references - connecting repositoriesevaluation of an in situ forming hydrogel wound dressing based...
TRANSCRIPT
-
REFERENCES
Abdelgawad, A. M., Hudson, S. M. and Rojas, O. J. (2014). Antimicrobial wound
dressing nanofiber mats from multicomponent (chitosan/silver-NPs/polyvinyl
alcohol) systems. Carbohydrate Polymers, 100(0), 166-178.
Agarwal, S., Wendorff, J. H. and Greiner, A. (2008). Use of electrospinning
technique for biomedical applications. Polymer, 49(26), 5603-5621.
Agrawal, C. M. and Ray, R. B. (2001). Biodegradable polymeric scaffolds for
musculoskeletal tissue engineering. Journal of Biomedical Materials
Research, 55(2), 141-150.
Allahyarzadeh, V., Montazer, M., Nejad, N. H. and Samadi, N. (2013). In situ
synthesis of nano silver on polyester using NaOH/Nano TiO2. Journal of
Applied Polymer Science, 129(2), 892-900.
Allemann, F., Mizuno, S., Eid, K., Yates, K. E., Zaleske, D. and Glowacki, J. (2001).
Effects of hyaluronan on engineered articular cartilage extracellular matrix
gene expression in 3-dimensional collagen scaffolds. Journal of Biomedical
Materials Research, 55(1), 13-19.
Andreadis, S. (2007). Gene-Modified Tissue-Engineered Skin: The Next Generation
of Skin Substitutes. In K. Lee & D. Kaplan (Eds.), Tissue Engineering II
(Vol. 103, pp. 241-274): Springer Berlin Heidelberg.
Andreassi, A., Bilenchi, R., Biagioli, M. and D'Aniello, C. (2005). Classification and
pathophysiology of skin grafts. Clinics in Dermatology, 23(4), 332-337.
Armentano, I., Dottori, M., Fortunati, E., Mattioli, S. and Kenny, J. M. (2010).
Biodegradable polymer matrix nanocomposites for tissue engineering: A
review. Polymer Degradation and Stability, 95(11), 2126-2146.
Arun Richard, C., Venugopal, J., Sundarrajan, S. and Ramakrishna, S. (2011).
Fabrication of a nanofibrous scaffold with improved bioactivity for culture of
human dermal fibroblasts for skin regeneration. Biomedical Materials, 6(1),
015001.
-
130
Athanasiou, K. A., Niederauer, G. G. and Agrawal, C. M. (1996). Sterilization,
toxicity, biocompatibility and clinical applications of polylactic acid/
polyglycolic acid copolymers. Biomaterials, 17(2), 93-102.
Atiyeh, B. S. and Costagliola, M. (2007). Cultured epithelial autograft (CEA) in burn
treatment: Three decades later. Burns, 33(4), 405-413.
Auger, F. A., Rouabhia, M., Goulet, F., Berthod, F., Moulin, V. and Germain, L.
(1998). Tissue-engineered human skin substitutes developed from collagen-
populated hydrated gels: clinical and fundamental applications. Medical and
Biological Engineering and Computing, 36(6), 801-812.
Balakrishnan, B., Mohanty, M., Umashankar, P. R. and Jayakrishnan, A. (2005).
Evaluation of an in situ forming hydrogel wound dressing based on oxidized
alginate and gelatin. Biomaterials, 26(32), 6335-6342.
Bannasch, H., Unterberg, T., Föhn, M., Weyand, B., Horch, R. E. and Stark, G. B.
(2008). Cultured keratinocytes in fibrin with decellularised dermis close
porcine full-thickness wounds in a single step. Burns, 34(7), 1015-1021.
Baumgarten, P. K. (1971). Electrostatic spinning of acrylic microfibers. Journal of
Colloid and Interface Science, 36(1), 71-79.
Behler, K., Havel, M. and Gogotsi, Y. (2007). New solvent for polyamides and its
application to the electrospinning of polyamides 11 and 12. Polymer, 48(22),
6617-6621.
Berger, J., Reist, M., Mayer, J. M., Felt, O., Peppas, N. A. and Gurny, R. (2004).
Structure and interactions in covalently and ionically crosslinked chitosan
hydrogels for biomedical applications. European Journal of Pharmaceutics
and Biopharmaceutics, 57(1), 19-34.
Bhattarai, N., Li, Z., Gunn, J., Leung, M., Cooper, A., Edmondson, D., et al. (2009).
Natural-Synthetic Polyblend Nanofibers for Biomedical Applications.
Advanced Materials, 21(27), 2792-2797. doi: 10.1002/adma.200802513
Blakeney, B. A., Tambralli, A., Anderson, J. M., Andukuri, A., Lim, D.-J., Dean, D.
R., et al. (2011). Cell infiltration and growth in a low density, uncompressed
three-dimensional electrospun nanofibrous scaffold. Biomaterials, 32(6),
1583-1590.
Blanpain, C., Lowry, W. E., Geoghegan, A., Polak, L. and Fuchs, E. (2004). Self-
Renewal, Multipotency, and the Existence of Two Cell Populations within an
Epithelial Stem Cell Niche. Cell, 118(5), 635-648.
-
131
Bonaventure, J., Kadhom, N., Cohen-Solal, L., Ng, K. H., Bourguignon, J., Lasselin,
C., et al. (1994). Reexpression of Cartilage-Specific Genes by
Dedifferentiated Human Articular Chondrocytes Cultured in Alginate Beads.
Experimental Cell Research, 212(1), 97-104.
Borradori, L. and Sonnenberg, A. (1999). Structure and Function of
Hemidesmosomes: More Than Simple Adhesion Complexes. 112(4), 411-
418.
Böttcher-Haberzeth, S., Biedermann, T. and Reichmann, E. (2010). Tissue
engineering of skin. Burns, 36(4), 450-460.
Boyan, B. D., Hummert, T. W., Dean, D. D. and Schwartz, Z. (1996). Role of
material surfaces in regulating bone and cartilage cell response. Biomaterials,
17(2), 137-146.
Boyce, S. T. (2001). Design principles for composition and performance of cultured
skin substitutes. Burns, 27(5), 523-533.
Božanić, D. K., Trandafilović, L. V., Luyt, A. S. and Djoković, V. (2010). ‘Green’
synthesis and optical properties of silver–chitosan complexes and
nanocomposites. Reactive and Functional Polymers, 70(11), 869-873.
Causa, F., Netti, P. A., Ambrosio, L., Ciapetti, G., Baldini, N., Pagani, S., et al.
(2006). Poly-ε-caprolactone/hydroxyapatite composites for bone
regeneration: In vitro characterization and human osteoblast response.
Journal of Biomedical Materials Research - Part A, 76(1), 151-162.
Chen, Z., Mo, X. and Qing, F. (2007). Electrospinning of collagen–chitosan
complex. Materials Letters, 61(16), 3490-3494.
Chew, S. Y., Wen, J., Yim, E. K. F. and Leong, K. W. (2005). Sustained Release of
Proteins from Electrospun Biodegradable Fibers. Biomacromolecules, 6(4),
2017-2024. doi: 10.1021/bm0501149
Chiono, V., Vozzi, G., D'Acunto, M., Brinzi, S., Domenici, C., Vozzi, F., et al.
(2009). Characterisation of blends between poly(ε-caprolactone) and
polysaccharides for tissue engineering applications. Materials Science and
Engineering: C, 29(7), 2174-2187.
Chong, E. J., Phan, T. T., Lim, I. J., Zhang, Y. Z., Bay, B. H., Ramakrishna, S., et al.
(2007). Evaluation of electrospun PCL/gelatin nanofibrous scaffold for
wound healing and layered dermal reconstitution. Acta Biomaterialia, 3(3),
321-330.
-
132
Christopher Mahoney, Matthew, B. M., Jagannathan, S. and Narayan, B. (2012).
Nanofibrous Structure of Chitosan for Biomedical Applications. Journal of
nanomedicine and biotherapeutic discovery, 2(1).
Chu, C.-S., McManus, A. T., Matylevich, N. P., Goodwin, C. W. and Pruitt, B. A. J.
(2002). Integra as a Dermal Replacement in a Meshed Composite Skin Graft
in a Rat Model: A One-Step Operative Procedure. Journal of Trauma and
Acute Care Surgery, 52(1), 122-129.
Chunder, A., Sarkar, S., Yu, Y. and Zhai, L. (2007). Fabrication of ultrathin
polyelectrolyte fibers and their controlled release properties. Colloids and
Surfaces B: Biointerfaces, 58(2), 172-179.
Cohen, M., Joester, D., Geiger, B. and Addadi, L. (2004). Spatial and Temporal
Sequence of Events in Cell Adhesion: From Molecular Recognition to Focal
Adhesion Assembly. ChemBioChem, 5(10), 1393-1399.
