references - shodhganga : a reservoir of indian theses...
TRANSCRIPT
References
179
REFERENCES
[1] R. Schaumann, M. S. Ghausi, K. R. Laker, Design of analog filters: passive, active RC
and switched capacitor, Prentice-Hall, Englewood cliffs, New Jersey, 1981.
[2] A. S. Sedra and P. O. Brackett, Filter Theory and Design: Active and Passive, Matrix
Series in Circuits and Systems, Matrix Publishers, 1978.
[3] P. V. Ananda Mohan, Current-mode VLSI Analog Filters: Design and Applications,
Birkhauser, 2003.
[4] T. Deliyannis, Y. Sun, J. K. Fidler, Continuous-Time Active Filter Design, CRC
Press, Florida, USA, 1999.
[5] Y. P. Tsividis, J. O. Voorman, Integrated Continuous-Time Filters: Principles, Design,
and Applications, Piscataway, NJ: IEEE Press, 1993.
[6] J. E. Kardontchik, Introduction to the Design of Transconductor-Capacitor Filters,
Kluwer Academic Publishers, Massachusetts, 1992.
[7] C. Toumazou, F. J. Lidgey and D. G. Haigh, Analogue IC Design: The Current-Mode
Approach, Peter Peregrinus, London, 1990.
[8] R. Schaumann, Continuous-time Integrated Filters, in the The Circuits and Filters
Handbook, W. K. Chen, Ed., CRC Press, Boca Raton, FL, 1995.
[9] S. Pipilos, Y. P. Tsividis, J. Fenk, Y. Papananos, “A Si 1.8 GHz RLC filter with
tunable center frequency and quality factor,” IEEE Journal of Solid-State Circuits,
vol. 31, no. 10, pp. 1517-1525, 1996.
[10] R. P. Sallen and E. L. Key, “A practical method of designing RC-Active filters,” IEEE
Transactions on Circuit Theory, vol. 2, pp. 74-85, 1955.
[11] T. Deliyannis, “High-Q factor circuit with reduced sensitivity,” Electronics Letters,
vol. 4, no. 26, pp. 577-579, 1968.
[12] J. Friend, C. Harris, D. Hilberman, “STAR: An active biquadratic filter section,”
IEEE Transactions on Circuits and Systems, vol. 22, no. 2, pp. 115-121, 1975.
References
180
[13] L. C. Thomas, “The Biquad: Part I - some practical design considerations,” IEEE
Transactions on Circuit Theory, vol. 18, no. 3, pp. 350-357, 1971.
[14] L. C. Thomas, “The Biquad: Part II - a multipurpose active filtering system,” IEEE
Transactions on Circuits and Systems, vol. 18, no. 3, pp. 358-361, 1971.
[15] W. J. Kerwin, L. P. Huelsman, R. W. Newcomb, “State-variable synthesis for
insensitive integrated circuit transfer functions,” IEEE Journal of Solid-State Circuits,
vol. 2, no. 3, pp. 87-92, 1967.
[16] D. Akerberg, K. Mossberg, “A versatile Active RC building block with inherent
compensation for the finite bandwidth of the amplifier,” IEEE Transactions on
Circuits and Systems, vol. 21 , no. 1, pp. 75-78, 1974.
[17] R. Tarmy and M. S. Ghausi, “Very high Q insensitive Active RC networks,” IEEE
Transactions on Circuit Theory, vol. 17, no. 3, pp. 358-366, 1970.
[18] G. S. Moschytz, “High-Q factor insensitive active RC network similar to the Tarmy-
Ghausi circuit, but using single-ended operational amplifiers,” Electronics Letters, vol.
8, no. 18, pp. 458-459, 1972.
[19] B. B. Bhattacharyya, W. B. Mikhael, A. Antoniou, “Design of RC active networks
using generalized-immittance converters,” Journal of the Franklin Institute, vol. 297,
no. 1, pp. 45–58, 1974.
[20] W. B. Mikhael, B. B. Bhattacharyya, “A practical design for insensitive RC-active
filters,” IEEE Transactions on Circuits and Systems, vol. 22, no. 5, pp. 407-
415, 1975.
[21] P. Padukone, J. Mulawka, M. S. Ghausi, “An active-RC biquadratic section with
reduced sensitivity to operational amplifier imperfections,” Journal of the Franklin
Institute , vol. 30, no. 1, pp. 27-40, 1980.
[22] D. J. Comer, J. E. McDermid, “Inductor less band-pass characteristics using all-pass
networks,” IEEE Transactions on Circuit Theory, vol. 15, no. 4, pp. 501-503, 1968.
[23] J. Mulawka, M. Bialko, “Modifications of Tarmy-Ghausi active filter,” Electronics
Letters, vol. 10, no. 18, pp. 380-381, 1974.
References
181
[24] R. N. G. Dalpadado, “A class of high-Q high-frequency two amplifier Active RC
networks,” IEEE Transactions on Circuits and Systems, vol. 25, no. 12, pp. 1099-
1101, 1978.
[25] D. J. Comer, “High-frequency narrow-band active filters,” IEEE Transactions on
Circuits and Systems, vol. 33, no. 8, pp. 838-840, 1986.
[26] D. T. Comer, D. J. Comer and J. R. Gonzalez, “A high-frequency integrable bandpass
filter configuration,” IEEE Transactions on Circuits and Systems-II: Analog and
Digital Signal Processing, vol. 44, no. 10, pp. 856-861, 1997.
[27] A. Toker, S. Ozoguz, O. Cicekoglu and C. Acar, “Current-mode all-pass filters using
current differencing buffered amplifier and a new high-Q band-pass filter
configuration,” IEEE Transactions on Circuits and Systems-II :Analog and Digital
Signal Processing, vol. 47, no. 9, pp. 949-954, 2000.
