reg-2007

15
8/6/2019 reg-2007 http://slidepdf.com/reader/full/reg-2007 1/15 POST GRADUATE PROGRAMMES THROUGH MODULAR BASED CREDIT BANKING SCHEME SPECIAL REGULATIONS - 2007 (Applicable only to Teaching Faculties in Technical Institutions) Special Regulations for P.G. Programmes through Modular Based Credit Banking Scheme effective from the academic year 2007- 2008. 1. PRELIMINARY DEFINITIONS AND NOMENCLATURE In these Regulations, unless the context otherwise requires: i. “Programme” means Post Graduate Degree Programme M.E. (Structural Engineering, Thermal Engineering, Power Systems Engineering, Embedded System Technologies, Communication Systems, Computer Science and Engineering and Pervasive Computing Technologies) through Modular Based Credit Banking scheme. ii. “Specialization” means the discipline of the Post Graduate Degree Programme. iii. “Course” means a Theory or Practical subject that is normally offered in a semester like Pervasive Computing, Information Security etc. iv. Nodal Centre” means the College / Institution that facilitates the infrastructure to the candidates of Anna University Tiruchirappalli for the conduct of the programme. v. “Chief Coordinator” means the senior faculty nominated by the authorities of ANNA UNIVERSITY TIRUCHIRAPPALLI to monitor and implement the programme offered through Modular Based Credit Banking scheme. vi. “Nodal Coordinator” means the Head of the Nodal Centre who will be assisting the Anna University Tiruchirappalli in the smooth conduct of the programme. vii. “Course Coordinator” means the senior faculty nominated by the authorities of ANNA UNIVERSITY TIRUCHIRAPPALLI to organize and to monitor the progress of the courses offered and to be the default member of the class committee. viii. "University" means ANNA UNIVERSITY TIRUCHIRAPPALLI. 

Upload: arun-sudarshan

Post on 07-Apr-2018

214 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: reg-2007

8/6/2019 reg-2007

http://slidepdf.com/reader/full/reg-2007 1/15

POST GRADUATE PROGRAMMESTHROUGH

MODULAR BASED CREDIT BANKING SCHEME 

SPECIAL REGULATIONS - 2007 (Applicable only to Teaching Faculties in Technical Institutions)

Special Regulations for P.G. Programmes through Modular Based CreditBanking Scheme effective from the academic year 2007- 2008.

1. PRELIMINARY DEFINITIONS AND NOMENCLATURE

In these Regulations, unless the context otherwise requires:

i. “Programme” means Post Graduate Degree ProgrammeM.E. (Structural Engineering, Thermal Engineering, Power Systems

Engineering, Embedded System Technologies, Communication Systems,Computer Science and Engineering and Pervasive ComputingTechnologies) through Modular Based Credit Banking scheme.

ii. “Specialization” means the discipline of the Post Graduate DegreeProgramme.

iii. “Course” means a Theory or Practical subject that is normally offered in asemester like Pervasive Computing, Information Security etc.

iv. “Nodal Centre” means the College / Institution that facilitates the

infrastructure to the candidates of Anna University Tiruchirappalli for theconduct of the programme. 

v. “Chief Coordinator” means the senior faculty nominated by theauthorities of ANNA UNIVERSITY TIRUCHIRAPPALLI to monitor andimplement the programme offered through Modular Based Credit Bankingscheme.

vi. “Nodal Coordinator” means the Head of the Nodal Centre who will beassisting the Anna University Tiruchirappalli in the smooth conduct of theprogramme.

vii. “Course Coordinator” means the senior faculty nominated by theauthorities of ANNA UNIVERSITY TIRUCHIRAPPALLI to organize and tomonitor the progress of the courses offered and to be the default memberof the class committee.

viii. "University" means ANNA UNIVERSITY TIRUCHIRAPPALLI. 

