renovation of laran lawns, the international centre goa ...renovation of laran lawns, the...

Renovation of Laran lawns, The International Centre Goa

Annexure A - BoQ

SR.NO Description Unit Qty Rate Amount

1.0

Demolishing of cement concrete, laterite stone masonry in cement

mortar & Structural steel work including stacking of serviceable

material & disposal of unserviceable material within 50 mts. lead.

a) Existing Toilet block Job 1.00

b) Existing stage Job 1.00

c) Existing shed for Buffet Job 1.00

d) Existing water Body (Fountain) Job 1.00

e) Existing compound wall for service entry Job 1.00

2.0

Earthwork in excavation by mechanical means (hydraulic

excavator)/manual means in foundation, pipeline trenches, drains

(not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing

of sides and ramming of bottoms, lift upto 1.5 m including getting out

the excavated soil and disposal of surplus excavated soil as directed

within a lead of 50 m.

a) All kinds of soil Cumt 391.00

b) Lateritic rock Cumt 260.00

3.0

Providing Rubble packing with hard laterite stone under floors

including watering ramming and consolidating etc. in pipeline

trenches and other foundations all complete.

Cumt 232.00

4.0

Refilling the pipeline/foundation trenches plinth sides, foundation etc.

with available excavated earth in layers not exceeding 20 cm depth

consolidating each layer ramming and watering lead upto 50 M and

all lifts and disposal of surplus earth as directed by Engineer in

Charge.

Cumt 561.00

5.0

Providing & laying cement concrete 1:3:6 (1 cement : 3 coarse sand :

6 graded granitic or basaltic stone aggrt. 40 mm. nominal size)

including cost of centering, shuttering and finishing in:

a) All works upto plinth level Cumt 63.00

6.0

Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4

graded granitic or basaltic stone aggrt. 20 mm. nominal size)

including cost of centering, shuttering and finishing in:

a) All works upto plinth level Cumt 105.00

7.0

Providing and laying in position (1:11/2:3) Reinforced cement conrete

including the cost of centering, shuttering, finishing and reinfrocement

(1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size)

a) All works up to plinth level Cumt 11.00

b)

In walls (any thickness), including attached pilasters, buttresses,

plinth and string courses, fillets, columns, pillars, piers, abutments,

posts and structs etc. upto floor five level

Cumt 3.00

c) In Plinth beams Cumt 12.00

d)

in beams, suspended floors, roofs having slope , landings, balconies,

shelves, chajjas, lintels, bands, plain window sills, staircases upto

floor five level

Cumt 20.00

8.0

Providing TMT steel reinforcement bars of SAIL, TATA. VIZAG made

only (Confirming to IS 1786 of 1986) for RCC work (conforming to

I.S. 1786 of 2000) including bending, binding & placing in position in

all the floors along with the factory made precast concrete cover

blocks of specified sizes whose compressive strength is not less than

that of surrounding concrete in the structural member.

Kgs 4600.00

CIVIL WORK(A)

ABSTRACT

9.0

Providing Laterite masonry in neatly dressed stones of size as

specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in

foundation and basement.

Cumt 119.00

10.0

Providing Laterite masonry in neatly dressed stones of size as

specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in

superstructure from floor I level upto floor V level.

Cumt 57.00

11.0

Providing Half brick masonry in cement mortar 1:4 (1 cement

: 4 coarse, sand) with bricks of class designation 75 kg/ sq. cm upto

floor five level .

Sqmt 121.00

12.0Providing 12mm cement plaster 1:3 (1 cement : 3 fine sand) including

all materials, labours, tools & plants all Complete.Sqmt 524.00

13.0Providing 6mm cement plaster to ceiling 1: 3 (1 cement : 3 fine sand)

including all materials, labours, tools & plants all Complete.Sqmt 90.00

14.0

Providing 18mm cement plaster in two coats under layer 12mm thick

cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm

thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with

sponge including all materials, labours, tools & plants all Complete.

Sqmt 461.00

15.0Providing & finishing fine with ready Birla wall care putty over plaster

surface including all materials, labours, tools & plants all Complete.Sqmt 308.00

16.0

Providing & fixing 35mm thick Laminate finished flush door shutters

as per design of decoration type core of block board construction

(Marine BB) with hard teak wood beading patti and well matched

laminate as approved by the Architect on both faces of shutters

including locks, handles, floor spring if required, tower bolts etc. All

non laminate surfaces of doors to be finished with french polish &

including all tools & plants complete.

a) 35mm thick including SS hinges with necessary screws: Sqmt 34.00

17.0

Providing woodwork in frames of doors & windows fixed in positon

including finishing with melamine polish & including all materials,

tools & plants complte.(size 100X65mm)

a) First class Indian teak wood Meter 44.00

18.0Providing Granite in frames of doors as per design and fixed in

positon including polishing moulding etc all complete.

a) Granite frames fot toilet Meter 51.00

19.0

Providing and fixing adjustable anodized aluminium Ventilators

including all taxes, transportation, scaffolding and handling etc.

complete as per direction of the Engineer-in-charge: ventilators

matching with 18 mm series shutters.

