rgb 160 - led neon flex · dimensions 11.5 x 29mm / .45 x 1.14in 11.5 × 21mm / .45 × .83in output...
TRANSCRIPT
For more informationplease contacttoll free: 1.888.580.NEON (6366)email: [email protected]
Vivid RGB delivers remarkably fluid color transitions by utilizing advanced DMX and LED dimming technology. Using our exclusive Triple-Extrusion technology, Vivid RGB brings you discernibly richer, truer color. Visibly uniform and flicker free, Vivid RGB transitions like no other – even in high frame-rate environments. Seen by millions at the 2014 Grammy Awards.
Features and Benefits• Seamless source of dot-free illumination• Epistar SMD Light Source• Over 16 Million Color Possibilities • Flat Surface 160° Beam Angle • Bending Diameter of 120 millimeters/ 4.72 inches • Fabricated with Eco-friendly, UV-resistant PVC materials • Three Year Manufacturer’s Warranty
RGB 160
www.ledneonflex.com
Color Lumen/m Power/m Red
Green
Blue
R+G+B(white)
Vivid RGB
Color CCT Wave Length
Red 620 - 630 Nanometer
Green 520 - 530 Nanometer
Blue 465 - 470 Nanometer
Technical Specifications Colors Available
www.ledneonflex.com
*For DMX controller inquiries please check our website or call for customer service.**Photometric Data available upon request or at www.ledneonflex.com
Profiles
Dimensions 11.5 x 29mm / .45 x 1.14in 11.5 × 21mm / .45 × .83in
Output
LED Light SMD, RGB Light Chip
Running Length Single feed: 10 meters / 32.8 feet Double feed: 20 meters / 65.6 feet
Light Surface Rounded profile 270° Square profile 160°
Lumen Maintenance 70,000 Hours L70 @ 25°C : 90,000 L50 @ 25° 50,000 Hours L70 @ 50° : 70,000 Hours L50 @ 50°C
Chromaticity Ordinates x: 0.4715 y: 0.4276 u: 0.2624 v: 0.5354
Color Bin Tolerances +/- 3 %
Efficacy (lm/w) 19.88
CRI 88
Electrical
Input Voltage 24V DC Constant Voltage
Power Consumption 12 watts per meter / 3.66 watts per foot
Power Factor ≤ 1
LED Count 60 LEDs per meter / 18 LEDs per foot
Dimming 110-277v 0- 10v & Magnetic Low Voltage
Physical
Materials Polyvinyl Chloride (PVC)
LED Spacing 16.7 millimeter / .66 inch
Cutting Length 100 millimeters / 3.94 inches - 6 LEDs
Package Size: 340 × 340 ×240 millimeters / 340 × 340 × 120 millimeters / 13.4 × 13.4 × 9.4 inches 13.4 × 13.4 × 4.7 inches
Package Weight: 10.5 kilograms / 23.1 pounds 8 kilograms / 17.6 pounds
Thermal Management Cool to the Touch, Free Air Convection
Fixture Connections Front & End Leader Cables
Bend Tolerances
Maximum Diameter 120 millimeters / 4.7 inches (lateral bending only)
Temperature Ranges
Ambient -30° to 45° Celsius / -22° to 113° Fahrenheit
Operating -25° to 45° Celsius / -13° to 113° Fahrenheit
Humidity 0- 95% Non Condensing
Dependability
Warranty 3 years
Safety
Certification Tested to UL & CSA by Underwriters Laboratory for use in USA and Canada, complies with California Title 24 Requirements, Lighting Facts. Exceeds ANSI C78.377A, CE & RoHS Compliant.
