rigid sterilization containers 101 –the basics · • remove posts/dividers if interfere with...
TRANSCRIPT
3M Sterile U Webinar 8.18.11 8/18/2011
1
3M™ Sterile U Network3M™ Sterile U Web Meeting – August 18, 2011
© 3M 2011. All Rights Reserved.1
Rigid Sterilization Containers 101– The Basics
Today’s meeting times: 9:00 a.m., 11:00 a.m. and 1:00 p.m. CST
Welcome!Topic: Rigid Sterilization Containers 101 – The Basics
Facilitators: Dorothy Larson, 3MDianne Koch, 3M
Speaker: Martha Young
© 3M 2011. All Rights Reserved.2
Housekeeping• Questions
• Mute feature (*7 = unmute; *6 = mute)
• “Chat” feature
• Technical difficulties
• Post session follow-up
For more information: www.3M.com/3MSterileU
How do I get a CE Certificate?
Next week, all of today’s meeting participants will be sent an email containing instructions for obtaining a CE Certificate for today’s meeting.
The email will be sent to the email address you provided
© 3M 2011. All Rights Reserved.3
when you logged-in to today’s meeting. If there are others listening with you today who did not log-on, you may forward the CE certificate email to them.
3M Sterile U Webinar 8.18.11 8/18/2011
2
Disclosure Statement
Martha Young, MS, BS, CSPDT
Martha L. Young, LLC
Retired from 3M
Consultant for 3M
marthalyoung1@aol com
© 3M 2011. All Rights Reserved.4
Learning Objectives
Describe the best practices for cleaning, packaging, preparation, loading, and storage of medical devices using rigid sterilization containers.
Explain AAMI guidance on prepurchase evaluation of rigid
© 3M 2011. All Rights Reserved.5
p g p p gsterilization containers.
Discuss AORN guidelines on the use of rigid containers for immediate-use steam sterilization (IUSS).
Reusable Rigid Sterilization Containers
• Box-like structures with sealable and removable lids
• Inner basket to hold instruments
• Outer container is protective barrier
• Uses valves and filters to allow sterilant to enter but not microorganisms
© 3M 2011. All Rights Reserved.6
• Inner basket and outer container have handles to make them easy to carry
• Available in many sizes and designs
• Constructed of anodized aluminum, stainless steel, high-temperature plastics, fiber glass, or a combination of these
• Baskets have instrument posts and dividers to organize instruments
Rigid Container Systems (Part I), IAHCSMM Communique: July/August 2010
3M Sterile U Webinar 8.18.11 8/18/2011
3
• Training required• Cleaning method• Sterilization method• Packaging manufacturer’s test data and IFUs • Base packaging procedure and policy on the manufacturer’s written
Reusable Rigid Sterilization Containers
© 3M 2011. All Rights Reserved.7 ANSI/AAMI ST79:2010 Section 8.2
p g g p p yIFU
• Competency testing
Medical Device Manufacturer
• “The written instructions of the device manufacturer should always be followed.”
• “The reusable medical device manufacturer is responsible for ensuring that the device can be effectively cleaned and
© 3M 2011. All Rights Reserved.8
g ysterilized.”
• “The device labeling should identify specific methods of cleaning and sterilization that have been validated by the manufacturer.”