Cooper, A., Bhattarai, N. and Zhang, M. (2011). Fabrication and cellular
compatibility of aligned chitosan-PCL fibers for nerve tissue regeneration.
Carbohydrate Polymers, 85(1), 149-156.
Dahlberg, L. and Kreicbergs, A. (1991). Demineralized allogeneic bone matrix for
cartilage repair. Journal of Orthopaedic Research, 9(1), 11-19.
Dan, K., Molamma, P. P., Benjamin, S., Markus, E., Erich, W. and Seeram, R.
(2012). Mechanical properties and in vitro behavior of nanofiber–hydrogel
composites for tissue engineering applications. Nanotechnology, 23(9),
095705.
Deisinger, U., Stenzel, F. and Ziegler, G. (2004) Development of Hydroxyapatite
Ceramics with Tailored Pore Structure. Vol. 254-256 (pp. 977-980).
Del Gaudio, C., Bianco, A., Folin, M., Baiguera, S. and Grigioni, M. (2009).
Structural characterization and cell response evaluation of electrospun PCL
membranes: Micrometric versus submicrometric fibers. Journal of
Biomedical Materials Research Part A, 89A(4), 1028-1039.
Dobkowski, J., Kołos, R., Kamiński, J. and Kowalczyńska, H. M. (1999). Cell
adhesion to polymeric surfaces: Experimental study and simple theoretical
approach. Journal of Biomedical Materials Research, 47(2), 234-242.
Doshi, J. and Reneker, D. H. (1995). Electrospinning process and applications of
electrospun fibers. Journal of Electrostatics, 35(2-3), 151-160.
-
133
Dr. K. P. Chellamani, R. S. V. B., D. Veerasubramanian. (2014). Development of
Wound Dressing Made of Electro Spun Tetracycline Hydrochloride Drug
Incorporated PCL (Poly (ɛ-Caprolactone)) Nanomembrane International
Journal of Emerging Technology and Advanced Engineering 4(4), 6.
Duan, Y.-y., Jia, J., Wang, S.-h., Yan, W., Jin, L. and Wang, Z.-y. (2007).
Preparation of antimicrobial poly(ϵ-caprolactone) electrospun nanofibers
containing silver-loaded zirconium phosphate nanoparticles. Journal of
Applied Polymer Science, 106(2), 1208-1214.
Duan, Y. Y., Jia, J., Wang, S. H., Yan, W., Jin, L. and Wang, Z. Y. (2007).
Preparation of antimicrobial poly(e-caprolactone) electrospun nanofibers
containing silver-loaded zirconium phosphate nanoparticles. Journal of
Applied Polymer Science, 106(2), 1208-1214.
Dunn, G. A. and Heath, J. P. (1976). A new hypothesis of contact guidance in tissue
cells. Experimental Cell Research, 101(1), 1-14.
Edwards, M. D., Mitchell, G. R., Mohan, S. D. and Olley, R. H. (2010).
Development of orientation during electrospinning of fibres of poly(e-
caprolactone). European Polymer Journal, 46(6), 1175-1183.
Eichhorn, S. J. and Sampson, W. W. (2005). Statistical geometry of pores and
statistics of porous nanofibrous assemblies. Journal of The Royal Society
Interface, 2(4), 309-318.
Elsabee, M. Z., Naguib, H. F. and Morsi, R. E. (2012). Chitosan based nanofibers,
review. Materials Science and Engineering: C, 32(7), 1711-1726.
Falconnet, D., Csucs, G., Michelle Grandin, H. and Textor, M. (2006). Surface
engineering approaches to micropattern surfaces for cell-based assays.
Biomaterials, 27(16), 3044-3063.
feng. A Novel Biodegradable System Based on BSA/PCL Core-shell Structured
Nanofibers for Controlled Drug Delivery.
Flemming, R. G., Murphy, C. J., Abrams, G. A., Goodman, S. L. and Nealey, P. F.
(1999). Effects of synthetic micro- and nano-structured surfaces on cell
behavior. Biomaterials, 20(6), 573-588.
Fu, Y. and Kao, W. J. (2010). Drug release kinetics and transport mechanisms of
non-degradable and degradable polymeric delivery systems. Expert Opinion
on Drug Delivery, 7(4), 429-444.
-
134
Fuchs, J. R., Nasseri, B. A. and Vacanti, J. P. (2001). Tissue engineering: A 21st
century solution to surgical reconstruction. Annals of Thoracic Surgery,
72(2), 577-591.
Garlick, J. (2007). Engineering Skin to Study Human Disease – Tissue Models for
Cancer Biology and Wound Repair. In K. Lee & D. Kaplan (Eds.), Tissue
Engineering II (Vol. 103, pp. 207-239): Springer Berlin Heidelberg.
Gaumer, J., Prasad, A., Lee, D. and Lannutti, J. (2009). Structure-function
relationships and source-to-ground distance in electrospun polycaprolactone.
Acta Biomaterialia, 5(5), 1552-1561.
Ghasemi-Mobarakeh, L., Semnani, D. and Morshed, M. (2007). A novel method for
porosity measurement of various surface layers of nanofibers mat using
image analysis for tissue engineering applications. Journal of Applied
Polymer Science, 106(4), 2536-2542.
Gibson, P., Schreuder-Gibson, H. and Rivin, D. (2001). Transport properties of
porous membranes based on electrospun nanofibers. Colloids and Surfaces
A: Physicochemical and Engineering Aspects, 187-188, 469-481.
Gibson, P. W., Schreuder-Gibson, H. L. and Rivin, D. (1999). Electrospun fiber
mats: Transport properties. AIChE Journal, 45(1), 190-195.
Green, A. M., Jansen, J. A., van der Waerden, J. P. C. M. and Von Recum, A. F.
(1994). Fibroblast response to microtextured silicone surfaces: Texture
orientation into or out of the surface. Journal of Biomedical Materials
Research, 28(5), 647-653.
Gunatillake, P. A., Adhikari, R. and Gadegaard, N. (2003). Biodegradable synthetic
polymers for tissue engineering. European Cells and Materials, 5, 1-16.
Guo, H.-F., Li, Z.-S., Dong, S.-W., Chen, W.-J., Deng, L., Wang, Y.-F., et al.
(2012). Piezoelectric PU/PVDF electrospun scaffolds for wound healing
applications. Colloids and Surfaces B: Biointerfaces, 96(0), 29-36.
Hajra, M. G., Mehta, K. and Chase, G. G. (2003). Effects of humidity, temperature,
and nanofibers on drop coalescence in glass fiber media. Separation and
Purification Technology, 30(1), 79-88.
Harding, K. G., Morris, H. L. and Patel, G. K. (2002). Healing chronic wounds (Vol.
324).
-
135
Harish Prashanth, K. V. and Tharanathan, R. N. (2007). Chitin/chitosan:
modifications and their unlimited application potential—an overview. Trends
in Food Science & Technology, 18(3), 117-131.
Harris, L. D., Kim, B. S. and Mooney, D. J. (1998). Open pore biodegradable
matrices formed with gas foaming. Journal of Biomedical Materials
Research, 42(3), 396-402.
Haslik, W., Kamolz, L. P., Nathschläger, G., Andel, H., Meissl, G. and Frey, M.
(2007). First experiences with the collagen-elastin matrix Matriderm® as a
dermal substitute in severe burn injuries of the hand. Burns, 33(3), 364-368.
He, C. L., Huang, Z. M., Han, X. J., Liu, L., Zhang, H. S. and Chen, L. S. (2006).
Coaxial electrospun poly(L-lactic acid) ultrafine fibers for sustained drug
delivery. Journal of Macromolecular Science, Part B: Physics, 45 B(4), 515-
524.
He, C. L., Huang, Z. M., Han, X. J., Liu, L., Zhang, H. S. and Chen, L. S. (2006).
Coaxial Electrospun Poly(L‐Lactic Acid) Ultrafine Fibers for Sustained Drug
Delivery. Journal of Macromolecular Science, Part B, 45(4), 515-524.
Heikkilä, P. and Harlin, A. (2008). Parameter study of electrospinning of polyamide-
6. European Polymer Journal, 44(10), 3067-3079.
Heitland, A., Piatkowski, A., Noah, E. M. and Pallua, N. (2004). Update on the use
of collagen/glycosaminoglycate skin substitute—six years of experiences
with artificial skin in 15 German burn centers. Burns, 30(5), 471-475.
Ho, M. H., Kuo, P. Y., Hsieh, H. J., Hsien, T. Y., Hou, L. T., Lai, J. Y., et al. (2004).