Page 2: reg-2007

8/6/2019 reg-2007

http://slidepdf.com/reader/full/reg-2007 2/15

 2. PROGRAMMES OFFERED, MODES OF STUDY AND ADMISSION

REQUIREMENTS

2.1 P.G. PROGRAMMES OFFERED M.E. Programmes through Modular Based Credit Banking Scheme for aminimum duration of 3 years (6-semesters)

• M.E. (Structural Engineering)

• M.E. (Thermal Engineering)

• M.E. (Power Systems Engineering)• M.E. (Embedded System Technologies)

• M.E. (Applied Electronics)• M.E. (Communication Systems)

• M.E. (Computer Science and Engineering)

• M.E. (Software Engineering)

• M.E. (Systems Engineering and Operations Research)

• M.E. (Aeronautical Engineering)

2.2. MODES OF STUDY

The candidates selected for the M.E. Programme under the credit-bankingscheme shall credit the courses through the following modes of study

• Part-Time-Day-Time (PTDT)• CD-based Instruction and Content (CDIC)

• Faculty Development Programme (FDP)

The course contents are made available in the form of CDs.

2.2.1 Part-Time-Day-Time (PTDT)

In this mode of study, the candidates are required to attend classes as perthe academic schedule prepared by Anna University Tiruchirappalli.

2.2.2 CD based Instruction and Content (CDIC)

In this mode of study, all the instructions and course contents will beprovided in CDs to candidates periodically. CDIC mode of study offers the

contents for the courses through CDs that keeps the programme in pace.

2.2.3 Faculty Development Programme (FDP)

In this mode of study, the candidates are required to attend classes,offered through FDP as per the academic schedule prepared by the ChiefCoordinator of this programme in consultation with the Nodal Coordinatorsand Course Coordinators.

Page 3: reg-2007

8/6/2019 reg-2007

http://slidepdf.com/reader/full/reg-2007 3/15

The mode of conducting the Faculty Development Programme is asfollows.

SEMESTERFDP

(DAYS)

I 10

II 9

III 9

IV 10

V 6

2.3 ADMISSION REQUIREMENTS

2.3.1 Candidates for admission to the first semester of the M.E. programmethrough Modular Based Credit Banking Scheme shall be required to havepassed an appropriate Degree Examination of Anna University asspecified in Table-1 or any other examination of any recognized Universityor authority accepted by the Syndicate of Anna University Tiruchirappallias equivalent thereto.

2.3.1.1 In addition to that (as per the special regulations) candidates foradmission shall be teachers working in any of the recognizedTechnical Institution of Tamil Nadu with a minimum of one yearteaching experience.

2.3.1.2 The selection for admission to this programme is based on thepercentage of marks / grade point average scored  and thenumber of years of teaching experience.

2.3.1.3 The enrollment to this programme ceases automatically if thecandidate quits the teaching job from the Technical Institution.

2.3.2 However, the Syndicate of the University may decide to restrict admissionin any particular year to candidates having a subset of qualificationsprescribed in Table -1.

2.3.3 Not withstanding the qualifying examination the candidate might havepassed, he / she shall have a minimum level of proficiency in theappropriate programme / courses as prescribed by the Syndicate of theUniversity from time to time.

Page 4: reg-2007

8/6/2019 reg-2007

http://slidepdf.com/reader/full/reg-2007 4/15

2.3.4 Eligibility conditions for admission such as class obtained, number ofattempts in qualifying examination and physical fitness will be asprescribed by the Syndicate of the University from time to time.

2.3.5 Candidates should satisfy other conditions regarding experience;Sponsorship etc. as prescribed by the Syndicate from time to time.

2.3.6 The admission for this programme will be done by “The Director(Admissions)”, Anna University Tiruchirappalli.

2.3.7 Every semester, the candidate must forward the registration / enrollmentform to the Chief coordinator through the Head of the Institution, in whichhe / she is currently working.

2.3.8 The candidate has to register all the courses prescribed for the particularsemester. Cancellation of registration is applicable only when the requestis made within two weeks from the time of admission. Cancellation andrefund of fee will be carried out as per the rules of

Anna University Tiruchirappalli.

2.3.9 The candidates admitted to this programme are deemed to be thestudents of Anna University Tiruchirappalli.

2.3.10 Students admitted under this programme are governed by the Regulationsin force.

2.3.11 A candidate seeking admission to this programme, shall be allotted to thenearest nodal centre.

3. DURATION AND STRUCTURE OF THE P.G. PROGRAMME

3.1 The minimum and maximum period for completion of this P.G. DegreeProgramme is 6 semesters and 14 semesters respectively.

