rgv standard model · rgv series zero-backlash positioner standard model features varied lineup of...

Dealers

http://www.sankyo-seisakusho.co.jp

* Product specifications may be changed without prior notice. Before ordering, please contact our sales department.

All patent rights and copyrights for parts of mechanisms described in this catalog andfor trademarks, images, drawings etc. belong to Sankyo Seisakusho Co.

"RollerDrive" is a registered trademark of Sankyo Seisakusho Co. in Japan.

RGV

Zero Backlash Positioner

RGV series Standard Model

Varied lineup of reduction ratios and sizes Large output torque from a compact servo motor

A mechanism developed through the pursuit of outstanding functionality and performance

The ZERO-Backlash Technology

Superior movement achievedwith zero-backlash technologyThe RollerDrive is a zero-backlash reducer that utilizes a rolling transmission method with preload adjustment for high-dimensional accuracy, responsiveness, and rigidity with stable performance over long periods. The large-diameter hole construction with a direct input/output shaft layout enables a compact design with zero backlash.Meanwhile, the rolling transmission method of the RollerDrive provides a characteristic long service life.

Positioner Lineup

Performance Comparison

For general factory automation

MRUltra-compact model

RGVStandard model

RGRLarge-diameter model

RALightweight model

RUHigh-rigidity model

For welding machines

SPStandard model

RWHigh-accuracy model

Efficiency

Backlash

DurabilityTorque

Alignmentaccuracy

RollerDrive Gear (planet, worm, etc.)

Direct drive motorBarrel

Output shaft(Turret)

Roller followersInput shaft

(Roller gear cam)

Roller followers

Cam

Input shaft



Roller followersInput shaft

(Roller gear cam)

Roller followers

Cam

Input shaft


Roller gear cam mechanism Preload mechanism

1

RGV seriesZero-backlash positioner Standard model

Features ▼ Varied lineup of reduction ratios and sizes

▼ Large output torque from a compact servo motor

▼ Capable of handling heavy and uneven loads easily

▼ Lightweight and compact

*For high gear ratio model

Servo motor

Reducer*RollerDrive main body

2

Product Code

Product Code1 RGV 2 063 - 3 072 4 G 5 T 6 A - 7 BJC

1 2 3 4 5 6 7Model Size Gear ratio Lubrication method Servomotor position Options Attachment code

RGV

040 015、045、075 G： Grease lubrication

Usable in any position/direction

For oil lubrication:1/2/3/4/5/6See oil lubrication mounting codes below

Ｔ： Standard Mounted on right side of main unit

U： Mounted on left side of main unit

Blank： None

A： Rustproof specification

B： Rustproof/dustproof/waterproof specification

See the list of mountable motors for

each size⇒ P. 13 to 22

063

012、024、036、060、072、120

080

100

125

RollerDrive components and mounting surface designations

Servomotor

Motor base

T

W

RollerDrive body

R

SV

U Reducer

W

R

SV

Servomotor

Motor base

T

RollerDrive body

U

Standard gear ratio model High gear ratio model

* Shown with servomotor on“T” surface

Oil lubrication mounting codes

1 2 3 4 5 6

W surface toward bottom V surface toward bottom U surface toward bottom T surface toward bottom R surface toward bottom S surface toward bottom

3

RGV series

Product Specifications

Grease lubrication typeModel RGV040 RGV063

Main unit gear ratio 15 12 24

Reducer gear ratio ― 3 5 ― 3 5 ― 3 5

Total gear ratio 15 45 75 12 36 60 24 72 120

Start / Stop limit torque N・m 67 64.2 109.8

Static output torque N・m 100 87 184

Maximum input speed min-1 1,800 5,400 6,000 1,200 3,600 6,000 1,600 4,800 6,000

Rated input speed min-1 900 2,700 3,000 600 1,800 3,000 800 2,400 3,000

Maximum output speed *1 min-1 120 80 100 66.7 50

Rated output speed *1 min-1 60 40 50 33.3 25

Repeatability*2 arc sec or less ± 10 ± 7

Allowable axial load (load weight) N 1,155 2,988 3,486

Allowable radial load N 766 2,642 3,082

Allowable moment load N・m 42 160 176

Weight (not including motor)*3 kg 4.3 4.9 8.3 9.7 8.3 9.7

Model RGV080 RGV100 RGV125

Main unit gear ratio 12 24 12 24 12 24

Reducer gear ratio ― 3 5 ― 3 5 ― 3 5 ― 3 5 ― 3 5 ― 3 5

Total gear ratio 12 36 60 24 72 120 12 36 60 24 72 120 12 36 60 24 72 120

Start / Stop limit torque N・m 108.6 183.8 269.5 457 453.2 771.8

Static output torque N・m 155 323 374.5 782 632 1,326

Maximum input speed min-1 1,100 3,300 5,500 1,400 4,200 6,000 1,000 3,000 5,000 1,300 3,900 6,000 900 2,700 4,500 1,200 3,600 6,000

Rated input speed min-1 550 1,650 2,750 700 2,100 3,000 500 1,500 2,500 650 1,950 3,000 450 1,350 2,250 600 1,800 3,000

Maximum output speed *1 min-1 91.7 58.3 50 83.3 54.2 50 75 50

Rated output speed *1 min-1 45.8 29.2 25 41.7 27.1 25 37.5 25

Repeatability*2 arc sec or less ±5 ±5 ±5

Allowable axial load (load weight) N 3,687 4,015 4,118 4,242 7,510 8,301

Allowable radial load N 3,192 3,546 3,496 3,741 6,624 7,321

Allowable moment load N・m 253 278 446 520 1,005 1,164

Weight (not including motor)*3 kg 15.2 16.3 15.2 16.3 26.1 29.0 26.1 29.0 44.9 48.8 44.9 48.8

*1 Contact Sankyo in the case of output with continuous rotation at 360 degrees or more.*2 Indicates the accuracy for the main unit without the reducer.*3 May vary slightly depending on reduction ratio and motor specifications.

4

Product Specifications

Oil lubrication typeModel RGV040 RGV063

Main unit gear ratio 15 12 24

Reducer gear ratio ― 3 5 ― 3 5 ― 3 5

Total gear ratio 15 45 75 12 36 60 24 72 120

Start / Stop limit torque N・m 82 79 135.2

Static output torque N・m 100 87 184

Maximum input speed min-1 2,400 6,000 2,600 6,000 2,600 6,000

Rated input speed min-1 1,200 3,000 1,300 3,000 1,300 3,000

Maximum output speed *1 min-1 160 133.3 80 216.7 166.7 100 108.3 83.3 50

Rated output speed *1 min-1 80 66.7 40 108.3 83.3 50 54.2 41.7 25

Repeatability*2 arc sec or less ±10 ±7

Allowable axial load (load weight) N 1,155 2,988 3,486

Allowable radial load N 766 2,642 3,082

Allowable moment load N・m 42 160 176

Weight (not including motor)*3 kg 4.3 4.9 8.3 9.7 8.3 9.7

Model RGV080 RGV100 RGV125

Main unit gear ratio 12 24 12 24 12 24

Reducer gear ratio ― 3 5 ― 3 5 ― 3 5 ― 3 5 ― 3 5 ― 3 5

Total gear ratio 12 36 60 24 72 120 12 36 60 24 72 120 12 36 60 24 72 120

Start / Stop limit torque N・m 133.7 226.2 331.8 562.3 557.9 950.2

Static output torque N・m 155 323 374.5 782 632 1,326

Maximum input speed min-1 2,200 6,000 2,200 6,000 2,000 6,000 2,000 6,000 1,920 5,760 6,000 1,920 5,760 6,000

Rated input speed min-1 1,100 3,000 1,100 3,000 1,000 3,000 1,000 3,000 960 2,880 3,000 960 2,880 3,000

Maximum output speed *1 min-1 183.3 166.7 100 91.7 83.3 50 166.7 100 83.3 50 160 100 80 50

Rated output speed *1 min-1 91.7 83.3 50 45.8 41.7 25 83.3 50 41.7 25 80 50 40 25

Repeatability*2 arc sec or less ±5 ±5 ±5

Allowable axial load (load weight) N 3,687 4,015 4,118 4,242 7,510 8,301

Allowable radial load N 3,192 3,546 3,496 3,741 6,624 7,321

Allowable moment load N・m 253 278 446 520 1,005 1,164

Weight (not including motor)*3 kg 15.2 16.3 15.2 16.3 26.1 29.0 26.1 29.0 44.9 48.8 44.9 48.8

*1 Contact Sankyo in the case of output with continuous rotation at 360 degrees or more.*2 Indicates the accuracy for the main unit without the reducer.*3 May vary slightly depending on reduction ratio and motor specifications.

5

RGV series

Dynamic output torqueD

ynam

ic o

utpu

t tor

que［

N・

m］

0

20

40

60

80

0 20 40 60 80 100 1200

40

20

80

60

100

120

140

0 10 20 30 6040 50

Dyn

amic

out

put t

orqu

e［N・

m］

Dyn

amic

out

put t

orqu

e［N・

m］

0

20

40

60

80

100

120

140

0 20 40 60 80 1000

50

100

150

200

250

0 10 20 30 40 50

Dyn

amic

out

put t

orqu

e［N・

m］

Dyn

amic

out

put t

orqu

e［N・

m］

0

50

100

150

200

250

300

350

0 10 20 30 40 50 60 70 80 900

100

200

300

400

600

500

0 10 20 30 40 50

Dyn

amic

out

put t

orqu

e［N・

m］

Dyn

amic

out

put t

orqu

e［N・

m］

0

100

200

300

400

500

600

0 10 20 30 40 9050 60 70 800

200

400

600

800

1,000

0 10 20 30 5040

Dyn

amic

out

put t

orqu

e［N・

m］

Dyn

amic

out

put t

orqu

e［N・

m］

Gear ratio＝12 Gear ratio＝24




0

20

40

60

80

0 10 20 30 40 50 60 70 80 90

RGV040

Output rotational frequency［min-1］

RGV063

Output rotational frequency［min-1］ Output rotational frequency［min-1］

RGV080


RGV100


RGV125


Gear ratio＝15

Oil lubricationGrease lubrication









The limit for the load torque acting on the output shaft is indicated to satisfy the expected lifetime (12,000 hours) of the RollerDrive. Dynamic output torque varies according to the output rotational frequency.

6

Torsional Rigidity

Torsional rigidity is the degree of shaft torsion for the output shaft torque.Higher torsional rigidity means less torque deformation and higher natural frequency.

0.0025

0 200 400 600 800 1,000 1,4001,200

0.0000

0.0005

0.0010

0.0015

0.0020

0 100 200 300 400 500 600 700 8000 50 100 150 200 250 350300

0.0000

0.0005

0.0010

0.0015

0.0020

0.0025

0 50 100 150 2000.0000

0.0005

0.0010

0.0015

0.0020

0.0025

0.0030

0.0035

0.0040

0 604020 80 100 120

RGV040 RGV063

RGV080 RGV100

RGV125

Out

put

sha

ft t

ors

ion

[rad

.]

Output shaft load torque [N・m]

Out

put

sha

ft t

ors

ion

[rad

.]


Out

put

sha

ft t

ors

ion

[rad

.]


Out

put

sha

ft t

ors

ion

[rad

.]


Out

put

sha

ft t

ors

ion

[rad

.]


0.0000

0.0005

0.0010

0.0015

0.0020

0.0025 0.0025

0.0000

0.0005

0.0010

0.0015

0.0020

7

RGV series

RGV040 Dimensions

*1 This drawing is for a model where the motor is mounted on the T surface.　*2 The rotating directions of input-output axes are related as a-d and b-c.*3 Dimensions in parentheses ( ) vary depending on the motor.　*4 There is one access hole on the S surface and one on the W surface.*5 Due to its mounting position, the positions of the oil plug, oil level, and drain differ for the oil lubrication type. See P. 23.　*6 The servo motor will need to be prepared by the customer.　

▲

Dimensions of Standard Gear Ratio Models (Options: None/A)

▲

Dimensions of Standard Gear Ratio Models (Options: B)

▲

Dimensions of High Gear Ratio Models (Options: None/A)

▲

Dimensions of High Gear Ratio Models (Options: B)

35 70

116

3570

11.592115

72

1677.58085

φ857.5520.570.5

7319.5

（240.6）*3

*3（49）

(4)M6×1, 12DP *3（76.6）(2)φ6.9 THRU, C-BORE φ12, 8.5DP

40

60

39.5

9.5

137

±0.05

76

21.5

, 8DP

(6)M5×0.8 , 10DP(2)M8×1.25 THRU

φ5 +0.012 0

(4)M6×1, 7.5DP

57.5

*3（□

60）

27.527.5

φ43ddcc

aabb

W surfaceOutput table surface

φ30

φ55

（8）

φ40

0 -0.0

21

+0.

028

+0.

008

φ32φ

32

, 8DP(6)M4×0.7, 8DP

35 ± 0

.1

46 ±0.1

±0.

0510

5

±0.0592

(2)φ5 +0.012 0

(2)M8×1.25, 16DP

*4Access hole

*4Access hole

φ25　　

, 1

0DP

+0.

028

+0.

