reda electric submersible pump systems

361
Artificial Lift REDA Electric Submersible Pump Systems Technology Catalog

Upload: others

Post on 16-Oct-2021

82 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: REDA Electric Submersible Pump Systems

Artificial Lift

REDA Electric Submersible Pump Systems Technology Catalog

Page 2: REDA Electric Submersible Pump Systems

Schlumberger4646 West Sam Houston Parkway NorthHouston, Texas 77041

slb.com

Copyright © 2020 Schlumberger. All rights reserved.

No part of this book may be reproduced, stored in a retrieval system, or transcribed in any form or by any means, electronic or mechanical, including photocopying and recording, without the prior written permission of the publisher. While the information presented herein is believed to be accurate, it is provided “as is” without express or implied warranty. Specifications are current at the time of printing. Temperature ratings are for the internal tool components.

20-AL-747061

An asterisk (*) is used throughout this document to denote a mark of Schlumberger.

Other company, product, and service names are the properties of their respective owners.

Page 3: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog ■ Contents i

ContentsREDA* Electric Submersible Pump Systems Technology Catalog

Electric Submersible Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Pump, Intake, and Gas-Handling Device Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Bolt-on Pump Discharge Heads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Pump Intakes and Gas-Handling Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

A Series Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13AN550 Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13AN900 Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18AN1200 Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23AN1500 Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29A2700N Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

D Series Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41D460N Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41D800N Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47D1050N Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52D1150N Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58D1400N Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64DN1750 Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69DN1800 Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75DN2400 Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81D3500N Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87D5800N Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93

Pumps for the REDA Continuum* Unconventional Extended-Life ESP Stage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99RC1000 Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99RC2500 Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104RC4000 Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

G Series Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114GN1600 Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114GN2100 Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119GN3200 Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124GN4000 Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129GN5200 Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135G6200N Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141GN10000 Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147

H Series Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153HN13500 Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153H15500N Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158H22500N Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164H28000N Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168

J Series Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174J7000N Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174J8500N Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180J12000N Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181JN16000 Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187JN21000 Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .193

L Series Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .199L16000N Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .199L43000N Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .205

Page 4: REDA Electric Submersible Pump Systems

M Series Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .211M520 Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .211M675 Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .226

N Series Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .241N1050 Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .241N1400 Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .250

P Series Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .259P2500A Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .259

S Series Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .264SN2600 Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .264SN3600 Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .269S4000N Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .274S6000N Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .275S8000N Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .281S110000 Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .286

Cables for REDA* ESP Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287

REDA MAX* ESP Cable ETBE-R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .288

REDA MAX Cable ETBE-F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .289

REDA MAX Cable EE-R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .290

REDA MAX Lead Cable ELC-LPF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .291

REDA Lead Cable ELC-F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .292

REDA Lead Cable EHLTB-F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .293

REDA Lead Cable ELBE-R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .294

REDA Lead Cable HLTB-HT-F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .295

REDA Subsea Cable SESLTBE-R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .296

Protectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298

Protector Type Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .298

Elastomer Application Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .299

Protectors for the REDA Maximus* ESP System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .300325 Series Protector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .301400 Series Protector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .303540 Series Protector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .307

738 Series Protector 39

REDA Maximus ESP System Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310

375 Series Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .311

456 Series Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .313

562 Series Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .319

738 Series Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .329

REDA Maximus ESP System ProMotor* Integrated ESP Motor, Protector, and Sensor Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 333

Surface Electrical Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 349

Low-Voltage Variable Speed Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .349SpeedStar 519 SWD* 18-Pulse, Low-Voltage Sine Wave Variable Speed Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .349SpeedStar 2000 Plus* and SpeedStar SWD* Variable Speed Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .350VariStar* Variable Speed Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .352

Page 5: REDA Electric Submersible Pump Systems

Contents iii

Medium-Voltage Variable Speed Drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .352SpeedStar MVD* Medium-Voltage Variable Speed Drive for Indoor Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .353SpeedStar MVD* Drive for Outdoor Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .354

Fixed Speed Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .355FixStar* Fixed Speed Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .356

Motor Controller and Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .356Instruct* All-in-One Acquisition and Control Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .357Phoenix SoloConn* Data Acquisition and Control Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .358Phoenix ArConn* Rack-Mountable Data Acquisition and Control Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .359SCB3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .360

Page 6: REDA Electric Submersible Pump Systems

Pump SummaryPump Summary—338 to 562 Series

Series OD, in [mm] Pump Type GeometryCapacity Range, Recommended Limits60 Hz, bbl/d 50 Hz, m3/d

338 3.38 [85.85]

AN550 Radial Flow 400–700 53–93

AN900 Radial Flow 700–1,060 93–140

AN1200 Radial Flow 800–1,650 106–219

AN1500 Radial Flow 1,000–2,000 132–265

A2700N Mixed Flow 1,800–3,400 238–450

400† 4.00 [101.60]

D460N Radial Flow 200–650 26–86

D1050N Mixed Flow 300–1,650 40–219

D1150N Radial Flow 400–1,650 53–219

D1400N Radial Flow 960–1,700 127–225

DN1750 Mixed Flow 1,200–2,050 159–272

DN1800 Mixed Flow 1,200–2,400 159–318

D2400N Mixed Flow 1,500–3,200 199–424

D3500N Mixed Flow 1,600–4,500 212–596

D5800N Mixed Flow 4,400–7,000 583–927

RC1000 Mixed Flow 200–1350 27–180

RC2500 Mixed Flow 1000–3200 133–427

RC4000 Mixed Flow 3500–7000 467–933

540 5.13 [130.30]

GN1600 Radial Flow 1,000–2,150 132–285

GN2100 Radial Flow 1,650–2,700 219–358

GN3200 Radial Flow 2,200–4,100 291–543

GN4000 Mixed Flow 3,200–4,800 424–636

GN5200 Mixed Flow 3,900–6,600 517–874

G6200N Mixed Flow 4,500–8,000 596–1,060

GN10000 Mixed Flow 7,000–12,000 927–1,590

538 5.38 [136.65]

SN2600 Radial Flow 1,600–3,200 212–424

SN3600 Radial Flow 2,400–4,600 318–609

S4000N Mixed Flow 1000–6000 133–800

S6000N Mixed Flow 3,500–7,800 464–1,033

S8000N Mixed Flow 3,500–10,500 464–1,391

562 5.62 [142.75]

HN13500 Mixed Flow 5,000–18,000 662–2,385

H15500N Mixed Flow 11,000–20,000 1,457–2,650

H21500N Mixed Flow 17,500–24,000 2,319–3,180

H28000N Mixed Flow 28,000–36,000 3,710–4,770† All the 400 Series pumps are optionally available with a slimline 3.87-in- [98.3-mm-] OD housing.

REDA Electric Submersible Pump Systems Technology Catalog | ESP Components—Pumps 4

Page 7: REDA Electric Submersible Pump Systems

Pump Summary—675 to 1125 Series

Series OD, in [mm] Pump Type GeometryCapacity Range, Recommended Limits60 Hz, bbl/d 50 Hz, bbl/d

675 6.75 [171.45]

J7000N Mixed Flow 4,500–9,000 596–1,192

J12000N Mixed Flow 8,000–18,500 1,060–2,451

JN16000 Mixed Flow 12,800–19,500 1,696–2,584

JN21000 Mixed Flow 16,000–25,000 2,120–3,312

725 7.25 [184.15]L16000N Mixed Flow 11,000–20,000 1,497–2,650

L43000N Mixed Flow 36,000–54,000 4,770–7,155

862 8.62 [218.95]

M520A Mixed Flow 12,000–20,000 1,590–3,180

M520B Mixed Flow 12,000–23,000 1,590–3,047

M520C Mixed Flow 12,000–22,000 1,590–2,915

M675A Mixed Flow 19,000–32,000 2,517–4,306

M675B Mixed Flow 19,000–29,000 2,517–3,842

M675C Mixed Flow 19,000–28,000 2,517–3,710

950 9.50 [241.30]N1050A Mixed Flow 24,000–47,500 3,180–6,294

N1050B Mixed Flow 24,000–43,000 3,180–5,697

1000 10.00 [254.00]N1400A Mixed Flow 35,000–64,000 4,637–8,480

N1400B Mixed Flow 35,000–60,000 4,637–7,950

1125 11.25 [285.75] P2500A Mixed Flow 53,486–96,001 7,087–12,720

REDA Electric Submersible Pump Systems Technology Catalog | ESP Components—Pumps 5

Pump Summary

Page 8: REDA Electric Submersible Pump Systems

Pump, Intake, and Gas-Handling Device Nomenclature

Stage ConstructionDesignation DescriptionFL Floater design

C Compression, fixed-impeller design†

CR Compression ring, fixed-impeller design†

† Compression design greatly improves reliability and extends the operating range of the ESP (compared with floater design) by transferring the axial thrust developed by the stages to the high-load protector thrust bearing. The factory-shimmed compression feature provides all the benefits of the classic compression design without the need to precisely set the shafts upon the pump installation at the wellsite.

Pump ConfigurationsDesignation DescriptionUT Upper tandem pump with integral discharge head

CT Center tandem pump with no intake or discharge head; use as a single-section pump with bolt-on discharge and choice of bolt-on intake or gas separator, or use as a section of a tandem pump

LT Lower tandem pump with integral intake; use as a single-section pump with bolt-on discharge, or use as lower section of a tandem pump

Pump Shaft Radial Support OptionsDesignation DescriptionES Abrasion-resistant zirconium bearings

in head and base

ES-ZS Zirconium silicon carbide bearing pair in head and base

ES-SS Silicon carbide bearings in head and base

ES1 Abrasion-resistant zirconium carbide bearings in head, base, and middle of pump

ESX Abrasion-resistant bearings in head and base and X number distributed evenly through pump

ARZ Abrasion-resistant zirconium bearings distributed through pump

ARZ-SS Abrasion-resistant silicon carbide bearings distributed through pump

ARZ-ZS Abrasion-resistant zirconium silicon carbide bearing pairs distributed through pump

ARZ-TT Tungsten carbide bearings distributed through pump

FBH Full-bearing housing, ceramic bearings located at every stage

XN#### X-X-X or X####N X-X-X

Pump SeriesApproximate flow rate at best efficiency point (BEP), bbl/dStage ContructionPump ConfigurationPump Shaft Radial Support Options

Pump SeriesDesignation DescriptionA 338 Series

D 387/400 Series

S 538 Series

G 540 Series

H 562 Series

J 675 Series

L 725 Series

M 862 Series

N 950/1000 Series

P 1125 Series

Intake Types

Designation DescriptionIntake Standard intake.

