resolving the rapid water absorption of porous
TRANSCRIPT
This is an electronic reprint of the original article.This reprint may differ from the original in pagination and typographic detail.
Powered by TCPDF (www.tcpdf.org)
This material is protected by copyright and other intellectual property rights, and duplication or sale of all or part of any of the repository collections is not permitted, except that material may be duplicated by you for your research use or educational purposes in electronic or print form. You must obtain permission for any other use. Electronic or print copies may not be offered, whether for sale or otherwise to anyone who is not an authorised user.
Markl, Daniel; Wang, Parry; Ridgway, Cathy; Karttunen, Anssi Pekka; Bawuah, Prince;Ketolainen, Jarkko; Gane, Patrick; Peiponen, Kai Erik; Zeitler, J. AxelResolving the rapid water absorption of porous functionalised calcium carbonate powdercompacts by terahertz pulsed imaging
Published in:Chemical Engineering Research and Design
DOI:10.1016/j.cherd.2017.12.048
Published: 01/04/2018
Document VersionPublisher's PDF, also known as Version of record
Published under the following license:CC BY
Please cite the original version:Markl, D., Wang, P., Ridgway, C., Karttunen, A. P., Bawuah, P., Ketolainen, J., Gane, P., Peiponen, K. E., &Zeitler, J. A. (2018). Resolving the rapid water absorption of porous functionalised calcium carbonate powdercompacts by terahertz pulsed imaging. Chemical Engineering Research and Design, 1082-1090.https://doi.org/10.1016/j.cherd.2017.12.048
Resofuncby te
DanielPrinceJ. Axela DepartmCambridgb Omya Inc School od Institutee School o00076 Aa
a r t i
Article his
Received
Received
Novembe
Accepted
Available
Keywords:
Porous m
Pharmace
Functiona
Terahertz
Liquid im
Modelling
∗ CorresE-mai
https://do0263-8762under the
Chemical Engineering Research and Design 1 3 2 ( 2 0 1 8 ) 1082–1090
Contents lists available at ScienceDirect
Chemical Engineering Research and Design
journa l h om epage: www.elsev ier .com/ locate /cherd
lving the rapid water absorption of poroustionalised calcium carbonate powder compactsrahertz pulsed imaging
Markla,∗, Parry Wanga, Cathy Ridgwayb, Anssi-Pekka Karttunenc, Bawuahc, Jarkko Ketolainenc, Patrick Ganeb,e, Kai-Erik Peiponend,
Zeitlera
ent of Chemical Engineering and Biotechnology, University of Cambridge, Philippa Fawcett Drive, CB3 0ASe, UKternational AG, 4665 Oftringen, Switzerland
f Pharmacy, Promis Centre, University of Eastern Finland, P.O. Box 1617, 70211 Kuopio, Finland of Photonics, University of Eastern Finland, P.O. Box 111, 80101 Joensuu, Finlandf Chemical Engineering, Department of Bioproducts and Biosystems, Aalto University, P.O. Box 11000,lto, Finland
c l e i n f o
tory:
3 August 2017
in revised form 30
r 2017
28 December 2017
online 5 January 2018
edia
utical tablets
lised calcium carbonate
pulsed imaging
bibition
a b s t r a c t
Cost effectiveness, ease of use and patient compliance make pharmaceutical tablets the
most popular and widespread form to administer a drug to a patient. Tablets typically con-
sist of an active pharmaceutical ingredient and a selection from various excipients. A novel
highly porous excipient, functionalised calcium carbonate (FCC), was designed to facilitate
rapid liquid uptake leading to disintegration times of FCC based tablets in the matter of sec-
onds. Five sets of FCC tablets with a target porosity of 45–65% in 5% steps were prepared and
characterised using terahertz pulsed imaging (TPI). The high acquisition rate (15 Hz) of TPI
enabled the analysis of the rapid liquid imbibition of water into these powder compacts. The
penetration depth determined from the TPI measurements as a function of time was ana-
lysed by the power law and modelled for both the inertial (initial phase) and Lucas-Washburn
(LW, longer time Laplace- Poiseuillian) regimes. The analysis of the hydraulic radius esti-
mated by fitting the liquid imbibition data to the LW equation demonstrates the impact
of the porosity as well as the tortuosity of the pore channels on the liquid uptake perfor-
mance. The tortuosity was related to the porosity by a geometrical model, which shows that
the powder compact is constructed by aggregated particles with low permeability and its
principal axis perpendicular to the compaction direction. The consideration of the tortuos-
ity yielded a very high correlation (R2 = 0.96) between the porosity and the hydraulic pore
radius. The terahertz data also resolved fluctuations (0.9–1.3 Hz) of the liquid movement
which become more pronounced and higher in frequency with increasing porosity, which
is attributed to the constrictivity of pore channels. This study highlights the strong impact
of a tablet’s microstructure on its liquid penetration kinetics and thus on its disintegration
behaviour.
