renewable energy division - thesan s.p.a. · trenewable energy division ... over europe, south...

1GENERAL CATALOGUE

April 2014

Renewable Energy

D I V I S I O N

Mounting System

2 Bucsani - Romania - Photovoltaic power plant 1,99 MWp

3

Thesan S.p.A.

Thesan around the world

Renewable Energy Division

Thesan Mounting System Presentation

Innovation, quality, warranty and certificates

Structural controls

Flat roof solutions “Azimuth 0” System

“Est-Ovest” System

“Triangle” System

Flat roofing accessories

Sloped roof solutions “Universal” System with brackets, for tiles and Roman tiles

“Universal” System with double-threaded screws

“Universal” System with anchoring base for corrugated sheet roofs

“Universal Light” System with locking brackets

“Plan” System with structural tape for corrugated sheet roofs

“Little Plan” System with EPDM tape for corrugated sheet roofs

Slooped roofing Accessories

Ground system solutions Single pole support system

Double pole support system

Supports

Ground system accessories

Photovoltaic shelter solutions

Mounting System accessories Fixing clamps

Accessories

Plugs

Cable locks and cable lock ducts

Screws and accessories

The Muse in Trento

Hemera Presentation

Complete insulated photovoltaic roofing system

Accessories

04

05

06

11

12

14

19

19

19

20

22

22

22

23

23

23

24

39

40

42

44

46

48

54

55

56

57

62

65

66

68

Index

Index

4 Thesan S.p.A.

In 2012, Thesan Group reached a turnover of € 85 million, thanks to the collaboration of 450 employees

and to the research and development of new products and innovative solutions.

The high investments in research and development, which allow Savio to launch into the markets

new products with high technological and design components, are the inherent characteristics of

Savio Group, which invests 4 million every, 3,5 times more if compared to the average in the sector.

Thesan S.p.A.

Thesan S.p.A. was founded in 2008 with the mission of designing, realising and offering highly innovative

and technological solutions in the fi eld of renewable energy and green building.

Thesan’s activity is carried out through two business units:

Renewable energy

Energy saving

Thesan’s development originates from an idea of Savio’s Group, founded in 1889 and worldwide leader

for aluminium frames components, basing its success upon the quality of products and the innovative

technical, aesthetical and functional contents.

5Thesan around the world

Strength of Savio’s network:

Chiusa San Michele (TO)headquarter

and production factory

Sant’Antonino di Susa (TO)production factory

Avigliana (TO)production factory

Thesan operates worldwide thanks to its direct presence in many high potential countries and to the

synergies deriving from Savio’s international network.

Thesan around the world.

Headquarter and main factories.

6

Renewable Energy is Thesan’s division dedicated to business development in the renewable

Energy Field.


Renewable Energy Division.

Value ProjectsThesan operates worldwide in the development and realisation of power plants for the production

of renewable energy. The activity mainly focuses on the realisation of photovoltaic and hydroelectric

power plants in those markets offering high returns on investments, even without significant incentive

systems.

Thesan has the adequate competences to follow all the phases of the production chain, from

the project development to the construction, management and maintenance of the power plant.

The production chain activities can be summarized as follows:

1) Project Development

Drawing on its expertise in the design of steel and aluminum structures, acquired during the 125

years of activity of Savio Group and thanks to a team of over 40 engineers, Thesan is able to

satisfy any requirement for the construction of photovoltaic power plants at any altitude and with

any specific fixing requirements.

2) Construction

In addition to offering support and advice in the assembly of its structures, the design of which also

takes into account an optimization of the construction and maintenance costs, Thesan also offers Turn

Key EPC (Engineering, Procurement and Construction) services.

G R E E N F I E L D B R O W N F I E L D

PROJECT DEVELOPMENT CONSTRUCTION OPERATION

Rights acquisition

Engineering

Permitting

EPC

Equity financing

Construction Debt Financing

Long term financing

O&M contracting

Asset Management

7

Both for its investments, that allow Thesan to increase its portfolio of green energy production, and

for its activities as General Contractor as Turn Key EPC, Thesan takes upon itself the development,

operational and financial risk linked to the realisation of the projects.

For a part of its investments, there is the aim of ceasing the project within 12-18 months to investors

that are not willing to take upon themselves the risks of development and construction.

3) Operation

Thesan’s investments are financed through leasing contracts or medium/long-term project finance.

Thesan can create added value in the operation phase thanks to the daily management of the asset

and to the choice of O&M contractor leader in the sector.


8 Renewable Energy Division

Serra dei Conti (AN)

2 PV Plants:

0,912 MWp

0,670 MWp

Ripatransone (AP)

1 PV Plant: 0,991 MWp

Amatrice (RI)


Redea

4 PV Plants: 3,99 MWp

Montedinove (AP)

3 PV Plants:

0,991 MWp

0,974 MWp

0,867 MWp

Bucsani:


Produlesti


Main investments in Italy.

Romania.

Investments in 2012

and in 2013

9

Fortaleza

1 PV Plant:

20,00 MWp

Salvador de Bahia

1 PV Plant:

1,00 MWp


Brazil.

Completed projects

Ongoing projects

Ongoing projects in 2014

Çumra

2 PV Plants:

2,00 MWp

Turkey.

10 San Savino- Ripatransone (AP) Photovoltaic power plant - 0,991 MWp

11Thesan Mounting System

A full range of mounting systems, standing out for

the use of excellent materials, for the refined design,

for the complete compatibility between components

and above all for the incomparable easy application.

