reflective) binding)at))...reflective) binding)at)) / armholes) / hem) / neck) coil)zipperfor...

6

Upload: others

Post on 12-Jan-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: REFLECTIVE) BINDING)AT))...REFLECTIVE) BINDING)AT)) / ARMHOLES) / HEM) / NECK) COIL)ZIPPERFOR CLOSURE)AT)FRONT)) SEALED)HYDROGEL) COOLPANEL(S))FRONT)&) BACK)SIDE)) REFLECTIVE) TAPING)AT
Page 2: REFLECTIVE) BINDING)AT))...REFLECTIVE) BINDING)AT)) / ARMHOLES) / HEM) / NECK) COIL)ZIPPERFOR CLOSURE)AT)FRONT)) SEALED)HYDROGEL) COOLPANEL(S))FRONT)&) BACK)SIDE)) REFLECTIVE) TAPING)AT

REFLECTIVE  BINDING  AT    -­‐  ARMHOLES  -­‐  HEM    -­‐  NECK    

COIL  ZIPPER  FOR  CLOSURE  AT  FRONT  

 

SEALED  HYDROGEL  COOLPANEL(S)  FRONT  &  

BACK  SIDE    

REFLECTIVE  TAPING  AT    -­‐  FRONT  -­‐  BACK  FOR  VISBILITY    

MATERIALS  USED  :    SHELL  FABRIC    WOVEN  POLYESTER,  85  GRMS.    ADDITIONAL    REFLECTIVE  TAPING  FRONT  AND  BACK      

 

ADJUSTABLE  PATCHES  

AT  BOTH  WAIST  SIDES    

ADJUSTABILITY  WITH  VELCRO  

Page 3: REFLECTIVE) BINDING)AT))...REFLECTIVE) BINDING)AT)) / ARMHOLES) / HEM) / NECK) COIL)ZIPPERFOR CLOSURE)AT)FRONT)) SEALED)HYDROGEL) COOLPANEL(S))FRONT)&) BACK)SIDE)) REFLECTIVE) TAPING)AT

APPLICATION  :        The  FELTEST  Cooling  Vest  is  an  ideal  soluOon  for  employees  who  occasionally  work  in  (extreme)  heat.  This  applies  especially  to:    q   employees  in  companies  which  generate  heat  producOon  (blast  furnaces,  paper  factories,  green-­‐houses...)  q   employees  in  buildings  with  poor  climate  control,  performing  heavy    work  in  hot  condiOons    (for  example  in  some  kitchens)  q   employees  in  transport  without  proper  air-­‐condiOoning  q   workers  in  the  open  air  

FEATURES  OF  YOUR  COOLING  PRODUCT  :    WEIGHT      250  GRMS.  (DRY)  

   2.200  GRMS.  (ACTIVATED)  COOLING  TIME      APPROX.  72  HOURS  EVAPORATED  COOLING  DEPENDING  

       ON  :  TEMPERATURE  ,  HUMIDITY  &  VENTILATION          APPROX.  3  HOURS  AS  ICE  VEST    (CAN  BE  USED  UNDER          WORKWEAR)  

COOLING  METHOD  EVAPORATION  AND  ICE  FITTING      BODY  CONSCIOUS  SUITABLE  FOR    SPORTS  ,  MEDICAL  ,  INDUSTRIAL  AVAILABLE  SIZES  Size  1  =  S  –  M  ,  size  2  =  L  -­‐  XL  

Page 4: REFLECTIVE) BINDING)AT))...REFLECTIVE) BINDING)AT)) / ARMHOLES) / HEM) / NECK) COIL)ZIPPERFOR CLOSURE)AT)FRONT)) SEALED)HYDROGEL) COOLPANEL(S))FRONT)&) BACK)SIDE)) REFLECTIVE) TAPING)AT

The  FELTEST  Hydrogel  Cooling  vest  provides    effecOve  cooling  to  the  worker  subjected  to    potenOal  heat  stress.      q   with  drop  in  skin  temperature.  q   with  drop  in  core  body  temperature  q   improvement  in  perceived  comfort  level      The  FELTEST  Hydrogel  Cooling  vest  is  an  ef-­‐  fecOve  and  convenient  method  to:      q   Protect  the  employee's  health    q   Increase  the  producOvity  q   Raise  the  concentraOon  level  q   Improve  the  labour  condiOons  