© 2018 The Authors. Published by Elsevier B.V. on behalf of Institution of ChemicalEngineers. This is an open access article under the CC BY license (http://creativecommons.
org/licenses/by/4.0/).
ponding author.l address: [email protected] (D. Markl).i.org/10.1016/j.cherd.2017.12.048/© 2018 The Authors. Published by Elsevier B.V. on behalf of Institutio
CC BY license (http://creativecommons.org/licenses/by/4.0/).
n of Chemical Engineers. This is an open access articleChemical Engineering Research and Design 1 3 2 ( 2 0 1 8 ) 1082–1090 1083
1. I
Pharmacmost coningredientured viaa selectiopropertieing and dmost castity in a
play a crin respecIncreasindelivery rents, for
access inoral disin
In patablets (Oexcipientare desigseconds,and convfer from
for theseimprovemtrates thshould bmance othe tableticles aninto smacles. Thepartly dupartly duThe convcedures dassess thquantitatdisintegrcontrol th
Liquidhave beeKleinebuSeveral sinto powcamera (2012), graet al., 198Esteban
(Tritt-Goc2014). Anceutical
(Wildensrior compas they arials in athe draw(�1 min)imbibitioseconds.penetratiet al. (20
le 1 – List of the five batches characterised in thisdy. The presented data slightly differ from the data inrkl et al. (2017b) as only a subset of the batch was
ed in this study. Batches B01 and B05 consisting of 5lets, and 6 tablets were measured for the batches
2-B04. The porosities were determined by THz-TDS inbination with the anisotropic Bruggeman model.
ch Diameter (mm) Thickness, L (mm) Mass (mg) Porosity, f (%)
10.04 1.67 216 ± 2 46.2 ± 0.3 10.03 1.64 190 ± 2 51.8 ± 0.5 10.02 1.63 168 ± 2 56.6 ± 0.3 10.03 1.62 146 ± 4 62.0 ± 0.4 10
bitio) ba
hasiormaabletsmisistinz timtive
onst as fo
highd calsity
ly se inteb). Tpactomp
thicturemonfurthts. Tasisertie., 201
M
M
batcrgetts (T
keping tts wsimenon-
the
s the from
gen of mthen
areae fuation of highly-porous particles using a surface modifi-
ntroduction
eutical tablets are well-known as being amongst thevenient ways of delivering active pharmaceuticalt (API) to the patient. Tablets are typically manufac-
powder compaction and consist of API particles andn of various excipients. The physical and chemicals of both API and excipient particles dominate tablet-elivery functionality of the dosage form. However, ines the excipients represent by far the greater quan-tablet and, therefore, it is not surprising that theyucial role in defining the ease of tableting generallyt to material flow, compressibility and compaction.gly, the design of targeted drug release and vectorequires specialist development of functional excipi-
example, to encapsulate an API to provide protectiveto the small and large intestine or to provide rapidtegration.rticular, the performance of orally disintegratingDTs) is strongly impacted by the pore structure of thes and the overall microstructure of the tablet. ODTsned to disintegrate rapidly, usually in the matter of
in the mouth which facilitates easy administrationenience. About 35% of the general population suf-difficulties in swallowing (Sastry et al., 2000), and
patients in particular ODTs provide a significantent in therapy. Once in the mouth, saliva pene-
e dosage form and even a small amount of 1–2 mLe sufficient to achieve disintegration. The perfor-
f an ODT is limited by the rate saliva penetrates intot leading to swelling of the (superdisintegrant) par-d eventually causing the break-up of the compactll agglomerates or the original constituents’ parti-
understanding of this process is severely limited,e to the complex nature of the process itself ande to the lack of suitable measurement techniques.entional disintegration apparatus and testing pro-escribed by the pharmacopoeia are not suitable to
e performance of such rapidly disintegrating tabletsively. Hence, alternative methods to measure rapidation are highly desirable to evaluate ODTs and toe quality of such drug products.
uptake of and penetration into powder compactsn studied by a range of approaches (Quodbach anddde, 2016; Desai et al., 2016; Markl and Zeitler, 2017).tudies were performed to measure the water uptakeder beds and into powder compacts using an opticalHapgood et al., 2002; Nguyen et al., 2009; Desai et al.,vimetric techniques (Nogami et al., 1966; Caramella6; Catellani et al., 1989; Peppas and Colombo, 1989;
et al., 2017) or magnetic resonance imaging (MRI) and Kowalczuk, 2002; Nott, 2010; Quodbach et al.,other technology to resolve the structure of pharma-tablets is X-ray computed microtomography (X�CT)child and Sheppard, 2013). MRI and X�CT are supe-ared to an optical camera or gravimetric techniques
llow to resolve the internal structure of porous mate- non-destructive and contactless manner. However,back of both methods is their long measurement time, which renders them unsuitable to study the liquidn into highly-porous media that fully hydrate within
A very promising tool to analyse such rapid liquidon kinetics is terahertz pulsed imaging (TPI). Yassin
TabstuMaustabB0com
Bat
B01B02B03B04B05
imbi(MCCempperfcal ttranconsherteffecdemwell
Aaliseporocretelarge2017comthe c
Instrusitu
was
tablethe bpropet al
2.
2.1.
Fiveto tamenwerevarytableporoare
afteritatethat
Infaceand
faceto thform
15) coupled a TPI with a flow cell to study liquid cation to
.00 1.61 125 ± 2 67.3 ± 0.4
n and swelling of various microcrystalline cellulosesed immediate-release formulations. These studiessed the impact of the porosity on the disintegrationnce of such tablets. The porosity of pharmaceuti-s can be measured using terahertz technology in asion setting. Bawuah et al. (2016) measured tabletsg of pure MCC and combined with an API by tera-e-domain spectroscopy (THz-TDS) to determine therefractive index and, thereby, the porosity. It was alsorated that this method works for biconvex tablets asr complex formulations (Markl et al., 2017a).ly viable excipient for ODT formulations is function-cium carbonate (FCC), which has a high intra-particle(Stirnimann et al., 2013). FCC based tablets have a dis-parable bimodal pore size distribution, consisting ofr-particle and fine intra-particle pores (Markl et al.,
he inter-particle pores are formed during the powderion and therefore, they can be modified by adjustingaction process.
s study we investigated the interaction of the pore of FCC tablets with liquid during imbibition. The in-itoring approach by means of terahertz technologyer developed to study the rapid imbibition of the FCChe imbibition process was analysed and modelled on
of the TPI data and it was related to the pore structures of the same tablets determined by THz-TDS (Markl7b).
