recoda remote... · anvs mobile device management platform consists of 6 functional modules:...
TRANSCRIPT
Mobile Device Management Platform
Operation Manual V1.4
Shenzhen RECODA Technologies Limited
All rights reserved
RECODA
Contents
1. ................................................................................................................................................ 4 Overview
2. ................................................................................................................ 5 Preparations for Installation
3. .................................................................................................................................. 6 Installation Guide
3.1. ...................................................... 6 General Instructions on Installation and Configuration
4. ............................................................................................................. 8 Platform Management Server
5. ....................................................................... 10 Instructions on Back-end Configurations of Server
6. ................................................................................................................... 12 User Management Tools
6.1. ........................................................................................................................................ 13 Login
6.2. ....................................................................................... 14 Adding or Modifying User Groups
6.3. ................................................................................................... 14 Adding or Modifying Users
6.4. ............................................................................................... 15 Adding or Modifying Devices
6.5. ........................................................... 16 Adding and Privilege Allocation of Device Groups
6.6. ...................................................................................................................... 18 Traffic Statistics
7. ............................................................................................................................. 18 Surveillance Client
7.1. ........................................................................................................................................ 19 Login
7.2. .............................................................................................................................. 21 Device List
7.3. ........................................................................... 22 Video Request and Stop Video Request
7.4. ....................................................................................................................... 24 PTZ Operation
7.5. .......................................................................................................................... 25 Video Layout
7.6. ................................................................................... 29 GPS Subscription and Cancellation
7.7. ............................................................................. 29 Warning Subscription and Cancellation
7.8. ............................................................................................... 30 Geographic Location Display
7.9. ................................................................................................................ 30 Vehicle Information
7.10. ................................................................................................... 31 Local Video and Snapshot
7.10.1. ............................................................. 31 Video File Storage Directory Settings
7.10.2. ............................................................................................. 32 Video Recording
7.10.3. ................................................................................ 33 Snapshot from the Client
7.11. .................................................................................. 34 Real-time Monitoring from the Client
7.12. .......................................................................................... 35 Conversation and Broadcasting
7.13. ..................................................................................... 38 Real-time Display of Vehicle Track
7.14. ...................................................................................................................... 40 Video Playback
7.15. .............................................................................................................................. 43 Log Inquiry
7.15.1 Log Inquiry ......................................................................................................... 43
7.15.2 Monthly Log Inquiry............................................................................................ 44
7.15.3 Traffic Inquiry ..................................................................................................... 45
8. ............................................................................................................................. 46 Wifi Download Tool
8.1. ........................................................................................................................................ 46 Login
8.2. .................................................................................................................. 47 Software Settings
8.3. ......................................................................................... 47 Adding Plan and Device Binding
8.3.1 Adding Plan.......................................................................................................... 48
RECODA
8.3.2 Device Binding ..................................................................................................... 49
8.4. .................................................................................................. 51 Modifying Plan and Device
8.4.1 Plan Modification.................................................................................................. 51
8.4.2 Bound Device Modification................................................................................... 51
8.5. ........................................................................................................ 52 Deleting Plan or Device
8.4.1 Deleting Plan........................................................................................................ 52
8.4.2 Deleting Device in a Plan..................................................................................... 52
8.6. ................................................................................................. 52 Viewing Real-time Situation
8.7. ..................................................................................................... 53 Showing/Hiding Software
9. ............................................................................................... 53 Device Configuration Tool (Optional)
