ring- familie - komos.de · content system komos data socket 11 system komos data...
TRANSCRIPT
Unsere KOMOS Daten-
KO M O S G m b H 0 7 6 1 6 Bü rg e l Th ü r i n g e n D e u ts c h l a n d Ba h n h o f s t r a s s e 2
Made in Germany
Ring-
Familie
Technische Angaben Die technischen Angaben in diesem Katalog ent-sprechen den Stand bei Drucklegung und sind nach bestem Wissen ermittelt worden.Dennoch behalten Wir uns Irrtümer und Druckfehler vor.
ÄnderungÄnderungen zu Gunsten des technischen Fortschritts bzw. Anpassungen an geänderte Normen oder Vor-schriften bleiben vorbehalten.
Fotos und ZeichnungenFotos und Zeichnungen in diesem Katalog sind für Ausführungsbeispiele und nicht verbindlich für die Ausführung bei Lieferung.
HerausgeberKOMOS GmbHAlle Rechte vorbehalten. Nachdruck, auch auszugs-weise, nur nach schriftlicher Genehmigung.Druckdatum: 01.12.2017
Technical InformationThe technical Information in this catalogue is correct at the time of printing and has determined according to the best of our knowlegdement. All rights reserved
including errors in content and misprints.
ModificationModifications due technical progress or due to chan-
ged statutory requirements are reserverd.
Photos and DrawingsPhotos and drawings in this catalogue are examples
and not binding for the finished product at delivery.
EditorKOMOS GmbH
Copyright reserved. Reprint, even in parts, subject ot prior written approval
print date: 20.02.2017
Inhaltsverzeichnis
System KOMOS Datendose 1
System KOMOS Datenverteiler 2
KOMOS Datentechnik TV 3
KOMOS Datendose 5
KDD Basismodul 6
KDD 500 Einsätze 6
KDD 500 TV Einsatz 7
KDD 500 Abdeckplatte 7
KDD 500 Zentralplatten 7
KDD 500 Baustellenabdeckung 8
KDV 500 Verteiler 9
KDV 500 Einsätze 10
KDV 500 TV Einsatz 10
weitere Artikel auf Anfrage unter:KOMOS GmbH Bahnhofstrasse 2 D - 07616 BürgelTelefon: +49 (0) 36692 490 11Telefax: +49 (0) 36692 490 55Mail: [email protected]: komos.de
content
System KOMOS data socket 11
System KOMOS data distributor_____12
KOMOS datatechology TV 13
KOMOS data socket 15
KDD basic module 16
KDD 500 inserts 16
KDD 500 TV insert 17
KDD 500 plate 17
KDD 500 central plates 17
KDD 500 worksite coverage 18
KDV 500 patchpanels 19
KDV 500 inserts 20
KDV 500 TV insert 20
further articles on request under: KOMOS GmbH Bahnhofstrasse 2 D - 07616 Bürgeltelefon: +49 (0) 36692 490 11telefax: +49 (0) 36692 490 55mail: [email protected]: komos.de
Ein Grundsystem aus Dosenkörper und DatenRing
plus vielfältige EinsätzeDateneinsätze tV Gestik
BeDienelement für steuerunG
2x Cat 6A 1x TV | 1x Cat 6A 1x Gestikeinsatz
1x Cat 6A | 2x Cat 5 1x TV | 2x Cat 5
1x Cat 6A | 2x Cat 3
4x Cat 5
2x Cat 5 | 2x Cat 3
4x Cat 3
kOmOs DatenprODukte -eine starke familie für Die zukunft
KDD
1
kOmOs DatenprODukte -eine starke familie für Die zukunft
Ein Grundsystem aus Verteiler
plus vielfältige Einsätze19er schlitten 8er schlitten
8er schlitten ap WanDVerteiler
2er schlitten
Dateneinsätze tV1x Cat 6A 1x TV
2x Cat 5
2x Cat 3
KDD & KDVEine Familie mit 2 Seiten und gemeinsamen Stärken
Flexibil
Lösungsorientiert
Elektrikerfreundlich
XInnovativ
Beispiellos
Einzigartig auf dem Markt
Leistungsstark
2
Komple
KDV
Neu:
KOMOS Datentechnik TV
Mit diesen einzigartigen Komponenten kön-nen Fernsehsignale über das Datennetz gesendet werden. Dadurch kann die strukturierte Gebäudeverkabelung stark vereinfacht werden. Außerdem fallen keine zusätzlichen Kosten durch die Verlegung von Koaxialkabel an.
