEESS:: DDEE==NNUU332244 OODDEE==66332244

PREMIUM EFFICIENCYALUMINUM MOTORS

11––1100 HHPP 22,,44 PPOOLLEE

HHIIGGHH EEFFFFIICCIIEENNCCYY DDEESSIIGGNN GGEENNEERRAALL PPUURRPPOOSSEE,,TTHHRREEEE PPHHAASSEE,, TTEEFFCC MMOOTTOORRSS

LLIIGGHHTT WWEEIIGGHHTT AALLUUMMIINNUUMM FFRRAAMMEE

OIL WELL PUMP MOTORS, TEFC

33––115500 HHPP 66 PPOOLLEE

NNEEMMAA DDEESSIIGGNN DD HHIIGGHH SSLLIIPP((55%% TTOO 88%% SSLLIIPP)) SSPPEECCIIAALLPPUURRPPOOSSEE OOIILL WWEELLLL PPUUMMPP MMOOTTOORRSS

HHEEAAVVYY DDUUTTYY CCAASSTT IIRROONN FFRRAAMMEE CCOONNSSTTRRUUCCTTIIOONN

VERTICAL HOLLOW SHAFTPUMP MOTORS

1100 HHPP –– 225500 HHPP,, 44 PPOOLLEEHHIIGGHH TTOORRQQUUEE -- HHIIGGHH TTHHRRUUSSTT

MOTOR SLIDE BASES

AAVVAAIILLAABBLLEE 5566CC TTHHRRUU 550055UU

THREE PHASE, TEFC ROLLED STEEL MOTORS

PPRREEMMIIUUMM EEFFFFIICCIIEENNCCYY DDEESSIIGGNN--GGEENNEERRAALL PPUURRPPOOSSEE,,

LLIIGGHHTT WWEEIIGGHHTT RROOLLLLEEDD SSTTEEEELL FFRRAAMMEE

ELECTRIC MOTOR CONTROL

FFUULLLL VVOOLLTTAAGGEE SSTTAARRTTEERRSS

SSOOFFTT SSTTAARRTTSS

IINNVVEERRTTEERRSS

PPUUMMPP PPAACCKKAAGGEESSSTAINLESS STEEL

WASHDOWN DUTY MOTORS

11//33 HHPP -- 2200HHPP 22,,44,,66 PPOOLLEE

IIPP 6677 PPRROOTTEECCTTIIOONN

IINNVVEERRTTEERR DDUUTTYY

NEMA PREMIUM EFFICIENCYINVERTER DUTY MOTORS

MMEEEETTSS OORR EEXXCCEEEEDDSS NNEEMMAA PPRREEMMIIUUMMEEFFFFIICCIIEENNCCYY LLEEVVEELLSS QQUUAALLIIFFIIEESS FFOORREENNEERRGGYY EEFFFFIICCIIEENNCCYY RREEBBAATTEESS

PREMIUM EFFICIENCYEXPLOSION PROOF MOTORS

11––330000 HHPP 22,,44,,66 PPOOLLEEAALLLL MMOOTTOORRSS MMEEEETT OORR EEXXCCEEEEDD UULL 667744 SSPPEECCIIFFIICCAATTIIOONNAASS RREEQQUUIIRREEDD BBYY OOSSHHAA FFOORR IINNSSTTAALLLLAATTIIOONN AANNDD UUSSEE

IINN HHAAZZAARRDDOOUUSS LLOOCCAATTIIOONNSS..CCLLAASSSS II,, DDIIVVIISSIIOONN II,, GGRROOUUPPSS CC&&DD AANNDDCCLLAASSSS IIII,, DDIIVVIISSIIOONN II,, GGRROOUUPPSS EE,,FF AANNDD GG