Plain glass Sqmt 5.00

20.0

Providing and fixing sliding anodized aluminium glass shutters

including all taxes, transportation, scaffolding and handling etc.

Complete & as per direction of the Engineer-in-charge: Sliding

windows matching with 18 mm series shutters.

Plain glass Sqmt 4.00

21.0

Wall painting (two or more coats) with plastic emulsion paint of

approved brand and manufacture including priming coat on new work

to give an even shade including all materials, labours, tools & plant all

Complete.

Sqmt 308.00

22.0

Painting three or more coats with acryllic exterior paint of approved

brand and manufacture (such as weather shield,APEX) including

applying one coat of cement primer and one coat of surface treatment

etc. including all materials, labours, tools & plant all Complete.

Sqmt 461.00

23.0

Providing and and laying vitrified floor tiles in different sizes of

Johnson, Somany, Kajaria (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming

to IS:15622 of approved make in colours and shades as specified

laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand)

including grouting the joints with white cement and matching pigment

etc., complete

a) 600x 600 mm Sqmt 57.00

24.0

Providing and fixing 1st quality ceramic glazed wall tiles (Johnson,

Somany, Kajaria )conforming to IS:15622 (thickness to be specified

by the manufacture of approved make in all colours, shades except

burgundy, bottle green, black of any size as approved by Engineer-in-

charge in skirting, risers of steps and dados over 12 mm thick bed of

cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey

cement slurry @3.3kg per sq.m including pointing in white cement

mixed with pigment of matching shade complete.

b) Wall Ceramic Glazed Tiles : 300 x 450 Sqmt 220.00

25.0

Providing and fixing vitrified antiskid tiles (320x320) and 10mm thick

tiles in floor, treads of steps, landing on 25mm thick bed of cement

mortar 1:3 and jointed with cement slurry complete.

Sqmt 16.00

26.0

Kotah stone slab flooring over 30 mm (average) thick base of cement

mortar 1:4 (1 cement : 4 coarse sand) laid over & jointed with grey

cement slurry mixed with pigment to match the shade of the slab

including rubbing & polishing complete

a) 25 mm thick. Sqmt 435.00

27.0

Providing and laying Granite slab stone flooring ( river washed) in

required design and patterns, in linear as well as curvilinear portions

of the building all complete as per the architectural drawings with 18

mm thick stone slab over 20 mm (average) thick base of cement

mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement

slurry and pointing with white cement slurry admixed with pigment of

matching shade including rubbing, curing and polishing etc. all

complete as specified and as directed by the Engineer : River washed

finish granite stone slab.

a) 18 mm thick. Sqmt 326.00

28.0

Providing and fixing 18 mm thick Jet Black granite stone gang saw

cut, mirror polished, premoulded and prepolished, machine cut for

kitchen platforms, vanity counters, window sills, facias and similar

locations of required size, approved shade, colour and texture laid

over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse

sand), joints treated with white cement, mixed with matching pigment,

epoxy touch ups, including rubbing, curing, moulding and polishing to

edges to give high gloss finish etc. complete at all levels. Granite of

any colour and shade, area of slab over 0.50 sqm

Sqmt 20.00

29.0

Providing and laying jet black mirror polish granite stone in

flooring,dado & urinal partitions over 20mm thick base of cement

mortar 1:4 laid over and jointed with cement slurry including rubbling

complete Granitic slab (jet blck with mirror polish) 20 mm thick.

Sqmt 34.00

30.0

Providing 25 mm thick cuddapah slabs machine cut and polished on

either side in partitions including making necessary grooves in the

wall and fixing with cement mortar, complete as directed by the

engineer-in-charge

Sqmt 52.00

31.0

Providing water proofing treatment over the new R.C.C. roofs terrace

toilet by spreading cement slurry over the R.C.C. slab and laying of

10cms. Average laterite stone ballast coba with the necessary

gradient for easy flow of rain water and the coba in covered with

damp proof of Hindustan water proofing co. Or equivalent jointless

water proofing plaster of mix 1:3 ( 1 cement : 3 find sand), finished

smooth with wooden trowel with false marking of 30 cms square. The

vertical surface of the adjoining walls are to be treated upto a height

of 30cms including rounding of junction (the rate includes for

complete items including labour and materials and including cost of

initial treatment of roof slab as follows. The injunction of damp proof

or equivalent compound with cement solution will be given as and

when found necessary for filling honey comb, cracks etc. in the

R.C.C. slabs). NOTE: cement consumption 25 kg/sq.m.

Sqmt 32.00

32.0

Providing anti – termite treatment to buildings conforming to I.S.S.