TMS helps you to save time.Time to dedicate to new energies.

Design, production and distribution of complete

mounting systems for the realization of retail and

industrial power plants.

Thanks to its know-how, acquired in 125 years of

experience, Savio has transmitted to Thesan the

necessary competences to excel in the design and

production of complete mounting systems both from

qualitative and technical point of view.

Having a network of sales agents and distributors all

over Europe, South America, India and China, Thesan’s

mounting systems are characterized by quality and

reliability developed thanks to the entirely Italian design

and technology.

Thesan is in charge of the installation of its mounting

systems for the realization of industrial photovoltaic

power plants.

12

Around You is a full range of aluminium and steel mounting

systems that combines Savio’s Know-how to Thesan’s

design expertise.

Innovative solutions.

In addition to the solutions proposed in the

catalogue, Thesan offers a range of completely

customized products and systems to suit every

need of its customers.

Customization.

An easy and intuitive calculation software,

especially designed to allow our clients to size

photovoltaic power plants on all types

of roofs, optimizing the work.

Mounting Systemconfigurator.

The two key levers to improve

the quality of products.

TMS constantly evolving.

Research and development.

Innovation, quality, warranty and certifi cates

Snow load areaskN/m

1,51,00,6

13

High standards of quality for every single component.

The attention paid to every single detail ensures not only an

incomparable constructive ease and speed of assembly,

but also the maximum safety in every phase

of assembly and maintenance.

We use high-quality materials as aluminium EN-AW-6063,

stainless steels and reinforced technopolymers with fi berglass

to guarantee a long lasting mounting system.

The well-established quality of our systems

and of our simple and easy to use materials

offers confidence and reliability to our clients.

For this reason, we grant a 12-year warranty

for all our products against any manufacturing

or material defects.

Warranty.

Quality, ease and speed

in assembly.

Innovation, quality, warranty and certifi cates

ISO 9001 and 14001 compliance certifi cate.

TÜV Rheinland AG has certified Thesan on the

basis of the criteria established by ISO 9001:2008

compliance certifi cate, regarding development,

production and sale of assembly systems for solar

technology.

Pending

TÜV compliance certifi cate.

The group TÜV Rheinland is in charge of controlling

a standard range of products on the basis of

adequate criteria.

Savio’s certificate

Compliance certificates.

57%

Assembly times

reduced by

ti

14 Structural controls

Through certifi ed FEM codes (NASTRAN/Optistruct®) Thesan performs structural controls and projects,

both linear and non-linear in compliance with the Eurocodes and in compliance with the regulations of

the country where the plant is mounted.

In particular:

- EN1990 – Eurocode - Basis of structural design

- EN1991 – Actions on structures

- EN1993-1-1 – Design of steel structures - General rules and rules for buildings

- EN1993-1-3 – Design of steel structures - Supplementary rules for cold-formed members and sheeting

- EN1993-1-8 – Design of steel structures - Design of joints

- EN1999-1-1 – Design of aluminium structures - General structural rules

Structural controls.

15Structural controls

Double pole stress–strain analysis through FEM method

Single pole stress–strain analysis through FEM method

17Thesan Mounting System

Roof solutions

18 Photovoltaic Power Plant - Brasilia (Brazil) – 0,01 MWp

19

“Triangle” SystemFeatures:

Triangles with different tilt angles in order to guarantee the best solution in any condition

Suitability:

Flat surfaces, such as roofs and terraces, with any type of roof coverage (bituminous sheets, gravel, cement or metal sheet).Adjustable for facades and sunscreens.

“Azimuth 0” SystemFeatures:

Modularity and minimization of the components for a fast and easy assembly

Suitable for a low lift roof, thanks to the minimal weight

of ballasts

Maximum height less than 30 cm for fixing on roofs with or without parapet

Windbreak spoiler to optimize aerodynamics and reduce ballasts

Suitability:

Flat surfaces, such as roofs and terraces, with any type of roof coverage (bituminous sheets, gravel, cement or metal sheet).

“East-West” SystemFeatures:

Modularity and minimization of the components for a fast and easy assembly

suitable for a low lift roof, thanks to the minimal weight of ballasts

Maximum height less than 30 cm for fixing on roofs with or without parapet

Suitability:

Flat surfaces, such as roofs and terraces, with any type of roof coverage (bituminous sheets, gravel, cement or metal sheet).

Flat roof solutions

Flat roof Solutions

20 Flat roofing accessories

Flat roofing accessories

10° central supportfor Azimuth 0 system Material: 6060 aluminium alloy, or equivalent

ITEMSO-AY055-00TH

DESCRIPTIONAZ0 central support

Central supportfor East-West system Material: 6060 aluminium alloy, or equivalent

ITEMSO-AY056-00TH

DESCRIPTIONEO central support

Windbreakfor Azimuth 0 system Material: galvanized steel

ITEMSO-AY058-00TH

DESCRIPTIONAZ0 windbreak

Middle clamp, rough, for East-West system Material: 6060 aluminium alloy, or equivalent

35-38 mm frame modules - M8x30 hammer head screws39-44 mm frame modules - M8x36 hammer head screws45-50 mm frame modules - M8x42 hammer head screws

ITEMSO-AY059-00TH

DESCRIPTIONEO middle clamp

21Flat roofing accessories

Triangle Material: 6060 aluminium alloy, or equivalent

Customized triangles realized according to the specific project

10° terminal support,for Azimuth 0 and East-West systems Material: 6060 aluminium alloy, or equivalent

ITEMSO-AYP09L015-0000SO-AYP09L048-0000SO-AYP09L090-0000

DESCRIPTIONLenght 150 mmLenght 475 mmLenght 900 mm

Support stand for middle clamp, roughfor East-West support Material: 6060 aluminium alloy, or equivalent

ITEMSO-AY060-00TH

DESCRIPTIONEO middle clamp support

22 Sloped roofs solutions

Sloped roof solution

“Universal” system with brackets,for tiles and Roman tilesFeatures:

Full range of fixing brackets suitable with any kind of tile or Roman tile

Suitability:

Sloped roofs with tiles, Roman tiles, slate and any kind of roof coverage.