9.1. ........................................................................................................................................ 54 Login
9.2. ..................................................................................................................... 55 System Settings
9.3. ............................................................................................ 56 Recording Settings Acquisition
9.4. ................................................................................................................ 57 Recording Settings
9.5. ............................................................................................... 58 Network Settings Acquisition
9.6. ......................................................................................... 58 Settings of Network Parameters
9.7. ....................................................................... 59 Acquisition of Warning Setting Parameters
9.8. ................................................................................................................... 59 Warning Settings
9.9. ....................................................... 60 Acquisition of Startup/shutdown Setting Parameters
9.10. ................................................................................................... 60 Startup/shutdown Settings
9.11. ....................................................................................................................... 62 GPS/G Sensor
9.12. ......................................................................................................................... 63 OSD Settings
9.13. ............................................................................... 63 Acquisition of PTZ Setting Information
9.14. .......................................................................................................................... 64 PTZ Settings
9.15. .................................................................................................................... 65 Motion Detection
9.16. .................................................................................................... 65 Motion Detection Settings
9.17. .................................................................................................................... 65 WIFI Information
9.18. .................................................................................................... 66 WIFI Information Settings
9.19. ............................................................................................................................... 66 Upgrading
10. .............................................................................................................. 67 Watchdog Service Program
RECODA
Program Description:
MVS_SERVER\MVS_Server_R: Platform Management Server
MVS_DB_TOOL\MVS_DB_TOOL: User Management Tool
MVS_CLIENT\MVS_Client: Surveillance client
MVS_WifiTool\MVS_WifiDownload: Wifi download tool
MVS_Device_Config\MVS_Device_Config: Device configuration tool (Optional software)
MVS_WATCHDOG\MVS_WatchDog_Server: Watchdog service program
1. Overview
ANVS Mobile Device Management Platform consists of 6 functional modules: Platform
Management Server, User Management Tool, surveillance client, Wifi download tool,
remote configuration tool, Watchdog service
Platform Management Server: provides the entire service program for ANVS Mobile
Device Management Platform
User Management Tool: provides user and device management services
Surveillance client: allows the user to preview real-time video of the device or view
vehicle driving tracks, etc. via the client program
Wifi download tool: allows auto downloads of device videos via Wifi
Device configuration tool: allows online remote modification of device parameters
Watchdog service: provides services ensuring normal operation of the server side
Network Diagram of Typical Applications:
RECODA
Vehicle management
Client
Stream media
User management Server
Network Diagram of Typical Applications
2. Preparations for Installation
Port Check: 3 ports are required for the operation of the MVS application, the default
ports are as follows:
5700: The port for the device to be registered on the platform server
6008: The port for the surveillance client, etc. to be connected to the platform server
5678: The port for the stream media of the device to be sent to the platform server
Ensure no configured port is occupied before using with the following method:
1. Without opening MVS_Server_R, open Start>> Run, input cmd and press Enter to
turn on the command prompt;
2. Input telnet 127.0.0.1 5700 in the command line and press Enter, if the prompt of
connection failure is shown, no port is occupied.
Firewall Settings: If the firewall is enabled in the operating system, exceptions are
required to be set for the 3 ports above. Please contact the network administrator or
RECODA
technical service personnel for details.
Framework 2.0: Framework, which is available at Microsoft’s website, is required for the
operation of the platform software.
VC2008 runtime environment: the same to the above;
Requirements for software and hardware environment for device installation:
CPU: >2.0GHz;
MEM: >1G;
Free Space on the Hard Disc: > 1G;
OS: Windows XP, Windows2000, Windows2003, Windows7, WindowsVista
3. Installation Guide
The current version of the software is installation free, just copy the target executable file
pack directly to the designated directory.
3.1. General Instructions on Installation and Configuration
System Installation Flow:
Start
Install Server Application
Install Client Application(Including surveillance client and configuration
tools)
End
RECODA
System Configuration Flow:
No
RECODA
System Debugging Flow:
4. Platform Management Server
Run MVS_Server_Translate_R.exe in the directory MVS_SERVER_TRANSLATE
And enter the following menu after opening the following program:
RECODA
Device Name: displays device name
Device No.: device ID
State: 3G, Wifi, offline; (the first 2 refer to means to register on the platform)
Channels 1, 2, 3, 4: media traffic of channels (data to be displayed for real-time video)
Device Address: IP address of the online device
Network card address: IP address of the network card for connection between the server
and the device
Port: the Port for connection between the server and the device
Online/Offline Time: the last online/offline time of the device
Type: 6000 series, 7000 series
Version: Device version information
User name: User name of the current online user
Address: IP address of the user who has logged in currently
Online time: The last online time
Video visits: Number of videos requested by the user (1.2.3.4)
RECODA
5. Instructions on Back-end Configurations of Server
Local parameters:
Open the server side configuration program: MVS_Server_Local_Config.exe, as shown in
the figure above (content marked “*” must be inputted).
