ANIK MONDAL Mobile No: +919903674453 E-mail: rahul_joy29@yahoo.co.in, rahuljoy29@gmail.com

SYNOPSIS:

I am a B.E (in Mechanical Engineering) graduate, having 9 years working experience mostly as Piping Design Engineer in Power-Plant, Chemical, Construction and Oil & Gas Industry and also have additional Experience in various handling Equipment of Blast Furnace & coal handling plant Project, and currently looking for an opening preferably in a vast engineering industry of Oil and Gas.Also, have excellent communication and relationship management skill. Got additional skill enhancement training on certified course on Piping Stress Analysis of Stress Critical Lines using Caesar-II 5.2, ANSYS Workbench 14.5, CADWorxs, PRO E & STADD Pro also INTERGRAPH Smart plant design tools – like in PDS & SP3D & PDMS, also Micro-station.

TECHNICAL SKILLS & KEY RESPONSIBILITIES

PIPING STRESS ANALYSIS OF STRESS CRITICAL LINES USING CAESAR-II 5.2 and Visual Analysis & Supporting of Non Critical lines with respect to ASME Codes

Effective communications with clients, Vendors & Inter departments for various project related activities.

Conversant with various international codes and standards like ASME, APL, ASTM and ANSI etc

Stress analysis done for following systemso Analysis of piping systems connected to Pumps, Compressors, Heat Exchangers, Reactors,

Air fin coolers, columns, Heaters, Coke drums, Tanks, Pressure vessels, Ejectors, Plate exchangers, Aluminum brazed plate exchangers, PSV’s etc.

o Piping systems in pipe racks, off sites. o Stress Analysis of above Ground / Underground Pipeline Systems. o Establishing Static Load Cases for analysis. Wind / Seismic / PSV Reaction Load analysis

using static equivalent. Knowledge of common types of equipment’s, their functions & the criteria to be considered during

analysis. Prepared MTO, LDT, valve data sheet, scope of work, pipe line routing, various piping calculation

used for process piping and pipe lines. Installation of piping systems, tanks and steel structures by using plan, isometric drawings and

P&ID. Supervise all mechanical/piping construction activities to ensure all the works are carried out as

per project specification and schedule Review and approval of various pressure vessels, heat exchangers, boilers, valves, process piping

and other petrochemical processing and industrial equipment. Piping and Pressure vessel certification according to local jurisdiction and international standard

requirements Preparation/Review of Design Calculations such as Pipe Wall Thickness, flange selection & leakage. Responsible for the preparation of all piping deliverables and implementation of organization

quality standards and project specific quality standards as well to ensure highest quality Hands on Experience in PDMS Preparation/Review of Piping GA drawings, Layouts, Piping Isometrics & Civil outlines drawings. Pipe wall thickness calculation, pipe span calculation, piping flexibility. Equipment layout and Pipe Support layout drawing

1 | P a g e

RESUME ANIK MONDAL

Checking and qualifying Piping Loads on Equipment’s Nozzles, in Compliance with API and Allowable from Vendors.

Pipe Support Analysis Civil/Structural communication for providing structural requirement / piping loading information. Vendor Evaluation and preparation of technical specification for Tanks, Columns, pressure Vessels

etc. & Conveying to Vendor. Familiar with Plot plans, Key plans, Piping and Equipment layout.

PROFESSIONAL SKILL SET (SOFTWARE EXPOSER)

CAESAR II Version 5.0 for Pipe Stress Analysis Advanced Course and PDMS. Intergraph’s Plant Design (PDS) 8.0 suite covering piping models. Got Advanced Training skill on PRO E, STADD PRO, ANSYS Workbench 14.5 (Design

Modeler & CFD). Basic Experience in CADWorxs

Isogen Creation, Model Space/BOM Set up3D Routing/ Dimensioning and annotatingPiping and ComponentsProject Spec/SizingAdding Lines/Valves/Flanges, Instruments Types and AdditionEquipment Creations, Equipment modifications, Using CoordinatesPipe Placements, Drawing manager, Process Flow diagram

Got Advanced SP3D training with spec customization detailing, have basic knowledge in Auto CAD too.

Window XP, MS-Office, Multimedia and Internet

EMPLOYMENT RECORD:

Sl. No. Name of Employer Duration Designation1 Larsen & Toubro Ltd.

ECC Division, EDRC- Kolkata.Since Feb, 2009 to August 2016.

Assistant Engineering Manager (Mechanical)

Nature of Work Leading and working with PDMS, PDS and CAESAR II Design Teams Responsible for the preparation of all piping deliverables and implementation of organization quality

standards and project specific quality standards as well to ensure highest quality Preparation/Review of Design Calculations such as Pipe Wall Thickness, Nozzle Thickness, flange

leakage. Design & detailing for material and equipment handling both Rotating and Static equipment Designing and fabrication of Process ducting Evaluation for Process Valves and understanding its process requirements Design Analysis with ANSYS Workbench 14.5.CAD Help with ProE Piping Stress Analysis

2 Rolta India Ltd. Mumbai August, 2007 to Jan, 2009. Executive Engineer (Design)

Nature of Work Structural and Piping designing and modeling work with smart plant design tools Plant layout design work with modeling detailing work Piping Stress Analysis Review of material handling equipment Drawing checking & review work

WORKING EXPERIENCE:

2 | P a g e

RESUME ANIK MONDAL

1. Working as an Asst. Engineering Manager (Mechanical) at Larsen & Toubro Ltd. (ECC, EDRC) , in Kolkata since Feb, 2009.