[28] P. V. Ananda Mohan, V. Ramachandran and M. N. S. Swamy, “Novel stray-
insensitive SC band-pass filter,” Electronics Letters, vol. 19, no. 16, pp. 615-616,
1983.
[29] D. J. Allstot, R. W. Brodersen and P. R. Gray, “Design techniques for MOS switched
capacitor ladder filters,” IEEE Transactions on Circuits and Systems, vol. 25, no. 12,
pp. 1014-1021, 1978.
[30] M. Yoshihiro, A. Nishihara and T. Yanagisawa, “Low sensitivity active and digital
filters based on the node-voltage simulation of LC ladder structures,” Proceedings of
IEEE International Symposium on Circuits and Systems, pp. 446-449, 1977.
[31] A. M. Durham, J. B. Hughes and W. Redman-White, “Circuit architectures for high
linearity monolithic continuous-time filtering,” IEEE Transactions on Circuits and
Systems-II: Analog and Digital Signal Processing, vol. 39, no. 9, pp. 651-657, 1992.
[32] A. M. Durham, W. Redman-White and J. B. Hughes, “High-linearity continuous-time
filter in 5-V VLSI CMOS,” IEEE Journal of Solid-State Circuits, vol. 27, no. 9, pp.
1270-1276, 1992.
References
182
[33] A. M. Soliman and M. Ismail, “Active compensation of opamps,” IEEE Transactions
on Circuits and Systems, vol. 26, no. 2, pp. 112–117, 1979.
[34] G. Wilson, “Compensation of some operational-amplifier based RC-active networks,”
IEEE Transactions on Circuits and Systems, vol. 23, no. 7, pp. 443-446, 1976.
[35] M. Banu and Y. Tsividis, “Fully integrated Active RC filters in MOS technology,”
IEEE Journal of Solid-State Circuits, vol. 18, no. 6, pp. 644-651, 1983.
[36] P. V. Ananda Mohan, “New structures for MOSFET-C filters,” Proceedings of the
IEEE, vol. 75, no. 7, pp. 957-960, 1987.
[37] A. M. Soliman, M. Fawzy, “A universal active R biquad,” International Journal of
Circuit Theory and Applications, vol. 6, no. 2, pp. 153-157, 1978.
[38] P. V. Ananda Mohan, “Novel active filters using amplifier pole,” Electronics Letters,
vol. 16, no. 10, pp. 378-380, 1980.
[39] J. R. Brand, R. Schaumann, “Active R filters: review of theory and practice,” IEE
Journal on Electronic Circuits and Systems, vol. 2, no. 4 , pp. 89-101, 1978.
[40] K. Radhakrishnarao, S. Srinivasan, “A band-pass filter using the operational amplifier
pole,” IEEE Journal of Solid-State Circuits, vol. 8, no. 3, pp. 245-246, 1973.
[41] T. S. Rathore, “New active-R filters and their design,” IEEE International Symposium
on Circuits and Systems, California, 1983.
[42] S. D’amico and A. Baschirotto, “Active-Gm-RC continuous-time biquadratic cells,”
Analog Integrated Circuits and Signal Processing, vol. 45, no. 3, pp. 281-294, 2005.
[43] S. D'Amico, V. Giannini and A. Baschirotto, “A 4th
-order Active-Gm-RC
reconfigurable (UMTS/WLAN) filter,” IEEE Journal of Solid-State Circuits, vol. 41,
no. 7, pp. 1630-1637, 2006.
[44] P. V. Ananda Mohan, “Comments on “A 4th-order Active-Gm-RC reconfigurable
(UMTS/WLAN) filter,” IEEE Journal of Solid-State Circuits, vol. 42, pp. 457-458,
2007.
References
183
[45] S. D'Amico, V. Giannini, A. Baschirotto, “A 1.2V-21dBm OIP3 4th
-order active-gm-
RC reconfigurable (UMTS/WLAN) filter with on-chip tuning designed with an
automatic tool,” Proceedings of the 31st European Solid-State Circuits Conference,
pp. 315-318, 2005.
[46] M. Bialko, R. W. Newcomb, “Generation of all finite linear circuits using the
integrated DVCCS,” IEEE Transactions on Circuit Theory, vol. 18, pp. 733-736,
1971.
[47] R. L. Geiger and E. Sanchez-Sinencio, “Active filter design using operational
transconductance amplifiers: A tutorial,” IEEE Circuits and Devices Magazine, vol. 1,
pp. 20-32, 1985.
[48] M. E. Robinson, J. Ramirez-Angulo, E. Sanchez-Sinencio, “Current-mode continuous-
time filters: two design approaches,” IEEE Transactions on Circuits and Systems II:
Analog and Digital Signal Processing, vol. 39, no. 6, pp. 337-341, 1992.
[49] P. V. Ananda Mohan, “Generation of OTA-C filter structures from Active RC filter
structures,” IEEE Transactions on Circuits and Systems, vol. 37, no. 5, pp. 656-660,
1990.
[50] P. V. Ananda Mohan, “Novel OTA-C filter structures using grounded capacitors,”
Proceedings of IEEE International Symposium on Circuits and Systems, vol. 3, pp.
1347-1350, 1991.
[51] C. Acar, F. Anday, H. Kuntman, “On the realization of OTA-C filters,” International
Journal of Circuit Theory and Applications, vol. 21, no. 4, pp. 331-341, 1993.
[52] Y. Sun, “Second-order OTA-C filters derived from Nawrocki-Klein biquad,”
Electronics Letters, vol. 34, no. 15, pp. 1449-1450, 1998.
[53] Y. Tao, J. K. Fidler, “Electronically tunable dual-OTA second-order sinusoidal
oscillators/filters with non-interacting controls: a systematic synthesis approach,”
IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications,
vol. 47, no. 2, pp. 117-129, 2000.
References
184
[54] C. M. Chang, B. M. Al-Hashimi, Y. Sun and J. N. Ross, “New high-order filter
structures using only single-ended-input OTAs and grounded capacitors,” IEEE
Transactions on Circuits and Systems II: Express briefs, vol. 51, no. 9, pp. 458-463,
2004.