Preparation of porous scaffolds by using freeze-extraction and freeze-gelation
methods. Biomaterials, 25(1), 129-138.
Homayoni, H., Ravandi, S. A. H. and Valizadeh, M. (2009a). Electrospinning of
chitosan nanofibers: Processing optimization. Carbohydrate Polymers, 77(3),
656-661.
Homayoni, H., Ravandi, S. A. H. and Valizadeh, M. (2009b). Influence of the
molecular weight of chitosan on the spinnability of chitosan/poly(vinyl
alcohol) blend nanofibers. Journal of Applied Polymer Science, 113(4), 2507-
2513.
Hong, K. H. (2007). Preparation and properties of electrospun poly(vinyl
alcohol)/silver fiber web as wound dressings. Polymer Engineering &
Science, 47(1), 43-49.
-
136
Hsu, C.-M. and Shivkumar, S. (2004). N,N-Dimethylformamide Additions to the
Solution for the Electrospinning of Poly(ε-caprolactone) Nanofibers.
Macromolecular Materials and Engineering, 289(4), 334-340.
Hsu, F.-Y., Hung, Y.-S., Liou, H.-M. and Shen, C.-H. (2010). Electrospun
hyaluronate–collagen nanofibrous matrix and the effects of varying the
concentration of hyaluronate on the characteristics of foreskin fibroblast
cells. Acta Biomaterialia, 6(6), 2140-2147.
Hsu, Y.-Y., Gresser, J. D., Trantolo, D. J., Lyons, C. M., Gangadharam, P. R. J. and
Wise, D. L. (1997). Effect of polymer foam morphology and density on
kinetics of in vitro controlled release of isoniazid from compressed foam
matrices. Journal of Biomedical Materials Research, 35(1), 107-116.
Huang, X. and Brazel, C. S. (2001). On the importance and mechanisms of burst
release in matrix-controlled drug delivery systems. Journal of Controlled
Release, 73(2–3), 121-136.
Huang, Z.-M., He, C.-L., Yang, A., Zhang, Y., Han, X.-J., Yin, J., et al. (2006).
Encapsulating drugs in biodegradable ultrafine fibers through co-axial
electrospinning. Journal of Biomedical Materials Research Part A, 77A(1),
169-179.
Huang, Z.-M., Zhang, Y. Z., Kotaki, M. and Ramakrishna, S. (2003). A review on
polymer nanofibers by electrospinning and their applications in
nanocomposites. Composites Science and Technology, 63(15), 2223-2253.
Humphires, M. J. and Newham, P. (1998). The structure of cell-adhesion molecules.
Trends in Cell Biology, 8(2), 78-83.
Hutmacher, D. W. (2001). Scaffold design and fabrication technologies for
engineering tissues — state of the art and future perspectives. Journal of
Biomaterials Science, Polymer Edition, 12(1), 107-124.
Huttenlocher, A., Sandborg, R. R. and Horwitz, A. F. (1995). Adhesion in cell
migration. Current Opinion in Cell Biology, 7(5), 697-706.
Jayarama Reddy, V., Radhakrishnan, S., Ravichandran, R., Mukherjee, S.,
Balamurugan, R., Sundarrajan, S., et al. (2013). Nanofibrous structured
biomimetic strategies for skin tissue regeneration. Wound Repair and
Regeneration, 21(1), 1-16.
Jeong, S. I., Lee, A.-Y., Lee, Y. M. and Shin, H. (2008). Electrospun gelatin/poly(L-
lactide-co-ε-caprolactone) nanofibers for mechanically functional tissue-
-
137
engineering scaffolds. Journal of Biomaterials Science, Polymer Edition,
19(3), 339-357.
Jeun, J. P., Lim, Y. M. and Nho, Y. C. (2005). Study on Morphology of Electrospun
Poly(caprolactone) Nanofiber. [Article]. Journal of Industrial and
Engineering Chemistry, 11(4), 573-578.
Ji, W., Yang, F., van den Beucken, J. J. J. P., Bian, Z., Fan, M., Chen, Z., et al.
(2010). Fibrous scaffolds loaded with protein prepared by blend or coaxial
electrospinning. Acta Biomaterialia, 6(11), 4199-4207.
Jiang, H., Hu, Y., Li, Y., Zhao, P., Zhu, K. and Chen, W. (2005). A facile technique
to prepare biodegradable coaxial electrospun nanofibers for controlled release
of bioactive agents. Journal of Controlled Release, 108(2–3), 237-243.
Jin, G., Prabhakaran, M. P., Nadappuram, B. P., Singh, G., Kai, D. and
Ramakrishna, S. (2012). Electrospun Poly(L-Lactic Acid)-co-Poly(ϵ-
Caprolactone) Nanofibres Containing Silver Nanoparticles for Skin-Tissue
Engineering. Journal of Biomaterials Science, Polymer Edition, 23(18),
2337-2352.
Jung, S.-N., Chung, J.-W., Yim, Y.-M. and Kwon, H. (2008). One-Stage Skin
Grafting of the Exposed Skull With Acellular Human Dermis (AlloDerm).
Journal of Craniofacial Surgery, 19(6), 1660-1662.
Kai, D., Jin, G., Prabhakaran, M. P. and Ramakrishna, S. (2013). Electrospun
synthetic and natural nanofibers for regenerative medicine and stem cells.
Biotechnology Journal, 8(1), 59-72.
Kamel, R. A., Ong, J. F., Eriksson, E., Junker, J. P. E. and Caterson, E. J. (2013).
Tissue Engineering of Skin. Journal of the American College of Surgeons,
217(3), 533-555.
Karageorgiou, V. and Kaplan, D. (2005). Porosity of 3D biomaterial scaffolds and
osteogenesis. Biomaterials, 26(27), 5474-5491.
Karande, T. S., Ong, J. L. and Agrawal, C. M. (2004). Diffusion in musculoskeletal
tissue engineering scaffolds: Design issues related to porosity, permeability,
architecture, and nutrient mixing. Annals of Biomedical Engineering, 32(12),
1728-1743.
Kariduraganavar, M. Y., Davis, F. J., Mitchell, G. R. and Olley, R. H. (2010). Using
an additive to control the electrospinning of fibres of poly(ε-caprolactone).
Polymer International, 59(6), 827-835.
-
138
Karuppuswamy, P., Reddy Venugopal, J., Navaneethan, B., Luwang Laiva, A. and
Ramakrishna, S. Polycaprolactone nanofibers for the controlled release of
tetracycline hydrochloride. Materials Letters, (0).
Katoh, K., Tanabe, T. and Yamauchi, K. (2004). Novel approach to fabricate keratin
sponge scaffolds with controlled pore size and porosity. Biomaterials,
25(18), 4255-4262.
Keane, T. J. and Badylak, S. F. (2014). Biomaterials for tissue engineering
applications. Seminars in Pediatric Surgery, 23(3), 112-118.
Kearney, J. N. (2001). Clinical evaluation of skin substitutes. Burns, 27(5), 545-551.
Kenawy, E.-R., Abdel-Hay, F. I., El-Newehy, M. H. and Wnek, G. E. (2007).
Controlled release of ketoprofen from electrospun poly(vinyl alcohol)
nanofibers. Materials Science and Engineering: A, 459(1–2), 390-396.
Kenawy, E.-R., Bowlin, G. L., Mansfield, K., Layman, J., Simpson, D. G., Sanders,
E. H., et al. (2002). Release of tetracycline hydrochloride from electrospun
poly(ethylene-co-vinylacetate), poly(lactic acid), and a blend. Journal of
Controlled Release, 81(1–2), 57-64.
Kenawy, E. R., Abdel-Hay, F. I., El-Newehy, M. H. and Wnek, G. E. (2007).
Controlled release of ketoprofen from electrospun poly(vinyl alcohol)
nanofibers. Materials Science and Engineering A, 459(1-2), 390-396.
Kenawy, E. R., Bowlin, G. L., Mansfield, K., Layman, J., Simpson, D. G., Sanders,
E. H., et al. (2002). Release of tetracycline hydrochloride from electrospun
poly(ethylene-co-vinylacetate), poly(lactic acid), and a blend. Journal of
Controlled Release, 81(1-2), 57-64.
Khil, M. S., Cha, D. I., Kim, H. Y., Kim, I. S. and Bhattarai, N. (2003). Electrospun
Nanofibrous Polyurethane Membrane as Wound Dressing. Journal of
Biomedical Materials Research - Part B Applied Biomaterials, 67(2), 675-
679.
Ki, C. S., Baek, D. H., Gang, K. D., Lee, K. H., Um, I. C. and Park, Y. H. (2005).