Kurze Erklärung:Die Transformation des unsymmetrischen 75Ω TV Signals auf ein symmetrisches Signal mit einer Impedanz von 100Ω, ermöglicht die Übertragung mit Ethernet-Kabel. Zusätzlich zum Balun System bietet die Gebäudeverkabe-lung aus KOMOS Datendose und KOMOS Datenverteiler vielfältige Anwendungsmöglichkeiten und Adaptionen. Somit ist es möglich, ohne Neuverlegung die Multimedia Anschlüsse neu zu strukturieren.
KOMOS Datentechnik TV Modul:Anschluss von zwei Ethernet (Empfehlung Cat 7) Kabeln auf KOMOS Datenring. Erstes Kabel überträgt Fernsehsignal, zweites Kabel überträgt je nach Modul ent-weder 2x Cat 5 Signal oder 1x Cat 6A Signal
KOMOS Datentechnik TV Verteiler MODUL:Anschluss von einem Ethernet Kabel auf Patchpanel. Über-tragung des Fernsehsignals an zweite Stelle im System. Für zweiten Anschluss ist bspw. ein weiteres KOMOS Daten TV Modul bspw. Dose (Artikel-Nr. 0.1602-50) mit KDTV Einsatz 1x TV + 1 Cat 6A (Artikel-Nr. 0.1602-74) notwen-dig.
3
Abbildung 0.1602-74
Abbildung 0.1602-75
Abbildung 0.1702-75
Die Folgenden Standards können übertragen werden:- DVB -C (Kabel-TV)- DVB -T (Terrestrisches TV)- DVB -T2 (Terrestrisches TV)- DVB -S (SAT-TV)- DVB -S2 (SAT-TV)- DVB-I (Internet TV)
Neu:
KOMOS Datentechnik TV
Möglichkeiten zum Einsatz
4
Kabelfernsehen | DVB-C
Satellitenfernsehen | DVB-S mit Einsatz einer Kopfstation
DVB -T2 -Fernsehen, ehemals DVB-T
KOMOS Datendose
Patch Panel KOMOS Daten Verteiler
TV
Push On Adapter
Hausanschluss
Fernseh-/Datenanschluss
Verstärker
Router
Dachantenne
Fensterantenne
Zimmerantenne
Verteiler
Satellitenschüssel mit LNB
Kopfstation
Datenkabel
Koaxialkabel
21
45678
3
9ABCDE
KOMOS-Nr. VPE
KDD 500 8/8 (8) AP Cat 6A /Klasse EAModuldose KDD 500 Cat 6A /EA AP komplett mit Busch - Jaeger Aufputzbecher, Abdeckplatte 80x80 mm und Zentralplatte 50x50 mm mit Staubschutzkappen, optional geeignet für Zentralplatten aller gängigen Schalterhersteller (Schalterprogramm kompatibel), einfacher Anschluss durch LSA Ringtechnologie, Bedruckung nach EIA/TIA 568A, Montage eines Hutschienenadapters optional möglich
KDD 500 8/8 (8) AP reinweiß (ähnl. RAL 9010) 0.1602-41BG 10
KDD 500 8/8 (8) AP perlweiß (ähnl. RAL 1013) 0.1602-41AG 10
KDD 500 8/8 (8) UP Cat 6A /Klasse EAModuldose KDD 500 Cat 6A /EA UP komplett mit Abdeckplatte 80x80 mm und Zentralplatte 50x50 mm mit Staubschutzkappen, optional geeignet für Zentralplatten aller gängigen Schalterhersteller (Schalterprogramm kompatibel), einfacher Anschluss durch LSA Ringtechnologie, Bedruckung nach EIA/TIA 568A
KDD 500 8/8 (8) UP reinweiß (ähnl. RAL 9010) 0.1602-31BG 10
KDD 500 8/8 (8) UP perlweiß (ähnl. RAL 1013) 0.1602-31AG 10
KDD 500 8/8 (8) KB Cat 6A /Klasse EAModuldose KDD 500 Cat 6A /EA KB nur mit Zentralplatte 50x50 mm mit Staubschutzkappen, optional geeignet für Zentralplatten aller gängigen Schalterhersteller (Schalterprogramm kompatibel ),einfacher Anschluss durch LSA Ringtechnologie, Bedruckung nach EIA/TIA 568A
KDD 500 8/8 (8) KB reinweiß (ähnl. RAL 9010) 0.1602-21BG 10
KDD 500 8/8 (8) KB perlweiß (ähnl. RAL 1013) 0.1602-21AG 10
KDD 500 8/8 (8) KBO Cat 6A /Klasse EAModuldose KDD 500 Cat 6A /EA KB ohne Zentralplatte /Abdeckung, optional geeignet für Zentralplatten aller gängigen Schalterhersteller, Schalterprogramm kompatibel, Designfähig einfacher Anschluss durch LSA Ringtechnologie, Bedruckung nach EIA/TIA 568A
KDD 500 8/8 KBO 0.1602-11OO 10
KOMOS Datenanschlusstechnik Cat 6
A /Klasse E
A (500MHz)
Anschlussdosen 10GBASE-T GHMT zertifiziert
5
Abbildung 0.1602-41BG
Abbildung 0.1602-31BG
Abbildung 0.1602-21BG
KOMOS-Nr. VPE
KDD 500 BasismodulBasismodul, bestehend aus Dosenkörper und Beschaltungsring (Bedruckung nach EIA/TIA 568A) und Baustellenabdeckung.