RS Rotary separator

VGSA Vortex* gas separator

REDA Electric Submersible Pump Systems Technology Catalog | ESP Components—Pumps 6

Page 9: REDA Electric Submersible Pump Systems

338 SeriesPart Number Description Length, ft [m] Weight, lbm [kg]493015 23⁄8-in [60.33-mm] OD 8rd EUE—carbon steel 0.5 [0.15] 6 [2.7]

492223 23⁄8-in [60.33-mm] OD 8rd EUE—Redalloy* alloy 0.5 [0.15] 4 [1.8]

400 SeriesPart Number Description Length, ft [m] Weight, lbm [kg]243485 23⁄8-in [60.33-mm] OD 8rd EUE—carbon steel 0.6 [0.18] 10 [4.5]

364240 23⁄8-in [60.33-mm] OD 8rd EUE—Redalloy alloy 0.8 [0.24] 10 [4.5]

513/538 SeriesPart Number Description Length, ft [m] Weight, lbm [kg]194381 31⁄2-in [88.90-mm] OD 8rd EUE—carbon steel 0.8 [0.24] 22 [10.0]

492231 31⁄2-in [88.90-mm] OD 8rd EUE—Redalloy alloy 0.8 [0.24] 21 [10.0]

562 SeriesPart Number Description Length, ft [m] Weight, lbm [kg]274795 31⁄2-in [88.90-mm] OD 8rd EUE—carbon steel 0.8 [0.24] 25 [11.3]

1048339 31⁄2-in [88.90-mm] OD 8rd EUE—Redalloy alloy 0.8 [0.24] 25 [11.3]

675 SeriesPart Number Description Length, ft [m] Weight, lbm [kg]1006261 51⁄2-in [139.70-mm] OD 8rd LTC—carbon steel 0.8 [0.24] 30 [13.6]

997353 51⁄2-in [139.70-mm] OD 8rd LTC—Redalloy alloy 0.8 [0.24] 33 [15.0]

725 SeriesPart Number Description Length, ft [m] Weight, lbm [kg]1311125 51⁄2-in [139.70-mm] OD 8rd LTC—carbon steel 0.8 [0.24] 45 [20.4]

Bolt-on Pump Discharge Heads

REDA Electric Submersible Pump Systems Technology Catalog | ESP Components—Pumps 7

Page 10: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices 8

Pump Intakes and Gas-Handling Devices338 Series Bolt-On Intake

Description Length, ft [m]

Weight, lbm [kg]

Carbon Steel Part Number

Redalloy* High-Nickel Alloy Part Number

Standard intake, 338/375 0.8 [0.2] 20 [9.1] 307157 492249ARZ abrasion-resistant intake, 338/375 0.8 [0.2] 20 [9.1] 1146372 1129543

338 Series Rotary Gas Separator ARS

Description Length, ft [m]

Weight, lbm [kg]

Carbon Steel Part Number

Redalloy Alloy Part Number

ARS, 338/375 2.2 [0.7] 42 [19.1] tba† 1133636ARS, high-strength shaft, 338/375 2.2 [0.7] 42 [19.1] tba 1160027† To be assigned

387 Series Bolt-On Intake

Description Length, ft [m]

Weight, lbm [kg]

Carbon Steel Part Number

Redalloy Alloy Part Number

Intake: ARZ, standard trim, factory shimmed 1.0 [0.3] 28 [12.7] 100189479 tba†

Intake: ARZ, standard trim, high-strength shaft, factory shimmed 1.0 [0.3] 28 [12.7] 100189481 tba

Intake: ARZ, Monel® trim, high-strength shaft, factory shimmed 1.0 [0.3] 28 [12.7] tba 100189476

† To be assigned

387 Series Rotary Gas Separator CRS-ES

Description Length, ft [m]

Weight, lbm [kg]

Carbon Steel Part Number

Redalloy Alloy Part Number

CRS-ES, factory shimmed 2.0 [0.6] 65 [29.5] tba† 100205677CRS-ES, high-strength shaft, factory shimmed 2.0 [0.6] 65 [29.5] tba 100205633† To be assigned

387 Series Vortex* Gas Separator VGSA D20-60 (2,000- to 6,000-bbl/d Capacity)

Description Length, ft [m]

Weight, lbm [kg]

Carbon Steel Part Number

Redalloy Alloy Part Number

VGSA D20-60, ES-SS, high-strength shaft, factory shimmed 3.3 [1.0] 145 [65.9] tba† 100202669

VGSA D20-60, ES, high-strength shaft, factory shimmed 3.3 [1.0] 145 [65.9] tba 100204710† To be assigned

Page 11: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices 9

Pump Intakes and Gas-Handling Devices400 Series Bolt-On Intake

Description Length, ft [m]

Weight, lbm [kg]

Carbon Steel Part Number

Redalloy Alloy Part Number

Intake: ARZ, carbon steel, 400/400 1.0 [0.3] 28 [12.7] 1145382 1129527Intake: ARZ ZS, 400/400 1.0 [0.3] 28 [12.7] 1304567 100050260Intake: ARZ, high-strength shaft, 400/400 1.0 [0.3] 28 [12.7] 1230838 1140029Intake: ARZ ZS, high-strength shaft, 400/400 1.0 [0.3] 28 [12.7] tba† 1275536Intake: ARZ, 400/540 1.0 [0.3] 28 [12.7] tba 1259092Intake: ARZ ZS, 400/540 1.0 [0.3] 28 [12.7] tba 1313832Intake: ARZ, high-strength shaft, 400/540 1.0 [0.3] 28 [12.7] 100045111 1296128Intake: ARZ, 400/400, factory shimmed 1.0 [0.3] 28 [12.7] 100483189 tbaIntake: ARZ ZS, high-strength shaft, 400/400, factory shimmed 1.0 [0.3] 28 [12.7] tba 100483195

† To be assigned

400 Series Rotary Gas Separator DRS-ES

Description Length, ft [m]

Weight, lbm [kg]

Carbon Steel Part Number

Redalloy Alloy Part Number

DRS-ES, 400/375 2.6 [0.8] 70 [31.8] tba† 1129998DRS-ES, high-strength shaft, 400/400 2.6 [0.8] 70 [31.8] tba 1241272DRS-ES type, 400/400 2.6 [0.8] 70 [31.8] tba 1160043DRS-ES, 400/400, factory shimmed 2.6 [0.8] 70 [31.8] tba 100483765† To be assigned

400 Series Vortex Gas Separator VGSA D20-60 (2,000- to 6,000-bbl/d Capacity)

Description Length, ft [m]

Weight, lbm [kg]

Carbon Steel Part Number

Redalloy Alloy Part Number

VGSA D20-60, ES, high-strength shaft 3.2 [1.0] 145 [65.9] tba† 2003133VGSA D20-60, ES-ZS, high-strength shaft 3.2 [1.0] 145 [65.9] tba 2007915VGSA D20-60, ES-SS, high-strength shaft 3.2 [1.0] 145 [65.9] tba 100103337VGSA D20-60, ES, high-strength shaft, factory shimmed 3.2 [1.0] 145 [65.9] tba 100204710VGSA D20-60, ES-ZS, high-strength shaft, factory shimmed 3.2 [1.0] 145 [65.9] tba 100439733VGSA D20-60, ES-SS, high-strength shaft, factory shimmed 3.2 [1.0] 145 [65.9] tba 100202669† To be assigned

540 and 538 Series Bolt-On Intake

Description Length, ft [m]

Weight, lbm [kg]

Carbon Steel Part Number

Redalloy Alloy Part Number

Intake: ARZ, abrasion resistant 1.2 [0.4] 50 [22.7] 1145408 1129519Intake: ARZ, high-strength shaft 1.2 [0.4] 50 [22.7] 1242320 1156942Intake: ARZ ZS 1.2 [0.4] 50 [22.7] tba† 1346204Intake: ARZ ZS, high-strength shaft 1.2 [0.4] 50 [22.7] 1297829 tbaIntake: ARZ SS 1.2 [0.4] 50 [22.7] tba 1334770Intake: ARZ SS, high-strength shaft 1.2 [0.4] 50 [22.7] tba 2003387Intake: ARZ, factory shimmed 1.2 [0.4] 50 [22.7] 100191069 tbaIntake: ARZ, high-strength shaft, factory shimmed 1.2 [0.4] 50 [22.7] 100191144 100191146† To be assigned

Page 12: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices 10

Pump Intakes and Gas-Handling Devices538/540 Series Vortex Gas Separator VGSA S70-150 (7,000- to 15,000-bbl/d Capacity)

Description Length, ft [m]

Weight, lbm [kg]

Carbon Steel Part Number

Redalloy Alloy Part Number

VGSA S70-150, ES, high-strength shaft 3.4 [1.0] 160 [72.7] tba 1293885VGSA S70-150, ES-SS, high-strength shaft 3.4 [1.0] 160 [72.7] tba 2003763VGSA S70-150, ES-ZS, high-strength shaft 3.4 [1.0] 160 [72.7] tba 2006260VGSA S70-150, ES, high-strength shaft, factory shimmed 3.4 [1.0] 160 [72.7] tba 100204881VGSA S70-150, ES-ZS, high-strength shaft, factor shimmed 3.4 [1.0] 160 [72.7] tba 100204896VGSA S70-150, ES-SS, high-strength shaft, factory shimmed 3.4 [1.0] 160 [72.7] tba 100204898† To be assigned

562/540 Series Bolt-On Intake

Description Length, ft [m]

Weight, lbm [kg]

Carbon Steel Part Number

Redalloy Alloy Part Number

Standard intake: ARZ, high-strength shaft 0.7 [0.2] 47 [21.4] 1145424 1108042Standard intake: ARZ ZS, high-strength shaft 0.7 [0.2] 47 [21.4] tba† 1290758Standard intake: ARZ SS, high-strength shaft 0.7 [0.2] 47 [21.4] tba 2005181† To be assigned

675 Series Bolt-On Intake

Description Length, ft [m]

Weight, lbm [kg]

Carbon Steel Part Number

Redalloy Alloy Part Number

Standard intake: ARZ ZS, high-strength shaft , 675/540 1.1 [0.3] 47 [21.4] tba† 1308832Standard intake: ARZ, 675/738 1.1 [0.3] 47 [21.4] 1145440 1129501Standard intake: ARZ ZS, high-strength shaft , 675/738 1.1 [0.3] 47 [21.4] tba 1265503Gas separator: GS, 675/738 6.0 [1.8] 250 [113.6] 662213 tba† To be assigned

400 Series AGH* Advanced Gas-Handling Device D5-21 (500- to 2,100-bbl/d Capacity)

Description Length, ft [m]

Weight, lbm [kg]

Carbon Steel Part Number

Redalloy Alloy Part Number

AGH device D5-21, FL-CT ES, high-strength shaft 6.3 [1.9] 135 [61.4] 1236686 1251941AGH device D5-21, FL-CT ARZ, high-strength shaft 6.3 [1.9] 135 [61.4] 1252279 1251925AGH device D5-21, CR-CT ES, high-strength shaft 6.3 [1.9] 135 [61.4] 1237890 1251743AGH device D5-21, CR-CT ARZ, high-strength shaft 6.3 [1.9] 135 [61.4] 1252444 1251453

Page 13: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices 11

Pump Intakes and Gas-Handling Devices400 Series AGH Advanced Gas-Handling Device D20-60 (2,000- to 6,000-bbl/d Capacity)

Description Length, ft [m]

Weight, lbm [kg]

Carbon Steel Part Number

Redalloy Alloy Part Number

AGH device D20-60, C-CT ES, high-strength shaft 6.3 [1.9] 135 [61.4] 1345859 tba†

AGH device D20-60, C-LT ES, high-strength shaft 6.3 [1.9] 135 [61.4] 2000095 tbaAGH device D20-60, C-LT ES-ZS, high-strength shaft 6.3 [1.9] 135 [61.4] tba 2005146† To be assigned

540 Series AGH Advanced Gas-Handling Device G20-40 (2,000- to 4,000-bbl/d Capacity)

Description Length, ft [m]

Weight, lbm [kg]

Carbon Steel Part Number

Redalloy Alloy Part Number

AGH device G20-40, FL-CT ES, high-strength shaft 6.3 [1.9] 272 [123.6] 1295682 1295708AGH device G20-40, FL-CT ARZ, high-strength shaft 6.3 [1.9] 272 [123.6] 1294115 1295120AGH device G20-40, CR-CT ES, high-strength shaft 6.3 [1.9] 272 [123.6] 1295955 1295997AGH device G20-40, CR-CT ES-ZS, high-strength shaft 6.3 [1.9] 272 [123.6] 2004363 tba†