[55] E. Sanchez-Sinencio, R. L. Geiger and H. Nevarez-Lozano, “Generation of
continuous-time two integrator loop OTA filter structures,” IEEE Transactions on
Circuits and Systems, vol. 35, no. 8, pp. 936-946, 1988.
[56] Y. Sun, “Note on two integrator loop OTA-C configurations,” Electronics Letters, vol.
34, no. 16, pp. 1533-1534, 1998.
[57] M. A. Tan and R. Schaumann, “Simulating general-parameter LC-ladder filters for
monolithic realizations with only transconductance elements and grounded
capacitors,” IEEE Transactions on Circuits and Systems, vol. 36, no. 2, pp. 299-307,
1989.
[58] Y. -S. Hwang, S.-I. Liu, D.-S. Wu and Y.-P. Wu, “Table-based linear transformation
filters using OTA-C techniques,” Electronics Letters, vol. 30, no. 24, pp. 2021-2022,
1994.
[59] L. Yue, N. P. J. Greer and J. I. Sewell, “Efficient design of ladder-based
transconductor-capacitor filters and equalizers,” IEE Proceedings Circuits, Devices
and Systems, vol. 142, no. 4, pp. 263-272, 1995.
[60] Y. Sun, “OTA-C filter design using inductor substitution and Bruton transformation
methods,” Electronics Letters, vol. 34, no. 22, pp. 2082-2083, 1998.
[61] Y. Sun and J. K. Fidler, “Synthesis and performance analysis of universal minimum
component integrator-based IFLF OTA-grounded capacitor filter,” IEE Proceedings
Circuits, Devices and Systems, vol. 143, no. 2, pp. 107-114, 1996.
[62] C. M. Chang, “New multifunction OTA-C biquads,” IEEE Transactions on Circuits
and Systems-II: Analog and Digital Signal Processing, vol. 46, no. 6, pp. 820-824,
1999.
References
185
[63] J. W. Horng, “Voltage-mode universal biquadratic filter with one input and five
outputs using OTAs,” International Journal of Electronics, vol. 89, no. 9, pp. 729-
737, 2002.
[64] C. M. Chang, “Analytical synthesis of the digitally programmable voltage-mode OTA-
C universal biquad,” IEEE Transactions on Circuits and Systems-II: Express briefs,
vol. 53, no. 8, pp. 607-611, 2006.
[65] B. M. Al-Hashimi, “Current-mode filter structure based on dual-output
transconductance amplifiers,” Electronics Letters, vol. 32, no. 1, pp. 25-26, 1996.
[66] T. Tsukutani, Y. Sumi, Y. Fukui, “Electronically tunable current-mode OTA-C biquad
using two-integrator loop structure,” Frequenz, vol. 60, pp. 53-56, 2006.
[67] B. M. Al-Hashimi, F. Dudek, and M. Moniri, and J. Living, “Integrated universal
biquad based on triple output OTAs and using digitally programmable zeros,” IEE
Proceedings Circuits, Devices and Systems, vol. 145, no. 3, pp. 192-196, 1998.
[68] C. M. Chang, B. M. Al-Hashimi, “Analytical synthesis of current-mode high-order
OTA-C filters,” IEEE Transactions on Circuits and Systems-I: Fundamental Theory
and Applications, vol. 50, no. 9, pp. 1188-1192, 2003.
[69] Y. S. Hwang, D. S. Wu, J. J. Chen, W. S Chou, “Realization of current-mode high-
order filters employing multiple output OTAs,” International Journal of Electronics
and Communications (AEÜ), vol. 62, no. 4, pp. 299-303, 2008.
[70] D. R. Bhaskar, A. K. Singh, R. K. Sharma and R. Senani, “New OTA-C universal
current-mode/ transadmittance biquads,” IEICE Electronics Express, vol. 2, no. 1, pp.
8-13, 2005.
[71] Hua-Pin Chen, Yi-Zhen Liao, Wen-Ta Lee, “Tunable mixed-mode OTA-C universal
filter,” Analog Integrated Circuits and Signal Processing, vol. 58, no. 2, pp. 135-141,
2009.
[72] B. Thandri, J. Silva-Martinez and F. Maloberti, “A feedforward compensation scheme
for high gain wideband amplifiers,” Proceedings of the 8th
IEEE International
Conference on Electronics, Circuits and Systems, vol. 3, pp. 1115-1118, 2001.
References
186
[73] B. K. Thandri and J. Silva-Martinez, “A robust feedforward compensation scheme for
multistage operational transconductance amplifiers with no Miller capacitors,” IEEE
Journal of Solid-State Circuits, vol. 38, no. 2, pp. 237-243, 2003.
[74] S. Szczepanski and S. Koziel, “Phase compensation scheme for feed-forward
linearized CMOS operational transconductance amplifier,” Bulletin of the Polish
Academy of Sciences, Technical Sciences, vol. 52, no.2, pp. 141-148, 2004.
[75] J. Harrison and N. Weste, “350MHz opamp-RC filter in 0.18μm CMOS,” Electronics
Letters, vol. 38, no. 6, pp. 259-260, 2002.
[76] J. Harrison, N. Weste, “A 500MHz CMOS anti-alias filter using feed-forward op-
amps with local common-mode feedback,” IEEE International Solid-State Circuits
Conference, vol. 1, pp. 132-483, 2003.
[77] T. Laxminidhi, V. Prasadu and S. Pavan, “Widely programmable high-frequency
active RC filters in CMOS technology,” IEEE Transactions on Circuits and Systems-
I: Regular Papers, vol. 56, no. 2, pp. 327-336, 2009.
[78] D. Biolek, R. Senani, V. Biolkova and Z. Kolka, “Active elements for analog signal
processing: classification, review and new proposals,” Radio Engineering Journal,
vol. 17, no. 4, pp. 15-32, 2008.
