rod building tools
TRANSCRIPT
PLASTIC MIXING CUPPMC
OX HAIR BRUSH – RO1/4 UTILITY KNIFE – PR2 STAINLESS STEEL SCALPEL – SC250
STAINLESS STEEL FORCEPS – PR325
STAINLESS SPATULA – ST250
ROD BUILDING TOOLS
$3.25PLASTIC BURNISHING TOOL – BT-1
$5.50
$4.50 each
$0.06 EACH
POWER CORK REAMER – RMP-SIZE
$20.00
ITEM NO. CAPACITYMIXER 0.5 OZ
MIXER-220V 0.5 OZ
RODSMITH EPOXY MIXERNo Bubbles - Mixes rod fi nish in 3 to 5 minutes.•
24 RPM - Reversible AC 120V Standard.•
Integrated On/Off switch on 6’ extension cord.•
Uses standard 2.5 oz. translucent souffl e cups.•
ITEM NO. DESCRIPTIONMIXER-ROD FINISH MIXER RODMIX-CUP-2.5PACK 2.5 OZ CUPS FOR MIXER (125 PACK)
MIXER SUPPLIES
Start out applying fi nish bubble-free, and get professional results.
Mixer $38.40 each Mix Cup $17.20 / 125 pcs Mixer-Rod $6.90 each
Glue StickOffers a strong bond with ahigher melting point.
Model #GS-5
$4.85 each
Available in 12 count packages.•
12PK-NYLBRSH
NYLON BRUSHES
$6.90 PER PACK
Tools & Supplies
Sizes most common rod blank tips from 3/64" to 28/64".
Tip sizing pegs for 3/64" to 28/64", great for measuring spares and confirming tube sizes.
Eliminate guesswork with the CRB-exclusive guide measuring area which allows builders to size spare or replacement guides in sizes 4mm to 30mm.
Features a handy ruler in both Standard and Metric for quick measurements. CRB-exclusive conversion chart imprinted on the back showing MM to 64ths conversion. Range from 3/64" (1.2mm) to 32/64" (12.7mm)
TIPTOP and GUIDE GAUGE (TTG-1) FRONT VIEW
REAR VIEW$8.95
(small, medium, large & extra large)
20" CUSTOM REAMERSHAND CORK REAMER – RMH-SIZE
17" HAND REAMERS
REAM-S (SMALL), REAM-M (MEDIUM), REAM-L (LARGE)
$10.55 EACH
SET OF THREE SIZES $30.00; REAM-SET
I
BB-1 $17.95Alcohol torch
Perfect for releasing bubbles in wrap finishUses denatured alcohol fuel
Reamer Abrasive (RA-25)This industrial abrasive is a 36 grit aluminum oxide on a heavy resin bonded cloth which is perfect for gluing to rod blanks to make extremely durable power reamers or hand reamers. 25 foot roll.
$43.75 EACH
Slip Clutch (SLCL-1)This slip clutch can be attached to any finishing motor with a ¼” shaft and enables you to stop the rod without stopping the motor during polymer application.This is essential for rod inspection and important touch ups with high speed motors of 60 to 200 rpm. It also makes coating guides with under-wraps a snap.
$31.00 EACH
DELUXE TOOL KIT (DTK-1)
This kit includes all the tools required for general rod building and creative feather inlays. The kit includes 1 each of: fine- point awl, fine-point forceps, reverse-action forceps, spatula, burnish tool, coarse scissors, fine-point spring scissors. The tools are packaged in a zippered case.
Tools & Supplies
$39.95
Barry Stokes with a nice Patagonian Rainbow
-
Solid aluminum base in three sectionsDeluxe Chuck - Dual Tensioner Thread Carriage
220V Model Available (RW-3XL/220V)
The original - solid aluminum baseStandard Chuck. - Dual Tensioner Thread Carriage
220V Model Available (RW-3L/220V)
Great for Wrapping Guides & Rod Repairs. Our hand wrappper includes dual tensioner spool
that won't fray metallic threads.
Wn. Power wrapper components in a hand wrapper configuratioseIncludes three rod supports, dual tensioner thread carriage, and two baset.sections joined by aligning brackem Upgradable to power wrapper with the purchase of power upgrade itey)RW-HW/PUG. (sold separatel
RW-3XL $590.95
RW-3L $437.65
RW-HW $198.75
RW-JR
$51.65
RW-HW-PUGPower upgrade for RW-HW• Solid aluminium 32” base• Includes pedal, deluxe chuck, and power assembly
RW-HW-PUG $390.00
AHWS-1 $68.75
Dual spool carriage with ball-bearing tension adjustment.Quick adjustment knobs for rod supports.Ultra smooth thread guide for free-travel.Spring rod allows you to stop a wrap and keep your thread under tension.