AGH device G20-40, CR-CT ARZ, high-strength shaft 6.3 [1.9] 272 [123.6] 1295930 1295971AGH device G20-40, CR-CT ARZ ZS, high-strength shaft 6.3 [1.9] 272 [123.6] 1335421 1340025AGH device G20-40, CR-CT ARZ SS, high-strength shaft 6.3 [1.9] 272 [123.6] tba 2007919† To be assigned

538 Series AGH Advanced Gas-Handling Device S70-100 (7,000- to 10,000-bbl/d Capacity)

Description Length, ft [m]

Weight, lbm [kg]

Carbon Steel Part Number

Redalloy Alloy Part Number

AGH device S70-100, FL-CT ES, high-strength shaft 6.3 [1.9] 284 [129.1] 1246008 1254614AGH device S70-100, FL-CT ARZ, high-strength shaft 6.3 [1.9] 284 [129.1] 1254580 1254598AGH device S70-100, CR-CT ES, high-strength shaft 6.3 [1.9] 284 [129.1] 1254622 1254606AGH device S70-100, CR-CT ARZ, high-strength shaft 6.3 [1.9] 284 [129.1] 1254564 1254572

Page 14: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices 12

Pump Intakes and Gas-Handling Devices562 Series AGH Advanced Gas-Handling Device H100-250 (10,000- to 25,000-bbl/d Capacity)

Description Length, ft [m]

Weight, lbm [kg]

Carbon Steel Part Number

Redalloy Alloy Part Number

AGH device H100-250, C-LT, 562/540 5.2 [1.6] 263 [119.5] 2010121 tba†

AGH device H100-250, C-LT-ES, modified shaft, 562/540 5.2 [1.6] 263 [119.5] 2010124 2010126AGH device H100-250, C-LT-ES, 562/540 5.2 [1.6] 263 [119.5] tba 2010111AGH device H100-250, C-LT ARZ SS, 562/540 5.2 [1.6] 263 [119.5] 2010100 2010110AGH device H100-250, C-LT ARZ SS, modified shaft, 562/540 5.2 [1.6] 263 [119.5] 2010128 2010127AGH device H100-250, C-LT-ES, 675/540 5.2 [1.6] 263 [119.5] 2010120 2010112AGH device H100-250, C-LT ARZ SS, 675/540 5.2 [1.6] 263 [119.5] 2010101 2010105AGH device H100-250, C-LT-ES, 725/540 5.2 [1.6] 263 [119.5] 2010119 2010113AGH device H100-250, C-LT ARZ SS, 725/540 5.2 [1.6] 263 [119.5] 2010102 2010106AGH device H100-250, C-LT-ES, 862/540 5.2 [1.6] 263 [119.5] 2010118 2010114AGH device H100-250, C-LT ARZ SS, 862/540 5.2 [1.6] 263 [119.5] 2010103 2010107† To be assigned

400 Series MGH* Multiphase Gas-Handling System D8-42 (800- to 4,200-bbl/d Capacity)

Description Length, ft [m]

Weight, lbm [kg]

Carbon Steel Part Number

Redalloy Alloy Part Number

MGH system D8-42, CR-CT 6.9 [2.1] 160 [72.7] 100065824 tba†

MGH system D8-42, CR-LT 6.9 [2.1] 160 [72.7] 100109719 tba† To be assigned

538/540 Series MGH Multiphase Gas-Handling System S50-90 (5,000- to 9,000-bbl/d Capacity)

Description Length, ft [m]

Weight, lbm [kg]

Carbon Steel Part Number

Redalloy Alloy Part Number

MGH system S50-90 6.3 [1.9] 290 [131.8] 2004352 100090034

Page 15: REDA Electric Submersible Pump Systems

338 Series, Min. Casing Size 4½-in [114.3-mm] ODES Carbon Steel ARZ Carbon Steel

Housing Length, ft [m] Weight, lbm [kg] Max. Stages FL-CT-ES Part Number Max. Stages FL-CT-ARZ Part Number10 2.1 [0.64] 38 [17.3] 16 tba 13 1148261

20 3.5 [1.07] 63 [28.6] 35 tba 29 1148279

30 4.9 [1.49] 88 [40.0] 54 tba 45 1148287

40 6.3 [1.92] 113 [51.3a] 74 tba 62 1148295

50 7.7 [2.35] 138 [62.7] 93 Q883181 80 1148303

60 9.1 [2.78] 163 [74.0] 112 Q883199 96 1148311

70 10.5 [3.20] 188 [85.4] 132 Q883207 112 1148329

80 11.9 [3.63] 213 [96.7] 151 C883215 130 1148337

90 13.3 [4.06] 238 [108.1] 170 Q883223 146 1148345

100 14.7 [4.48] 263 [119.4] 190 Q883231 164 1148352† To be assigned

AN550 Pump, 338 Series, Tandem CombinationsTandem Housing Sections Number

Pump Housing Number of Stages 50 60 70 80 90 100

110 205 1

120 224 2

130 244 1 1

140 264 2

150 283 1 1

160 302 2

170 321 1 1

180 340† 2

190 360† 1 1

200 380† 2

210 396† 3

220 415† 2 1

230 434† 2 1

240 453† 3

250 472† 2 1

260 492† 2 1

270 510† 3

280 530† 2 1

290 550† 1 2

300 570† 3

310 585† 1 3

320 604† 4 Note: Stage counts are for FL-CT-ES pumps† Requires use of high-load bearing in protector

AN550 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—A Series Pumps 13

Page 16: REDA Electric Submersible Pump Systems

0100

200300

400500

600700

800900

5 10 15 20

0.50

1.00

1.50

2.00

Head(ft)

Power

(hp)

40302010

Capacity (bbl/d)

E�ciency(%

)

Optimum

operating range 400–700 bbl/d

Shaft brake-power lim

it Standard

94 hpN

ominal housing diam

eter 3.38 in.

High strength

150 hp

Shaft diameter 0.625 in.

Housing burst-pressure limit

Standard N

ot applicableShaft cross-sectional area

0.307 in. 2

Buttress 6,000 psi

Min. casing size

4.500 in.

Welded

6,000 psi

REDA* ESP AN

550 Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

Operating range

E�ciency

Head

Power

00

0

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—A Series Pumps 14

AN550 Pump

Page 17: REDA Electric Submersible Pump Systems

AN550 Pump

5

10

15

20

25

0 100 200 300 400 500 600 700 800 900 1,000 1,100

0.05

0.10

0.15

0.20

Capacity, (bbl/d)

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA* Pump AN550 Performance CurveCurve computed for one stage in fluid of 1.00 sg.

Head(ft)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—A Series Pumps 15

Page 18: REDA Electric Submersible Pump Systems

AN550 Pump

025

5075

100125

1.00

2.00

3.00

4.00

0.50

1.00

1.50

2.00

Head(m

)

Power

(hp)

40302010

Capacity (m3⁄d)

E�ciency(%

)

Optimum

operating range 53–93 m

3⁄d Shaft brake-pow

er limit

Standard 78 hp

Nom

inal housing diameter

8.59 cm

High strength

125 hp

Shaft diameter 1.59 cm

Housing burst-pressure lim

it Standard

Not applicable

Shaft cross-sectional area 1.98 cm

2

Buttress 41,370 kPa

Min. casing size

11.43 cm

W

elded 41,370 kPa

REDA* ESP AN

550 Pump Perform

ance Curve 50 H

z, 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

Operating range

E�ciency

Head

Power

00

0

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—A Series Pumps 16

Page 19: REDA Electric Submersible Pump Systems

AN550 Pump

1.00

2.00

3.00

4.00

5.00

6.00

7.00

8.00

0 25 50 75 100 125 150 175

0.05

0.10

0.15

0.20

Power(hp)

Head(m)

Capacity (m3/d)

REDA* Pump AN550 Performance CurveCurve computed for one stage in fluid of 1.00 sg.

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—A Series Pumps 17

Page 20: REDA Electric Submersible Pump Systems

338 Series, Min. Casing Size 4½-in [114.3-mm] ODES Carbon Steel ARZ Carbon Steel

Housing Length, ft [m] Weight, lbm [kg] Max. Stages FL-CT-ES Max. Stages FL-CT-ARZ Part Number10 2.1 [0.64] 38 [17.3] 16 tba 13 1148162

20 3.5 [1.07] 63 [28.6] 35 tba 29 1148170

30 4.9 [1.49] 88 [40.0] 54 tba 45 1148188

40 6.3 [1.92] 113 [51.3] 74 tba 62 1148196

50 7.7 [2.35] 138 [62.7] 93 tba 80 1148204

60 9.1 [2.78] 163 [74.0] 112 C883298 96 1148212

70 10.5 [3.20] 188 [85.4] 132 Q883306 112 1148220

80 11.9 [3.63] 213 [96.7] 151 100022487 130 1148238

90 13.3 [4.06] 238 [108.1] 170 tba 146 1148246

100 14.7 [4.48] 263 [119.4] 190 Q883330 164 1148253† To be assigned

AN900 Pump

AN900 Pump, 338 Series, Tandem CombinationsTandem Housing Sections Number

Pump Housing Number of Stages 50 60 70 80 90 100110 205 1 1

120 224 2

130 244 1 1

140 264 2

150 283 1 1

160 302 2

170 321 1 1

180 340† 2

190 359† 1 1

200 378† 2

210 396† 3

220 415† 2 1

230 434† 2 1

240 453† 3

250 472† 2 1

260 491† 2 1

270 510† 3

280 529† 2 1

290 548† 1 2

300 567† 3

310 585† 1 3

320 604† 4

330 623† 3 1 Note: Stage counts are for FL-CT-ES pumps† Requires use of high-load bearing in protector

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—A Series Pumps 18

Page 21: REDA Electric Submersible Pump Systems

AN900 Pump

0250

500750

1,0001,250

1,500

5 10 15 20 25

Head(ft)

0.25

0.50

0.75

1.00

1.25

Power

(hp)

5040302010

Capacity (bbl/d)

E�ciency(%

)

Optimum

operating range 700–1,060 bbl/d

Shaft brake-power lim

it Standard

94 hpN

ominal housing diam

eter 3.38 in.

High strength

150 hp

Shaft diameter 0.625 in.

Housing burst-pressure limit

Standard N

ot applicableShaft cross-sectional area

0.307 in. 2

Buttress 6,000 psi

Min. casing size

4.500 in.

Welded

6,000 psi

REDA* ESP AN

900 Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

Operating range

E�ciency

HeadPower

00

0

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—A Series Pumps 19

Page 22: REDA Electric Submersible Pump Systems

AN900 Pump

5

10

15

20

25

0 250 500 750 1,000 1,250 1,500 1,750

0.05

0.10

0.15

0.20

Capacity (bbl/d)

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA* Pump AN900 Performance CurveCurve computed for one stage in fluid of 1.00 sg.

Head(ft)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—A Series Pumps 20

Page 23: REDA Electric Submersible Pump Systems

AN900 Pump

025

5075

100125

150175

200

1.00

2.00

3.00

4.00

5.00

0.25

0.50

0.75

1.00

1.25

Head(m

)

Power

(hp)

5040302010

Capacity (m3⁄d)

E�ciency(%

)

Optimum

operating range 93–140 m

3⁄d Shaft brake-pow

er limit

Standard 78 hp

Nom

inal housing diameter

8.59 cm

High strength

125 hp

Shaft diameter 1.59 cm

Housing burst-pressure lim

it Standard

Not applicable

Shaft cross-sectional area 1.98 cm

2

Buttress 41,370 kPa

Min. casing size

11.43 cm

W

elded 41,370 kPa

REDA* ESP AN

900 Pump Perform

ance Curve 50 H

z, 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

Operating range

E�ciency

Head

Power

00

0

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—A Series Pumps 21

Page 24: REDA Electric Submersible Pump Systems

AN900 Pump

5

10

15

20

25

0 250 500 750 1,000 1,250 1,500 1,750

0.05

0.10

0.15

0.20

Capacity (bbl/d)

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA* Pump AN900 Performance CurveCurve computed for one stage in fluid of 1.00 sg.

