rental rates 2020 - wheeler cat...mini excavators dayweek 4-week 300.9 2,061 lbs., 5’ 6” dig...

wheelercat.com/rental-equipment | 801-908-8900

RENTAL RATES 2020

801-908-8900 | wheelercat.com/rental-equipment

WHO WE ARE:Wheeler Machinery Co. provides an extensive fleet of well maintained, low-hour construction machinery, water trucks, power equipment, GPS, lasers and work tools.

THE WHEELER ADVANTAGE:• Caterpillar and other preferred brands

• Experienced, responsive customer service

• Competitive pricing

• Day, week and 4-week rental options

• Fast delivery to customer job sites

• 24-hour emergency service

PHONE:(801) 908-8900

Day = 8 hrsWeek = 40 hrs4-Week = 176 hrs

SALT LAKE CITY(801) 908-8900

LOGAN(435) 994-3404

OGDEN(801) 732-9100

LINDON(801) 796-0999

VERNAL(435) 789-0635

SALINA(435) 529-7423

CEDAR CITY(435) 267-1201

HURRICANE(435) 251-8448

ELY, NV(775) 289-2466

RENTAL LOCATIONS


Air Compressors / Air Hammers 17

Articulated Trucks 11

Asphalt Paving Equipment 14-15

Asphalt Rollers 14

Backhoe Loaders 9

Compact Track Loaders 9

Compressed Air 22-23

Crack Sealer 15

Customer Insurance 26

Dozers 7

Electrical Distribution 21-22

Excavators 5-6

Freight & Standby Charges 18

Generators 19-21

Hydraulic Excavators 5-6

Light Compaction Equipment 16

Light Towers 17

Milling Machines 15

Mini Excavators 5

Motor Graders 8

Off-Highway Trucks 11

On-Highway Dump Trucks 12

PRODUCTS & SERVICES LIST A-Z

Pavers 14-15

Pneumatic Rollers 14

Power Systems Products 19-23

Pumps 16

Rammers 16

Rental Equipment Protection 24

Rental Terms & Conditions 25

Reversible Vibratory Plates 16

Scrapers 8

Self-Propelled Brooms 16

Skid Steer Loaders 10

Soil Compactors 13

Telescopic Handlers (Telehandlers) 8

Track Loaders 11

Track-Type Tractors 7

Trailers 17

Trench Shields 17-18

Vibratory Plates 16

Vibratory Rollers 13

Wheel Loaders 4

Wheeled Excavators 7

Water Equipment 12

2020 RENTAL EQUIPMENT LIST

PAGE

4


WHEEL LOADERS DAY WEEK 4-WEEK

906M 1.0 yd GP Bucket, 12,346 lbs. $470 $1,350 $3,900908M 1.4 yd GP Bucket, 14,032 lbs. $490 $1,420 $4,100 910M 1.6 yd GP Bucket, 17,893 lbs. $580 $1,660 $4,800914M 1.8 yd GP Bucket, 19,315 lbs. $630 $1,800 $5,200918M 2.5 yd GP Bucket, 21,082 lbs. $660 $1,900 $5,500926M 3.0 yd GP Bucket, 28,770 lbs. $690 $2,000 $5,800926M (coupler & forks) 3.0 yd GP Bucket, 31,270 lbs. $740 $2,150 $6,200930M 3.2 yd GP Bucket, 31,382 lbs. $780 $2,250 $6,500930M (coupler & forks) 3.2 yd GP Bucket, 33,379 lbs. $830 $2,400 $6,900938M 3.5 yd GP Bucket, 35,778 lbs. $890 $2,560 $7,400938M (coupler & forks) 3.5 yd GP Bucket, 38,716 lbs. $940 $2,710 $7,800950 GC 4.0 yd GP Bucket, 41,554 lbs. $960 $2,760 $8,000950 GC (coupler & forks) 4.0 yd GP Bucket, 44,226 lbs. $1,030 $2,970 $8,600950M 4.5 yd GP Bucket, 42,357 lbs. $1,140 $3,280 $9,500950M (coupler & forks) 4.5 yd GP Bucket, 45,029 lbs. $1,210 $3,490 $10,100962M 5.0 yd GP Bucket, 44,591 lbs. $1,190 $3,450 $10,000962M (coupler & forks) 5.0 yd GP Bucket, 47,000 lbs. $1,260 $3,660 $10,600966M 5.5 yd GP Bucket, 51,176 lbs. $1,600 $4,630 $13,400966M (coupler & forks) 5.5 yd GP Bucket, 54,739 lbs. $1,670 $4,840 $14,000972M 6.25 yd GP Bucket, 54,871 lbs. $1,720 $4,970 $14,400980M 7.75 yd GP Bucket, 66,337 lbs. $2,090 $6,040 $17,500982M 9.25 yd GP Bucket, 78,402 lbs. $2,370 $6,870 $19,900988K 10.0 yd GP Bucket, 112,574 lbs. $3,530 $10,210 $29,600990K 11.0 yd Rock Bucket, 178,517 lbs. Call for price992K 14.0 yd Rock Bucket, 220,089 lbs. Call for priceLoader AttachmentsForks 926 to 938 $50 $150 $400 950 to 966 $70 $210 $600 Material Handling Arm $178 $517 $1,500

Wheel Loaders Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

906 – 918 $175 $285 $6.25924 – 938 $340 $520 $7.00950 – 972 $520 $755 $7.95 980* – 982* $755 $965 $10.00 988* $930 $1,125 $14.50

* Additional charges for permits and pilots may apply.**Additional charges for permits, pilot, assembly & disassembly may apply.