Nur in Verbindung mit Einzelmodulen 0.1602-52, 0.1602-53, 0.1602-56, 0.1602-54, 0.1602-55, 0.1602-74 und 0.1602-75 lieferbar.
Basismodul 0.1602-50 10
KDD 500 8/8 (8) Einsatz Cat 6A /Kl. EAKDD 500 8/8 (8) Einsatz Cat 6A /Klasse EA zum Einbau in KDD 500 Basismodul
KDD 500 8/8 (8) Einsatz Cat 6A / Klasse EA 0.1602-51 10
KDD 500 CS X/X/X/XKDD 500 Cablesharing Einsatz 4 x Cat.5 8(4 ) Beschaltung Ethernet (1-2/3-6), oder 4 x Cat 3 8(4) Beschaltung ISDN(4-5/3-6) oder 2 x Cat.5 8(4) Beschaltung Ethernet (1-2/3-6) und 2 x Cat 3 8(4) Beschaltung ISDN(4-5/3-6) zum Einbau in KDD 500 Basismodul oder Austausch vorhandener KDD 500 Module
KDD 500 CS 5/5/5/5 0.1602-52 10
KDD 500 CS 3/3/3/3 0.1602-53 10
KDD 500 CS 5/5/3/3 0.1602-56 10
KDD 500 CS 6A /Kl. EA /5/5KDD 500 Cablesharing Einsatz 1 x Cat 6A / Klasse EA 8(8), 2 x Cat. 5 8(4) Beschaltung Ethernet (1-2/3-6), zum Einbau in KDD 500 Basismodul oder Austausch vorhandener KDD 500 Module
KDD 500 CS 6A /Kl. EA /5/5 0.1602-54 10
KDD 500 CS 6A /Kl. EA /3/3KDD 500 Cablesharing Einsatz 1x Cat 6A / Klasse EA 8(8) , 2 x Cat. 3 8(4) Beschaltung ISDN(4-5/3-6), zum Einbau in KDD 500 Basismodul oder Austausch vorhandener KDD 500 Module
KDD 500 CS 6A /Kl. EA /3/3 0.1602-55 10
KOMOS Datenanschlusstechnik Cat 6
A /Klasse E
A (500MHz)
Anschlussdosen 10GBASE-T GHMT zertifiziert
6
Abbildung 0.1602-56
KOMOS Datenanschlusstechnik Cat 6
A /Klasse E
A (500MHz)
Anschlussdosen 10GBASE-T GHMT zertifiziert
KOMOS-Nr. VPE
KDD 500 CS 5/5/TV EinsatzKDD 500 8/8(8)RJ45 Cat 6A (ISO/IEC) 500MHz 10 Gigabit/ TV KDD 500 Einsatz oder CS 2x Cat5 8(4)RJ45 / 1xTV, nachrüstbarer aufsteck- und danach einschraubbarer Wechseleinsatz für KDD 500 Artikel, Cablesharing CS Seite: Beschaltung Ethernet (1-2/3-6), TV Seite:Die Transformation des unsymmetrischen 75 Ohm TV Signals auf ein symmetrisches Signal mit einer Impedanz von 100 Ohm ermöglicht die Übertragung mit Ethernet-Kabel.