Head(ft)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—A Series Pumps 22

Page 25: REDA Electric Submersible Pump Systems

338 Series, Min. Casing Size 4½-in [114.3-mm] OD

ES Carbon Steel ARZ Carbon Steel

Housing Length, ft [m] Weight, lbm [kg] Max. Stages FL-CT-ES Part Number Max. Stages FL-CT-ARZ Part Number

10 2.1 [0.64] 38 [17.3] 13 tba† 11 1147388

20 3.5 [1.07] 63 [28.6] 29 tba 23 1147396

30 4.9 [1.49] 88 [40.0] 45 tba 37 1147404

40 6.3 [1.92] 113 [51.3] 61 tba 50 1147412

50 7.7 [2.35] 138 [62.7] 77 tba 66 1147420

60 9.1 [2.78] 163 [74.0] 93 tba 79 1147438

70 10.5 [3.20] 188 [85.4] 108 Q883405 92 1147446

80 11.9 [3.63] 213 [96.7] 124 Q883413 107 1147453

90 13.3 [4.06] 238 [108.1] 140 Q883421 120 1147461

100 14.7 [4.48] 263 [119.4] 156 tba 135 1147479† To be assigned

AN1200 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—A Series Pumps 23

Page 26: REDA Electric Submersible Pump Systems

AN1200 PumpAN1200 Pump, 338 Series, Tandem Combinations

Tandem Housing Sections NumberPump Housing Number of Stages 50 60 70 80 90 100110 170 1 1

120 186 2

130 201 1 1

140 216 2

150 232 1 1

160 248 2

170 264 1 1

180 280 2

190 296 1 1

200 312 2

210 324 3

220 340 2 1

230 356† 2 1

240 372† 3

250 388† 2 1

260 404† 2 1

270 420† 3

280 436† 2‡ 1‡

290 452† 1‡ 2‡

300 468† 3‡

310 480† 1‡ 3‡

320 496† 4‡

330 512† 3‡ 1‡

340 528† 3‡ 1‡

350 544† 1‡ 3‡

360 560† 4‡

370 576† 3‡ 1‡

380 592† 1‡ 3‡

390 608† 1‡ 3‡

400 624† 4‡

410 636† 2‡ 3‡

420 652† 1‡ 1‡ 3‡

Note: Stage counts are for FL-CT-ES pumps. Requires use of high-load bearing in protector ‡ Requires use of high-strength shaft in lowermost pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—A Series Pumps 24

Page 27: REDA Electric Submersible Pump Systems

0250

500750

1,0001,250

1,5001,750

2,000

Head(ft)

5 10 15 20 25

0.25

0.50

0.75

1.00

1.25

Power

(hp)

5040302010

Capacity (bbl/d)

E�ciency(%

)

Optimum

operating range 800–1,650 bbl/d

Shaft brake-power lim

it Standard

94 hpN

ominal housing diam

eter 3.38 in.

High strength

150 hp

Shaft diameter 0.625 in.

Housing burst-pressure limit

Standard N

ot applicableShaft cross-sectional area

0.307 in. 2

Buttress 6,000 psi

Min. casing size

4.500 in.

Welded

6,000 psi

REDA* ESP AN

1200 Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

Operating range

E�ciency

Head

Power

00

0

AN1200 Pump

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—A Series Pumps 25

Page 28: REDA Electric Submersible Pump Systems

5

10

15

20

25

0 250 500 750 1,000 1,250 1,500 1,750 2,000 2,250 2,500

0.05

0.10

0.15

0.20

0.25

0.30

0.35

Capacity (bbl/d)

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA* Pump AN1200 Performance CurveCurve computed for one stage in fluid of 1.00 sg.

Head(ft)

AN1200 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—A Series Pumps 26

Page 29: REDA Electric Submersible Pump Systems

025

5075

100125

150175

200225

250275

1.00

2.00

3.00

4.00

5.00

0.25

0.50

0.75

1.00

1.25

Head(m

)

Power

(hp)

5040302010

Capacity (m3⁄d)

E�ciency(%

)

Optimum

operating range 106–219 m

3⁄d Shaft brake-pow

er limit

Standard 78 hp

Nom

inal housing diameter

8.59 cm

High strength

125 hp

Shaft diameter 1.59 cm

Housing burst-pressure lim

it Standard

Not applicable

Shaft cross-sectional area 1.98 cm

2

Buttress 41,370 kPa

Min. casing size

11.43 cm

W

elded 41,370 kPa

REDA* ESP AN

1200 Pump Perform

ance Curve 50 H

z, 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

Operating range

E�ciency

Head

Power

00

0

AN1200 Pump

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—A Series Pumps 27

Page 30: REDA Electric Submersible Pump Systems

1.00

2.00

3.00

4.00

5.00

6.00

7.00

8.00

0 50 100 150 200 250 300 350 400

0.05

0.10

0.15

0.20

0.25

0.30

0.35

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

Capacity (m3/d)

Head(m)

REDA* Pump AN1200 Performance CurveCurve computed for one stage in fluid of 1.00 sg.

AN1200 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—A Series Pumps 28

Page 31: REDA Electric Submersible Pump Systems

338 Series, Min. Casing Size 4½-in [114.3-mm] ODES Carbon Steel ARZ Carbon Steel

Housing Length, ft [m] Weight, lbm [kg] Max. Stages FL-CT-ES Part Number Max. Stages FL-CT-ARZ Part Number10 2.1 [0.64] 38 [17.3] 10 tba 8 1147172

20 3.5 [1.07] 63 [28.6] 23 tba 19 1147180

30 4.9 [1.49] 88 [40.0] 35 tba 29 1147198

40 6.3 [1.92] 113 [51.3] 48 tba 40 1147206

50 7.7 [2.35] 138 [62.7] 60 tba 51 1147214

60 9.1 [2.78] 163 [74.0] 73 Q883603 62 1147222

70 10.5 [3.20] 188 [85.4] 85 Q883611 73 1147230

80 11.9 [3.63] 213 [96.7] 98 Q883629 84 1147248

90 13.3 [4.06] 238 [108.1] 110 Q883637 95 1147255

100 14.7 [4.48] 263 [119.4] 123 Q883645 106 1147263† To be assigned o be assigned

AN1500 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—A Series Pumps 29

Page 32: REDA Electric Submersible Pump Systems

AN1500 Pump, 338 Series, Tandem Combinations

Tandem Housing Sections NumberPump Housing Number of Stages 50 60 70 80 90 100110 133 1 1

120 146 2

130 158 1 1

140 170 2

150 183 1 1

160 196 2

170 208 1 1

180 220 2

190 233 1 1

200 246 2

210 255 3

220 268 2 1

230 280 2 1

240 294 3

250 306 2 1

260 319 2 1

270 330 3

280 343† 2 1

290 356† 1 2

300 369† 3

310 379† 1 3

320 392† 4‡

330 404† 3‡ 1‡

340 417† 3‡ 1‡

350 428† 1‡ 3‡

360 440† 4‡

370 453† 3‡ 1‡

380 467† 1‡ 3‡

390 479† 1‡ 3‡

400 492† 4‡

410 502† 4‡ 1‡

420 514† 3‡ 2‡

430 526† 2‡ 3‡

440 538† 1‡ 4‡

450 550† 5‡

460 563† 4‡ 1‡

470 576† 3‡ 2‡

480 589† 2‡ 3‡

490 602† 1‡ 4‡

500 615† 5‡

Note: Stage counts are for FL-CT-ES pumps † Requires use of high-load bearing in protector ‡ Requires use of high-strength shaft in lowermost pump

AN1500 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—A Series Pumps 30

Page 33: REDA Electric Submersible Pump Systems

0250

500750

1,0001,250

1,5001,750

2,0002,250

2,5002,750

5 10 15 20

0.50

1.00

1.50

2.00

Head(ft)

Power

(hp)

403020100

Capacity (bbl/d)

E�ciency(%

)

Optimum

operating range 1,000–2,000 bbl/d

Shaft brake-power lim

it Standard

125 hpN

ominal housing diam

eter 3.38 in.

High strength

200 hp

Shaft diameter 0.688 in.

Housing burst-pressure limit

Standard N

ot applicableShaft cross-sectional area

0.371 in. 2

Buttress 6,000 psi

Min. casing size

4.500 in.

Welded

6,000 psi

REDA* ESP AN

1500 Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

Operating range

E�ciency

Head

Power

00

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

AN1500 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—A Series Pumps 31

Page 34: REDA Electric Submersible Pump Systems

AN1500 Pump

2.50

5.00

7.50

10.00

12.50

15.00

17.50

20.00

22.50

0 500 1,000 1,500 2,000 2,500 3,000 3,500

0.05

0.10

0.15

0.20

0.25

0.30

0.35

0.40

0.45

0.50

Capacity (bbl/d)

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA* Pump AN1500 Performance CurveCurve computed for one stage in fluid of 1.00 sg.

Head(ft)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—A Series Pumps 32

Page 35: REDA Electric Submersible Pump Systems

AN1500 Pump

050

100150

200250

300350

400

1.00

2.00

3.00

4.00

0.50

1.00

1.50

2.00

Head(m

)

Power

(hp)

40302010

Capacity (m3⁄d)

E�ciency(%

)

Optimum

operating range 132–265 m

3⁄d Shaft brake-pow

er limit

Standard 104 hp

Nom

inal housing diameter

8.59 cm

High strength

167 hp

Shaft diameter 1.75 cm

Housing burst-pressure lim

it Standard

Not applicable

Shaft cross-sectional area 2.39 cm

2

Buttress 41,370 kPa

Min. casing size

11.43 cm

W

elded 41,370 kPa

REDA*ESP AN

1500 Pump Perform

ance Curve 50 H

z, 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

Operating range

E�ciency Head

Power

00

0

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—A Series Pumps 33

Page 36: REDA Electric Submersible Pump Systems

AN1500 Pump

1.00

2.00

3.00

4.00

5.00

6.00

0 50 100 150 200 250 300 350 400 450 500 550

0.05

0.10

0.15

0.20

0.25

0.30

0.35

0.40

0.45

0.50

Capacity (m3/d)

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA* Pump AN1500 Performance CurveCurve computed for one stage in fluid of 1.00 sg.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—A Series Pumps 34

Page 37: REDA Electric Submersible Pump Systems

Artificial Lift

338 Series, Min. Casing Size 4½-in [114.3-mm] OD

ES Carbon Steel ARZ Carbon SteelHousing Length, ft [m] Weight, lbm [kg] Max. Stages FL-CT-ES Part Number Max. Stages CR-CT-ARZ Part Number10 2.1 [0.64] 38 [17.3] 4 100142518 4 100144727