aterials and methods
aterials
hes of pure flat-faced FCC tablets were compacted porosities ranging from 45% to 65% with 5% incre-able 1). The diameter and thickness of the tabletst constant at 10 mm and 1.5 mm, respectively, by
he material weight. The pore structure of these FCCas characterised by Markl et al. (2017b) using mercurytry, X�CT and THz-TDS. Since X�CT and THz-TDS
destructive techniques, the tablets were still intactmeasurement and were used in this study. This facil-
direct correlation of the results from this study with Markl et al. (2017b).eral, FCC is formed in a process whereby the sur-
icrometre sized calcium carbonate particles is etched re-precipitated to create a highly porous, high sur-
material. The naming of the FCC material refersnctionalisation of calcium carbonate as being the
form hydroxyapatite. A typical FCC entering use as
1084 Chemical Engineering Research and Design 1 3 2 ( 2 0 1 8 ) 1082–1090
Fig. 1 – Experimental setup of the TPI coupled with a flowcell. (a) Schematic representation of the flow loop. (b) 3Dvisualisation of the terahertz reflection probe and the flowcell. The flow cell has a size of 10 cm × 5 cm × 5 cm. Moredetails about the flow cell are provided by Yassin et al.(2015).
excipienta calciumplate-likenent coninterior o
2.2. T
A commLtd, Camthe hydrhertz meequippedwas set tdelay of 3
The flet al. (20measuretablet siton only oto the liqtrolled bywas sealcomplete
The ean open
with wattank as wwas pum
pump (53equippedLtd, Falmto providations. Tpreventehydrationat outletThe outlrelease thwetting o
The doutlet B
tablet asFig. 2. Threfractivetracking
material)facilitateof waterdetectedPrior to trforms wepeaks ortablet/airterahertzterahertzas well ation measample.
terahertzwaveformkind of in
mmpproied i
1HF
re HFuencectiv
R
L
kineactede thelar btion
primh w
behporeork
n beests
truct dist
(Omyapharm®
, Omya International AG) consists of carbonate/hydroxyapatite structure, in which the
nano-thickness lamellae of the phosphate compo-struct a network of fine pores on the surface andf the FCC particle.
erahertz pulsed imaging
ercial terahertz system (TeraPulse 4000, TeraViewbridge, UK) was coupled with a flow cell to monitoration process of pharmaceutical tablets. The tera-asurements were performed with a reflection probe
with an 18 mm focal length lens. The acquisition rateo 15 Hz and every measurement covered an optical8.8 ps.
ow cell previously developed and utilised by Yassin15) was optimised to enhance the accuracy of thements at the beginning of the hydration process. Thes in a sample holder where it is exposed to the liquidne face (Fig. 1). The surface area of the tablet exposeduid was Awet = 48.4 mm2. The flow in the cell was con-
valves at the inlet and the two outlets. The flow celled with a polyethylene window (PE), which is almostly transparent to terahertz radiation.
xperiment was started with an open inlet valve andvalve at outlet A. The experiments were carried outer at 22.5 ◦C, which was the temperature in the water
is coan aappl
fDG =
whefreqresp
3.
3.1.
The
impSincsimivariaare
whictionthe
netwlatiosuggof ssize
ell as at the outlet valve of the flow cell. The waterped at a flow rate of 13 mL/min using a peristaltic
descriptotinuously
0SN, Watson-Marlow Ltd, Falmouth, UK), which was with a low-pulse pump head (505L, Watson-Marlowouth, UK). This pump head was specifically designede a smooth flow and to minimise pressure fluctu-he presence of an air bubble at the top of the celld water from touching the tablet and therefore, the
process of a tablet was started by opening the valve B and simultaneously closing the valve at outlet A.et B is located at the very top of the cell in order to
e air in the cell completely and to assure continuousf the tablet.ata acquisition was started at the same time whenwas opened. The water then slowly approached the
it can be observed in the terahertz waveforms ine water penetrating the powder compact changes the
index of the wetted material and thus enables theof the penetration front (transient from wetted to dry
by means of terahertz reflection technology. TPI thuss the assessment of the one-dimensional transport
into the tablet. The water front was automatically by a custom-built code using Matlab (MathWorks).acking the liquid front, the measured terahertz wave-re deconvolved to reduce the noise and enhance the
iginating from the interfaces, i.e. air/dry tablet, dry, and dry tablet/wet tablet). In general, the measured
signal is a convolution of the input signal from the emitter and the impulse response of the samples additive noise. The objective of a terahertz reflec-surement is to obtain the impulse response of the
This can be achieved by deconvolving the measured waveform and a reference measurement (a terahertz
of a mirror). However, it is well-known that thisverse filtering amplifies high frequency noise, which
only suppressed by coupling the deconvolution andpriate band-pass filter. A double Gaussian filter wasn this study:
exp
(− t2
HF2
)− 1
LFexp
(− t2
LF2
)(1)
and LF define the pulse width in respect to the highy and low frequency bounds of the band-pass filter,ely.
esults and discussion
iquid imbibition
tics of the liquid imbibition process is strongly by the pore structure in the powder compact (Fig. 3).
intra-particle pore structure of the FCC particles isetween the different batches (Markl et al., 2017b), thes in liquid uptake kinetics of the different batchesarily affected by the inter-particle pore architectureas formed during powder compaction. The absorp-aviour depends on the pore size distribution and
connectivity amongst other factors such as poregeometry and surface energy. The observed corre-tween porosity and liquid imbibition kinetics thus
that each powder compact is an homologous seriesures, in that the features of connectivity and poreribution remain related to porosity, i.e. the basic
rs of the pore structure remain constant or vary con-in line with the varied tablet compression.