[79] AD 844 Datasheet and SPICE macro models, Analog Devices Inc.
[80] R. Senani, “A novel application of four-terminal floating nullors,” Proceedings of the
IEEE, vol. 75, no. 11, pp. 1544-1546, 1987.
[81] T. S. Rathore, “Single FTFN realization of current transfer functions,” IETE Journal of
Research, vol. 51, no. 3, pp. 193-199, 2005.
[82] T. S. Rathore, “Current conveyor realizations of transfer functions,” IEE Proceedings,
vol. 122, no. 10, pp. 1119-1120, 1975.
[83] T. S. Rathore, “Analog computations using current conveyors, Journal of IETE (I), vol.
22, no. 8, pp. 510-511, 1976.
[84] T. S. Rathore, “Some more published literature on current conveyors,” IEE Proceedings
(Pt G), vol. 138, no. 3, pp. 432, 1991.
References
187
[85] A. K. Singh and R. Senani, “A new four-CC-based configuration for realizing a
voltage-mode biquad filters,” Journal of Circuits, Systems and Computers, vol. 11, no.
3, pp. 213-218, 2002.
[86] R. Senani, A. K. Singh and V. K. Singh, “New tunable SIMO-type current mode
universal biquad using MOCCs and all grounded passive elements,” Frequenz:
Journal of Telecommunications, vol. 57, no. 7-8, pp. 160-161, 2003.
[87] R. Senani, V. K. Singh, A. K. Singh and D. R. Bhaskar, “Novel electronically
controllable current-mode universal biquad filter,” IEICE Electronics Express, vol. 1,
no. 14, pp. 410-415, 2004.
[88] R. Senani, V. K. Singh, A. K. Singh and D. R. Bhaskar, “Tunable current-mode
universal biquads employing only three MOCCs and all grounded passive elements:
additional new realizations,” Frequenz: Journal of Telecommunications, vol. 59, no.
9-10, pp. 220-224, 2005.
[89] A. M. Soliman, “Current-mode universal filters using current conveyors: classification
and review,” Circuits, Systems, and Signal Processing, vol. 27, no. 3, pp. 405-
427, 2008.
[90] T. S. Rathore, “Current conveyor equivalent circuits,” International Journal of
Engineering & Technology, vol. 4, no. 1, pp. 1-7, 2012.
[91] S.-I. Liu, “Universal filter using two current-feedback amplifiers,” Electronics Letters,
vol. 31, no. 8, pp. 629-630, 1995.
[92] J. Mahattanakul and C. Toumazou, “A theoretical study of the stability of high
frequency current feedback op-amp integrators,” IEEE Transactions on Circuits and
Systems, vol. 43, no. 1, pp. 2-12, 1996.
[93] X. R. Meng, Z. H. Yu, “CFA based fully integrated Tow-Thomas biquad,” Electronics
Letters, vol. 32, no. 8, pp. 722-723, 1996.
[94] R. Senani and S. S. Gupta, “Universal voltage mode/current mode filter realized with
current feedback op-amps,” Frequenz: Journal of Telecommunications, vol. 51, no.
7/8, pp. 203-208, 1997.
References
188
[95] S. A. Mahmoud and A. M. Soliman, “New MOS-C biquad filter using the current
feedback operational amplifier,” IEEE Transactions on Circuits and Systems-I, vol.
46, no. 12, pp. 1510-1512, 1999.
[96] R. K. Sharma and R. Senani, “Multifunction CM/ VM biquads realized with a single
CFOA and grounded capacitors,” International Journal of Electronics and
Communications, AEU, vol. 57, no. 5, pp. 301-308, 2003.
[97] R. K. Sharma and R. Senani, “Universal current-mode biquad using a single CFOA,”
International Journal of Electronics, vol. 91, no. 3, pp. 175-183, 2004.
[98] R. Mita, G. Palumbo, and S. Pennisi, “Effect of CFOA nonidealities in Miller
integrator cells,” IEEE Transactions on Circuits and Systems-II: Express briefs, vol.
51, no. 5, pp. 249-253, 2004.
[99] R. K. Sharma and R. Senani, “On the realization of universal current mode biquads
using a single CFOA,” Analog Integrated Circuits and Signal Processing, vol. 41, no.
1, pp. 65-78, 2004.
[100] A. K. Singh, R. Senani, “CFOA-based state-variable biquad and its high-frequency
compensation,” IEICE Electronic Express, vol. 2, no. 7, pp. 232-238, 2005.
[101] R. Mita, G. Palumbo, and S. Pennisi, “Nonidealities of Tow-Thomas biquads using
VOA- and CFOA-based Miller integrators,” IEEE Transactions on Circuits and
Systems-II: Express briefs, vol. 52, no. 1, pp. 22-27, 2005.
[102] V. K. Singh, A. K. Singh, D. R. Bhaskar, R. Senani, “New universal biquads
employing CFOAs,” IEEE Transactions on Circuits and Systems-II: Express briefs,
vol. 53, no. 11, pp. 1299-1303, 2006.
[103] T. S. Rathore, “CFA-based grounded capacitor operational simulation of ladder filters,”
International Journal of Circuit Theory Applications, vol. 36, pp. 697-716, 2008.
[104] R. F. Ahmed, I. A. Awad and A. N. Soliman, “A transformation method from voltage-
mode op-amp RC circuits to current-mode Gm-C circuits,” Circuits, Systems and
Signal Processing, vol. 25, pp. 609-626, 2006.
References
189
[105] A. C. M. De Queiroz, L. P. Caloba, E. Sanchez-Sinencio, “Signal-flow graph OTA-C
integrated filters,” IEEE International Symposium on Circuits and Systems, vol. 3, pp.
2165-2168, 1988.