PAGE

5


MINI EXCAVATORS DAY WEEK 4-WEEK

300.9 2,061 lbs., 5’ 6” dig depth $210 $590 $1,700 301.7 4,063 lbs., 8’ 4” dig depth $320 $900 $2,600302 4,861 lbs., 8’ 5” dig depth $340 $970 $2,800303 7,204 lbs., 9’ 0” dig depth $340 $970 $2,800303.5 8,209 lbs., 9’ 6” dig depth $410 $1,180 $3,400304 8,996 lbs., 11’ 2” dig depth $460 $1,320 $3,800305 11,443 lbs., 12’ 0” dig depth $500 $1,450 $4,200305.5 11,958 lbs., 12’ 6” dig depth $550 $1,590 $4,600306 15,821 lbs., 13’ 6” dig depth $580 $1,660 $4,800308 18,519 lbs., 13’ 6” dig depth $630 $1,800 $5,200Mini Excavator Attachments Compaction Wheel $74 $215 $620 Extra Bucket (300.9 – 303.5) $37 $107 $310 Extra Bucket (304 – 308) $62 $179 $515 Hydraulic Compaction Plate $123 $357 $1,035 Hydraulic Hammer Same rate as the carrier Auger (includes 1 bit) $74 $215 $620 Extra Auger Bit $20 $54 $155 Auger Extension $10 $28 $80 Ripper Shank $99 $285 $825

Mini Excavators Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

300.9 – 308 $175 $285 $6.25

HYDRAULIC EXCAVATORS DAY WEEK 4-WEEK

311 28,660 lbs., 18’ 4” dig depth $690 $2,000 $5,800313 GC 30,865 lbs., 19’ 8” dig depth $680 $1,970 $5,700313 33,080 lbs., 19’ 8” dig depth $770 $2,210 $6,400315 37,794 lbs., 19’ 5” dig depth $800 $2,320 $6,700316 39,029 lbs., 20’ 0” dig depth $790 $2,280 $6,600320 GC 48,281 lbs., 22’ 0” dig depth $830 $2,400 $6,900320 50,265 lbs., 22’ 1” dig depth $860 $2,490 $7,200323 56,200 lbs., 22’ 1” dig depth $930 $2,690 $7,800325 49,604 lbs., 22’ dig depth $970 $2,800 $8,100326 57,100 lbs., 22’ 3” dig depth $1,030 $2,970 $8,600326 Long Reach 59,500 lbs., 61’ reach at ground $1,220 $3,520 $10,200



PAGE

6


HYDRAULIC EXCAVATORS (CONT.) DAY WEEK 4-WEEK

330 68,100 lbs., 23’ 7” dig depth $1,210 $3,490 $10,100330 Long Reach 69,950 lbs., 61’ reach at ground $1,450 $4,180 $12,100335FL CR (compact radius) 83,820 lbs., 22’ 11” dig depth $1,300 $3,760 $10,900336 81,900 lbs., 26’ 1” dig depth $1,420 $4,110 $11,900349FL 107,145 lbs., 25’ 1” dig depth $2,050 $5,940 $17,200374FL 161,533 lbs., 31’ 6” dig depth $3,220 $9,320 $27,000390FL 198,070 lbs., 35’ 0” dig depth $4,100 $11,870 $34,400Weight and dig depth may vary depending on configuration.Excavators include one standard bucket.Excavator Attachments Compaction Wheel (311 – 325) $185 $535 $1,550 Compaction Wheel (326 – 349) $235 $680 $1,970 Extra Bucket (Cat 311 – 316) $99 $285 $825 Extra Bucket (Cat 320 – 330) $148 $430 $1,240 Extra Bucket (Cat 336 – 349) $197 $570 $1,650 Extra Bucket (Cat 374 – 390) $370 $1,070 $3,100 Hydraulic Hammer Same rate as carrier machine Hydraulic Plate Compactor 50% rate as carrier machine Ripper Shank $185 $535 $1,550 Slope Packer 6’ $370 $1,070 $3,100 Skeleton Bucket $148 $430 $1,240Krypto-Klaw Buckets (Bucket & Thumb Combo) 316 – 36” Krypto-Klaw $345 $1,000 $2,900 320 – 42” Krypto-Klaw $395 $1,150 $3,300 329 – 48” Krypto-Klaw $495 $1,430 $4,150 336 – 54” Krypto-Klaw $570 $1,650 $4,765

HYDRAULIC EXCAVATORS WITH THUMB DAY WEEK 4-WEEK

311 28,660 lbs., 18’ 4” dig depth $840 $2,420 $7,000313 33,080 lbs., 19’ 8” dig depth $910 $2,620 $7,600315 37,794 lbs., 19’ 5” dig depth $950 $2,740 $7,900320 50,265 lbs., 22’ 1” dig depth $1,040 $3,010 $8,700323 56,200 lbs., 22’ 1” dig depth $1,110 $3,210 $9,300325 49,604 lbs., 22’ 0” dig depth $1,140 $3,310 $9,600330 68,100 lbs., 23’ 7” dig depth $1,380 $4,000 $11,600335FL CR (compact radius) 83,820 lbs., 22’ 11” dig depth $1,480 $4,280 $12,400336 81,900 lbs., 26’ 1” dig depth $1,630 $4,739 $13,700349FL 107,145 lbs., 25’ 1” dig depth $2,330 $6,760 $19,600


PAGE

7


Hydraulic Excavators Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

311 – 313 $340 $520 $7.00 314 – 320 $340 $520 $7.00326 – 330 $680 $930 $9.60335 – 336* $755 $965 $10.00349* $860 $1,125 $14.10374**, 390** Call for Quote Call for Quote Call for Quote

WHEELED EXCAVATORS DAY WEEK 4-WEEK

M314F 34,811 lbs., 19’ 0” dig depth $900 $2,590 $7,500M322F 49,229 lbs., 20’ 5” dig depth $1,220 $3,520 $10,200