3.2 The P.G. Programme will consist of core courses elective courses project work

The Programme will also include projects / seminars / practicals / practicaltraining, if they are specified in the Curriculum.

3.3 The Curriculum and Syllabi of this P.G. Programme shall be approved bythe Board of Studies, Anna University Tiruchirappalli.

Page 5: reg-2007

8/6/2019 reg-2007

http://slidepdf.com/reader/full/reg-2007 5/15

3.4 The number of credits to be earned for the successful completion of theprogramme shall be as specified in the Curriculum.

3.5 The Faculty Development Programme may be conducted once in asemester with a minimum duration of 6 working days and a maximumduration of 10 working days based on the number of credits of therespective semester. The morning session shall have 4 hours andafternoon session shall have 3 hours, of instructions.

3.6 The electives from the curriculum are to be chosen with the approval ofthe Nodal Coordinator.

3.7 Project work

3.7.1 Project work shall be carried out under the supervision of a qualifiedteacher in the concerned department of the Nodal Centre or prescribed bythe Nodal Coordinator.

3.7.2 A candidate may, however, in certain cases be permitted to work on theproject in an Industrial / Research Organization on the recommendation ofthe Nodal Coordinator. In such cases, supervisor of the department andan expert from Industry / Research organization shall jointly supervise theProject work and the candidate shall be instructed to meet the supervisorperiodically and to attend the review committee meetings for evaluatingthe progress.

3.7.3 The Project work of the programme during Phase-I shall be evaluatedthrough continuous assessment and viva-voce at the end of Phase-I.

3.7.4 The Project work (Phase-II) shall be pursued for a minimum of 16 weeksduring the final semester.

3.7.5 Two project review meetings shall be conducted at the Nodal Centre andprojects are to be evaluated by a three-member project committeeconstituted by Nodal Coordinator. The report on evaluation shall be sentperiodically to the Chief Coordinator.

3.7.6 The evaluation of the Project work will be based on the project report anda viva-voce Examination by a team consisting of the Supervisor, acommon Internal Examiner and a common External Examiner. The

weightage will be 50% for internal assessment, 20% for project report and30% for the viva-voce examination.

3.7.7 The project report shall be prepared according to the guidelines approvedby Anna University Tiruchirappalli, duly signed by the supervisor(s) andthe Nodal Coordinator and shall be submitted to the Chief Coordinator.

3.7.8 If a candidate fails to submit the project report on or before the specifieddeadline, he / she is deemed to have failed in the Project Work and shall

Page 6: reg-2007

8/6/2019 reg-2007

http://slidepdf.com/reader/full/reg-2007 6/15

re-enroll the same in a subsequent semester. This applies to both Phase–Iand Phase–II.

3.7.9 A candidate who has acquired the minimum number of total creditsprescribed in the Curriculum for the award of the Masters Degree will notbe permitted to enroll for more courses to improve his / her cumulativegrade point average.

3.7.10 The medium of instruction, examination, seminar and project / thesis / dissertation reports will be in English.

4. NODAL CENTRES

In order to provide individual support to the learners, the UniversityAuthorities shall create various nodal centres. These centres are thecontact points for the students on all the major aspects of the programme.These include counseling sessions, practical, library facilities,

disseminating information and facilities for audio-visual training aids. TheNodal Centres are also equipped with books on the subjects of theprogramme and the books will be accessible to the students during theirvisits to the Nodal Centres. All the important communications will be sentto the Nodal Coordinators. The Nodal Coordinators would display a copyof such important circulars / notifications on the notice board of the NodalCentre / Web for the benefit of all the students. The Nodal Coordinatorsare required to provide advance information about assignments,submission of examination forms, list of students admitted to a particularexamination, project work related details, declaration of results and thelike.

5. NODAL COORDINATOR 

The Nodal Coordinator helps the students in pursuing their coursesof study and provides general advices on the academic programmes. TheNodal Coordinator shall periodically monitor the courses taken by thestudents, check the attendance and progress of the students attached tothe centre. The Nodal Coordinator is expected to submit periodicalprogress report about the students and implementation details to the ChiefCoordinator.