IP Rated IP68 Factory Order/ IP68 with Accessories
Lumen Count
>201lm
>751lm
>151m
>110lm
3 W
4.5 W
4.5 W
12 W
RGB 160
Mounting
Tolerance of the light is ±0.2mm.
www.ledneonflex.com
RGB 160
3 Year
3Year
Photometric Data
Minimum Bend Diameter
4.7 inch
Candle Power Distribution Illuminance Characteristics
Bottom Exit CableConnects light to power supply with pre-installed bottom cable, IP68.The following cable lengths are available. (For longer lengths please contact us)
Length
0.3m / 0.98’ 1m / 3.2’3m / 9.8’
Side Exit CableConnects light to power supply with pre-installed side cable, IP68.The following cable lengths are available. (For longer lengths please contact us)
Length
0.3m / 0.98’ 1m / 3.2’3m / 9.8’
www.ledneonflex.com
RGB 160
Ideal for a seamless look on long runs. Please Note: Three week lead time plus shipping. Factory orders only.
End Exit CableConnects light to power supply with pre-installed end cable, IP68.The following cable lengths are available. (For longer lengths please contact us)
Length
0.3m / 0.98’ 1m / 3.2’3m / 9.8’
End Cap
Pre-installed termination protectionof the light, IP68.
Part NumberLN-11X21-FA-EC
Part Number
LN-11X21-RGB-FA-PFB
LN-11X21-RGB-FA-PFB-1m
LN-11X21-RGB-FA-PFB-3m
Part NumberLN-11X21-RGB-FA-PFS
LN-11X21-RGB-FA-PFS-1m
LN-11X21-RGB-FA-PFS-3m
Part NumberLN-11X21-RGB-FA-PFE
LN-11X21-RGB-FA-PFE-1m
LN-11X21-RGB-FA-PFE-3m
Injection-moulded End Fittings
JumperConnects two pieces of light together with a flexible cable. IP68 connector.
Lengths Available
0.3m / 0.98’ 1m / 3.2’3m / 9.84’
www.ledneonflex.com
RGB 160
End FittingsStocked accessories. Standard on non-factory orders.
Power ConnectorConnects light to power lead, IP68.The following cable lengths are available. (For longer lengths please contact us)
Length
0.3m / 0.98’ 1m / 3.2’3m / 9.8’
End CapTermination protection of the light. IP68.
Part Number
LN-11X21-IP68-END
Tail plug * 1Silicone gasket *1Aluminum Billet * 1Crimp Plate * 1
Power T-FeedConnects two pieces of light together with a T joint, powered from the middle. IP68 connector.
Lengths Available (L1 & L2)
0.3m / 0.98’
T joint * 1 (Four-pin)Silicone gasket * 2Aluminum Billet * 2Crimp Plate * 2
Seamless SpliceConnects two pieces of light togetherseamlessly.
Part Number
LN-11-IP40-RGB-SPL
Silicone gasket * 1Joint PCB * 1U steel plate * 2Crimp Plate * 2
Please Note: Indoor only.
Feed connector * 1 (Four-pin), Silicone gasket * 1, Aluminum Billet * 1, Crimp Plate*1
Part NumberLN-11X21-IP68-RGB-300-L / LN-11X21-IP68-RGB-300-R
LN-11X21-IP68-RGB-1M-L / LN-11X21-IP68-RGB-1M-R
LN-11X21-IP68-RGB-3M-L / LN-11X21-IP68-RGB-3M-R
Part NumberLN-11X21-IP68-RGB-T
Double-end connector *1(Four-pin), Silicone gasket * 2, Aluminum Billet * 2, Crimp Plate * 2
Part NumberLN-11X21-IP68-RGB-J30
LN-11X21-IP68-RGB-J1m
LN-11X21-IP68-RGB-J3m
www.ledneonflex.com
RGB 160Mounting ChannelAluminum Mounting Channel
Please Note: Production Order Only. 21 Day Lead Time.