ANSI/AAMI ST79:2010 Section 7.2.2
Cleaning and Inspection
© 3M 2011. All Rights Reserved.9
g p
• ANSI/AAMI ST79:2010
• Section 8.1 to 8.4.5
3M Sterile U Webinar 8.18.11 8/18/2011
4
Cleaning of Reusable Rigid Sterilization Containers
• Remove lid
• Remove all disposable filters and discard
• Remove filter protector/holder or retention plate from both ends
• Valve type closures (reusable filters) must be cleaned
© 3M 2011. All Rights Reserved.10
• Valve-type closures (reusable filters) must be cleaned according to IFU• Usually remove and disassemble for cleaning
• Remove interior baskets
• Remove CIs, disposable labels, locks
• Remove posts/dividers if interfere with cleaningRigid Container Systems (Part II), IAHCSMM Communique: September/October 2010
Cleaning of Reusable Rigid Sterilization Containers
• Follow manufacturer’s IFUs for cleaning agents, tools, methods, and rinsing• Cleaning agent
• Some cannot be exposed to certain chemicals such as high alkaline solutions
© 3M 2011. All Rights Reserved.11
• Follow instructions for loading containers into mechanical cleaning equipment• TJC wants these taken apart for cleaning*
Rigid Container Systems (Part II), IAHCSMM Communique: September/October 2010,*Joint Commission Perspectives®, July 2009, Vol. 29, Issue 7. Copyright 2009 Joint Commission on Accreditation of Healthcare Organizations, and personal communications with hospitals that have had surveys
• Check latching mechanism or closure to make sure it is functioning properly and remains secure
• The sealing or mating surfaces should not be dented or chipped
• Screws and rivets on filter retention mechanisms and
Inspection of Reusable Rigid Sterilization Containers
© 3M 2011. All Rights Reserved.12
Screws and rivets on filter retention mechanisms and fasteners should be secure, not distorted or burred orpenetrate the surface of the lid
• The reusable filter media should be examined for integrity• Discard if damaged or if recorded removal date is near
• Gasket should be pliable, securely fastened, no breaks or cutsANSI/AAMI ST79:2010 Section 8.4.3 and Section 8.4.4
3M Sterile U Webinar 8.18.11 8/18/2011
5
© 3M 2011. All Rights Reserved.13
What is wrong with this picture?
Poor loading technique in mechanical washing equipment - need to disassemble reusable rigid containers (remove disposable filter
retentions plates) so all surfaces are exposed to the cleaning process.
Packaging and Preparation
© 3M 2011. All Rights Reserved.14
Packaging and Preparation
• ANSI/AAMI ST79:2010
• Section 8.1 to 8.4.5
• Follow the reusable rigid sterilizer container manufacturer’s instructions for set preparation and assembly
• Place instruments in a basket of adequate size that has been validated by the manufacturer
• Do not exceed more than 25 pounds of weight (contents plus
Loading Instruments Into Reusable Rigid Sterilization Containers
© 3M 2011. All Rights Reserved.15
container weight)
• Employee safety
• Effect on sterilization and drying
• Use only non-woven filters validated for this use and visually inspect for holes before use
ANSI/AAMI ST79:2010 Section 8.4.1, 8.4.2, 8.4.4 Rigid Container Systems (Part II) IAHCSMM Communique: September/October 2010
3M Sterile U Webinar 8.18.11 8/18/2011
6
• Remove excess moisture from cleaning and rinsing of instruments using filtered, medical-grade, compressed air
• Jointed instruments should be open or unlocked with ratchets not engaged
• Racks, pins, stringers and other devices can be used to hold
Loading Instruments Into Reusable Rigid Sterilization Containers
© 3M 2011. All Rights Reserved.16
instruments in the open position
• Multipart instruments should be disassembled
• Position to allow sterilant to come into contact with all surfaces and water to drain from concave surfaces
• Do not hold instruments together with rubber bands
• Heavy instruments placed so do not damage delicate items
ANSI/AAMI ST79:2010 Section 8.4.4
Contain all items in the basket or tray within the container system “Small, basket-type accessory containers with covers or lids
(e.g., nail or bone-screw holders), protective organizing baskets, trays, or cases, (e.g., microsurgery instrument cases,
Loading Instruments Into Reusable Rigid Sterilization Containers
© 3M 2011. All Rights Reserved.17
baskets, trays, or cases, (e.g., microsurgery instrument cases, air-powered equipment sets, orthopedic instrument organizing sets) should be placed into rigid sterilization container systems onlyif the container systems have been specifically designed and tested for this purpose.”
ANSI/AAMI ST79:2010 Section 8.4.4
• “Paper-plastic pouches are not appropriate for use within wrapped sets or containment devices.”