008

φ25　　

, 1

0DP

35 70

116

3570

11.5928 115

72

19.5

T surface

（248.6）*3

*3（49）

(4)M6×1, 12DP *3（76.6）(2)φ6.9 THRU, C-BORE φ12, 8.5DP

40

60

39.5

9.513

7

±0.02

76

20

, 6DP

(5)M6×1, 15DP(2)M8×1.25 THRU

φ5 +0.01 0

(4)M6×1, 7.5DP

57.5

*3（□

60）

27.527.5

φ40ddcc

ddcc

aabb

（288.9）*3

(4)M6×1, 12DP *3（62.5）

*3（66.4）(2)φ6.9 THRU, C-BORE φ12, 8.5DP

116

40

6019.5

39.5

39.5

35

72

42

137

±0.05

35

76 45

70

70

21.5 92

9.5

11511.5

, 8DP

(6)M5×0.8, 10DP(2)M8×1.25 THRUφ5 +0.012

0

(4)M6×1, 7.5DP

57.5

*3（□

40）

27.527.5

φ43φ43

φ85φ85

73


φ30

φ40

52

φ25　　　

, 10D

P

1677.580

（8）

7.5

85

φ55

70.5 0.5

0 -0.0

21

+0.

028

+0.

008

φ25　　　

, 10D

P+

0.02

8+

0.0

08

, 8DP

(6)M4×0.7, 8DP35

± 0.1

46 ±0.1±

0.05

105

±0.0592

(2)φ5 +0.012 0

(2)M8×1.25, 16DP

*4Access hole

*4Access hole

φ32φ

32φ

32φ

32φ

32φ

32φ

32φ

32

35 70

116

3570

11.5921158

72

42

16

7.57.5

77.59295

7.5520.570.5

7319.5

（312.9）*3

45(4)M6×1, 12DP *3

（62.5）*3

（82.4）(2)φ6.9 THRU, C-BORE φ12, 8.5DP

40

60

39.5

9.5

137

±0.02

76

20

, 6DP

(5)M6×1, 15DP(2)M8×1.25 THRU

φ5 +0.01 0

(4)M6×1, 7.5DP

57.5

*3（□

40）

27.527.5

φ40ddcc

aabb


φ54

.9

φ88

（8）, 8DP

35 ± 0

.1

46 ±0.1

±0.

0510

5

±0.0592

(2)φ5 +0.012 0

(2)M8×1.25, 16DP

*4Access hole

*4Access hole

φ30　　

, 1

5DP

+0.0

26+0

.003

φ40

(6)M4×0.7, 8DP

+0.

026

+0.

004

φ25　　

, 1

0DP

φ32φ

32

1677.59295

7.5520.570.5

73

aabb

W surface

7.57.5

Output table surface

φ54

.9φ

88

（8）

φ30　　

, 1

5DP

+0.0

26+0

.003

φ40

+0.

026

+0.

004

φ25　　

, 1

0DP

, 8DP

35 ± 0

.1

46 ±0.1

±0.

0510

5

±0.0592

(2)φ5 +0.012 0

(2)M8×1.25, 16DP

*4Access hole

*4Access hole

(6)M4×0.7, 8DP

φ32φ

32

V surfaceV surface

U surface

S surfaceS surface

R surface

T surfaceT surfaceT surface

T surfaceT surface

T surfaceT surface

T surfaceT surface

S surfaceS surface

W surfaceW surface

S surfaceS surface

W surfaceW surface

S surfaceS surface

W surfaceW surface

S surfaceS surface

W surfaceW surface

V surfaceV surface

U surface

S surfaceS surface

R surface

T surface

V surfaceV surface

U surface

S surfaceS surface

R surface

T surface

V surfaceV surface

U surface

S surfaceS surface

R surface

8

RGV063 Dimensions

*1 This drawing is for a model where the motor is mounted on the T surface.　*2 The rotating directions of input-output axes are related as a-d and b-c.*3 Dimensions in parentheses ( ) vary depending on the motor.　*4 There are two access holes on the V surface and two on the W surface.*5 Due to its mounting position, the positions of the oil plug, oil level, and drain differ for the oil lubrication type. See P. 23.　*6 The servo motor will need to be prepared by the customer.　

▲


▲


▲


▲


φ60φ60

W surface

50 100

156

50100

16.5122155

87

0.57225

（304.3）*3

*3（51）

(4)M8×1.25, 16DP *3（98.3）(2)φ8.6 THRU, C-BORE φ17, 10.8DP

63

80

44

12

184.

5

±0.05

105

37.5

, 8DP

(6)M6×1 , 12DP(2)M10×1.5 THRUφ5 +0.012

0

(4)M8×1.25, 10DP

77.5

*3（□

60）

37.537.5

φ75φ75

φ60φ60

ddcc

aabb


*4Access hole

*4Access hole 10

φ70

20（9）

82.58590

78

55

φ52

　　

, 10D

P

φ60

0 -0.0

3

+0.

03

0

φ52

　　

, 10D

P+

0.03

0

φ9

0

(6)M5×0.8, 10DP

±0.05122

, 8DP

±0.

0514

0

±0.1

45

61 ±0.1(2)φ5 +0.012 0

(2)M10×1.5, 20DP

50 100

156

50100

16.512215510

87

3.5

5.55.5

8025

（338）*3

*3（61）

(4)M8×1.25, 16DP*3

（112）(2)φ8.6 THRU, C-BORE φ17, 10.8DP

63

80

44

12

184.

5

±0.02

105

37.5

, 8DP

(6)M6×1, 15DP(2)M10×1.5 THRUφ5 +0.01

0

(4)M8×1.25, 10DP

77.5

*3（□

80）

37.537.5

φ75φ75

ddcc

aabb


*4Access hole

10

20（9）

82.597.5100

78

55

φ60

　　

, 10

DP

φ89

.9+0

.008

+0.0

01

φ12

4

±0.05122

, 8DP

±0.

0514

0

±0.1

45

61 ±0.1(2)φ5 +0.012 0

(2)M10×1.5, 20DP

φ70

+0.

028

-0.0

04

(6)M5×0.8, 10DP

ddcc

aabb

(6)M5×0.8, 10DP

±0.05122

, 8DP±

0.05

140

±0.

145

61 ±0.1(2)φ5 +0.012 0

(2)M10×1.5, 20DP

φ60φ60

φ75φ75

72 0.5


φ70

φ60

55

φ52

　　

, 10D

P

78

2082.585

（9）

10

φ9

0

90

0 -0.0

3

*3（83）

*3（76.6）

*3（□

60）

（372.6）*3

(4)M8×1.25, 16DP

(2)φ8.6 THRU, C-BORE φ17, 10.8DP

77.5

63

50 87 60

4412

122

184.

5

105

37.5

80

50

100

100

(4)M8×1.25, 10DP(2)M10×1.5 THRU

25 58

16.5155

, 8DP+0.012 0

(6)M6×1, 12DP±0.05

φ5

156

37.537.5

＋0.

03

0

φ52

　　

, 10D

P＋

0.03

0

*4Access hole

5.55.550 100

156

50100

16.512215510

87 60

0.57225

（382.6）*3

（58）

(4)M8×1.25, 16DP*3

（83）*3

（76.6）(2)φ8.6 THRU, C-BORE φ17, 10.8DP

63

80

44

12

184.

5

±0.02

105

37.5

, 8DP

(6)M6×1, 15DP(2)M10×1.5 THRUφ5 +0.01

0

(4)M8×1.25, 10DP

77.5

*3（□

60）

37.537.5

φ75φ75ddcc

aabb


*4Access hole

10

20（9）

82.597.5100

78

55

φ60

　　

, 10

DP

φ89

.9

+0.0

08+0

.001

φ12

4

±0.05122

, 8DP

±0.

0514

0

±0.1

45

61 ±0.1(2)φ5 +0.012 0

(2)M10×1.5, 20DP

φ70

+0.

028

-0.0

04φ

52 　　

, 1

0DP

(6)M5×0.8, 10DP

φ60φ60

S surfaceS surface

T surface

V surfaceV surface

U surface

R surface

φ52

　　

, 1

0DP

Access hole *4Access hole *4



W surface

W surfaceW surface

T surfaceT surface

W surfaceW surface

T surfaceT surface

W surfaceW surface

T surfaceT surface

W surfaceW surface

T surfaceT surface

W surface

W surface

S surfaceS surface

T surface

V surfaceV surface

U surface

R surface

S surfaceS surface

T surface

V surfaceV surface

U surface

R surface

S surfaceS surface

T surface

V surfaceV surface

U surface

R surface

9

RGV series

RGV080 Dimensions

*1 This drawing is for a model where the motor is mounted on the T surface.　*2 The rotating directions of input-output axes are related as a-d and b-c.*3 Dimensions in parentheses ( ) vary depending on the motor.　*4 There is one access hole on the S surface and one on the W surface.*5 Due to its mounting position, the positions of the oil plug, oil level, and drain differ for the oil lubrication type. See P. 23.　*6 The servo motor will need to be prepared by the customer.　

▲


▲


▲


▲


ddcc

aabb

*4Access hole

*4Access hole

φ102

φ102

*3（□

80）

*3（112）

（363）*3

（61）*3(4)M8×1.25, 16DP

±0.05

148

195

100130 30

51

, 8DP+0.012 0

80

12562.5

62.5

(4)M8×1.25, 12.5DP(2)M10×1.5 THRU

125

102

*3（87）

(8)M6×1, 12DP

(2)φ8.6 THRU, C-BORE φ17, 16DP

9521

190

φ5

53

228

12

4545 3838

φ95

（9.5）

90

116

20

12.5

0 -0.0

35

φ12

0

75

100

108.5111

φ85

2

φ85φ85

, 8DP

±0.

0518

0

±0.

1

(8)M5×0.8, 10DP

59

±0.174

±0.05148

(2)φ5 +0.012 0

(2)M10×1.5, 20DP

φ76　　

, 1

5DP

+0.

03 0

φ76　　

, 1

5DP

+0.

03 0

ddcc

aabb

*4Access hole

*4Access hole

φ102φ102

*3（□

80）

*3（92.5）

*3（61）

（353.5）*3

(4)M8×1.25, 16DP

±0.02

148

195

100130 30

51

, 8DP+0.01 0

80

12562.5

62.5

(4)M8×1.25, 12.5DP

(2)M10×1.5 THRU

125

(8)M6×1, 15DP


9521

19010

φ5

53

228

12

4545

（9.5）

90

126

20

12.5

φ16

4

75

100

108.5121

φ11

9.9

2

, 8DP

±0.

0518

0

±0.

159

±0.174

±0.05148

(2)φ5 +0.012 0

(2)M10×1.5, 20DP102

φ85　　

, 1

5DP

+0.0

45+0

.008

+0.

028

-0.0

04

φ95

(8)M5×0.8, 10DP

φ76　　

,

15D

P

φ85φ85

ddcc

aabb

φ85φ85

φ102φ102

*3（□

60）

*3（78）

*3（76.6）

（402.6）*3

4545 3838(4)M8×1.25, 16DP

±0.05

148

195

100130 30 58

51

, 8DP+0.012 0

80

12562.5

62.5

102

(4)M8×1.25, 12.5DP

(2)M10×1.5 THRU

125

87 60

(8)M6×1, 12DP


9521

190

φ5

53

228

12

φ76　　

, 1

5DP

φ95

（9.5）

90

116

20

12.5

0 -0.0

35

φ12

0

75

100

111108.5

φ85

2

, 8DP±

0.05

180

±0.

1(8)M5×0.8, 10DP

59

±0.174

±0.05148

(2)φ5 +0.012 0

(2)M10×1.5, 20DP

＋0.

03

0

φ76　　

, 1

5DP

＋0.

03

0

*4Access hole

*4Access hole

ddcc

aabb

*4Access hole

*4Access hole

φ102φ102

*3（□

80）

*3（83）

*3（76.6）

（417.6）*3

58(4)M8×1.25, 16DP

±0.02

148

195

100130 30

51

, 8DP+0.01 0

80

12562.5

62.5

(4)M8×1.25, 12.5DP(2)M10×1.5 THRU

125

102

60

(8)M6×1, 15DP


9521

19010

φ5

53

228

12

4545

（9.5）

90

126

20

12.5

φ16

4

75

100

108.5121

φ11

9.9

2

, 8DP

±0.

0518

0

±0.

159

±0.174

±0.05148

(2)φ5 +0.012 0

(2)M10×1.5, 20DP

φ85

　　

, 15

DP

+0.0

45+0

.008 +0.

028

-0.0

04

φ95

(8)M5×0.8, 10DP

φ76　　

, 1

5DP

φ85φ85

V surfaceV surface

U surface

S surfaceS surface

R surface

T surfaceOutput table surface

T surfaceT surface


T surfaceT surface

V surfaceV surface

U surface

S surfaceS surface

R surface

T surface


T surfaceT surface


T surfaceT surface

V surfaceV surface

U surface

S surfaceS surface

R surface

T surface

V surfaceV surface

S surfaceS surface

R surface

T surfaceU surfaceU surface

W surface

W surface

W surface

W surface

W surfaceW surface

S surfaceS surface

W surfaceW surface

S surfaceS surface

W surfaceW surface

S surfaceS surface

W surfaceW surface

S surfaceS surface

10

RGV100 Dimensions

*1 This drawing is for a model where the motor is mounted on the T surface.　*2 The rotating directions of input-output axes are related as a-d and b-c.*3 Dimensions in parentheses ( ) vary depending on the motor.　*4 There are two access holes on the V surface and two on the W surface.*5 Due to its mounting position, the positions of the oil plug, oil level, and drain differ for the oil lubrication type. See P. 23.　*6 The servo motor will need to be prepared by the customer.　

▲


▲


▲


▲


φ105

φ105

+0.0

35 0

ddcc

aabb

*4Access holeφ1

20φ1

20

(4)M10×1.5, 20DP

(2)φ10.5 THRU, C-BORE φ19, 13.8DP

, 8DP+0.012 0φ5

100

60

（470）*3

150

230

15

155*3

（76.5）120

60

150

75

(6)M10×1.5, 20DP(2)M12×1.75 THRU

37.5

(4)M10×1.5, 15DP

118

235

±0.05

275

11525

*3（□

90）

180

75

*3（163.5）

5555

0 -0.0

35

φ14

5φ

100

φ90

,

15D

P

+0.0

35 0

φ90

,

15D

P

φ12

0

（15）

120

110100

1580

23

125132

1

φ105

φ105

, 8DP

±0.