20 3.5 [1.07] 63 [28.6] 10 100160591 10 100160184

30 4.9 [1.49] 88 [40.0] 15 100160605 15 100160183

40 6.3 [1.92] 113 [51.3] 20 100160606 21 100159837

50 7.7 [2.35] 138 [62.7] 26 100150209 26 100151494

60 9.1 [2.78] 163 [74.0] 31 100160608 31 100159833

70 10.5 [3.20] 188 [85.4] 37 100160609 37 100159826

80 11.9 [3.63] 213 [96.7] 42 100160610 42 100159721

90 13.3 [4.06] 238 [108.1] 48 100150210 48 100151513

100 14.7 [4.48] 263 [119.4] 53 100160611 53 100159718

110 16.1 [4.91] 288 [130.8] 59 100160613 59 100159710

120 17.5 [5.34] 313 [142.1] 64 100150211 64 100151536

130 18.9 [5.76] 338 [153.5] 70 100176477 70 100167674

140 20.3 [6.19] 363 [164.8] 75 100176480 75 100167678

150 21.7 [6.62] 388 [176.2] 81 100176481 81 100167679

338 Series, Min. Casing Size 4½-in [114.3-mm] OD

ES Carbon Steel ARZ Carbon SteelHousing Length, ft [m] Weight, lbm [kg] Max. Stages FL-LT-ES Part Number Max. Stages CR-LT-ARZ Part Number10 2.1 [0.64] 38 [17.3] 4 100146112 4 100145843

20 3.5 [1.07] 63 [28.6] 10 100155822 10 100158103

30 4.9 [1.49] 88 [40.0] 15 100155824 15 100158104

40 6.3 [1.92] 113 [51.3] 20 100155827 21 100158105

50 7.7 [2.35] 138 [62.7] 26 100151727 26 100158106

60 9.1 [2.78] 163 [74.0] 31 tba† 31 100158107

70 10.5 [3.20] 188 [85.4] 37 100156087 37 100158109

80 11.9 [3.63] 213 [96.7] 42 100156088 42 100158110

90 13.3 [4.06] 238 [108.1] 48 100151728 48 100158111

100 14.7 [4.48] 263 [119.4] 53 100156090 53 100158112

110 16.1 [4.91] 288 [130.8] 59 100156093 59 100158113

120 17.5 [5.34] 313 [142.1] 64 100151729 64 100158116

130 18.9 [5.76] 338 [153.5] 70 100177056 70 100173493

140 20.3 [6.19] 363 [164.8] 75 100177058 75 100173494

150 21.7 [6.62] 388 [176.2] 81 100177060 81 100173495† To be assigned

A2700N Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—A Series Pumps 35

Page 38: REDA Electric Submersible Pump Systems

A2700N Pump, 338 Series, Tandem Combinations

Tandem Housing Sections NumberPump Housing Number of Stages 80 90 100 110 120 130 140 150160 84† 2

170 90† 1 1

180 95† 1 1

190 101† 1 1

200 106† 2

210 112† 1 1

220 118† 2

230 123† 1 1

240 128† 2

250 134† 1 1

260 140† 2

270 145† 1 1

280 150† 2

290 156† 1 1

300 162† 2

310 165† 2 1

320 171† 1 2

330 177† 3

340 182† 2 1

350 187† 1 2

360 192† 3

370 198† 2 1

380 204† 1 2

390 210† 3

400 215† 2 1

410 220† 1 2

420 225† 3

430 231† 2 1

440 237† 1 2

450 243† 3

460 245† 1 3

470 251† 1 3

480 256† 4

490 262† 3‡ 1‡

500 267† 3‡ 1‡

510 274† 1‡ 3‡

520 280† 4‡

530 285† 3‡ 1‡

540 291† 3‡ 0‡ 1‡

550 296† 2‡ 1‡ 1‡

560 302†, § 2‡ 0‡ 2‡

570 307†, § 1‡ 1‡ 2‡

580 312† 2‡ 2‡

590 318†, § 1‡ 3‡

600 324†, § 4‡

Note: Stage counts are for FL-CT-ES pumps † Requires use of high-load bearing in protector for compression pumps ‡ Requires use of high-strength shaft in lowermost pump § Requires use of high-load bearing in protector for floater pumps

A2700N Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—A Series Pumps 36

Page 39: REDA Electric Submersible Pump Systems

A2700N Pump

0500

1,0001,500

2,0002,500

3,0003,500

4,000

5 10 15 20 25 30

0.50

1.00

1.50

2.00

2.50

3.00

Head(ft)

Power

(hp)

605040302010

Capacity ( bbl/d)

E�ciency(%

)

REDA* ESP A2700N

Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.Operating range

E�ciency

Head

Power

Optimum

operating range 1,800–3,400 bbl/d

Shaft brake-power lim

it Standard

125 hpN

ominal housing diam

eter 3.38 in.

High strength

200 hp

Shaft diameter 0.688 in.

Housing burst-pressure limit

Standard N

ot applicableShaft cross-sectional area

0.371 in. 2

Buttress 6,000 psi

Min. casing size

4.500 in.

Welded

6,000 psi

00

0

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—A Series Pumps 37

Page 40: REDA Electric Submersible Pump Systems

Artificial Lift

A2700N PumpREDA* Pump A2700N Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

30

25

20

15

10

5

Head(ft)

0.70

0.60

0.50

0.40

0.30

0.20

0.10

Power(hp)

0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000

Capacity (bbl/d)

70 Hz

65 Hz

60 Hz

55 Hz

50 Hz

70 Hz

65 Hz

60 Hz

55 Hz

50 Hz

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—A Series Pumps 38

Page 41: REDA Electric Submersible Pump Systems

A2700N Pump

050

100150

200250

300350

400450

500550

1.00

2.00

3.00

4.00

5.00

6.00

0.50

1.00

1.50

2.00

2.50

3.00

Head(m

)

Power

(hp)

605040302010

Capacity (m3⁄d)

E�ciency(%

)

Optimum

operating range 238–450 m

3⁄d Shaft brake-pow

er limit

Standard 104 hp

Nom

inal housing diameter

8.59 cm

High strength

167 hp

Shaft diameter 1.75 cm

Housing burst-pressure lim

it Standard

Not applicable

Shaft cross-sectional area 3.40 cm

2

Buttress 41,370 kPa

Min. casing size

11.43 cm

W

elded 41,370 kPa

REDA* ESP A2700N

Pump Perform

ance Curve 50 H

z, 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

Operating range

E�ciency

Head

Power

00

0

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—A Series Pumps 39

Page 42: REDA Electric Submersible Pump Systems

A2700N Pump

1.00

2.00

3.00

4.00

5.00

6.00

7.00

8.00

0 100 200 400 500 600 700 800

0.10

0.20

0.30

0.40

0.50

0.60

0.70

Capacity (m3/d)

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA* Pump A2700N Performance CurveCurve computed for one stage in fluid of 1.00 sg.

300

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—A Series Pumps 40

Page 43: REDA Electric Submersible Pump Systems

D460N Pump400 Series, Min. Casing Size 5½-in [139.7-mm] OD

Housing Length, ft [m] Weight, lbm [kg]ES Carbon Steel ARZ-ZZ Carbon Steel ARZ-SS Carbon Steel

Max. Stages CR-CT, FS Part Number

Max. Stages CR-CT, FS Part Number

Max. Stages CR-CT, FS Part Number

10 2.1 [0.64] 45 [20.4] 12 tba† 10 tba 10 tba

20 3.5 [1.07] 75 [34.1] 27 tba 24 tba 24 tba

30 4.9 [149] 105 [47.7] 43 tba 38 tba 38 tba

40 6.3 [1.92] 135 [61.3] 59 tba 51 tba 51 tba

50 7.7 [2.35] 166 [75.4] 74 tba 66 tba 66 tba

60 9.1 [2.78] 195 [88.5] 90 100739101 80 100739108 80 tba

70 10.5 [3.20] 225 [102.2] 105 100739100 94 100739107 94 tba

80 11.9 [3.63] 255 [115.8] 121 100496742 108 100497268 108 100497480

90 13.3 [4.06] 285 [129.4] 136 100496743 122 100497270 122 100497481

100 14.7 [4.48] 315 [143.0] 152 100496744 137 100497271 137 100497482

110 16.1 [4.91] 345 [156.6] 167 100496745 151 100497272 151 100497483

120 17.5 [5.34] 375 [170.3] 183 100496746 164 100497273 164 100497484† To be assigned.

387 Series, Min. Casing Size 5½-in [139.7-mm] OD

Housing Length, ft [m] Weight, lbm [kg]ES Carbon Steel ARZ-ZZ Carbon Steel ARZ-SS Carbon Steel

Max. Stages CR-CT, FS Part Number

Max. Stages CR-CT, FS Part Number

Max. Stages CR-CT, FS Part Number

10 2.1 [0.64] 45 [20.4] 12 tba† 10 tba 10 tba

20 3.5 [1.07] 75 [34.1] 27 tba 24 tba 24 tba

30 4.9 [149] 105 [47.7] 43 tba 38 tba 38 tba

40 6.3 [1.92] 135 [61.3] 59 tba 51 tba 51 tba

50 7.7 [2.35] 166 [75.4] 74 tba 66 tba 66 tba

60 9.1 [2.78] 195 [88.5] 90 100739103 80 100739105 80 tba

70 10.5 [3.20] 225 [102.2] 105 100739102 94 100739104 94 tba

80 11.9 [3.63] 255 [115.8] 121 100496742 108 100493278 108 100494468

90 13.3 [4.06] 285 [129.4] 136 100485158 122 100493582 122 100494469

100 14.7 [4.48] 315 [143.0] 152 100485162 137 100493585 137 100494470

110 16.1 [4.91] 345 [156.6] 167 100485166 151 100493587 151 100494471

120 17.5 [5.34] 375 [170.3] 183 100485196 164 100493590 164 100494472Note: This factory-shimmed pump type should always be installed with a factory-shimmed coupling. If this pump type is mated with other factory-shimmed equipment, no shimming is required during assembly. Conversely, if this pump type is mated with nonfactory-shimmed equipment, the field-shimming procedures must be followed.

† To be assigned.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 41

Page 44: REDA Electric Submersible Pump Systems

D460N Pump, 400 Series, Tandem Combinations

Tandem Housing Sections NumberPump Housing Number of Stages 60 70 80 90 100 110 120

130 195 1 1

140 210 2

150 226 1 1

160 242 2

170 257 1 1

180 272 2

190 288 1 1

200 304 2

210 319 1 1

220 334 2

230 350 1 1

240 366 2

D460N Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 42

Page 45: REDA Electric Submersible Pump Systems

D460N Pump

0100

200300

400500

600700

800

50%

40%

30%

20%

10%

0%

5040302010

1.25

1.00

0.75

0.50

0.25

Power

(hp)

Optimum

operating range 200–650 bbl/d

Norm

al housing diameter

4.00 in

Shaft diameter 0.625 in

Shaft cross sectional area 0.307 in

2

Minim

um casing size

5.5 in

Shaft brake horsepower lim

it Standard

116 hp

High strength 150 hp

Housing burst pressure limit

Standard 5,000 psi

Buttress

6,000 psi

Welded

6,000 psi

Capacity, bbl/d

Head(ft)

Operating range

E�ciency

Power

Head

REDA ESP systems

Pump Perform

ance Curve D460N 60 Hz / 3500 rpm

400 Series – 1 Stage(s) – sg 1.00

B.E.P.