UULL CCEERRTTIIFFIIEEDD -- FFIILLEE EE222288665544CCSSAA ++ ““CC”” ++ ““UUSS”” -- CCAANNAADDIIAANN SSTTAANNDDAARRDD

IISSOO99000011


SINGLE PHASE, TEFC, 56C FRAME

• 1/3-2 Horse Power• 1800 and 3600 RPM• C-Flange with Removable Feet

Heavy (9) Gauge RolledSteel Construction

High Starting Torque

NEMA Design B

Class F InsulationSystem with Class HVPI Epoxy ResinProtection

Double PunchedFoot Design

C-Flange withRemovable Feet

Totally EnclosedFan CooledProtection

APPLICATIONS:General Purpose Use on Pumps, Fans, Blowers, Compressors,Conveyors, Farm Equipment and Other Industrial CommercialMachinery Installed in Damp, Dusty or Dirty Environments. IP55as Standard. Suitable for Indoor and Outdoor Applications.These Motors have High Starting Torques and are Well Suited forApplications with High Starting Loads.

2 Toll Free: 800-884-0404 • www.naemotors.com • e-mail: [email protected]

“Buy on Value Not on Price”

IP55Protection

Internal Oil Seal onDrive End

SINGLE PHASE, 56C FRAME LIST PRICING

TECHNICAL DATA

3Toll Free: 800-884-0404 • www.naemotors.com • e-mail: [email protected]

*Refer to page 17 for mounting dimensions

Note: Also available with Manual Overload Protection. Please see Farm Duty Motors on .

4

FARM DUTY MOTORS

• 1/3 - 10 Horse Power• 1800 RPM• Manual Overload Protectionthrough 5HP

Heavy (9) GaugeRolled SteelConstruction

High Starting Torques

NEMA Design B

Class F InsulationSystem with ClassH VPI Epoxy ResinProtection

Double Punched Foot Design

C-Flange KitAvailable

Totally EnclosedFan Cooled (TEFC)Protection

Manual OverloadProtection Through5 HP

APPLICATIONS:General Purpose Use on Pumps, Fans, Conveyors, PoultryEquipment, Air Compressors and Other Farm Duty MachineryRequiring High Starting Torques.



IP55Protection


Toll Free: 800-884-0404 • www.naemotors.com • e-mail: [email protected] 5

FARM DUTY MOTORS LIST PRICING

TECHNICAL DATA

C FLANGE LIST PRICING

*Refer to pages 17 & 18 for mounting dimensions

SINGLE PHASE OPEN DRIPPROOF

• 3-5 Horse Power• 1800 RPM• Compressor Duty

High Efficiency Design

NEMA Design B

Oversized BearingUsed on Both DriveEnd and OppositeDrive End

Class F Insulation Systemwith Class H VPI EpoxyResin Protection


APPLICATIONS:General Purpose Use on Pumps, Fans, Conveyors, Blowers, AirCompressors, Refrigeration Equipment, Industrial Equipment,Milling Machines, Tools, Farm Equipment, Aeration Equipmentand Other General Purpose Applications Where Contaminantsare Minimal. These Motors have Extremely High StartingTorques for use on Applications with High Starting Loads.



Sealed Bearings

HighStartingTorques

Open DripproofIP23 Protection


7Toll Free: 800-884-0404 • www.naemotors.com • e-mail: [email protected] 7

SINGLE PHASE OPEN DRIPPROOF MOTORSLIST PRICING

TECHNICAL DATA


180T 3180-SODP $65 12



THREE PHASE, TEFC, 56C FRAME

• 1/3-3 Horse Power• 1800 and 3600 RPM• C-Flange with Removable Feet

Inverter Rated10:1VT; 5:CT High Starting Torque

NEMA Design B

Class F InsulationSystems with ClassH VPI Epoxy Resin

C-Flange withRemovable Feet



APPLICATIONS:General Purpose Use on Pumps, Fans, Blowers, Compressors,Farm Equipment and Other Industrial and CommercialMachinery Installed in Damp, Dusty or Dirty Environments.IP55 Protection as Standard. Suitable for Indoor and OutdoorApplications. Additionally, These Motors do Utilize PhaseInsulation Materials That are Suitable for use with VariableFrequency Drives.