Chemical Engineering Research and Design 1 3 2 ( 2 0 1 8 ) 1082–1090 1085
Fig. 2 – Schematic of the setup and deconvolved terahertz waveforms (each waveform is offset by 0.004 a.u.) showing thehydration of a tablet from batch B03.
Fig. 3 – Deconvolved terahertz waveforms of one tablet per batch (each waveform is offset by 0.004 a.u.). (a) B01, (b) B02, (c)B04 and
As taba decreashydratedreflectionindices bamplitud(Verdet c
rdw = nw
nw
where nd
wetted mreflectionmedium
tant for mMarkl et aabsorptioof any feabsence
though th
izuonate po
ll.q. (2)or poes o
terah). Hoact w
(Picke effarklporox of
t. Sinindelitud
(d) B05. B03 is shown in Fig. 2.
let porosity increases from batch B01 to B05, there ise in the total duration for the tablet to become fully. The magnitude of the amplitude of the water front
is governed by the relative difference in refractiveetween the dry and wetted material. The measurede is directly proportional to the reflection coefficientonvention (Holm, 1991)), which is defined as
− nd
+ nd(2)
and nw are the refractive indices of the dry andaterial in the tablet, respectively. In general, the
coefficient and the refractive index of a porousare complex numbers. This is particularly impor-aterials which strongly absorb terahertz radiation.
l. (2017b) presented the effective refractive index andn coefficient at terahertz frequencies. The absenceatures in the absorption coefficient indicated the
tal (Mcarbin thsma
Etive
indicthe
(n = 1cont≈2.4to thin Mlow
indefrontive
amp
of phonon vibrations. They also discussed that evene calcium carbonate is birefringent as a single crys-
from bat(Fig. 3a).
no et al., 2009), the random orientation of the calciume domains in an FCC particle and of the FCC particlewder compact renders birefringence immeasurably
reveals that the reflected pulse can be either nega-sitive depending on the relative change in refractivef the two media. The initial reflection is negative asertz beam traverses from the dry FCC tablet to airwever, the sign changes when the tablet comes inith water. The refractive index of water at 1 THz iswell et al., 2004) and that of the dry material is equal
ective refractive index, neff, of the FCC tablets as given et al. (2017b). neff ranges from 1.61 to 2.19 (high tosity) and therefore it is smaller than the refractivewater causing a positive reflection peak at the waterce the relative difference between neff and the refrac-x of water decreases with decreasing porosity, thee of the reflection peak significantly drops for tabletsch B05 (Fig. 3d) compared to those from batch B01
1086 Chemical Engineering Research and Design 1 3 2 ( 2 0 1 8 ) 1082–1090
Fig. 4 – Penetration length (distance travelled by the liquidfront) as a function of time. The average porosity of thetablets from the batches B01-B05 was 46.2%, 51.8%, 56.6%,62.0% and 67.3%, respectively. Only every 10th data point isdisplayed and the shaded area corresponds to the standarddeviation within each batch.
Since
water, pucould alsback facement anand micrThe resupowder wof pharmet al., 202014). Ththe porotion reflewithin ea
FCC inet al., 20builds updisintegrdisintegrtion basewith excvia severswelling
can be reuid uptaktablet. Mgration inand this clations wfacilitateand swelcompone
The raby the LuLaplace athe poresy, as a fuflow as
y(t) =√
Table 2 – Summary of the parameters fitted to thepenetration data. The changeover, yc, is the penetrationlength at which the kinetics change from inertial (y < yc)to Laplace-Poiseuillian (y ≥ yc) flow regimes. This tablelists only the average and standard deviation of thefitting parameters of the power law (y = ktm) and the LWequation (Eq. (3)). The values for each fit are provided inFigs. 6 and 7.
Batch yc (�m) k (mm s−m) m Rh,eq (nm)
B01 109 0.16 ± 0.01 0.51± 0.02 1.16 ± 0.05B02 104 0.20 ± 0.02 0.50± 0.02 1.50 ± 0.11B03 145 0.22 ± 0.01 0.50± 0.02 1.95 ± 0.09B04 163 0.24 ± 0.02 0.52± 0.03 2.61 ± 0.21B05
where �
FCC comthe dynaof water.betweenpropose
s in
tortuaveraengtaulicxpre
= R
s a fny u., 200
co (hen
e),
ium
es of regim
to cliquith ofr t-dge h
theapla
ing ttrat
{a
k
5) coand
h anr pee w
chan larg
regihe peuillian flow regime (Fig. 6). The fitted parameter k
FCC particles are non-swelling and non-dissolving inre FCC powder compacts do not disintegrate. This
o be observed in the terahertz measurements as the of the tablet (Fig. 3) did not move during the experi-
d the powder compacts did not change their shapeostructure after drying the hydrated tablets again.lts clearly demonstrate that the highly porous FCCas specifically designed to enhance the liquid uptake
aceutical tablets (Stirnimann et al., 2013, 2014; Preisig14; Wagner-Hattler et al., 2017; Eberle et al., 2015,e water penetration kinetics are strongly driven by
sity of the tablets (Fig. 4). The small standard devia-cts that the penetration kinetics are highly consistentch batch.