0520

5

±0.

1

(6)M6×1, 12DP

60

±0.190

±0.05180

(2)φ5 +0.012 0

(2)M12×1.75, 24DP

ddcc

aabb

φ120φ120

(4)M10×1.5, 20DP

(2)φ10.5 THRU, C-BORE φ19, 13.8DP

, 8DP+0.01 0φ5

100

60

118

（554）*3

150

15

155120

60

150

75

(6)M10×1.5, 17DP(2)M12×1.75 THRU

37.5

(4)M10×1.5, 15DP

235

±0.02

275

11525

*3（□

90）

180

75

23012

*3（76.5）

*3（235.5）

5555

φ19

4

φ14

4.9

φ10

0

, 10D

P

（15）

120

110100

1580

23

136142

1

, 8DP

±0.

0520

5

±0.

160

±0.190

±0.05180

(2)φ5 +0.012 0

(2)M12×1.75, 24DP

+0.0

45+0

.008 +

0.03

3-0

.004

φ90

,

15D

P

φ12

0

(6)M6×1, 12DP

ddcc

aabb

φ105

φ105

φ120

φ120

, 8DP±

0.05

205

±0.

1

(6)M6×1, 12DP

60

±0.190

±0.05180

(2)φ5 +0.012 0

(2)M12×1.75, 24DP

0 -0.0

35

φ14

5φ

100

φ90　　　

, 15D

P

φ12

0

（15）

120

110

1580

23

125132

100 15555(4)M10×1.5, 20DP

(2)φ10.5 THRU, C-BORE φ19, 13.8DP

, 8DP+0.012 0φ5

100

60

（533.5）*3

150

230

15

155 86.5120

60

150

75

(6)M10×1.5, 20DP

(2)M12×1.75 THRU

37.5

(4)M10×1.5, 15DP

235

±0.05

275

11525

*3（□

80）

180

75

118 90

*3（105）

*3（112）

＋0.

035

0

φ90　　　

, 15D

P＋

0.03

5

0

ddcc

aabb

φ120φ120

(4)M10×1.5, 20DP

(2)φ10.5 THRU, C-BORE φ19, 13.8DP

, 8DP+0.01 0φ5

100

60

（526.8）*3

150

23012

15

155 86.5*3

（100）120

60

150

75

(6)M10×1.5, 17DP(2)M12×1.75 THRU

37.5

(4)M10×1.5, 15DP

118

90

235

±0.02

275

11525

*3（□

60）

180

75

*3（98.3）

5555

φ19

4φ

144.

9

（15）

120

110100

1580

23

136142

1

, 8DP

±0.

0520

5

±0.

160

±0.190

±0.05180

(2)φ5 +0.012 0

(2)M12×1.75, 24DP

φ10

0

,

10D

P+0

.045

+0.0

08 +0.

033

-0.0

04φ

90

, 15

DP

φ12

0

(6)M6×1, 12DP

φ105

φ105

V surfaceV surface

U surface

S surfaceS surface

R surface

T surface

*4Access hole

V surfaceV surface

U surface

S surfaceS surface

R surface

T surface

*4Access hole

V surfaceV surface

U surface

S surfaceS surface

R surface

T surface

*4Access hole

V surfaceV surface

S surfaceS surface

R surface

T surfaceUsurfaceUsurface


T surfaceT surface

W surface


T surfaceT surface

W surface


T surfaceT surface

W surface


T surfaceT surface

W surface

*4Access hole

W surfaceW surface

*4Access hole

W surfaceW surface

*4Access hole

W surfaceW surface

*4Access hole

W surfaceW surface

11

RGV series

RGV125 Dimensions

▲


▲


▲


▲


φ135

φ135

ddcc

aabb

+0.0

35 0

φ12

0

,

20D

P

+0.0

35 0

φ12

0

,

20D

P

φ135

φ135

, 8DP

±0.

0527

0

±0.

1

(8)M8×1.25, 16DP

90

±0.1110

±0.05220

(2)φ5 +0.012 0

(2)M16×2, 32DP

0 -0.0

4

φ18

0φ

130

φ15

0

（15）

145

135

15100

32

150157

119 0.5（125）*3 （5）*37070

(4)M12×1.75, 24DP

(2)φ14 THRU, C-BORE φ26, 18DP

, 8DP+0.012 0φ5

290

15

125 13

4

70

335

（527）*3280

185*3

（100.5）140

(8)M10×1.5, 20DP

(8)M10×1.5, 17DP

47.5

(2)M16×2 THRU77.5±0.05 140

30

*3（□

130）

220

*3（146.5）

φ262

φ155

φ155

ddcc

aabb

φ13

0

,

10D

P

, 8DP

±0.

0527

0

±0.

190

±0.1110

±0.05220

(2)φ5 +0.012 0

(2)M16×2, 32DP

φ23

0φ

179.

9

（15）

145

135

15100

32

161167

119 0.57070(4)M12×1.75, 24DP


, 8DP+0.01 0φ5

290

1512

5

134

70

335

（612）*328015

185*3

（81.5）140

(8)M10×1.5, 17DP

(8)M10×1.5, 17DP

47.5

(2)M16×2 THRU77.5±0.02 140

30

*3（□

90）

220

*3（235.5）

φ155

φ155

φ262

+0.0

52+0

.010 +0.

033

-0.0

04φ

120

, 2

0DP

(8)M8×1.25, 16DP

φ15

0

ddcc

aabb

φ135

φ135

φ155

φ155

(4)M12×1.75, 24DP(2)φ14 THRU, C-BORE φ26, 18DP

, 8DP+0.012 0φ5

290

15

125 13

4

90

70

335

（652.5）*3280

185140

77.5(8)M10×1.5, 20DP

(8)M10×1.5, 17DP

47.5 94

(2)M16×2 THRU±0.05 14030

*3（□

90）

220

*3（115）

*3（163.5）

φ262

7070

0 -0.0

4

φ18

0φ

130

φ15

0

（15）

145

135

15100

32

150157

119 0.5

, 8DP

±0.

0527

0

±0.

1

(8)M8×1.25, 16DP

90

±0.1110

±0.05220

(2)φ5 +0.012 0

(2)M16×2, 32DP

φ12

0 　　

, 20

DP

＋0.

035

0

φ12

0 　　

, 20

DP

＋0.

035

0

ddcc

aabb

φ13

0

,

10D

P

, 8DP

±0.

0527

0

±0.

190

±0.1110

±0.05220

(2)φ5 +0.012 0

(2)M16×2, 32DP

φ23

0φ

179.

9

（15）

145

135

15100

32

161167

119 0.57070(4)M12×1.75, 24DP


, 8DP+0.01 0φ5

290

15

125 13

4

90

70

335

（606）*328015

185 94140

(8)M10×1.5, 17DP

(8)M10×1.5, 17DP

47.5

(2)M16×2 THRU77.5±0.02 140

30

*3（□

80）

220

*3（105）

*3（112）

φ262

φ155

φ155

+0.0

52+0

.010 +0.

033

-0.0

04φ

120

, 2

0DP

(8)M8×1.25, 16DP

φ15

0

φ135

φ135

*4Access hole

V surfaceV surface

U surface

S surfaceS surface

R surface

T surface

*4Access hole

V surfaceV surface

U surface

S surfaceS surface

R surface

T surface

*4Access hole

V surfaceV surface

U surface

S surfaceS surface

R surface

T surface

*4Access hole

V surfaceV surface

U surface

S surfaceS surface

R surface

T surface


T surfaceT surface

W surface

W surfaceW surface


T surfaceT surface

W surface

W surfaceW surface


T surfaceT surface

W surface

W surfaceW surface


T surfaceT surface

W surface

W surfaceW surface*4Access hole

*4Access hole

*4Access hole

*4Access hole

*1 This drawing is for a model where the motor is mounted on the T surface.　*2 The rotating directions of input-output axes are related as a-d and b-c.*3 Dimensions in parentheses ( ) vary depending on the motor.　*4 There are two access holes on the V surface and two on the W surface.*5 Due to its mounting position, the positions of the oil plug, oil level, and drain differ for the oil lubrication type. See P. 23.　*6 The servo motor will need to be prepared by the customer.　 12

List of Mountable Servo MotorsRGV040　Standard gear ratio model ［Gear ratio＝ 15］

Manufacturer Series Model Motor capacity ［kW］

Motor rated torque ［N・m］

Motor max. torque ［N・m］

Rated rotation speed ［min-1］

Motor inertia ［× 10-4 kg・m2］ Attachment code

OMRONG R88M-G40030H、T 0.4 1.3 3.67 3,000 0.26 CD

G5 R88M-K40030H、T 0.4 1.3 3.8 3,000 0.26 CD

KEYENCESV SV-M040 0.4 1.27 4.46 3,000 0.442 DD

SV2 SV2-M040A 0.4 1.27 4.46 3,000 0.486 DD

PanasonicMINAS_A5

MSMD042G1 0.4 1.3 3.8 3,000 0.26 CDMHMD042G1 0.4 1.3 3.8 3,000 0.67 CDMSME042G1 0.4 1.3 3.8 3,000 0.26 CD

MINAS_A6MSMF042L1 0.4 1.27 3.82 3,000 0.27 CDMHMF042L1 0.4 1.27 4.46 3,000 0.56 CD

FANUC β is β iS1/6000 0.5 1.2 5 6,000 0.34 DD

Mitsubishi Electric

J4HG-MR43 0.4 1.3 3.8 3,000 0.142 DDHG-KR43 0.4 1.3 4.5 3,000 0.371 DD

J5HK-KT43W 0.4 1.3 4.5 3,000 0.41 DDHK-KT434W 0.2 1.3 4.5 1,500 0.41 DD

YaskawaElectric

Σ -ⅤSGMAV-04A 0.4 1.27 3.82 3,000 0.19 DDSGMAV-06A 0.55 1.75 5.25 3,000 0.326 DDSGMJV-04A 0.4 1.27 4.46 3,000 0.442 DD

Σ -7SGM7J-04A 0.4 1.27 4.46 3,000 0.486 DDSGM7A-04A 0.4 1.27 4.46 3,000 0.216 DD

Sanyo DenkiR2

R2AA06040H 0.4 1.27 4.8 3,000 0.412 DDR2AA06040F 0.4 1.27 4.8 3,000 0.412 DD

R5R5AA06040H 0.4 1.27 4.8 3,000 0.414 DDR5AA06040F 0.4 1.27 4.8 3,000 0.414 DD

RGV040　High gear ratio model ［Gear ratio＝ 45、75］Manufacturer Series Model Motor capacity

［kW］Motor rated torque ［N・m］



Motor inertia ［× 10-4 kg・m2］

Attachment code

Corresponding reduction ratio45 75

OMRONG

R88M-G10030H、T 0.1 0.32 0.9 3,000 0.051 ZG - 〇R88M-G20030H、T 0.2 0.64 1.78 3,000 0.14 BJC 〇 -

G5R88M-K10030H、T 0.1 0.32 0.95 3,000 0.051 ZG - 〇R88M-K20030H、T 0.2 0.64 1.91 3,000 0.14 BJC 〇 -

KEYENCESV

SV-M010 0.1 0.318 1.11 3,000 0.0665 ZG - 〇SV-M020 0.2 0.637 2.23 3,000 0.259 BK 〇 -

SV2SV2-M010A 0.1 0.318 1.11 3,000 0.0659 ZG - 〇SV2-M020A 0.2 0.637 2.23 3,000 0.263 BK 〇 -

Panasonic

MINAS_A5

MSMD012G1 0.1 0.32 0.95 3,000 0.051 ZF - 〇MSMD022G1 0.2 0.64 1.91 3,000 0.14 BJC 〇 -MHMD022G1 0.2 0.64 1.91 3,000 0.42 BJC 〇 -MSME012G1 0.1 0.32 0.95 3,000 0.051 ZF - 〇MSME022G1 0.2 0.64 1.91 3,000 0.14 BJC 〇 -

MINAS_A6

MSMF012L1 0.1 0.32 0.95 3,000 0.048 ZF - 〇MSMF022L1 0.2 0.64 1.91 3,000 0.14 BJC 〇 -MHMF012L1 0.1 0.32 1.11 3,000 0.071 ZG - 〇MHMF022L1 0.2 0.64 2.23 3,000 0.29 BJC 〇 -

FANUC β isβ iS0.3/5000 0.1 0.32 0.96 4,000 0.034 ZH - 〇β iS0.4/5000 0.13 0.4 1 4,000 0.1 BKA - 〇

Mitsubishi Electric

J4

HG-MR13 0.1 0.32 0.95 3,000 0.03 ZG - 〇HG-MR23 0.2 0.64 1.9 3,000 0.0865 BM 〇 -HG-KR13 0.1 0.32 1.1 3,000 0.0777 ZG - 〇HG-KR23 0.2 0.64 2.2 3,000 0.221 BM 〇 -

J5

HK-KT13W 0.1 0.32 1.1 3,000 0.0686 ZG - 〇HK-KT1M3W 0.15 0.48 1.7 3,000 0.0977 ZG 〇 -HK-KT13UW 0.1 0.32 1.1 3,000 0.121 BF - 〇HK-KT23W 0.2 0.64 2.2 3,000 0.209 BM 〇 -

YaskawaElectric

Σ -Ⅴ

SGMAV-01A 0.1 0.318 0.955 3,000 0.038 ZG - 〇SGMAV-C2A 0.15 0.477 1.43 3,000 0.0531 ZG 〇 -SGMAV-02A 0.2 0.637 1.91 3,000 0.116 BK 〇 -SGMJV-01A 0.1 0.318 1.11 3,000 0.0665 ZG - 〇SGMJV-C2A 0.15 0.477 1.67 3,000 0.0883 ZG 〇 -SGMJV-02A 0.2 0.637 2.23 3,000 0.259 BK 〇 -

Σ -7

SGM7J-01A 0.1 0.318 1.11 3,000 0.0659 ZG - 〇SGM7J-C2A 0.15 0.477 1.67 3,000 0.0915 ZG 〇 -SGM7J-02A 0.2 0.637 2.23 3,000 0.263 BK 〇 -SGM7A-01A 0.1 0.318 1.11 3,000 0.0337 ZG - 〇SGM7A-C2A 0.15 0.477 1.67 3,000 0.0458 ZG 〇 -SGM7A-02A 0.2 0.637 2.23 3,000 0.139 BK 〇 -SGM7P-01A 0.1 0.318 0.955 3,000 0.0592 BE - 〇

Sanyo DenkiR2

R2AA04010F 0.1 0.318 1.18 3,000 0.0627 ZH - 〇R2AA06010F 0.1 0.318 1.13 3,000 0.117 BF - 〇R2AA06020F 0.2 0.637 2.2 3,000 0.219 BM 〇 -

R5R5AA06020F 0.2 0.637 2.2 3,000 0.198 BM 〇 -R5AA06020H 0.2 0.637 2.2 3,000 0.198 BM 〇 -

*1 The customer will be responsible for preparing a servo motor with no keyway.*2 Contact Sankyo for servo motors with brakes or with oil seals.

