TEST

EQ

UIPM

ENT

AND

SEIS

MO

MET

ERS

Rockwell Hardness Testing Machines

HR-100/200/300/400/500 Series

Five economical Rockwell hardness testing machines to suit practically every application...

Features

An environmentally friendly energy-saving model.The basic operation is all manual, including weight changing (total test force selection).

The newly designed frame provides maximum clearance for positioning the workpiece. A flat table is all that is needed for mounting these testing machines.

Simple to operateWith analogue type (HR-110MR, HR-210MR), the gauge presetting operation is unnecessary by the adoption of an automatic presetting dial gauge.

HR-110MR does not require a power source, and is considered to be environmental friendly.

Rockwell hardness testing machineHR-110MR Order No.963-210

Manual weight changing (with total test force selected) and handling of preliminary test force. Motor drive controls loading sequence.

Rockwell hardness testing machineHR-210MR Order No.963-220

2

Five economical Rockwell hardness testing machines to suit practically every application...

• The digital type (HR-430MR andHR-430MS), with the adoption of theautomatic steering wheel brake & the automatic load sequence, with only simple handling test possibility.

The digital type (HR-320MS, HR-430MR and HR-430MS) hasdigimatic output and our Digimatic Mini-Processor (DP-1VR) to print and input tools (USB-ITN-E) to connect to a PC and use for data transfer.

Brinell hardness tests can be performed by using the following optional accessories: a Brinell indenter, a weight set and a measurement microscope.

Economy type, but supports dial switching power steering and support of all test standards and equipped with automatic brake handle auto start feature. Motor drive loads controls loading sequence.

Rockwell hardness testing machineHR-430MR Order No.963-240

Manually handles test force and preliminary test force selection. Motor drive controls loading sequence.

Dual type (Rockwell/Rockwell superficial) hardness testing machine

HR-320MS Order No.963-231

Economy type, but supports dial switching power steering and support of all test standards and equipped with automatic brake handle auto start feature. Motor drive controls loading sequence.

Twin type (Rockwell/Rockwell superficial combined use) hardness test equipment

HR-430MS Order No.963-241

3

SPECIFICATIONS

Order No. Item Description Order No. Item Description

—*1 Diamond indenter For R (for HR-xxxMR) — Hardness test block 65HR30N(onlyHR-xMSattachment)

—*1 Diamond indenter For R/S (for HR-xxxMS) — Hardness test block 70HR30T(onlyHR-xMSattachment)

— Steel ball indenter ø1/16" (ø1.5875mm) 357651 AC adapter AC100-240V,1.2ADC12V,3.5A

— Steel ball (spare) ø1/16" (ø1.5875mm) 02ZAA000 AC adapter —— Flat anvil ø64mm User's manual

— V-anvil (large) ø40mm,120ºV-groove30mmwide 56AAK312 Vinyl cover

— Hardness test block 60HRC — Accessory box— Hardness test block 30HRC — Level— Hardness test block 90HRB

Scale Hardness symbol*1 Indenter Preliminary

test force Total test force Hardness range applicable Standard Scale Hardness

symbol*1 Indenter Preliminary test force Total test force Hardness range

applicable Standard

Rockwell hardness

A HRAConical

diamond

98.07N(10kgf)

588.4N(60kgf) 20-95HRA

ISO6508-1JISZ2245Coverage

Rockwell Superficial hardness

15N HR15NConical

diamond

29.42N(3kgf)

Coverage

147.1N(15kgf) 70-94HR15N

ISO6508-1JISZ2245Coverage

D HRD 980.7N (100kgf) 40-77HRD 30N HR30N 294.2N(30kgf) 42-86HR30NC HRC 1471N(150kgf) 10-70HRC 45N HR45N 441.3N(45kgf) 20-77HR45NF HRF Sphere

ø1.5875mm(1/16")

588.4N(60kgf) 60-100HRF 15T HR15T Sphere ø1.5875mm

(1/16")

