regional cal. trigger milestone: production complete - u. wisconsin
DESCRIPTION
Receiver Mezz. Card. Bar Code. Front. Adder. mezz link cards. EISO. SORT ASICs (w/heat sinks). Input. BSCAN ASICs. EISO. DC-DC. 7/25 tested (18). 153/154 Tested (126). Back. Oscillator. Bar Code. Phase ASIC. PHASE ASICs. Clock Input. Clock delay adjust. BSCAN - PowerPoint PPT PresentationTRANSCRIPT
W. Smith, U. Wisconsin, August, 2005 Trigger Status - 1
SORTASICs(w/heat sinks)
EISO
EISO
Bar Code
Input
DC-DCConverters
Clock delay adjust
Clock Input
Oscillator
DC-DC
Adder
mezzlink
cards
BSCANASICs
PHASEASICs
MLUs
BackBar Code
Front
Regional Cal. Trigger Milestone:Regional Cal. Trigger Milestone:Production CompleteProduction Complete
- U. Wisconsin- U. Wisconsin
Regional Cal. Trigger Milestone:Regional Cal. Trigger Milestone:Production CompleteProduction Complete
- U. Wisconsin- U. Wisconsin
Receiver Card: Electron Isolation & Clock: Jet/Summary:ReceiverMezz. Card
BSCANASICs
SortASICs
BSCANASICs
PhaseASIC
124/153tested(126)
153/154Tested(126)
7/25tested
(18)
3/25tested
(18)
(27/28CustomBackplTested)
(18)
fractiontested
(needed)
EISO
Clock
Front
Back
W. Smith, U. Wisconsin, August, 2005 Trigger Status - 2
RCT Full Crate Operating at CERNRCT Full Crate Operating at CERN- U. Wisconsin- U. Wisconsin
RCT Full Crate Operating at CERNRCT Full Crate Operating at CERN- U. Wisconsin- U. Wisconsin
Used for HCAL, ECAL, SLB, Global Calorimeter Trigger integration tests• Located in Electronics Integration Center in Bat. 904 - more tests planned (later slides)
Rear: Receiver Cards Front: Electron, Jet, Clock Cards
x 18
W. Smith, U. Wisconsin, August, 2005 Trigger Status - 3
CSC Trigger Muon Port Card &CSC Trigger Muon Port Card & Sector Processor Sector Processor
CSC Trigger Muon Port Card &CSC Trigger Muon Port Card & Sector Processor Sector Processor
Mezzanine Mezzanine cardcard
TLK2501 TLK2501 serializersserializers
OptomodulesOptomodules GTLPGTLPReceiversReceivers
VMEVMEInterfaceInterface(glue logic)(glue logic)
Muon Port Card (Rice):•6 built w/FPGA mezzanines, fully tested in
beam, in radiation, in crate w/ 7 Trigger Motherboards connected to Sector Processor
•Final production done (tested 47)
•Total needed: 60 (75 incl. spares)
Sector Processor (Florida):•PPP built & tested in
structured beam & full system test (next slide)•In production (1st 2 made) •Total needed: 12
XilinxVirtex-2800 User I/O
15 X 1.6 Gb/s optical links from MPC
W. Smith, U. Wisconsin, August, 2005 Trigger Status - 4
CSC Muon SorterCSC Muon Sorter- Rice- Rice
CSC Muon SorterCSC Muon Sorter- Rice- Rice
Muon Sorter Board
Rice MS sorts SP muons and transmits to Vienna Global Muon Trigger
Integration Test successful in Jan. ‘05 in Vienna
W. Smith, U. Wisconsin, August, 2005 Trigger Status - 5
CSC Trigger Full Chain TestCSC Trigger Full Chain Test- Florida, Rice, UCLA, March’05- Florida, Rice, UCLA, March’05
CSC Trigger Full Chain TestCSC Trigger Full Chain Test- Florida, Rice, UCLA, March’05- Florida, Rice, UCLA, March’05
tester cards tester cards provide full 12 provide full 12
SP input to MSSP input to MS
4 TMB4 TMB5 TMB5 TMB
Track-Finder Crate:Track-Finder Crate:SPSP CCB CCB MSMS
MPCMPCCCBCCB This is 1/60 of full CSC Trigger w/Track-Finder crate 100%loaded into the Muon Sorter
Results in reinforced grounding for better signal quality on production TF backplane & cards
Fully Loaded Peripheral CrateFully Loaded Peripheral Crate
W. Smith, U. Wisconsin, August, 2005 Trigger Status - 6
Operate fully functional trigger electronics at CERN•Employed in myriad tests & preparation activities
Tests in Electronics Integration Center• Labs & row of racks for all electronicssubsystems
• Test interfaces & integration as much as possible before move to USC55
Cosmic Challenge in SX5• Test multiple triggercomponents with multipledetector components duringthe magnet test.