Wheeled Excavators Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

M314F $340 $520 $7.00 M322F $520 $755 $7.95

TRACK-TYPE TRACTORS DAY WEEK 4-WEEK

D4K2 19,183 lbs., Dozer (6-way) / Ripper $580 $1,660 $4,800D5K2 21,535 lbs., Dozer (6-way) / Ripper $680 $1,970 $5,700D6K2 30,442 lbs., Dozer (6-way) / Ripper $860 $2,490 $7,200D6N / D5 39,198 lbs., Dozer (6-way) / Ripper $1,260 $3,630 $10,500D6N LGP VPAT 42,263 lbs., Dozer (6-way) / LGP $1,350 $3,900 $11,300D6 50,650 lbs., SU Dozer / Ripper $1,710 $4,940 $14,300D6 LGP 51,875 lbs., SU Dozer / LGP $1,820 $5,280 $15,300D8T 90,110 lbs., SU Dozer / Ripper $3,190 $9,250 $26,800D9T 107,074 lbs., SU Dozer / Ripper $4,770 $13,830 $40,100D10T 150,695 lbs., SU Dozer / Ripper $6,710 $19,450 $56,400D11T 232,838 lbs., SU Dozer / Ripper Call for price

Track-Type Tractors Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

D4K, D5K $175 $285 $6.25D6K – D6N $340 $520 $7.00D6 –D6T $680 $930 $9.60D8* $755 $965 $10.00D9* $860 $1,125 $14.10D10**, D11** Call for Quote Call for Quote Call for Quote



PAGE

8


MOTOR GRADERS DAY WEEK 4-WEEK

150 14’ Blade, Ripper, 252 hp $1,500 $4,350 $12,600150 AWD (all wheel drive) 14’ Blade, Ripper, 252 hp AWD $1,670 $4,830 $14,000160M3 14’ Blade, Ripper, 267 hp $1,600 $4,630 $13,400160M3 AWD (all wheel drive) 14’ Blade, Ripper, 267 hp AWD $1,790 $5,180 $15,00014M 16’ Blade, Ripper, 259 hp $1,990 $5,760 $16,70016M 16’ Blade, Ripper, 291 hp $3,870 $11,210 $32,50018M 18’ Blade, Ripper, 304 hp $4,260 $12,350 $35,800

Motor Graders Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

150, 160 $520 $755 $7.95 14, 16*, 18* $680 $930 $9.60

SCRAPERS DAY WEEK 4-WEEK

623K 23 yd heaped Elevating $3,000 $8,690 $25,200627K 22 yd heaped Push-Pull $3,310 $9,590 $27,800631K 34 yd heaped Conventional Call for price637K 34 yd heaped Push-Pull Call for price

Scrapers Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

623 $755 $965 $10.00 627 $860 $1,125 $14.10

TELESCOPIC HANDLERS DAY WEEK 4-WEEK

TH255 6,500 lb. capacity, 42’ lift height $340 $970 $2,800TL642 6,500 lb. capacity, 42’ lift height $500 $1,450 $4,200TH408 8,100 lb. capacity, 24’ lift height $480 $1,380 $4,000TL943 9,000 lb. capacity, 43’ lift height $580 $1,660 $4,800TL1055 10,000 lb. capacity, 55’ lift height $720 $2,070 $6,000TL1255 12,000 lb. capacity, 55’ lift height $780 $2,250 $6,500Telehandler Attachments Truss Jib $178 $517 $1,500

Telehandlers Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

TH255 – TH408 $175 $285 $6.25TL943 – TL1255 $340 $520 $7.00



PAGE

9


BACKHOE LOADERS DAY WEEK 4-WEEK

415F2 IL (Industrial Loader) 24,251 lbs. Gannon Box, 4WD $370 $1,070 $3,100420F E-stick Extend-a-hoe, 17’ 9” dig depth, 4WD $470 $1,350 $3,900420F IT E-stick Extend-a-hoe, 14’ 4” dig depth, 4WD $500 $1,450 $4,200430F E-stick Extend-a-hoe, 19’ 5” dig depth, 4WD $520 $1,490 $4,300430F IT E-stick Extend-a-hoe, 15’ 8” dig depth, 4WD $580 $1,660 $4,800Backhoe Attachments Compaction Wheel $99 $285 $825 Extra Bucket $37 $107 $310 Hydraulic Hammer Same rate as carrier machine Hydraulic Plate Compactor 50% rate as carrier machine Ripper $99 $285 $825

Backhoe Loaders Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

All Sizes $175 $285 $6.25

COMPACT TRACK LOADERS DAY WEEK 4-WEEK

239D3 67 hp, 7,289 lbs., 2,050 lb. capacity $410 $1,180 $3,400249D3 67 hp, 7,685 lbs., 2,300 lb. capacity $420 $1,210 $3,500259D3 74 hp, 8,945 lbs., 2,900 lb. capacity $470 $1,350 $3,900279D3 74 hp, 9,893 lbs., 2,935 lb. capacity $540 $1,560 $4,500289D3 74 hp, 10,533 lbs., 3,800 lb. capacity $570 $1,630 $4,700299D3 98 hp, 11,275 lbs., 4,600 lb. capacity $650 $1,870 $5,400299D3 XE (high flow, high pressure) 110 hp, 11,608 lbs., 4,725 lb. capacity $760 $2,180 $6,300

Compact Track Loaders Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

All Sizes $175 $285 $6.25



PAGE

10


SKID STEER LOADERS DAY WEEK 4-WEEK

226D3 67 hp, 5,705 lbs., 1,500 lb. capacity $320 $900 $2,600236D3 74 hp, 6,559 lbs., 1,800 lb. capacity $350 $1,000 $2,900246D3 74 hp, 7,424 lbs., 2,150 lb. capacity $390 $1,110 $3,200242D3 High Lift 74 hp, 6,980 lbs., 2,150 lb. capacity $360 $1,040 $3,000262D3 High Lift 74 hp, 8,011 lbs., 2,700 lb. capacity $410 $1,180 $3,400272D3 High Lift 98 hp, 8,768 lbs., 3,400 lb. capacity $470 $1,350 $3,900272D3 XE (high flow, high pressure) 110 hp, 9,255 lbs., 3,650 lb. capacity $540 $1,560 $4,500Skid Steer Attachments Angle Blade (angle only) $86 $250 $720 Auger (includes 1 bit) $74 $215 $620 Auger Bit $20 $54 $155 Auger Extension $10 $28 $80 Broom (bristle wear charge $160/in.) $147 $430 $1,240 Brush Cutter $215 $625 $1,800 Brush Mulcher (high flow hyd.) $440 $1,280 $3,710 Bucket (extra) $49 $145 $415 Cold Planer (excluding bits / $7.50 ea.) $220 $640 $1,855 Dozer Blade (angles & tilts) $110 $320 $930 Forks $37 $105 $310 Grapple Bucket $98 $285 $825 Grapple Rake $62 $178 $515 Hydraulic Hammer $295 $855 $2,475 Landscape / Power Rake $110 $320 $930 Skeleton Bucket $50 $145 $415 Trencher $220 $640 $1,850Skidsteer Trailer 20’ Tilt or Ramp $150 $420 $1,200