6113 part II 1971 (revised) including adopting precautions for health

hazards and safety measures as required therein with the cost of all

materials, chemicals, plants, equipments required for the treatment

and furnishing a guarantee for a minimum period of 10 years from the

date of completion including eradicating any infestation of termite

free of cost during the guaranty period complete. (The payment will

be made on plinth of the building.

a) Pre-construction Sqmt 539.00

33.0Providing and laying 1

st class mangalore tile roof covering with

cement plaster batten including Brick rafters including all materials,

labours, tools & plant all Complete.

Sqmt 65.00

34.0Providing and laying ridge tiles laid dry & pointed with cement mortar

1: 2 including all materials, labours, tools & plant all Complete.Meter 30.00

35.0

Providing Steel work in welded (SAIL, TATA. VIZAG & using

electrodes of Ador or ES4B or Deh Secheron make only) in built up

sections trusses and framed work including cutting, hoisting, fixing in

position and applying priming coat of red lead paint including Painting

(two or more coats) with synthetic enamel paint of approved brand

and manufacture in all shade including all materials, labours, tools &

plant all Complete.

a) In tees, angles, flats and channels Kg 262.00

b) In MS steel plates Kg 277.00

c) In Hollow tube sections etc. Kg 7946.00

36.0

Providing and fixing colour coated galvulium roofing sheets of 0.5mm

thickness including all the accessories (TATA make) but excluding

the cost of purlins, rafters, trusses, flashings etc. complete as per the

directions of the Engineer in charge.

Sqmt 402.00

37.0

Providing & fixing in position Galvalume flashings, cappings, ridges,

gutters upto 600mm/610mm girth and min 3.00m in length (cold

Rolled Steel 550 MPa yeild Stress ASTM A 446 Grade E) with hot-dip

metallic coating of aluminium-zinc alloy(AZ 150 galvalume) (150

gms/sqm total of both sides with Al-Zn Composition= 55% & 43.5%

resp. & 1.5% Si conforming to ASTM 792/ AS 1397) 0.45 mm base

metal thickness and 0.50mm total coated thickness, factory cut at all

heights for roof, side & gable cladding complete in all respects with

AZ 150 GSM SMP color Coated (20mic exterior coat of Silicon

Modified Polyester paint system over 5 mic primer and 5 mic

polyester back coat over 5 mic primer) incl. fixing to purlins with no

12x14x55mm mechanically galvanised hex head self drilling screws

of the best quality as per AS-3566 class 3-4 approved, which should

be compatible to be used with sheets. with integral washers and

EPDM seals etc. Silicon sealant non-hardening neutral cure type

shall be applied at all end laps, complete as directed.

Meter 82.00

38.0

Providing & fixing in position Anchor bolt & Nut system made out of

16mm dia steel bars including Holding the bars in position during

concreting including labour, materials, tools & plant all complete.

Nos 32.00

39.0

Supplying and fixing Pre-cast cement concrete kerb-stones(factory

made,the factory should be ISO certified and registered under

Dirctorate of Industries, Govt. of India) of M-20 with 20 mm nominal

size granitic/basaltic aggregate properly consolidated by mechanical

plat-form and vibrators with smooth finish including fixing at site

complete as per specification.

Size 30 cm L x 50 cm H x 15 cm T Meter 158.00

40.0

Providing & fixing in position wooden Column members 3.00 meters

height made out of 1st class Indian Teak wood as per Architect

design resting on Concrete pedestal including polishing & all the

Accossories required for fixing Wooden Column to Concrete Pedastal

including all labour, materials, tools & plant all complete.(Concrete

pedestal to be paid separately).

Nos 4.00

41.0

Providing & fixing in position wooden Beam members made out of 1st

class Indian Teak wood as per Architect design resting on wooden

column members including polishing & all the Accossories required

for fixing Wooden beams on to the wooden columns including all

labour, materials, tools & plant all complete.

Meter 60.00

42.0

Providing and fixing prefabricated compound steel gate as per

drawing including providing & fixing locking arrangements, pintals,

hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse

sand : 4 granitic or basaltic aggreate 20mm nominal size) including

applying priming coat with ready mixed red lead paint and painting 2

or more coats with superior ready mixed paint of approved brand and

manufacture in all shades as per direction complete.

Sqmt 5.00

43.0

TRANSPORTATION AND CARRIAGE OF MATERIALS By tipper

truck (8-10m3 capacity) including loading, unloading and stacking

moorum, building rubbish Excavated rock & Earth all complete

including tools & plants all complete.