“Universal” system with double threaded screwsFeatures:

any kind of roof structure (iron, steel, concrete)

use of electric screwdriver quick assembly of screws

Water penetration resistance warranty thanks to the EPDM seal included in the screws

Suitability:

Sloped roofs with different roof coverage (corrugated sheet, fi ber cement sheets, cement tiles, bituminous sheets).

“Universal” System with anchoring base, for corrugated sheet metal roofFeatures:

the power plant reaches its end-of-life, keeping the waterproofing shingle

60% less roof holes for anchoring the structures, compared to our main competitors

Higher mechanical resistance thanks to use of structural tape

Suitability:

Sloped roofs with corrugated sheet metal roof coverage.

23Sloped roofs solutions

“Universal Light” System with anchoring baseFeatures:

when the power plant reaches its end-of-life, keeping the waterproofing shingle


Quick assembly thanks to the use of fixing plates to be fixed on the rail side

Suitability:


“Plan” System with structural tape for corrugated sheet roofsFeatures:

the structures, compared to our main competitors


Suitability:


Little Plan” with EPDM tape for corrugated sheet roofsFeatures:

and practical

Suitability:


24 Mounting rails for sloped roofs

Mounting rails for sloped roofs

Universal rail Material: 6063 aluminium alloy, or equivalent

Rail height: 40 mm – Rail width: 40 mm Weight: 0,97 Kg/m

Use hammer head screws M8 in the upper grooveUse allen head screws M8 in the lower groove

ITEMSO-AYP12L3-0000SO-AYP12L6-0000

DESCRIPTIONUniversal rail of 3,10 mUniversal rail of 6,20 m

Universal Medium rail Material: 6063 aluminium alloy, or equivalent



ITEMSO-AYP11L6-0000

DESCRIPTIONUniversal Medium rail of 6,20 m

Universal Light rail Material: 6063 aluminium alloy, or equivalent


Use hammer head screws M8 in the upper groove

High rail Material: 6063 aluminium alloy, or equivalent





DESCRIPTIONUniversal Light rail of 3,10 mUniversal Light rail of 6,20 m

DESCRIPTIONHigh rail of 3,10 mHigh rail of 6,20 m

25Mounting rails for sloped roofs

Plan rail Material: 6063 aluminium alloy, or equivalent

Rail height: 22,5 mm – Rail width: 88 mm Weight: 1,00Kg/m

To be used for corrugated sheet roofs, fixing with screws or rivetsUse hammer head screws M8 in the upper groove


DESCRIPTIONPlan rail of 3,10mPlan rail of 6,20m

Little Plan Light ral Material: 6063 aluminium alloy, or equivalent

Rail height: 12,5 mm – Rail width: 55 mm

Weight: 0,48 Kg/m.


ITEMSO-AYP10L040-0000

DESCRIPTIONLittle Plan Light rail of 0,40 m

Little Plan rail Material: 6063 aluminium alloy, or equivalent

Rail height: 22,5 mm – Rail width: 88 mm Weight: 1,00Kg/m


ITEMSO-AYP14L05-0000

DESCRIPTIONLittle Plan rail of 0,50 m

26 Junctions for sloped roofs

Junctions for sloped roofs

Internal junction for Universal rail Material: 6060 aluminium alloy, or equivalent

Lenght: 200 mm

ITEMSO-AY003-0000

DESCRIPTIONUniversal internal junction

Internal junction for Plan rail Material: 6060 aluminium alloy, or equivalent

Lenght: 200 mm

ITEMSO-AY011-0000

DESCRIPTIONPlan internal junction

External junction for Universal rail Material: 6060 aluminium alloy, or equivalent

Lenght: 200 mm, stainless steel screws included (Allen head screws M8x16, flat washers and nuts M8)

ITEMSO-AY004-0000

DESCRIPTIONUniversal external junction

Internal junction for Universal Medium rail Material: 6060 aluminium alloy, or equivalent

Lenght: 200 mm

ITEMSO-AY088-00TH

DESCRIPTIONUniversal Medium internal junction

28 Mounting rails for custom applications

Mounting rails for custom applications

Strong rail Material: 6063 aluminium alloy, or equivalent

To be used for custom applications


se hammer head screws M8 in the upper grooveUse allen head screws M10 in the lower groove