13

List of Mountable Servo MotorsRGV063　Standard gear ratio model ［Gear ratio＝ 12、24］






Attachment code


OMRONG R88M-G40030H、T 0.4 1.3 3.67 3,000 0.26 CD - 〇

R88M-G75030H、T 0.75 2.4 7.05 3,000 0.87 GF 〇〇

G5 R88M-K40030H、T 0.4 1.3 3.8 3,000 0.26 CD - 〇R88M-K75030H、T 0.75 2.4 7.1 3,000 0.87 GF 〇〇

KEYENCE SV SV-M040 0.4 1.27 4.46 3,000 0.442 DD - 〇SV2 SV2-M040A 0.4 1.27 4.46 3,000 0.486 DD - 〇

Panasonic

MINAS_A5

MSMD042G1 0.4 1.3 3.8 3,000 0.26 CD - 〇MSMD082G1 0.75 2.4 7.1 3,000 0.87 GF 〇〇MHMD042G1 0.4 1.3 3.8 3,000 0.67 CD - 〇MHMD082G1 0.75 2.4 7.1 3,000 1.51 GF 〇〇MSME042G1 0.4 1.3 3.8 3,000 0.26 CD - 〇MSME082G1 0.75 2.4 7.1 3,000 0.87 GF 〇〇

MINAS_A6MSMF042L1 0.4 1.27 3.82 3,000 0.27 CD - 〇MSMF082L1 0.75 2.39 7.16 3,000 0.96 GF 〇〇MHMF042L1 0.4 1.27 4.46 3,000 0.56 CD - 〇

Mitsubishi Electric

J4HG-MR43 0.4 1.3 3.8 3,000 0.142 DD - 〇HG-MR73 0.75 2.4 7.2 3,000 0.586 FF 〇〇HG-KR43 0.4 1.3 4.5 3,000 0.371 DD - 〇

J5

HK-KT43W 0.4 1.3 4.5 3,000 0.41 DD - 〇HK-KT63W 0.6 1.9 6.7 3,000 0.598 DD 〇〇HK-KT43UW 0.4 1.3 4.5 3,000 0.726 ED - 〇HK-KT434W 0.2 1.3 4.5 1,500 0.41 DD - 〇HK-KT634W 0.3 1.9 6.7 1,500 0.598 DD 〇〇

YaskawaElectric

Σ -Ⅴ

SGMAV-04A 0.4 1.27 3.82 3,000 0.19 DD - 〇SGMAV-06A 0.55 1.75 5.25 3,000 0.326 DD 〇〇SGMAV-08A 0.75 2.39 7.16 3,000 0.769 FF 〇〇SGMJV-04A 0.4 1.27 4.46 3,000 0.442 DD - 〇SGMJV-06A 0.6 1.91 6.69 3,000 0.667 DD 〇〇

Σ -7

SGM7J-04A 0.4 1.27 4.46 3,000 0.486 DD - 〇SGM7J-06A 0.6 1.91 6.69 3,000 0.8 DD 〇〇SGM7A-04A 0.4 1.27 4.46 3,000 0.216 DD - 〇SGM7A-06A 0.6 1.91 6.69 3,000 0.315 DD 〇〇SGM7P-04A 0.4 1.27 3.82 3,000 0.409 ED - 〇

Sanyo Denki

R2R2AA06040F 0.4 1.27 4.8 3,000 0.412 DD - 〇R2AA06040H 0.4 1.27 4.8 3,000 0.412 DD - 〇R2AA08040F 0.4 1.27 4.4 3,000 1.04 ED - 〇

R5R5AA06040F 0.4 1.27 4.8 3,000 0.414 DD - 〇R5AA06040H 0.4 1.27 4.8 3,000 0.414 DD - 〇R5AA08075F 0.75 2.39 7.5 3,000 1.65 FE - 〇

RGV063　High gear ratio model ［Gear ratio＝ 36、60、72、120］Manufacturer Series Model Motor capacity

［kW］Motor rated torque ［N・m］




Attachment code

Corresponding reduction ratio36 60 72 120

OMRONG R88M-G10030H、T 0.10 0.32 0.90 3,000 0.051 AG - - - 〇

R88M-G20030H、T 0.20 0.64 1.78 3,000 0.14 BJC 〇 - 〇 -

G5 R88M-K10030H、T 0.10 0.32 0.95 3,000 0.051 AG - - - 〇R88M-K20030H、T 0.20 0.64 1.91 3,000 0.14 BJC 〇 - 〇 -

KEYENCESV SV-M010 0.10 0.318 1.11 3,000 0.0665 AG - - - 〇

SV-M020 0.20 0.637 2.23 3,000 0.259 BK 〇 - 〇 -

SV2 SV2-M010A 0.10 0.318 1.11 3,000 0.0659 AG - - - 〇SV2-M020A 0.20 0.637 2.23 3,000 0.263 BK 〇 - 〇 -

Panasonic

MINAS_A5

MSMD012G1 0.10 0.32 0.95 3,000 0.051 AF - - - 〇MSMD022G1 0.20 0.64 1.91 3,000 0.14 BJC 〇 - 〇 -MHMD022G1 0.20 0.64 1.91 3,000 0.42 BJC 〇 - 〇 -MSME012G1 0.10 0.32 0.95 3,000 0.051 AF - - - 〇MSME022G1 0.20 0.64 1.91 3,000 0.14 BJC 〇 - 〇 -

MINAS_A6

MSMF012L1 0.10 0.32 0.95 3,000 0.048 AF - - - 〇MSMF022L1 0.20 0.64 1.91 3,000 0.27 BJC 〇 - 〇 -MHMF012L1 0.10 0.32 1.11 3,000 0.071 AG - - - 〇MHMF022L1 0.20 0.64 2.23 3,000 0.56 BJC 〇 - 〇 -

Mitsubishi Electric

J4

HG-MR13 0.10 0.32 0.95 3,000 0.03 AG - - - 〇HG-MR23 0.20 0.64 1.90 3,000 0.0865 BM 〇 - 〇 -HG-KR13 0.10 0.32 1.10 3,000 0.0777 AG - - - 〇HG-KR23 0.20 0.64 2.20 3,000 0.221 BM 〇 - 〇 -

J5

HK-KT13W 0.10 0.32 1.10 3,000 0.0686 AG - - - ○HK-KT1M3W 0.15 0.48 1.70 3,000 0.0977 AG - - ○ -HK-KT13UW 0.10 0.32 1.10 3,000 0.121 BF - - - ○HK-KT23W 0.20 0.64 2.20 3,000 0.209 BM ○ - ○ -HK-KT23UW 0.20 0.64 1.90 3,000 0.419 DG ○ - ○ -

YaskawaElectric

Σ -V

SGMAV-01A 0.10 0.318 0.955 3,000 0.038 AG - - - 〇SGMAV-C2A 0.15 0.477 1.43 3,000 0.0531 AG - 〇〇〇SGMAV-02A 0.20 0.637 1.91 3,000 0.116 BK 〇 - 〇 -SGMJV-01A 0.10 0.318 1.11 3,000 0.0665 AG - - - 〇SGMJV-C2A 0.15 0.477 1.67 3,000 0.0883 AG - - 〇 -SGMJV-02A 0.20 0.637 2.23 3,000 0.259 BK 〇 - 〇 -

Σ -7

SGM7J-01A 0.10 0.318 1.11 3,000 0.0659 AG - - - 〇SGM7J-C2A 0.15 0.477 1.67 3,000 0.0915 AG - - 〇 -SGM7J-02A 0.20 0.637 2.23 3,000 0.263 BK 〇 - 〇 -SGM7A-01A 0.10 0.318 1.11 3,000 0.0337 AG - - - 〇SGM7A-C2A 0.15 0.477 1.67 3,000 0.0458 AG - - 〇 -SGM7A-02A 0.20 0.637 2.23 3,000 0.139 BK 〇 - 〇 -SGM7P-01A 0.10 0.318 0.955 3,000 0.0592 BE - - - 〇SGM7P-02A 0.20 0.637 1.91 3,000 0.263 DF 〇 - 〇 -

Sanyo DenkiR2

R2AA04010F 0.10 0.318 1.18 3,000 0.0627 AH - - - 〇R2AA06010F 0.10 0.318 1.13 3,000 0.117 BF - - - 〇R2AA06020F 0.20 0.637 2.20 3,000 0.219 BM 〇 - 〇 -R2AA08020F 0.20 0.637 2.20 3,000 0.52 DG 〇 - 〇 -

R5 R5AA06020H 0.20 0.637 2.20 3,000 0.198 BM 〇 - 〇 -R5AA06020F 0.20 0.637 2.20 3,000 0.198 BM 〇 - 〇 -


14







Attachment code


OMRONG

R88M-G75030H、T 0.75 2.4 7.05 3,000 0.87 HE 〇〇

R88M-G1K030T 1 3.18 9.1 3,000 1.69 IE 〇〇

R88M-G1K530T 1.5 4.77 12.8 3,000 2.59 JE 〇〇

G5R88M-K75030H、T 0.75 2.4 7.1 3,000 0.87 HE 〇〇

R88M-K1K030H、T 1 3.18 9.55 3,000 2.03 JE 〇〇

KEYENCESV SV-M075 0.75 2.39 8.36 3,000 1.57 FE 〇〇

SV2 SV2-M075A 0.75 2.39 8.36 3,000 1.59 FE 〇〇

Panasonic

MINAS A5

MSMD082G1 0.75 2.4 7.1 3,000 0.87 HE 〇〇

MHMD082G1 0.75 2.4 7.1 3,000 1.51 HE 〇〇

MSME082G1 0.75 2.4 7.1 3,000 0.87 HE 〇〇

MSME102G1 1 3.18 9.55 3,000 2.03 JE 〇〇

MINAS A6

MSMF082L1 0.75 2.39 7.16 3,000 0.96 HE 〇〇

MSMF092L1 1 3.18 9.55 3,000 1.26 HE 〇〇

MSMF102L1 1 3.18 9.55 3,000 2.15 JE 〇〇

MHMF082L1 0.75 2.39 8.36 3,000 1.56 HE 〇〇

MHMF092L1 1 3.18 11.1 3,000 2.03 HE 〇〇

FANUC

α iF α iF2/5000 0.75 2 8.3 4,000 5.26 AA - 〇

α iS

α iS2/5000 0.75 2 7.8 4,000 2.91 AA - 〇

α iS2/6000 1 2 6 6,000 2.91 AA - 〇

α iS4/5000 1 4 8.8 4,000 5.15 AC 〇〇

α iS4/6000 1 3 7.5 6,000 5.15 AC 〇〇

β iSβ iS2/4000 0.5 2 7 4,000 2.91 AA - 〇

β iS4/4000 0.75 3.5 10 3,000 5.15 AC 〇〇

Mitsubishi Electric

J4

HG-MR73 0.75 2.4 7.2 3,000 0.586 FE 〇〇

HG-KR73 0.75 2.4 8.4 3,000 1.26 FE 〇〇

HG-JR73 0.75 2.4 7.2 3,000 2.09 GD 〇〇

HG-JR103 1 3.2 9.6 3,000 2.65 GD 〇〇

J5

HK-KT63W 0.6 1.9 6.7 3,000 0.598 CB - 〇

HK-KT7M3W 0.75 2.4 8.4 3,000 1.37 FE 〇〇

HK-KT103W 1 3.2 11.1 3,000 1.68 FE 〇〇

HK-KT7M3UW 0.75 2.4 8.4 3,000 2.11 GE 〇〇

HK-KT103UW 1 3.2 11.1 3,000 2.74 GE 〇〇

HK-KT634W 0.3 1.9 6.7 1,500 0.598 CB - 〇

HK-KT7M34W 0.375 2.4 8.4 1,500 1.37 FE 〇〇

HK-KT1034W 0.5 3.2 11.1 1,500 1.68 FE 〇〇

YaskawaElectric

Σ -Ⅴ

SGMAV-08A 0.75 2.39 7.16 3,000 0.769 FE 〇〇

SGMAV-10A 1 3.18 9.55 3,000 1.2 FE 〇〇

SGMGV-03A 0.3 1.96 5.88 1,500 2.48 EB - 〇

SGMGV-05A 0.45 2.86 8.92 1,500 3.33 GD 〇〇

SGMSV-10A 1 3.18 9.54 3,000 1.74 LG 〇〇

SGMJV-06A 0.6 1.91 6.69 3,000 0.667 CB - 〇

SGMJV-08A 0.75 2.39 8.36 3,000 1.57 FE 〇〇

Σ -7

SGM7J-06A 0.6 1.91 6.69 3,000 0.8 CB - 〇

SGM7J-08A 0.75 2.39 8.36 3,000 1.59 FE 〇〇

SGM7A-06A 0.6 1.91 6.69 3,000 0.315 CB - 〇

SGM7A-08A 0.75 2.39 8.36 3,000 0.775 FE 〇〇

SGM7A-10A 1 3.18 11.1 3,000 0.971 FE 〇〇

SGM7G-03A 0.3 1.96 5.88 1,500 2.48 GD - 〇

SGM7G-05A 0.45 2.86 8.92 1,500 3.33 GD 〇〇

Sanyo DenkiR2

R2AA08075F 0.75 2.39 8.5 3,000 1.82 FD 〇〇

R2AAB8100H 1 3.18 11.6 3,000 2.38 ED 〇〇

R2AA10075F 0.75 2.39 8.6 3,000 2 KF 〇〇

R2AAB8075F 0.75 2.38 11 3,000 1.64 ED 〇〇

R5R5AA08075D 0.75 2.39 8.5 3,000 1.65 FD 〇〇

R5AA08075F 0.75 2.39 7.5 3,000 1.65 FD 〇〇


15

List of Mountable Servo MotorsRGV080　High gear ratio model ［Gear ratio＝ 36、60、72、120］