KDD 500 8/8(8) Cat 6A/TV Einsatz 0.1602-74 1
KDD 500 CS 5/5/TV Einsatz 0.1602-75 1
KDD 500 AbdeckplatteAbdeckplatte 80x80 mm
perlweiß (ähnlich RAL 1013) 0.1601-53AG 10
reinweiß (ähnlich RAL 9010) 0.1601-53BG 10
KDD 500 ZentralplatteZentralplatte 50x50 mm für KDD 500 Einsatz 8/8(8) Cat 6A,Kl. EA mit integrierten Staubschutzklappen und Sichtfenster für Beschriftungseinlage über Zwischenring passend für viele gängige Schalterprogramme
perlweiß (ähnlich RAL 1013) 0.1601-52AG 10
reinweiß (ähnlich RAL 9010) 0.1601-52BG 10
KDD 500 Zentralplatte CS 5/5/5/5Zentralplatte 50x50 mm für KDD 500 Einsatz 4x Cat 5, mit Variantenbedruckung und Sichtfenster für Beschriftungseinlage, über Zwischenring passend für viele gängige Schalterprogramme
perlweiß (ähnlich RAL 1013) 0.1601-58AG 10
reinweiß (ähnlich RAL 9010) 0.1601-58BG 10
KDD 500 Zentralplatte CS 3/3/3/3Zentralplatte 50x50 mm für KDD 500 Einsatz 4x Cat 3, mit Variantenbedruckung und Sichtfenster für Beschriftungseinlage, über Zwischenring passend für viele gängige Schalterprogramme
perlweiß (ähnlich RAL 1013) 0.1601-56AG 10
reinweiß (ähnlich RAL 9010) 0.1601-56BG 107
Abbildung 0.1601-53BG
Abbildung 0.1601-52BG
Abbildung 0.1601-58BG
Abbildung 0.1601-56BG
Abbildung 0.1602-74
KOMOS-Nr. VPE
KDD 500 Zentralplatte CS Cat 6A/5/5Zentralplatte 50x50 mm für KDD 500 Einsatz 1x Cat 6A/Kl. EA 8(8) und 2x Cat 5 8(4), mit Variantenbedruckung und Sichtfeldern mit Beschriftungseinlage
perlweiß (ähnlich RAL 1013) 0.1601-57AG 10
reinweiß (ähnlich RAL 9010) 0.1601-57BG 10
KDD 500 Zentralplatte CS Cat 6A/3/3 oder Cat 6A/TV
Zentralplatte 50x50 mm für KDD 500 Einsatz 1x Cat 6A/Kl. EA 8(8) und 2x Cat 3 8(4) oder Einsatz 1x Cat6A/Kl. EA 8(8) and TV, mit Variantenbedruckung und Sichtfeldern mit Beschriftungseinlage
Cat 6A/3/3 perlweiß (ähnlich RAL 1013) 0.1601-55AG 10
Cat 6A/3/3 reinweiß (ähnlich RAL 9010) 0.1601-55BG 10
Cat 6A/TV perlweiß (ähnlich RAL 1013) 0.1601-74AG 10
Cat 6A/TV reinweiß (ähnlich RAL 9010) 0.1601-74BG 10
KDD 500 Zentralplatte CS 5/5/3/3Zentralplatte 50x50 mm für KDD 500 Einsatz 2x Cat 5 8(4) und 2x Cat 3 8(4), mit Variantenbedruckung und Sichtfeldern mit Beschriftungseinlage
perlweiß (ähnlich RAL 1013) 0.1601-59AG 10
reinweiß (ähnlich RAL 9010) 0.1601-59BG 10
KDD 500 Zentralplatte CS 5/5/TVZentralplatte 50x50 mm für KDD 500 Einsatz 2x Cat 5 8(4) und 1x TV mit Variantenbedruckung und Sichtfeldern mit Beschriftungseinlage
perlweiß (ähnlich RAL 1013) 0.1601-75AG 1
reinweiß (ähnlich RAL 9010) 0.1601-75BG 1
KDD 500 BaustellenabdeckungBaustellenabdeckung 80x80 mm zur Abdeckung des beschalteten Dosenkörpers oder KDD 500 KBO zum Schutz vor Verschmutzung.
KDD 500 Baustellenabdeckung 0.1601-54 10
KOMOS Datenanschlusstechnik Cat 6
A /Klasse E
A (500MHz)
Anschlussdosen 10GBASE-T GHMT zertifiziert
8
Abbildung 0.1601-57BG
Abbildung 0.1601-55BG
Abbildung 0.1601-59BG
Abbildung 0.1601-75BG
KOMOS Datenanschlusstechnik Cat 6
A /Klasse E
A (500MHz)
Anschlussdosen 10GBASE-T GHMT zertifiziert
KOMOS-Nr. VPE
KDV 500m Patchpanel Cat 6A / Klasse EA (500MHz)modulares, ausziehbares 19“ Patchpanel für / mit 24 Ports RJ 45 Cat 6A /Klasse EA (500MHz), mit zurückschiebbaren Anschlussfeld (gegen unbeabsichtigtes Herausziehen der Patchkabel), Module einzeln austauschbar, LSA- Anschlusstechnologie, PCB Blöcke mit Bedruckung EIA/TIA 568A, integrierte Kabelabfangung, Frontplatte RAL 7035, inklusive 19“ Befestigungsmaterial, Kabelbinder und Erdungskabel
bestückt mit 24 KDV 500m Cat 6A /Klasse EA 0.1702-41 1
unbestückt 0.1702-45 1