Loading Instruments Into Reusable Rigid Sterilization Containers
© 3M 2011. All Rights Reserved.18 ANSI/AAMI ST79:2010 Section 8.3.4
3M Sterile U Webinar 8.18.11 8/18/2011
7
Chemical Indicator Placement
•Rigid container• Place two CIs inside rigid
containers
• Place one in each of two opposite corners
© 3M 2011. All Rights Reserved.19
• Or follow manufacturer’s IFUs
AORN Recommended Practices for Selection and Use of Packaging Systems for Sterilization, Recommendation IX
Chemical Indicator Placement
Multi-layer rigid container• Place two CIs in each
level of multi-level rigid container
© 3M 2011. All Rights Reserved.20
• Place one in each of two opposite corners on each level
AORN RP for Selection and Use of Packaging Systems for Sterilization (2011) Recommendation IX
Chemical Indicator Placement
Multi-layer rigid container• Place two CIs in each level
of multi-level rigid container
© 3M 2011. All Rights Reserved.21
• Place one in each of two opposite corners on each level
AORN RP for Selection and Use of Packaging Systems for Sterilization (2011) Recommendation IX
3M Sterile U Webinar 8.18.11 8/18/2011
8
Chemical Indicator Placement
Multi-layer rigid container• Place two CIs in each level
of multi-level rigid container
© 3M 2011. All Rights Reserved.22
• Place one in each of two opposite corners on each level
AORN RP for Selection and Use of Packaging Systems for Sterilization (2011) Recommendation IX
Sterilizer Loading, Sterilization Parameters Sterilizer Unloading
© 3M 2011. All Rights Reserved.23
Parameters, Sterilizer Unloading
• ANSI/AAMI ST79:2010
• Section 8.5
Correct or Incorrect Loading?
© 3M 2011. All Rights Reserved.24
Incorrect: Reusable rigid sterilization containers and instrument set on edge, packed too tightly.
3M Sterile U Webinar 8.18.11 8/18/2011
9
• Place on shelf below absorbent items to prevent wetting of absorbent items by condensate
• Do not stack unless validated and recommended by MDM
Correct Sterilizer Loading for Reusable Rigid Containers
© 3M 2011. All Rights Reserved.25
y
• Do not stack containers from different MDM because the configurations might not be compatible which could effect air removal and steam penetration
• Place instrument sets (including containers) flat on shelf
ANSI/AAMI ST79:2010 Section 8.5.3 and 8.5.6
Incorrect loading of sterilizer• “Stacking of containment devices if not recommended by manufacturer
• Stacking of perforated instrument trays
• Incorrect placement of instrument trays (i.e., not laying instrument
Table 8 Checklist for Identifying Reasons for Steam Sterilization Process Failures
© 3M 2011. All Rights Reserved.26
trays flat or parallel to the shelf)
• Incorrect placement of paper-plastic pouches (e.g., placing pouches flat instead of on edge; not allowing sufficient space between pouches; not placing pouches with plastic sides facing one direction)”
ANSI/AAMI ST79:2010 Section 10.7.5
• Choose based on the written IFUs from the• Medical device manufacturer
• Packaging manufacturer
• Sterilizer manufacture
Sterilization Parameters
© 3M 2011. All Rights Reserved.27
• Investigate and resolve if the parameters do not agree
“NOTE─Care should be taken to ensure that all devices in a load have the same exposure time, as specified in the device manufacturers’ written instructions.”
ANSI/AAMI ST79:2010 Section 8.6
3M Sterile U Webinar 8.18.11
10
• Maintain items on sterilizer cart until adequately cooled
• Do not touch during the cooling process
• Could wick bacteria from hands into packaging
• Place sterilizer cart in a low traffic area, no air-conditioning or cold-air-t
Unloading
© 3M 2011. All Rights Reserved.28
vents
• Do not transfer warm items to a cool cart which could result in condensate forming and contamination
• May open door slightly at end of cycle to reduce the potential for condensation formation
“Flash-sterilized items are to be used immediately, not stored for later use.”
ANSI/AAMI ST79:2010 Section 8.8
Sterile Storage
© 3M 2011. All Rights Reserved.29
g
• ANSI/AAMI ST79:2010
• Section 8.9
Store sterilized items in a separate area until distributed for patient care use. Environmental conditions for sterile storage include:• Controlled temperature 24°C (75°F)• ≥ four air exchanges/hour
Quality in the Sterile Storage Area
© 3M 2011. All Rights Reserved.30 ANSI/AAMI ST79:2010 Sections 3.3.7.4 and 8.9.2
• ≥ four air exchanges/hour• Relative humidity not to exceed 70%• Controlled traffic • Positive air flow (out)
3M Sterile U Webinar 8.18.11 8/18/2011
11
Inventory is protected from contamination• Store at least 8–10” from the floor, 18” below ceilings and 2” from
outside walls
• Storage on carts or shelves
• Cleanliness standards
Quality in the Sterile Storage Area
© 3M 2011. All Rights Reserved.31 ANSI/AAMI ST79:2010 Section 8.9.2
• Solid bottom shelf
• Store so not crushed, bent, compressed
• Stack containers if recommended by MDM
• Store heavy instrument trays in middle shelves for ease of handling and do not stack
Correct or Incorrect Storage of Reusable Rigid Sterilization Containers?