H = 35.90P = 0.24E = 53.00

Q = 486

E�ciency(%

)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 43

Page 46: REDA Electric Submersible Pump Systems

D460N Pump

50

40

30

20

10

0 100 200 300 400 500 600 700 800 900 1,000

0.50

0.40

0.30

0.20

0.10

Capacity - bbl/d

REDA ESP systemsREDA Pump Performance Curve D460N 400 Series – 1 Stage(s)

Head(ft)

Fluid SpecificGravity 1.00

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 44

Page 47: REDA Electric Submersible Pump Systems

D460N Pump

100

2030

4050

6070

8090

100110

12.50

10.00

7.50

5.00

2.50

1.25

1.00

0.75

0.50

0.25

Optimum

operating range 26–86 m

3/dN

ormal housing diam

eter 10.16 cm

Shaft diameter 1.588 cm

Shaft cross sectional area 1.979 cm

2

Minim

um casing size

1.979 cm2

Shaft brake horsepower lim

it Standard

97 hp

High strength

125 hpHousing burst pressure lim

it Standard

34,475 kPa

Buttress 41,370 kPa

W

elded 41,370 kPa

Capacity, m3⁄d

Head(m

)

Operating range

E�ciency

Power

Head

50%

40%

30%

20%

10%

0%

E�ciency(%

)Pow

er(hp)

B.E.P.

H = 7.60P = 0.14E = 53.00

Q = 64

REDA ESP systems

Pump Perform

ance Curve D460N 50 Hz / 2,917 rpm

400 Series – 1 Stage(s) – sg 1.00

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 45

Page 48: REDA Electric Submersible Pump Systems

D460N Pump

15.00

12.50

10.00

2.50

5.00

7.50

0 25 50 75 100 125 150

0.50

0.40

0.30

0.20

0.10

REDA ESP systemsREDA Pump Performance Curve D460N 400 Series – 1 Stage(s)

Capacity, m3⁄d

Head(m)

Power(hp)

Fluid SpecificGravity 1.00

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 46

Page 49: REDA Electric Submersible Pump Systems

D800N Pump

Optimum

operating range 400–950 bbl/d

Norm

al housing diameter

4.00 in

Shaft diameter

0.625 in

Shaft cross sectional area 0.307 in

2

Minim

um casing size

5.5 in

Shaft brake horsepower lim

it Standard

94 hp

H

igh strength 150 hp

Housing burst pressure lim

it Standard

5,000 psi

Buttress

6,000 psi

W

elded 6,000 psi

REDA ESP systems

Pump Perform

ance Curve DN800 60 Hz / 3500 rpm

400 Series* – 1 Stage(s) – Sp. Gr.

2500

500750

1,0001,250

1,500

5040302010

1.25

1.00

0.75

0.50

0.25

Capacity, bbl⁄d

Head(ft)

50%

40%

30%

20%

10%

0%

E�ciency(%

)Pow

er(hp)

B.E.P.

H = 25.07P = 0.22E = 59.18

Q = 709

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 47

Page 50: REDA Electric Submersible Pump Systems

Meters2.5 5 7.5 10 12 15

Head(ft)

250

5075

100125

150175

200 3.00

2.50

2.00

1.50

1.00

0.50

Optimum

operating range 33–152 m

3/dNorm

al housing diameter

4.00 in

Shaft diameter

0.688 inShaft cross sectional area

0.371 sq. inM

inimum

casing size 5.500 in

Capacity, m3⁄d

50%

60%

40%

30%

20%

10%

E�ciency(%

)Pow

er(hp)

B.E.P.

H = 7.35P = 0.19E = 61.06

Q = 104

REDA ESP systems

Pump Perform

ance Curve D800N 50 Hz / 2,917 rpm400 Series – 1 Stage(s) – sg 1.00

Shaft brake horsepower lim

it Standard

128 hp

High strength

167 hpHousing burst pressure lim

it Standard

5,000 psi

Buttress 6,000 psi

W

elded 6,000 psi

D800N Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 48

Page 51: REDA Electric Submersible Pump Systems

Meters

2.50

5.00

7.50

10.00

12.50

15.00

REDA ESP systems D800N 400 Series * - 1 Stage(s)AA 1.00Rev. Fluid Specific Gravity

Reda Pump Performance Curve

0 25 50 75 100 125 150 175 200 225 250 275

Hp

Capacity, m3/d

0.10

0.20

0.30

0.40

0.50

0.60

0.70

70 Hz

65 Hz

60 Hz

55 Hz

50 Hz

70 Hz

65 Hz

60 Hz

55 Hz

50 Hz

Head(ft)

Power(hp)

D800N Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 49

Page 52: REDA Electric Submersible Pump Systems

Feet

2500 500 750 1,000 1,250 1,500

60

50

40

30

20

10

3.00

2.50

2.00

1.50

1.00

.50

Optimum operating range 250–1,150 bpdNormal housing diameter 4.00 in Shaft diameter 0.688 inShaft cross sectional area 0.371 sq. inMinimum casing size 5.500 in

Shaft brake horsepower limit Standard 154 hp High strength 200 hpHousing burst pressure limit Standard 5,000 psi Buttress 6,000 psi Welded 6,000 psi

Capacity, bbl/d

Head(ft)

50%

60%

40%

30%

20%

10%

E�ciency(%)

Power(hp) B.E.P.

H = 34.74P = 0.33E = 61.06

Q = 788

REDA ESP systemsPump Performance Curve D800N 60 Hz / 3,500 rpm

400 Series – 1 Stage(s) – sg 1.00

D800N Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 50

Page 53: REDA Electric Submersible Pump Systems

Feet

5

10

15

20

25

30

35

40

45

50

REDA ESP systems D800N 400 Series * - 1 Stage(s)

AA 1.00Rev.Fluid Specific Gravity

Reda Pump Performance Curve

0 250 500 750 1,000 1,250 1,500 1,750 2,000

Hp

Capacity, bbl/d

0.100.200.300.400.500.600.70

70 Hz

65 Hz

60 Hz

55 Hz

50 Hz

70 Hz

65 Hz

60 Hz55 Hz

50 Hz

Head(ft)

Power(hp)

D800N Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 51

Page 54: REDA Electric Submersible Pump Systems

D1050N Pump

387 Series, Min. Casing Size 5½-in [139.7-mm] OD

ES Carbon Steel ARZ-ZZ Carbon Steel ARZ-SS Carbon SteelHousing Length, ft [m] Weight, lbm [kg] Max. Stages CR-CT, FS Part Number Max. Stages CR-CT, FS Part Number Max. Stages CR-CT, FS Part Number10 2.1 [0.64] 45 [20.4] 7 tba† 6 tba 6 tba

20 3.5 [1.07] 75 [34.1] 15 tba 14 tba 14 tba

30 4.9 [149] 105 [47.7] 24 tba 22 tba 22 tba

40 6.3 [1.92] 135 [61.3] 32 tba 31 tba 31 tba

50 7.7 [2.35] 166 [75.4] 41 tba 39 tba 39 tba

60 9.1 [2.78] 195 [88.5] 49 tba 47 tba 47 tba

70 10.5 [3.20] 225 [102.2] 58 100852355 55 100852766 55 100852768

80 11.9 [3.63] 255 [115.8] 66 100557873 64 100558444 64 100558890

90 13.3 [4.06] 285 [129.4] 75 100557874 72 100558445 72 100558891

100 14.7 [4.48] 315 [143.0] 83 100557875 80 100558446 80 100558892

110 16.1 [4.91] 345 [156.6] 92 100557877 88 100558447 88 100558893

120 17.5 [5.34] 375 [170.3] 101 100557878 96 100558448 96 100558894

130 18.9 [5.76] 405 [183.9] 109 100557880 105 100558449 105 100558895

140 20.3 [6.19] 435 [197.5] 118 100557882 113 100558450 113 100558896

150 21.7 [6.62] 465 [211.1] 126 100557885 121 100558451 121 100558897Note: This factory-shimmed pump type should always be installed with a factory-shimmed coupling. If this pump type is mated with other factory-shimmed equipment, no shimming is required during assembly. Conversely, if this pump type is mated with nonfactory-shimmed equipment, the field-shimming procedures must be followed.

† To be assigned.

400 Series, Min. Casing Size 5½-in [139.7-mm] OD

ES Carbon Steel ARZ-ZZ Carbon Steel ARZ-SS Carbon SteelHousing Length, ft [m] Weight, lbm [kg] Max. Stages CR-CT, FS Part Number Max. Stages CR-CT, FS Part Number Max. Stages CR-CT, FS Part Number10 2.1 [0.64] 45 [20.4] 7 tba† 6 tba 6 tba

20 3.5 [1.07] 75 [34.1] 15 tba 14 tba 14 tba

30 4.9 [149] 105 [47.7] 24 tba 22 tba 22 tba

40 6.3 [1.92] 135 [61.3] 32 tba 31 tba 31 tba

50 7.7 [2.35] 166 [75.4] 41 tba 39 tba 39 tba

60 9.1 [2.78] 195 [88.5] 49 tba 47 tba 47 tba

70 10.5 [3.20] 225 [102.2] 58 100850413 55 100850450 55 100850463

80 11.9 [3.63] 255 [115.8] 66 100496395 64 100577818 64 100581278

90 13.3 [4.06] 285 [129.4] 75 100576396 72 100577819 72 100581279

100 14.7 [4.48] 315 [143.0] 83 100576397 80 100577820 80 100581280

110 16.1 [4.91] 345 [156.6] 92 100576398 88 100577821 88 100581282

120 17.5 [5.34] 375 [170.3] 101 100576399 96 100577822 96 100581283

130 18.9 [5.76] 405 [183.9] 109 100576400 105 100577823 105 100581284

140 20.3 [6.19] 435 [197.5] 118 100576401 113 100577824 113 100581321

150 21.7 [6.62] 465 [211.1] 126 100576402 121 100577825 121 100581322

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 52

Page 55: REDA Electric Submersible Pump Systems

D1050N PumpD1050N Pump, 400 Series, Tandem Combinations

Tandem Housing Sections NumberPump Housing Number of Stages 80 90 100 110 120 130 140 150160 132 2

170 141 1 1

180 150 2

190 158 1 1

200 166 2

210 175† ` 1

220 184† 2

230 193† 1 1

240 202† 2

250 210† 1 1

260 218† 2

270 227† 1 1

280 236† 2

290 244† 1 1

300 252† 2

310 258† 2 1

320 267† 1 2

330 276† 3

340 285† 2 1

350 294† 1 2

360 303† 3

370 311† 2 1

380 319† 1 2

390 327† 3

400 336† 2 1

410 345† 1 2

420 354† 3

430 362† 2 1

440 370† 1 2

450 378† 3

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 53

Page 56: REDA Electric Submersible Pump Systems

D1050N Pump

0250

500750

1,0001,250

1,5001,750

2,000

30252015105

3.00

2.50

2.00

1.50

1.00

0.05

Capacity, bbl/d

Optimum

operating range 300 - 1650 bpd

Norm

al housing diameter

4.00 inShaft diam

eter 0.688 inShaft cross sectional area

0.371 sq. inM

inimum

casing size 5.500 in

Shaft brake horsepower lim

it Standard

154 hp

High strength 240 hp

Housing burst pressure limit

Standard 5,000 psi

Buttress

6,000 psi

Welded

N/A psi

REDA ESP systems

Pump Perform

ance Curve D1050N 60 Hz / 3,500 rpm

400 Series – 1 Stage(s) – sg 1.00

B.E.P.

