rjg flowmeter recommendation form
TRANSCRIPT
RJG, Inc. | 3111 Park Drive, Traverse City, MI 49686 USA | 231-947-3111 www.rjginc.com
RJG Flowmeter Recommendation Form: How to Determine Max/Min Water Flow Rate
by Monitoring the Whole Manifold The purpose of this document is to guide you through step-by-step how to properly get a max/min water flow rate when you don’t have a flowmeter on hand. This will ensure you get the best sizing of flowmeter for your specific application. Please follow the steps below, then complete the form on page 2. NOTE: Be sure to use safety measures when doing these tests.
RJG, Inc. | 3111 Park Drive, Traverse City, MI 49686 USA | 231-947-3111 www.rjginc.com
RJG Flowmeter Recommendation Form How to Determine Max/Min Water Flow Rate
by Monitoring the Whole Manifold
Please complete this form and email it to: [email protected]. One of our customer support representatives will reach out to you with a recommendation. Thank you!
Company: Name: Date:
Machine: Mold:
What is the size connection you are mounting the flow meter to?
What type of threads is the connection (NPT or BSPP)? NPT=National Pipe Thread BSPP=British Standard Parallel Pipe NPT or BSPP
What is the housing material you would prefer? Material is based on the connection size where flowmeter will be installed.
=/< 1/2" Brass Nylon >/= 3/4" SS Alum
What is the minimum expected flow? (Follow the above instructions)
What is the maximum expected flow? (Follow the above instructions)
What is the maximum temperature you run your coolant at?
What is the maximum line pressure expected?
Will the flowmeter be more than 3 meters (9 feet) away from the din modules?
Do you need a user interface (LED screen)?
What is the intended use (strategy) for this flowmeter?