ITEMSO-AYP16L6-0000

DESCRIPTIONStrong rail of 6,20 m

Medium rail Material: 6063 aluminium alloy, or equivalent

To be used for custom applications



ITEMSO-AYP15L6-0000

DESCRIPTIONMedium rail of 6,20 m

29Junctions for custom applications

Internal junction for Strong rail Material: 6060 aluminium alloy, or equivalent

Lenght: 387 mm

ITEMSO-AY014-0000

DESCRIPTIONStrong internal junction

Internal junction for Medium rail Material: 6060 aluminium alloy, or equivalent

Lenght: 387 mm

ITEMSO-AY013-0000

DESCRIPTIONMedium internal junction

External junction for Medium rail Material: 6060 aluminium alloy, or equivalent


ITEMSO-AY016-0000

DESCRIPTIONMedium external junction

External junction for Strong rail Material: 6060 aluminium alloy, or equivalent


ITEMSO-AY017-0000

DESCRIPTIONStrong external junction

Junctions for custom applications

30 Brackets for sloped roofs

Brackets for sloped roof

Bracket for standard tiles, fixed Material: AISI430

Minimum height 49 mm Total height 134 mm

ITEMSO-AY027-0000

DESCRIPTIONBracket for standard tiles, fixed

Bracket for tiles, with 1 adjustment Material: AISI430

Adjustment A height from 59 to 92 mm Total height from 110 to 143 mm

ITEMSO-AY028-0000

DESCRIPTIONBracket for tiles, 1 adjustment

Bracket for tiles, with 2 adjustmentsMaterial: AISI430

Adjustment A height from 70 to 90 mm Adjustment B height from 52 to 66 mm Total height from 125 to 160 mm

ITEMSO-AY029-0000

DESCRIPTIONBracket for tiles, 2 adjustments

Bracket for tiles, with 3 adjustments Material: AISI430

Adjustment A height from 82 to 106 mm Adjustment B height from 53 to 66 mm Adjustment C height from 81 to 151 mm Total height from 139 to 183 mm

ITEMSO-AY050-0000

DESCRIPTIONBracket for tiles, 3 adjustments

A

A

B

A

B

C

31Brackets for sloped roofs

Bracket for Portuguese tiles, fixed Material: AISI430


ITEMSO-AY030-0000

DESCRIPTIONBracket for Portuguese tiles, fixed

Bracket for slate slabs, fixed Material: AISI430

Total height 72 mm

ITEMSO-AY033-0000

DESCRIPTIONBracket for slate slabs, fixed

Bracket for flat tiles, fixed Material: AISI430


ITEMSO-AY034-0000

DESCRIPTIONBracket fot flat tiles,fixed

Bracket with hole for tiles, fixed Material: AISI430

Minimum height 47 mm Maximum height 132 mm

ITEMSO-AY041-0000

DESCRIPTIONBracket with hole for tiles, fixed

32 Brackets for sloped roofs

Brackets for sloped roof

Bracket for Roman tiles, 1 adjustment Material: AISI430

Adjustment B height from 108 to 140 mm Total height from 143 to 176 mm

ITEMSO-AY042-0000

DESCRIPTIONBracket for Roman tiles, 1 adj

B

Clamp for standing seam metal roofs Material: AISI430

ITEMSO-AY035-0000

DESCRIPTIONStanding seam metal roofs

Bracket for Roman tiles, 1 adjustment for horizontal purlins Material: AISI430


ITEMSO-AY031-0000

DESCRIPTIONBracket for Roman tiles, 1 adj, horiz

B

Bracket for Roman tiles, 1 adjustment for vertical purlins Material: AISI430


ITEMSO-AY032-0000

DESCRIPTIONBracket for Roman tiles, 1 adj, vert

B

33

Fixing screws for sloped roofs

Fixing screws for sloped roofs

Double-threaded fi xing screws,for wood or concrete substructureSuitable for corrugated sheet, fiber cement sheet, fiber cement tile

Adjustment plate 82x40x5 mm included.

Seal included.

ITEMSOST-S202-00THSOST-S201-00THSOST-S205-00THSOST-S208-00THSOST-S206-00THSOST-S203-00THSOST-S207-00THSOST-S204-00TH

DESCRIPTIONM10 x 180M10 x 200M10 x 250M12 x 200M12 x 250M12 x 300M12 x 350M12 x 400

L180

200

250

200

250

300

350

400

LM85

85

85

100

100

150

195

220

LH67

67

67

80

100

100

100

100

SWSW7

SW7

SW7

SW9

SW9

SW9

SW9

SW9

Double-threaded fi xing screws, for metal substructureSuitable for corrugated sheet, fi ber cement sheet, fi ber cement tile,

cement tiles roofs.

Seal included.

ITEMSOST-S211-00THSOST-S210-00THSOST-S209-00TH

DESCRIPTIONdiameter 8diameter 8diameter 8

L80

125

160

LM50

50

50

LH136

181

216

SWSW5

SW5

SW5

ITEMSOST-C201-00TH SOST-C201-00SPSOST-C202-00SP

DESCRIPTIONPlate 80x30x5 - hole 11 mm, slot 11 mmPlate 82x40x5 - hole 11 mm, slot 11 mmPlate 82x40x5 - hole 13 mm, slot 11 mm

Adjustment plate Material: steel

To be fi xed with double-threaded fi xing screws

34 Accessories for sloped roofs

Locking bracket for Universal rail

Material: 6060 Aluminium alloy

To be used in combination with Univeral rail

Width : 20 mmLenght: 45 mmWith slot of 8,5 mm

ITEMSO-AY036-0000

DESCRIPTIONLocking bracket 20 Universal

Locking bracket for Universal Light rail

Material: 6060 Aluminium alloy To be used in combination with Univeral Light rail