Language file (display language on the server side interface): Chinese 中文/English 英文
Port for communication between the server and the client: 6008
Port for the signaling communication between the server and the client
Device registration connection port: 5700; port for the device to be registered on the
platform
Device media connection port: 5678; port from the device media to the platform server
Overtime for the communication between the server and the device: Overtime for the
communication between the server and the device
Overtime for waiting the device to respond: Overtime for waiting the device to respond, in
seconds
3G media reporting address: Domain name or IP address of the platform server for the
RECODA
front end to be registered via 3G methods
Wifi media reporting address: IP address of the platform server for the front end to be
registered via Wifi
Database and Debugging Information Parameters:
The default settings are recommended; please contact your technical support personnel
for amendment if necessary.
Recording Control Parameters:
RECODA
It is recommended to maintain the default settings except for the disk list, please contact
your technical support personnel for amendment if necessary.
Disk list: the partition for the platform server to safe video data, which is recommended to
be a non-system partition.
6. User Management Tools
These allow management of users and user privilege, adding and modifying relevant
information of the device
RECODA
Add user group
Add User
Add device
Select user group
Add device group
Bind devices to the group
Flow 1
Flow 2
Flow 3
Brief Operation Flows
6.1. Login
Input user name, password (super for both user name and password by default), server IP
and port information in the login window, Press Login to enter the main menu as shown in
the figure below;
RECODA
6.2. Adding or Modifying User Groups
Add: Click on Add and input user group name and select user group type (administrator
or ordinary user) and click on Save;
Delete: Select the user group to be deleted and click on Delete, and then confirm to
delete information of the group;
Modify: Select the user group to be modified, input the new user group name and type,
and then click on Save;
Note: The administrator can log in the User Management Tool while ordinary users cannot
6.3. Adding or Modifying Users
Add: Click on Add, select the user group of the user, input user name and password and
click on Save;
Delete: Select the user to be deleted and click on Delete, and then confirm to delete
information of the group;
RECODA
Modify: Select the user to be modified, click on Modify, input the new user name and
password and click on Save;
6.4. Adding or Modifying Devices
Add: Click on Add, input the device ID, device name, SIM card number, limited speed and
click on Save;
Delete: Select the device to be deleted and click on Delete, and then confirm to delete
information of the group;
Modify: Select the device to be modified, input the new device ID, device name, SIM card
number, license plate number, model, network, company, motorcade, route, driver, sex,
contact number, staff number and click on Save;
RECODA
6.5. Adding and Privilege Allocation of Device Groups
Add: Click on Add Group, input the group name and click on Save;
Modify: Select the group to be modified and click on Modify, input the new group name
and click on Save;
Delete: Select the group to be deleted and click on Delete
Device privilege allocation:
As shown in the figure below, select user group, and then move the device in the left list to
the right list;
RECODA
The figure above shows users of the administrator group, who have the privilege of
viewing the devices 322011.32012.32013 in the test group;
RECODA
6.6. Traffic Statistics
As shown in the figure above, select the user whose traffic information is to be get and
input the time period for inquiry,
Click on Inquire to display the traffic information of this user in this period;
7. Surveillance Client
This monitors the device information in real time, such as video information, geographic
location and warning information, etc.;
RECODA
7.1. Login
Open the client program to pop up the login window as shown in the figure below;
User: Information of relevant user set at the database server side;
Password: Information of relevant user password set at the database server side;
Server: IP address of the server side
RECODA
Port: 6008 by default, which is not modified;
Input user name and password, confirm server address and port, and then press Login to
enter the system;
Click on Cancel to cancel login and quit the current program;
The interface after login in shown below;
The prompt as shown in the figure below will appear if the user has no access to the
device;
RECODA
7.2. Device List
After entering the system as shown in the figure below, device groups and devices to
which the user has access will be shown in the list on the left; and at the same time,
devices currently on line will be shown in “Online devices”; warned devices will be shown
in warned devices; online devices will be shown in green, warned devices will be shown
in red; numbers following the device name [A/B/C]indicate: A for total number of devices
in the group; B for number of online devices; C for warned devices;
RECODA
7.3. Video Request and Stop Video Request
Real-time video can be realized through the following methods