• Verify trigger functions &interfaces w/detectors onsurface
Installation in Underground CountingRoom (USC55)• Expect start by Nov 30 ‘05 -- “ready for crates”
• Racks & Infrastructure installed, cooling operational
UndergroundCounting Room
Trigger Commissioning PlansTrigger Commissioning PlansTrigger Commissioning PlansTrigger Commissioning Plans
USC55
W. Smith, U. Wisconsin, August, 2005 Trigger Status - 7
Assemble one each of critical racks in central trigger core in
underground counting room
Trigger Install/Commission:Trigger Install/Commission:Electronics Integration Center: Prevessin 904Electronics Integration Center: Prevessin 904
Trigger Install/Commission:Trigger Install/Commission:Electronics Integration Center: Prevessin 904Electronics Integration Center: Prevessin 904
Test/integrate triggerelectronics in EIC beforeuse in Cosmic Challengeor installation in USC55 Started April 18
Electronics Labstrigger & electronics integration racks
W. Smith, U. Wisconsin, August, 2005 Trigger Status - 8
HCAL-SLB-RCT Integration in EICHCAL-SLB-RCT Integration in EIC- Maryland, Lisbon, Wisconsin- Maryland, Lisbon, Wisconsin
HCAL-SLB-RCT Integration in EICHCAL-SLB-RCT Integration in EIC- Maryland, Lisbon, Wisconsin- Maryland, Lisbon, Wisconsin
Sent synchronous jet data from HCAL HTR Cards thru 6 SLB over 10m copper 4Gb/s Vitesse Links to 6 Regional Calorimeter Trigger Receiver Mezzanine cards, thru Receiver Cards, Backplane and Jet Summary Card to Jet Capture Card recording output of 256 crossings. See output jets on all channels in expected crossings.
W. Smith, U. Wisconsin, August, 2005 Trigger Status - 9
CSC trigger in cosmic challengeCSC trigger in cosmic challenge - Florida & Rice - Florida & Rice
CSC trigger in cosmic challengeCSC trigger in cosmic challenge - Florida & Rice - Florida & Rice
Set-up in SX5 as operated during 2004 beam tests• Connected 6 chambers in ME+2 & ME+3
20° slice on YE+2 SP
CSC Track-Finder will provide a cosmic muon trigger based on a coincidence of LCTs in two or more disks
CCB
W. Smith, U. Wisconsin, August, 2005 Trigger Status - 10
USC55 Trigger Schedule OverviewUSC55 Trigger Schedule OverviewUSC55 Trigger Schedule OverviewUSC55 Trigger Schedule Overview
Four phases of activity in USC55:• Installation, Detector Integration, Central Integration, Commission
W. Smith, U. Wisconsin, August, 2005 Trigger Status - 11
Trigger Install Schedule - ITrigger Install Schedule - ITrigger Install Schedule - ITrigger Install Schedule - I
Install/Commission Trig. Crates: Dec ‘05 - Apr ‘06• Tested Trigger Crates installed, re-tested,
interconnected, inter-synchronized
• Regional and Global Detector trigger systems integrated with each other and Global Trigger
Integrate w/Detector Elect.: May ‘06 - Oct ‘06• Cal Trig connected to E/HCAL USC55 electronics
• Muon Triggers connected to optical fibers carrying trigger data from detector
• Global Trigger connected to TTC distribution system
• Operation with Local DAQ
W. Smith, U. Wisconsin, August, 2005 Trigger Status - 12
Trigger Install Schedule - IITrigger Install Schedule - IITrigger Install Schedule - IITrigger Install Schedule - II
Integrate w/Central Trig. & DAQ Nov ‘06 - Apr ‘07• Subset of triggers available to detectors in UXC55• Dedicated testing with individual detectors• Detailed synchronization testing of all systems• Testing with Central DAQ
System Commissioning May ‘07 - Jun ‘07• Full capability of trigger system available• Tests with all detectors and trigger operating
simultaneously together and partitioned• Trigger and DAQ can operate in 8 separate partitions
Ready for single beam commissioning, Jul ‘07• Beam-gas synchronized triggers• Halo muon events (see following slides)
W. Smith, U. Wisconsin, August, 2005 Trigger Status - 13
Preparing for OperationPreparing for Operationbefore beam & after install/commissionbefore beam & after install/commissionPreparing for OperationPreparing for Operation
before beam & after install/commissionbefore beam & after install/commissionRun as much of CMS as possible integrated
with TriDAS for as long as possible to shake out problems.