6. 

COURSE COORDINATOR 

Each common theory course offered to more than one NodalCentre shall have a “Course Coordinator” among all the teachers teachingthe common course in different Nodal Centres. The Course Coordinatorshall be nominated by the Chief Coordinator.

Page 7: reg-2007

8/6/2019 reg-2007

http://slidepdf.com/reader/full/reg-2007 7/15

7. CLASS COMMITTEE

7.1 A class committee, consisting of Course Coordinators, Studentrepresentative and a Chairperson who is not teaching the class, is constitutedby the Chief Coordinator. The Nodal Coordinator may participate in the classcommittee.

The functions of the class committee include

• Resolving academic issues experienced by students in the class room andin the laboratories.

• Clarifying the regulations of the degree programme and the details of rulestherein.

• Informing the student representatives the academic schedule including thenumber of assessments, their schedules and the syllabus coverage foreach assessment.

• Informing the student representatives the details of regulations regardingthe weightage used for each assessment. In the case of practical courses(Laboratory / project work / seminar etc.) the breakup of marks for eachexperiment / exercise / module of work, should be clearly discussed in theclass committee meeting and informed to the students.

• Analyzing the performance of the students of the class after each test andfinding the ways and means of solving problems, if any.

7.2 The Nodal coordinator is required to prepare the minutes of everymeeting, submit the same to the Chief Coordinator within two days of themeeting and arrange to circulate among the concerned students andteachers. If there are some points in the minutes requiring action by theChief Coordinator, the same shall be brought to the notice of the ChiefCoordinator by the Nodal Coordinator.

7.3 The first meeting of the class committee shall be held within one weekfrom the date of commencement of the semester, in order to inform thestudents about the nature and weightage of assessments within theframework of the Regulations. Two or three subsequent meetings may beheld at suitable intervals. During these meetings the student membersrepresenting the entire class, shall meaningfully interact and express theopinions and suggestions of the class students to improve theeffectiveness of the teaching-learning process.

8. PROCEDURES FOR AWARDING MARKS FOR INTERNALASSESSMENT

8.1 Every teacher is required to maintain ‘ATTENDANCE ANDASSESSMENT RECORD' which consists of attendance marked in eachlecture or practical or project work class, the test marks and the record of

Page 8: reg-2007

8/6/2019 reg-2007

http://slidepdf.com/reader/full/reg-2007 8/15

class work (topic covered), separately for each course. This should besubmitted to the Nodal Coordinator periodically for checking the syllabuscoverage and the records of test marks and attendance. The nodalcoordinator shall put his signature and date after due verification. At theend of the semester, the record should be verified by the ChiefCoordinator who will keep this document in safe custody (for five years).The University or any inspection team appointed by the University mayscrutinize the records of attendance and assessment of both current andprevious semesters.

8.2 Theory Courses

Two tests each carrying 100 marks shall be conducted by the NodalCentre. The total marks obtained in both tests put together, shall bereduced to 20 marks and rounded to the nearest integer.

8.3 Practical Courses

Every practical exercise / experiment shall be evaluated based on conductof experiment / exercise and records maintained. There shall be at leastone mid-semester test. The criteria for arriving at the internal assessmentmarks shall be decided by the Nodal Coordinator / Course Coordinatorand shall be announced at the beginning of every semester.

8.4 Theory Courses with Laboratory Component

If there is a theory course with Laboratory component,  the mode ofassessment will be decided by the Nodal Coordinator / CourseCoordinator in consultation with the Chief Coordinator.

8.5 The maximum marks for each theory course shall be 100 comprising of 20marks for internal assessment and 80 marks for the end-semesterexamination. The maximum marks for each practical course shall be 100comprising of 20 marks for internal assessment and 80 marks for end-semester examination.

8.6 Project Work

There shall be two assessments (each 100 marks) during the semester bya review committee. The student shall make presentation on the progress

made before the committee. The Nodal Coordinator shall constitute thereview committee. The total marks obtained in the assessments shall bereduced to 50 marks and rounded to the nearest integer. This procedureapplies to both Phase-I and Phase-II of Project work.