H = 26.07P = 0.30E = 66.51

Q = 1032

Operating range

E�ciency

Power

Head

60%

50%

40%

30%

20%

0%

E�ciency(%

)

Head(ft)

10%

Power

(hp)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 54

Page 57: REDA Electric Submersible Pump Systems

D1050N Pump

40

35

30

25

20

15

10

5

45

0 250 500 750 1,000 1,250 1,500 1,750 2,000

Capacity, bbl/d

0.50

0.45

0.40

0.35

0.30

0.25

0.20

0.15

0.10

0.05

REDA ESP systemsREDA Pump Performance Curve D1050N 400 Series – 1 Stage(s)

Head(ft)

Power(hp)

Fluid SpecificGravity 1.00

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 55

Page 58: REDA Electric Submersible Pump Systems

D1050N Pump

025

5075

100125

150175

200225

60%

50%

40%

30%

20%

10%

6.00

5.00

4.00

3.00

2.00

1.00

3.00

2.50

2.00

1.50

1.00

0.50

Shaft brake horsepower lim

it Standard

128 hp

High strength 200 hp

Housing burst pressure limit

Standard 34,475 kPa

Buttress

41,370 kPa

Welded

N/A kPa

REDA ESP systems

Pump Perform

ance Curve D1050N 50 Hz / 2,917 rpm

400 Series – 1 Stage(s) – sg 1.00

Capacity, m3⁄d

Optimum

operating range 40–219 m

3/dN

ormal housing siam

eter 10.16 cm

Shaft diameter 1.746 cm

Shaft cross sectional area 2.395 cm

2

Minim

um casing size

13.970 cm

B.E.P.

H = 5.52P = 0.17E = 66.51

Q = 137

0%

E�ciency(%

)

Head(m

)

Power

(hp)

Operating range

E�ciency

Power

Head

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 56

Page 59: REDA Electric Submersible Pump Systems

D1050N Pump

15.00

12.50

10.00

2.50

5.00

7.50

0 25 50 75 100 125 150

0.50

0.40

0.30

0.20

0.10

REDA ESP systemsREDA Pump Performance Curve D460N 400 Series – 1 Stage(s)

Capacity, m3⁄d

Head(m)

Power(hp)

Fluid SpecificGravity 1.00

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 57

Page 60: REDA Electric Submersible Pump Systems

D1150N Pump400 Series, Min. Casing Size 5½-in [139.7-mm] OD

ES Carbon Steel ARZ-ZZ Carbon Steel ARZ-SS Carbon SteelHousing Length, ft [m] Weight, lbm [kg] Max. Stages CR-CT, FS Part Number Max. Stages CR-CT, FS Part Number Max. Stages CR-CT, FS Part Number10 2.1 [0.64] 45 [20.4] 13 tba† 10 tba 10 tba

20 3.5 [1.07] 75 [34.1] 30 tba 25 tba 25 tba

30 4.9 [149] 105 [47.7] 46 tba 39 tba 39 tba

40 6.3 [1.92] 135 [61.3] 63 tba 53 tba 53 tba

50 7.7 [2.35] 166 [75.4] 80 100779276 69 100779238 69 tba

60 9.1 [2.78] 195 [88.5] 97 100779304 83 100779241 83 tba

70 10.5 [3.20] 225 [102.2] 114 100779310 97 100779308 97 100779330

80 11.9 [3.63] 255 [115.8] 130 100779816 113 100779311 113 100779825

90 13.3 [4.06] 285 [129.4] 147 100779853 127 100779313 127 100779828

100 14.7 [4.48] 315 [143.0] 164 100779854 142 100779314 142 100779830

110 16.1 [4.91] 345 [156.6] 181 100779857 157 100779316 157 100779831

120 17.5 [5.34] 375 [170.3] 197 100779230 171 100779318 171 100779832† To be assigned.

387 Series, Min. Casing Size 5½-in [139.7-mm] OD

ES Carbon Steel ARZ-ZZ Carbon Steel ARZ-SS Carbon Steel

Housing Length, ft [m] Weight, lbm [kg] Max. Stages CR-CT, FS Part Number Max. Stages CR-CT, FS Part Number Max. Stages CR-CT, FS Part Number

10 2.1 [0.64] 45 [20.4] 13 tba† 10 tba 10 tba

20 3.5 [1.07] 75 [34.1] 30 tba 25 tba 25 tba

30 4.9 [149] 105 [47.7] 46 tba 39 tba 39 tba

40 6.3 [1.92] 135 [61.3] 63 tba 53 tba 53 tba

50 7.7 [2.35] 166 [75.4] 80 100778931 69 100778222 69 tba

60 9.1 [2.78] 195 [88.5] 97 100779850 83 100779249 83 tba

70 10.5 [3.20] 225 [102.2] 114 100779860 97 100779258 97 100779936

80 11.9 [3.63] 255 [115.8] 130 100779862 113 100779260 113 100779224

90 13.3 [4.06] 285 [129.4] 147 100779863 127 100779261 127 100779938

100 14.7 [4.48] 315 [143.0] 164 100779864 142 100779263 142 100779939

110 16.1 [4.91] 345 [156.6] 181 100779865 157 100779254 157 100779940

120 17.5 [5.34] 375 [170.3] 197 100779866 171 100779265 171 100779266Note: This factory-shimmed pump type should always be installed with a factory-shimmed coupling. If this pump type is mated with other factory-shimmed equipment, no shimming is required during assembly. Conversely, if this pump type is mated with nonfactory-shimmed equipment, the field-shimming procedures must be followed.

† To be assigned.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 58

Page 61: REDA Electric Submersible Pump Systems

D1150N PumpD1150N Pump, 400 Series, Tandem Combinations

Tandem Housing Sections NumberPump Housing Number of Stages 60 70 80 90 100 110 120130 211 1 1

140 228 2

150 244 1 1

160 260 2

170 277 1 1

180 294 2

190 311 1 1

200 328† 2

210 345† 1 1

220 362† 2

230 378† 1 1

240 394† 2

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 59

Page 62: REDA Electric Submersible Pump Systems

D1150N Pump

0250

500750

1,0001,250

1,5001,750

2,000

Capacity, bbl/d

605040302010

0.50

1.00

1.50

2.00

2.50

3.00

Optimum

operating range 400–1,650 bbl/d

Norm

al housing diameter

4.00 inchesShaft diam

eter 0.688 inchesShaft cross sectional area

0.371 in2

Minim

um casing size

5.500 inches

Shaft brake horsepower lim

it Standard

154 hp

High strength 200 hp

Buttress

6,000 psi

Housing burst pressure limit

Standard 5,000 psi

W

elded 6,000 psi

REDA ESP systems

Pump Perform

ance Curve D1150N 60 Hz / 3,500 rpm

400 Series – 1 Stage(s) – sg 1.00

B.E.P.

H = 36.87P = 0.49E = 61.03

Q = 110210%

20%

40%

50%

60%

70%

E�ciency(%

)Pow

er(hp)

Head(ft)

30%

Operating range

E�ciency

Power

Head

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 60

Page 63: REDA Electric Submersible Pump Systems

D1150N Pump

50

60

40

30

20

10

0 250 500 750 1,000 1,250 1,500 1,750 2,000 2,250 2,500

Capacity - bbl/d

0.90

0.80

0.70

0.60

0.50

0.40

0.30

0.20

0.10

REDA ESP systemsREDA Pump Performance Curve D1150N 400 Series–1 Stage(s)

Head(ft)

Power(hp)

Fluid SpecificGravity 1.00

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 61

Page 64: REDA Electric Submersible Pump Systems

D1150N Pump

2550

75100

125150

175200

225250

15.00

12.50

10.00

7.50

5.00

2.50

3.00

2.50

2.00

1.50

1.00

0.50

Optimum

operating range 53–219 m

3/dN

ormal housing diam

eter 10.16 cm

Shaft diameter 1.746 cm

Shaft cross sectional area 2.394 cm

2

Minim

um casing size

13.970 cm

Shaft brake horsepower lim

it Standard

128 hp

High strength 167 hp

Housing burst pressure limit

Standard 34,475 kPa

Buttress

41,370 kPa

Welded

41,370 kPa

REDA ESP systems

Pump Perform

ance Curve D1150N 50 Hz / 2,917 rpm

400 Series – 1 Stage(s) – sg 1.00

Capacity, m3⁄d

B.E.P.

H = 7.81P = 0.28E = 61.03

Q = 146

Head(m

)

60%

50%

40%

30%

20%

0%

E�ciency(%

)Pow

er(hp)

10%

Operating range

E�ciency

Power

Head

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 62

Page 65: REDA Electric Submersible Pump Systems

D1150N Pump

12.50

10.00

7.50

5.00

2.50

0 50 100 150 200 250 300 350

0.50

0.45

0.40

0.35

0.30

0.25

0.20

0.15

0.10

0.05

REDA ESP systemsPump Performance Curve D1050N 400 Series – 1 Stage(s)

Capacity, m3⁄d

Head(m)

Power(hp)

Fluid SpecificGravity 1.00

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 63

Page 66: REDA Electric Submersible Pump Systems

400 Series, Min. Casing Size 5½-in [139.7-mm] OD

Carbon Steel ES Carbon Steel ARZ Carbon SteelHousing Length, ft [m] Weight, lbm [kg] Max.

Stages FL-CT Part Number

Max. Stages

FL-CT-ES Part Number

Max. Stages

FL-CT-ARZ Part Number

10 2.1 [0.64] 45 [20.4] 17 tba† 17 tba 13 tba

20 3.5 [1.07] 75 [34.1] 36 tba 36 tba 29 tba

30 4.9 [1.49] 105 [47.7] 54 tba 54 tba 45 tba

40 6.3 [1.92] 135 [61.3] 73 1346386 73 tba 61 tba

50 7.7 [2.35] 165 [74.9] 92 2005388 92 100030084 78 tba

60 9.1 [2.78] 195 [88.5] 110 tba 110 2004453 94 2006230

70 10.5 [3.20] 225 [102.2] 129 1326156 129 tba 110 2006228

80 11.9 [3.63] 255 [115.8] 147 1326164 147 tba 127 tba

90 13.3 [4.06] 285 [129.4] 166 1328103 166 100023140 143 tba

100 14.7 [4.48] 315 [143.0] 184 1315571 184 100023147 160 tba

110 16.1 [4.91] 345 [156.6] 202 1334176 202 D334176 176 tba

120 17.5 [5.34] 375 [170.3] 221 1328111 221 tba 192 tba† To be assigned.

D1400N Pump, 400 Series, Tandem CombinationsTandem Housing Sections Number

Pump Housing Number of Stages 60 70 80 90 100 110 120130 239 1 1

140 258 2

150 276 1 1

160 294 2

170 313 1 1

180 332 2

190 351 1 1

200 370† 2‡

210 387† 1‡ 1‡

220 404† 2‡

230 423† 1‡ 1‡

Note: Stage counts are for FL-CT-ES pumps. † Requires use of buttress threads in uppermost pump. ‡ Requires use of high-strength shaft in lowermost pump.

D1400N Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 64

Page 67: REDA Electric Submersible Pump Systems

D1400N Pump

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

0250

500750

1,0001,250

1,5001,750

2,000

5 10 15 20 25 30

0.50

1.00

1.50

2.00

2.50

3.00

Head(ft)

Power

(hp)

605040302010

Capacity, bbl/d

E�ciency(%

)

Operating range

E�ciency

Head

Power

00

0

REDA ESP systems

Pump Perform

ance Curve D1400N 60 Hz / 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

Optimum

operating range 960–1,700 bbl/d

Norm

al housing diameter

4.00 in Shaft diam

eter 0.688 in

Shaft cross sectional area 0.371 sq. in

2

Minim

um casing size

5.500 in

Shaft brake horsepower lim

it Standard

254 hp

High strength 200 hp

Housing burst pressure limit

Standard 5,000 psi

Buttress

6,000 psi

Welded

6,000 psi

Feet

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 65

Page 68: REDA Electric Submersible Pump Systems

D1400N Pump

5

10

15

20

25

30

35

40

0 250 500 750 1,000 1,250 1,500 1,750 2,000 2,250 2,500

0.10

0.20

0.30

0.40

0.50

Capacity, bbl/d

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA ESP systemsPump Performance Curve D1400N

Curve computed for one stage in fluid of 1.00 sg.