147.1N(15kgf) 67-93HR15TB HRB 980.7N (100kgf) 20-100HRB 30T HR30T*2 294.2N(30kgf) 29-82HR30TG HRG 1471N(150kgf) 30-94HRG 45T HR45T 441.3N(45kgf) 10-72HR45TH HRH Sphere

ø3.175mm(1/8")

588.4N(60kgf) 80-100HRH 15W HR15W Sphere ø3.175mm

(1/8")

147.1N(15kgf)E HRE 980.7N (100kgf) 70-100HRE 30W HR30W 294.2N(30kgf)K HRK 1471N(150kgf) 40-100HRK 45W HR45W 441.3N(45kgf)L HRL Sphere

ø6.35mm(1/4")

588.4N(60kgf) 15X HR15X Sphere ø6.35mm

(1/4")

147.1N(15kgf)M HRM 980.7N (100kgf) 30X HR30X 294.2N(30kgf)P HRP 1471N(150kgf) 45X HR45X 441.3N(45kgf)R HRR Sphere

ø12.7mm(1/2")

588.4N(60kgf) 15Y HR15Y Sphere ø12.7mm

(1/2")

147.1N(15kgf)S HRS 980.7N (100kgf) 30Y HR30Y 294.2N(30kgf)V HRV 1471N(150kgf) 45Y HR45Y 441.3N(45kgf)

*1: In the case of scales which specify a spherical indenter, a letter should be appended to the hardness symbol (“S” for steel, “W” for tungsten carbide) when quoting the measurement result to show that it was obtained with an indenter made of the indicated material.

*2: Applied to a specimen of less than 0.6mm thickness a special test, which takes account of the influence of the impression made by the test sphere on such a thin specimen, may be designated as HR30Tm and is defined in JIS Z 2245 appendix A.

*1: Available for specific model.

Brinell hardness tests can be performed by using the following optional accessories: a Brinell indenter, a weight set and a measurement microscope.

ROCKWELL HARDNESS SCALE

STANDARD ACCESSORIES

Code No. 963-210-30E 963-220-30E 963-231-30E 963-240-30E 963-241-30EModel No. HR-110MR HR-210MR HR-320MS HR-430MR HR-430MS

Type of hardness testRockwell

— — Rockwell superficial — Rockwell superficialStandard JIS B 7726 ISO6508-2 (ASTM E18)Display Analog DigitalMinimum reading 0.5HR graduation 0.1HR indicationPreliminary test force (handling support) Automatic pre-setting dial gauge Loading navigator indication Automatic steering wheel brake

Preliminary test force setting — — Dial switching — Dial switchingTotal test force setting Weight change Dial switching

Total test force control ManualMotor drive Button start

Motor drive Automatic start

Test force duration Manual Fixed3-5.5sormanual 3-60ssettingormanualoperationMaximum specimen height 180mm (100mm if cover is attached)Maximum specimen depth 165mm (from indenter axis to the frame)

Function— — Success or failure decision function— — Offset revision function— — Hardness conversion function

Data output — — Digimatic(SPC),RS-232CPower supply No power required AC100-240V,1.2A

Dimensions Approximately 296(W) x 512(D) x 780(H)mm

Approximately235(W)x512(D)x 780(H)mm

Approximately235(W)x516(D)x780(H)mm

Mass Approximately49kg Approximately47kg Approximately47kg Approximately 50kg

4

Advanced Rockwell Hardness Testing MachinesHR-521/ 522/ 523

Advanced Rockwell Type Hardness Testing Machines

HR-500 Series

Features

Specifications

Multiple test force generation for Rockwell, Rockwell Superficial and optional Brinell hardness.

Projected-noseindenterarmforeasyreachofinterior(min.ø1.6"(40mm)/ø.86"(22mm)*) and exterior surfaces. *When using an optional diamond indenter (19BAA292).

Closed Loop electronic test force control for accurate loading.