1: Select preview from the context menu:
As shown in the figure above, right click on the device or right click on the channel
number after opening a device to pop up the option and select preview; and then the
real-time video information will be shown in the selected window;
RECODA
2: Double click on the device channel number
Select the channel of a device and double click this entry to play real-time video of this
Channel in the selected window
3: Drag the whole device to play real-time video
Select the device, and press the hold the left button of the mouse to drag the device into
the video window to play 4-channel video of this device;
To stop video request, just right click on the device list and select Stop Preview, as
shown in the figure above; or select Close Video from the context menu of the video
interface to close the video channel of the current window) or Close All (to close all
windows of the video)
Please refer to the figure below:
RECODA
Hiding video title bar:
The video title bar located below the video window displays information about the video
channel, such as the text information shown on the bottom of the figure above, you can
select from the context menu on the video to select hiding or showing the title bar to hide
to show such information;
7.4. PTZ Operation
Select the menu to be controlled from the video to enter PTZ control; As shown in the
figure above, Speed X refers to the PTZ speed along the X-axis, and speed Y refers to the
PTZ speed along the Y-axis, Zoom + refers to zooming in and Zoom – refers to zooming
RECODA
out, and the adjustment of Focus and Aperture is similar; the PTZ can be moved upwards,
downwards, leftwards, rightwards, as well as to the upper left, upper right, lower left and
lower right directions;
7.5. Video Layout
Video layout:
The program currently supports video display in 1, 4, 1+5, 1+7, 9, 16, 25 and 36 windows
(a black window without content means that there’s no video display of the device at
present), some effects are shown in the figure below:
1-window video
RECODA
4-window video
RECODA
1+5-window video
As for 1+5-window and 1+7-window display, if you double click on the small window, it
will be shown in the large window, with the video in the large window and that in the
small window exchange the content at the same time; RECODA
16-window video
In the case of multi-channel display, you can double click on the window to play the
video of the channel only, and then click on the window again to return to the original
multi-channel display; Press the Full Screen key at the bottom to display the video in full
screen. RECODA
7.6. GPS Subscription and Cancellation
As shown in the figure above, you can select to Subscribe or Unsubscribe GPS (Note:
subscribed by default); the GPS information of the current device will be shown on the
GPS panel if subscribed and not be upgraded if unsubscribed;
7.7. Warning Subscription and Cancellation
As shown in the figure above, you can select to Subscribe or Unsubscribe warning from
the context menu (Note: subscribed by default); the warning information of the current
device will be shown on the warning panel if subscribed and not be upgraded if
unsubscribed, as shown in the figure below.
When there’s warning of the device, it will be sent to the client at the same time to display
relevant warning information of the device
RECODA
Warning information types include device overspeed, input warning, motion detection,
video loss, GPS module warning, GSensor warning, storage medium 1 abnormal, storage
medium 2 abnormal, system exception, device online, device offline and speed normal; all
types are checked by default; you may uncheck the types of information you do not want
to receive from the context menu;
7.8. Geographic Location Display
If GPS information is subscribed, you can select Geographic Location, from the context
menu of the device list, the location of the current device will be shown on the map;
7.9. Vehicle Information
You can right click on the device list and select Vehicle Information to pop up the Vehicle
Information window, As shown in the figure below, where all information of the current
vehicle is shown; you can also inquire vehicle information from vehicle information in Log
Inquiry;
RECODA
7.10. Local Video and Snapshot
Recording video file and snapshotting from the client
7.10.1. Video File Storage Directory Settings
As shown in the figure below, select settings from the title bar of the window to pop up the
parameter settings menu, where you can set the directory to save video files;
RECODA
When there’s only the disc for the storage instead of the detailed directory, the
folder will be created automatically;
When there’s no disk for the storage, program error will be caused, so please
ensure correct disc;
7.10.2. Video Recording
Recording from the context menu
As shown in the figure below, select the image for recording and directly right click to pop
up the context menu, where you can select Start Recording;
Start recording with the Record button
Select the image to be recorded and click on Record to start recording
RECODA
Note: Video files saved are classified by the corresponding device ID in the preset video
directory; and files of the same device are classified by time as shown in the lower right
corner of the figure above, which shows the video file of the device ID 32001 recorded on