Attachment code


OMRONG

R88M-G20030H、T 0.2 0.64 1.78 3,000 0.14 BJC - 〇 - 〇

R88M-G40030H、T 0.4 1.3 3.67 3,000 0.26 BJ 〇 - 〇 -

G5R88M-K20030H、T 0.2 0.64 1.91 3,000 0.14 BJC - 〇 - 〇

R88M-K40030H、T 0.4 1.3 3.8 3,000 0.26 BJ 〇 - 〇 -

KEYENCESV

SV-M020 0.2 0.637 2.23 3,000 0.259 BK - 〇 - 〇

SV-M040 0.4 1.27 4.46 3,000 0.442 BK - - 〇 -

SV2SV2-M020A 0.2 0.637 2.23 3,000 0.263 BK - 〇 - 〇

SV2-M040A 0.4 1.27 4.46 3,000 0.486 BK - - 〇 -

Panasonic

MINAS_A5

MSMD022G1 0.2 0.64 1.91 3,000 0.14 BJC - 〇 - 〇

MSMD042G1 0.4 1.3 3.8 3,000 0.26 BJ 〇 - 〇 -

MHMD022G1 0.2 0.64 1.91 3,000 0.42 BJC - 〇 - 〇

MHMD042G1 0.4 1.3 3.8 3,000 0.67 BJ 〇 - 〇 -

MSME022G1 0.2 0.64 1.91 3,000 0.14 BJC - 〇 - 〇

MSME042G1 0.4 1.3 3.8 3,000 0.26 BJ 〇 - 〇 -

MINAS_A6

MSMF022L1 0.2 0.64 1.91 3,000 0.14 BJC - 〇 - 〇

MSMF042L1 0.4 1.27 3.82 3,000 0.27 BJ 〇 - 〇 -

MHMF022L1 0.2 0.64 2.23 3,000 0.29 BJC - 〇 - 〇

MHMF042L1 0.4 1.27 4.46 3,000 0.56 BJ - - 〇 -

FANUC β iS β iS0.5/6000 0.35 0.65 2.5 6,000 0.18 BKA - 〇 - 〇

Mitsubishi Electric

J4HG-MR23 0.2 0.64 1.9 3,000 0.0865 BM - 〇 - 〇

HG-MR43 0.4 1.3 3.8 3,000 0.142 BM 〇 - 〇 -

HG-KR23 0.2 0.64 2.2 3,000 0.221 BM - 〇 - 〇

J5HK-KT1M3W 0.15 0.48 1.7 3,000 0.0977 AG - - - 〇

HK-KT23W 0.2 0.64 2.2 3,000 0.209 BM - 〇 - 〇

HK-KT23UW 0.2 0.64 1.9 3,000 0.419 DG - 〇 - 〇

YaskawaElectric

Σ -V

SGMAV-C2A 0.15 0.477 1.43 3,000 0.0531 AG - - - 〇

SGMAV-02A 0.2 0.637 1.91 3,000 0.116 BK - 〇 - 〇

SGMAV-04A 0.4 1.27 3.82 3,000 0.19 BK 〇 - 〇 -

SGMJV-C2A 0.15 0.477 1.67 3,000 0.0883 AG - - - 〇

SGMJV-02A 0.2 0.637 2.23 3,000 0.259 BK - 〇 - 〇

SGMJV-04A 0.4 1.27 4.46 3,000 0.442 BK - - 〇 -

Σ -7

SGM7J-C2A 0.15 0.477 1.67 3,000 0.0915 AG - - - 〇

SGM7J-02A 0.2 0.637 2.23 3,000 0.263 BK - 〇 - 〇

SGM7J-04A 0.4 1.27 4.46 3,000 0.486 BK - - 〇 -

SGM7A-C2A 0.15 0.477 1.67 3,000 0.0458 AG - - - 〇

SGM7A-02A 0.2 0.637 2.23 3,000 0.139 BK - 〇 - 〇

SGM7A-04A 0.4 1.27 4.46 3,000 0.216 BK - - 〇 -

SGM7P-02A 0.2 0.637 1.91 3,000 0.263 DF - 〇 - 〇

SGM7P-04A 0.4 1.27 3.82 3,000 0.409 DF 〇 - 〇 -

Sanyo DenkiR2

R2AA06020F 0.2 0.637 2.2 3,000 0.219 BM - 〇 - 〇

R2AA08020F 0.2 0.637 2.2 3,000 0.52 DG - 〇 - 〇

R2AA08040F 0.4 1.27 4.4 3,000 1.04 DG - - 〇 -

R5R5AA06020F 0.2 0.637 2.2 3,000 0.198 BM - 〇 - 〇

R5AA06020H 0.2 0.637 2.2 3,000 0.198 BM - 〇 - 〇


16







Attachment code


OMRON

GR88M-G1K530T 1.5 4.77 12.8 3,000 2.59 HE 〇〇R88M-G2K030T 2 6.36 18.4 3,000 3.46 HE 〇〇R88M-G3K030T 3 9.54 27 3,000 6.77 IF 〇〇

G5R88M-K1K530H、T 1.5 4.77 14.3 3,000 2.84 HE 〇〇R88M-K2K030H、T 2 6.37 19.1 3,000 3.68 HE 〇〇R88M-K3K030H、T 3 9.55 28.6 3,000 6.5 IF 〇〇

KEYENCE

SVSV-M100 0.85 5.39 13.8 1,500 13.9 IE 〇〇SV-M150 1.3 8.34 23.3 1,500 19.9 IF 〇〇SV-M200 1.8 11.5 28.7 1,500 26 IG 〇〇

SV2SV2-M100A 0.85 5.39 14.2 1,500 13.9 IG 〇〇SV2-M150A 1.3 8.34 23.3 1,500 19.9 IG 〇〇SV2-M200A 1.8 11.5 28.7 1,500 26 IG 〇〇

Panasonic

MINAS A5

MSME152G1 1.5 4.77 14.3 3,000 2.84 HE 〇〇MSME202G1 2 6.37 19.1 3,000 3.68 HE 〇〇MSME302G1 3 9.55 28.6 3,000 6.5 IF 〇〇MDME102G1 1 4.77 14.3 2,000 4.6 IF 〇〇MDME152G1 1.5 7.16 21.5 2,000 6.7 IF 〇〇MDME202G1 2 9.55 28.6 2,000 8.72 IF 〇〇

MINAS A6

MSMF152L1 1.5 4.77 14.3 3,000 3.1 HE 〇〇MSMF202L1 2 6.37 19.1 3,000 4.06 HE 〇〇MSMF302L1 3 9.55 28.6 3,000 7.04 IF 〇〇MHMF102L1 1 4.77 14.3 2,000 22.9 LF 〇〇MHMF152L1 1.5 7.16 21.5 2,000 33.4 LF 〇〇MDMF102L1 1 4.77 14.3 2,000 6.18 IF 〇〇MDMF152L1 1.5 7.16 21.5 2,000 9.16 IF 〇〇MDMF202L1 2 9.55 28.6 2,000 12.1 IF 〇〇

FANUC

α iFα iF4/5000 1.4 4 15 4,000 13.5 IE 〇〇α iF8/3000 1.6 8 29 3,000 25.7 IE 〇〇α iF8/4000 2.2 8 32 4,000 25.7 IE - 〇

α iSα iS4/5000 1 4 8.8 4,000 5.15 AC 〇〇α iS8/4000 2.5 8 32 4,000 11.7 IE - 〇α iS8/6000 2.2 8 22 6,000 11.7 IE 〇〇

β iSβ iS12/2000 1.4 10.5 21 2,000 22.8 IG 〇〇β iS12/3000 1.8 11 27 2,000 22.8 IG 〇〇β iS8/3000 1.2 7 15 2,000 11.7 IE 〇〇

Mitsubishi Electric

J4

HG-SR51 0.5 4.8 14.3 1,000 11.6 IG 〇〇HG-SR81 0.85 8.1 24.4 1,000 16 IG 〇〇HG-SR102 1 4.8 14.3 2,000 11.6 IG 〇〇HG-SR152 1.5 7.2 21.5 2,000 16 IG 〇〇HG-JR153 1.5 4.8 14.3 3,000 3.79 BD 〇〇HG-JR203 2 6.4 19.1 3,000 4.92 BD 〇〇HG-JR353 3.3 10.5 32 3,000 13.2 IH - 〇

J5

HK-KT153W 1.5 4.8 16.7 3,000 4.38 BE 〇〇HK-KT203W 2 6.4 19.1 3,000 5.65 BE 〇〇HK-KT202W 2 9.5 28.6 2,000 8.18 BE 〇〇HK-KT1534W 0.75 4.8 21.5 1,500 4.38 BE 〇〇HK-KT2034W 1 6.4 25.5 1,500 5.65 BE 〇〇HK-ST102W 1 4.8 14.3 2,000 8.65 IG 〇〇HK-ST172W 1.75 8.4 25.1 2,000 11.4 IG 〇〇HK-ST202AW 2 9.5 28.6 2,000 16.9 IG 〇〇HK-ST1024W 0.6 5.7 17.2 1,000 8.65 IG 〇〇HK-ST1724W 0.85 8.1 24.4 1,000 11.4 IG 〇〇

YaskawaElectric

Σ -V

SGMGV-09A 0.85 5.39 13.8 1,500 13.9 IE 〇〇SGMGV-13A 1.3 8.34 23.3 1,500 19.9 IF 〇〇SGMGV-20A 1.8 11.5 28.7 1,500 26 IG 〇〇SGMSV-15A 1.5 4.9 14.7 3,000 2 KG - 〇SGMSV-20A 2 6.36 19.1 3,000 2.47 KG 〇〇SGMSV-25A 2.5 7.96 23.9 3,000 3.19 KG 〇〇SGMSV-30A 3 9.8 29.4 3,000 7 LH 〇〇

Σ -7

SGM7A-15A 1.5 4.9 14.7 3,000 2 KG 〇〇SGM7A-20A 2 6.36 19.1 3,000 2.47 KG 〇〇SGM7A-25A 2.5 7.96 23.9 3,000 3.19 KG 〇〇SGM7A-30A 3 9.8 29.4 3,000 7 LH 〇〇SGM7P-15A 1.5 4.77 14.3 3,000 4.02 JE 〇〇SGM7G-09A 0.85 5.39 14.2 1,500 13.9 IG 〇〇SGM7G-13A 1.3 8.34 23.3 1,500 19.9 IG 〇〇SGM7G-20A 1.8 11.5 28.7 1,500 26 IG 〇〇

Sanyo Denki R2

R2AA13120B 1.2 5.7 16 2,000 6 IF 〇〇R2AA13120D 1.2 5.7 16 2,000 6 IF 〇〇R2AA13120L 1.2 5.7 20 2,000 6 IF 〇〇R2AA13180D 1.8 8.6 25 2,000 9 IF 〇〇R2AA13180H 1.8 8.6 22 2,000 9 IF 〇〇R2AA13200D 2 9.5 30 2,000 12.2 IH 〇〇R2AA13200L 2 9.5 24 2,000 12.2 IH 〇〇


17







Attachment code


OMRON

GR88M-G40030H、T 0.4 1.3 3.67 3,000 0.26 BJ - 〇〇〇R88M-G75030H、T 0.75 2.4 7.05 3,000 0.87 DB 〇 - 〇 -R88M-G1K030T 1 3.18 9.1 3,000 1.69 EC 〇 - 〇 -

G5R88M-K40030H、T 0.4 1.3 3.8 3,000 0.26 BJ - 〇〇〇R88M-K75030H、T 0.75 2.4 7.1 3,000 0.87 DB 〇 - 〇 -R88M-K1K030H、T 1 3.18 9.55 3,000 2.03 FB 〇 - 〇 -