ITEM NO.RDM-4
RDM-4/220V
F 6 RPMFour 6 RPM motors.
Self-centering chucks with jaw hooks for rubber bands.
Four adjustable rod supports with wheels.
Sturdy construction.
Features table or wall mount option to save space.
Also in 220V model
RODSMITH QUAD ROD DRYING MACHINERODSMITH QUAD ROD DRYING MACHINERODSMITH QUAD ROD DRYING MACHINE
RODSMITH ROD DRYING MACHINE 9 RPM9 RPM motor.
Self centering chuck.
Adjustable rod stand with ball bearing wheels and locking supports. Jaw hooks to secure rubber bands for sure grip of rod.
Also available in 220V model
w hooks for secureJawd supportban
ITEM NO.RDM-1
RDM-1/220V
$20.15$30.45
WRAPPER - FINISH RW-1L/FNSH-MTR $17.20
WRAPPER - MAIN RW-1L/WRAP-MT $60.95
REPLACEMENT MOTORS ROD DRIER RDM-1/MTR QUAD DRIER RMD-4/MTR
Wayne Snedden with a Yukon pike
RDM-4 $209.35RDM-1 $99.00
RDS-9-110VEconomical Rod Drier System 9 RPM110V$52.50
RW-TSWrapper tail stock turns your wrapper iintto a llaththe for custom cork and EVA.
RW-TRTool rest aids in steadying tools during custom cork and EVA shaping.
RW-JR/TENSIONThread tensioner unit for RW-JR only - includes washers & bushings.
RW-1/CARRIAAGE Original 4-spoool carriage.
RW-1/PEDALClassic foot pedal for all models. 220V model available (RW-1/220V-PDL)
RW-1/ROD-SPR T Adjustable rod support for high speed rod turning.
.RW-1/CHUCKComplete chuck assembly now includes hooks for better rod suppoort
RW-1/LG-O-RNG Drive Belt - 4.5” dia.
for all RodSmith Power Wrappers
RW-1/SM-O-RNGRW-1L & 3L small “O” ring for the rod support wheel - 1.0” dia.
RW/DX-CHK-SUpgrade Your RW-1L or RW-3L Wrappers Includes 2 sets of cushion jaws.
Sturdy metal fly wheel & stand.
Accepts up to 1¼” O.D.
Great for turning cork.
RW/DX-CHK-JAWS2 sets - concave to fit large O.D. & convex to fit small O.D
RW-3L/TC2Dual Thread-tension carriage
cooncave
convex
RW-1/AL-BASEOriginal 4 ft. aluminum base section with slat & screws.
RW-3L/AL-BASE32-inch aluminum base sec-tion with slat & screws for the RW-3L & RW-3XL.
RW-3L/MTL-SLATMetal slat connectors (2) for baseextension on RW3L & RW-3XL.
Easily cut and shape cork and EVA on your existing RW-3L or RW-3XL.
RW-1/RHEOSTAT* Wrapping motor speed control. 220V model available(RW-1/RHEO/220V)
RW-THSK RW-THSK is a new Thread Magazine System for the PacBay rod wrapper thread tension carriage. It enables you to stack two additional spools on top of the existing thread tensioner to add more thread spools to the wrapper. It also allows you to organize your thread spools and quickly change out to two new colors. RW-THSK comes with a detachable screw-down base plate and two mounting screws. This tensioner can also be used to build your own custom rod wrapper.
RW-THSK SHOWN MOUNTED ON RW-3L/TC2
RW/DX-CHK-S $220.50 RW/DX-CHK-JAWS $3.10RW-3L/TC2 $63.70 RW-1/LG-O-RNG $4.75RW-1/CARRIAGE $63.70 RW-1/SM-O-RNG $1.25RW-TR $53.35 RW-3L/MTL-SLAT $6.99RW-TS $67.20 RW-1/CHUCK $35.15RW-1/PEDAL $42.00 RW-3L/AL-BASE $128.80RW-1/RHEOSTAT $26.60 RW-1/AL-BASE $126.00RW-THSK $30.80 RW-JR-TENSION $22.50RW-1/ROD-SPRT $49.85