review test fire technology (pre-test)

39
REVIEW TEST Fire Technology (Pre-test) Prepared by: Dr. Miller F. Peckley, CSP, CSMS, CST MFP Review and Training Services

Upload: york

Post on 22-Jan-2016

66 views

Category:

Documents


0 download

DESCRIPTION

REVIEW TEST Fire Technology (Pre-test). Prepared by: Dr. Miller F. Peckley, CSP, CSMS, CST MFP Review and Training Services. Instructions: Choose the letter corresponding to your answer, erase answers will be marked wrong. - PowerPoint PPT Presentation

TRANSCRIPT

Page 1: REVIEW TEST Fire Technology (Pre-test)

REVIEW TESTFire Technology

(Pre-test)

Prepared by: Dr. Miller F. Peckley, CSP, CSMS, CST

MFP Review and Training Services

Page 2: REVIEW TEST Fire Technology (Pre-test)

Instructions: Choose the letter corresponding to your answer, erase

answers will be marked wrong.

1. What will happen if the temperature of a fuel is raised to its ignition temperature?

a) auto-ignition (self –ignition) will occurb) Oxidation will take place c) Chemical reaction takes place

Page 3: REVIEW TEST Fire Technology (Pre-test)

2. The fire tetrahedron differ from the fire triangle and that a fourth element has been added. What is the added elements?

– Combustion– Pyrolosis– Oxidation– Chemical chain reaction

Page 4: REVIEW TEST Fire Technology (Pre-test)

• 3. What is the composition of a typical poisonous smoke?

• a) Contains combustion products composed of atoms and molecules forming the poisonous fuel, together with the oxidizer that support combustion

• b) Contains oxidizing agents that supports combustion.• c) Contains the chemical chain reaction that takes place

during combustion.• d) Contains the proportion of vapor-to-air in which the

mixture will ignite.

Page 5: REVIEW TEST Fire Technology (Pre-test)

• 4. Spontaneous ignition starts as a result of what action?

• a) auto-ignition

• b) combustion

• c) evaporation

• d) chemical chain reaction

Page 6: REVIEW TEST Fire Technology (Pre-test)

• 5. The term Flashpoint is used to expense what condition?

• a) Fuel evaporizing whether or not it is evaporizing fast enough to keep burning.

• b) The degree of heat necessary to ignite flammable vapors.

• c) The amount of fuel vapor that mixed with air to form flammable mixture.

• d) A condition whereby the surface area of fuel is exposed to the air.

Page 7: REVIEW TEST Fire Technology (Pre-test)

• 6. What are oxidizing agents and what effects do they have on fire?

• a) Are chemical compounds which when heated give oxygen and support the burning flammable materials.

• b) Are vapor that support combustion.• c) Density of vapors that support the burning.• d) The temperature of material that will give off

ample vapors that support the burning of a material.

Page 8: REVIEW TEST Fire Technology (Pre-test)

• 7. After you are sure that the electricity has been turned off to a burning electric motor, how should the fire be fought?

• a) As a class A or B fire

• b) As a class C fire

• c) As a class D fire

• d) None of these

Page 9: REVIEW TEST Fire Technology (Pre-test)

• 8. At what level would you expect to find vapor having the density of 1.75?

• a) at all levels

• b) the lowest level

• c) the highest level

• d) ground level

Page 10: REVIEW TEST Fire Technology (Pre-test)

• 9. The magnitude of fire is governed by what factor?

• a) The surface area of fuel exposed to the air.

• b) The size of fire which is governed by its intensity.

• c) The degree of heat necessary to ignite material.

• d) All of the above.

Page 11: REVIEW TEST Fire Technology (Pre-test)

• 10. Fire propagation will be increased by what action?

• a) By means of oxidation.

• b) With the action of chemical reaction.

• c) By the transmission of heat to nearby materials.

• d) By the action of spontaneous heating.

Page 12: REVIEW TEST Fire Technology (Pre-test)

• 11. What factor makes water such an excellent fire-fighting agent?

• a) cooling effect

• b) heat absorption

• c) dilution

• d) smothering

Page 13: REVIEW TEST Fire Technology (Pre-test)

• 12. Why is carbon dioxide so effective for use on class C fires?

• a) knock-down effect

• b) non-conductivity

• c) cooling effect

• d) dilution

Page 14: REVIEW TEST Fire Technology (Pre-test)

• 13. What agent should be used in fighting combustible metal fires?

• a) dry chemical

• b) dry powder

• c) dry “ordinary” chemical

• d) G.I powder

Page 15: REVIEW TEST Fire Technology (Pre-test)

• 14. In what manner CO2 makes it a desirable extinguishing agent?

• a) Because of its number of properties.

• b) Because of its cooling effect.

• c) Because it inhibits in the chemical reaction.

• d) Because of its conductivity.

Page 16: REVIEW TEST Fire Technology (Pre-test)

• 15. The most effective agent used in chemical chain reaction?