combination with a superdisintegrant (Stirnimann13), which primarily drives the swelling and thus
an internal stress, facilitates the design of a desiredation behaviour as each excipient imparts only oneation mechanism at a time. A design of a formula-d on a mechanistic understanding is more complexipients, such as MCC, impacting on disintegrational mechanisms, which hamper the decoupling of theand the liquid uptake. Mechanistic understandingflected by models which describe swelling and liq-e (Markl et al., 2017c) as well as the break-up of the
odelling the different processes involved in disinte-dependently would simplify the design significantlyould eventually lead to models of commercial formu-hich predict the disintegration behaviour, and this isd by considering the ability to decouple absorptionling by using FCC as the sole absorption-promotingnt.te uptake into porous systems is typically describedcas-Washburn (LW) equation, which combines thend the Hagen-Poiseuille equation and assumes that
are uniform and cylindrical. The penetration length,nction of time t can thus be expressed for a laminar
Rh,eq� cos �t
2�(3)
ablethe
the
cal lhydrbe e
Rh,eq
Rh aKozeet al
Intionregimcalcscalflowtionthe
lenglineachanfromthe Limispene
y(t) =
Eq. (d, k
batclargein linthe
withflow
TPois
correlate240 0.31 ± 0.03 0.51± 0.01 4.02 ± 0.31
is the contact angle between the water and theponent solid material in the powder compact, � ismic viscosity of water and � is the surface tension
The hydraulic radius, Rh,eq, is defined as the ratio the pore volume to the solid-fluid interfacial area. Weto account for the flow-dependent geometrical vari-the definition of the hydraulic radius by consideringosity, T = Le/L. T is a dimensionless number relatingge length of the fluid path, Le, and the geometri-
h of the sample (tablet thickness), L. The equivalent radius as a function of the tortuosity (Shin, 2017) can
ssed as (see Appendix A for derivation)
hT−1 = af
(1 − f )T−1. (4)
unction of porosity, f, was defined by Carman andnder the consideration of a shape factor, a (Nakayama7).ntrast to y ∝ √
t as described by the LW equa-ceforth referred to as the Laplace-Poiseuillian flow
it is known that the liquid uptake length in compactedcarbonate is directly proportional to t for short time-
the imbibition (henceforth referred to as the inertiale). Schoelkopf et al. (2000) used the Bosanquet equa-
onsider both inertial and viscous forces acting ond. The authors demonstrated that the liquid uptake
compacted calcium carbonate blocks changes from aependence to a
√t-dependence. We also observe this
ere in the measurements of the penetration length TPI data. The changeover, yc, from the inertial toce-Poiseuillian flow regime was determined by min-he root-mean-squared error (RMSE) of the measuredion length against a fitting model expressed as
t + d, if y < yc
tm, otherwise.(5)
nsists of a linear equation and a power law with a,m as fitting parameters. yc was determined for everyd the values in Table 2 reveal that the changeover is atnetration lengths for higher porosity batches. This isith the observations in Schoelkopf et al. (2000), wheregeover was at a larger penetration length for tubeser radii. The initial penetration rate in the inertial
me scales linearly with the porosity (Fig. 5).ower law was fitted to the data from the Laplace-
s linearly with the porosity and the exponent m indi-
Chemical Engineering Research and Design 1 3 2 ( 2 0 1 8 ) 1082–1090 1087
Fig. 5 – Initial penetration rate (a in Eq. (5)) as a function ofthe porosity. This parameter was determined from the dataof the inertial flow regime (y < yc).
Fig. 6 – Fitting parameters of the power law (Eq. (5)) as afunction of the porosity using the data from theLaplace-Poiseuillian (y ≥ y ) flow regime.
cates thaThis supequivalenequationflow regim� = 1.002 m46.7◦ (Koias the incite and
the role
structureporous mthe macrrelevant.to high c
Fig. 7 – Correlation of the equivalent hydraulic radius,Rh,h,eq, and the porosity, f. Rh,eq was estimated by fitting theLW equation (Eq. (3)) to the penetration length data fromthe terahertz measurements and it was normalised by theunit area exposed to the water, Awet.
Table 3 – Fitting parameters and correlation performanceof three different porosity-tortuosity models. Moredetails about the models are provided in the respectivereference.
Model a (nm) p R2 RMSE (nm) Ref
Eq. (6a) 3.00 1.19 0.95 0.23 Archie (1942)Eq. (6b) 4.53 3.52 0.96 0.22 Weissberg (1963),
Comiti andRenaud (1989)
Eq. (6c) 10.57 12.33 0.96 0.21 Boudreau and
structureequilibriuThis emprapid abs2006).
The ebatch (seunsurpriThe hydrfine sizeis being
resisted
describedBeside
linked totion of th
therfollowces t
f −p
1 − p
1 + 39
re p
els a 0.96nly
c
t the liquid penetration length is proportional to√
t.ports the use of the LW equation to determine thet hydraulic radius of the powder compacts. The LW
was fitted to the data in the Laplace-Poiseuilliane of every measurement using � = 72.75 N mm−1 andPa s of water and a contact angle of water-FCC of
vula et al., 2011). We used the contact angle of calciteitial advancing and receding contact angles of cal-hydroxyapatite for water are roughly similar. Givenof viscous resistance during absorption in a porous
and the geometrical variability of the surface of aedium (solid and air alternating) we consider that
oscopic contact angle made by a sessile drop is less
by othe
eren
T =
T =
T =
whemod(R2 =the o
The site constraint in an ultra fine capillary leadsapillary forces dragging the liquid through the pore
tortuositdrop to 0
Meysman (2006)
and therefore empirically we suggest the use of them contact angle trending toward the receding value.irical interpretation is supported by the extremelyorption by such fine pore networks (Ridgway et al.,
stimated Rh,eq exhibits high consistency within eache small standard deviation of Rh,eq in Table 2) and,singly, it is strongly correlated to the porosity (Fig. 7).aulic radius ranges from 1.1 nm to 4.3 nm. The very
of the hydraulic radius suggests that the wickingdriven by the finest pores at the wetting front andby the permeability of the sample at long times, as
by Ridgway et al. (2006).s the dependence of Rh,eq on the porosity, it is also
the tortuosity (Eq. (4)). The tortuosity is again a func-e porosity (Fig. 8) and various models were proposed
researchers to describe this relationship. We useding three different porosity-tortuosity models (ref-
o the models are provided in Table 3)
(6a)
ln f (6b)
2p
�(1 − f ) , (6c)
is a fitting parameter. The results for the differentre summarised in Table 3. Interestingly, the best fit) is provided by the model given in Eq. (6c), which isgeometrical model tested. If we neglect the effect of
y (T = 1), the coefficient of determination and RMSE.77 and 0.38 nm, respectively. This clearly demon-1088 Chemical Engineering Research and Design 1 3 2 ( 2 0 1 8 ) 1082–1090
Fig. 8 – Schematic representation of the pore space in thepowder compacts. Highly porous tablets (a) have shorteraverage lengths of the fluid path, Le, than tablets with alower porosity (b). The tortuosity, T, of (a) is thus smallerthan that of (b). (c) is a schematic of the tortuosity-porositymodel as expressed by Eq. (6c). ı is the displacement of thelarge ani
strates tprocess.