KEYENCESV

SV-M040 0.4 1.27 4.46 3,000 0.442 BK - 〇〇〇SV-M075 0.75 2.39 8.36 3,000 1.57 DC 〇 - 〇 -

SV2SV2-M040A 0.4 1.27 4.46 3,000 0.486 BK - 〇〇〇SV2-M075A 0.75 2.39 8.36 3,000 1.59 DC 〇 - 〇 -

Panasonic

MINAS A5

MSMD042G1 0.4 1.3 3.8 3,000 0.26 BJ - 〇〇〇MSMD082G1 0.75 2.4 7.1 3,000 0.87 DB 〇 - 〇 -MHMD042G1 0.4 1.3 3.8 3,000 0.67 BJ - 〇〇〇MHMD082G1 0.75 2.4 7.1 3,000 1.51 DB 〇 - 〇 -MSME042G1 0.4 1.3 3.8 3,000 0.26 BJ - 〇〇〇MSME082G1 0.75 2.4 7.1 3,000 0.87 DB 〇 - 〇 -MSME102G1 1 3.18 9.55 3,000 2.03 FB 〇 - 〇 -

MINAS A6

MSMF042L1 0.4 1.27 3.82 3,000 0.27 BJ - 〇〇〇MSMF082L1 0.75 2.39 7.16 3,000 0.96 DB 〇 - 〇 -MSMF092L1 1 3.18 9.55 3,000 1.26 DB 〇 - 〇 -MSMF102L1 1 3.18 9.55 3,000 2.15 FB 〇 - 〇 -MHMF042L1 0.4 1.27 4.46 3,000 0.56 BJ - 〇〇〇MHMF082L1 0.75 2.39 8.36 3,000 1.56 DB 〇 - 〇 -

FANUC

α iFα iF1/5000 0.5 1 5.3 5,000 3.05 EDB - 〇 - 〇α iF2/5000 0.75 2 8.3 4,000 5.26 EDB 〇 - 〇 -

α iS

α iS2/5000 0.75 2 7.8 4,000 2.91 EDB 〇 - 〇 -α iS2/6000 1 2 6 6,000 2.91 EDB 〇〇〇〇α iS4/5000 1 4 8.8 4,000 5.15 ED 〇 - 〇 -α iS4/6000 1 3 7.5 6,000 5.15 ED 〇 - 〇 -

β iSβ iS2/4000 0.5 2 7 4,000 2.91 EDB 〇 - 〇 -β iS4/4000 0.75 3.5 10 3,000 5.15 ED 〇 - 〇 -

Mitsubishi Electric

J4

HG-MR43 0.4 1.3 3.8 3,000 0.142 BM - 〇〇〇HG-MR73 0.75 2.4 7.2 3,000 0.586 DC 〇 - 〇〇HG-KR43 0.4 1.3 4.5 3,000 0.371 BM - 〇〇〇HG-KR73 0.75 2.4 8.4 3,000 1.26 DC 〇 - 〇 -HG-JR53 0.5 1.6 4.8 3,000 1.52 ECD 〇〇〇〇HG-JR73 0.75 2.4 7.2 3,000 2.09 ECD 〇 - 〇 -HG-JR103 1 3.2 9.6 3,000 2.65 ECD 〇 - 〇 -

J5

HK-KT43W 0.4 1.3 4.5 3,000 0.41 BM - 〇〇〇HK-KT63W 0.6 1.9 6.7 3,000 0.598 BM 〇 - 〇 -HK-KT43UW 0.4 1.3 4.5 3,000 0.726 DG - 〇〇〇HK-KT7M3W 0.75 2.4 8.4 3,000 1.37 DC 〇 - 〇 -HK-KT7M3UW 0.75 2.4 8.4 3,000 2.11 EB 〇 - 〇 -HK-KT434W 0.2 1.3 4.5 1,500 0.41 BM - 〇〇〇HK-KT634W 0.3 1.9 6.7 1,500 0.598 BM 〇 - 〇 -HK-KT7M34W 0.375 2.4 8.4 1,500 1.37 DC 〇 - 〇 -HK-ST52W 0.5 2.4 7.2 2,000 5.9 HFF 〇 - 〇 -

YaskawaElectric

Σ -V

SGMAV-04A 0.4 1.27 3.82 3,000 0.19 BK - 〇〇〇SGMAV-06A 0.55 1.75 5.25 3,000 0.326 BK 〇〇〇〇SGMAV-08A 0.75 2.39 7.16 3,000 0.769 DC 〇 - 〇 -SGMAV-10A 1 3.18 9.55 3,000 1.2 DC 〇 - 〇 -SGMGV-03A 0.3 1.96 5.88 1,500 2.48 ED 〇〇〇〇SGMGV-05A 0.45 2.86 8.92 1,500 3.33 ECD 〇 - 〇 -SGMJV-04A 0.4 1.27 4.46 3,000 0.442 BK - 〇〇〇SGMJV-06A 0.6 1.91 6.69 3,000 0.667 BK 〇 - 〇 -SGMJV-08A 0.75 2.39 8.36 3,000 1.59 DC 〇 - 〇 -

Σ -7

SGM7J-04A 0.4 1.27 4.46 3,000 0.486 BK - 〇〇〇SGM7J-06A 0.6 1.91 6.69 3,000 0.8 BK 〇 - 〇 -SGM7J-08A 0.75 2.39 8.36 3,000 1.59 DC 〇 - 〇 -SGM7A-04A 0.4 1.27 4.46 3,000 0.216 BK - 〇〇〇SGM7A-06A 0.6 1.91 6.69 3,000 0.315 BK 〇 - 〇 -SGM7A-08A 0.75 2.39 8.36 3,000 0.775 DC 〇 - 〇 -SGM7P-04A 0.4 1.27 3.82 3,000 0.409 DF - 〇〇〇SGM7P-08A 0.75 2.39 7.16 3,000 2.1 HA 〇 - 〇 -SGM7G-03A 0.3 1.96 5.88 1,500 2.48 ECD 〇〇〇〇SGM7G-05A 0.45 2.86 8.92 1,500 3.33 ECD 〇 - 〇 -

Sanyo Denki

R2

R2AA06040F 0.4 1.27 4.8 3,000 0.412 BM - 〇〇〇R2AA06040H 0.4 1.27 4.8 3,000 0.412 BM - 〇〇〇R2AA08040F 0.4 1.27 4.4 3,000 1.04 DG - 〇〇〇R2AA08075F 0.75 2.39 8.5 3,000 1.82 DCD 〇 - 〇 -

R5

R5AA06040F 0.4 1.27 4.8 3,000 0.414 BM - 〇〇〇R5AA06040H 0.4 1.27 4.8 3,000 0.414 BM - 〇〇〇R5AA08075D 0.75 2.39 8.5 3,000 1.65 DCD 〇 - 〇 -R5AA08075F 0.75 2.39 7.5 3,000 1.65 DCD 〇 - 〇 -


18







Attachment code


OMRON

G

R88M-G1K530T 1.5 4.77 12.8 3,000 2.59 OB 〇〇R88M-G2K030T 2 6.36 18.4 3,000 3.46 OB 〇〇R88M-G3K030T 3 9.54 27 3,000 6.77 PC 〇〇R88M-G4K030T 4 12.6 36.3 3,000 12.7 ID 〇〇R88M-G5K030T 5 15.8 45.1 3,000 17.8 ID 〇〇

G5

R88M-K1K530H、T 1.5 4.77 14.3 3,000 2.84 OB 〇〇R88M-K2K030H、T 2 6.37 19.1 3,000 3.68 OB 〇〇R88M-K3K030H、T 3 9.55 28.6 3,000 6.5 PC 〇〇R88M-K4K030H、T 4 12.7 38.2 3,000 12.9 ID 〇〇R88M-K5K030H、T 5 15.9 47.7 3,000 17.4 ID 〇〇

KEYENCE

SVSV-M100 0.85 5.39 13.8 1,500 13.9 PB 〇〇SV-M150 1.3 8.34 23.3 1,500 19.9 PC 〇〇SV-M200 1.8 11.5 28.7 1,500 26 PD 〇〇

SV3SV2-M100A 0.85 5.39 14.2 1,500 13.9 PD 〇〇SV2-M150A 1.3 8.34 23.3 1,500 19.9 PD 〇〇SV2-M200A 1.8 11.5 28.7 1,500 26 PD 〇〇

Panasonic

MINAS_A5

MSME152G1 1.5 4.77 14.3 3,000 2.84 OB 〇〇MSME202G1 2 6.37 19.1 3,000 3.68 OB 〇〇MSME302G1 3 9.55 28.6 3,000 6.5 PC 〇〇MSME402G1 4 12.7 38.2 3,000 12.9 ID 〇〇MSME502G1 5 15.9 47.7 3,000 17.4 ID 〇〇MDME102G1 1 4.77 14.3 2,000 4.6 PC 〇〇MDME152G1 1.5 7.16 21.5 2,000 6.7 PC 〇〇MDME202G1 2 9.55 28.6 2,000 8.72 PC 〇〇MDME302G1 3 14.3 43 2,000 12.9 ID 〇〇

MINAS_A6

MSMF152L1 1.5 4.77 14.3 3,000 3.1 OB 〇〇MSMF202L1 2 6.37 19.1 3,000 4.06 OB 〇〇MSMF302L1 3 9.55 28.6 3,000 7.04 PC 〇〇MSMF402L1 4 12.7 38.2 3,000 14.4 ID 〇〇MSMF502L1 5 15.9 47.7 3,000 19 ID 〇〇MHMF102L1 1 4.77 14.3 2,000 22.9 IC 〇〇MHMF152L1 1.5 7.16 21.5 2,000 33.4 IC 〇〇MDMF102L1 1 4.77 14.3 2,000 6.18 PC 〇〇MDMF152L1 1.5 7.16 21.5 2,000 9.16 PC 〇〇MDMF202L1 2 9.55 28.6 2,000 12.1 PC 〇〇MDMF302L1 3 14.3 43 2,000 18.6 ID 〇〇

FANUC

α iFα iF8/3000 1.6 8 29 3,000 25.7 PB 〇〇α iF8/4000 2.2 8 32 4,000 25.7 PB 〇〇

α iS

α iS8/4000 2.5 8 32 4,000 11.7 PB - 〇α iS8/6000 2.2 8 22 6,000 11.7 PB - 〇α iS12/4000 2.7 12 46 3,000 22.8 PD 〇〇α iS12/6000 2.2 11 52 4,000 22.8 PD 〇〇

β iSβ iS8/3000 1.2 7 15 2,000 11.7 PB - 〇β iS12/2000 1.4 10.5 21 2,000 22.8 PD 〇〇β iS12/3000 1.8 11 27 2,000 22.8 PD 〇〇

Mitsubishi Electric

J4

HG-SR51 0.5 4.8 14.3 1,000 11.6 PD 〇〇HG-SR81 0.85 8.1 24.4 1,000 16 PD 〇〇HG-SR102 1 4.8 14.3 2,000 11.6 PD 〇〇HG-SR152 1.5 7.2 21.5 2,000 16 PD 〇〇HG-JR153 1.5 4.8 14.3 3,000 3.79 BA 〇〇HG-JR203 2 6.4 19.1 3,000 4.92 BA 〇〇HG-JR353 3.3 10.5 32 3,000 13.2 PE 〇〇HG-JR503 5 15.9 47.7 3,000 19 PE 〇〇

J5

HK-KT153W 1.5 4.8 16.7 3,000 4.38 BB 〇〇HK-KT203W 2 6.4 19.1 3,000 5.65 BB 〇〇HK-KT202W 2 9.5 28.6 2,000 8.18 BB 〇〇HK-KT1534W 0.75 4.8 21.5 1,500 4.38 BB 〇〇HK-KT2034W 1 6.4 25.5 1,500 5.65 BB 〇〇HK-KT2024W 1 9.5 38.2 1,000 8.18 BB 〇〇HK-ST102W 1 4.8 14.3 2,000 8.65 PD 〇〇HK-ST172W 1.75 8.4 25.1 2,000 11.4 PD 〇〇HK-ST202AW 2 9.5 28.6 2,000 16.9 PD 〇〇HK-ST302W 3 14.3 43 2,000 22.4 PD 〇〇HK-ST1024W 0.6 5.7 17.2 1,000 8.65 PD 〇〇HK-ST1724W 0.85 8.1 24.4 1,000 11.4 PD 〇〇HK-ST2024AW 1 9.5 33.4 1,000 16.9 PD 〇〇HK-ST3024W 1.5 14.3 43 1,000 22.4 PD 〇〇


19







Attachment code


YaskawaElectric

Σ -V

SGMGV-09A 0.85 5.39 13.8 1,500 13.9 PB 〇〇SGMGV-13A 1.3 8.34 23.3 1,500 19.9 PC 〇〇SGMGV-20A 1.8 11.5 28.7 1,500 26 PD 〇〇SGMSV-30A 3 9.8 29.4 3,000 7 IE 〇〇SGMSV-40A 4 12.6 37.8 3,000 9.6 IE 〇〇SGMSV-50A 5 15.8 47.6 3,000 12.3 IE 〇〇SGMSV-70A 7 22.3 54 3,000 12.3 IE - 〇

Σ -7

SGM7A-20A 2 6.36 19.1 3,000 2.47 JD - 〇SGM7A-25A 2.5 7.96 23.9 3,000 3.19 JD 〇〇SGM7A-30A 3 9.8 29.4 3,000 7 IE 〇〇SGM7A-40A 4 12.6 37.8 3,000 9.6 IE 〇〇SGM7A-50A 5 15.8 47.6 3,000 12.3 IE 〇〇SGM7A-70A 7 22.3 54 3,000 12.3 IE - 〇SGM7G-09A 0.85 5.39 14.2 1,500 13.9 PD 〇〇SGM7G-13A 1.3 8.34 23.3 1,500 19.9 PD 〇〇SGM7G-20A 1.8 11.5 28.7 1,500 26 PD 〇〇