Trips 3.00

Total Cost of Civil Work (A)

(Rupees )

SR.NO Description Unit Qty Rate Amount

1.0

Providing and fixing floor mounted (European Type) water closet of

size 655x365x760, S Trap -300mm with seat cover & lid of approved

make & manufacture (JAQUAR) with C.I. brass hinges and rubber

fittings with flush valve fully chromium plated withall necessary

Cistern fittings etc. including chair bracket/rag bolts, cutting & making

good the walls and floors where required and concealed seat support

. Model No: JAQUAR LYS-WHT-38851 S LYRIC

Single piece W/C

No 10.00

2.0

Providing and fixing C.P. Brass toilet Tissue paper holder of

approved make & manufacture (JAQUAR) including all materials,

tools & plants all complete. Model No: JAQUAR AKP-35751P

Nos 10.00

3.0

Providing and fixing Health Faucet (Allied) with 1.00m long Flexible

tube (Brass plated stainles steel flexible hose) and wall hook of

approved make & manufacture (JAQUAR) confirming to IS standards

Model No: JAQUAR ALD-573

Nos 10.00

4.0

Providing and & fixing white counter Top wash basin 200X570X415

size of approved make & manufacture (JAQUAR) including waste

coupling full Treaded (Allied) making all connection but excluding the

cost of fittings. Basin Model No: JAQUAR (Florentine) FLS-

WHT-5601. Waste

Coupling Model No: JAQUAR ALD-705

Nos 10.00

5.0

Making opening of required size & shape for wash basin waste

coupling in counter and similar location in marble/Granite/Cuddapah

stone work, including necessary holes for pillar taps etc. including

moulding, rubbing and polishing of cut edges etc. complete.

Nos 10.00

6.0

Providing and fixing NICKEL chrome plated copper alloy Fancy

BOTTLE TRAP (Allied) of Jaquar make for wash basin. Model No:

JAQUAR -ALD-769

Nos 10.00

7.0

Providing and fixing NICKEL chrome plated copper alloy Single Lever

Basin Mixer wihthout popup of approved make & manufacture

(Jaquar) with wall flange, 15mm nominal bore all complete.

Model No: JAQUAR (Florentine) -FLR-5001B

Nos 10.00

8.0

Providing & fixing liquid soap Dispenser with glass Bottle of approved

make & manufacture (Jaquar) with brackets fixed to wooden cleats

with C. P. brass screws. Model No: JAQUAR -ACN-1135N

Nos 10.00

9.0

Providing & fixing C.P brass single towel rail of approved make &

manufacture (Jaquar) including all complete with C.P. brass brackets

fixed to wooden cleats with C. P. brass screws. Model No: JAQUAR -

AQN-7711B

Nos 10.00

10.0

Providing and fixing white flat back front urinal basin of

710X485X310mm size of approved make & manufacture (Jaquar)

with Sensotronic Sensor Flushing Valve for Urinal with complete Kit

including all required wall flanges, fittings, spreader, R.S. or C.I.

brackets all complete. Urinal Model No: JAQUAR -URS-WHT-13255

& Sensotronic Sensor Flushing valve model No: JAQUAR-SNR-CHR-

51097

a) One urinal basin with Sensor flushing Valve. Nos 4.00

11.0

Providing and fixing nahani trap of rigid PVC of approved make &

manufacture for S.W.R. pipes including lubricating etc complete, with

door :

a) 110 mm dia Nos 14.00

PLUMBING WORK(B)

ABSTRACT

12.0Providing and fixing SS Coakroach trap of approved make &

manufacture( Nirali) for S.W.R. pipes etc all complete.Nos 14.00

13.0

Providing and fixing single “Y” of rigid PVC of approved make &

manufacture for S.W.R. pipes including lubricating etc complete, with

door :

a) 110 mm dia Nos 10.00

14.0

Providing and fixing NICKEL chrome plated copper alloy Angle stop

cock 15 mm bore Jaquar make for EWC & Health Faucet including

wall Flanges etc all complete.Model No: JAQUAR -3057N

Nos 20.00

15.0

Providing and fixing NICKEL chrome plated copper alloy Angle stop

cock (Fusion) 15 mm bore Jaquar make for wash basin including wall

Flanges etc all complete.Model No: JAQUAR -FUS-29053

Nos 10.00

16.0

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes of

approved make & manufacture (ASTRAL) confirming to IS:15778,

having thermal stability for hot and cold water supply including all

CPVC plain and brass threaded fittings including fixing the pipes with

clamps at 1 mt. spacing. This includes jointing of pipes and fittings

with one step CPVC solvent cement and testing of joints complete as

per direction of the Engineer-in-charge. Concealed work (medium

duty SDR 13.5 pipe) including cutting chases and making good the

walls etc.