Eq. (6(Boudreamuds. Tnonpeneorder to mtablet. It
sarily dirsample. Tto the dition (Fig.actual poprojectinnonintera small gsize of thtortuositand it raare very
tuosity vso-called
The fimated Rh
the radiuindicatesness, whin excelle(2017b), w
Fig. 9 – Analysis of high-frequency fluctuations of theliquid penetration data. (a) Data of one tablet per batch. (b)Batch-averaged penetration depth in frequency-domain.The open
otropiculosit
in thvalu
F
highapid
th depenysedtratied
ce sangeis ti
ions
In p wit
tionassuree pllenteforend oe inlhese
sotropic pore layers.
he effect of the tortuosity on the liquid imbibition
c) was developed by Boudreau and Meysmanu and Meysman, 2006) to predict the tortuosity ofhe model is based on the idea of the assembly oftrating and nonoverlapping blocks (disks, Fig. 8c) in
imic effective aggregated particles that make up theis important to note that these blocks do not neces-ectly represent the individual particles present in thehe disks are aligned on a plane that is perpendicular
rection of compaction. Moreover, the disk distribu- 8c) is obtained by taking a cross section through thewder compact perpendicular to the tablet face andg all the intersected particles onto this plane in asecting fashion. The layers of disks are separated byap of constant width, which is large compared to thee water molecules penetrating into the compact. They decreases monotonically with increasing porositynges from 8.6 (f = 0.46) to 5.5 (f = 0.68). These valueslarge, which is attributed to the fact that these tor-alues account for the “true” tortuosity as well as the
constrictivity of the pores (Boudreau, 1996).tting of Eq. (4) combined with Eq. (6c) to the esti-
,eq yielded a value of p = 12.33, where p is defined ass to thickness ratio of the disks. The high p value
that the disks must be larger in diameter than thick-ich suggests a strongly anisotropic structure. This is
anispendtortuthatone
3.2.
The
of rleng√
t-danalpeneapplreduthe rin thtuat10 ).latedaddito aof thexcetherdepeof th
T
nt agreement with the results reported by Markl et al.hich revealed that the pore space is dominated byshape of
ing block
circles indicate the maximum for each batch.
ic inter-particle pores with their principal axes per-ar to the tablet faces. We want to emphasise that they in the radial direction is not necessarily the same ase axial direction. Our discussion is restricted to only
e of the tensor-tortuosity.
luctuations of moving liquid front
acquisition rate (15 Hz) facilitates the analysismovements of the water front. The penetration
ata feature fluctuation superimposing the t- anddent behaviour (Fig. 9a). These fluctuations were
on the basis of the frequency-domain data of theion depth. Zero padding and a Hann window wereto increase the number of frequency bins and toide lobes. We analysed only the penetration data in
of 4–12 s as the fluctuations were more pronouncedme span. The frequency and magnitude of the fluc-become larger with increasing porosity (Figs. 9b andarticular the oscillation frequency is strongly corre-h the porosity (R2 = 0.9, Fig. 10a). We performed anl experiment including a flow dampener in order
that the observed fluctuations are not an effecteristaltic pump. The additional measurement is in
agreement with the results reported here and it clearly indicates that the observed oscillationsn the tablet structure rather than on the pulsationet flow.
findings reinforce the need to consider anisotropic
pores and it further reveals that there are larger build-s which have a low permeability. The liquid thusChemical Engineering Research and Design 1 3 2 ( 2 0 1 8 ) 1082–1090 1089
Fig. 10 – Correlation of the fluctuations with the porosity.(a) Oscillation frequency and (b) amplitude of singlemeasurements as a function of the porosity. Thesefluctuations could not been detected for 3 measurements ofB01 and
by-passea throat
however,erwise ththe interThis surmfine equialong theity factorthe assurates bothchannelsfluid velowhen ine
Furthepore layeity. The
tablets w
4. C
This stuto resolvtablets. Ecritical inlogical fluand at hpharmacnomena
underlyin
Givennot swelcomplex
to perfortechnoloof rapid
ODT.
Acknow
We woulthe FCC
advice. Dneering afunding
lication a(https://d
Appendrelation
The surfafunction
S = 2�R
V = (1 −
with n�R
illaries, tpath, theThe spec
S
V=
he v
2fA
R
g the
h canace a
Sv
2f
f ) Rh
R
re T
ren
ie, G.eterm4–62.ah,
etolaorosigred
05, 12reaunlith139–3
for 2 measurements of B04.
s these blocks of FCC particles and travels throughto the next large pore (see Fig. 8a). This by-passing,
is presumably driven by surface film flow as oth-e inertial retardation of the large volume flow in
agglomerate pore space would slow the imbibition.ise would be consistent with the observably very
valent hydraulic radius. A change in pore diameter streamlines is typically reflected by a constrictiv-
as discussed above. These fluctuations thus supportmption above that the tortuosity in Eq. (4) incorpo-
the “true” tortuosity and the constrictivity. The pore thus constrict and expand leading to variations incity and thus the likelihood of film flow occurringrtial retardation becomes high.rmore, the displacement of the large anisotropic
rs (ı in Fig. 8a and b) increases with increasing poros-fluctuations are less pronounced for low porosityhich is attributed to the lower anisotropy of the pores.