[106] Y. Sun and J. K. Fidler, “Structure generation of current-mode two-integrator loop
dual output-OTA grounded capacitor filters,” IEEE Transactions on Circuits and
Systems-II: Analog and Digital Signal Processing, vol. 43, no. 9, pp. 659-663, 1996.
[107] J. Wu, and E. I. El-Masry, “Design of current-mode ladder filters using coupled
biquads,” IEEE Transactions on Circuits and Systems II: Analog and Digital Signal
Processing, vol. 45, no. 11, pp. 1445-1454, 1998.
[108] B. M. Al-Hashimi, F. Dudek and M. Moniri, “Current-mode group-delay equalization
using pole-zero mirroring technique,” IEE Proceedings: Circuits, Devices and
Systems, vol. 147, no. 4, pp. 257-263, 2000.
[109] Y. Sun and J. K. Fidler, “Current-mode OTA-C realization of arbitrary filter
characteristics,” Electronics Letters, vol. 32, no. 13, pp. 1181-1182, 1996.
[110] D. Biolek, V. Biolková and Z. Kolka, “Universal current-mode OTA-C KHN biquad,”
International Journal of Electronics, Circuits and Systems, vol. 1, no. 4, pp. 214-217,
2007.
[111] C. M. Chang and S. K. Pai, “Universal current-mode OTA-C biquad with the
minimum components,” IEEE Transactions on Circuits and Systems-I: Fundamental
Theory and Applications, vol. 47, no. 8, pp. 1235-1238, 2000.
[112] C. Chang, B. M. Al-Hashimi and J. Neil Ross, “Unified active filter biquad
structures,” IEE Proceedings: Circuits, Devices and Systems, vol. 151, no. 4, pp. 273-
277, 2004.
[113] M. T. Abuelma’atti and A. Bentrcia, “New universal current-mode multiple-input
multiple-output OTA-C filter,” IEEE Asia-Pacific Conference on Circuits and
Systems, vol. 2, pp. 1037-1040, 2004.
References
190
[114] T. Tsukutani, Y. Sumi, M. Higashimura and Y. Fukui, “Current-mode universal
biquad circuit using MO-OTAs and DO-CCII,” IEEE International Symposium on
Circuits and Systems, vol. 2, pp. 1589-1592, 2005.
[115] W. Chunhua, Z. Ling, L. Tao, “A new OTA-C current-mode biquad filter with single
input and multiple outputs,” International Journal of Electronics and Communications
(AEÜ), vol. 62, no. 3, pp. 232-234, 2008.
[116] K. Laker, R. Schaumann, M. Ghausi, “Multiple-loop feedback topologies for the
design of low-sensitivity active filters,” IEEE Transactions on Circuits and Systems,
vol. 26, no. 1, pp. 1-21, 1979.
[117] Y. Sun, J. K. Fidler, “OTA-C realization of general high-order transfer functions,”
Electronics Letters, vol. 29, no. 12, pp. 1057-1058, 1993.
[118] Y. Sun, J. K. Fidler, “General multiple loop feedback OTA-C filter architecture,” IEE
Third one-day Colloquium on Analog Signal Processing, pp. 3/1-3/6, 1996.
[119] Y. Sun, and J. K. Fidler, “Structure generation and design of multiple-loop feedback
OTA-grounded capacitor filters,” IEEE Transactions on Circuits and Systems, vol. 44,
pp. 1-11, 1997.
[120] Y. Sun, and J. K. Fidler, “Current-mode multiple loop feedback filters using dual
output OTAs and grounded capacitors,” International Journal of Circuit Theory and
Applications, vol. 25, pp. 69-80, 1997.
[121] Y. Sun, “Synthesis of leap-frog multiple-loop feedback OTA-C filters,” IEEE
Transactions on Circuits and Systems-II: Express briefs, vol. 53, no. 9, pp. 961-965,
2006.
[122] C. M. Chang, B. M. Al-Hashimi, “Analytical synthesis of high-order current-mode
OTA-C filters,” IEEE Transactions on Circuits Systems-I, vol. 50, no. 9, pp. 1188-
1192, 2003.
[123] C. M. Chang, C. L. Hou, W. Y. Chung, J. W. Horng, and C. K. Tu, “Analytical
synthesis of high-order single-ended-input OTA-grounded C all-pass and band-reject
References
191
filter structures,” IEEE Transactions on Circuits and Systems-I: Regular Papers, vol.
53, no. 3, pp. 489-498, 2006.
[124] J. Ramírez-Angulo and E. Sánchez-Sinencio, “High-frequency compensated current-
mode ladder filters using multiple output OTAs,” IEEE Transactions on Circuits and
Systems- II: Analog and Digital Signal Processing, vol. 41, no. 9, pp. 581-586, 1994.
[125] J. Wu and E. I. El-Masry, “Current-mode band-pass ladder filters using OTAs,”
International Journal of Electronics, vol. 85, no. 1, pp. 61-70, 1998.
[126] Y. Sun, X. Zhu, J. Moritz, “Explicit design formulas for current-mode leap-frog OTA-
C filters and 300MHz CMOS seventh-order linear phase filter,” Journal of Circuit
Theory and Applications, vol. 38, no. 4, pp. 367-382, 2010.
[127] R. Nawrocki, “Electronically controlled OTA-C filter with follow-the-leader-feedback
structure,” International Journal of Circuit Theory and Applications, vol. 16, no. 1,
pp. 93-96, 1988.
[128] A. N. Gönüleren, R. Köprü and H. Kuntman, “Multiloop feedback bandpass OTA-C
filters using quads,” Proceedings of 12th
European Conference on Circuit Theory and
Design, vol. 2, pp. 607-610, 1995.
[129] J. S. Martinez, M. S. J. Steyaert and W. Sansen, “A 10.7-MHz 68-dB SNR CMOS
continuous-time filter with on-chip automatic tuning,” IEEE Journal of Solid-State
Circuits, vol. 21, no. 12, pp. 1843-1853, 1992.