This  due  is  to  the  fact  that  the  FELTEST  Hydrogel  Cooling  vest  :    

q   has  a  superior  comfort  level  when  wearing  q   is  easy  to  acOvate  q   can  hold  cooling  for  extended  periods  

 

Page 5: REFLECTIVE) BINDING)AT))...REFLECTIVE) BINDING)AT)) / ARMHOLES) / HEM) / NECK) COIL)ZIPPERFOR CLOSURE)AT)FRONT)) SEALED)HYDROGEL) COOLPANEL(S))FRONT)&) BACK)SIDE)) REFLECTIVE) TAPING)AT

1.  soak  in  water  (30    MINUTES)  

2.  Wring  out  gently    

3.  ready  to  use    4.  Hang  in  a  venOlated    SPACE  for  drying  (30    MINUTES)    

STEPS  FOR  ACTIVATION  

   

Ac#va#on  steps    :    

                     1.    Soak  in  cold  water  for  about  30  minutes  (the  hydrogel  grains    start  swelling)  

                       NOTE  :  do  not  use  salted  water  as  salt  damages  the  hydrogel    grains    2.      Wring  out  the  acOvated  garment  gently  OR  wrap  in  a  towel    

                   3.      Let  the  garment  dry  hanging  for  30  minutes  in  any  venOlated    space    4.    The  garment  is  ready  to  be  used  !      When  the  Hydrogel  in  the  vest  is  dry  (hard  grains),  repeat  steps    1  Oll  3  

                   Wearing  the  clothes    :                      The  clothing  is  cooled  by  evaporaOon  (cools  down  to  7°C  relaOve  

 to  the  environment  temperature).  For  addiOonal  cooling  follow    below  2  opOons  :      1.  hydrogel  clothing  can  be  placed  in  the  refrigerator  for  extra    cooling.  The  clothing  will  provide  maximum  30  minutes  of  extra    intense  cooling  and  conOnues  cooling  by  evaporaOon  .      2.  More  intense  cooling  >  aker  acOvaOon  the  clothes  can  be    placed  in  the  freezer  during  the  night.  The  clothing  will  provide  2    to  3  hours  of  addiOonal  intense  cooling  as  the  hydrogel  has    turned  into  ice  and  will  melt  ;  aker  this,  it  will  cool  by  evapora-­‐  Oon.  Ideal  when  wearing  the  cooling  garment  under  work  wear  !  

 Deac#va#ng  the  clothes    :    

                     -­‐  Allow  the  garment  to  completely  ‘evaporate’,  so  no  more    water  is  present    in  the  clothing.  You  will  feel  when  the  sok    hydrogel  is  transformed  into  hard  grains.  

                     -­‐  Store  the  clothes  in  a  dry,  cool  &  venOlated  area  

Maintenance  of  the  clothes    :      

                     -­‐  Wash  clothing  and  accessories  by  hand  with  mild  (green)  soap    in  lukewarm  water  .  DO  NOT  use  a  washing  machine!  

     

                     -­‐  Aker  washing,  hang  clothes  to  dry  in  a    cool  &  well-­‐venOlated    area  

     

FREEZING  Hydrogel  products    

Do  NOT  roll  the  cooling  product.  Lay  flat  or  ½  folded    in  the  freezer  

   

Page 6: REFLECTIVE) BINDING)AT))...REFLECTIVE) BINDING)AT)) / ARMHOLES) / HEM) / NECK) COIL)ZIPPERFOR CLOSURE)AT)FRONT)) SEALED)HYDROGEL) COOLPANEL(S))FRONT)&) BACK)SIDE)) REFLECTIVE) TAPING)AT

TEMPERATURE  &  HUMIDITY  CONDITIONS  

COOLING  PROCESS  by  EVAPORATION  

The    impact  of    evaporaOve    cooling  is  Inversely  related  to  the  relaOve  humi-­‐  dity  and  venOlaOon.    At  high  humidity  and  low    venOlaOon,  evaporaOve  coo-­‐  ling  will  be  less  effecOve.    FELTEST    proprietary  Hydrogel©  tech-­‐  nology    basically    mimics  the  sweaOng  Process.    Sweat  contains    water  which  evapora-­‐  tes    at  the  skin,  which  extracts  energy  in    the  form  of    heat.  This    is    what    we  call  evaporaOve  cooling.