• Run for long periods of time with artificially generated data of as high a volume a possible loaded as close to the front ends as we can manage with as high a trigger rate as we can handle.
• This type of continuous "stress-testing" should help us to make the system robust.
• Also run for long periods of time with cosmic triggers
Download simulated data in both the readout and trigger streams
• See if we can pass these all the way to yield triggers and physics signals on tape.
W. Smith, U. Wisconsin, August, 2005 Trigger Status - 14
Trigger Commissioning PhasesTrigger Commissioning Phaseswith first collisionswith first collisions
Trigger Commissioning PhasesTrigger Commissioning Phaseswith first collisionswith first collisions
1. Synchronization & Trigger testing/evaluation• Determine that data is being properly set up (e.g. synchronized),
triggered and transported to farm nodes.
2. Technical validation of subdetector data • Determine from detector data written to farm nodes that detectors
are indeed being read out properly and if the data is indeed correct technically
3. Evaluation/calibration/validation of subdetector data• Study the subdetector data calibration and performance to validate
its content for physics analysis
4. Evaluation of data by physics groups.• Make basic physics plots of detector data to validate performance
5. Feedback from Physics Groups.• Transport of min-bias data to the remote Tier-1 centers for input into
the simulation and regeneration of our simulation samples• Calculation of trigger efficiencies and feedback to the trigger group
on physics problems with the day 1 trigger set.
W. Smith, U. Wisconsin, August, 2005 Trigger Status - 15
Commissioning TriDAS ModesCommissioning TriDAS ModesCommissioning TriDAS ModesCommissioning TriDAS Modes
Normal Mode•Trigger rate at 50 kHz (evolves from 12.5 50 75 100 kHz)
“Safe” Mode•Trigger rate < 10 kHz•Level-1 Latency 3.2 s (128 bunch crossings - bx)•“Un-buffered” Trigger Rule
•Each L1A separated by at least 8.75 s•Assures that all detectors are read out before next L1A - no storage of additional events after each L1A.
• Limit set by tracker & presh., deadtime of 9% @ L1A rate of 10 kHz.
“Single Step” Mode•Trigger rate “low”•Level-1 Latency 3.2 s (128 bunch crossings - bx)•“Handshake” Trigger Rule:
•After each L1A, Global Trigger System raises busy and waits for DAQ, to lower the busy after the event has been successfully read out.
•Large deadtime, only usable for debugging and initial commissioning.
W. Smith, U. Wisconsin, August, 2005 Trigger Status - 16
Initial Trigger MenuInitial Trigger MenuInitial Trigger MenuInitial Trigger Menu
Level-1 Trigger Totally Open• Calorimeter low ET or any muon (no PT cut)
• Other candidate triggers for later running are active for diagnostic and study purposes
• Continue Halo Muon & Cosmic triggers
Test Triggers• Dedicated runs and possible operation during
abort gaps to verify detector functionality and synchronization.
W. Smith, U. Wisconsin, August, 2005 Trigger Status - 17
Summary - TriggerSummary - TriggerSummary - TriggerSummary - Trigger
Trigger Hardware:• Finished with, in or about to start production
Trigger Integration• Much testing already done• Program of Electronics Integration Center Tests• Trigger Program for Cosmic Challenge
Trigger Commissioning• Realistic plan in place starting with USC55 occupancy in December• Operation with downloaded simulated data in USC55• Orderly connection and checkout with subsystems, central systems• Operations & testing w/o beam (downloaded & cosmic) planned until
startup• Use of single beams for halo muon triggers & beam-gas events
Plan developed for first data run operations• 5 Phases:
• synchronization & testing, technical validation of data transport, data content validation, data physics evaluation, physics feedback
• Totally open trigger menu & test triggers