Sanyo Denki R2

R2AA13120B 1.2 5.7 16 2,000 6 PC 〇〇R2AA13120L 1.2 5.7 20 2,000 6 PC 〇〇R2AA13120D 1.2 5.7 16 2,000 6 PC 〇〇R2AA13180H 1.8 8.6 22 2,000 9 PC 〇〇R2AA13200L 2 9.5 24 2,000 12.2 PE 〇〇R2AA13180D 1.8 8.6 25 2,000 9 PC 〇〇R2AA13200D 2 9.5 30 2,000 12.2 PE 〇〇


20







Attachment code


OMRON

G

R88M-G40030H、T 0.4 1.3 3.67 3,000 0.26 BJ - 〇 - 〇R88M-G75030H、T 0.75 2.4 7.05 3,000 0.87 DB 〇〇〇〇R88M-G1K030T 1 3.18 9.1 3,000 1.69 EC 〇〇〇〇R88M-G1K530T 1.5 4.77 12.8 3,000 2.59 FB 〇 - 〇 -

R88M-G2K030T 2 6.36 18.4 3,000 3.46 FB - - 〇 -

G5

R88M-K40030H、T 0.4 1.3 3.8 3,000 0.26 BJ - 〇 - 〇R88M-K75030H、T 0.75 2.4 7.1 3,000 0.87 DB 〇〇〇〇R88M-K1K030H、T 1 3.18 9.55 3,000 2.03 FB 〇〇〇〇R88M-K1K530H、T 1.5 4.77 14.3 3,000 2.84 FB 〇 - 〇 -

KEYENCE

SVSV-M040 0.4 1.27 4.46 3,000 0.442 BK - 〇 - 〇SV-M075 0.75 2.39 8.36 3,000 1.57 DC 〇〇〇〇SV-M100 0.85 5.39 13.8 1,500 13.9 HB 〇 - 〇 -

SV2SV2-M040A 0.4 1.27 4.46 3,000 0.486 BK - 〇 - 〇SV2-M075A 0.75 2.39 8.36 3,000 1.59 DC 〇〇〇〇SV2-M100A 0.85 5.39 14.2 1,500 13.9 HBF 〇 - 〇 -

Panasonic

MINAS_A5

MSMD042G1 0.4 1.3 3.8 3,000 0.26 BJ - 〇 - 〇MSMD082G1 0.75 2.4 7.1 3,000 0.87 DB 〇〇〇〇MHMD042G1 0.4 1.3 3.8 3,000 0.67 BJ - 〇 - 〇MHMD082G1 0.75 2.4 7.1 3,000 1.51 DB 〇〇〇〇MSME042G1 0.4 1.3 3.8 3,000 0.26 BJ - 〇 - 〇MSME082G1 0.75 2.4 7.1 3,000 0.87 DB 〇〇〇〇MSME102G1 1 3.18 9.55 3,000 2.03 FB 〇〇〇〇MSME152G1 1.5 4.77 14.3 3,000 2.84 FB 〇 - 〇 -

MDME102G1 1 4.77 14.3 2,000 4.6 HAE 〇 - 〇 -

MINAS_A6

MSMF042L1 0.4 1.27 3.82 3,000 0.27 BJ - 〇 - 〇MSMF082L1 0.75 2.39 7.16 3,000 0.96 DB 〇〇〇〇MSMF092L1 1 3.18 9.55 3,000 1.26 DB 〇〇〇〇MSMF102L1 1 3.18 9.55 3,000 2.15 FB 〇〇〇〇MSMF152L1 1.5 4.77 14.3 3,000 3.1 FB 〇 - 〇 -

MHMF042L1 0.4 1.27 4.46 3,000 0.56 BJ - 〇 - 〇MHMF082L1 0.75 2.39 8.36 3,000 1.56 DB 〇〇〇〇MHMF092L1 1 3.18 11.1 3,000 2.03 DB 〇 - 〇 -

MHMF102L1 1 4.77 14.3 2,000 22.9 HBE 〇 - 〇 -

MDMF102L1 1 4.77 14.3 2,000 6.18 HAE 〇 - 〇 -

FANUC

α iFα iF2/5000 0.75 2 8.3 4,000 5.26 EDB 〇〇〇〇α iF4/5000 1.4 4 15 4,000 13.5 HB 〇 - 〇 -

α iS

α iS2/5000 0.75 2 7.8 4,000 2.91 EDB 〇〇〇〇α iS2/6000 1 2 6 6,000 2.91 EDB 〇〇〇〇α iS4/5000 1 4 8.8 4,000 5.15 ED 〇〇〇〇α iS4/6000 1 3 7.5 6,000 5.15 ED 〇〇〇〇

β iSβ iS2/4000 0.5 2 7 4,000 2.91 EDB 〇〇〇〇β iS4/4000 0.75 3.5 10 3,000 5.15 ED 〇〇〇〇β iS8/3000 1.2 7 15 2,000 11.7 HB 〇 - 〇 -

Mitsubishi Electric

J4

HG-MR43 0.4 1.3 3.8 3,000 0.142 BM - 〇 - 〇HG-MR73 0.75 2.4 7.2 3,000 0.586 DC 〇〇〇〇HG-KR43 0.4 1.3 4.5 3,000 0.371 BM - 〇 - 〇HG-KR73 0.75 2.4 8.4 3,000 1.26 DC 〇〇〇〇HG-SR51 0.5 4.8 14.3 1,000 11.6 HFF 〇 - 〇 -

HG-SR52 0.5 2.4 7.2 2,000 7.26 HFF 〇〇〇〇HG-SR102 1 4.8 14.3 2,000 11.6 HFF 〇 - 〇 -

HG-JR53 0.5 1.6 4.8 3,000 1.52 ECD - 〇 - 〇HG-JR73 0.75 2.4 7.2 3,000 2.09 ECD 〇〇〇〇HG-JR103 1 3.2 9.6 3,000 2.65 ECD 〇〇〇〇HG-JR153 1.5 4.8 14.3 3,000 3.79 ECD 〇 - 〇 -

J5

HK-KT43W 0.4 1.3 4.5 3,000 0.41 BM - 〇 - 〇HK-KT63W 0.6 1.9 6.7 3,000 0.598 BM 〇〇〇〇HK-KT43UW 0.4 1.3 4.5 3,000 0.726 DG - 〇 - 〇HK-KT7M3W 0.75 2.4 8.4 3,000 1.37 DC 〇〇〇〇HK-KT103W 1 3.2 11.1 3,000 1.68 DC 〇 - 〇 -

HK-KT7M3UW 0.75 2.4 8.4 3,000 2.11 EB 〇〇〇〇HK-KT103UW 1 3.2 11.1 3,000 2.74 EB 〇 - 〇 -

HK-KT153W 1.5 4.8 16.7 3,000 4.38 EB 〇 - 〇 -

HK-KT434W 0.2 1.3 4.5 1,500 0.41 BM - 〇 - 〇HK-KT634W 0.3 1.9 6.7 1,500 0.598 BM 〇〇〇〇HK-KT7M34W 0.375 2.4 8.4 1,500 1.37 DC 〇〇〇〇HK-KT1034W 0.5 3.2 11.1 1,500 1.68 DC 〇 - 〇 -

HK-ST52W 0.5 2.4 7.2 2,000 5.9 HFF 〇〇〇〇HK-ST102W 1 4.8 14.3 2,000 8.65 HFF 〇 - 〇 -

HK-ST524W 0.3 2.9 11.5 1,000 5.9 HFF 〇 - 〇 -

HK-ST1024W 0.6 5.7 17.2 1,000 8.65 HFF 〇 - 〇 -


21







Attachment code


YaskawaElectric

Σ -V

SGMAV-04A 0.4 1.27 3.82 3,000 0.19 BK - 〇 - 〇SGMAV-06A 0.55 1.75 5.25 3,000 0.326 BK - 〇〇〇SGMAV-08A 0.75 2.39 7.16 3,000 0.769 DC 〇〇〇〇SGMAV-10A 1 3.18 9.55 3,000 1.2 DC 〇〇〇〇SGMGV-03A 0.3 1.96 5.88 1,500 2.48 ED 〇〇〇〇SGMGV-05A 0.45 2.86 8.92 1,500 3.33 ECD 〇〇〇〇SGMGV-09A 0.85 5.39 13.8 1,500 13.9 HB 〇 - 〇 -

SGMSV-10A 1 3.18 9.54 3,000 1.74 FDF 〇〇〇〇SGMSV-15A 1.5 4.9 14.7 3,000 2 FDF 〇 - 〇 -

SGMJV-04A 0.4 1.27 4.46 3,000 0.442 BK - 〇 - 〇SGMJV-06A 0.6 1.91 6.69 3,000 0.667 BK 〇〇〇〇SGMJV-08A 0.75 2.39 8.36 3,000 1.59 DC 〇〇〇〇

Σ -7

SGM7J-04A 0.4 1.27 4.46 3,000 0.486 BK - 〇 - 〇SGM7J-06A 0.6 1.91 6.69 3,000 0.8 BK 〇〇〇〇SGM7J-08A 0.75 2.39 8.36 3,000 1.59 DC 〇〇〇〇SGM7A-04A 0.4 1.27 4.46 3,000 0.216 BK - 〇 - 〇SGM7A-06A 0.6 1.91 6.69 3,000 0.315 BK 〇〇〇〇SGM7A-08A 0.75 2.39 8.36 3,000 0.775 DC 〇〇〇〇SGM7A-10A 1 3.18 11.1 3,000 0.971 DC 〇 - 〇 -

SGM7A-15A 1.5 4.9 14.7 3,000 2 FDF 〇 - 〇 -

SGM7P-04A 0.4 1.27 3.82 3,000 0.409 DF - 〇 - 〇SGM7P-08A 0.75 2.39 7.16 3,000 2.1 HA 〇〇〇〇SGM7P-15A 1.5 4.77 14.3 3,000 4.02 HA 〇 - 〇 -

SGM7G-03A 0.3 1.96 5.88 1,500 2.48 ECD 〇〇〇〇SGM7G-05A 0.45 2.86 8.92 1,500 3.33 ECD 〇〇〇〇SGM7G-09A 0.85 5.39 14.2 1,500 13.9 HBF 〇 - 〇 -

Sanyo Denki

R2

R2AA06040H 0.4 1.27 4.8 3,000 0.412 BM - 〇 - 〇R2AA06040F 0.4 1.27 4.8 3,000 0.412 BM - 〇 - 〇R2AA08040F 0.4 1.27 4.4 3,000 1.04 DG - 〇 - 〇R2AA08075F 0.75 2.39 8.5 3,000 1.82 DCD 〇〇〇〇R2AAB8100H 1 3.18 11.6 3,000 2.38 EBD 〇 - 〇 -

R2AA10075F 0.75 2.39 8.6 3,000 2 FEE 〇〇〇〇R2AA13050H 0.55 2.6 9 2,000 3.1 HFE 〇〇〇〇R2AA13050D 0.88 2.6 7 2,000 3.1 HFE 〇〇〇〇R2AA13120B 1.2 5.7 16 2,000 6 HFE 〇 - 〇 -

R2AAB8075F 0.75 2.38 11 3,000 1.64 EBD 〇 - 〇〇R2AAB8100F 1 3.18 14.3 3,000 2.38 EBD 〇 - 〇 -

R2AA10100F 1 3.18 14.3 3,000 3.5 FEE 〇 - 〇 -

R2AA13120D 1.2 5.7 16 2,000 6 HFE 〇 - 〇 -

R5

R5AA06040H 0.4 1.27 4.8 3,000 0.414 BM - 〇 - 〇R5AA08075D 0.75 2.39 8.5 3,000 1.65 DCD 〇〇〇〇R5AA06040F 0.4 1.27 4.8 3,000 0.414 BM - 〇 - 〇R5AA08075F 0.75 2.39 7.5 3,000 1.65 DCD 〇〇〇〇


22

Oil Plug, Oil Level, Drain Position (Oil lubrication types)Unit: mm

Mounting position 1 2 3 4 5 6

RGV040

0B2

A2,C

20C1B1A1

R surface

0

B2

A2,C

2

0A1

B1C1

R surface

A2,C

2

0 B2

0

A1

B1

C1

W surface

A2,C

2

0B2

0C1

B1

A1

W surface

0

C2

B2

0

C1B1

0

A2

0

A1

S surface

W surface

0A2

B2

0

A1

B1

0C2

0

C1

W surface

S surface

A Oil plug Rc1/4 Oil plug Rc1/4 Oil plug Rc1/4 Oil plug Rc1/4 Oil plug Rc1/4 Oil plug Rc1/4A1 55 14 26 89 20 20A2 53.5 53.5 56 56 57.5 57.5B Oil level Oil level Oil level Oil level Oil level Oil levelB1 32.5 32.5 39.5 75.5 38 38B2 68.5 68.5 38 38 75.5 75.5C Drain Rc1/4 Drain Rc1/4 Drain Rc1/4 Drain Rc1/4 Drain Rc1/4 Drain Rc1/4C1 14 55 89 26 20 20C2 53.5 53.5 56 56 57.5 57.5

Oil amount (L) 0.09 0.1 0.13 0.12 0.05 0.14

RGV063

0

C1

A1

0A2

C20B2

0

B1

U surface R surface

0

A2

C2

0A1C1

0

B2

0

B1

R surface U surface

0A

2,C

2

B2

0A1

B1

C1

W surface

A2,C

2 0

B2

0C1

B1

A1

W surface

0

C2

B2

0

C1B1

0

A2

0

A1

S surface

W surface

0A2

B2

0

A1

B1

0C2

0

C1

W surface

S surface

A Oil plug Rc1/4 Oil plug Rc1/4 Oil plug Rc1/4 Oil plug Rc1/4 Oil plug Rc1/4 Oil plug Rc1/4A1 55 20 32 123 23.5 23A2 98 77.5 32 32 77.5 77.5B Oil level Oil level Oil level Oil level Oil level Oil levelB1 36.5 36.5 58.5 96.5 44 44B2 107 107 44 44 96.5 96.5C Drain Rc1/4 Drain Rc1/4 Drain Rc1/4 Drain Rc1/4 Drain Rc1/4 Drain Rc1/4C1 20 55 123 32 23 23.5C2 77.5 98 32 32 77.5 77.5