Job responsibility:

Designing of Structural column & bracing with the help of STADD Pro designing Software.

Preparation of Equipment GA drawing with help of Pro E Modeling software.

Stress analysis and support design of critical piping connecting to pump, compressor, vessels, plate heat exchanger

Visual checking and supporting of non-critical lines

Analysis of Compressor piping

Modeling of Equipment’s, Structures and Design of Piping Routing with P&ID & as per Given Isometrics

Designing of Secondary Structures like Piping Supports Stress Analysis and support design of critical piping connecting to Compressors,

Vessels, Plate Heat Exchangers and Air Coolers Presentation of 3D model to Client during model reviews by conducting at various

stages of project like 30%, 60% and 90%. Generation of Isometrics for all the Pipes Review of Piping and Plant layout design activities including Plot Plan, Piping Plan Generation of Bill of Materials Development of piping classes and assist in uploading them in to PDMS/PDS database Development of various design calculation related to various mechanical Rotating &

Static equipment

Experienced in proposal engineering and tendering, and making BOQ, cost estimation part with other engineering work.

Developed various design calculation related to Various mechanical Rotating & Static equipment

Designing of Process Ducting with the Help of ANSYS and estimation and evaluation of result for the Suitability

Prepared Equipment GA drawing 3D Modeling of Cranes & other Rotating Equipment’s with the help of PRO E Modeling

Detail Evaluation for Process Valves and its associated Equipment’s Hands on experience with ANSYS 14.5 Workbench on Vibration-al Analysis, CFD, and

other various structural Analysis.Major Projects Handled as Piping Design Engineer based on above responsibility are

I. Project 1 - Carboxylate Project, Client – Chevron Oronite Private Ltd.II. Project 2 – Aegean Refinery Project, Client – TSGI

III. Project 3 – OAK Grove Gas Plant, West Virginia, Client – Williams3 | P a g e

RESUME ANIK MONDAL

IV. Project 4 – Wate gas Treatment plant, Client – Chevron Oronite Private Ltd.

2. Worked as an Executive Engineer (Design) at Rolta India Ltd , in Mumbai since August, 2007 to January, 2009 .

Job responsibility

Worked as equipment and structural and piping designer modeler using PDS & SPR (Smart Plant Review).

Site verification of different piping structure like BXP Rack and different grade level piping and GAD generation of those piping structure in AUTO CAD.

Worked in DPS Support Modeling for Quality checking and comparing with PDMS, PDS ISO and Stress ISO with the help of SMART PLANT REVIEW (SPR).

Preparation & checking General Arrangement Drawings and plant layout with the help of PDMS, PDS and Sp3D

Review of the Model through Navis-Works Review of Piping and Plant layout design activities including Plot Plan, Piping Plan Development of piping classes and assist in uploading them in to PDMS/PDS database Preparing line lists & valve lists based on process and instrumentation diagrams.

Preparation of piping layout, isometrics, detail drawings

Extraction of Isometrics and creation of MTO for Piping and Pipe Supports

Checking of the Isometrics as per clients Standards

Stress analysis and support design of critical piping connecting to pump, tank, vessel, exchangers

Vendor drawing review / commenting for stress analysis aspects.

Review and supporting of non-critical lines.

PDMS Administration.

Layout drawings using Micro-stationMajor Projects Handled as Piping Design Engineer based on above responsibility are

I. Project 1 – Honda Motorcycle Plant, Client - ShimiziuII. Project 2 – IOCL Barauni, Client – IOCL

III. Project 3 – Durgapur Project Limited, Client - DurgapurIV. Project 4 – ESSAR OIL REFINERY EXPANSION PROJECT, Client – DurgapurV. Project 5 – Litwin Piping Plant, Client – Litwin

AREA OF INTEREST

Piping Engineering designing of layout with SP3D, PDMS and PDS Modeling of various rotating and Static equipment’s with PRO E modeling

software

4 | P a g e

RESUME ANIK MONDAL

PIPE Stress Analysis using CEASER II Piping design Engineering Structural and Flow Analysis using ANSYS Workbench 14.5 and Above

INDUSTRIAL TRAININGTitle Vocational TrainingDuration 2 Weeks (16 Feb’05 – 03 Mar’05)Name of Organization Electro Steel Casting Limited, Khardah Road,24 Parganas, West BengalProject Description Practical Training and observational study on Captive Power Plant.

EDUCATION:

Name of University / Board Degree / Diploma Year of Passing

Siddaganga Institute of Technology under University (V.T.U.), Karnataka, India. B.E (Mechanical Engineering) 2007

Haryana Vidya Mandir under CBSE Higher Secondary 2002

Apeejay School under CBSE Secondary 2000

PERSONAL DETAILS

Date of Birth 29th November 1982Father’s name Mr. KAMAL RANJAN MONDALPresent Address 78/D BINOBA BHAVE ROAD, NEAR SANGHATANI CLUB & DAV SCHOOL,

SOUTH 24 PARGANAS, KOLKATA 700038Marital Status MarriedContact Numbers +919903674453 (Mob) +913323969313 (Res)

DECLARATION:

I consider myself familiar with Mechanical Engineering aspects. I am also confident of my ability to work in a team. I hereby declare that the information furnished above is true to the best of my knowledge.

Date: May. 1, 23 Anik Mondal.Place: Kolkata. (Signature)

5 | P a g e