onclusion
dy has successfully demonstrated the use of TPIe the rapid liquid imbibition of highly porous FCCffective disintegration of a pharmaceutical tablet is
ensuring high exposure times of the API to physio-ids, so that the API is absorbed in greater amounts
igher rates, leading to a faster onset of the desiredological effect. By monitoring disintegration phe-
Sv =
T
Seff =
usinR
surf
(1 −
whe
Refe
Archd5
BawuKpin1
Boudu3
on a real-time basis, a deeper understanding of theg mechanisms and factors can be achieved.
Boudreaumuds.
that FCC is practically insoluble in water and doesl, this study provides a useful metric of how morepharmaceutical formulations based on FCC are likelym. The TPI method has proven clear potential to be agy platform for the measurement and quantificationdisintegration processes such as those observed in
ledgements
d like to thank Omya International AG for providingpowder and sharing their valuable experience and.M. and J.A.Z. would like to acknowledge the U.K. Engi-nd Physical Sciences Research Council (EPSRC) for
(EP/L019922/1). Additional data related to this pub-re available at the Cambridge University repositoryoi.org/10.17863/CAM.17255).
ix A. Hydraulic radius–tortuosity
ce area of the pores, S, and the solid volume, V, as aof the hydraulic radius, Rh, can be expressed as
hnLe = 2fAwetLe
Rh
f ) AwetL
2h
≡ fAwet. n, L, Le, f and Awet are the number of cap-he tablet thickness, the average length of the fluid
porosity and the wetted surface area, respectively.ific surface area can then be defined as
2f
(1 − f ) Rh
Le
L.
olume surface area of the pores is modified to
wetL
h,eq
equivalent hydraulic radius, Rh,eq. be related to Rh,eq by considering a constant specificrea:
,eff = Sv
,eq= 2f
(1 − f ) Rh
Le
L
h,eq = RhL
Le= RhT−1,
(A.1)
is the tortuosity.
ces
E., 1942. The electrical resistivity log as an aid inining some reservoir characteristics. Trans. AIME 146,
P., Tan, N., Tweneboah, S.N.A., Ervasti, T., Zeitler, J.A.,inen, J., Peiponen, K.E., 2016. Terahertz study onty and mass fraction of active pharmaceuticalient of pharmaceutical tablets. Eur. J. Pharm. Biopharm.2–133., B.P., 1996. The diffusive tortuosity of fine-grainedified sediments. Geochim. Cosmochim. Acta 60,142.
, B.P., Meysman, F.J.R., 2006. Predicted tortuosity ofGeology 34, 693.
1090 Chemical Engineering Research and Design 1 3 2 ( 2 0 1 8 ) 1082–1090
CaramellaKampdisinteunderPharm
Catellani,water
PharmComiti, J.,
structmeasuparalle
Desai, P.Mdisinte2155–2
Desai, P.Mand th2545–2
Eberle, V.APuchkthe pemini-t
Eberle, V.APuchksystemdissol58, 34–
Esteban, JUndercompa
Hapgood,penetr253, 35
Holm, R.THandb21–55.
Koivula, Hmoistuconsti105–11
Markl, D.,J.A., 20time atransm
Markl, D.,BawuaK.E., Zof funtime-dmicro
Markl, D.,Zeitlerin swePharm
Markl, D.,mecha890–91
Mizuno, Mcalciuterahe
Nakayamdiame732–73
en, Teteromi, H
reparme o, K.P.issolas, Nrces
ystemell,
004. Systemig, Duchkarbonharmbach
isintebach
014. Tal-ti
49–25way,
bsorptructanopedia
ry, S.Vdvanodayelkoppielmf liquterfa
, C., 2iameimanuwyalciuaterimanuchkovel
isper-Goc,
e diy maner-H., 20nctibletssbergedia
enscnalysrocesesouin, S.laddicro
, C., Colombo, P., Conte, U., Ferrari, F., Manna, A.L., Van, H.V., Bolhuis, G.K., 1986. Water uptake andgrating force measurements: towards a general
standing of disintegration mechanisms. Drug Dev. Ind.. 12, 1749–1766.
P.L., Predella, P., Bellotti, A., Colombo, P., 1989. Tabletuptake and disintegration force measurements. Int. J.. 51, 63–66.
Renaud, M., 1989. A new model for determining meanure parameters of fixed beds from pressure droprements: application to beds packed withlepipedal particles. Chem. Eng. Sci. 44, 1539–1545.., Liew, C.V., Heng, P.W.S., 2012. Understandinggrant action by visualization. J. Pharm. Sci. 101,164.., Liew, C.V., Heng, P.W.S., 2016. Review of disintegrantse disintegration phenomena. J. Pharm. Sci. 105,555.., Häring, A., Schoelkopf, J., Gane, P.A.C., Huwyler, J.,
ov, M., 2015. In silico and in vitro methods to optimizerformance of experimental gastroretentive floatingablets. Drug Dev. Ind. Pharm. 42, 808–817.., Schoelkopf, J., Gane, P.A.C., Alles, R., Huwyler, J.,
ov, M., 2014. Floating gastroretentive drug deliverys: comparison of experimental and simulated
ution profiles and floatation behavior. Eur. J. Pharm. Sci.43.., Moxon, T.E., Simons, T.A.H., Bakalis, S., Fryer, P.J., 2017.standing and modeling the liquid uptake in porouscted powder preparations. Langmuir 33, 7015–7027.