IP55Protection



THREE PHASE, TEFC, 56C FRAMELIST PRICING

TECHNICAL DATA



THREE PHASE, TEFC,INTEGRAL HORSE POWER

• 1-10 Horse Power• 1800 and 3600 RPM• Inverter Rated

Inverter Rated10:1 Variable Torque5:1 Constant Torque

High Starting Torque

NEMA Design B

Class F InsulationSystems with ClassH VPI Epoxy Resin.

C-Flange KitsAvailable



APPLICATIONS:General Purpose Use on Pumps, Fans, Blowers, Compressors,Conveyors, Material Handling and Other Industrial MachineryInstalled in Damp, Dusty or Dirty Environments. Additionally,These Motors are Suitable for use with Variable FrequencyDrives.



IP55Protection



THREE PHASE, TEFC,INTEGRAL HORSEPOWER

LIST PRICING

TECHNICAL DATAHP Full load Frame Service DE ODE LRA Full load FLT Ft-Lb LRT % BDT % Full Load % Full Load % Weight

RPM Factor Bearing Bearing At 460V At 460V Efficiency Power Factor


140T 180T 210T

3140-RSTE3180-RSTE3210-RSTE

$34$65$69

101215



THREE PHASE,OPEN DRIPPROOF MOTORS

• 1-15 Horse Power• 1800 and 3600 RPM• Inverter Rated

AC Inverter Rated10:1 Variable Torque5:1 Constant Torque

High Efficiency Design

NEMA Design B

Oversized BearingsUsed on Both DriveEnd and OppositeDrive End

Class F InsulationSystem with Class HVPI Epoxy Resin

Open DripproofIP23 Protection


APPLICATIONS:General Purpose Use on Pumps, Fans, Blowers, Compressors,Material Handling and Other General Purpose ApplicationsWhere Contaminants are Minimal.


High StartingTorques

Sealed Bearings



THREE PHASE, OPEN DRIPPROOFLIST PRICING

TECHNICAL DATA

HP Full load Frame Service DE ODE LRA Full load FLT Ft-Lb LRT % BDT % Full Load % Full Load % WeightRPM Factor Bearing Bearing At 460V At 460V Efficiency Power Factor



MOTOR SLIDE BASES

FEATURES:• Bases are provided with washers• Primed with Oven-Baked Primer for easy painting• All “D” bolts (or Motor mounting bolts) are welded into positionto prevent spinning and dropping from the slots

• All “D” bolts are fixed to the exact foot pattern of the motor toaid in easier motor installation

• All sizes are double-adjusting screw type


MOTOR SLIDE BASE DIMENSIONS56 – 286T


MOTOR SLIDE BASE DIMENSIONS324T – 505U FRAME

17

Single Phase TEFC Foot Mount

56 Frame – 145T Frame

Toll Free: 800-884-0404 • www.naemotors.com • e-m

ail: sales@

naem

otors.com

Single Phase TEFC C-Flange Mount

56C – 145TC Frame

18

Single Phase TEFC Foot Mount

182T – 215T Frame

Single Phase TEFC C-Flange Mount

182TC – 215TC Frame


ail: sales@

naem

otors.com

19

Single Phase Open Dripproof

182T – 184T Frame

C-Flange Single Phase Open Dripproof

182TC – 184TC Frame


ail: sales@

naem

otors.com

20

Three Phase TEFC

56 – 215T Frame

C-Flange Three Phase TEFC

56C – 215TC Frame


ail: sales@

naem

otors.com

Three Phase Open Dripproof

143T – 215T Frame

C-Flange Three Phase Open Dripproof

143C – 215TC Frame


ail: sales@

naem

otors.com

21

Distributed by:

North American Electric, Inc. P.O. Drawer 130 350 Vaiden Drive Hernando, MS 38632Toll Free: 800-884-0404 Phone: 662-429-8049 Fax: 662-429-8546 Sales: 800-884-0405

www.naemotors.com e-mail: [email protected]

Data subject to change without notice

Revised April 2011

rolled steel motors - north american electric · 2017-03-27 · rolled steel motors premium...

Documents