Width: 20 mmLenght: 45 mmWith slot of 6,5 mm

ITEMSO-AY036-0001

DESCRIPTIONLocking bracket 20 Universal Light

ITEMSO-AY007-0000

DESCRIPTIONLocking bracket 50 Medium/Strong

Locking bracket for Medium and Strong rail

Material: 6060 Aluminium alloy To be used in combination with Medium and Strong rail

Width: 50 mmLenght: 46,5 mmWith slot of 8,5 mm

Locking bracket for Universal rail

Material: 6060 Aluminium alloy

To be used in combination with Univeral rail

Width: 50 mmLenght: 45 mmWith slot of 8,5 mm

ITEMSO-AY006-0000

DESCRIPTIONLocking bracket 50 Universal

Accessories for sloped roofs

35Accessories for sloped roofs

ITEMSO-AY012-0000

DESCRIPTIONAnchoring base set

Pre-assembled anchoring base set

Material: 6060 Aluminium alloy To be used in combination with Univeral rail on corrugated sheet

Width: 25 mm, Lenght: 120 mm

To be fixed using self-drilling screws with seal

Locking bracket SO-AY036-0000, M6x16 allen screw, nut and adhesive and structural tape included

Anchoring base

Material: 6060 Aluminium alloy To be used in combination with Univeral rail on corrugated sheet

Width: 25 mm, Lenght: 120 mm

To be fixed using self-drilling screws with seal

M6x16 allen screw and adhesive and structural tape included

ITEMSO-AY022-0000

DESCRIPTIONAnchoring base

36 Cluj Napoca - (Romania) Photovoltaic power plant - 5 MWp

37Ground system solutions

Ground systemsolutions

38 Montedinove (AP) – Photovoltaic Power plants area 1 and 7 - 0,993 e 0,974 MWp

39

Ground system solutions


Single Pole support system,

array 1x6


array 3x4

Features:

Adjustable tilt angle, available upon request, to meet all requirements

Assembly of any type of module with or without frame

ADJUSTABLE

ADJUSTABLE

ADJUSTABLE


array 2x6

40


Double Pole support system,

array 2x6


array 3x6


Features:

Configurable modularity, on request, to meet all requirements


41


array 3x4


array 4x4


42 Support for ground system solutions

Supports for ground system solutions

Single Pole Material: S355 hot dip galvanized or equivalent

Single Pole with Ω rails to be fi xed in the ground, upper current top,cap, strut and hot dip galvanized steel screws included

Adjustable tilt angle in 3 or more positions

The dimensions of the pole are defi ned according to the specifi c project to be realized.

Double Pole Material: S355 hot dip galvanized or equivalent

Double Pole with Ω rails to be fi xed in the ground, upper current top, cap, strut and hot dip galvanized steel screws included

Fixed tilt angle

The dimensions of the pole are defi ned according to the specifi c project to be realized.

43Caracal Sest - Romania –Photovoltaic power plant - 0,996 MWp

44 Mounting rails for ground system solutions

Mounting rails for ground system solutions

Open LandFor portrait modules assembly

Material: 6063 aluminium alloy, or equivalent

Height: 105 mm - Width: 63 mm - Weight: 1,75 Kg/m


ITEMSOST-P358Lxxx-00THSOST-P362Lxxx-00TH

DESCRIPTIONOpen Land - customized lenghtOpen Land V01 - customized lenght

Open LandFor both portrait or landscape modules assembly




ITEMSOST-P361Lxxx-00TH

DESCRIPTIONOpen Land V02 - customized lenght

Internal junctionfor Open Land rails V01, V02, V03 Material: 6063 aluminium alloy, or equivalent

Lenght: 400 mm

ITEMSOST-ST033-00TH

DESCRIPTIONInternal junction Open Land V01, V02, V03

Open Land StrongFor both portrait or landscape modules assembly




ITEMSOST-P367Lxxx-00TH

DESCRIPTIONOpen Land V03 - customized lenght

45Caracal sedum - Romania – Photovoltaic power plant- 0,996 MWp

46


ShelterFeatures:

Fix tilt angle, on request, to meet all requirements



47Accessories

Accessories

48 Fixing clamps for modules with frame

Middle fixing clamp, rough Material: Aluminium, alloy 6060 or equivalent

Modules with frame from 35 to 38 mm - Hammer head screw M8x30Modules with frame from 39 to 44 mm - Hammer head screw M8x36Modules with frame from 45 to 50 mm - Hammer head screw M8x42

Clamp width 25 mm

ITEMSO-AY025-0000

DESCRIPTIONMiddle clamp, rough

Middle fixing clamp, black Material: Aluminium, alloy 6060 or equivalent, black oxidized

Modules with frame from 35 to 38 mm - Hammer head screw M8x30Modules with frame from 39 to 44 mm - Hammer head screw M8x36Modules with frame from 45 to 50 mm - Hammer head screw M8x42

Clamp width 25 mm

ITEMSO-AY025-1300

DESCRIPTIONMiddle clamp, black

Final fixing clamp, rough Material: Aluminium, alloy 6060 or equivalent

To be used in combination with hammer head screw M8x36

Clamp width 25 mm

ITEMSO-AY026-0000SO-AY026-0001SO-AY026-0002SO-AY026-0003SO-AY026-0004SO-AY026-0005

DESCRIPTIONFinal clamp, rough, module h35mmFinal clamp, rough, module h38mmFinal clamp, rough, module h40mmFinal clamp, rough, module h42mmFinal clamp, rough, module h46mmFinal clamp, rough, module h50mm