[130] K. C. Smith and A. S. Sedra, “The current conveyor- a new circuit building block,”
Proceedings of IEEE, vol. 56, no. 8, pp. 1368-1369, 1968.
[131] A. S. Sedra and K. C. Smith, “A second generation current conveyor and its
applications,” IEEE Transactions on Circuit Theory, vol. 17, no. 1, pp. 132-134, 1970.
[132] R. Senani, “Novel application of generalized current conveyor,” Electronics Letters,
IEE, vol. 20, no. 4, pp. 169-170, 1984.
[133] B. Wilson, “Recent developments in current conveyors and current-mode circuits,”
IEE Proceedings: Circuits, Devices and Systems, vol. 137, no. 2, pp. 63-77, 1990.
References
192
[134] A. S. Sedra, G. W. Roberts and F. Gohk, “The current conveyor: history, progress and
new results,” IEE Proceedings: Circuits, Devices and Systems, vol. 137, no. 2, pp. 78-
87, 1990.
[135] G. G. A. Black, R. T. Friedmann and A. S. Sedra, “Gyrator implementation with
integrable current conveyors,” IEEE Journal of Solid State Circuits, vol. 6, pp. 395-
399, 1971.
[136] R. Senani, “Active simulation of inductors using current conveyors,” Electronics
Letters, IEE, vol. 14, no. 15, pp. 483-484, 1978.
[137] K. Pal, “Simulated inductances using current conveyors and their applications,”
Microelectronics Journal, vol. 12, pp. 30-31, 1981.
[138] A. M. Soliman, “Current mode CCII oscillators using grounded capacitors and
resistors,” International Journal of Circuit Theory and Applications, vol. 26, no. 5, pp.
431-438, 1998.
[139] R. Senani, S. S. Gupta, “Novel SRCOs using first generation current conveyor,”
International Journal of Electronics, vol. 87, no. 10, pp. 1187-1192, 2000.
[140] A. M. Soliman, “Generation of three oscillator families using CCII and ICCII,” AEU
- International Journal of Electronics and Communications, vol. 64, no. 9, pp. 880-
887, 2010.
[141] S. Franco, “Analytical foundations of current-feedback amplifiers,” IEEE
International Symposium on Circuits and Systems, vol. 2, pp. 1050-1053, 1993.
[142] D. F. Bowers, “The so-called current feedback operational amplifier - technological
breakthrough or engineering curiosity?” Proceedings of IEEE International
Symposium on Circuits and Systems, vol. 2, pp. 1054-1057, 1993.
[143] B. Harvey, “Current feedback opamp limitations: a state-of-the-art review,”
Proceedings of IEEE International Symposium on Circuits and Systems, vol. 2, pp.
1066-1069, 1993.
References
193
[144] C. Tomazou, A. Payne and J. Lidgey, “Current feedback versus voltage feedback
amplifiers: history, insight and relationships,” Proceedings of IEEE International
Symposium on Circuits and Systems, vol. 2, pp. 1046-1049, 1993.
[145] C. Toumazou and F. G. Lidgey, “Current feedback op-amps: a blessing in disguise?”
IEEE Circuits Devices Magazine, vol. 10, no. 1, pp. 34-37, 1994.
[146] A. Payne and C. Toumazou, “Analog amplifiers: classification and generalization,”
IEEE Transactions on Circuits and Systems-I, vol. 43, no. 1, pp. 43-50, 1996.
[147] G. Palumbo and S. Pennisi, “Current-feedback amplifiers versus voltage operational
amplifiers,” IEEE Transactions on Circuits and Systems-I: Fundamental Theory and
Applications, vol. 48, no. 5, pp. 617-623, 2001.
[148] J. Bayard, “CFOA based inverting amplifier bandwidth enhancement,” IEEE
Transactions on Circuits and Systems-II: Analog and Digital Signal Processing, vol.
48, no. 12, pp. 1148-1150, 2001.
[149] A. M. Soliman, “Applications of the current feedback operational amplifier,” Analog
Integrated Circuits Signal Processing, vol. 11, no. 3, pp. 265-302, 1996.
[150] A. M. Ismail and A. M. Soliman, “Novel CMOS current feedback op-amp realization
suitable for high frequency applications,” IEEE Transactions on Circuits and Systems-
I, vol. 47, no. 6, pp. 918-921, 2000.
[151] S. A. Mahmoud, H. O. Elwan, and A. M. Soliman, “Low voltage rail to rail CMOS
current feedback operational amplifier and its applications for analog VLSI,” Analog
Integrated Circuits and Signal Processing, vol. 25, no. 1, pp. 47-57, 2000.
[152] A. K. Singh and R. Senani, “Active-R design using CFOA-poles: new resonators,
filters and oscillators,” IEEE Transactions on Circuits and Systems II- Analog and
Digital Signal Processing, vol. 48, no. 5, pp. 504-511, 2001.
[153] E. Bruun, “Feedback analysis of transimpedance operational amplifier circuits,” IEEE
Transactions on Circuits Systems-I: Fundamental Theory and Applications, vol. 40,
no. 4, pp. 275-278, 1993.
References
194
[154] S. Pennisi, G. Scotti, A. Trifiletti, “Avoiding the gain-bandwidth trade off in feedback
amplifiers,” IEEE Transactions on Circuits and Systems-I: Regular Papers, vol. 58,
no. 9, pp. 2108-2113, 2011.
[155] P. V. Ananda Mohan, “Comments on avoiding the gain-bandwidth trade off in
feedback amplifiers,” IEEE Transactions on Circuits and Systems-I: Regular Papers,
vol. 58, no. 9, pp. 2114-2116, 2011.
[156] S. Pennisi, G. Scotti, A. Trifiletti, “Reply to comments on avoiding the gain-
bandwidth trade off in feedback amplifiers,” IEEE Transactions on Circuits and
Systems-I: Regular Papers, vol. 58, no. 9, pp. 2117, 2011.