• a) AFFF

• b) halon

• c) dry chemical

• d) dry powder

Page 17: REVIEW TEST Fire Technology (Pre-test)

Answers:

• 1. A• 2. D• 3. A• 4. A• 5. A• 6. A• 7. A• 8. B• 9. A• 10. C• 11. B• 12. B• 13. B• 14. A • 15. B

Page 18: REVIEW TEST Fire Technology (Pre-test)

Post test

Prepared by: Dr. Miller F. Peckley, CSP, CSMS, CST

MFP Review and Training Services

Page 19: REVIEW TEST Fire Technology (Pre-test)

• 1. The year the U.S. DOD implemented the hazard classification and identification system for international use.

• a) 1967

• b) 1987

• c) 1976

• d) 1978

Page 20: REVIEW TEST Fire Technology (Pre-test)

• 2. this word may be used in place of “combustible” for highway transportation of fuel that is not classed as a “flammable liquid”

• a) Gasoline

• b) Non-flammable

• c) Fuel oil

• d) Dangerous

Page 21: REVIEW TEST Fire Technology (Pre-test)

• 3. It restricts the spread of the fire to the point of origin or at least to the area involved.

• a) extinguishment

• b) confinement

• c) suppression

• d) control

Page 22: REVIEW TEST Fire Technology (Pre-test)

• 4. The responsibility to locate, confine and extinguish the fire lies in the hands of:

• a) Firefighter

• b) senior firefighter

• c) nozzle man

• d) fire captain

Page 23: REVIEW TEST Fire Technology (Pre-test)

• 5. A very useful tool used to make quick connection to damage male hose connections

• a) Siamese connector

• b) Universal thread adapter

• c) Wye connector

• d) Hydrant wrench

Page 24: REVIEW TEST Fire Technology (Pre-test)

• 6. The lowest section of an extension ladder?

• a) heel

• b) bed ladder

• c) butt

• d) fly ladder

Page 25: REVIEW TEST Fire Technology (Pre-test)

• 7. A rope or cable which is used to raise the fly ladder of an extension ladder?

• a) pawl

• b) halyard

• c) guides

• d) stop

Page 26: REVIEW TEST Fire Technology (Pre-test)

• 8. A straight ladder with hooks in a movable socket is called:

• a) top or tip ladder

• b) roof ladder

• c) hook ladder

• d) attic ladder

Page 27: REVIEW TEST Fire Technology (Pre-test)

• 9. How many men are required to carry extension ladder from 24 to 36 feet length?

• a) three persons

• b) minimum of two person

• c) four person

• d) six person

Page 28: REVIEW TEST Fire Technology (Pre-test)

• 10. On a two-man raise, what does the man on the top of the ladder do after the ladder is placed close to the building?

• a) raise the ladder up to the building.• b) “walk” the ladder up to the building by

using the rugs.• c) turn the extension ladder before placing

it to the building.• d) divide the ladder to its desired height.

Page 29: REVIEW TEST Fire Technology (Pre-test)

• 11. Type of ladder that allows the user to climb up and down, one storey at a time?

• a) attic ladder

• b) extension ladder

• c) wall ladder

• d) pompier

Page 30: REVIEW TEST Fire Technology (Pre-test)

• 12. Type of ladder capable of extending up to 100 feet.

• a) Hydraulic aerial ladder

• b) aerial ladder

• c) elevating platform

• d) 4 section extension ladder

Page 31: REVIEW TEST Fire Technology (Pre-test)

• 13. One of the strategies used in post-extinguishment procedures that prevent excessive damage by fire, smoke and water?

• a) overhaul

• b) salvage

• c) exposure

• d) blanketing

Page 32: REVIEW TEST Fire Technology (Pre-test)

• 14. Factor that can do more damage to the building/ facility during firefighting operation?

• a) fire

• b) water

• c) smoke

• d) heat

Page 33: REVIEW TEST Fire Technology (Pre-test)

• 15. Methods used to prevent excessive damage from water?

• a) sawdust

• b) salvage cover

• c) sand

• d) none of the above

Page 34: REVIEW TEST Fire Technology (Pre-test)

• 16. A method or quick way to spread the small salvage cover in protecting materials.

• a) accordion method

• b) “one-man throw”

• c) the “counter payoff”

• d) none of these

Page 35: REVIEW TEST Fire Technology (Pre-test)

17. The complete and detailed check of the structures and material after the fire?

• a) ventilation

• b) investigation

• c) inspecting

• d) overhaul

Page 36: REVIEW TEST Fire Technology (Pre-test)

• 18. The most important and excellent supporting evidence in arson?

• a) drawing and sketching

• b) photography

• c) investigator’s note

• d) all o these

Page 37: REVIEW TEST Fire Technology (Pre-test)

• 19. The uncontrollable impulse to burn anything without any motivation?

• a) revenge

• b) pyromania

• c) pyromaniac

• d) hatred

Page 38: REVIEW TEST Fire Technology (Pre-test)

• 20. It is considered the fire prevention month in the Philippines?

• a) summer

• b) April

• c) March

• d) May

Page 39: REVIEW TEST Fire Technology (Pre-test)

Answers:

• 1.C 11.C• 2.C 12.C• 3.B 13.B• 4.B 14.B• 5.B 15.B• 6.B 16.B• 7.B 17.D• 8.B 18.B• 9.B 19.B10. B 20.C