Fixing clampsfor modules with frame

Final fixing clamp, black Material: Aluminium, alloy 6060 or equivalent, black oxidized

To be used in combination with hammer head screw M8x36Clamp width 25 mm


DESCRIPTIONFinal clamp, black, module h35mmFinal clamp, black, module h38mmFinal clamp, black, module h40mmFinal clamp, black, module h42mmFinal clamp, black, module h46mmFinal clamp, black, module h50mm

49Pre-assembled fixing clamps for modules with frame

Middle fixing clamp set, rough Material: Aluminium, alloy 6060 or equivalent

Hammer head screw, spring and nut included

With anti-theft washer:

ITEMSO-AY048-0000SO-AY048-0001SO-AY048-0002

SO-AY063-0000SO-AY065-0000

DESCRIPTIONMiddle clamp rough module h35-38mmMiddle clamp rough module h39-44mmMiddle clamp rough module h45-50mm

Middle clamp rough module h35-38mmMiddle clamp rough module h40-42mm

Middle fixing clamp set, black Material: Aluminium, alloy 6060 or equivalent, black oxidized


ITEMSO-AY048-1300SO-AY048-1301SO-AY048-1302

DESCRIPTIONMiddle clamp, black,module h35-38mmMiddle clamp, black,module h39-44mmMiddle clamp, black,module h45-50mm

Final fixing clamp set, rough Material: Aluminium, alloy 6060 or equivalent



With anti-theft washer:SO-AY064-0000SO-AY066-0000

Final clamp, rough, module h35mmFinal clamp, rough, module h40mm




Final fixing clamp set, black Material: Aluminium, alloy 6060 or equivalent, black oxidized


Clamp width 25 mm

Clamp width 25 mm

Clamp width 25 mm

Clamp width 25 mm

Pre-assembled fixing clampsfor modules with frame

50 Pre-assembled fixing clamps for modules without frame


Hammer head screw, spring, nut and seals included

Locking thickness from 7 to 11 mmOverlay 12 mmLenght 200 mm

ITEMSO-AY001-0003

DESCRIPTIONMiddle clamp, rough, 7-11 L200




ITEMSO-AY001-1303

DESCRIPTIONMiddle clamp, black, 7-11 L200




ITEMSO-AY002-0003

ITEMSO-AY002-1303

DESCRIPTIONFinal clamp, rough, 7-11 L200

DESCRIPTIONFinal clamp, black, 7-11 L200




Pre-assembled fixing clampsfor modules without frame

Range of Clamps range certified by:

51Pre-assembled fixing clamps for modules without frame



Locking thickness from 6,5 to 11 mmOverlay 15 mm

ITEMSO-AY001-0002

DESCRIPTIONMiddle clamp, rough, 6,5-11




ITEMSO-AY001-1302

DESCRIPTIONMiddle clamp, black, 6,5-11




ITEMSO-AY002-0002

ITEMSO-AY002-1302

DESCRIPTIONFinal clamp, rough, 6,5-11

DESCRIPTIONFinal clamp, black, 6,5-11





52 Pre-assembled fixing clamps for modules without frame



Locking thickness from 7 to 11 mmOverlay 12 mm

ITEMSO-AY001-0001

DESCRIPTIONMiddle clamp, rough, 7-11




ITEMSO-AY001-1301

DESCRIPTIONFinal clamp, black, 7-11




ITEMSO-AY002-0001

ITEMSO-AY002-1301

DESCRIPTIONMiddle clamp, rough, 7-11

DESCRIPTIONFinal clamp, black, 7-11




Pre-assembled fixing clampsfor modules without frame


53Pre-assembled fixing clamps for modules without frame




ITEMSO-AY001-0000





ITEMSO-AY001-1300





ITEMSO-AY002-0000

ITEMSO-AY002-1300






54 Accessories

Anti-theft washer Material: Stainless steel

ITEMSO-AY046-0000

DESCRIPTIONAnti-theft washer

ITEMSO-AY087-00TH

DESCRIPTIONSliding anchor

Sliding anchorfor hammer head screw, M8 and M10 Material: polypropylene plastic

It keeps the hammer head screw in place, facilitating the assembly

Accessories

Safety hook Material: Reinforced Technopolymer, black color

To be used in combination with modules without frame

ITEMSO-AY005-8500

DESCRIPTIONSafety hook

Rubber support Material: EPDM, black color

To be used in combination with modules without frame

Width : 40 mm Lenght: 40 mm

ITEMSO-AY015-8500

DESCRIPTIONRubber support

55Plugs

Plug for Universal rail Material: plastic PA6, grey color

ITEMSO-AY010-8300

DESCRIPTIONPlug for Universal

Plug for Medium rail Material: plastic PA6, grey color

ITEMSO-AY023-8300

DESCRIPTIONPlug for Medium

Plug for Strong rail Material: plastic PA6, grey color

ITEMSO-AY024-8300

ITEMSO-AY051-83TH

DESCRIPTIONPlug for Strong

DESCRIPTIONPlug for Open Land

Plug for Open Land rail Material: plastic PA6, grey color

Plugs

56 Cable locks and cable lock ducts

Cable lock for Universal rail Material: plastic PA6, grey color

Width : 30 mm

ITEMSO-AY009-8300

DESCRIPTIONCable lock for Universal

Cable lock with rings for Universal railMaterial: plastic PA6, grey color

With ringsWidth: 30 mm

ITEMSO-AY040-8300

DESCRIPTIONCable lock rings for Universal

Cable lock duct for Medium railMaterial: plastic PVC, grey color

Lenght: 3 m

ITEMSO-AY037-8300

ITEMSO-AY038-8300

DESCRIPTIONCable lock duct 3m for Medium

DESCRIPTIONCable lock duct 3m for Strong

Cable lock duct for Strong railMaterial: plastic PVC, grey color

Lenght: 3 m

Cable locks and cable lock ducts

57Screws and accessories

Hammer head screw M8, full thread Material: stainless steel

ITEMSOST-V209-00THSOST-V206-00THSOST-V210-00TH

DESCRIPTION

Hammer head screw M8x30Hammer head screw M8x36Hammer head screw M8x42

Allen head srew, full threadAllen head screw DIN933

Material: stainless steel

ITEM0042-68315-00000042-68320-00000042-68325-00000042-68330-00000042-68502-0000

DESCRIPTION

Allen head screw M8x20Allen head screw M8x25Allen head screw M8x30Allen head screw M8x35Allen head screw M10x25

Allen head srew, partial threadAllen head screw DIN931

Material: galvanized steel

ITEM0041-69900-61000041-69904-6100

DESCRIPTIONAllen head screw M14x80Allen head screw M14x90


Self-drilling screw for woodSelf-drilling wood screw

Material: stainless steel A2, partial thread

Flat-head (Topix) and Hexalobular socket (Torx)

ITEM0042-90400-00000042-90401-00000042-90530-00000042-90540-00000042-90550-00000042-90560-00000042-90580-0000

DESCRIPTIONWood screw dia. 6x60Wood screw dia. 6x80Wood screw dia. 8x60Wood screw dia. 8x80Wood screw dia. 8x100Wood screw dia. 8x120Wood screw dia. 8x160

L60806080100120160

B36425072808080

dk15151919191919

TXTX25TX25TX40TX40TX40TX40TX40

58 Screws and accessories

Nut with safety fitNut with safety fit DIN6923


ITEM0042-80500-00000042-80700-0000

DESCRIPTIONNut with safety fit M8Nut with safety fit M10

Self-locking nutSelf-locking nut, UNI-7473-DIN982

ITEM0042-78702-00000041-78900-6100

DESCRIPTIONLocking nut M10, stainless steelLocking nut M14, galvanized steel

Self-locking nut with safety fit

Self-locking nut with safety fit, DIN6926


ITEM0042-82500-00000042-82600-0000

DESCRIPTIONLocking nut with safety fit M8Locking nut with safety fit M10


ITEM0042-76500-0000

DESCRIPTIONStandard nut M8

Standard nutStandard nut DIN934



WasherWasher for allen head screw UNI6592


For M14 - internal diameter 15 mm, external diameter 28 mm

ITEM0041-91900-6100

DESCRIPTIONWasher M14

Toothed washerExternal tooth washers for allen head screw UNI8842A


For M14 - internal diameter 14,5 mm, external diameter 24 mm

ITEM0041-93900-6100

DESCRIPTIONToothed washer M14

ITEMSOST-V228-00SPSOST-V229-00SPSOST-V230-00SP

DESCRIPTIONWatertight rivet diam. 4,8x10Watertight rivet diam. 4,8x16Watertight rivet diam. 6,4x20

Watertight rivetWatertight rivet

Material: stainless steel A2

ITEM0042-91502-00000042-91501-0000

DESCRIPTIONLarge washer M8Large washer M10

Large washerLarge washer UNI6593


For M8 – internal diameter 8,4 mm, external diameter 24 mm

For M10 – internal diameter 10,5 mm, external diameter 30 mm

60 Screws and accessories

Self-drilling screw with sealSelf-drilling screw with seal


Allen head SW8

ITEM0042-31400-00000042-31401-0000

DESCRIPTIONSelf-drilling screw with seal 5,5x25Self-drilling screw with seal 5,5x35

ITEM0042-31305-0000

DESCRIPTIONSelf-drilling screw diam. 5,5x19

Self-drilling screwSelf-drilling screw with seal


Allen head SW8 with collar, DIN7504-K

Concrete anchorConcrete anchor

ITEMSOST-V208-00EJ

DESCRIPTIONAnchor 10x50


Concrete anchorConcrete anchor


ITEMSOST-V231-00SPSOST-V232-00SPSOST-V233-00SPSOST-V234-00SP

DESCRIPTIONAnchor 8x75 - Thread 30 mmAnchor 10x105 - Thread 55 mmAnchor 10x155 - Thread 85 mmAnchor 12x170 - Thread 85 mm


EPDM tapeEPDM tape, 3M brand

Width: 30 mmThickness: 3 mmRoll: 30 m

ITEMSOST-V502-003M

DESCRIPTIONEPDM Tape, 30 m roll

Neoprene protective tapeNeoprene protective tape

Width: 120 mmThickness: 5 mmRoll: 20 m

ITEMSOST-V501-00PR

DESCRIPTIONNeoprene Tape, 20 m roll

Adhesive and structural VHB tapeAdhesive and structural VHB tape, 3M brand

Width: 25 mmRoll: 33 m

ITEMSOST-V501-003M

DESCRIPTIONVHB structural tape, 33 m roll

62 Muse by Renzo Piano

The new ‘Science Museum’ in Trento is powered by special photovoltaic modules designed

by Thesan.