[157] A. Assi, M. Sawan and J. Zhu, “An offset compensated and high-gain CMOS current
feedback op-amp,” IEEE Transactions on Circuits and Systems-I, vol. 45, no.1, pp.
85-90, 1998.
[158] G. Palumbo, “Bipolar current feedback amplifier: compensation guidelines,” Analog
Integrated Circuits and Signal Processing Journal, vol. 19, no. 2, pp. 107-114, 1999.
[159] R. Senani and V. K. Singh, “Synthesis of canonic single resistance controlled
oscillators using a single current-feedback-amplifier,” IEE Proceedings Circuits,
Devices and Systems, vol. 143, pp. 71-72, 1996.
[160] M. T. Abuelma’atti, A. A. Farooqi, “Novel RC oscillators using the current-feedback
operational amplifier,” IEEE Transactions on Circuits and Systems-I: Fundamental
Theory and Applications, vol. 43, no. 2, pp. 155-157, 1996.
[161] R. Senani and V. K. Singh, “Novel single-resistance-controlled oscillator
configuration using current feedback amplifiers,” IEEE Transactions on Circuits and
Systems-I: Fundamental Theory and Applications, vol. 43, no. 8, pp. 698-700, 1996.
[162] R. Senani and S. S. Gupta, “Synthesis of single-resistance-controlled oscillators using
CFOAs: simple state variable approach,” IEE Proceedings- Circuits, Devices and
Systems, vol. 144, no. 2, pp. 104-106, 1997.
References
195
[163] S. S. Gupta and R. Senani, “State variable synthesis of single-resistance-controlled
grounded-capacitor oscillators using only two CFOAs,” IEE Proceedings- Circuits,
Devices and Systems, vol. 145, no. 2, pp. 135-138, 1998.
[164] S. S. Gupta and R. Senani, “State variable synthesis of single-resistance-controlled
grounded-capacitor oscillators using only two CFOAs: additional new realisations,”
IEE Proceedings-Circuits, Devices and Systems, vol. 145, no. 6, pp. 415-418, 1998.
[165] R. Senani, “Realization of a class of analog signal processing/signal generation
circuits: novel configurations using current feedback op-amps,” Frequenz: Journal of
Telecommunications, vol. 52, no. 9/10, pp. 196-206, 1998.
[166] V. K. Singh, R. K. Sharma, A. K. Singh, D. R. Bhaskar and R. Senani, “Two new
canonic single-CFOA oscillators with single resistor controls,” IEEE Transactions on
Circuits and Systems-II: Express briefs , vol. 52, no. 12, pp. 860-864, 2005.
[167] D. R. Bhaskar, R. Senani, “New CFOA-based single-element-controlled sinusoidal
oscillators,” IEEE Transactions on Instrumentation and Measurement, vol. 55, no. 6,
pp. 2014-2021, 2006.
[168] S. S. Gupta, R. K. Sharma, D. R. Bhaskar and R. Senani, “Sinusoidal oscillators with
explicit current output employing current-feedback op-amps,” International Journal of
Circuit Theory and Applications, vol. 38, no. 2, pp. 131-147, 2010.
[169] S. K. Mitra and K. Hirano, “Digital all-pass networks,” IEEE Transactions on Circuits
and Systems, vol. 21, pp. 688-700, 1974.
[170] A. H. Gray and J. D. Markel, “Digital lattice and ladder filter synthesis,” IEEE
Transactions on Audio Electroacoustics, vol. 21, pp. 491-500, 1973.
[171] S. Minaei, M. A. Ibrahim, H. Kuntman, “DVCC based current-mode first-order all-
pass filter and its application,” Proceedings of 10th
IEEE International Conference on
Electronics, Circuits and Systems, vol. 1, pp. 276-279, 2003.
[172] CA 3080 Data sheet, Intersil.
References
196
[173] D. Akerberg and K. Mossberg, “A versatile Active RC building block with inherent
compensation for the finite bandwidth of the amplifier,” IEEE Transactions on
Circuits and Systems, vol. 21, pp. 75-78, 1974.
[174] A. V. Oppenheim and R. W. Schafer, Digital Processing of Signals, John Wiley : New
York, 2007.
[175] N. Boutin, “Active compensation of op-amp inverting amplifier using NIC,”
Electronics Letters, vol. 17, no. 25, pp. 978-979, 1981.
[176] T. S. Rathore, “Application of complementary transformation to NIC compensated
amplifiers,” Electronics Letters, vol. 18, no. 10, pp. 400-401, 1982.
[177] T. S. Rathore and K. R. Pai, “Optimum design and study of an NIC compensated
inverting amplifier,” IEEE International Symposium on Circuits and Systems, 1984.
[178] P. V. Ananda Mohan, “Active compensation of op-amp inverting amplifiers using
NIC,” AEU, vol. 42, pp. 192-194, 1988.
[179] T. S. Rathore and K. R. Pai, “Performance of a negative resistance compensated
inverting amplifier,” IETE Technical Review, vol. 5, pp. 287-290, l988.
[180] W. Jaikla and M. Siripruchyanan, “An electronically controllable capacitance
multiplier with temperature compensation,” Proceedings of International Symposium
on Communications and Information Technologies (ISCIT), pp. 356-359, 2006.
[181] S. Ravichandran and K. Radhakrishna Rao, “A novel active compensation scheme for
Active-RC filters,” Proceedings of IEEE, vol. 68, no. 6, pp. 743-744, 1980.
[182] T. S. Rathore, “Compensated integrators for high frequency applications,” International
Journal of Circuit Theory and Applications, vol. 11, no 1, pp. 99-106, 1983.
[183] S. I. Liu, Y.-H. Liao, “Table-based log-domain linear transformation filter,”
Electronics Letters, vol. 32, no. 19, pp. 1771-1772, 1996.