Skid Steer Loaders Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

All Sizes $175 $285 $6.25



PAGE

11


TRACK LOADERS DAY WEEK 4-WEEK

953K 33,852 lbs., 2.4 yd GP Bucket $1,040 $3,000 $8,700963K 44,138 lbs., 3.7 yd GP Bucket $1,380 $4,000 $11,600

Track Loaders Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

953, 963 $520 $755 $7.95

ARTICULATED TRUCKS DAY WEEK 4-WEEK

725 26.5 Ton Articulated Truck, 50,795 lbs. $1,520 $4,380 $12,700730 31 Ton Articulated Truck, 52,690 lbs. $1,740 $5,040 $14,600740 GC 40 Ton Articulated Truck, 71,377 lbs. $2,250 $6,520 $18,900745 45.2 Ton Articulated Truck, 73,553 lbs. $2,500 $7,250 $21,000

Articulated Trucks Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

725 – 730 $520 $755 $7.95735 – 745* $755 $965 $10.00

OFF HIGHWAY TRUCKS DAY WEEK 4-WEEK

770 42.6 Ton Truck Call for Price772 51 Ton Truck Call for Price773 61 Ton Truck Call for Price775 70 Ton Truck Call for Price777 100 Ton Truck Call for Price

Off Highway Trucks Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

770 – Larger** Call for Quote Call for Quote Call for Quote



PAGE

12


ON HIGHWAY DUMP TRUCKS DAY WEEK 4-WEEK

Dump Truck 6 Yd. 6 Yard, 10’ Dump Body $428 $1,241 $3,600Dump Truck 10 Yd. 10 Yard, 15’ Dump Body $773 $2,241 $6,500*Mileage allowance of 100 per day, 500 per week, 2,000 per 4 weeks. Charge of $0.25 per mile over allowed miles. **CDL and Insurance required for all on highway trucks.

Dump Trucks Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

6 yd, 10 yd $175 $285 $6.25

WATER EQUIPMENT DAY WEEK 4-WEEK

Water Truck, 2,000 gl. On highway, 2,000 gallon $460 $1,320 $3,800Water Truck, 4,000 gl. On highway, 4,000 gallon $800 $2,320 $6,700*Mileage allowance of 100 per day, 500 per week, 2,000 per 4 weeks. Charge of $0.25 per mile over allowed miles. **CDL and Insurance required for all on highway trucks.

621K Water Wagon 8,000 Gallon $2,370 $6,870 $19,900740 Water Truck 8,000 Gallon $2,140 $6,207 $18,000745 Water Truck 9,000 Gallon $2,720 $7,870 $22,800

Water Trailer, 500 gl. 500 gallon water trailer $160 $440 $1,250Water Tower, 12,000 gl. 12,000 gallon stand tank $350 $1,000 $2,900J-Stand Stand Pipe $110 $300 $850

Water Equipment Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

Water Trailers $175 $285 $6.25 Water Trucks $175 $285 $6.25 Water Towers $340 $520 $7.00 613 / 5,000 gal* $520 $755 $7.95 730 / 6,000 gal* $520 $755 $7.95 621 / 8,000 gal* $755 $965 $10.00 740 / 8,000 gal* $755 $965 $10.00



PAGE

13


SOIL COMPACTORS DAY WEEK 4-WEEK

815K 45,765 lbs., 12’ 4” Dozer $2,000 $5,800 $16,800825K 78,326 lbs., 15’ 2” Dozer $3,090 $8,940 $25,900

Soil Compactors Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

815* $520 $755 $7.95 825* $755 $965 $10.00 836* $860 $1,125 $14.10

VIBRATORY ROLLERS DAY WEEK 4-WEEK

Single Drum, PadCP34 11,000 lbs., 50” Drum, 62” Blade $540 $1,560 $4,500CP44 16,083 lbs., 66” Drum, 83” Blade $770 $2,210 $6,400CP56 25,707 lbs., 84” Drum, 99” Blade $960 $2,760 $8,000CP74 36,048 lbs., 84” Drum, 99” Blade $1,090 $3,140 $9,100

Single Drum, SmoothCS34 9,800 lbs., 50” Drum $460 $1,320 $3,800CS44 15,307 lbs., 66” Drum $640 $1,830 $5,300CS54 23,265 lbs., 84” Drum $710 $2,040 $5,900CS56 25,346 lbs., 84” Drum $820 $2,350 $6,800CS68 31,572 lbs., 84” Drum $860 $2,490 $7,200CS74 35,264 lbs., 84” Drum $970 $2,800 $8,100Shell Kits $230 $660 $1,900