2010-12-11;
7.10.3. Snapshot from the Client
1, Snapshotting from the context menu
As shown in the figure below, you can select the window to be snapshotted, and directly
right click to pop up the context menu, where you can select Manual Snapshot;
2, Snapshot with the Snapshot button
Select the window to be snapshotted and click on the Snapshot button
Note: Picture files saved are classified by the corresponding device ID in the preset
RECODA
picture directory; and files of the same device are classified by time as shown in the lower
right corner of the figure above, which shows the picture file of the device ID 32001;
7.11. Real-time Monitoring from the Client
Sound on:
As shown in the figure below, select the window to turn the sound on and click on Sound
On to turn on the sound of the device being played; the figure below shows that the sound
of the device IDed 32001 is turned on;
Sound off:
After turning on the sound, the button will turn to Sound Off, click on it to turn off the
sound;
RECODA
Note: If the sound of the device recording is set to MIC input, only the sound output of
channels 1 and 2 is turned on by default; if set to LINE input, only the sound output of
channels 1 is turned on by default;
7.12. Conversation and Broadcasting
Conversation: Allows mutual sending of voice information between the client and the
device;
As shown in the figure below, select online settings and select “Start Conversation” from
the context men to display the message “In conversation” on the task bar of the program;
As shown in the figure below
RECODA
Then “Start Conversation” is changed to “Stop Conversation”, as shown in the figure
below
The conversation between the client and the device is realized via MIC, during which
period, voice from the client can be heart at the device, and during the conversation
between the device and the platform, the voice from the device can be heart at the client;
Broadcasting: Allows the client to send voice information to multiple devices
Set the device for broadcasting: All devices accessible for the current user are shown on
the left, where you can select the vehicle for broadcasting (offline devices cannot be
moved) and click on to move the currect device to the right; select the group
name and click on to move all online devices in the current group to the
right; select any entry on the right and click on to remove the settings on
the right list;
RECODA
To move all online devices to the right, just directly click on , and all
currently online devices will be moved to the right; and click on to remove
all devices from the right list;
Note: The device cannot be moved leftwards and rightwards during the broadcasting, you
must stop the broadcasting to move the device;
Broadcasting: After setting the device for broadcasting, click on , then the
voice sent from client can be heart at the device; to stop broadcasting, click on
Note: The broadcasting window cannot be closed during active broadcasting, and a
prompt as shown below will pop up upon closing, to close the window, click on Yes.
RECODA
7.13. Real-time Display of Vehicle Track
As shown in the figure below, you can enter the E-map module, if you check Online
Device, the GPS and speed information of this device will be shown at the lower left
corner, and the real-time running track of the device will be displayed on the map, in the
meanwhile, you can turn on the real-time video of the vehicle on the right as shown in the
figure below;
Show/Hide real-time video window: When viewing real-time map information, you can
show or high the real-time video window, the figure above shows the layout with the map
on the left and the real-time video on the right, and the figure below shows the layout with
the map on the upper part and the real-time video on the lower part, you can click on the
Hide button to hide it;
RECODA
Single-vehicle, multiple –vehicle tracks
If single-vehicle is selected, only the real-time track of a single vehicle is displayed and it
is not possible to check multiple devices; If multiple-vehicle is selected, you can check
multiple online devices, and you can select locations on the map from the context menu
of the device to locate the vehicle; Please refer to the figure below
RECODA
When the real-time track information of multiple devices is shown, the display is shown in
the figure below;
Note: When GPS tracks of multiple vehicles are displayed, you need to zoom out
manually because the system does not allow auto zooming out;
7.14. Video Playback
Device Video Search: allows searching the video files of the online device on the storage
medium;
Note: Video files of the server side and the device should be downloaded to local storage
for playback;
As shown in the figure below, select a certain online device and select “Device Video”
from Video Type, adjust the start time and end time of search, and click on Search, the
program will start searching all video files on the device storage meeting the
requirements;
RECODA
After searching, the searching status is ended and the searched video information will be
shown in the “Video Files” list on the right as shown in the figure below, which shows the
Start Time, End Time, File Size, Channel Number, Device Name, Progress and Status,
Device ID, and the video file will be named automatically, and the name will be used when