Auto-stop elevation table and automatic preliminary test force loading provide consistent test force generation.

HR-521Order number810-202E

HR-522Order number810-203E

HR-523Order number810-204E

Order number 810-202E 810-205E 810-203E 810-206E 810-204E 810-207EModel HR-521 HR-521L HR-522 HR-522L HR-523 HR-523LTest Scales Rockwell and Rockwell SuperficialStandard JIS B 7726 ISO 6508-2 ASTM E18-10Preliminary Test Force 98.07N (10kgf), 29.42 (3kgf)Test Force Rockwell 588.4N (60kgf), 980.7N (100kgf), 147N (150kgf)Test Force Superficial 147.1N (15kgf), 294.2N (30kgf), 441.3N (45kgf)Test Force Brinell 1839 61.29 98.07 153.2 245.2 294.2 306.4 612.9 980.7 1226 1839

Touch Screen LCD Showing: Hardness value, Converted hardness value, Test conditions, OK/NG tolerance judgement, statistical processing result.Cylindrical/spherical surface compensation, data offset, Hardness conversion (HV, HK, HRA/B/C/D/F/G15T/30T/45T/15N/30N/45N, HS, HB, HBW, tensile strength),

OK/±NG tolerance judgement, measured data editing, data memory (max 1024 data), SPC calculation (No. of data, max/min/mean values, range, upper/lower limit values,standard deviation, No. of passing/defective) Histogram, x-R chart.

Hardness Min. Value 0.1HRScale Conversions Advanced with correctionsPreliminary Test Force Manual (with automatic brake-start) Fully Motorized Power Elevating ScrewTotal Test Force Load Control Automatic (loading, duration, unloading)Loading Method Closed Loop Electronic ForceLoad Duration (Dwell) Adjustable (0s to 120s) or manualMax. Specimen Height 8.1” (205mm) 15.5” (395mm) 8.1” (205mm) 15.5” (395mm) 8.1” (205mm) 15.5” (395mm)Max. Depth 5.9” (150mm)Data Output RS-232C, SPC and CentronicsPower supply 120V AC (±10%), 60Hz

Dimension (D x W x H)26.4” (670mm) x 9.8” (250mm)

x 23.8” (605mm)26.4” (670mm) x 9.8” (250mm)

x 29.5” (750mm)26.4” (670mm) x 9.8” (250mm)

x 23.8” (605mm)26.4” (670mm) x 9.8” (250mm)

x 29.5” (750mm)26.4” (670mm) x 9.8” (250mm)

x 23.8” (605mm)26.4” (670mm) x 9.8” (250mm)

x 29.5” (750mm)Mass 60kg 70kg 60kg 70kg 60kg 70kg

¯

5

without HR110MR,HR-210MR

Optional accessories

810-038Round table ø250mm

For large specimens

810-027VARI-REST

For testing long specimens using anvil

810-026Fine adjustment table for Jominy test Fine adjustment table for Jominy testLength400mmgroove width 50mmFor cylindrical specimens

810-030 Diamond spot anvil 10mmFor sheet specimens

810-042 Small V anvil

810-029Special V anvil Length400mm,groovewidth50mmSupports the standard hardenability test for steelFor cylindrical specimens

810-037Round table ø180mm

For large specimens

810-040 V anvil (large) ø40mm,groovewidth30mmFor large specimens

810-043 Spot anvil ø12mmFor sheet specimens

810-041 V anvil (small)ø40mm,groovewidth6mmFor cylindrical specimens

300700

554400

810-044 Spot anvilø5.5mmFor sheet specimens

810-028 Jack restFor testing long specimens using table or anvil

810-048Console table

06ADV380EUSB Direct Input Tool The USB plug is connected to a computer

264-504Digimatic mini processor DP-1VR* No connection cable supplied. (Should be ordered separately)Connectioncable(1m)937387