.94
inch
.55 inch
/.13 inch
/.13 inch
.86
inch
.54 inch
Plastic Mounting Channel
50 mm / 2 inch
1000 mm / 39.37 inch
25 mm / .98 inch
100 mm / 3.93 inch
/
200 mm / 7.87 inch
Φ 3.5 mm / .13 inch
Φ 3.5 mm / .13 inch
Basic, 160 & 270 Models
Basic, 160 & 270 Models
Part Number
LN-11-AL-CLIP
LN-11-AL-1M-CHAN
300 mm / 11.81 inch
1000 mm / 39.37 inch
50 mm / 1.96 inch
100 mm / 3.93 inch
200 mm / 7.87 inch
200 mm / 7.87 inch
Φ 3.5 mm / .13 inch
Φ 3.5 mm / .13 inch
Basic, 160 & 270 Models
Basic, 160 & 270 Models
Part Number
LN-11-PL-CLIP
LN-11-PL-1M-CHAN
www.ledneonflex.com
RGB 160Self-locking Aluminum Mounting Channel
Uses: Ceilings and Vertical Installations
CutterMale and Female Connectors
Optional Accessories
*Installation guide available upon request or at www.ledneonflex.com
Please Note: Factory order only.
Part Number Naming Convention
LN-11X21-24-RGB
RGB - Fixture Color
24V - Voltage
11X21 - Profile Size
LN - LED Neon Flex
Φ 3.5 mm / .13 inch
Φ 3.5 mm / .13 inch
50 mm / 1.96 inch
1000 mm / 39.37 inch
25 mm / .98 inch
100 mm / 3.93 inch
/
200 mm / 7.87 inch
/
350 mm / 13.77 inch
25 mm / .98 inch
150 mm / 5.9 inch
Part Number
LN-11-PL-CLIP
LN-11-AL-1M-CHAN-SL
RGB 160
www.ledneonflex.com
Performance
Optical TestingPhotometric test-integrating sphere systemPhotometric test-goniophotometer systemIlluminance efficiency ratioUniformity of lighting surface (led neon flex light)RGB color mixture uniformity (led neon flex light)Lumen maintenance testColor-coordinate shift
Electrical TestingNormal Temperature Test (77°F)Normal Temperature Test(104°F)
Reliability TestingLifetime testElectrical insulation testDielectric voltage withstand testWaterproof testHi-Lo Temperature impactUltraviolet (UV) light exposureSalt spray testAnti-cracking test (-13°F)Connector pull test
Mechanics TestingPull test (Connector, Body)Impact testBending fatigue resistance test
Standard/Reference value/Description
IES LM 79 (lumen, CCT, CRI, XY, SDCM, wave length)IES LM 79(lumen intensity distribution & Lux diagram)Product specification sheetEvaluate indirect glareEvaluate the uniformity of colorIES LM 80ANSI C78.377
UL1598, IEC60598-1UL1598, IEC60598-1
IS TM 21UI2388, IEC60598-1, >4M ΩUI2388, IEC60598-1, >1.5KVIP68/IP67/IP65-68°F – 140°FASTM G 26. Exposure Method 1IEC68-2-11Assess PVC’s anti-cracking property under low temp. 50N
UI2388IEC 62262, UL2388UL2388, IEC60598-1
Testing Results for LED Neon Flex
RGB 160
www.ledneonflex.com
Charts
RGB 160
www.ledneonflex.com
Wavelength of Color Light
Power Supply Configuration TableThe maximum length of light for different power supply ratings.
Note- 1. “*” Indicates the power supply is over loaded. 10M/32.8Ft must have power cable installed on both ends of the strip. 2. Example: 18W/83% - 18W is the rated power and 83% is the power efficiency.
RGB 160
Warehouse Locations
www.ledneonflex.com
United States6230 W. Desert Inn Rd.Las Vegas, NV 89146T: (702) 749-5316
Canada30 Milner RoadMoncton, NB E1E 2R8T: (702) 749-5319
For more informationplease contacttoll free: 1.888.580.NEON (6366)email: [email protected]
www.glls.com
Project Name:
Notes:
Project Details