Page 9: reg-2007

8/6/2019 reg-2007

http://slidepdf.com/reader/full/reg-2007 9/15

9. MINIMUM REQUIREMENTS TO DO PROJECT

9.1 A candidate is permitted to enroll the project work if he / she has earnedthe minimum number of 27 credits.

9.2 If the candidate has not earned the requisite minimum credits, he / she hasto complete the arrears (at least to the extent of earning the minimumcredits specified) and then enroll for the project work in the subsequentsemester.

9.3 In case of candidates not completing Phase-I of project work successfully,the candidates can undertake Phase-I again in the next semester. In suchcases, the candidates can enroll for Phase-II only after successfulcompletion of Phase-I.

10. REQUIREMENTS FOR COMPLETION OF A SEMESTER

A candidate who has fulfilled the following conditions shall be deemed tohave satisfied the requirements for completion of a semester.

10.1 Ideally every student is expected to attend all classes and secure 100%attendance. However, in order to allow for certain unavoidable reasonssuch as medical / personal, the student is expected to attend at least 90%of classes including FDP.

10.2 However, a candidate who could secure attendance between 75% andabove and less than 90% in the current semester due to medical reasons

(hospitalization / accident / specific illness) with prior permission from the

Nodal Co-ordinator shall be given exemption from the prescribedattendance requirement and he / she shall be permitted to appear for thecurrent semester examination.

10.3 Candidates who do not meet the above requirements will not be permittedto write the end-semester examination and are not permitted to go to nextsemester. They are required to repeat the incomplete semester in the nextacademic year.

11. REQUIRMENTS FOR APPEARING FOR END-SEMESTEREXAMINATION

A candidate shall normally be permitted to appear for the end-semesterexamination of the current semester if he / she has satisfied the semestercompletion requirements (vide Clause 10) and has enrolled forexamination in all courses of that semester, as well as the arrears of theprevious semesters.

Page 10: reg-2007

8/6/2019 reg-2007

http://slidepdf.com/reader/full/reg-2007 10/15

12. END-SEMESTER EXAMINATIONS

The examinations shall normally be conducted between October andDecember during the odd semesters and between March and May in theeven semesters.

12.1 There shall be one end-semester examination of 3 hours duration in eachlecture based course and practical course.

12.2 The evaluation of the Project work will be based on the project report and aViva-Voce Examination by a team consisting of the supervisor, a commoninternal examiner and an external examiner.

12.3 If a student indulges in any malpractice during tests / examinations, thestudent shall be liable for punitive action as prescribed by the Universityfrom time to time.

12.4 For practical examinations (including project work) both internal and

external examiners shall be appointed by the Controller of Examinations.

13. PASSING REQUIRMENTS

13.1 A Candidate who secures the letter grade other than ‘U’, ‘I’ and ‘W’ in thecourse(s) shall be declared to have passed in the course(s).

13.1.1 If a candidate fails to secure a pass in a particular course it is mandatorythat he / she shall register and reappear for the examination in that courseduring the next semester when examination is conducted in that course;he / she should continue to register and reappear for the examination till

he / she secures a pass. However, the internal assessment marksobtained by the candidate in the first attempt shall be retained andconsidered valid for all subsequent appearances.

13.1.2 Candidates who had failed and earned poor internal assessment marks ina course, may be permitted, if they make a request to the ChiefCoordinator through the Nodal coordinator to enroll, on payment ofprescribed fees, and re-do such a course along with the regular class of

 juniors, as and when it is offered to juniors. The fresh internal assessmentmarks so earned will only be taken for all subsequent semesterexaminations. Candidates have to secure a minimum attendance of 90%

course wise, while redoing; otherwise redoing of the course will becomeinvalid.