Characterization of gelatin nanofiber prepared from gelatin-formic acid
solution. Polymer, 46(14), 5094-5102.
Kim, J. H., Choung, P. H., Kim, I. Y., Lim, K. T., Son, H. M., Choung, Y. H., et al.
(2009). Electrospun nanofibers composed of poly(ε-caprolactone) and
polyethylenimine for tissue engineering applications. Materials Science and
Engineering C, 29(5), 1725-1731.
-
139
Kim, K., Luu, Y. K., Chang, C., Fang, D., Hsiao, B. S., Chu, B., et al. (2004).
Incorporation and controlled release of a hydrophilic antibiotic using
poly(lactide-co-glycolide)-based electrospun nanofibrous scaffolds. Journal
of Controlled Release, 98(1), 47-56.
Kim, K., Yu, M., Zong, X., Chiu, J., Fang, D., Seo, Y.-S., et al. (2003). Control of
degradation rate and hydrophilicity in electrospun non-woven poly(d,l-
lactide) nanofiber scaffolds for biomedical applications. Biomaterials,
24(27), 4977-4985.
Kim, S. S., Sun Park, M., Jeon, O., Yong Choi, C. and Kim, B. S. (2006).
Poly(lactide-co-glycolide)/hydroxyapatite composite scaffolds for bone tissue
engineering. Biomaterials, 27(8), 1399-1409.
Kim, T. G., Lee, D. S. and Park, T. G. (2007). Controlled protein release from
electrospun biodegradable fiber mesh composed of poly(ɛ-caprolactone) and
poly(ethylene oxide). International Journal of Pharmaceutics, 338(1–2),
276-283.
Kim, T. G., Lee, D. S. and Park, T. G. (2007). Controlled protein release from
electrospun biodegradable fiber mesh composed of poly(ε-caprolactone) and
poly(ethylene oxide). International Journal of Pharmaceutics, 338(1-2), 276-
283.
Kowalczyk, T., Nowicka, A., Elbaum, D. and Kowalewski, T. A. (2008).
Electrospinning of Bovine Serum Albumin. Optimization and the Use for
Production of Biosensors. Biomacromolecules, 9(7), 2087-2090.
Krause, B., Koops, G. H., Van Der Vegt, N. F. A., Wessling, M., Wübbenhorst, M.
and Van Turnhout, J. (2002). Ultralow-k dielectrics made by supercritical
foaming of thin polymer films. Advanced Materials, 14(15), 1041-1046.
Krause, B., Mettinkhof, R., Van Der Vegt, N. F. A. and Wessling, M. (2001).
Microcellular foaming of amorphous high-Tg polymers using carbon dioxide.
Macromolecules, 34(4), 874-884.
Krause, B., Van Der Vegt, N. F. A. and Wessling, M. (2002). Open nanoporous
morphologies from polymeric blends by carbon dioxide foaming.
Macromolecules, 35(5), 1738-1745.
Kurpinski, K. T., Stephenson, J. T., Janairo, R. R. R., Lee, H. and Li, S. (2010). The
effect of fiber alignment and heparin coating on cell infiltration into
nanofibrous PLLA scaffolds. Biomaterials, 31(13), 3536-3542.
-
140
Langer, R. and Vacanti, J. (1993). Tissue engineering. Science, 260(5110), 920-926.
Langer, R. and Vacanti, J. P. (1993). Tissue engineering. Science, 260(5110), 920-
926.
Lao, L. L., Venkatraman, S. S. and Peppas, N. A. (2008). Modeling of drug release
from biodegradable polymer blends. European Journal of Pharmaceutics and
Biopharmaceutics, 70(3), 796-803.
Lee, K. H., Kim, H. Y., Khil, M. S., Ra, Y. M. and Lee, D. R. (2003).
Characterization of nano-structured poly(ε-caprolactone) nonwoven mats via
electrospinning. Polymer, 44(4), 1287-1294.
Li, A., Simmons, P. J. and Kaur, P. (1998). Identification and isolation of candidate
human keratinocyte stem cells based on cell surface phenotype. Proceedings
of the National Academy of Sciences, 95(7), 3902-3907.
Li, L. and Hsieh, Y.-L. (2006). Chitosan bicomponent nanofibers and nanoporous
fibers. Carbohydrate Research, 341(3), 374-381.
Li, W.-J., Laurencin, C. T., Caterson, E. J., Tuan, R. S. and Ko, F. K. (2002).
Electrospun nanofibrous structure: A novel scaffold for tissue engineering.
Journal of Biomedical Materials Research, 60(4), 613-621.
Li, W. J., Tuli, R., Okafor, C., Derfoul, A., Danielson, K. G., Hall, D. J., et al.
(2005). A three-dimensional nanofibrous scaffold for cartilage tissue
engineering using human mesenchymal stem cells. Biomaterials, 26(6), 599-
609.
Li, X., Su, Y., Liu, S., Tan, L., Mo, X. and Ramakrishna, S. (2010). Encapsulation of
proteins in poly(l-lactide-co-caprolactone) fibers by emulsion
electrospinning. Colloids and Surfaces B: Biointerfaces, 75(2), 418-424.
Li, X., Zhang, H., Li, H., Tang, G., Zhao, Y. and Yuan, X. (2008). Self-accelerated
biodegradation of electrospun poly(ethylene glycol)-poly(l-lactide)
membranes by loading proteinase K. Polymer Degradation and Stability,
93(3), 618-626.
Li, X., Zhang, H., Li, H., Tang, G., Zhao, Y. and Yuan, X. (2008). Self-accelerated
biodegradation of electrospun poly(ethylene glycol)–poly(l-lactide)
membranes by loading proteinase K. Polymer Degradation and Stability,
93(3), 618-626.
-
141
Liao, S., Ramakrishna, S. and Ramalingam, M. (2012). Electrospun Nanofiber and
Stem Cells in Tissue Engineering Integrated Biomaterials in Tissue
Engineering (pp. 91-118): John Wiley & Sons, Inc.
Lim, S. H. and Mao, H.-Q. (2009). Electrospun scaffolds for stem cell engineering.
Advanced Drug Delivery Reviews, 61(12), 1084-1096.
Limat, A., Mauri, D. and Hunziker, T. (1996). Successful Treatment of Chronic Leg
Ulcers with Epidermal Equivalents Generated from Cultured Autologous
Outer Root Sheath Cells. [Original Article]. J Investig Dermatol, 107(1),
128-135.
Lin, C.-C. and Metters, A. T. (2006). Hydrogels in controlled release formulations:
Network design and mathematical modeling. Advanced Drug Delivery
Reviews, 58(12–13), 1379-1408.
Lips, P. A. M., Velthoen, I. W., Dijkstra, P. J., Wessling, M. and Feijen, J. (2005).
Gas foaming of segmented poly(ester amide) films. Polymer, 46(22), 9396-
9403.
Liu, N., Chen, X.-G., Park, H.-J., Liu, C.-G., Liu, C.-S., Meng, X.-H., et al. (2006).
Effect of MW and concentration of chitosan on antibacterial activity of
Escherichia coli. Carbohydrate Polymers, 64(1), 60-65.
Liu, X., Lin, T., Fang, J., Yao, G., Zhao, H., Dodson, M., et al. (2010). In vivo
wound healing and antibacterial performances of electrospun nanofibre
membranes. Journal of Biomedical Materials Research Part A, 94A(2), 499-
508.
Loh, X. J., Peh, P., Liao, S., Sng, C. and Li, J. (2010). Controlled drug release from
biodegradable thermoresponsive physical hydrogel nanofibers. Journal of
Controlled Release, 143(2), 175-182.
Lowery, J. L., Datta, N. and Rutledge, G. C. (2010). Effect of fiber diameter, pore
size and seeding method on growth of human dermal fibroblasts in
electrospun poly(ε-caprolactone) fibrous mats. Biomaterials, 31(3), 491-504.
Luong-Van, E., Grøndahl, L., Chua, K. N., Leong, K. W., Nurcombe, V. and Cool,
S. M. (2006). Controlled release of heparin from poly(ε-caprolactone)
electrospun fibers. Biomaterials, 27(9), 2042-2050.
Ma, P. X. and Choi, J. W. (2001). Biodegradable polymer scaffolds with well-
defined interconnected spherical pore network. Tissue Engineering, 7(1), 23-
33.
-
142
Ma, Z., Kotaki, M. and Ramakrishna, S. (2005). Electrospun cellulose nanofiber as
affinity membrane. Journal of Membrane Science, 265(1-2), 115-123.
MacNeil, S. (2007). Progress and opportunities for tissue-engineered skin.
[10.1038/nature05664]. Nature, 445(7130), 874-880.