KDV 500m 8er Schlittenmit LSA PCB Blöcken und Kabelmanagment, Bedruckung nach EIA/TIA 568A, unbestückt, für max. 8 x KDV 500m Einsätze 0.1702-50/51/52/75
ohne Hutschienenadapter 0.1702-60 1
mit 2 Hutschienenadatern 0.1702-61 1
KDWV 500m AP Wandverteileraus Stahlblech eloxiert, Farbe RAL 7035 Wandmontage , BxHxT 150x35x170 mm bestückt mit KDV 500m 8er Schlitten mit LSA PCB Blöcken und Kabelmanagment, Bedruckung nach EIA/TIA 568A, unbestückt, für max. 8 x KDV 500m Einsätze 0.1702-50/51/52/75
unbestückt 0.1703-01 1
KDVS 500m 2er Schlittenmit LSA PCB Blöcken und Kabelmanagment, Bedruckung nach EIA/TIA 568A, unbestückt, für max. 2 x KDV 500m Einsätze 0.1702-50/51/52/75
unbestückt 0.1702-65 1
9
Abbildung 0.1702-45
Abbildung 0.1702-60
KOMOS Datenanschlusstechnik Cat 6
A /Klasse E
A (500MHz)
Anschlussdosen 10GBASE-T GHMT zertifiziert
KOMOS-Nr. VPE
KDV 500m Einsatz Cat 6A /Klasse EA (500MHz)Nach- bzw. Umrüsteinsatz 1x RJ45 8(8) Cat 6A /Klasse EA (500MHz), für KDV 500m (unbestückt) Artikel 0.1702-45, KDVS Schlitten Artikel 0.1702-60/61 u. 0.1702-65 sowie AP-Wandverteiler 0.1703-01
perlweiß (ähnlich RAL 1013) 0.1702-50 10
KDV 500m Einsatz 2x Cat 5 8(4)Nach- bzw. Umrüsteinsatz 2 x RJ45 8(4) Cat 5 Beschaltung Ethernet (1-2/3-6), Cablesharingfür KDV 500m (unbestückt) Artikel 0.1702-45, KDVS Schlitten Artikel 0.1702-60/61 u. 0.1702-65 sowie AP-Wandverteiler 0.1703-01
KDV 500m Einsatz 2x Cat 5 8(4) 0.1702-51 10
KDV 500m Einsatz 2x Cat 3 8(4)Nach- bzw. Umrüsteinsatz 2 x RJ45 8(4) Cat 3 Beschaltung ISDN(4-5/3-6), Cablesharingfür KDV 500m (unbestückt) Artikel 0.1702-45, KDVS Schlitten Artikel 0.1702-60/61 u. 0.1702-65 sowie AP-Wandverteiler 0.1703-01
KDV 500m Einsatz 2x Cat 3 8(4) 0.1702-52 10
KDV 500m Einsatz TVnachrüstbar aufsteck- und danach einschraubbarer Wechseleinsatz für KDV 500m (unbestückt) Artikel 0.1702-45, KDVS Schlitten Artikel 0.1702-60/61 u. 0.1702-65 sowie AP-Wandverteiler 0.1703-01, durch die Transformation des unsymetrischen 75 Ohm TV Signals auf ein symtrisches Signal mmit einer Impedanz von 100 Ohm, ermöglicht die Übertragung mit Ethernet-Kabel
KDV 500m Einsatz TV 0.1702-75 1
10
kOmOs DataprODucts -a strOnG family fOr the future
One Basic System of Socket Body and DataRing plus
numerous InsertsData inserts tV Gesture
OperatinG ele-ment fOr cOntrOl
2x Cat 6A 1x TV | 1x Cat 6A 1x gesture insert
1x Cat 6A | 2x Cat 5 1x TV | 2x Cat 5
1x Cat 6A | 2x Cat 3
4x Cat 5
2x Cat 5 | 2x Cat 3
4x Cat 3
11
KDD
kOmOs DataprODucts -a strOnG family fOr the future
A Groundsystem from Distribution
plus numerous Inserts19 sliDe 8 sliDe
8 sliDe ap Wall sWitchBOarD
2 sliDe
Data inserts tV1x Cat 6A 1x TV
2x Cat 5
2x Cat 3
KDD & KDVA family with 2 sides and common strenghts
Flexible
Solution-oriented
Electrician-friendly
YInnovative
Unprecedentedly
Unique in the market
Powerful
12
complexl
KDV
New:
KOMOS data technology TV
With these unique components, TV signals can be sent over the network.As a result, the structured building cabling can be greatly simplified. In addition, no additional costs are incurred by the installation of coaxial cables.
short explanation:The transformation of the Unsymmetrical 75 ohms TV sig-nal to a symmetrical signal with an impedance of 100 ohms allows the transmission with Ethernet cable. In addition to the Balun system, the building cabling from KOMOS data socket and KOMOS data distributor offers a wide range of application possibilities and adaptations. Thus it is possible to restructure the multimedia connections without reinstall-ing.
