roky plast sal wadi b l lebanon roky plast...
TRANSCRIPT
Plan web
What is a water stop
Waterstop is a specially
formulated polyvinyl chloride
(PVC) compound manufactured
from raw materials that fulfill all
properties.
The material is tough, flexible,
resilient, chemically inert, is not
affected by weathering, low
temperatures, or constant
immersion in water. It will
withstand rough treatment during
installation, yet, is relatively easy
to install and splice.
About Us
We are a company specialized in plastic Raw
Material, Recycle and water stop
Contact Us
mobile : +961-3634400Phone: +961-9795666
fax : +9619796556
Email: [email protected]
Web: www.rokyplast.com
Scared of a little expense? A
small leak will sink a great ship
(B.F)
ROKY PLAST SAL Wadi
al-Lahamin
Blat Jbeil lebanon ROKY PLAST SAL
Water stop
Uses of waterstop
Waterstop is designed for use inany concrete structure whichcontains joints and is subjected to ahydrostatic load on one face of thestructure.
Waterstop prevents watermovement through concrete joints in water reservoirs, locks, canals, andsewage treatment plants, bridges,stadiums, Basements, floor slabs,parking, Garages and similarstructures.
Colors
blue, grey or any other color upon request
measurements
Technical data :
Property Required Limits
Hardness, Shore A ± 3 75
Specific Gravity ± 2% 1.44
Tensile Strength ± 2% .14 MPa
Elongation at Break ± 2% 275%
Water absorption ± 2% max 0.15%
center bulb
Waterstops are available in 2 types:
Plain Web waterstops: use inConstruction & Contraction joints
Center Bulb waterstops: use inContraction & Expansion joints
The centrally placed waterstop gives a guarantee against water leaks. Centrally placed waterstops are mainly suitable for use in water retaining and water excluding structures, having the capabilities of holding out against water pressure from both internal and external face.
They are also specifically designed for water retaining structures, for walls and slabs where a difference of pressure may occur such as "reservoir walls ". They equally suit for joints in suspended slabs, ground floor slabs, vertical and lift joints.
Length and color could be changed upon request
Product Technical Data Sheet (TDS)
Material: INTERNAL & EXTERNAL WATERSTOP
Composition: Mixture of PVC, Stabilizers, Plasticizers, Fillers, Lubricants and Additives.
Usage Used as PVC Sealing Structure Joints.
Color: Blue & Grey.
PHYSICAL - MECHANICAL - ELECTRICAL PROPERTIES
Property Test Method Unit Typical Value
Density ISO 1183 Gr/cc (± 2%) 1.44
Hardness Shore A ISO 868 Shore A (± 2%) 75
Tensile strength ISO 527 N/mm2 ≥ 14
Elongation at break ISO 527 % (± 2%) ≥ 275
Volume resistivity 23°C ASTM D 275 Ω.cm ≥ 1012
Thermal stability@200C CEI 20-34/3-2 Minutes (± 5%) 70
Max. Water Absorption 24 hrs ASTM D570/1981 % ≤ 0.15
The typical values reported in the table have been obtained from measurements made on extruded samples or pressed plates
Working conditions for Extrusion: Any good extruder designed for PVC may suitable for this type extrusion provided that it is
equipped with convenient heat and screw having a good homogenizing capacity.
Recommended Extrusion temperature
ZONE 1 ZONE 2 ZONE 3 ZONE 4 HEAD DIE
150 °C 155 °C 160 °C 165 °C 170 °C 175 °C
Packing
The product is packed in multiply polypropylene bags of 25 kg/bag on pallet shrink foiled with polyethylene or polypropylene bags of
1,000 kg/bag or more.
Storage
The product must be stored in ambient temperature, keep containers dry and tightly closed to avoid moisture absorption and
contamination.
__ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __
ROKY PLAST S.A.L. Wadi Al Lahamin, 26135 Blat, Jbeil, LEBANON - Tel: +961 9 795 666, Fax: +961 9 796 556, Mobile: +961 3 634 400
Email: [email protected], www.rokyplast.com, Capital: L.L. 30 000 000 fully Paid, C.R. No.: 2024584, VAT No.: 2480014-601