MacNeil, S. (2008). Biomaterials for tissue engineering of skin. Materials Today,
11(5), 26-35.
Malheiro, V. N., Caridade, S. G., Alves, N. M. and Mano, J. F. (2010). New poly(ε-
caprolactone)/chitosan blend fibers for tissue engineering applications. Acta
Biomaterialia, 6(2), 418-428.
Maneerung, T., Tokura, S. and Rujiravanit, R. (2008). Impregnation of silver
nanoparticles into bacterial cellulose for antimicrobial wound dressing.
Carbohydrate Polymers, 72(1), 43-51.
Maretschek, S., Greiner, A. and Kissel, T. (2008). Electrospun biodegradable
nanofiber nonwovens for controlled release of proteins. Journal of
Controlled Release, 127(2), 180-187.
Mario, G. and Gabriele, G. (2005). Mathematical Modelling and Controlled Drug
Delivery: Matrix Systems. Current Drug Delivery, 2(1), 97-116.
Marler, J. J., Upton, J., Langer, R. and Vacanti, J. P. (1998). Transplantation of cells
in matrices for tissue regeneration. Advanced Drug Delivery Reviews, 33(1–
2), 165-182.
Mataram, A., Ismail, A. F. and Matsuura, T. (2012). Polyacrylonitrile Nanofiber
Assembled by Electrospinning: Effect of Dope Concentrations on the
Structural and Pore Characterizations Sustainable Membrane Technology for
Energy, Water, and Environment (pp. 51-58): John Wiley & Sons, Inc.
Matthews, J. A., Wnek, G. E., Simpson, D. G. and Bowlin, G. L. (2002).
Electrospinning of collagen nanofibers. Biomacromolecules, 3(2), 232-238.
Meinel, A. J., Germershaus, O., Luhmann, T., Merkle, H. P. and Meinel, L. (2012).
Electrospun matrices for localized drug delivery: Current technologies and
selected biomedical applications. European Journal of Pharmaceutics and
Biopharmaceutics, 81(1), 1-13.
Meng, Z. X., Xu, X. X., Zheng, W., Zhou, H. M., Li, L., Zheng, Y. F., et al. (2011).
Preparation and characterization of electrospun PLGA/gelatin nanofibers as a
potential drug delivery system. Colloids and Surfaces B: Biointerfaces,
84(1), 97-102.
-
143
Meng, Z. X., Zheng, W., Li, L. and Zheng, Y. F. (2011). Fabrication,
characterization and in vitro drug release behavior of electrospun
PLGA/chitosan nanofibrous scaffold. Materials Chemistry and Physics,
125(3), 606-611.
Meuli, M. and Raghunath, M. (1997). Tops and flops using cultured epithelial
autografts in children. Pediatric Surgery International, 12(7), 471-477.
Mikos, A. G., Sarakinos, G., Leite, S. M., Vacant, J. P. and Langer, R. (1993).
Laminated three-dimensional biodegradable foams for use in tissue
engineering. Biomaterials, 14(5), 323-330.
Mikos, A. G., Thorsen, A. J., Czerwonka, L. A., Bao, Y., Langer, R., Winslow, D.
N., et al. (1994). Preparation and characterization of poly(l-lactic acid)
foams. Polymer, 35(5), 1068-1077.
Min, H., Qingkai, W., Miao, D., Peirong, X., Chaochen, G., Xiang, J., et al. (2015).
Fabrication of electrospun thermoplastic polyurethane blended poly (l-
lactide-co-e-caprolactone) microyarn scaffolds for engineering of female
pelvic-floor tissue. Biomedical Materials, 10(1), 015005.
Moghe, A. K., Hufenus, R., Hudson, S. M. and Gupta, B. S. (2009). Effect of the
addition of a fugitive salt on electrospinnability of poly(ε-caprolactone).
Polymer, 50(14), 3311-3318.
Montazer, M. and Malekzadeh, S. B. (2012). Electrospun antibacterial nylon
nanofibers through in situ synthesis of nanosilver: preparation and
characteristics. Journal of Polymer Research, 19(10), 1-6.
Mooney, D. J., Baldwin, D. F., Suh, N. P., Vacanti, J. P. and Langer, R. (1996).
Novel approach to fabricate porous sponges of poly(d,l-lactic-co-glycolic
acid) without the use of organic solvents. Biomaterials, 17(14), 1417-1422.
Moore, K., McCallion, R., Searle, R. J., Stacey, M. C. and Harding, K. G. (2006).
Prediction and monitoring the therapeutic response of chronic dermal
wounds. International Wound Journal, 3(2), 89-98.
Narasimhan, B. (2001). Mathematical models describing polymer dissolution:
consequences for drug delivery. Advanced Drug Delivery Reviews, 48(2–3),
195-210.
Narasimhan, B. and Peppas, N. A. (1997). Molecular analysis of drug delivery
systems controlled by dissolution of the polymer carrier. Journal of
Pharmaceutical Sciences, 86(3), 297-304.
-
144
Nelson, C. M. and Bissell, M. J. (2006). Of Extracellular Matrix, Scaffolds, and
Signaling: Tissue Architecture Regulates Development, Homeostasis, and
Cancer. Annual Review of Cell and Developmental Biology, 22(1), 287-309.
Ngawhirunpat, T., Opanasopit, P., Rojanarata, T., Akkaramongkolporn, P.,
Ruktanonchai, U. and Supaphol, P. (2009). Development of meloxicam-
loaded electrospun polyvinyl alcohol mats as a transdermal therapeutic agent.
Pharmaceutical Development and Technology, 14(1), 70-79.
Nguyen, T.-H., Lee, K.-H. and Lee, B.-T. (2010). Fabrication of Ag nanoparticles
dispersed in PVA nanowire mats by microwave irradiation and electro-
spinning. Materials Science and Engineering: C, 30(7), 944-950.
Norouzi, M., Soleimani, M., Shabani, I., Atyabi, F., Ahvaz, H. H. and Rashidi, A.
(2013). Protein encapsulated in electrospun nanofibrous scaffolds for tissue
engineering applications. Polymer International, 62(8), 1250-1256.
O'Connor, N., Mulliken, J., Banks-Schlegel, S., Kehinde, O. and Green, H. (1981).
GRAFTING OF BURNS WITH CULTURED EPITHELIUM PREPARED
FROM AUTOLOGOUS EPIDERMAL CELLS. The Lancet, 317(8211), 75-
78.
Ohyama, M. (2007). Advances in the Study of Stem-Cell-Enriched Hair Follicle
Bulge Cells: A Review Featuring Characterization and Isolation of Human
Bulge Cells. Dermatology, 214(4), 342-351.
Papenburg, B. J., Vogelaar, L., Bolhuis-Versteeg, L. A. M., Lammertink, R. G. H.,
Stamatialis, D. and Wessling, M. (2007). One-step fabrication of porous
micropatterned scaffolds to control cell behavior. Biomaterials, 28(11), 1998-
2009.
Papini, R. (2004). ABC of burns: Management of burn injuries of various depths.
British Medical Journal, 329(7458), 158-160.
Papini, R. (2004). Management of burn injuries of various depths (Vol. 329).
Pham, C., Greenwood, J., Cleland, H., Woodruff, P. and Maddern, G. (2007).
Bioengineered skin substitutes for the management of burns: A systematic
review. Burns, 33(8), 946-957.
Phipps, M. C., Clem, W. C., Grunda, J. M., Clines, G. A. and Bellis, S. L. (2012).
Increasing the pore sizes of bone-mimetic electrospun scaffolds comprised of
polycaprolactone, collagen I and hydroxyapatite to enhance cell infiltration.
Biomaterials, 33(2), 524-534.
-
145
Piras, A. M., Nikkola, L., Chiellini, F., Ashammakhi, N. and Chiellini, E. (2006).
Development of diclofenac sodium releasing bio-erodible polymeric
nanomats. Journal of Nanoscience and Nanotechnology, 6(9-10), 3310-3320.
Place, E. S., Evans, N. D. and Stevens, M. M. (2009). Complexity in biomaterials for
tissue engineering. [10.1038/nmat2441]. Nat Mater, 8(6), 457-470.
Ponticiello, M. S., Schinagl, R. M., Kadiyala, S. and Barry, F. P. (2000). Gelatin-
based resorbable sponge as a carrier matrix for human mesenchymal stem
cells in cartilage regeneration therapy. Journal of Biomedical Materials
Research, 52(2), 246-255.
Powell, H. M., Supp, D. M. and Boyce, S. T. (2008). Influence of electrospun
collagen on wound contraction of engineered skin substitutes. Biomaterials,
29(7), 834-843.