a) 15 mm dia nominal outer dia pipes. M 80.00

b) 20 mm dia nominal outer dia pipes. M 60.00

c) 25 mm dia nominal outer dia pipes. M 170.00

d) 32mm dia nominal outer dia pipes. M 25.00

17.0

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes of

approved make & manufacture (ASTRAL) confirming to IS: 15778

having thermal stability for hot and cold water supply includng all

CPVC plain and brass threaded fittings CPVC solvent cement,

trenching, refilling and testing of joints complete as per direction of

the Engineer in charge.(External work (heavy duty SDR 11 pipe)





e) 40mm dia nominal outer dia pipes. M 3.00

f) 50mm dia nominal outer dia pipes. M 3.00

18.0

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes of

approved make & manufacture (ASTRAL) confirming to IS:15778,

having thermal stability for hot and cold water supply including all

CPVC plain and brass threaded fittings including fixing the pipes with

clamps at 1 mt. spacing. This includes jointing of pipes and fittings

with one step CPVC solvent cement and testing of joints complete as

per direction of the Engineer-in-charge. Internal work exposed on wall

(Medium duty SDR 13.5 pipe).





e) 40mm dia nominal outer dia pipes. M 3.00

f) 50mm dia nominal outer dia pipes. M 3.00

19.0Providing and fixing brass Angle valve of approved make &

manufacture (ZOLOTO or equivalent) :15 mm nominal boreNos 10.00

20.0

Providing and fixing rigid PVC S.W.R. (soil, waste & rain water

drainage pipes) of approved make including lubricant etc. complete

(single/double) socketed:

a) 150 mm dia M 22.00

b) 100 mm dia M 22.00

c) 75 mm dia M 10.00

21.0

Constructing brick masonry manhole or inspection chamber with

second class bricks in cement mortar 1:5 (1 cement :5 fine sand)

R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded

stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1

cement ;2 coarse sand :4 graded stone agrregate 40mm nominal

size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement

:3 coarse sand) finished with a floating coat of neat cemetn and

making channels in cement concrete 1:2:4 mix (1 cement :2 coarse

sand :4 graded stone aggregate 20 mm nominal size) neatly finished

complete as per standard design.

a)

Inside size 90 x80 cm and 60 cm deep including C.I. cover with

frame (light duty) 455 x 610 mm internal dimensions total weight of

cover and frame to be not less than 38 kg. (weight of cover 23 kg.)

Nos 10.00

b)

Inside size 60 x 60cm and 60cm deep including C.I. cover with frame

(light duty) 455x610mm internal diameter total weight of cover and

frame to be not less than 38 kg. (weight of cover 23 kg).

Nos 20.00

22.0

Providing and fixing square-mouth S.W. gully trap grade ‘A’ complete

with c.i. grating brick masonry chamber and water tight C.I. cover with

frame of 300 x 300 mm size (inside the weight of cover to be not less

than 4.53 kg). And frame to be not less than 2.72 kg as per standard

design :

a) 150 x 100 mm size –P or S type Nos 10.00

23.0 Providing and fixing R.P.V.C. vent cowl:

a) 110 mm dia Nos 1.00

b) 75 mm dia Nos 1.00

24.0

Dismateling of old S.W.R pipes including breaking of joints and bed

concrete stacking of useful materials near the site within 50 m lead

and disposal of unserviceable materials into municipal dumps:

a) 100 mm diameter . M 10.00

b) 150 mm diameter M 10.00

25.0

Providing and fixing Nirali Stainless Steel kitchen sink without drain

board. with coupling & all accessories complete with choke stop

strainer, Plain type having flat borders for correct sandwithing

between the plaform top and bottom slabs including cutting of stone

and making good the walls wherever required. Kitchen sink

complete.

a)

Overall size 610mm X510mm (24"x20") bowl size

545mmX445mmX200mm (211/2"x 17 1/2"x 8") depth 200 mm.

Glossy. 1.0mm thk

Nos 1.00

26.0

Providing and fixing Nirali Stainless Steel kitchen sink with drain

board. with coupling & all accessories complete with choke stop

strainer, Plain type having flat borders for correct sandwithing

between the plaform top and bottom slabs including cutting of stone

and making good the walls wherever required. Kitchen sink

complete.

a)

Overall size 1040mmx510mm (41"x20") bowl size

460mmx410mmx200mm (18"x 16"x 8") depth 200 mm. Glossy.

1.0mm thk,

Nos 1.00

27.0Pressure Testing & commissioning of water supply Pipes including all

materials, labours, tools & plants all complete.JOB 1.00

Total Cost of Plumbing Work (B)

TOTAL COST INCLUDING CIVIL & PLUMBING WORK (A+B) Rs. 0.00

Basic rates of Materials considered for Quoting above rates

1 Cement

2 Sand

3 Metal

4 Laterite Stones

5 Bricks

6 Steel Reinforcement

7 Structural Steel

a) Angles

b) Channels

c) Ms Plates

d) Box Sections

e) Flats

8 Vitrified floor tiles

9 Antiskid floor tiles

10 Glazed wall tiles

11 Polished Kota stone

12 Cuddapah stone

13 Granite Stone

14 Teak wood

15 Laminate

16 Galvalume Sheets

17 Flush door Shutter

Basic rates of Labour considered for Quoting above rates

1 Mason

2 Male Coolie

3 Female Coolie

4 Carpenter

(Rupees )