KOMOS data technology TV module:Connection of two Ethernet (recommendation Cat 7) cables to KOMOS ring. First cable transmits TV signal, second cable transmits either 2x Cat 5 signal or 1x Cat 6A signal depending on module
KOMOS data technology TV distributor:Connection from an Ethernet cable to patch. Transmis-sion of the TV signal to the second position in the system. For second connection, further KOMOS is TV module e.g. socket (article-No. 0.1602-50) with KOMOS TV insert 1x TV + 1 Cat 6A (article-No. 0.1602-74).
13
image 0.1602-74
image 0.1602-75
image 0.1702-75
The following standards can be transferred:- DVB -C (cable-TV)- DVB -T (terrestrial TV)- DVB -T2 (terrestrial TV)- DVB -S (satellite-TV)- DVB -S2 (satellite-TV)- DVB-I (internet TV)
New:
KOMOS data technology TV
possibilities for using
cable TV | DVB-C
satellite TV | DVB-S with use of a head-end station
DVB -T2 -TV, former DVB-T
KOMOS data socket
Patch Panel KOMOS data distributor
TV
Push On Adapter
house connection
television-/data connection
amplifer
router
roof antenna
window antenna
indoor antenna
distributor
satellite dish with LNB
head-end station
data cable
coaxial cable
21
45678
3
9ABCDE
14
KOMOS data connection technology Cat 6
A /class E
A (500MHz)
connection sockets 10GBASE-T GHMT certified
KOMOS-Nr. PU
KDD 500 8/8 (8) AP Cat 6A /class EAModule socket KDD 500 CAT 6A / EA AP complete with Busch - Jaeger surface-mounted Cup and plate 80 x 80 mm Central plate 50 x 50 mm with dust co-ver, optional suitable for central record of all common switch manufacturer (switch program compatible) easy connection by LSA ring technology, printing according to EIA / TIA 568A, mounting a DIN rail adapter optional
KDD 500 8/8 (8) AP pure white (similar RAL 9010) 0.1602-41BG 10
KDD 500 8/8 (8) AP pearl white (similar RAL 1013) 0.1602-41AG 10
KDD 500 8/8 (8) UP Cat 6A /class EAModule socket KDD 500 CAT 6A / EA AP complete with plate 80 x 80 mm Central plate 50 x 50 mm with dust cover, optional suitable for central record of all common switch manufacturer (switch program compatible) easy connection by LSA ring technology, printing according to EIA / TIA 568A
KDD 500 8/8 (8) UP pure white (similar RAL 9010) 0.1602-31BG 10
KDD 500 8/8 (8) UP pearl white (similar RAL 1013) 0.1602-31AG 10
KDD 500 8/8 (8) KB Cat 6A /class EAModule socket KDD 500 CAT 6A / EA AP only with plate 50 x 50 mm with dust cover, optional suitable for central record of all common switch manufacturer (switch program compatible) easy connection by LSA ring technology, printing according to EIA / TIA 568A
KDD 500 8/8 (8) KB pure white (similar RAL 9010) 0.1602-21BG 10
KDD 500 8/8 (8) KB pearl white (similar RAL 1013) 0.1602-21AG 10
KDD 500 8/8 (8) KBO Cat 6A /Klasse EAModule socket KDD 500 Cat 6A /EA KB without Central plate /plate, suitable for central record of all common switch manufacturer (switch program compatible) , design capabilityeasy connection by LSA ring technology, printing according to EIA / TIA 568A
KDD 500 8/8 KBO 0.1602-11OO 10
15
image 0.1602-41BG
image 0.1602-31BG
image 0.1602-21BG
KOMOS-Nr. PU
KDD 500 basic modulBasismodul consisting of socket body and wiring ring (printing according to EIA / TIA 568A) and worksite coverage.
only in connection with individual moduls 0.1602-52, 0.1602-53, 0.1602-56, 0.1602-54, 0.1602-55, 0.1602-74 and 0.1602-75 available.