Vibratory Rollers Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

CP34, CS34 – CP44, CS44 $175 $285 $6.25 CP56, CS56 – CP74, CS74 $340 $520 $7.00



PAGE

14


ASPHALT ROLLERS DAY WEEK 4-WEEK

Dual DrumCB14 / CB1.7 3,538 lbs., 35” Drums $260 $730 $2,100CB1.8 3,825 lbs., 39” Drums $260 $730 $2,100CB22 5,629 lbs., 39” Drums $300 $870 $2,500CB24 6,003 lbs., 47” Drums $340 $970 $2,800CC24 Combi 5,380 lbs., 47” Combi $340 $970 $2,800CB34 8,157 lbs., 51” Drums $420 $1,210 $3,500CC34 Combi 7,446 lbs., 51” Combi $440 $1,250 $3,600CB7 / CB44 17,615 lbs., 59” Drums $660 $1,900 $5,500CB10 / CB54B 20,945 lbs., 67” Drums $760 $2,180 $6,300CB64B (“B” series) / CB13 27,557 lbs., 79” Drums $850 $2,450 $7,100CB15 / CB66 / CB64 28,958 lbs., 84” Drums $1,030 $2,970 $8,600CB16 / CB68 31,941 lbs., 84” Drums $1,150 $3,320 $9,600Single DrumCCS7 Single Drum 17,000 lbs., 67” Single Drum $740 $2,140 $6,200C110 (CS54) Single Drum 19,840 lbs., 84” Single Drum (Weiler) $980 $2,830 $8,200CCS9 Single Drum 20,580 lbs., 84” Single Drum $980 $2,830 $8,200

Asphalt Rollers Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

CB14 – CB44 $175 $285 $6.25 CCS7 – CB68 $340 $520 $7.00

PNEUMATIC ROLLERS DAY WEEK 4-WEEK

CW14 / CW16 28,528 lbs., 9 Wheel $640 $1,830 $5,300CW34 59,525 lbs., 7 Wheel $1,090 $3,140 $9,100

Pneumatic Rollers Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

All sizes $340 $520 $7.00

ASPHALT PAVING EQUIPMENT DAY WEEK 4-WEEK

P195 Weiler Paver 4’ - 7’ paving width $1,040 $3,000 $8,700P385 Weiler Paver 8’ - 15’ paving width $1,280 $3,690 $10,700AP555F Paver 8’ - 15’ paving width $2,560 $7,420 $21,500 AP1055E Paver 10’ - 20’ paving width $3,240 $9,380 $27,200*Cleaning fee of $500 if not cleaned by customer



PAGE

15


ASPHALT PAVING EQUIPMENT (CONT.) DAY WEEK 4-WEEK

E1250 Weiler Weiler Transfer Machine $3,160 $9,140 $26,500E2850 Weiler Weiler Transfer Machine $3,880 $11,250 $32,600Hopper Insert for E2850 $150 $420 $1,200W530A Road Widener $1,750 $5,070 $14,700Road Widener Attachment RV Road Widener Attachment $475 $1,380 $4,000S200 Soil Stabilizer Bit Wear: $1,008 for 176 bits $1,430 $4,140 $12,000

Asphalt Paving Equipment Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

P385, AP555E, AP655D $340 $520 $7.00 AP1055E, W530A $520 $755 $7.95 E2850 Weiler $755 $965 $10.00

CRACK SEALER DAY WEEK 4-WEEK

Crafco Patcher II $475 $1,380 $4,000Crafco SS125, SS250, EZ1000 $720 $2,070 $6,000Crafco TT250 Tank $260 $730 $2,100*Sealant not included. For sealant, contact: James Clark (602) 309-5017

MILLING MACHINES DAY WEEK 4-WEEK

PM312 48,153 lbs., milling width 4’ 1” $2,500 $7,250 $21,000PM622 74,580 lbs., milling width 7’ 4” $4,050 $11,730 $34,000PM822 80,887 lbs., milling width 7’ 4” $4,720 $13,690 $39,700

Gomaco RTP500 50,000 lbs., rubber track $3,830 $11,090 $32,150

Milling Machines Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

PM312 $520 $755 $7.95 PM622 $680 $930 $9.60 PM822 $755 $965 $10.00



PAGE

16


SELF-PROPELLED BROOMS DAY WEEK 4-WEEK

Ride On Broom (3-wheel) Orops / 8’ Broom / Towable $370 $1,060 $3,050Ride On Broom (4-wheel) Cab / AC / 8’ Broom / Water Kit $520 $1,500 $4,350*Normal bristle wear included in rental. Damage will be prorated based off replacement of all wafers and spacers.

Self-Propelled Brooms Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

Ride On Broom $175 $285 $6.25

LIGHT COMPACTION EQUIPMENT DAY WEEK 4-WEEK

RollersRT82-SC (walk-behind) 3,300 lbs., 33” Dbl Drum Pad $350 $1,000 $2,900RX1575 (walk-behind) 3,307 lbs., 33” Dbl Drum Pad $350 $1,000 $2,900

RammersMTX60 4-Stroke, 141 lbs., 10” x 13” Shoe $110 $300 $850MTX70 4-Stroke, 154 lbs., 11” x 13” Shoe $120 $330 $935

Vibratory PlatesMVC82VGHW 181 lbs., 17.7” Plate Width $100 $280 $805MVC88VTHW 202 lbs., 19.7” Plate Width $100 $290 $830

Reversible Vibratory PlatesMVH508 (diesel) 1,122 lbs., 26” Plate Width $230 $660 $1,900

Light Compaction Equipment Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

All sizes $175 $285 $6.25

PUMPS DAY WEEK 4-WEEK

Diesel Self Priming Pumps4” Diesel Max. 550 GPM, trailer mtd. $240 $690 $2,0006” Diesel Max. 1,425 GPM, trailer mtd. $440 $1,250 $3,600

Pump HoseDischarge Hose 4” / 6” x 50’ discharge hose $20 $40 $110Suction Hose 4” / 6” x 20’ intake hose $30 $60 $150

Diesel Self Priming Pumps Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

4”, 6” $175 $285 $6.25


PAGE

17


TRAILERS DAY WEEK 4-WEEK

TKT14U 4’ deck, 14’ tilt, 14,000 lb. capacity $150 $420 $1,200TKT16U 4’ deck, 16’ tilt, 16,000 lb. capacity $150 $420 $1,200

LIGHT TOWERS DAY WEEK 4-WEEK

Allmand 4 x 1250 watt, 25’ height, hyd. mast $120 $330 $950

Light Towers Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

All sizes $175 $285 $6.25

AIR COMPRESSORS / AIR HAMMERS DAY WEEK 4-WEEK

110 CFM Atlas Copco $150 $420 $1,200185 CFM Atlas Copco, XAS185, 100 psi $210 $590 $1,685

Air Hose 50’ section air hose $15 $30 $60

Air Compressors Under 25 Miles 25 to 60 miles 60+ miles ($ per mile)