SR.NO Description Unit Qty Rate Amount (Rs)

1Supply , Filling and Spreading with approved red murrum soil supplied by contractor and spreading of the same in soft landsacpe areas with layers of 20 cms thickness in sequence and depths as specified by consultants consolidating each deposited layer be ramming and watering lead upto 50m as per design specification.Cumt 200

2 Supply and Filling with approved black garden soil and spreading

of the same in soft landsacpe areas with layers of 20 cms thickness in

sequence and depths as specified by consultants

Cumt 200.00

3 Supply and stacking of local sand (Grading zone iii or coarser) dump

manure (cowdung) on site along with stacking on site of Good earth

(Good earth supplied and already quantified ) including mixing earth,

sand and cowdung in proportion of 7: 2.5 : 0.5 (7 parts of good earth

to 2.5 parts of sand to 0.5 part of cowdung) or as directed by the

engineer incharge and then spreading over lawn areas as well as

filling in excavated pits, planters, flower beds etc in required thickness

as per specification or as directed by the engineer incharge and

carriage up to 200 m lead

Cumt 100.00

4 Supply and application of manure and fertilizer as per horticultural

specifications and as instructed by consultants on site.

a 1. Sampurna - 19:19:19 Kg 90.00

b 2. Urea Kg 90.00

c 3. Neem cake Kg 170.00

d 4. MOP - Murrete of Pottash) Kg 50.00

e 5. Micronuitrient +mix - Kg 40.00

5 Supply and Application of pesticides and insecticides as specifide by

consultant and as per horticultural specifications on site.

a chloropyrifos - 20% EC LIT 20.00

b Monocrotophos- 50% LIT 20.00

c Sevin Powder KG 20.00

6 Providing and applying Chemical weed control by means of spraying

of non-selective weedicide Paraquet dichloride 24 wsc gramoxore

from ICI Zeneca to entire lawn area as per specification with spraying

of wedicide for control - Of weeds in the garden premises ,

Glyphosphate - 41%SL - Litres 5.00

7 Treatment of lawn areas with insectisides, pesticides by application of

Lindane ( Zuari Agro Industries) and dithane -m-45 ( Bayer India Ltd)

as per manufacturere's recommendation or specification and anti

termite solution for lawn areas with chloropyriforos dust 1.5% atelast

3" to 5" below the surface of ground (intensity of dosage should be 1.5

kg per 100 sqm) as per specification or direction of the engineer

incharge

a Lindane Kg 50.00

b Dithane -m-45 Kg 50.00

c Chloropyriforos dust Kg 5.00

8 supply and Grassing with following types of grasses at 5 cms c/c by

dibbling process including watering and maintenance of the lawn for

12 months or more till the grass forms a thick lawn free from weeds

and free for mowing including spreading of oil cake. and making it well

compacted lawn paly field compatible for palying games like footabll

and so on.

bermuda -doob grass Sqmt 1000.00

SOFT LANDSCAPING WORK

ABSTRACT

9 Maintanance of all the soft landscape areas such as lawn trees

shrubs palms cycas ferns specimein plants bamboos ground

creepers/climbers etc as per horticultural specification excluding the

cost of water irrigation system such as flexible pipes pumps for a

period of 1 year from the date of issue of completion certificate by the

Engineer in charge and SWEEEPING OF LAWN AND REMOVAL OF

DEAD LEAVES on every day basis for 12 months as specified by

consultants and disposing of the same in rae as instructed on site.

inclusive of supply and application of horticultural garden impliments

such as Sqmt 1000.00

1. lawn mower

2. bush cutter

3. secatures

4. equipments such as Budding/grafting knife, hedge shear, garden

tools and rakes etc.

10 Supply and plantation of following types of healthy, decorative,

flowering plants, trees , hedges, land covers etc. Including their

maintenance up to 12 months as per specification and direction of the

consultants and also replacing with similar plants in case of death of

any plants. The plant will be selected and approved by consultants

before plantation.

a) TREES

Plumeria Alba- average heights range 13-15 feet tall Each 10.00

b) SHRUBS – SMALL

1) Bougainvillea sps variegated- Jamaica (red, orange) Each 50.00

2) Hibiscus Rosa Sienesis ( China Rose) Each 50.00

11 Supply and plantation of indoor healthy, decorative, flowering plants,

trees , land covers etc., as specified Including their maintenance up to

12 months as per specification and direction of the engineer in charge

and also replacing with similar plants in case of death of any plants.