the file is downloaded to local storage;
RECODA
Device Video Download: allows downloads of video files stored on the storage of the
device to the local directory of the client
As mentioned above, you can check the video file to be downloaded from the device
video files searched and click Download to start downloading; You can check multiple files
for downloading; Downloaded video files will be saved to the video file directory set in
Settings menu; The figure below shows the downloading progress and status of files
being downloaded;
Play Device Video: when device video is downloaded to local directory (Note: the
download must be completed), you can check the video file from the list and click on Play
or select Play from the context menu to play this video;
Open Directory of Device Video File Downloads: select a video file already
downloaded and open the context menu to click on Open Directory;
Local Video Playback: play video files in the local storage of the client
As shown in the figure below, select “Local” from video type, select the directory of the
RECODA
video file and click on ‘Search’ to display searched video files in the list; you may double
click on the file or click on Play to play this video file;
Playback Speed Control of Local Video: As shown in the figure below
for fastbackward; for fastforward; for current speed,
there are options including X1/X2/X4/X8/X16;
7.15. Log Inquiry
7.15.1 Log Inquiry
The Log Inquiry allows you to inquire the online and offline logs and overspeed logs of the
device on the current day; as shown in the figure below, after entering Log Management,
select the device and then the warning type (online/offline, overspeed), set start time and
end time and click on Inquire to show log information in the life; RECODA
Input entries to be displayed on one page in Page Size, e.g.: 20 means 20 entries are
allowed to be shown on one page, entries more than 20 will be shown on the next page;
Press Home to show the first page, press Previous to show the previous page; similarly,
press Next to show the next page and End to show the last page;
7.15.2 Monthly Log Inquiry
The Monthly Log Inquiry allows you to inquire the online and offline logs and overspeed
logs of the device in the current month; as shown in the figure below, after entering the
Monthly Log Management interface, select warning type (online/offline, overspeed), set
the month to be inquired, check whether to inquire all devices, and then click on Inquire,
to show monthly log information in the list;
Press Home to show the first page, press Previous to show the previous page; similarly,
press Next to show the next page and End to show the last page;
RECODA
7.15.3 Traffic Inquiry
As shown in the figure below, set the start time and end time for inquiry and click on
Inquire to inquire the traffic information before the current login of the user; Note: traffic
for login the client at the current time is excluded;
Press Home to show the first page, press Previous to show the previous page; similarly,
press Next to show the next page and End to show the last page; RECODA
8. Wifi Download Tool
This allows you to download video of the device via Wifi. Its main advantages are saving
3G traffic and automatic download. Details functions are as follows:
1. By whatever mode the device is registered to the platform, as long as the Wifi
parameters are correctly set, the router is connected and the Wifi zone is entered, the
conditions for Wifi automatic download are met;
2. If a download plan is added to the device and activated, the video will be automatically
downloaded via Wifi once the tool is opened.
3. The tool will not switch the registration mode of the device positively, however, if he
device is offline in one mode, it will be automatically registered with another mode.
(3G and Wifi)
4. After switching of registration mode and successful registration, the tool will continue
with the video download via Wifi.
8.1. Login
The login is similar to that of surveillance client, please refer to 7.1.
RECODA
8.2. Software Settings
After logging in the software, the “Parameter Settings” tag will be shown as the following:
Note: All parameter settings will take effect after reboot except for interface language
switching
Retrials: Times of retrying after failure of video request command
Retrial time: The time interval for retrial after failure of video request command
Max. Tasks: Number of tasks allowed to be downloaded at the same time
Disc Selection: The partition of the local disc for storage of downloaded video
Space Reservation: When the space on the selected partition is lower than this value, it
will switch to the next selected partition delete the oldest video file
Interface Language: interface language of this tool
8.3. Adding Plan and Device Binding
When switched to the “Plan Management” tag, the display is as follows:
RECODA
8.3.1 Adding Plan
1, Click on the “Add” button to pop up the “Edit Plan” window as shown below:
2, Input plan name, video type, plan type, days available for downloading as well as data
and time, select whether to enable 1-frame download and click on Confirm
Note:
Days available for downloading: is only applicable to downloading every day and refers to
downloading video files from the N-1 days before to today (completed ones will not be
further downloaded. N can be 7 at the most.