Oil amount (L) 0.15 0.16 0.2 0.19 0.1 0.21

RGV080

0

C1

A1

0A2

C20B2

0

B1

U surface R surface

0

A2

C2

0A1C1

0

B2

0

B1

R surface U surface

0A

2,C

2

B2

0A1

B1

C1

W surfaceA

2,C

2 0

B2

0C1

B1

A1

W surface

0

C2

B2

0

C1B1

0

A2

0

A1

S surface

W surface

0A2

B2

0

A1

B1

0C2

0

C1

W surface

S surface

A Oil plug Rc3/8 Oil plug Rc3/8 Oil plug Rc3/8 Oil plug Rc3/8 Oil plug Rc1/4 Oil plug Rc3/8A1 73 22 41 149 29 31A2 120 95 34 34 95 95B Oil level Oil level Oil level Oil level Oil level Oil levelB1 47 47 66 124 51 51B2 133 133 51 51 124 124C Drain Rc3/8 Drain Rc3/8 Drain Rc3/8 Drain Rc3/8 Drain Rc3/8 Drain Rc1/4C1 22 73 149 41 31 29C2 95 120 34 34 95 95

Oil amount (L) 0.31 0.35 0.43 0.42 0.18 0.48

RGV100

0

C1

A1

0A2

C20B2

0

B1

U surface R surface

0

A2

C2

0A1C1

0

B2

0

B1

R surface U surface

0A

2,C

2

B2

0A1

B1

C1

W surface

A2,C

2 0

B2

0C1

B1

A1

W surface

0

C2

B2

0

C1B1

0

A2

0

A1

S surface

W surface

0A2

B2

0

A1

B1

0C2

0

C1

W surface

S surface


Oil amount (L) 0.46 0.56 0.7 0.68 0.37 0.65

RGV125

0

C1

A1

0A2

C20B2

0

B1

U surface R surface

0

A2

C2

0A1C1

0

B2

0

B1

R surface U surface

0A

2,C

2

B2

0A1

B1

C1

W surface

A2,C

2 0

B2

0C1

B1

A1

W surface

0

C2

B2

0

C1B1

0

A2

0

A1

S surface

W surface

0A2

B2

0

A1

B1

0C2

0

C1

W surface

S surface


Oil amount (L) 0.79 1.01 1.22 1.2 0.7 1.1

23

Customer’s Company, Department

Name

A）Application

C）Motion pattern E）Intended servomotor

F）Mounting direction of servomotor

G）Attachment code

B）Overview drawing, loads, operating environment, etc.(Include any tables, workpieces, or jigs that will be attached to the RGV output shaft, and any loads that will be applied during rotation.)

Email

Tel

FaxAddress

Table diameter ： D1

Axial/radial load

Load applied to output shaft

Moment load

Table weight ： W1

Jig P.C.D. ： D2

Weight per jig ： W2

Weight per workpiece ： W3

Jig quantity ： n2

Workpiece quantity ： n3

Workpiece P.C.D. ： D3

[mm]

[kg]

[kg]

[kg]

[pcs]

[pcs][N･m][N]

[mm]

[mm]

TimeAcceleration time

Constant speed time

Decelerationtime

Dwell time

Manufacturer

Model No.

Motor power (rated output)

RGV-2020/10E-S Contact at Sankyo

Cycle Time

Index period (angle of rotation per cycle)

[sec][kW]

※

※Required information

Circle applicable answer.

T surface (right side viewed from front)U surface (left side viewed from front)

Outp

ut S

haft

Spee

d

[deg]※

RGV seriesModel Sizing Form for the RollerDrive®

D）Lubrication method and position/directionPosition/direction :

Please choose one. H）Options□ None 　　□ A ： Rustproof □ B ： Rustproof/dustproof/waterproof　

□ W surface toward bottom □ V surface toward bottom □ U surface toward bottom □ T surface toward bottom□ R surface toward bottom □ S surface toward bottom

Lubricationmethod :

□ Grease lubrication□ Oil lubrication

D₁

D₂D₃

W₂

W₃

W₁

Attention: Date:

Our contactperson:

24

Handling

▲

Installation SiteThe RollerDrive products with standard specifications should be installed in locations where they can be easilychecked and maintained. Specifically:

・ Environment temperature from 5 to +40℃Depending on the operation pattern, the product surface temperature may rise because of heating in the motor or the product itself. Ensure cooling to 60℃ or less using a fan or the like.

・ Humidity under 85% (no condensation)・ Non vacuum or extreme pressure・ No exposure to water, oil, chemicals, dusts, etc.・ No existence of explosive gas, other hazardous gas, or radio active materials・ No direct sunlight・ Excessive shock or force does not act・ Minimal electromagnetic noise, and isolated from currents (Take particular care near welders, etc.).・Minimum electro magnetic noise (be cautious on welding machines)

▲

Installation ProcedureThe RollerDrive should be put in the operating position and installed on a smooth, robust place. After installing the main unit, attach the drive target to the output flange.

Tightening torque (Table 1)Housing threads (aluminum) Unit：N･m

Tightening torque (Table 2)Output shaft threads (iron-based) Unit：N･m

Thread size Specified tightening torque（DIN6.8） Thread size Specified tightening torque（DIN10.9）To prevent the bolts from loosening inadvertently, apply Loctite 242 or equivalent and use a torque wrench to apply the specified torque. (Refer to the tables on the left for the tightening torque.)

M6 7.5 M4 4.1M8 18.5 M5 8.5M10 36.0 M6 14.0M12 63.0 M8 35.0M16 158.0 M10 69.0

▲

LubricationRGV series products are available in one of two lubrication methods: Grease lubrication, which is the basic specification, or oil lubrication, which allows for high-speed rotation.

• Grease lubricationUnits are generally maintenance-free, eliminating the need for regular grease replacement.(Please contact Sankyo for any questions about lubrication.)

Lubricating grease: Epnoc grease AP (N) 2 from JXTG Nippon Oil & Energy Corporation

• Oil lubricationUnits use high-performance oil for lubrication. Although the oil used for lubrication is scientifically and thermally stable, change the oil after every 3,000 hours of operation to ensure a longer product service life. The oil level indicator can be used to check the condition of the lubricating oil. Stop operation before checking the condition.Check the amount and color of the oil. If the oil amount has decreased, or if discoloration is found, replace the oil regardless of the operating time. Note that fine bubbles may appear in the oil during operation. This does not indicate a problem with the oil quality.

* When changing the oil, use only the lubricating oil specified below.Using an oil other than the one specified below for lubrication may shorten the product’s service life or cause the components to deteriorate.

Specified standard lubricating oil: Mobil SHC629 (VG150)

Please refer to the instruction manual for product handling details.

25

RGV series

Handling

▲

Rustproof/dustproof/waterproof specificationsRustproof/dustproof/waterproof specifications are available protection options for RGR series units.Following tests conducted under IP67 testing conditions (IEC 60529), TÜV Rheinland Japan Ltd., has confirmed that the RGR series housing is waterproof and dustproof.(Tests were performed with the RGV063 (gear ratio: 24).)

IP is the abbreviation for International Protection, which indicates the degree of protection necessary to prevent foreign matter (steel balls, copper wires, dust, water, etc.) from entering the housing of electrical or mechanical products. A rating of IP6X indicates complete protection against dust, and IPX7 indicates that there is no intrusion of water even if a product is submerged in water at a specified pressure (at 15 cm to 1 m below the surface) for a certain amount of time (at least 30 minutes).

• A rustproof/dustproof/waterproof rating is not a guarantee against malfunction or for a specific operational lifetime.• Units are not protected from the intrusion of all solids and liquids under all environments.• RGV series units are rated IP54 or equivalent unless the dustproof/waterproof option is specified.

Limitations on the use of this product■ This product cannot be used in applications where operation of the product has a direct impact in human life, or can

cause bodily harm to people.

The scope of these use limitations includes the following applications:ⅰ . Medical equipmentⅱ . Nuclear power related equipmentⅲ . Aerospace equipmentⅳ . Equipment for handling explosive, corrosive or toxic substances etc.

■ Please consult with our company if you are considering use in one of the above applications.

■ If there is a possibility that this product will be used in a final use location outside Japan, in weapons or equipment for weapon manufacture, then it may be subject to regulation due to the Foreign Exchange and Foreign Trade Control Law. Please take extra care with regard to the application and region of use, and properly submit applications and follow procedures if necessary.

Notes on information■ Specifications, dimensions and other information relating to this product provided in this catalog are subject to

change without prior notice.

■ The information in this catalog is current as of October 2020.

■ Patent rights and copyrights for some mechanisms, trademarks, images, drawings and other material in this catalog all belong to Sankyo Seisakusho Co. Copying, reuse or distribution of any material in this catalog without the permission of Sankyo Seisakusho is forbidden.

26

Dealers

http://www.sankyo-seisakusho.co.jp

* Product specifications may be changed without prior notice. Before ordering, pleasecontact our sales department.All patent rights and copyrights for parts of mechanisms described in this catalog andfor trademarks, images, drawings etc. belong to Sankyo Seisakusho Co."RollerDrive" is a registered trademark of Sankyo Seisakusho Co. in Japan.

Group CompanySANKYO AMERICA INC.10655 State Route 47 Sidney, Ohio, 45365 U.S.A.PHONE:+1-(0)937-498-4901・FAX:+1-(0)937-498-9403E-mail:[email protected]

SANKYO KOREA CO., LTD.1449-48 Seobu-ro, Gwonseon-gu, Suwon-si, Gyeonggi-do, 16643 KoreaPHONE:+82-(0)31-895-5991・FAX:+82-(0)31-895-6607E-mail:[email protected]

SANKYO CHINA TRADING CO., LTD.[ SHANGHAI HEAD OFFICE ]Room 1103, Block B, No.391 Guiping Road,Shanghai 200233 ChinaPHONE:+86-(0)21-5445-2813・FAX:+86-(0)21-5445-2340E-mail:[email protected]

[ SHENZHEN BRANCH OFFICE ]Unit 19J, Tower B, NEO Building, No.6009 Shennan Avenue,Futian District, Shenzhen ChinaPHONE:+86-(0)755-8230-0270・FAX:+86-(0)755-8236-4605

[ TIANJIN BRANCH OFFICE ]Room 1905, Pengzhanfeiwo Building A, Crossing Yale Road Yaolin Road, Xiqing District, Tianjin 300380 ChinaPHONE:+86-(0)22-2312-1005・FAX:+86-(0)22-2312-1007

[ GUANGZHOU BRANCH OFFICE ]Room 913, Xing Pu buliding, No.12 Guan Hong Road,Guangzhou Economic Development Zone, Huang Pu, Guang Zhou 510670 ChinaPHONE:+86-(0)20-8985-1846・FAX:+86-(0)20-8225-7346

[ WUHAN BRANCH OFFICE ]Room 2301, Taihe Square, No.134 Wusheng Road, Wuhan, Hubei Province ChinaPHONE:+86-(0)27-8568-5818・FAX:+86-(0)27-8568-2818

HANGZHOU SANKYO MACHINERY CO., LTD.No.2518 Jiang Dong 2 Road, Hangzhou Jiang Dong Industrial Park,Xiaoshan Zone, Hangzhou, Zhejiang, ChinaPHONE:+86-(0)571-8283-3311・FAX:+86-(0)571-8283-1133

RODAX VIETNAM CO., LTD.Plot No. M1, Thang Long Industrial Park IIDi Su, My Hao, Hung Yen, Viet NamPHONE:+84-(0)221-3-589701・FAX:+84-(0)221-3-589708

SANKYO WORKS (THAILAND) CO., LTD.9/31 Moo 5, Phaholyotin Road, Klongnueng,Klong Luang, Patumthani 12120 ThailandPHONE:+66-(0)2-516-5355・FAX:+66-(0)2-068-0931E-mail:[email protected]

RODAX VIETNAM CO., LTD. SINGAPORE

ITALY

SANKYO WORKS（THAILAND）CO., LTD.

TAIWAN

OFFICEHEAD OFFICE

FACTORY

SANKYO AMERICA INC.

AGENT

SANKYO KOREA CO., LTD.

THAILAND

INDIA

HANGZHOU SANKYO MACHINERY CO., LTD.

SANKYO CHINA TRADING CO., LTD.

SANKYO SHIZUOKA SEISAKUSHO CO.SANKYO SEISAKUSHO CO.

■ Head Office 3-37-3 Tabatashinmachi, Kita-ku, Tokyo, Japan 114-8538PHONE: +81-（0）3-3800-3330FAX: +81-（0）3-3800-3380E-MAIL: [email protected]

■ TAIWAN No.21, Ln.152, Jianxing Rd., Sanhe Vil., Daya Dist., Taichung City 42876, Taiwan (R.O.C.)PHONE. +886-（0）4-2359-4048FAX. +886-（0）4-2359-4720E-MAIL: [email protected]

Mon-Fri AM8：30-12：00 PM13：00-17：30 UTC + 09：00 （JST）（Except public holidays and company holidays）

(International department )

RGV-2020/10E(AZ)

Global network

Contact us

rgv standard model · rgv series zero-backlash positioner standard model features varied lineup of...

Documents