Qi, Hu, P., Xu, J. and Wang. (2006). Encapsulation of Drug Reservoirs in Fibers by
Emulsion Electrospinning: Morphology Characterization and Preliminary
Release Assessment. Biomacromolecules, 7(8), 2327-2330.
Qi, H., Hu, P., Xu, J. and Wang, A. (2006). Encapsulation of drug reservoirs in
fibers by emulsion electrospinning: Morphology characterization and
preliminary release assessment. Biomacromolecules, 7(8), 2327-2330.
Ramakrishna, S., Mayer, J., Wintermantel, E. and Leong, K. W. (2001). Biomedical
applications of polymer-composite materials: A review. Composites Science
and Technology, 61(9), 1189-1224.
Ranganath, S. H. and Wang, C.-H. (2008). Biodegradable microfiber implants
delivering paclitaxel for post-surgical chemotherapy against malignant
glioma. Biomaterials, 29(20), 2996-3003.
Ranganath, S. H. and Wang, C. H. (2008). Biodegradable microfiber implants
delivering paclitaxel for post-surgical chemotherapy against malignant
glioma. Biomaterials, 29(20), 2996-3003.
Ravichandran, R., Sundarrajan, S., Venugopal, J. R., Mukherjee, S. and
Ramakrishna, S. (2012). Advances in Polymeric Systems for Tissue
Engineering and Biomedical Applications. Macromolecular Bioscience,
12(3), 286-311.
Reneker, D. H. and Chun, I. (1996). Nanometre diameter fibres of polymer,
produced by electrospinning. Nanotechnology, 7(3), 216-223.
-
146
Reneker, D. H. and Yarin, A. L. (2008). Electrospinning jets and polymer
nanofibers. Polymer, 49(10), 2387-2425.
Reneker, D. H., Yarin, A. L., Fong, H. and Koombhongse, S. (2000). Bending
instability of electrically charged liquid jets of polymer solutions in
electrospinning. Journal of Applied Physics, 87(9 I), 4531-4547.
Rezwan, K., Chen, Q. Z., Blaker, J. J. and Boccaccini, A. R. (2006). Biodegradable
and bioactive porous polymer/inorganic composite scaffolds for bone tissue
engineering. Biomaterials, 27(18), 3413-3431.
Rheinwald, J. G. and Green, H. (1977). Epidermal growth factor and the
multiplication of cultured human epidermal keratinocytes.
[10.1038/265421a0]. Nature, 265(5593), 421-424.
Rheinwatd, J. G. and Green, H. (1975). Seria cultivation of strains of human
epidemal keratinocytes: the formation keratinizin colonies from single cell is.
Cell, 6(3), 331-343.
Rnjak-Kovacina, J., Wise, S. G., Li, Z., Maitz, P. K. M., Young, C. J., Wang, Y., et
al. (2011). Tailoring the porosity and pore size of electrospun synthetic
human elastin scaffolds for dermal tissue engineering. Biomaterials, 32(28),
6729-6736.
Roozbahani, F., Sultana, N., Fauzi Ismail, A. and Nouparvar, H. (2013). Effects of
Chitosan Alkali Pretreatment on the Preparation of Electrospun
PCL/Chitosan Blend Nanofibrous Scaffolds for Tissue Engineering
Application. Journal of Nanomaterials, 2013, 6.
RoyChowdhury, P. and Kumar, V. (2006). Fabrication and evaluation of porous 2,3-
dialdehydecellulose membrane as a potential biodegradable tissue-
engineering scaffold. Journal of Biomedical Materials Research - Part A,
76(2), 300-309.
Rujitanaroj, P.-o., Pimpha, N. and Supaphol, P. (2008). Wound-dressing materials
with antibacterial activity from electrospun gelatin fiber mats containing
silver nanoparticles. Polymer, 49(21), 4723-4732.
Ryu, Y. J., Kim, H. Y., Lee, K. H., Park, H. C. and Lee, D. R. (2003). Transport
properties of electrospun nylon 6 nonwoven mats. European Polymer
Journal, 39(9), 1883-1889.
Said, S. S., El-Halfawy, O. M., El-Gowelli, H. M., Aloufy, A. K., Boraei, N. A. and
El-Khordagui, L. K. (2012). Bioburden-responsive antimicrobial PLGA
-
147
ultrafine fibers for wound healing. European Journal of Pharmaceutics and
Biopharmaceutics, 80(1), 85-94.
Sanders, J. E., Stiles, C. E. and Hayes, C. L. (2000). Tissue response to single-
polymer fibers of varying diameters: Evaluation of fibrous encapsulation and
macrophage density. Journal of Biomedical Materials Research, 52(1), 231-
237.
Schiffman, J. D. and Schauer, C. L. (2008). A Review: Electrospinning of
Biopolymer Nanofibers and their Applications. Polymer Reviews, 48(2), 317-
352.
Schneider, A., Wang, X. Y., Kaplan, D. L., Garlick, J. A. and Egles, C. (2009).
Biofunctionalized electrospun silk mats as a topical bioactive dressing for
accelerated wound healing. Acta Biomaterialia, 5(7), 2570-2578.
Schreuder-Gibson, H., Gibson, P., Senecal, K., Sennett, M., Walker, J., Yeomans,
W., et al. (2002). Protective textile materials based on electrospun nanofibers.
Journal of Advanced Materials, 34(3), 44-55.
Scott, J. E. (1995). Extracellular matrix, supramolecular organisation and shape.
Journal of Anatomy, 187(Pt 2), 259-269.
Serra, L., Doménech, J. and Peppas, N. A. (2006). Drug transport mechanisms and
release kinetics from molecularly designed poly(acrylic acid-g-ethylene
glycol) hydrogels. Biomaterials, 27(31), 5440-5451.
Shakespeare, P. (2001). Burn wound healing and skin substitutes. Burns, 27(5), 517-
522.
Shakespeare, P. G. (2005). The role of skin substitutes in the treatment of burn
injuries. Clinics in Dermatology, 23(4), 413-418.
Shalumon, K. T., Anulekha, K. H., Girish, C. M., Prasanth, R., Nair, S. V. and
Jayakumar, R. (2010). Single step electrospinning of
chitosan/poly(caprolactone) nanofibers using formic acid/acetone solvent
mixture. Carbohydrate Polymers, 80(2), 413-419.
Shalumon, K. T., Anulekha, K. H., Nair, S. V., Nair, S. V., Chennazhi, K. P. and
Jayakumar, R. (2011). Sodium alginate/poly(vinyl alcohol)/nano ZnO
composite nanofibers for antibacterial wound dressings. International
Journal of Biological Macromolecules, 49(3), 247-254.
-
148
Sharma, V. K., Yngard, R. A. and Lin, Y. (2009). Silver nanoparticles: Green
synthesis and their antimicrobial activities. Advances in Colloid and Interface
Science, 145(1–2), 83-96.
Shevchenko, R. V., James, S. L. and James, S. E. (2010). A review of tissue-
engineered skin bioconstructs available for skin reconstruction. Journal of
The Royal Society Interface, 7(43), 229-258.
Shin, M., Ishii, O., Sueda, T. and Vacanti, J. P. (2004). Contractile cardiac grafts
using a novel nanofibrous mesh. Biomaterials, 25(17), 3717-3723.
Shin, Y. M., Hohman, M. M., Brenner, M. P. and Rutledge, G. C. (2001).
Experimental characterization of electrospinning: the electrically forced jet
and instabilities. Polymer, 42(25), 09955-09967.
Siepmann, J. and Göpferich, A. (2001). Mathematical modeling of bioerodible,
polymeric drug delivery systems. Advanced Drug Delivery Reviews, 48(2–3),
229-247.
Sill, T. J. and von Recum, H. A. (2008). Electrospinning: applications in drug
delivery and tissue engineering. Biomaterials, 29(13), 1989-2006.
Singh, L., Kumar, V. and Ratner, B. D. (2004). Generation of porous microcellular
85/15 poly (DL-lactide-co-glycolide) foams for biomedical applications.
Biomaterials, 25(13), 2611-2617.
Son, B., Yeom, B.-Y., Song, S. H., Lee, C.-S. and Hwang, T. S. (2009).
Antibacterial electrospun chitosan/poly(vinyl alcohol) nanofibers containing
silver nitrate and titanium dioxide. Journal of Applied Polymer Science,
111(6), 2892-2899.
Son, W. K., Youk, J. H. and Park, W. H. (2006). Antimicrobial cellulose acetate
nanofibers containing silver nanoparticles. Carbohydrate Polymers, 65(4),
430-434.
Stamatialis, D. F., Papenburg, B. J., Gironés, M., Saiful, S., Bettahalli, S. N. M.,
Schmitmeier, S., et al. (2008). Medical applications of membranes: Drug
delivery, artificial organs and tissue engineering. Journal of Membrane
Science, 308(1–2), 1-34.