Video Type: there are 3 types of video for selection: Normal, Warning and All.
RECODA
Plan Type: Once for downloading once only; Daily for checking download every day.
I-Frame: “Y” for downloading 1 frame only, which will result in faster download and giving
up some unimportant frames.
3. Added plans will be shown in the plan list as shown below:
4. The default status of the plan is “disabled”, to enable the plan, you need to click on
“Download”. The plan cannot be enabled if not bound with the device.
8.3.2 Device Binding
After being added, the plan can only be executed after being bound with the device, and
then the bound device will download device video to local disc according to the plan.
Steps for device binding are as follows:
1. Check the device to be bound with the plan from the device list tree on the left;
2. Select corresponding plan from the plan list and click on “Add” for device binding;
RECODA
3. Successful binding will be shown in the binding list, and video files of all channels will
be downloaded by default.
RECODA
Note:
One device can only be bound with one plan;
Different binding lists will be shown when different plans are selected.
4. When device binding is successful, click on “Download” to start downloading Wifi video.
8.4. Modifying Plan and Device
8.4.1 Plan Modification
The plan must be stopped for modification and cannot be modified when running.
1. Select the plan to be modified. (If the plan is running, click on “Stop”), click on “Edit”;
2. Modify in the pop-up “Edit Plan” window;
3. Click on Confirm after modification.
8.4.2 Bound Device Modification
To modify information of a bound device, the corresponding plan must be stopped.
1. Stop the corresponding plan;
2. Modify the number of channels directly from the binding list;
3. Click on “Save”.
RECODA
8.5. Deleting Plan or Device
To delete a plan or device, the plan must be stopped because running plans and devices
cannot be deleted, and after deleting a plan, the device bound with it will automatically be
removed from the plan.
8.4.1 Deleting Plan
1. Select the plan to be deleted and click on “Stop”;
2. Click on “Delete” from the plan list to delete the plan.
8.4.2 Deleting Device in a Plan
1. Stop the plan of the device;
2. Select the device to be removed from the list of bound devices, and click on “Delete” in
the list of bound devices;
3. Click on “Save”.
8.6. Viewing Real-time Situation
You can view information of the device currently downloading the Wifi video from
“Real-time Status”. As shown in the figure below:
The Description displays the channel currently downloading and prompts of exceptions or
network problems;
The Progress shows the time of the video being downloaded.
In “Message” field, information like online/offline of the device and status of
entering/leaving the Wifi zone, etc..
RECODA
8.7. Showing/Hiding Software
By default, the main menu will appear after opening the Wifi Download Tool, click on the
Minimize button to hide the software to the tray icon on the task bar, right click on the
icon to select to display the main menu or quit the software.