Thesan has a central role in the realisation of this eco-museum: Thesan’s photovoltaic

solutions, created ad hoc for this project, have been chosen in order to supply green and

renewable energy to the museum.

This is an important challenge for a project in which the prestige of a unique location and the spirit

of innovation, required by the particular situation, are merged.This is exactly the spirit characterizing

Thesan’s daily work, aiming at offering constantly new ideas, projects and solutions within the

photovoltaic sector.

Thesan’s sun shines on MUSE by Renzo Piano.

WE ARE TALKING ABOUT THE MUSE, THE SCIENCE MUSEUM

BY RENZO PIANO, WHICH OPENED IN JUNE 2013.

Not only is the museum one of the most important European Centres for the scientific and

environmental culture, but it is also an authentic model of green building, designed to respect

the environment and exploit renewable energies.

63Muse by Renzo Piano

64 Hemera

65Hemera

HEMERA

The innovative complete system of insulated

photovoltaic roofing for Roman tile roofs.

Fully merging with the landscape.

Hemera is ideal both for new houses and for renovations

and conservation, above all in historical city centres.

66

HEMERA

Hemera

Hemera is the complete system of insulated photovoltaic roofi ng for Roman tile roofs, ideal both for new houses and renovations, conservation and restaurations, above all in historical city centres.

Quick assembly and low price.

Hemera is directly fixed to roof structure.

It is quick because it can be fi xed together

with roof insulation.

ADVANTAGES OF THE SYSTEM

The anchoring system requires

no screws, being simply interlocking.

Hemera roof can be assembled

directly by the assembler.

Little ordinary maintenance.

Little ordinary maintenance if compared to traditional

Roman tiles roof (thanks to the use of pre-painted

galvanized steel sheet).

Easy to be fi xed.

The components are cut and prepared

according to the stratum’s fi xing requirements.

Walkable.

Photovoltaic modules are completely walkable.

WHERE BEAUTY RESIDES,B E I N G U N N O T I C E D I S E V E N B E T T E R.

Photovoltaic roof.

67Hemera

Roman tiles corrugated metal sheet

Koeus module

fixing clamp

intermediatebutt strap

butt strap set

Ω metal sheetfor tiles fixing

vapour barrier

polyurethane

wood floor

framework

flexible supportin rolled roofing felt

916

229

140-210

Hemera system can be used with all types of tiles available on the market and at the same time it is possible to reuse the old Roman tiles. Thanks to the aesthetic modules, Hemera can also use parts of the stratum where the installation of photovoltaic modules is not possible.

Aesthetic modules

Koeus photovoltaic modules

68 Accessories

Insulated corrugated metal sheet Upper side material: galvanized steel, Roman tile red painted Lower side material: bituminous felt paper Insulation material: polyurethane foam (PUR) thickness 10 cm

Transmittance value 0,19 W/m2 K

ITEM AND DESCRIPTIONSOST-HE01L01-2500 sheet L=1mSOST-HE01L02-2500 sheet L=2mSOST-HE01L03-2500 sheet L=3mSOST-HE01L04-2500 sheet L=4mSOST-HE01L05-2500 sheet L=5mSOST-HE01L06-2500 sheet L=6m

SOST-HE01L07-2500 sheet L=7mSOST-HE01L08-2500 sheet L=8mSOST-HE01L09-2500 sheet L=9mSOST-HE01L10-2500 sheet L=10mSOST-HE01L13-2500 sheet L=13m

Accessories

Fixing clamp sealMaterial: santoprene,

black color

ITEMSO-HEV04-8500

DESCRIPTIONFixing clamp seal

Fixing clampMaterial: Aluminium, Alloy 6060 or equivalent

Roman tile red painted

ITEMSO-HEM01-2500

DESCRIPTIONFixing clamp

ITEMSO-HEV03-6100

DESCRIPTIONΩ metal sheet

Ω metal sheet for tiles fi xingMaterial: galvanized steel

ITEMSO-HES01-2500

DESCRIPTIONButt strap set

Butt strap set with anchoring bracketsButt strap material: reinforced technopolymer black color

Bracket material: Aluminium, Alloy 6060 or equivalent


69Accessories

Clamping set for Ω metal sheetMaterial: Aluminium, Alloy 6060 or equivalent


ITEMSO-HES02-2500

DESCRIPTIONClamping set for Ω metal sheet

ITEMSOPA-MS040A1-0000SOPA-PS040A1-0000

DESCRIPTIONMonocrystalline Koeus modulePolycrystalline Koeus module

Koeus photovoltaic moduleIndicative power 40 W

Intermediate butt strapMaterial: reinforced technopolymer

black color

ITEMSO-HEV01-8500

DESCRIPTIONIntermediate butt strap

Koeus module supportMaterial: reinforced technopolymer,

black colour

ITEMSO-HEV02-8500

DESCRIPTIONKoeus module support

ITEMSO-HEV05-8500

DESCRIPTIONAdhesive buffer

Adhesive buffer for Koeus moduleMaterial: technopolymer

HEMERA

70 Notes

Notes

72

www.thesan.com

Thesan S.p.A. - Via Torino 25 - 10050 Chiusa di San Michele (TO) Italy - tel. 0039 011 19870791 - [email protected]

00MK-L

F20-E

N00

renewable energy division - thesan s.p.a. · trenewable energy division ... over europe, south...

Documents