All sizes $175 $285 $6.25

TRENCH SHIELDS DAY WEEK 4-WEEK

Heavy-Duty, Double-Wall8 x 12 Box 8’ H x 12’ L, 5,800 lbs., 4” wall $120 $330 $9508 x 16 Box 8’ H x 16’ L, 7,270 lbs., 4” wall $140 $380 $1,1008 x 20 Box 8’ H x 20’ L, 8,920 lbs., 4” wall $170 $480 $1,3758 x 24 Box 8’ H x 24’ L, 11,420 lbs., 4” wall $190 $550 $1,5804 x 12 Stacker 4’ H x 12’ L, 3,750 lbs., 4” wall $90 $260 $7404 x 16 Stacker 4’ H x 16’ L, 4,600 lbs., 4” wall $110 $300 $8504 x 20 Stacker 4’ H x 20’ L, 5,450 lbs., 4” wall $130 $350 $1,0004 x 24 Stacker 4’ H x 24’ L, 6,321 lbs., 4” wall $140 $400 $1,160Extra / oversize spreaders Extra set or 72” & longer spreaders $30 $60 $120Stacking Pins $55/ea. Extra Pins and Retainers $46/ea.



TRENCH SHIELDS CONT. DAY WEEK 4-WEEK

Manhole Shields (4” Double-Wall)8 x 8 Manhole Box 8’ H x 8’ L, 5,110 lbs. $120 $330 $9508 x 10 Manhole Box 8’ H x 10’ L, 6,010 lbs. $140 $380 $1,10010 x 10 Manhole Box 10’ H x 10’ L, 6,860 lbs. $160 $440 $1,2708 x 12 Manhole Box 8’ H x 12’ L, 6,870 lbs. $160 $440 $1,270Manhole shields require 5” diameter spreaders. For width of manhole shield add 4’ to spreader size due to 2’ wrap-around ends. Example: 36” spreaders + 4’ (wrap-around ends) = 7’ box width.

Aluminum Shields (3” Double-Wall)6 x 6 Aluminum Box 6’ H x 6’ L, 843 lbs. $100 $290 $8408 x 10 Aluminum Box 8’ H x 10’ L, 1,383 lbs. $100 $290 $8408 x 12 Aluminum Box 8’ H x 12’ L, 1,563 lbs. $100 $290 $84034” – 88” Adjustable Spreaders; Extra Aluminum Pins & Retainers $23/ea. Trench Plates5 x 10 5’ x 10’, 1” thick steel, 2,050 lbs. $30 $65 $1305 x 12 5’ x 12’, 1” thick steel, 2,725 lbs. $40 $75 $1508 x 12 8’ x 12’, 1” thick steel, 3,950 lbs. $65 $125 $2508 x 16 8’ x 16’, 1” thick steel, 5,300 lbs. $85 $165 $3258 x 20 8’ x 20’, 1” thick steel, 6,650 lbs. $100 $200 $400 Material SeparatorsMS12 Separator w/ 6” screen 7’ W x 11’ 10” L x 9’ H, 8’ x 12’ screen $160 $440 $1,265Additional Screen 2” minus, 3” minus, and 4” minus $75 $220 $440 Gravel BoxesGS-5.5 5.5 cubic yard bedding box $150 $410 $1,165GS-7.5 7.5 cubic yard bedding box $160 $440 $1,265GS-9 9 cubic yard bedding box $170 $480 $1,375

Delivery Rates Under 25 miles 25-60 miles 60+ miles ($ per mile)

All Types $175 $285 $6.25

PLEASE NOTE: • Haulage over 60 miles will bill at 25 to 60 rate plus mileage rate for additional miles.• Customer moves under 60 miles will be billed at $160/hr. for loads that are not oversize. • Oversize loads will be at the book rate.

ADDITIONAL HAULAGE-RELATED CHARGES:1. Escort fees and permits. 2. $150 per hour stand-by time will apply after the 1st half hour at the job site. 3. All parts loads (fall off load) including dozer, bucket, ripper, etc.: Under 25 miles = $175; 25-60 miles = $285, Over 60 miles = $6.25/mile.4. Any assembly charges will be performed by field service at the field service rate.** For haulage of customer-owned machines a $150 minimum will apply.



PAGE

19

POWER SYSTEMS RENTAL RATES

SOUND ATTENUATED GENSETS DAY WEEK 4-WEEK

20kW/25kVA Single Shift $133 $399 $1,198 Double Shift $200 $600 $1,797 Triple Shift $266 $799 $2,396

28kW/35kVA Single Shift $146 $439 $1,317 Double Shift $220 $659 $1,976 Triple Shift $293 $878 $2,633

36kW/45kVA Single Shift $187 $561 $1,683 Double Shift $281 $842 $2,525 Triple Shift $374 $1,122 $3,366

56kW/70kVA Single Shift $242 $726 $2,178 Double Shift $363 $1,089 $3,267 Triple Shift $484 $1,452 $4,356

100kW/125kVA Single Shift $381 $1,142 $3,425 Double Shift $571 $1,713 $5,138 Triple Shift $761 $2,284 $6,851



**A prorated “Service Fee” will be assessed on all rentals (determined by unit size)**

* Day = 8 hrs., Week = 40 hrs., 4-Week = 176 hrs. Rental Equipment Protection does not apply to Power Systems Rental Equipment.