© 3M 2011. All Rights Reserved.32
Incorrect: Containers may be stacked if recommended by the manufacturer, but they cannot be placed on edge.
Prepurchase Evaluation
© 3M 2011. All Rights Reserved.33
• ANSI/AAMI ST79:2010
• Section 10.10.3.2
3M Sterile U Webinar 8.18.11 8/18/2011
12
• Conduct a pre-purchase evaluation to determine if in your sterilizer chamber
• Air can be removed from the container
Prepurchase Evaluation of Reusable Rigid Container Systems
© 3M 2011. All Rights Reserved.34
• Adequate steam can penetrate the container
• The sterilizer and container design system will achieve sterilization
• The sterilizer and container design will permit adequate drying and promote sterility maintenance
ANSI/AAMI ST79:2010 Section 10.10.3.2
Prepurchase Evaluation of Reusable Rigid Container Systems• Test system should contain largest instrument set
(including optional absorbent material)
• Containers should represent the sizes that will be used routinely
• Filter, if required, must be in place
© 3M 2011. All Rights Reserved.35
• Consult container manufacturer for recommended BI and CI placement
• Maximum-load and small-load test are run in representative sterilizers (dynamic-air-removal and gravity)• Number of trays/load and placement will depend on type of
sterilizer and size of chamber
ANSI/AAMI ST79:2010 Section 10.10.3.2
Evaluation of New Packaging
© 3M 2011. All Rights Reserved.36
• ANSI/AAMI ST79:2010
• Section 10.10.3.2
3M Sterile U Webinar 8.18.11 8/18/2011
13
“Product testing should always be performed when major changes are made in packaging, wraps, or load configuration, such as dimensional changes, weight changes, or changes in the type or material of packaging or wrapper.”*
• This would include small, basket-type accessory containers with covers or lids, protective organizing baskets, trays, or cases, foam,
Evaluation of New Packaging
© 3M 2011. All Rights Reserved.37
AORN Recommended Practices for Selection and Use of Packaging Systems for Sterilization:2011 Recommendation X 1. *ANSI/AAMI ST79:2010 Section 11.2.2
, p g g , y , , ,paper/paper pouches, etc.
• Place multiple BIs and CIs into area of packages determined to be the greatest challenge• Corners• Different layers• Next to the heat sink (metal mass)• Inside accessory containers
• Test results
• Results determine routine placement of BI and CI
• Examine for evidence of excess moisture
Product Testing
© 3M 2011. All Rights Reserved.38
• Inside accessory containers
• Label as product testing• Place in full load• Run the appropriate cycle• Document
• Date testing performed• Name of set, tray or item• Placement of all BIs and CIs (photo)
AAMI ST79:2010 Section 10.9
Product Testing Performed and All Monitors Stated the Sterilization Process was Effective
Can You Make this Packaging Change?
© 3M 2011. All Rights Reserved.39
No, Unless the manufacturer(s) provides validated, written instructions for this packaging technique. This change cannot be done based on the results of
product testing.
3M Sterile U Webinar 8.18.11 8/18/2011
14
• Is there a risk of a patient acquiring an infection if the manufacturer’s instructions for use are not followed?• Cleaning, packaging, and sterilization
• Have you done a risk analysis for sterilization process
Risk Analysis
© 3M 2011. All Rights Reserved.40
y y pfailures?
Standard IC.01.03.01
“The hospital identifies risks for acquiring and transmitting infections.”
Element of Performance # 4
The Joint Commission (TJC)
© 3M 2011. All Rights Reserved.41
Element of Performance # 4
“The hospital reviews and identifies its risks at least annually and whenever significant changes occur with input from, at a minimum, infection control personnel, medical staff, nursing, and leadership.”
