rodi systems corp. corporate overview and capabilities rodi systems corp. 936 hwy 516 aztec, nm...
TRANSCRIPT
RODI Systems Corp.Corporate Overview and
Capabilities
RODI Systems Corp.936 Hwy 516
Aztec, NM 87410505-334-5865
RODI Systems Overview
Privately Owned New Mexico Corporation
Founded in 1995 Located in NW New
Mexico Specializes in High
Performance Water Treatment
RODI Systems History
Founded in January 1995 as Reverse Osmosis (RO) Consulting Firm
Began Design and Construction of RO Systems in Mid-1995
Now Offers Vapor Compression Evaporation and Ultrafiltration in Addition to RO
Also Offers Complete Line of Monitoring and Control Products
RO Consulting
RO Systems
UF and MF Systems
Portable Systems
Instruments and Controls
Water Treatment Applications
Domestic and Industrial Wastewater
Oil and Gas Produced Water
Desalination Drinking Water Process Water
Clients and Locations
Partial Client List SeaWorld of
Florida U.S. Navy Siemens GE Nalco Sandia National
Laboratory Intel Anheuser-Busch
Project Locations United States Canada Egypt Libya Turkey Grand Cayman U.S. Virgin
Islands Mexico
Water Treatment Technologies
Reverse Osmosis Ultrafiltration Microfiltration Membrane
Bioreactors Evaporation Conventional
Ref: Norit
Advantages of Membrane-Based Water Treatment
Systems
Superior Product/Effluent Quality – Membranes Provide an Absolute Barrier
Smaller Space Requirement Easier to Automate and Monitor In Many Cases, Such as Wastewater,
the Only Option for High Performance Treatment
Advantages of Mobile and Containerized Systems
Less Expensive than Site-Built Systems
Fast Delivery Time
Portable Small Footprint
RODI’s Standard Water Treatment Products
PureBoxTM – Containerized Brackish Water and Seawater Desalination Systems
RODI TMX – Trailer-Mounted Water Purification Systems
RODI IMS – Integrated Membrane Systems for Wastewater Recycling
RODI CMBR – Containerized Wastewater Treatment Systems
PureBoxTM ContainerizedDesalination Systems
Portable — Completely self-contained in an intermodal shipping container.
Flexible — Systems may be added or changed easily.
Secure – Containerized construction prevents tampering.
Low Cost — Cost of ownership is one of the lowest in the industry due to its high energy efficiency and low cost of operation.
The entire treatment system is self-contained inside an intermodal shipping
container.
The PureBoxTM systems are constructed with industrial quality components.
RODI TMX Trailer-MountedWater Purification Systems
Long Shelf Life — Systems may be stored for years with little or no maintenance.
Durable — Designed for the rigors of use incorporating industrial quality components.
Effective – High performance treatment technologies.
Power Options — Available with genset and solar power supplies.
High performance treatment technologies ensure superior product
quality.
Automated controls ensure proper operation even if the system is
unattended.
RODI IMS WastewaterRecyling Systems
Utilizes high performance membrane technology to treat wastewater for reuse.
Ultrafiltration followed by reverse osmosis removes both suspended and dissolved contaminants.
Hot (<120 deg F) wastewaters may be treated and reused for energy savings.
Applications include wastewaters from textile dyeing, laundries, vehicle maintenance, metal finishing, etc.
The IMS (integrated membrane system) utilizes both tubular ultrafiltration and
reverse osmosis.
Complete automation and extensive system monitoring are standard features
of the IMS.
Reverse osmosis is used to removed dissolved solids thus allowing the final product to be reused without
additional treatment.
RODI CMBR ContainerizedWastewater Treatment Systems
Utilizes aerobic digestion followed by high performance membrane technology.
Small footprint and completely portable.
High quality effluent (< 5 ppm BOD and <1 ppm TSS) is suitable for reuse without additional treatment.
Applications include work camps, resorts, temporary housing, and pretreatment of industrial waste.
Entire system (including bioreactor tank) is mounted inside an intermodal
shipping container.
Major components are easily accessible. Insulation allows operation in cold climates.
Typical Features of RODI’s Water Treatment Systems
High Quality Controls and Instrumentation
Energy Recovery on Desalination Systems
Extensive Pretreatment Product Water Post-
treatment Remote Monitoring Membrane Cleaning
System Insulation and Climate
Control
Recent Custom Treatment System
Project Examples
2,000,000 GPD Brackish Water Containerized Reverse Osmosis Plant
2,400 GPD Containerized VCE Pilot System
The 2,000,000 GPD brackish water RO system is housed in four 40 ft intermodal containers.
Each container holds a 500,000 GPD RO train..
Each train is equipped with 150% of pump capacity.
Each train is equipped with an extensive instrumentation package for system
monitoring.
Each container is equipped with cartridge filtration pretreatment and a
clean-in-place (CIP) system.
This project involved installation of a 100 GPD VCE unit inside a 40 ft intermodal container. The
container was highly modified to facilitate operation and maintenance of the VCE unit.
The system is designed specifically for oil and gas produced water treatment. It is totally self-
contained and portable.
The system incorporates a natural gas fueled generator to provide on-site power.
The container is insulated and climate controlled with heating and cooling. The treatment system is fully
automated and capable of being remotely operated and controlled via the internet by means of a cellular gateway.
Control System Integration
Control System Design
System Construction
PLC and HMI Programming
Startup Assistance Technical Support
RODI Systems RO Monitoring and Control Products
AquaLynx® RO Controllers
RO Performance MonitorTM
EZ SDITM Silt Density Index Monitors
DataFlex RemoteTM
Technical Capabilities
Feasibility Studies Audits and
Troubleshooting of Existing Systems
Pilot Testing Treatment System
Design Mechanical Design
Including 3D CAD Control System and
Electrical Design Including Embedded Microprocessor, PLC, and PC Programming
System Startup Operator Training
Manufacturing Capabilities
Electrical – From Circuit Boards to Complete Control Systems
Treatment System Assembly Including Skid-Mounted and Containerized Systems
100% QA Testing UL 508 Certified
Why Choose RODI Systems?
Systems Designed from the Operator’s Standpoint – All RODI Designers Have Hands-On Experience in System Operation
In-House Capabilities for All Aspects of System Design Including Electrical, Controls, and Instrumentation
Knowledgeable Technical Support Including Startup and Operator Training
Specializes in High Performance Treatment Applications – Extensive Field Experience
Proven Track Record with Some of the World’s Largest Client Companies Including Anheuser-Busch, Siemens, Intel, And GE