reducing security costs using integration: by clearview
TRANSCRIPT
The IP Revolution in Security Technology:
How to Reduce Costs through
Convergence and Integration
Convergence
CCTV Access Control Public Address Intruder Fire
All systems on same industry standard platform
Easier to manage
Cheaper to manage
Systems “talk” to each other
Better Value
Convergence
CCTV Access Control Public Address Intruder Fire
IP address: 192.0.0.63 192.0.0.64 192.0.0.65 192.0.0.66 192.0.0.67
Convergence
CCTV Access Control Public Address Intruder Fire
“Network cloud”
IP address: 192.0.0.63 192.0.0.64 192.0.0.65 192.0.0.66 192.0.0.67
OutdoorAccess Point
SurveillanceCamera
Access Point
CCTV recorder
Transmission Options
Local Area Network (LAN)
Wired
Wireless
Broadband
3G/4G
Convergence
On-site Off site Remote monitoring centreControl room
PC/laptop/iPad
Mobile phone
PC/laptop/iPad
Mobile phone
Monitoring/management
Convergence
CCTV Access Control Public Address Intruder Fire
Monitoring/management
On-site Off site Remote monitoring centreControl room
PC/laptop/iPad
Mobile phone
PC/laptop/iPad
Mobile phone
CCTV Public Address
Existing “legacy” systems can be
Converted to IP
with
New Megapixel systems
IP processor
IP address: 192.0.0.63
IP address: 192.0.0.62
Access control
IP processor
IP address: 192.0.0.65 IP address: 192.0.0.62
Intruder & fire alarm
IP processor
IP address: 192.0.0.64 IP address: 192.0.0.65
Monitoring/management
On-site
Control room
PC/laptop/iPad
Mobile phone
PC/laptop/iPad
Mobile phone
Monitoring/management
Off-site
Remote monitoring
centre
Monitoring/management
Remote monitoring centre
Alarm receiving
Know which detectors have activated
CCTV monitoring
Two-way audio
Remote opening/unlocking
Monitoring/management
Remote & reactive Maintenance
Reduced Maintenance costs
Online Site Diagnostics –
communicate with the site
security systems to diagnose
problems and perform routine
service functions such as
checking signal signalling paths
and relays, reset a DVR and
allocate a static IP address.
Remotely re-set devices
Find potential problems before
they develop into faults
Monitoring/management
Remote Maintenance
Preventative maintenance
Save unnecessary site visits with remote security system programming. Add or change
users or isolate zones, perform simple diagnostics such as checking battery voltage and
zone resistance.
Continuos device monitoring - “Ping” each IP device at regular intervals to confirm that
it is online
Continuously monitor the current draw of every maglock at every door.
An increase in energy consumption is a likely indicator of imminent failure.
Continuously monitor temperature operation of key components
(e.g. DVR hard drives). A temperature increase is a likely indicator of imminent failure.
Check recording - is hard disc usage below expected levels?
More frequent preventative maintenance checks
Maintenance
Remote tools – automatically notifying service
centre
Daily Status Reports
Fault notification by email
Web Based Status View (from browser or iPhone)
Remote Analytics from Security Devices
Example IP system – ANPR
More sophisticated cameras, with IR lamp control,
give better performance in low light and improved
intelligence for difficult lighting conditions.
Megapixel cameras give higher resolution with
ability to provide detail at longer range
Analytics gives cameras greater intelligence to
understand what they are viewing.
Example IP system - ANPR
IP processor
IP address: 192.0.0.63
3G/4G
transmission