41The Joint Commission: 2011 Hospital Accreditation Standards (HAS)
Validation vs. Verification
© 3M 2011. All Rights Reserved.42
They Are Not The Same
3M Sterile U Webinar 8.18.11 8/18/2011
15
“Documented procedure for obtaining, recording, and interpreting the results required to establish that a process will consistently yield product complying with predetermined specifications.”
Validation
© 3M 2011. All Rights Reserved.43
• Covers three activities: installation qualification, operational qualification, and performance qualification
• Performed by device manufacturer
• Users cannot conduct validation testing
ANSI/AAMI ST79:2010 Section 2.129
• Sterilization efficacy testing is expensive and time-consuming
• Manufacturer selects most challenging product (master product) in product family to test
• Biological testing is done in half cycle, fractional cycles, or
Manufacturer Validation
© 3M 2011. All Rights Reserved.44
incremental critical process parameter cycles using BI spore strips, inoculated threads, or direct inoculation
ANSI/AAMI ST77:2006 Section 5.6
• Internal temperature mapping is done inside containers or other packaging using multiple calibrated temperature sensors (Section 5.6)
• Sterilant residual removal (Section 5.8)
Manufacturer Validation
© 3M 2011. All Rights Reserved.45
( )
• Perform sterility maintenance testing, microbial challenge testing, and physical integrity tests to determine if sterility is maintained until the device is opened for use (Section 5.9)
• Repeat validation testing when design changes are made on device
ANSI/AAMI ST77:2006
3M Sterile U Webinar 8.18.11 8/18/2011
16
“Documented procedures, performed in the user environment, for obtaining, recording, and interpreting the results required to establish that predetermined specifications have been met.”
• AAMI product testing verifies the validated instructions provided b th d i f t
User Verification
© 3M 2011. All Rights Reserved.46
by the device manufacturer
• Product testing does not allow a user to validate a change in the product instructions for use as received from the device manufacturer
• Packaging, sterilization time, etc.
ANSI/AAMI ST79:2010 Section 2.128, Section 10.9
“The reusable medical device manufacturer is responsible for ensuring that the device can be effectively cleaned and sterilized.”
“The written instructions of the device manufacturer should
Reduce Risk
© 3M 2011. All Rights Reserved.47
always be followed.”
ANSI/AAMI ST79:2010 Section 7.2.2
Can You Make this Packaging Change?
© 3M 2011. All Rights Reserved.48
No, Unless the manufacturer(s) provides validated, written instructions for this packaging technique. This change cannot be done based on the results of
product testing.
3M Sterile U Webinar 8.18.11 8/18/2011
17
Reusable Rigid Containers for Immediate-Use Steam Sterilization (IUSS)
© 3M 2011. All Rights Reserved.49
( )
• AORN Recommended Practices for Sterilization in the Perioperative Practice Setting:2011
• Section IV.d. and IV.e.
• AORN recommends the use of rigid sterilization containers designed and intended for IUSS
• Reduce risk of contamination during transport to point of use
Implementation of ReusableRigid Containers for IUSS
© 3M 2011. All Rights Reserved.50
transport to point of use
• Ease of presentation to sterile field
• Container should be opened, used immediately, and not stored for later use
• Containers should be differentiated from other types of containers
AORN RP for Sterilization in the Perioperative Practice Setting, RP IV.e
Immediate-Use Steam Sterilization
•Aseptic transfer from the sterilizer to the point of use is critical to protect items from contamination.
•Minimize exposure to air and other environmental contaminates
•Use single wrappers or containers for transport
•Not to be stored for future use
© 3M 2011. All Rights Reserved.51
•Not held from one case to another
•Follow the device manufacturer’s IFU
•If they are not compatible with the packaging manufacturer's IFU (rigid container) then contact the device manufacturer to resolve the issue
http://www.aami.org/publications/standards/ST79_Immediate_Use_Statement.pdf
3M Sterile U Webinar 8.18.11 8/18/2011
18
Immediate-Use Steam Sterilization
Use critical thinking skills
Be knowledgeable about evidence-based recommended practices and standards (AAMI, AORN, CDC)
Appropriate training and education
Certification
© 3M 2011. All Rights Reserved.52
Certification
Do not process implants by immediate-use steam sterilization
http://www.aami.org/publications/standards/ST79_Immediate_Use_Statement.pdf
The Joint CommissionUpdated Position on Steam Sterilization
• Storage and return to the sterile field• Are instruments protected from recontamination
when returned to sterile field?