SOUND ATTENUATED GENSETS (CONT.) DAY WEEK 4-WEEK

176kW/220kVA Single Shift $514 $1,541 $4,623 Double Shift $771 $2,312 $6,936 Triple Shift $1,027 $3,082 $9,247



300kW/375kVA Single Shift $787 $2,360 $7,079 Double Shift $1,180 $3,540 $10,618 Triple Shift $1,573 $4,719 $14,157

350kW Tier4i Single Shift $1,029 $3,086 $9,257 Double Shift $1,543 $4,629 $13,885 Triple Shift $2,057 $6,171 $18,513

400kW/500kVA Single Shift $968 $2,904 $8,712 Double Shift $1,452 $4,356 $13,068 Triple Shift $1,936 $5,808 $17,424

500kW/625kVA Single Shift $1,065 $3,194 $9,583 Double Shift $1,597 $4,792 $14,375 Triple Shift $2,130 $6,389 $19,166



1000kW/1250kVA Single Shift $1,936 $5,808 $17,424 Double Shift $2,904 $8,712 $26,136

Triple Shift $3,872 $11,616 $34,848




SOUND ATTENUATED GENSETS (CONT.) DAY WEEK 4-WEEK 2000kW/2500kVA Single Shift $3,957 $11,870 $35,610 Double Shift $5,936 $17,806 $53,416 Triple Shift $7,913 $23,740 $71,221

NATURAL GAS DAY WEEK 4-WEEK

XG135 Standby 135kW / Prime 120kW (sea level) N/A $3,850 $11,550

ELECTRICAL DISTRIBUTION DAY WEEK 4-WEEK

Single Conductor4/0 w/Camloc Ends Single conductor 4/0 Type W cable $12.50 $37.50 $112.50 w/camlocs - 400 amp, each (50’) 4/0 Pigtail Single conductor 4/0 Type W cable $4 $10.50 $36 camloc to bare cable (pigtail) each (3’) 535 MCM Medium voltage, single conductor, N/A $550 $825 750 amp, each (50’)Multi-Conductor10/5 Extensions #10awg/5 wire, 20 amp, 208v, $120 $360 $1,080 3 twistlock ext. cable, each (50’)Power Distribution PanelsQBFP-200 200 amp, quad box feeder panel $55 $165 $495 (provides 24-20 amp, 120v)1000A-BRKRS 1000 amp breakers, 2 ea 1000 amp brkrs $247 $741 $2,223 in a NEMA 1 cabinet 1200A-BRKRS 1200 amp breakers, 2 ea 1200 amp brkrs $247 $741 $2,223 in a NEMA 1 cabinet800A I-Line 800 amp, 3-phase NEMA 3R I-Line Distro N/A $440 $1,320 Panel, 1 hr/breaker @ $100/hr., $200 min. I-Line Breakers Breakers for I-Line Panels, per amp N/A $0.20 $0.60



ELECTRICAL DISTRIBUTION (CONT.) DAY WEEK 4-WEEK

Power Distribution AccessoriesQuadbox String (QBS) Quadbox stringer-30’ spacing (3-20 amp, $33 $99 $297 120v, one quad box every 30’) Spider Box 50 amp, Spider Box (1-30 amp, 250v & $38 $114 $342 6-20 amp, 120v)Cable Ramp Cable Ramps, 5-1.25” channels, 3’ length $16 $48 $144

Resistive / Reactive Loadbanks3.3 MVA 3.3mVA Crestchic Loadbank N/A $9,300 $27,500100kW 100kW @ 240/480 VAC, 3-Phase, N/A $550 $1,750 60 Hz 240/120 Amps Per Phase 6.25 MVA 6.25mVA Crestchic Loadbank N/A $18,700 $55,000400kW 240/480V, 3hp, 60Hz N/A $805 $2,580

Transformers2500 kVA Multi-tap 480 to Medium Voltage $577 $1,731 $5,193 (4160, 12470, 13800) 5000 kVA Multi-tap 480 to Medium Voltage $1,210 $3,300 $7,700 (4160, 12470, 13800)

Transfer Switches2000 AMP 4 Pole – ATS NEMA 3R N/A $735 $2,200

COMPRESSED AIR DAY WEEK 4-WEEK

Low Pressure Machines375CFM Sullivan Palatek Single Shift $308 $924 $2,772

375 cfm @ 150 psi Double Shift $462 $1,386 $4,158 Triple Shift $616 $1,848 $5,544

XAVS400CD Single Shift $308 $924 $2,772400 cfm @ 200 psi Double Shift $462 $1,386 $4,158

Triple Shift $616 $1,848 $5,544

XAVS900 Single Shift $644 $1,932 $5,796860 cfm @ 200 psi Double Shift $966 $2,898 $8,694

Triple Shift $1,288 $3,864 $11,592




PAGE

23


COMPRESSED AIR (CONT.) DAY WEEK 4-WEEK

XAMS1150 Single Shift $675 $2,025 $6,0751150 cfm @ 125 psi Double Shift $1,013 $3,038 $9,113

Triple Shift $1,350 $4,050 $12,150

XAS1800CD Single Shift $990 $2,970 $8,9101775 cfm @ 100 psi Double Shift $1,485 $4,455 $13,3651620 cfm @ 150 psi Triple Shift $1,980 $5,940 $17,820

200 HP Oil Free Electric 785CFM @ 125 psi $1,155 $3,465 $10,395Oil Free Compressors ** Call for Quote **

High Pressure MachinesXRVS1000 Single Shift $1,100 $3,300 $9,900

1000 cfm @ 365 psi Double Shift $1,650 $4,950 $14,850 Triple Shift $2,200 $6,600 $19,800

XRYS1260 Single Shift $1,320 $3,960 $11,8801426 cfm @ 300 psi Double Shift $1,980 $5,940 $17,8201207 cfm @ 510 psi Triple Shift $2,640 $7,920 $23,760

XRVS1350 Single Shift $1,375 $4,125 $12,3751335 cfm @ 365 psi Double Shift $2,063 $6,188 $18,563

Triple Shift $2,750 $8,250 $24,750

2” Hose 25’ Length $25 $75 $2253 inch High Pressure Up to 600PSI, Boss Fitting $99 $297 $891

Dessicant DryerRDH-450 450 cfm @ 100 psi N/A $499 $1,498RDH-930GAC 930 cfm @ 100 psi, with Aftercooler N/A $1,180 $3,541RDH-1550 Dessicant, heatless regenerating twin N/A $1,407 $4,222