ø10mmFor cylindrical specimens

Unit: mm

6

Hardness testing

machine

Weight setIndenters for Brinell test

19BAA277 19BAA279 19BAA280 19BAA284

Order No. Item ø1mm ø2.5mm ø5mm ø10mm

HR-110MRHR-210MR 56AAK286 Brinell weight set for HR-110MR, 210MR

62.5 125 187.5 — HBW2.5/62.5HBW2.5/187.5

HBW5/62.5HBW5/125 (HBW10/100*)

HR-320MS 56AAK287 BrinellweightsetforHR-320MS31.2562.5125187.5

(HBW1/10*)(HBW1/30*)

HBW2.5/31.25HBW2.5/62.5

HBW2.5/187.5

HBW5/62.5HBW5/125 (HBW10/100*)

HR-430MR 56AAK288 BrinellweightsetforHR-430MR62.5 125 187.5 — HBW2.5/62.5

HBW2.5/187.5HBW5/62.5HBW5/125 (HBW10/100*)

HR-430MS 56AAK289 BrinellweightsetforHR-430MS31.2562.5125187.5

(HBW1/10*)(HBW1/30*)

HBW2.5/31.25HBW2.5/62.5

HBW2.5/187.5

HBW5/62.5HBW5/125 (HBW10/100*)

Spare cemented carbide ball

Order No. 19BAA281 19BAA283 19BAA162 19BAA163

Item 1mm 2.5mm 5mm 10mm

Size (Quantity) ø1mm (1 pc.) ø2.5mm (1 pc.) ø5mm (1 pc.) ø10mm (1 pc.)

Item Order No.Hardnessstandardblock32HRB 19BAA028Hardnessstandardblock42HRB 19BAA029Hardness standard block 52HRB 19BAA030Hardness standard block 62HRB 19BAA031Hardness standard block 72HRB 19BAA032Hardness standard block 82HRB 19BAA033Hardness standard block 92HRB 19BAA034

Hardness standard block 10HRC 19BAA035Hardness standard block 20HRC 19BAA036Hardnessstandardblock30HRC 19BAA037Hardnessstandardblock40HRC 19BAA038Hardness standard block 50HRC 19BAA039Hardness standard block 60HRC 19BAA040Hardness standard block 70HRC 19BAA041

Hardnessstandardblock41HR30N 19BAA042Hardnessstandardblock50HR30N 19BAA043Hardnessstandardblock60HR30N 19BAA044Hardnessstandardblock73HR30N 19BAA045Hardnessstandardblock83HR30N 19BAA046Hardness standard block 75HR15N 19BAA047Hardness standard block 85HR15N 19BAA048Hardness standard block 90HR15N 19BAA049

Item Order No.Hardnessstandardblock32HR30T 19BAA050Hardnessstandardblock42HR30T 19BAA051Hardnessstandardblock52HR30T 19BAA052Hardnessstandardblock62HR30T 19BAA053Hardnessstandardblock72HR30T 19BAA054Hardness standard block 78HR15T 19BAA055Hardness standard block 82HR15T 19BAA056Hardness standard block 87HR15T 19BAA057

Hardnessstandardblock40-50HRC 19BAA124Hardnessstandardblock30-35HRB 19BAA127Hardnessstandardblock64-69HR30N 19BAA128Hardnessstandardblock36-40HR30T 19BAA150

Diamond indenter (For HR-***MR) 19BAA072Diamond indenter (For HR-***MS) 19BAA073

Steel ball indenter 1/16" 19BAA074Steel ball indenter 1/8" 19BAA075Steelballindenter1/4" 19BAA076Steel ball indenter 1/2" 19BAA077

For Brinell hardness testing, the following optional accessories are required: an indenter, a weight set and a measurement microscope.

TEST BLOCKS

*The built-in weights are used for this range. Only an indenter need be selected.

