NICOLE L. FRANKLIN2549 Jason Loop ● Richland, WA 99352 ● 509-420-6491 ● N.Franklin1329@gmail.com

Professional ExperienceBECHTEL NATIONAL INC. Richland, WashingtonElectrical Field Engineer 06/2014-Current

Interpret design-engineering drawings and prepare construction working drawings. Design, implement, maintain, and improve electrical equipment, components, and systems. Inspect completed installations and observe operations, to ensure conformance to design,

specifications, conformance to operational and safety standards. Responsible for punch list items and insuring the completion of outstanding items. Coordinate with the Department of Energy to ensure adequate compliance with contractual obligations.

TUCSON ELECTRIC POWER Tucson, ArizonaElectrical Drafter 01/2013 – 6/2014

Responsible for electrical drawings including: new construction, as-builts, field corrections, and standards on transmission systems 46kV to 750kV.

Prepare presentations to show conceptual design of new substation equipment. Field verifications of the drawings, wiring relays, and assisting with protection selection.

BECHTEL NATIONAL INC. Richland, WashingtonAssistant Field Engineer 04/2008-01/2013

Produced temporary power field sketches, substation single lines, and block diagrams in MicroStations for distribution systems ranging from 120V to 13.8kV.

Performed Short-Circuit Analysis studies using ETAP to determine arc-flash hazards, appropriate protection boundaries, PPE, and necessary equipment.

Construction Work Package development for maintenance, troubleshooting, temporaryinstallations, and temporary modifications to temporary and permanent plant equipment.

Assisted in multiple planned substation outages. Updated and maintained the panel schedules for temporary power. Managed the cable management system to ensure that bulk cable pulling was organized and

supported. Responsible for supporting the field engineering organization by maintaining inspection documentation

and maintaining the installation status of components within project databases. Planning and managing manual takeoffs. Uploading takeoffs into project databases and coordinating

with scheduling and EVMS in order to maintain realistic and achievable timelines. Performed safety walk downs and developed hazard analysis. Reviewed and interpreted working drawings to determine if information is adequate for successful

completion of construction.

QualificationsExtensive knowledge of AutoCAD 2D & 3D, MicroStations V8 & XM, Visio, Project Wise, CMMS, Bentley Navigator, Setroute, Team Works, BPS, CDR/NCR/FC’s, EVMS, work control conversion procedure and implementation, Info Works, NFPA70E, ETAP, NEC

Certifications

Short Circuit, Device Evaluation, Coordination & Arc Flash – IEEE July 2012ETAP Short Circuit, Device Evaluation, Coordination and Arc Flash – ETap July 2012NEC 2011 – Bechtel August 2012

InterestsInternational assignments, community involvement, mentoring, tennis, and coaching youth baseball.