The plant will be selected and approved by engineer in charge before

plantation. and teh same will have to planted in decorative ornamental

terrcotta and concrete pot container as specified.

a) INDOOR PLANTS SMALL Each 10.00

b) INDOOR PLANTS BIG Each 10.00

12 Landscape irigation system with Plumbing with Sprinklers (Details To

be given by Contractor on a separate sheet) JOB 1.00

Total Cost of Lanscaping Work (C)

(Rupees )

Total

ITEM Item Description Qty Unit Rate Amount Rate Amount Amount

No Rs Rs Rs Rs Rs

A) M.V.PANELS & DISTRIBUTION BOARDS

1

Supply & erecting triple pole and neutral VTPN Type

distribution board confirming to IS:13032 and double

door ,Surface /Flush mounted made of 18 SWG CRCA

sheet stove enamelled /powder coated for

incorporating 1 nos 4pole mcb as incomer and three

pole outgoing of 4 ways per phase and 100 A copper

busbar per phase of electrolytic grade , the db can be

concealed fitted in wall or mounted on M.S angle

frame. (locking arrangement required for incomer mccb

& cost of mccbs/rccbs/mcbs not to be considered.) IP54

1 Each

2 Supply & erecting triple pole and neutral PPI Type



sheet stove enamelled /powder coated for incorporating

1 nos 4pole mcb & 3nos DP RCCB as incomer and single



concealed fitted in wall or mounted on M.S angle frame.

(locking arrangement required for incomer mcb & cost

of mcbs/rccbs not to be considered.)IP54

1 Each

3 Supply & erecting triple pole and neutral PPI Type



sheet stove enamelled /powder coated for incorporating

1 nos 4pole mcb & 3nos DP RCCB as incomer and single



concealed fitted in wall or mounted on M.S angle frame.

(locking arrangement required for incomer mcb & cost

of mcbs/rccbs not to be considered.)IP54

2 Each

4 Supplying, erecting & marking MCB confirming to

IS:8828 of 1996, Single pole,6 to 32 Amps, B/C series,10

KA with required wiring connections and lugs, ferrules

etc in provided distribution board. 48 Each


IS:8828 of 1996, Four pole,40 Amps, B/C series,10 KA

with required wiring connections and lugs, ferrules etc in

provided distribution board. 3 Each


IS:8828 of 1996, Four pole,63 Amps, B/C series,10 KA

with required wiring connections and lugs, ferrules etc in

provided distribution board. 1 Each

7 Supplying, erecting & marking of 40 A 2 pole RCCB, 30

mA sensitivity and 30 milisec tripping time with inbuilt

test knob , trip free mechanism ,operating for rated

leakage current at nominal 10 V AC and also in neutral

open conidition and with rated short circuit withstand

capacity confirming to IS 12640 Complete with required

wiring connections and lugs, ferrules etc in provided

distribution board.

9 Each

8 Supplying and errecting 1 module mcb blanks. 10 Each

B) CABLES,CABLE TERMINATION,CABLE TRAYS:-

1 Supply & laying of XLPE insulated ,PVC sheated

,Stranded alluminium / solid copper,armoured Cable,1.1

KV grade (with ISI mark) laid in ready provided

trenches/ pipes and on cable trays in an approved

manner of following sizes.

a) 4 C X 35 sqmm AYXY . 145 r.m.

b) 4 C X 16 sqmm AYXY . 200 r.m.

ELECTRICAL WORK

ABSTRACT

Supply Installation

c) 4 C X 2.5 sqmm YWY . 1070 r.m.

2 Supply & termination of XLPE insulated ,PVC sheated

,Stranded alluminium / solid copper,armoured Cable

using double compression type brass cable glands and

long barreled alluminium/copper lugs.

a) 4 C X 35 sqmm AYXY . 2 r.m.

b) 4 C X 16 sqmm AYXY . 6 Each

c) 4 C X 2.5 sqmm YWY . 100 Each

c) 4 C X 2.5 sqmm YWY .(Single Compression type.) 10 Each

C) CONDUITING & WIRING (Lighting & Power)

1 Providing Circuit wiring using with ISI mark 2x1.5 sqmm

FRLS insulated copper conductor wires in 20 mm Heavy

gauge pvc pipe inclusive of all necessary accessories like

bends,tees,junction boxes, u clamps nails, binding wire

etc chisseled in wall or laid on ceiling / walls including

making grooves in wall and plastering using cement

mortar & finishing the surface to match the background

in an approved manner along with 1 run 1.5 sqmm FRLS

green coloured earth wire running end to end .

300 r.m.

2 Providing Circuit wiring using with ISI mark 2x2.5 sqmm

FRLS insulated copper conductor wires in 20 mm Heavy

gauge pvc pipe inclusive of all necessary accessories like

bends,tees,junction boxes, u clamps nails, binding wire

etc chisseled in wall or laid on ceiling / walls including

making grooves in wall and plastering using cement

mortar & finishing the surface to match the background

in an approved manner along with 1 run 2.5 sqmm FRLS

green coloured earth wire running end to end .