Stanton, R. A. and Billmire, D. A. (2002). Skin resurfacing for the burned patient.
Clinics in Plastic Surgery, 29(1), 29-51.
Steyaert, I., Van der Schueren, L., Rahier, H. and de Clerck, K. (2012). An
Alternative Solvent System for Blend Electrospinning of
-
149
Polycaprolactone/Chitosan Nanofibres. Macromolecular Symposia, 321-
322(1), 71-75.
Su, Y. and Mo, X. (2011). Dual drug release from coaxial electrospun nanofibers.
Journal of Controlled Release, 152, Supplement 1(0), e82-e84.
Subbiah, T., Bhat, G. S., Tock, R. W., Parameswaran, S. and Ramkumar, S. S.
(2005). Electrospinning of nanofibers. Journal of Applied Polymer Science,
96(2), 557-569.
Sultana, N. and Wang, M. (2008). Fabrication of HA/PHBV composite scaffolds
through the emulsion freezing/freeze-drying process and characterisation of
the scaffolds. Journal of Materials Science: Materials in Medicine, 19(7),
2555-2561.
Suwantong, O., Opanasopit, P., Ruktanonchai, U. and Supaphol, P. (2007).
Electrospun cellulose acetate fiber mats containing curcumin and release
characteristic of the herbal substance. Polymer, 48(26), 7546-7557.
Taepaiboon, P., Rungsardthong, U. and Supaphol, P. (2006). Drug-loaded
electrospun mats of poly(vinyl alcohol) fibres and their release characteristics
of four model drugs. Nanotechnology, 17(9), 2317-2329.
Taepaiboon, P., Rungsardthong, U. and Supaphol, P. (2007). Vitamin-loaded
electrospun cellulose acetate nanofiber mats as transdermal and dermal
therapeutic agents of vitamin A acid and vitamin E. European Journal of
Pharmaceutics and Biopharmaceutics, 67(2), 387-397.
Tang, C., Ozcam, A. E., Stout, B. and Khan, S. A. (2012). Effect of pH on Protein
Distribution in Electrospun PVA/BSA Composite Nanofibers.
Biomacromolecules, 13(5), 1269-1278.
Tessmar, J. K. and Göpferich, A. M. (2007). Matrices and scaffolds for protein
delivery in tissue engineering. Advanced Drug Delivery Reviews, 59(4–5),
274-291.
Thakur, R. A., Florek, C. A., Kohn, J. and Michniak, B. B. (2008). Electrospun
nanofibrous polymeric scaffold with targeted drug release profiles for
potential application as wound dressing. International Journal of
Pharmaceutics, 364(1), 87-93.
Theron, S. A., Zussman, E. and Yarin, A. L. (2004). Experimental investigation of
the governing parameters in the electrospinning of polymer solutions.
Polymer, 45(6), 2017-2030.
-
150
Thirugnanaselvam, M., Gobi, N. and Arun Karthick, S. (2013). SPI/PEO blended
electrospun martrix for wound healing. Fibers and Polymers, 14(6), 965-969.
Tumbar, T. (2006). Epithelial Skin Stem Cells. In K. Irina & L. Robert (Eds.),
Methods in Enzymology (Vol. Volume 419, pp. 73-99): Academic Press.
Tungprapa, S., Jangchud, I. and Supaphol, P. (2007). Release characteristics of four
model drugs from drug-loaded electrospun cellulose acetate fiber mats.
Polymer, 48(17), 5030-5041.
Twu, Y.-K., Chen, Y.-W. and Shih, C.-M. (2008). Preparation of silver nanoparticles
using chitosan suspensions. Powder Technology, 185(3), 251-257.
Valmikinathan, C. M., Defroda, S. and Yu, X. (2009). Polycaprolactone and Bovine
Serum Albumin Based Nanofibers for Controlled Release of Nerve Growth
Factor. Biomacromolecules, 10(5), 1084-1089.
Van der Schueren, L., De Schoenmaker, B., Kalaoglu, Ö. I. and De Clerck, K.
(2011). An alternative solvent system for the steady state electrospinning of
polycaprolactone. European Polymer Journal, 47(6), 1256-1263.
Van der Schueren, L., Steyaert, I., De Schoenmaker, B. and De Clerck, K. (2012).
Polycaprolactone/chitosan blend nanofibres electrospun from an acetic
acid/formic acid solvent system. Carbohydrate Polymers, 88(4), 1221-1226.
Vaquette, C. and Cooper-White, J. J. (2011). Increasing electrospun scaffold pore
size with tailored collectors for improved cell penetration. Acta
Biomaterialia, 7(6), 2544-2557.
Vatankhah, E., Prabhakaran, M. P., Jin, G., Ghasemi Mobarakeh, L. and
Ramakrishna, S. (2013). Development of nanofibrous cellulose
acetate/gelatin skin substitutes for variety wound treatment applications.
Journal of Biomaterials Applications.
Venugopal, J. R., Zhang, Y. and Ramakrishna, S. (2006). In Vitro Culture of Human
Dermal Fibroblasts on Electrospun Polycaprolactone Collagen Nanofibrous
Membrane. Artificial Organs, 30(6), 440-446.
Verreck, G., Chun, I., Rosenblatt, J., Peeters, J., Dijck, A. V., Mensch, J., et al.
(2003). Incorporation of drugs in an amorphous state into electrospun
nanofibers composed of a water-insoluble, nonbiodegradable polymer.
Journal of Controlled Release, 92(3), 349-360.
Verreck, G., Chun, I., Rosenblatt, J., Peeters, J., Van Dijck, A., Mensch, J., et al.
(2003). Incorporation of drugs in an amorphous state into electrospun
-
151
nanofibers composed of a water-insoluble, nonbiodegradable polymer.
Journal of Controlled Release, 92(3), 349-360.
Wan, H., Williams, R. L., Doherty, P. J. and Williams, D. F. (1997). A study of cell
behaviour on the surfaces of multifilament materials. Journal of Materials
Science: Materials in Medicine, 8(1), 45-51.
Wang, C., Yan, K. W., Lin, Y. D. and Hsieh, P. C. H. (2010). Biodegradable
core/shell fibers by coaxial electrospinning: Processing, fiber
characterization, and its application in sustained drug release.
Macromolecules, 43(15), 6389-6397.
Wang, H., Feng, Y., Zhao, H., Lu, J., Guo, J., Behl, M., et al. (2011). controlled
heparin release from electrospun gelatin fibers. Journal of Controlled
Release, 152, Supplement 1(0), e28-e29.
Wang, X., Drew, C., Lee, S. H., Senecal, K. J., Kumar, J. and Samuelson, L. A.
(2002). Electrospun Nanofibrous Membranes for Highly Sensitive Optical
Sensors. Nano Letters, 2(11), 1273-1275.
Wang, X., Kim, Y. G., Drew, C., Ku, B. C., Kumar, J. and Samuelson, L. A. (2004).
Electrostatic Assembly of Conjugated Polymer Thin Layers on Electrospun
Nanofibrous Membranes for Biosensors. Nano Letters, 4(2), 331-334.
Wang, X., Li, W. and Kumar, V. (2006). A method for solvent-free fabrication of
porous polymer using solid-state foaming and ultrasound for tissue
engineering applications. Biomaterials, 27(9), 1924-1929.
Wang, Y., wang, B., Qiao, W. and Yin, T. (2010). A novel controlled release drug
delivery system for multiple drugs based on electrospun nanofibers
containing nanoparticles. Journal of Pharmaceutical Sciences, 99(12), 4805-
4811.
Watt, F. M. and Dudhia, J. (1988). Prolonged expression of differentiated phenotype
by chondrocytes cultured at low density on a composite substrate of collagen
and agarose that restricts cell spreading. Differentiation, 38(2), 140-147.
Waymack, P., Duff, R. G. and Sabolinski, M. (2000). The effect of a tissue
engineered bilayered living skin analog, over meshed split-thickness
autografts on the healing of excised burn wounds. Burns, 26(7), 609-619.
Webb, A., Li, A. and Kaur, P. (2004). Location and phenotype of human adult
keratinocyte stem cells of the skin. Differentiation, 72(8), 387-395.
-
152
Whang, K., Thomas, C. H., Healy, K. E. and Nuber, G. (1995). A novel method to
fabricate bioabsorbable scaffolds. Polymer, 36(4), 837-842.
Wintermantel, E., Mayer, J., Blum, J., Eckert, K. L., Lüscher, P. and Mathey, M.
(1996). Tissue engineering scaffolds using superstructures. Biomaterials,
17(2), 83-91.