14. WEIGHTAGES

The following will be the weightages for different courses.

i) Lecture or Lecture cum Tutorial based courseInternal Assessments - 20%

Page 11: reg-2007

8/6/2019 reg-2007

http://slidepdf.com/reader/full/reg-2007 11/15

Semester Examination - 80%

ii) Laboratory based coursesInternal Assessment - 20%Semester Examination - 80%

iii) Project workInternal Assessment - 50%

Evaluation of Project ReportBy external examiner - 20%

Viva-Voce Examination - 30%

15. AWARD OF LETTER GRADES

15.1 All assessments of a course will be done on absolute marks basis.However, for the purpose of reporting the performance of a candidate,

letter grades, each carrying certain points, will be awarded as per therange of total marks (out of 100) obtained by the candidate, as detailedbelow:

Letter grade Grade PointsRange of 

Marks

S 10 90 – 100

A 9 80 – 89

B 8 70 – 79

C 7 60 – 69

D 6 56 – 59

E 5 50 – 55

U 0 < 50

I 0

W 0

The range of marks shall be slightly modified if required as per the classcommittee recommendations, however, the letter grade ‘S’ is fixed for the marksrange 90 – 100.

The letter grade

“U” denotes failure in the course.

Page 12: reg-2007

8/6/2019 reg-2007

http://slidepdf.com/reader/full/reg-2007 12/15

“I” denotes incomplete as per clause 10 and henceprevented from writing semester examination.

“W” denotes withdrawal from the course.

After results are declared, Grade Sheets will be issued to each student,which will contain the following details:

The list of courses enrolled during the semester and the grade scored.The Grade Point Average (GPA) for the semester and the CumulativeGrade Point Average (CGPA) of all courses enrolled from first semesteronwards.

GPA is the ratio of the sum of the products of the number of credits ofcourses enrolled and the points corresponding to the grades scored inthose courses, taken for all the courses, to the sum of the number ofcredits of all the courses in the semester.

Sum of [C * GP]GPA = ______________ 

Sum of C

CGPA will be calculated in a similar manner, considering all the coursesenrolled from first semester. “U”, “I” and “W” grades will be excluded forcalculating GPA and CGPA.

15.2 Whenever regular students are not there and only arrears students takeup the examinations, the letter grades will be awarded based on the rangeof marks used in the immediately preceding end-semester examinations.

16. ELIGIBILITY FOR THE AWARD OF THE DEGREE

16.1 A candidate shall be declared to be eligible for the award of the Degree ifhe / she has

o Successfully acquired the required credits as specified in theCurriculum corresponding to this programme within the stipulatedtime.

o No disciplinary action is pending against him / her.

16.2 The Syndicate must approve the award of the degree.

17. CLASSIFICATION OF THE DEGREE AWARDED

17.1 A candidate who qualifies for the award of the Degree (vide clause 16) having passed the examination in all the courses in his / her firstappearance within the specified minimum number of semesters securing a

Page 13: reg-2007

8/6/2019 reg-2007

http://slidepdf.com/reader/full/reg-2007 13/15

CGPA of not less than 8.50 shall be declared to have passed theexamination in First Class with Distinction. For this purpose the withdrawalfrom examination (vide clause 18) will not be construed as an appearance.Further, the authorized break of study (vide clause19) will not be countedfor the purpose of classification.

17.2 A candidate who qualifies for the award of the Degree (vide clause 16)having passed the examination in all the courses within the specifiedminimum number of semesters plus one year (two semesters), securing aCGPA of not less than 6.50 shall be declared to have passed theexamination in First Class. For this purpose the authorized break of study(vide clause 19) will not be counted for the purpose of classification.

17.3 All other candidates (not covered in clauses 17.1 and 17.2) who qualify forthe award of the degree (vide Clause 16) shall be declared to havepassed the examination in Second Class.

17.4 A candidate who is absent in semester examination in a course / project

work after having enrolled for the same shall be considered to haveappeared in that examination for the purpose of classification.

17.5 A candidate can apply for revaluation of his / her semester examinationanswer paper in a theory course, within 2 weeks from the declaration ofresults, on payment of a prescribed fee through proper application to theController of Examinations through the Nodal Co-ordinator. The Controllerof Examination will arrange for the revaluation and the results will beintimated to the candidate concerned through the Nodal Co-ordinator.Revaluation is not permitted for practical courses, and project work.