300 r.m.

3 Providing wiring for One way light,fan,bell point using

3x1.5 sqmm frls insulated 1.1kv grade ISI marked copper

conductor wires in heavy gauge rigid pvc pipe of 20 mm

dia with ISI mark with all necessary acessaries like deep

junction boxes,bends, inspection boxes,u nails,binding

wire etc concealed in slab during casting and walls by

making chases and plastering using cement mortar &

finishing the surface to match the background in an

approved manner and terminating the wires in

angle/batton holder /connectors including fixing of ball

socket and 19 mm dia,1" long nipple and G.I checknuts

etc if required on one side and on 6 A modular type

switch fixed on original nonmetallic flush box and

double cover plate at other end, complete with all above

material.

a) Primary short point 28 Each

b) Primary medium point 0 Each

c) Primary long point 0 Each

d) Secondary looping point ( looped from primary

points.) 39 Each

e)Fan point (along with modular 5 speed regulator fitted

in switch box.) 2 Each

f)Ex fan points ( along with 6 A 3 pin socket fixed at other

end.) 8 Each

4 Providing 6 A universal switch socket outlet using 6 A SP

one way switch along with 5 pin 6 A universal socket

fixed on 3 module double cover plate fixed to 3 moudule

unbreakable modular switch box duly erected flush to

wall with required chiselling the wall and plastering

using cement mortar & finishing the surface to match

the background in an approved manner ,complete with

all above material (wiring not included in this item).

14 Each

5 Providing 6/16 A switch socket outlet using 16 A SP one

way switch along with 6/16 A six pin socket fixed on 3

module double cover plate fixed to 3 moudule






10 Each

6 Providing 6/16 A switch socket outlet using 16 A dP one

way switch mounted seperately on 2 module double

cover plate fixed to 2 moudule unbreakable modular

switch box ,along with 6/16 A six pin socket fixed on 2

module double cover plate fixed to 2 moudule






RATE Each

D) EARTHING & LIGHTING PROTECTION SYSTEM

1 Providing Earthing using Pipe in Pipe technology earth

electrode along with necessary back fill compound

complete with excavation in soil , installation of earth

electrode and back fill compound , backfilling of soil and

providing masonary enclosure with cover plate having

locking arrangement and pvc pive sleeves for enty of

40x5 mm g.i earth grid etc complete as per IS: 3043

(similar to Ashlok Safe Earthing Type T-19 , lenght 3

mtrs).

4 Each

2 Providing 25 x 5 mm G.I strip.laid on walls using G.I

spacers and saddles of proper size or on cable

trays/ducts or in pre-excavated trenches including all

necessary jointing hardware etc. 200 r.m.

a) 6 sqmm FRLS insulated flexible copper wire (green)in

surface or recess for loop earthing. 30 r.m.

b) 4 sqmm FRLS insulated flexible copper wire (green)in


c) 2.5 sqmm FRLS insulated flexible copper wire (green)in


E) LIGHT FITTINGS

1 Supply and erection of 3W ARIAL DOWNLIGHT ( ROUND

RECESSED ), CODE NO LDL 211 OF PASOLITE MAKE .

16 Each

2 Supply and erection of 7W ALTO EXTRA SLIM PANEL (

RECESSED ), CODE NO LDL 047 - ROUND OF PASOLITE

MAKE . 7 Each

3 Supply and erection of 1X28W BOX TYPE TUBE LIGHT,

CODE NO 1910 OF PASOLITE MAKE . 25 Each

4 Supply and erection of 10W MARIA BOLLARDS -2Ft,

CODE NO B 10758 OF PASOLITE MAKE . 25 Each

5 Supply and erection of 5 W LED uplighters with spike

(Green colour) plus driver CODE NO LS1229 OF PASOLITE

MAKE . 15 Each

6 Supply and erection of EXHAUST FANS ( 9 Inches ) 10 Each

F) EXCAVATION & M.STEEL

1 Excavation of trench (for L.T cables) in hard soft soil

800mm deep and width 400 mm and providing 30 cm

sand bedding, laying of 1 layers of stone tiles, 25mm

thick, 300mm wide and 600mm length, sand cushioning

and backfilling etc. 1150 r.m.

2 Excavation of trench (for earthing strip) in soft soil

400mm deep and width 200 mm and backfilling etc.

200 r.m.

G) JUNCTION BOXES

1 Providing Hensel make thermoplastic weather proof

junction box code no 8040 for outdoor duty along with 4

sqmm 5 way connectors code no DKL04, fitted in the box

, IP65. fitted on wall surface or concealed in wall as

called for. (rate should include all necessary hardware,

chiselling the wall and plastering using cement mortar &

finishing the surface to match the background in an

approved manner ,complete with all above material.)

40 Each

TOTAL

Rupees

renovation of laran lawns, the international centre goa ...renovation of laran lawns, the...

Documents