basic modul 0.1602-50 10
KDD 500 8/8 (8) insert Cat 6A /cl. EAKDD 500 8/8 (8) insert Cat 6A /class EA to installation in KDD 500 basic modul
KDD 500 8/8 (8) application Cat 6A / class EA 0.1602-51 10
KDD 500 CS X/X/X/XKDD 500 Cablesharing insert 4 x Cat.5 8(4) wiring ethernet (1-2/3-6), or 4 x Cat 3 8(4) wiring ISDN(4-5/3-6) or 2 x Cat.5 8(4) wiring ethernet (1-2/3-6) and 2 x Cat 3 8(4) wiring ISDN(4-5/3-6) to insatallation in KDD 500 basic modul or replacement of exisiting KDD 500 modules
KDD 500 CS 5/5/5/5 0.1602-52 10
KDD 500 CS 3/3/3/3 0.1602-53 10
KDD 500 CS 5/5/3/3 0.1602-56 10
KDD 500 CS 6A /cl. EA /5/5KDD 500 Cablesharing insert 1 x Cat 6A / Klasse EA 8(8), 2 x Cat. 5 8(4) wiring ethernet (1-2/3-6), to installation in KDD 500 basic modul or replacement of exisiting KDD 500 modules
KDD 500 CS 6A /class EA /5/5 0.1602-54 10
KDD 500 CS 6A /cl. EA /3/3KDD 500 Cablesharing insert 1x Cat 6A / Klasse EA 8(8) , 2 x Cat. 3 8(4) wiring ISDN(4-5/3-6), o installation in KDD 500 basic modul or replacement of exisiting KDD 500 modules
KDD 500 CS 6A /class EA /3/3 0.1602-55 10
KOMOS data connection technology Cat 6
A /class E
A (500MHz)
connection sockets 10GBASE-T GHMT certified
16
image 0.1602-56
KOMOS data connection technology Cat 6
A /class E
A (500MHz)
connection sockets 10GBASE-T GHMT certified
KOMOS-Nr. PU
KDD 500 CS 5/5/TV insertKDD 500 8/8(8)RJ45 Cat 6A (ISO/IEC) 500MHz 10 Gigabit/ TV KDD 500 insert or KDD 500 insert CS 2x Cat5 8(4)RJ45 / 1xTV, upgradeable plug-in-able and then screwable interchangeable insert for KDD 500 article, Cablesharing CS site: wiring ethernet (1-2/3-6), TV site: the transformation of the unbalanced 75 Ohm TV signal to a balanced signal with a 100 Ohm impedance allows transmission with Ethernet cable.
KDD 500 8/8(8) Cat 6A/TV Einsatz 0.1602-74 1
KDD 500 CS 5/5/TV application 0.1602-75 1
KDD 500 plateplate 80x80 mm
pearl white (similar RAL 1013) 0.1601-53AG 10
pure white (similar RAL 9010) 0.1601-53BG 10
KDD 500 central platecentral plate 50x50 mm for KDD 500 insert 8/8(8) Cat 6A,class EA with integrated dust cover and viewing window for label; via intermediate ring suitable for many common switch programs
pearl white (similar RAL 1013) 0.1601-52AG 10
pure white (similar RAL 9010) 0.1601-52BG 10
KDD 500 central plate CS 5/5/5/5central plate 50x50 mm for KDD 500 insert 4x Cat 5, with variants of printing and viewing window for label; via intermediate ring suitable for many common switch programs
pearl white (similar RAL 1013) 0.1601-58AG 10
pure white (similar RAL 9010) 0.1601-58BG 10
KDD 500 central plate CS 3/3/3/3central plate 50x50 mm for KDD 500 insert 4x Cat 3, with variants of printing and viewing window for label; via intermediate ring suitable for many common switch programs
pearl white (similar RAL 1013) 0.1601-56AG 10
pure white (similar RAL 9010) 0.1601-56BG 10
17
image 0.1601-53BG
image 0.1601-52BG
image 0.1601-58BG
image 0.1601-56BG
image 0.1602-74
KOMOS-Nr. PU
KDD 500 central plate CS Cat 6A/5/5central plate 50x50 mm for KDD 500 insert 1x Cat 6A/class EA 8(8) and 2x Cat 5 8(4), with variants of printing and viewing window with label
pearl white (similar RAL 1013) 0.1601-57AG 10
pure white (similar RAL 9010) 0.1601-57BG 10
KDD 500 central plate CS Cat 6A/3/3 or Cat 6A/TV
central plate 50x50 mm for KDD 500 insert 1x Cat 6A/class EA 8(8) and 2x Cat 3 8(4) or insert 1x Cat6A/class EA 8(8) and TV, with variants of printing and viewing window with label
Cat 6A/3/3 pearl white (similar RAL 1013) 0.1601-55AG 10
Cat 6A/3/3 pure white (similar RAL 9010) 0.1601-55BG 10
Cat 6A/TV pearl white (similar RAL 1013) 0.1601-74AG 10
Cat 6A/TV pure white (similar RAL 9010) 0.1601-74BG 10
KDD 500 central plate CS 5/5/3/3central plate 50x50 mm for KDD 500 insert 2x Cat 5 8(4) and 2x Cat 3 8(4), with variants of printing and viewing window with label
pearl white (similar RAL 1013) 0.1601-59AG 10
pure white (similar RAL 9010) 0.1601-59BG 10
KDD 500 central plate CS 5/5/TVcentral plate 50x50 mm for KDD 500 insert 2x Cat 5 8(4) and 1x TV with variants of printing and viewing window label
pearl white (similar RAL 1013) 0.1601-75AG 1
pure white (similar RAL 9010) 0.1601-75BG 1
KDD 500 worksite coverageworksite coverage 80x80 mm to cover the wired socket body or KDD 500 KBO to protection against pollution.