Wong, T., McGrath, J. A. and Navsaria, H. (2007). The role of fibroblasts in tissue
engineering and regeneration. British Journal of Dermatology, 156(6), 1149-
1155.
Woo, K. M., Jun, J.-H., Chen, V. J., Seo, J., Baek, J.-H., Ryoo, H.-M., et al. (2007).
Nano-fibrous scaffolding promotes osteoblast differentiation and
biomineralization. Biomaterials, 28(2), 335-343.
Wood, F. M., Kolybaba, M. L. and Allen, P. (2006). The use of cultured epithelial
autograft in the treatment of major burn injuries: A critical review of the
literature. Burns, 32(4), 395-401.
Wood, F. M., Stoner, M. L., Fowler, B. V. and Fear, M. W. (2007). The use of a
non-cultured autologous cell suspension and Integra® dermal regeneration
template to repair full-thickness skin wounds in a porcine model: A one-step
process. Burns, 33(6), 693-700.
Wozniak, M. A., Modzelewska, K., Kwong, L. and Keely, P. J. (2004). Focal
adhesion regulation of cell behavior. Biochimica et Biophysica Acta (BBA) -
Molecular Cell Research, 1692(2–3), 103-119.
Xiaoqiang, L., Yan, S., Rui, C., Chuanglong, H., Hongsheng, W. and Xiumei, M.
(2009). Fabrication and properties of core-shell structure P(LLA-CL)
nanofibers by coaxial electrospinning. Journal of Applied Polymer Science,
111(3), 1564-1570. doi: 10.1002/app.29056
Xie, J., Li, X. and Xia, Y. (2008). Putting electrospun nanofibers to work for
biomedical research. Macromolecular Rapid Communications, 29(22), 1775-
1792.
Xu, C. Y., Inai, R., Kotaki, M. and Ramakrishna, S. (2004). Aligned biodegradable
nanofibrous structure: a potential scaffold for blood vessel engineering.
Biomaterials, 25(5), 877-886.
Xu, J., Jiao, Y., Shao, X. and Zhou, C. (2011). Controlled dual release of
hydrophobic and hydrophilic drugs from electrospun poly(l-lactic acid) fiber
-
153
mats loaded with chitosan microspheres. Materials Letters, 65(17–18), 2800-
2803.
Xu, X., Chen, X., Ma, P., Wang, X. and Jing, X. (2008). The release behavior of
doxorubicin hydrochloride from medicated fibers prepared by emulsion-
electrospinning. European Journal of Pharmaceutics and Biopharmaceutics,
70(1), 165-170.
Xu, X., Yang, L., Xu, X., Wang, X., Chen, X., Liang, Q., et al. (2005). Ultrafine
medicated fibers electrospun from W/O emulsions. Journal of Controlled
Release, 108(1), 33-42.
Yan, S., Xiaoqiang, L., Lianjiang, T., Chen, H. and Xiumei, M. (2009). Poly(l-
lactide-co-ɛ-caprolactone) electrospun nanofibers for encapsulating and
sustained releasing proteins. Polymer, 50(17), 4212-4219.
Yan, S., Xiaoqiang, L., Shuiping, L., Xiumei, M. and Ramakrishna, S. (2009).
Controlled release of dual drugs from emulsion electrospun nanofibrous
mats. Colloids and Surfaces B: Biointerfaces, 73(2), 376-381.
Yang, X., Chen, X. and Wang, H. (2009). Acceleration of Osteogenic Differentiation
of Preosteoblastic Cells by Chitosan Containing Nanofibrous Scaffolds.
Biomacromolecules, 10(10), 2772-2778.
Yarin, A. L., Koombhongse, S. and Reneker, D. H. (2001). Bending instability in
electrospinning of nanofibers. Journal of Applied Physics, 89(5), 3018-3026.
Yoshimoto, H., Shin, Y. M., Terai, H. and Vacanti, J. P. (2003). A biodegradable
nanofiber scaffold by electrospinning and its potential for bone tissue
engineering. Biomaterials, 24(12), 2077-2082.
You, Y., Min, B.-M., Lee, S. J., Lee, T. S. and Park, W. H. (2005). In vitro
degradation behavior of electrospun polyglycolide, polylactide, and
poly(lactide-co-glycolide). Journal of Applied Polymer Science, 95(2), 193-
200.
Zahedi, P., Karami, Z., Rezaeian, I., Jafari, S.-H., Mahdaviani, P., Abdolghaffari, A.
H., et al. (2012). Preparation and performance evaluation of tetracycline
hydrochloride loaded wound dressing mats based on electrospun nanofibrous
poly(lactic acid)/poly(ϵ-caprolactone) blends. Journal of Applied Polymer
Science, 124(5), 4174-4183.
-
154
Zahedi, P., Rezaeian, I., Ranaei-Siadat, S.-O., Jafari, S.-H. and Supaphol, P. (2010).
A review on wound dressings with an emphasis on electrospun nanofibrous
polymeric bandages. Polymers for Advanced Technologies, 21(2), 77-95.
Zeng, J., Yang, L., Liang, Q., Zhang, X., Guan, H., Xu, X., et al. (2005). Influence of
the drug compatibility with polymer solution on the release kinetics of
electrospun fiber formulation. Journal of Controlled Release, 105(1-2), 43-
51.
Zhang, H., Zhao, Y., Han, F., Wang, M. and Yuan, X. (2011). Controlled release of
bovine serum albumin from electrospun fibrous membranes via an improved
emulsion-core technique. Journal of Controlled Release, 152, Supplement
1(0), e181-e182.
Zhang, Y., Lim, C., Ramakrishna, S. and Huang, Z.-M. (2005). Recent development
of polymer nanofibers for biomedical and biotechnological applications.
Journal of Materials Science: Materials in Medicine, 16(10), 933-946.
Zhang, Y. Z., Venugopal, J., Huang, Z. M., Lim, C. T. and Ramakrishna, S. (2006).
Crosslinking of the electrospun gelatin nanofibers. Polymer, 47(8), 2911-
2917.
Zhang, Y. Z., Wang, X., Feng, Y., Li, J., Lim, C. T. and Ramakrishna, S. (2006).
Coaxial Electrospinning of (Fluorescein Isothiocyanate-Conjugated Bovine
Serum Albumin)-Encapsulated Poly(ε-caprolactone) Nanofibers for
Sustained Release. Biomacromolecules, 7(4), 1049-1057.
Zhang, Z., Li, X., Wang, C., Wei, L., Liu, Y. and Shao, C. (2009). ZnO Hollow
Nanofibers: Fabrication from Facile Single Capillary Electrospinning and
Applications in Gas Sensors. The Journal of Physical Chemistry C, 113(45),
19397-19403.
Zhong, S. P., Zhang, Y. Z. and Lim, C. T. (2010). Tissue scaffolds for skin wound
healing and dermal reconstruction. Wiley Interdisciplinary Reviews:
Nanomedicine and Nanobiotechnology, 2(5), 510-525.
Zhou, Y., Yang, D., Chen, X., Xu, Q., Lu, F. and Nie, J. (2008). Electrospun Water-
Soluble Carboxyethyl Chitosan/Poly(vinyl alcohol) Nanofibrous Membrane
as Potential Wound Dressing for Skin Regeneration. Biomacromolecules,
9(1), 349-354.
-
155
Zhuang, X., Cheng, B., Kang, W. and Xu, X. (2010). Electrospun chitosan/gelatin
nanofibers containing silver nanoparticles. Carbohydrate Polymers, 82(2),
524-527.
Zong, X., Kim, K., Fang, D., Ran, S., Hsiao, B. S. and Chu, B. (2002). Structure and
process relationship of electrospun bioabsorbable nanofiber membranes.
Polymer, 43(16), 4403-4412.
Zong, X., Li, S., Chen, E., Garlick, B., Kim, K. S., Fang, D., et al. (2004). Prevention
of postsurgery-induced abdominal adhesions by electrospun bioabsorbable
nanofibrous poly(lactide-co-glycolide)-based membranes. Annals of Surgery,
240(5), 910-915.
Zong, X., Ran, S., Kim, K.-S., Fang, D., Hsiao, B. S. and Chu, B. (2003). Structure
and Morphology Changes during in Vitro Degradation of Electrospun
Poly(glycolide-co-lactide) Nanofiber Membrane. Biomacromolecules, 4(2),
416-423.
Zweifel, C. J., Contaldo, C., Köhler, C., Jandali, A., Künzi, W. and Giovanoli, P.
(2008). Initial experiences using non-cultured autologous keratinocyte
suspension for burn wound closure. Journal of Plastic, Reconstructive &
Aesthetic Surgery, 61(11), e1-e4.