1550 cfm @ 100 psi tower - 3” fitting (120 V source needed) 1800ZPA 1800 cfm @ 100 psi N/A $1,650 $4,950

Graco Vapor Abrasive Blast EquipmentEQ100M Integral Hand Truck Assembly, connects $133 $399 $1,197 to any 185-350 cfm air compressorEQ600S Stand Alone unit, connects to 375-600 cfm $272 $816 $2,448 air compressorMedia Quoted depending on type needed ** Call for Quote **



PAGE

24

Under Rental Equipment Protection (REP), Wheeler Machinery Cat Rental Store will not hold you responsible for most causes of damage while the equipment is out on rent. In the event of a loss, REP will cover the replacement or repair of the damaged equipment. Account customers may opt out of this program if proof of insurance is provided. Coverage is mandatory for all non-account (cash) customers or if proof of insurance can’t be provided.

COST• 16% of rental charges

DEDUCTIBLE• $1,000 for equipment valued less that $24,999• $2,500 for equipment valued over $25,000• For equipment valued over $500,000 contact your Wheeler Representative.

WHAT’S COVERED• Accidental damage • Flood • Collisions • Hail − Collision damage (to the rented equipment ONLY) • Overturns − Impact damage (collision, equipment driven over) • Theft• Earthquake • Tornado• Fire • Vandalism• Falling Objects • Wind

EXCLUSIONS• Civil Authority • Nuclear hazard• Contamination or deterioration • Pollutants• Criminal, fraudulent, dishonest, or illegal acts • Temperature/Humidity• Loss of use • Voluntary parting with title• Mechanical breakdown • War and military action• In Transit • Wear and tear• Missing property (Unexplained or mysterious disappearance)

ADVANTAGES OF REP• Provides higher certainty of coverage• Hassle free claims in the event of a loss• Provides an option for customers who can’t provide proof of insurance coverage• Claims will not affect customer’s other insurance premiums• No waiting for coverage through insurance company

REQUIREMENTS FOR OPTING OUTCustomers have the option of waiving coverage by providing proof of insurance coverage from their agent.• Proof of insurance consists of certificate of property insurance showing specific or blanket

rented equipment coverage.• Proof of insurance must be faxed, photocopied, or emailed before the rental equipment leaves

the yard.• Proof of insurance must be supplied to the Cat Rental Store before rental equipment ships or

non-refundable REP charges will apply.• Customers who have provided proof of insurance may still elect to be covered by REP at their

discretion.

RENTAL EQUIPMENT PROTECTION


PAGE

25

RENTAL TERMS AND CONDITIONS

RENTAL TERMS AND CONDITIONS: (see rental agreement for complete terms and conditions)

Lessee agrees to return machine clean and in good condition, less normal wear and tear with a full tank of fuel. If machine is returned dirty or low of fuel, cleaning and fuel servicing charges will apply.

Standard rental rates based on single shift at 176 hours a month, 40 hours a week and 8 hours a day. Additional hours accumulated will be billed accordingly. Rates do not include sales tax, insurance or freight.

OVERTIME RATES

Daily Rental – Rate divided by 8.Weekly Rental – Rate divided by 40.4-Week Rental – Rate divided by 176.

RENTER’S RESPONSIBILITIES:• Normal maintenance and service of machine, including changing all lubricants and fluids at

required intervals. Wheeler Machinery Co. offers on-site lube and oil service at an additional cost.

• Replacing teeth and cutting edges as needed

• All wear or damages to rubber tires

• Cylinder head breakage caused by lack of or low coolant

• Maintaining physical damage insurance coverage on rental machines, or accepting the terms and conditions of Wheeler Machinery Co.’s Rental Equipment Protection (REP) and paying a charge of 16 percent of the gross rental charges. Wheeler Machinery Co.’s REP is not available for trucks licensed for use on public highways. The customer must maintain auto liability and physical damage coverage for on-highway vehicles rented from Wheeler Machinery Co.

Rates are FOB Wheeler Machinery Co.’s yard.

Rates are subject to change without prior notice.

Machines are subject to availability.

CUSTOMER INSURANCE

CUSTOMER INSURANCE REQUIREMENTS: (for Rented/Leased Equipment) All customers are required to have general liability insurance and Rental Equipment Protection as outlined below:

ON-HIGHWAY CONSTRUCTION EQUIPMENT (Licensed for use on public highways)1. Business auto liability insurance: $1,000,000 per occurrence.2. Auto physical damage insurance: Full value of trucks: • Specify trucks rented or leased from Wheeler Machinery Co. • Include coverage for hired and non-owned autos • Name Wheeler Machinery Co. as an additional insured and loss payee

OFF-HIGHWAY CONSTRUCTION EQUIPMENT1. Commercial general liability insurance: $1,000,000 per occurrence, covering: • Customer’s operations • Wheeler Machinery Co. as an additional insured2. Physical Damage Insurance: Full value of equipment, covering: • Rented or leased equipment using a contractor’s equipment floater form or comparable form • Name Wheeler Machinery Co. as loss payee • The Physical Damage Insurance requirement shall not apply if customer participates in and pays for Wheeler Machinery Co.’s Rental Equipment Protection

EVIDENCE OF INSURANCE1. Customer must provide Wheeler Machinery Co. with a certificate of insurance confirming: • Appropriate coverage is in full force and effect • Such insurance may not be canceled or materially modified except by first giving Wheeler Machinery Co. 30 days prior written notice2. Please mail insurance certificates to: Wheeler Machinery Co. / Cat Rental Store 4901 West 2100 South Salt Lake City, UT 84120 Attn: Rental Department

Or you can email to: [email protected]


NOTES

PAGE

27


UTAH MILEAGE CHART

801-908-8900 | wheelercat.com/rental-equipment |

rental rates 2020 - wheeler cat...mini excavators dayweek 4-week 300.9 2,061 lbs., 5’ 6” dig...

Documents