Optional)
This allows modification of parameter settings of the device via the cofig side: including
system settings, recording settings, network settings, warning settings, startup-shutdown
settings, security settings, GPS/G sensor settings, OSD/SD card settings, PTZ settings,
tware version; only accessible to
Super User;
9. Device Configuration Tool (
motion detection settings and remote upgrading of sof
As shown in the figure below;
RECODA
9.1. Login
As shown in the figure below, input user name, password, server address, port number,
and Press Login to enter the system;
RECODA
9.2. System Settings
System information acquisition
Check an online device from the tree list on the right, click on Acquire in the information
bar to acquire information about software version number, hardware version number and
MCU version number of the current settings; as shown above
Acquisition of basic information
Check an online device from the tree list on the right, click on Acquire in the information
bar to acquire basic information of the current device, including date, time zone, operation
overtime, device ID, company name, license plate number, driver name and route
number;
Basic information settings
Check an online device from the tree list on the right, click on Acquire in the information
RECODA
bar to acquire basic information of the current device and modify information including
date, time zone, operation overtime, device ID, company name, license plate number,
driver name and route number; click on Set to modify relevant parameters of the device;
9.3. Recording Settings Acquisition
As shown in the figure above, check an online device from the tree list on the right, click
on Acquire to acquire recording settings information of the current device;
Open timer list and sub-bit stream window and click on Acquire to display settings about
timed recording and sub-bit stream of the current device;
RECODA
9.4. Recording Settings
Check an online device from the tree list on the right, click on Acquire to acquire
information about recording settings and relevant parameters of the current device; click
on Set to modify relevant parameters of the device;
RECODA
9.5. Network Settings Acquisition
As shown in the figure above, check an online device from the tree list on the right, click
on Acquire to acquire information about network settings of the current device;
9.6. Settings of Network Parameters
As shown in the figure above, check an online device from the tree list on the right, click
on Acquire to acquire information about network settings of the current device; click on
Set to modify network parameters of the device;
RECODA
9.7. Acquisition of Warning Setting Parameters
As shown in the figure above, check an online device from the tree list on the right, click
on Acquire to acquire information about warning settings of the current device;
9.8. Warning Settings
As shown in the figure above, check an online device from the tree list on the right, click
on Acquire in the information bar to acquire information about warning settings of the
current device; click on Set to modify warning parameters of the device;
RECODA
9.9. Acquisition of Startup/shutdown Setting Parameters
As shown in the figure above, check an online device from the tree list on the right, click
on Acquire to acquire information about startup/shutdown settings of the current device;
9.10. Startup/shutdown Settings
As shown in the figure above, check an online device from the tree list on the right, click
on Acquire to acquire information about startup/shutdown settings of the current device;
click on Set to modify relevant startup/shutdown parameters;
7.2.12 Security Settings
RECODA
As shown in the figure above, modify relevant password and confirm, and then click on
Modify; RECODA
9.11. GPS/G Sensor
As shown in the figure above, check an online device from the tree list on the right, click
on Acquire to acquire information about GPS/G Sensor Settings of the current device;
Click on Set to modify relevant GPS/G Sensor parameters
RECODA
9.12. OSD Settings
As shown in the figure above, check an online device from the tree list on the right, click
on Acquire to acquire information about OSD/SD settings of the current device;
Click on Set to modify relevant OSD/SD parameters.
9.13. Acquisition of PTZ Setting Information
RECODA
As shown in the figure above, check an online device from the tree list on the right, click
on Acquire to acquire information about PTZ settings of the current device;
9.14. PTZ Settings
Click on Set to modify PTZ parameters
RECODA
9.15. Motion Detection
As shown in the figure above, check an online device from the tree list on the right, click
on Acquire to acquire information about motion detection settings the current device;
9.16. Motion Detection Settings
Click on Set to modify motion detection parameters.
9.17. WIFI Information
RECODA
As shown in the figure above, check an online device from the tree list on the right, click
on Acquire to acquire information about WIFI settings of the current device
9.18. WIFI Information Settings
To modify relevant WIFI parameters, just click on Set to modify wifi settings.
9.19. Upgrading
As shown in the figure above, press Select to select upgrading file, and then the file name,
size, version number, file type of the file will be displayed, click on Upload to display the
uploading progress and upload the file to relevant directory of the server, and upon
completion of uploading, directly click on Upgrade to start upgrading of the device;
RECODA
Click on Acquire Upgrading File to acquire information (type, version)of upgrading files
saved in the directory of the server, as shown in the figure above; Select a program and
click on Upgrade Multiple Files, to upgrade all files in the list to be upgraded;
10. Watchdog Service Program
Run program: MVS_WatchDog_Server.exe in the directory MVS_WATCHDOG_SERVER
When opening the Watchdog service program, if the stream media server program is
closed due to exception, the Watchdog program will automatically restart the stream
media server program; and its thus recommended to be enabled;
The program interface is shown below:
Internal=30 means that the stream media server program will be restarted 30 seconds
after abnormal closing is detected;
Note: Always open the Watchdog program before the server side program; the Watchdog
program and the stream media server program must be on the same host; and the
Watchdog targets only the client;
RECODA