© 3M 2011. All Rights Reserved.53
The Joint Commission Perspectives®, July 2009, Volume 29, Issue 7http://www.jcrinc.com/common/PDFs/fpdfs/pubs/pdfs/JCReqs/JCP-07-09-S8.pdf
Any Questions or Comments?
© 3M 2011. All Rights Reserved.54
3M Sterile U Webinar 8.18.11 8/18/2011
19
Next 3M™ Sterile U Web Meeting:
• September 15, 2011
• Biological Indicators – Do
Thank you!
© 3M 2011. All Rights Reserved.55
Biological Indicators Do they make your life easier or harder?
Register at www.3m.com/SterileU/WebMeetings
Association for the Advancement of Medical Instrumentation (AAMI)
• Comprehensive guide to steam sterilization and sterility assurance in health care facilities, ANSI/AAMI ST79 2010 & A1 2010 (C lid t d T t)
Evidence-Based Guidelines
© 3M 2011. All Rights Reserved.56
ANSI/AAMI ST79:2010 & A1:2010 (Consolidated Text)
How to Purchase AAMI Standards for Your Reference Library
AAMI documents can be purchased through AAMI by credit card using the following four options:
• Internet: http://marketplace.aami.org • Call: 1-877-249-8226• Fax: 301 206 9789
© 3M 2011. All Rights Reserved.57
• Fax: 301-206-9789• Mail: AAMI Publications, P.O. Box 0211, Annapolis Junction, MD
20701-0211A free PDF of future amendment(s) may be downloaded by visiting http://www.aami.org/publications/standards/st79.html, which also includes information on how to update your copy of ST79.Print and save to your hard drive.
3M Sterile U Webinar 8.18.11 8/18/2011
20
Association of periOperative Registered Nurses (AORN) Perioperative Standards and Recommended Practices (2011)
• Recommended Practices for Practices for Sterilization in the Perioperative Practice Setting
Evidence-Based Guidelines
© 3M 2011. All Rights Reserved.58
• Recommended Practices for Selection and Use of Packaging Systems for Sterilization
How to Purchase AORN Standards for Your Reference Library
AORN Standards can be purchased through AORN using the following options:
• Internet: www.aorn.org/bookstore/ordering.htm
• Call: 1-800-755-2676 x 1 or 303-755-6304 x 1 (Monday-Friday, 8AM
© 3M 2011. All Rights Reserved.59
to 4:30PM mountain standard time)
• Fax: 303-750-3212
• By mail: AORN, Inc., Customer Service/Book Orders, 2170 South Parker Road, Suite 300, Denver, CO 80231-5711, USA
References
• Rigid Container Systems (Part I), IAHCSMM Communique: July/August 2010, accessed 8/3/2011 at http://iahcsmm.org/Recertification/LessonPlans/CIS_lessonPlans/CIS_Lessons/CIS_220.html
• Rigid Container Systems (Part II) IAHCSMM Communique:
© 3M 2011. All Rights Reserved.60
Rigid Container Systems (Part II), IAHCSMM Communique: September/October 2010, accessed 8/3/2011 at
http://iahcsmm.org/Recertification/LessonPlans/CIS_lessonPlans/CIS_Lessons/CIS_221.html
• IAHCSMM Central Service Technical Manual, 7th Edition.
• Sterile Processing University, LLC. The Basics of Sterile Processing, 3rd Edition, 2009.
3M Sterile U Webinar 8.18.11 8/18/2011
21
• Joint Commission Perspectives®, July 2009, Vol. 29, Issue 7. Copyright 2009 Joint commission on Accreditation of Healthcare Organizations accessed 8/3/2011 athttp://www.jcrinc.com/common/PDFs/fpdfs/pubs/pdfs/JCReqs/JCP-07-09-S8.pdf
References
© 3M 2011. All Rights Reserved.61
p
• Joint Commission. 2011 Hospital Accreditation Standards (HAS)
• AAMI and Multi-society Immediate-Use Sterilization Position Statemen, accessed 8/3/2011 at http://www.aami.org/publications/standards/st79.html