KDD 500 worksite coverage 0.1601-54 10
KOMOS data connection technology Cat 6
A /class E
A (500MHz)
connection sockets 10GBASE-T GHMT certified
18
image 0.1601-57BG
image 0.1601-55BG
image 0.1601-59BG
image 0.1601-75BG
KOMOS-Nr. PU
KDV 500m patchpanel Cat 6A / class EA (500MHz)modular, extendable 19 „patch for / 24-Port RJ 45 CAT 6A / class EA (500 MHz), with retractable connection field (against accidental slide out of the patch cords), modules individually interchangeable, LSA - connection technology, PCB printing blocks according to EIA / TIA 568A, integrated cable clamp, front panel RAL 7035, including 19“ fasteners, cable ties, and grounding
loaded with 24 KDV 500m Cat 6A /class EA 0.1702-41 1
unloaded 0.1702-45 1
KDV 500m 8 slidewith LSA PCB blocks and cablemanagement, printiing according to EIA/TIA 568A, unloaded, for max. 8 x KDV 500m inserts 0.1702-50/51/52/75
without top hat rail adapter 0.1702-60 1
with 2 top hat rail adapter 0.1702-61 1
KDWV 500m AP wall switchboardmade of sheet steel anodised, colour RAL 7035, wall mounting, WxHxD 150x 35x 170 mm, loaded with KDV 500m 8 slide with LSA PCB blocks and cable maanagement, printing according to EIA / TIA 568A, unloaded, for max. 8 x KDV 500m inserts 0.1702-50/51/52/75
unloaded 0.1703-01 1
KDVS 500m 2 slidewith LSA PCB blocks and cable managment, printing according to EIA/TIA 568A, unloaded, for max. 2 x KDV 500m inserts 0.1702-50/51/52/75
unloaded 0.1702-65 1
KOMOS data connection technology Cat 6
A /class E
A (500MHz)
connection sockets 10GBASE-T GHMT certified
19
image 0.1702-45
image 0.1702-60
KOMOS-Nr. PU
KDV 500m insert Cat 6A /class EA (500MHz)upgrade kit or conversion kit 1x RJ45 8(8) Cat 6A /Klasse EA (500MHz), for KDV 500m (unloaded) Artikel 0.1702-45, KDVS slide article 0.1702-60/61 & 0.1702-65 as well as AP wall switchboard 0.1703-01
pearl white (similar RAL 1013) 0.1702-50 10
KDV 500m insert 2x Cat 5 8(4)upgrade kit or conversion kit 2 x RJ45 8(4) Cat 5 wiring ethernet (1-2/3-6), Cablesharingfor KDV 500m (unloaded) article 0.1702-45, KDVS slide article 0.1702-60/61 & 0.1702-65 as well as AP wall switchboard 0.1703-01
KDV 500m insert 2x Cat 5 8(4) 0.1702-51 10
KDV 500m insert 2x Cat 3 8(4)upgrade kit or conversion kit 2 x RJ45 8(4) Cat 3 wiring ISDN(4-5/3-6), Cablesharingfor KDV 500m (unloaded) article 0.1702-45, KDVS slide article 0.1702-60/61 & 0.1702-65 as well as AP wall switchboard 0.1703-01
KDV 500m insert 2x Cat 3 8(4) 0.1702-52 10
KDV 500m insert TVupgradeable plug-in-able and then screwable interchangeable insert for KDV 500m (unloaded) article 0.1702-45, KDVS slide article 0.1702-60/61 & 0.1702-65 as well as AP wall switchboard 0.1703-01the transformation of the unbalanced 75 Ohm TV signal to a balanced signal with a 100 Ohm impedance allows transmission with Ethernet cable.
KDV 500m insert TV 0.1702-75 1
KOMOS data connection technology Cat 6
A /class E
A (500MHz)
connection sockets 10GBASE-T GHMT certified
20
Wir sind ein mittelständiges Fa-milienunternehmen, in dem
die Werte Zuverlässigkeit und Kun-denorientierung täglich gelebt werden.
We are a medium sized, family run company that places its
core values of reliability and customer orientation at the center of its everyday business.
KOMOS GmbHBahnhofstraße 207616 BürgelTelefon: +49 (0) 36692 49011Telefax: +49 (0) 36692 49055Mail: [email protected]: www.komos.de
Made in Germany