18. PROVISION FOR WITHDRAWAL FROM EXAMINATION

A candidate may, for valid medical reasons, be granted permission towithdraw from appearing for any course or courses of only one semesterexamination during the entire duration of the degree programme. Also onlyone application for withdrawal is permitted for that semester examinationin which withdrawal is sought.

Withdrawal of application for examination shall be valid only if thecandidate is otherwise eligible to write the examination and if it is madewithin the prescribed number of days prior to the commencement of the

examination in that course or courses and also recommended by theNodal Coordinator.

Withdrawal shall not be construed as an appearance for the eligibility of acandidate for First Class with Distinction.

Page 14: reg-2007

8/6/2019 reg-2007

http://slidepdf.com/reader/full/reg-2007 14/15

19. TEMPORARY BREAK OF STUDY FROM A PROGRAMME

19.1 A candidate is not normally permitted to temporarily break the study.However if a candidate intends to temporarily discontinue the programmein the middle for valid reasons and to rejoin the programme in a latersemester, he / she shall apply to the Chief Coordinator of this programmein advance, in any case, not later than the last date for enrolling for thesemester examinations of the semester, through the NodalCoordinator, stating the reasons therefore. 

19.2 The candidate permitted to rejoin the programme after the break shall begoverned by the rules and regulations in force at the time of rejoining.

19.3 The authorized break of study will not be counted for the durationspecified for passing all the courses for the purpose of classification videClause 17.1 and 17.2.

19.4 The total period for completion of the programme reckoned from the

commencement of the first semester to which the candidate was admittedshall not exceed the maximum period specified in Clause 3 irrespective ofthe period of break of study in order that he / she may be eligible for theaward of the degree (vide Clause 16).

19.5 If any student is detained for want of requisite attendance, progress andgood conduct, the period spent in that semester shall not be consideredas permitted ‘Break of Study’ and Clause 19.3 is not applicable for thiscase.

20. DISCIPLINE

Every candidate is required to observe disciplined and decorous behaviorboth inside and outside the Nodal Centre and not to indulge in any activitywhich will tend to bring down the prestige of the University / Nodal Centre.In the event of an act of indiscipline being reported, the Chief Coordinatorof this programme shall constitute a disciplinary committee consisting ofsenior faculty to inquire into the acts of indiscipline and to recommendsuitable disciplinary action for approval and implementation.

21. REVISION OF REGULATION AND CURRICULUM

The University may from time to time revise, amend or change theRegulations, scheme of examinations and syllabi, if found necessary.

Page 15: reg-2007

8/6/2019 reg-2007

http://slidepdf.com/reader/full/reg-2007 15/15

T A B L E – 1

SL.NO.

P.G. PROGRAMME OFFERED QUALIFICATION  FOR ADMISSION

1 M.E. ( Structural Engineering)B.E. / B.Tech. in Civil Engineering

2 M.E. ( Thermal Engineering)B.E. / B.Tech ( Mech / Production / Auto / Metallurgical / Aeronautical / Mechatronics / Marine / Industrial / Manufacturing)

3 M.E. ( Power Systems Engineering)B.E. / B.Tech (EEE / I&C)

4M.E. (Embedded SystemTechnologies)

B.E. (EEE / ECE / CSE / IT / I & C / E & I)B.Tech (IT / Electronics / Instrumentation)

5 M.E. (Applied Electronics)B.E. / B.Tech. (EEE / ECE / E&I / Electronics

 / Instrumentation)

6 M.E. ( Communication Systems) B.E. / B.Tech (ECE / Electronics / E & I) 

7M.E. (Computer Science andEngineering )

B.E. / B.Tech. ( EEE / ECE / Electronics / CS / E & I / I & C / Instrumentation / IT)

OR

M.Sc. (2years / 5years) Software / IT / Computer Technology / CS / ComputerElectronics

OR

M.C.A.

8 M.E. (Software Engineering)B.E. / B.Tech. (Computer Science andEngineering / IT)

9M.E. (Systems Engineering andOperations Research)

B.E. / B.Tech. (Any branch)

ORM.Sc (Maths, Physics, Statistics / CS / IT / Software Engineering)

ORMCA

10 M.E. (Aeronautical Engineering)B.E. / B.Tech. (Aeronautical / Mechanical / Civil / Mechatronics)