Measurement microscope for Brinell hardness test

Order No. Item

19BAA161 Measurement microscope (20X model)

19BAA318 Measurementmicroscope(40Xmodel)

19BAA319 Measurement microscope (100X model)

7

Coordinate Measuring Machines

Sensor Systems

Vision Measuring Systems

Test Equipmentand Seismometers

Form Measurement

Digital Scale and DRO Systems

Optical Measuring

Small Tool Instrumentsand Data Management

Whatever your challenges are, Mitutoyo supports you from start to finish.

Mitutoyo is not only a manufacturer of top quality measuring products but one that also offers qualified support for the lifetime of the equipment, backed up by comprehensive services that ensure your staff can make the very best use of the investment.

Apart from the basics of calibration and repair, Mitutoyo offers product and metrology training, as well as IT support for the sophisticated software used in modern measuring technology. We can also design, build, test and deliver bespoke measuring solutions and even, if deemed cost-effective, take your critical measurement challenges in-house on a sub-contract basis.

Note: Product illustrations are without obligation. Product descriptions, in particular any and all technical specifications, are only binding when explicitly agreed upon.MITUTOYO and MiCAT are either registered trademarks or trademarks of Mitutoyo Corp. in Japan and/or other countries/regions. Other product, company and brand names mentioned herein are for identification purposes only and may be the trademarks of their respective holders.

MAP●1320(2) Printed in Singapore 0.341015(3.1)PS

Mitutoyo Asia Pacific Pte. Ltd.Company Reg No. 197800892N24 Kallang Avenue, Mitutoyo Building, Singapore 339415Tel: (65) 6294 2211 Fax: (65) 6299 6666 E-mail: mapsg@mitutoyo.com.sg

www.mitutoyo.com.sg | www.mitutoyo.com.my www.mitutoyo.co.th | www.mitutoyo.co.id

www.mitutoyo.com.vn | www.mitutoyo.com.ph

Mitutoyo (Malaysia) Sdn. Bhd.Mah Sing Integrated Industrial Park,4, Jalan Utarid U5/14, Section U5,40150 Shah Alam, Selangor, MalaysiaTel: (60) 3-7845 9318Fax: (60) 3-7845 9346E-mail: mmsb@mitutoyo.com.myPenang BranchTel: (60) 4-641 1998 Fax: (60) 4-641 2998E-mail: mmsbpen@mitutoyo.com.myJohor Branch Tel: (60) 7-352 1626 Fax: (60) 7-352 1628E-mail: mmsbjhr@mitutoyo.com.my

Mitutoyo (Thailand) Co., Ltd.76/3-5, Chaengwattana Road, Kwaeng Anusaowaree, Khet Bangkaen, Bangkok 10220, ThailandTel: (66) 2-080 3500 Fax: (66) 2-521 6136E-mail: office@mitutoyo.co.thChonburi Branch Tel: (66) 2-080 3563 Fax: (66) 3-834 5788Amata Nakorn Branch Tel: (66) 2-080 3565 Fax: (66) 3-846 8978

PT. Mitutoyo IndonesiaJalan Sriwijaya No.26 Desa cibatu Kec. Cikarang Selatan Kab. Bekasi 17530, IndonesiaTel: (62) 21-2962 8600 Fax: (62) 21-2962 8604 E-mail: ptmi@mitutoyo.co.id

Mitutoyo Vietnam Co., Ltd.No. 07-TT4, My Dinh - Me Tri Urban Zone, My Dinh 1 Ward, Nam Tu Liem District, Hanoi, VietnamTel: (84) 4-3768 8963 Fax: (84) 4-3768 8960E-mail: mvc-hn@mitutoyo.com.vnHo Chi Minh City BranchTel: (84) 8-3840 3489 Fax: (84) 8-3840 3498E-mail: mvc-hcmc@mitutoyo.com.vn

Mitutoyo Philippines, Inc.Unit 2103, GMV Building 2, 107 North Main Avenue, Laguna Technopark, Biñan, Laguna 4024, PhilippinesTel: (63) 49-544 0272Fax: (63) 49-544 0272E-mail: mpi@mitutoyo.com.ph