K.P., Litster, J.D., Biggs, S.R., Howes, T., 2002. Dropation into porous powder beds. J. Colloid Interface Sci.3–366.., 1991. Convention confusions. In: Palik, E.D. (Ed.),ook of Optical Constants of Solids. Academic Press, pp.
., Alm, H.K., Toivakka, M., 2011. Temperature andre effects on wetting of calcite surfaces by offset ink
tuents. Colloids Surf. A: Physicochem. Eng. Aspects 390,1.
Sauerwein, J., Goodwin, D.J., van den Ban, S., Zeitler,17a. Non-destructive determination of disintegrationnd dissolution in immediate release tablets by terahertzission measurements. Pharm. Res. 34, 1012–1022.
Wang, P., Ridgway, C., Karttunen, A.P., Chakraborty, M.,h, P., Pääkkönen, P., Gane, P., Ketolainen, J., Peiponen,eitler, J.A., 2017b. Characterization of the pore structurectionalized calcium carbonate tablets by terahertzomain spectroscopy and X-ray computed
tomography. J. Pharm. Sci. 106, 1586–1595. Yassin, S., Wilson, D.I., Goodwin, D.J., Anderson, A.,, J.A., 2017c. Mathematical modelling of liquid transportlling pharmaceutical immediate release tablets. Int. J.. 526, 1–10.
Zeitler, J.A., 2017. A review of disintegrationnisms and measurement techniques. Pharm. Res. 34,7.., Fukunaga, K., Saito, S., Hosako, I., 2009. Analysis of
m carbonate for differentiating between pigments usingrtz spectroscopy. J. Eur. Opt. Soc. 4, 09044.a, A., Kuwahara, F., Sano, Y., 2007. Concept of equivalent
Nguyh
Nogapti
Nottd
Peppfos
Pickw2s
PreisPcP
Quodd
Quod2re2
RidgasnM
SastaT
SchoSoIn
Shind
StirnHcm
StirnPnd
Trittthb
WagMfuta
Weism
WildapR
YassGm
ter for heat and fluid flow in porous media. AIChE J. 53,6.
tempe104, 34
., Shen, W., Hapgood, K., 2009. Drop penetration time ingeneous powder beds. Chem. Eng. Sci. 64, 5210–5221.., Nagai, T., Uchida, H., 1966. Studies on powdered
ations. XIV. Wetting of powder bed and disintegrationf tablet. Chem. Pharm. Bull. 14, 152–158.
, 2010. Magnetic resonance imaging of tabletution. Eur. J. Pharm. Biopharm. 74, 78–83.., Colombo, P., 1989. Development of disintegration
during water penetration in porous pharmaceuticals. J. Control. Release 10, 245–250.
E., Cole, B.E., Fitzgerald, A.J., Wallace, V.P., Pepper, M.,imulation of terahertz pulse propagation in biologicals. Appl. Phys. Lett. 84, 2190–2192.
., Haid, D., Varum, F.J.O., Bravo, R., Alles, R., Huwyler, J.,ov, M., 2014. Drug loading into porous calciumate microparticles by solvent evaporation. Eur. J.. Biopharm. 87, 548–558., J., Kleinebudde, P., 2016. A critical review on tabletgration. Pharm. Dev. Technol. 47, 1–12., J., Moussavi, A., Tammer, R., Frahm, J., Kleinebudde, P.,ablet disintegration studied by high-resolution
me magnetic resonance imaging. J. Pharm. Sci. 103,5.
C.J., Gane, P.A.C., Schoelkopf, J., 2006. Achieving rapidtion and extensive liquid uptake capacity in porous
ures by decoupling capillarity and permeability:orous modified calcium carbonate. Transp. Porous
63, 239–259.., Nyshadham, J.R., Fix, J.A., 2000. Recent technological
ces in oral drug delivery – a review. Pharm. Sci. Technol. 3, 138–145.f, J., Ridgway, C.J., Gane, P.A.C., Matthews, G.P.,ann, D.C., 2000. Measurement and network modelingid permeation into compacted mineral blocks. J. Colloidce Sci. 227, 119–131.017. Tortuosity correction of Kozeny’s hydraulicter of a porous medium. Phys. Fluids 29, 023104.n, T., Atria, S., Schoelkopf, J., Gane, P.A.C., Alles, R.,
ler, J., Puchkov, M., 2014. Compaction of functionalizedm carbonate, a porous and crystalline microparticulateial with a lamellar surface. Int. J. Pharm. 466, 266–275.n, T., Di Maiuta, N., Gerard, D.E., Alles, R., Huwyler, J.,
ov, M., 2013. Functionalized calcium carbonate as apharmaceutical excipient for the preparation of orallysible tablets. Pharm. Res. 30, 1915–1925.
J., Kowalczuk, J., 2002. In situ, real time observation ofsintegration of paracetamol tablets in aqueous solutiongnetic resonance imaging. Eur. J. Pharm. Sci. 15, 341–346.attler, L., Wyss, K., Schoelkopf, J., Huwyler, J., Puchkov,
17. In vitro characterization and mouthfeel study ofonalized calcium carbonate in orally disintegrating. Int. J. Pharm., H.L., 1963. Effective diffusion coefficient in porous
. J. Appl. Phys. 34, 2636–2639.hild, D., Sheppard, A.P., 2013. X-ray imaging andis techniques for quantifying pore-scale structure andses in subsurface porous medium systems. Adv. Waterr. 51, 217–246., Goodwin, D.J., Anderson, A., Sibik, J., Wilson, D.I.,en, L.F., Zeitler, J.A., 2015. The disintegration process incrystalline cellulose based tablets, Part 1: Influence of
rature, porosity and superdisintegrants. J. Pharm. Sci.40–3450.