RECOMMENDED FOR musi-cians using guitars with active

(Humbacker) pick-ups, specificallyfor Rock music. This cable is designed

especially for pick up acoustic impe-dance. The perfect pick up-cable coupling

impedance, makes the signal reflectionsirrelevant, and produces a more linear band-

width. The result is a louder, “more powerfulsound, particularly midrangey”. “The harmonic

frequencies found in a distorted sound are cer-tainly more than those found in a “clean” sound.

It is therefore essential to have a cable which willnot soften or, worse “strip away” fundamental har-monics, something which can very well occur withan “ordinary” cable.The RIC-S01R ensures that the power and tone ofyour Rock guitar are transferred to the amplifier in allits sonic range.The sheath is made of a special mix toensure maximum flexibility without compromising theelectrical features. As for all the ReferenceLaboratory guitar cable series, the RIC-S01 R alsohas a double screen in copper besides a PVC semi-conductor. This PVC solution is ideal for avoiding thecreation of noise caused by sharp and suddenmovements during a concert, typical of live per-formances (particularly Rock performances).

The RIC-01 rock electric guitar sound checkcan be found on DVD#1.The rock electric bass guitar sound checkcan be listened to on DVD#2

Watch and listen to our DVDs on our websitewww.referencelaboratory.com or ask M.I.

shops selling Reference cables to playyou the DVD.

RIC-S01 RAPPLICATIONS: ELECTRIC GUITAR AND BASS ROCK

Where we consider it necessary we use a PVCsemi conductor, as it reduces over 95% of noise

generated by cable movement.

We accurately test all our cables

We can assemble, as requested,cables to specific lengths

●

●

●8

This is the cableI'm talking about

(RIC-S01 R). It's theonly thing I use in the

studio because it gives methe sound... that I MUST HAVE!

Rudy Sarzo

Watch the Rudy Sarzo interview onwww.referencelaboratory.com

JACK SILVER MOD. 226Available as an option Amphenol Mod. TM2P-AU-RL jackSilent Plug Neutrik

Ample solder areaLead free solder, to achieve better conductibility whilerespecting the environment

❺❻

❼

CONSTRUCTION

Inner Conductor

Insulation

Shield N.1

Shield N.2

Jacket

Available Colours

Working Temperature °C

Minimum Bending Radius

Solid Red Copper 0,5mmq AWG20

Foam PE diameter 2,6mm

PVC Semiconductor diameter 3mm

Lap - Tinned Copper - total coverage 100%

Compound PVC diameter 7.0mm

Glossy Red

-40 +80°C

8xOverall diameter

It is VERY IMPORTANT in a cabling sequence instru-ment+effects+amplifier, that the connecting cables havethe same electrical capacity parameters to obtain- LOSS+SIGNAL TRANSPARENCY

9wwwwww..rreeffeerreenncceellaabboorraattoorryy..ccoomm

●●

Ample Solder area - compact body

Diecast metal shell in nickel-plated finish

Single bodied stem-tip to allow for the maximum con-ductibility possible and to prevent the tip from becom-ing unscrewed, as a result of usage, typical of tipsattached to the stem. Standard telephone tip, to obtain a secure contact withevery female jack and also allow for a wider contactarea in comparison to other traditional tips.

REMEMBER THAT

If you use a RIC-S01 R cable make sure to also use it to connect all theeffects (pedal or rack), this will improve your sound! You can check outthe difference on DVD#1 or check the foot pedal on page 35

❺

❼

❻

JACK MOD. TM2P-AU-RL

❶

❷❸

❹

Single bodied stem-tip to allow for the maximum con-ductibility possible and to prevent the tip from becom-ing unscrewed, as a result of usage, typical of tipsattached to the stem; to avoid oxidation issues and sub-sequent reduction in conductibility, we use gold platedplugs

Diecast metal shell in satin finish with ergonomic grip

Cable clamp Patented Amphenol JAW model - used asa secure and long-lasting anchorage even at hightemperatures

Backshell in thermoplastic and the Flexible grommetcable protection in soft PVC

❶ ❸ ❹

FOR USE WITH

Guitars and Bass guitars which have pick ups which guarantee a betterperformance for rock music

SSttrraappppeerr: Made in VELCRO®,an exclusive design with elec-tro-welded loop to be assem-bled with the cable. Waterresistant; high stability coupling(does not fear dust and mud).Available in different colours toidentify the different cablelengths.

Blue = 4,5 metresRed = 6 and 20 metres

Black = 10 metresYellow = 15 metres