[184] S. Hiroyuki, T. Seiichiro, F. Kikuo, F. Yutaka, “Current-mode LTA filters using
OTA,” IEE Papers of Technical Meeting on Electronic Circuits, Japan, vol. 6, no.
107-113, pp. 7-11, 2006.
References
197
[185] G. Groenewold, “A high-dynamic-range integrated continuous-time band pass filter,”
IEEE Journal of Solid-State Circuits, vol. 27 , no. 11, pp. 1614-1622, 1992.
[186 ] G. Groenewold, “Optimal dynamic range integrators,” IEEE Transactions on Circuits
and Systems I: Fundamental Theory and Applications, vol. 39, no. 8, pp. 614-627,
1992.
[187] J. P. Moree, G. Groenewold, L. A. D. van den Broeke, “A bipolar integrated
continuous-time filter with optimized dynamic range,” IEEE Journal of Solid-State
Circuits, vol. 28 , no. 9, pp. 954-961, 1993.
[188] E. Vittoz and Y. Tsividis, “Frequency - Dynamic Range – Power,” Chapter 10 in
Tradeoffs in Analog Circuit Design, ed. by C. Toumazou, G. Moschytz, and B.
Gilbert, Kluwer Academic Publishers, 2002.
[189] S. Koziel, A. Ramachandran, S. Szczepanski, E. Sánchez-Sinencio, “Dynamic range,
noise and linearity optimization of continuous-time OTA-C filters,” Proceedings of
the 11th IEEE International Conference on Electronics, Circuits and Systems, pp. 41-
44, 2004.
[190] S. Koziel, A. Ramachandran, S. Szczepanski, E. Sánchez-Sinencio, “A general
framework for evaluating nonlinearity, noise and dynamic range in continuous-time
OTA-C filters for computer-aided design and optimization,” International Journal of
Circuit Theory and Applications, vol. 35, no. 4, pp. 405-425, 2007.
[191] G. Espinosa, F. Montecchi, E. Sanchez Sinencio, F. Maloberti, “Noise performances of
OTA-C filters,” IEEE International Symposium on Circuits and Systems, vol. 3, pp.
2173-2176, 1988.
[192] A. Brambilla, G. Espinosa, F. Montecchi, E. Sánchez Sinecio, “Noise optimization in
operational transconductance amplifier filters,” IEEE International Symposium on
Circuits and Systems, vol. 1, pp. 118-121, 1989.
[193] A. A. Abidi, “Noise in active resonators and the available dynamic range,” IEEE
Transactions on Circuits and Systems I: Fundamental Theory and Applications, vol.
39, no. 4, pp. 296-299, 1992.
References
198
[194] J. Mahattanakul and C. Toumazou, “Current-mode versus voltage-mode Gm-C biquad
filters: what the theory says,” IEEE Transactions on Circuits and Systems II: Analog
and Digital Signal Processing, vol. 45, no. 2, pp. 173-186, 1998.
[195] L. Toth, Y. P. Tsividis, N. Krishnapura, “On the analysis of noise and interference in
instantaneously companding signal processors,” IEEE Transactions on Circuits and
Systems II: Analog and Digital Signal Processing, vol. 45, no. 9, pp. 1242-249, 1998.
[196] G. Efthivoulidis, L. Toth and Y. P. Tsividis, “Noise in Gm-C filters,” IEEE
Transactions on Circuits and Systems II: Analog and Digital Signal Processing, vol.
45, no. 3, pp. 295-302, 1998.
[197] K. A. Mezher, P. Bowron, “Noise-flow-graph analysis of OTA-C filters,” The IEEE
International Symposium on Circuits and Systems, vol. 1, pp. 695-698, 2001.
[198] S. Koziel, R. Schaumann, Haiqiao Xiao, “Analysis and optimization of noise in
continuous-time OTA-C filters,” IEEE Transactions on Circuits and Systems I:
Regular Papers, vol. 52, no. 6, pp. 1086-1094, 2005.
[199] G. Groenewold, “Noise and Group Delay in Active Filters,” IEEE Transactions on
Circuits and Systems I: Regular Papers, vol. 54, no. 7, pp. 1471-1480, 2007.
[200] G. Palumbo, S. Pennisi, “Analysis of the noise characteristics of current-feedback
operational amplifier,” Microelectronics Reliability, vol. 40, no. 2, pp. 321-327, 2000.
[201] G. Palumbo, S. Pennisi, “Current-feedback amplifiers versus voltage operational
amplifiers,” IEEE Transactions on Circuits and Systems I: Fundamental Theory and
Applications, vol. 48, no. 5, pp. 617-623, 2001.
[202] E. Vittoz and J. Fellrath, “CMOS analog circuits based on weak inversion operation,”
IEEE Journal of Solid-State Circuits, vol. 12, pp. 224-231, 1977.
[203] E. Vittoz, “Future trends of analog in the VLSI environment,” Proceedings of the IEEE
International Symposium on Circuits and Systems, pp. 1372-1375, 1990.
[204] S. L. Smith, E. Sanchez-Sinencio, “Low voltage integrators for high-frequency CMOS
filters using current mode techniques,” IEEE Transactions on Circuits and Systems II:
Analog and Digital Signal Processing, vol. 43, no. 1, pp. 39-48, 1996.
References
199
[205] N. Krishnapura and Y. Tsividis, “Noise and power reduction in filters through the use
of adjustable biasing,” IEEE Journal of Solid State Circuits, vol. 36, no. 12, pp. 1912-
1920, 2001.
[206] N. Krishnapura and Y. Tsividis, “Micropower low-voltage analog filter in a digital
CMOS process,” IEEE Journal of Solid State Circuits, vol. 38, no. 6, pp. 1063-1067,
2003.
[207] Y. Tsividis, N. Krishnapura, Y. Palaskas, L. Toth, “Internally varying analog circuits
minimize power dissipation,” IEEE Circuits and Devices Magazine, vol. 19, no. 1, pp.
63-72, 2003.