Head(ft)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 66

Page 69: REDA Electric Submersible Pump Systems

D1400N Pump

025

5075

100125

150175

200225

250275

1.00

2.00

3.00

4.00

5.00

6.00

0.50

1.00

1.50

2.00

2.50

3.00

Head(m

)

Power

(hp)

605040302010

Capacity, m3⁄d

E�ciency(%

)

Operating range

E�ciency Head

Power

00

0

Optimum

operating range 127–225 m

3⁄dN

ormal housing diam

eter 10.16 cm

Shaft diameter

1.75 cmShaft cross sectional area

2.39 cm2

Minim

um casing size

13.97 cm

Shaft brake horsepower lim

it Standard

104 hp

High strength 167 hp

Housing burst pressure limit

Standard 34,475 kPa

Buttress

41,370 kPa

Welded

41,370 kPa

REDA ESP systems

Pump Perform

ance Curve D1400N 50 Hz / 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 67

Page 70: REDA Electric Submersible Pump Systems

D1400N Pump

2.50

5.00

7.50

10.00

12.50

0 50 100 150 200 250 300 350 400

0.10

0.20

0.30

0.40

0.50

Capacity, m3/d

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA ESP systemsPump Performance Curve D1400N

Curve computed for one stage in fluid of 1.00 sg.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 68

Page 71: REDA Electric Submersible Pump Systems

400 Series, Min. Casing Size 5½-in [139.7-mm] ODCarbon Steel ES Carbon Steel ARZ Carbon Steel

Housing Length, ft [m] Weight, lbm [kg]

Max. Stages FL-CT Part Number

Max. Stages FL-CT-ES Part Number

Max. Stages FL-CT-ARZ Part Number

10 2.1 [0.64] 45 [20.4] 8 717405 8 100023209 7 1131077

20 3.5 [1.07] 75 [34.1] 16 400754 16 tba† 15 1131085

30 4.9 [1.49] 105 [47.7] 24 400762 24 C400762 23 1131093

40 6.3 [1.92] 135 [61.3] 33 400770 33 C400770 31 1131101

50 7.7 [2.35] 165 [74.9] 41 400788 41 C400788 39 1131119

60 9.1 [2.78] 195 [88.5] 50 400796 50 C400796 47 1131127

70 10.5 [3.20] 225 [102.2] 58 806414 58 C806414 55 1131135

80 11.9 [3.63] 255 [115.8] 67 643015 67 C643015 63 1131143

90 13.3 [4.06] 285 [129.4] 75 707554 75 tba 71 1131150

100 14.7 [4.48] 315 [143.0] 83 400804 83 C400804 79 1131168

110 16.1 [4.91] 345 [156.6] 92 810929 92 C810929 87 1131176

120 17.5 [5.34] 375 [170.3] 100 400812 100 C400812 95 1131184

130 18.9 [5.76] 405 [183.9] 108 883868 108 Q883868 103 1131192

140 20.3 [6.19] 435 [197.5] 116 883876 116 C883876 111 1131200

150 21.7 [6.62] 465 [211.1] 125 883884 125 C883884 118 1131218† To be assigned.

DN1750 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 69

Page 72: REDA Electric Submersible Pump Systems

DN1750 Pump, 400 Series, Tandem CombinationsTandem Housing Sections Number

Pump Housing

Number of Stages

80 90 100 110 120 130 140 150

160 134 2

170 142 1 1

180 150 1 1

190 158 1 1

200 166 2

210 175 1 1

220 184 2

230 192 1 1

240 200 2

250 208 1 1

260 216 2

270 224 1 1

280 232 2

290 241 1 1

300 250 2

310 258 2 1

320 267 1 2

330 276 3

340 284† 2 1

350 292† 1 2

360 300† 3

370 308† 2 1

380 316† 1 2

390 324† 3

400 332† 2 1

410 340† 1‡ 2‡

420 348† 3‡

430 357† 2‡ 1‡

440 366† 1‡ 2‡

450 375†, § 3‡

460 383†, § 1‡ 3‡

470 392†, § 1‡ 3‡

480 400†, § 4‡

490 408†, § 3‡ 1‡

500 416†, § 3‡ 1‡

510 424†, § 1‡ 3‡

520 432†, § 4‡

530 440†, § 3‡ 1‡ Note: Stage counts are for FL-CT-ES pumps. † Requires use of buttress threads in uppermost pump. ‡ Requires use of high-strength shaft in lowermost pump. § Requires use of high-load bearing in protector.

DN1750 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 70

Page 73: REDA Electric Submersible Pump Systems

DN1750 Pump

0250

500750

1,0001,250

1,5001,750

2,0002,250

2,500

5 10 15 20 25 30

0.50

1.00

1.50

2.00

2.50

3.00

Head(ft)

Power

(hp)

605040302010

Capacity, bbl/d

E�ciency(%

)

Operating range

E�ciency

Head

Power

00

0

Optimum

operating range 1,200–2,050 bbl/d

Norm

al housing diameter

4.00 inShaft diam

eter 0.688 in

Shaft cross sectional area 0.371 in

2

Minim

um casing size

5.500 in

Shaft brake horsepower lim

it Standard

125 hp

High strength 200 hp

Housing burst pressure limit

Standard 5,000 psi

Buttress

6,000 psi

Welded

6,000 psi

REDA ESP systems

Pump Perform

ance Curve D1750N 60 Hz / 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 71

Page 74: REDA Electric Submersible Pump Systems

DN1750 Pump

5

10

15

20

25

30

35

40

0 500 1,000 1,500 2,000 2,500 3,000

0.10

0.20

0.30

0.40

0.50

Capacity, bbl/d

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

Head(ft)

REDA ESP systemsPump Performance Curve DN1750

Curve computed for one stage in fluid of 1.00 sg.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 72

Page 75: REDA Electric Submersible Pump Systems

DN1750 Pump

050

100150

200250

300350

1.00

2.00

3.00

4.00

5.00

6.00

0.50

1.00

1.50

2.00

2.50

3.00

Head(m

)

Power

(hp)

605040302010

Capacity, m3⁄d

E�ciency(%

)

Operating range

E�ciency

Head

Power

00

0

Optimum

operating range 159–272 m

3⁄dN

ormal housing diam

eter 10.16 cm

Shaft diameter

1.75 cmShaft cross sectional area

2.39 cm2

Minim

um casing size

13.97 cm

Shaft brake horsepower lim

it Standard

104 hp

High strength 167 hp

Housing burst pressure limit

Standard 34,475 kPa

Buttress

41,370 kPa

Welded

41,370 kPa

REDA ESP systems

Pump Perform

ance Curve DN1750 50 Hz / 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 73

Page 76: REDA Electric Submersible Pump Systems

DN1750 Pump

2.50

5.00

7.50

10.00

12.50

0 50 100 150 200 250 300 350 400 450

0.10

0.20

0.30

0.40

0.50

Capacity, m3/d

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA ESP systemsPump Performance Curve DN1750

Curve computed for one stage in fluid of 1.00 sg.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 74

Page 77: REDA Electric Submersible Pump Systems

400 Series, Min. Casing Size 5½-in [139.7-mm] ODCarbon Steel ES Carbon Steel ARZ Carbon Steel

Housing Length, ft [m]

Weight, lbm [kg]

Max. Stages

FL-CT Part Number

Max. Stages

FL-CT-ES Part Number

Max. Stages

FL-CT-ARZ Part Number

10 2.1 [0.64] 45 [20.4] 8 1183441 8 tba† 7 tba

20 3.5 [1.07] 75 [34.1] 16 1183458 16 tba 15 tba

30 4.9 [1.49] 105 [47.7] 24 1183466 24 tba 23 tba

40 6.3 [1.92] 135 [61.3] 33 1183474 33 tba 31 tba

50 7.7 [2.35] 165 [74.9] 41 1183482 41 tba 39 tba

60 9.1 [2.78] 195 [88.5] 50 1183490 50 tba 47 tba

70 10.5 [3.20] 225 [102.2] 58 1183508 58 tba 55 tba

80 11.9 [3.63] 255 [115.8] 67 1183516 67 tba 63 tba

90 13.3 [4.06] 285 [129.4] 75 1183524 75 100030085 71 tba

100 14.7 [4.48] 315 [143.0] 83 1183532 83 tba 77 1296136

110 16.1 [4.91] 345 [156.6] 92 1183540 92 tba 87 tba

120 17.5 [5.34] 375 [170.3] 100 1183557 100 100030086 95 tba

130 18.9 [5.76] 405 [183.9] 108 1183565 108 tba 103 1329473

140 20.3 [6.19] 435 [197.5] 116 1183573 116 100030088 111 tba

150 21.7 [6.62] 465 [211.1] 125 1183581 125 100030089 118 1345727† To be assigned.

DN1800 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 75

Page 78: REDA Electric Submersible Pump Systems

DN1800 PumpDN1800 Pump, 400 Series, Tandem CombinationsPump Housing

Number of

Tandem Housing Sections Number80 90 100 110 120 130 140 150

160 134 2

170 142 1 1

180 150 1 1

190 158 1 1

200 166 2

210 175 1 1

220 184 2

230 192 1 1

240 200 2

250 208 1 1

260 216 2

270 224 1 1

280 232 2

290 241 1 1

300 250 2

310 258 2 1

320 267 1 2

330 276 3

340 284† 2 1

350 292† 1 2

360 300† 3

370 308† 2 1

380 316† 1 2

390 324† 3

400 332† 2 1

410 340† 1‡ 2‡

420 348† 3‡

430 357† 2‡ 1‡

440 366† 1‡ 2‡

450 375†, § 3‡

460 383†, § 1‡ 3‡

470 392†, § 1‡ 3‡

480 400†, § 4‡

490 408†, § 3‡ 1‡

500 416†, § 3‡ 1‡

510 424†, § 1‡ 3‡

520 432†, § 4‡

530 440†, § 3‡ 1‡ Note: Stage counts are for FL-CT-ES pumps. † Requires use of buttress threads in uppermost pump. ‡ Requires use of high-strength shaft in lowermost pump. § Requires use of high-load bearing in protector.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 76

Page 79: REDA Electric Submersible Pump Systems

DN1800 Pump

0500

1,0001,500

2,0002,500

3,000

5 10 15 20 25 30 35

0.25

0.50

0.75

1.00

1.25

1.50

1.75

Head(ft)

Power

(hp)

70605040302010

Capacity, bbl/d

E�ciency(%

)

Operating range

E�ciency Head

Power

00

0

Optimum

operating range 1,200–2,400 bbl/d

Norm

al housing diameter

4.00 in

Shaft diameter

0.688 inShaft cross sectional area

0.371 in2

Minim

um casing size

5.500 in

Shaft brake horsepower lim

it Standard

125 hp

High strength 200 hp

Housing burst pressure limit

Standard 5,000 psi

Buttress

6,000 psi

Welded

6,000 psi

REDA ESP systems

Pump Perform

ance Curve DN1800 60 Hz / 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 77

Page 80: REDA Electric Submersible Pump Systems

DN1800 Pump

5

10

15

20

25

30

35

40

0 500 1,000 1,500 2,000 2,500 3,000 3,500

0.10

0.20

0.30

0.40

0.50

Capacity, bbl/d

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

Head(ft)

REDA ESP systemsPump Performance Curve DN1800

Curve computed for one stage in fluid of 1.00 sg.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 78

Page 81: REDA Electric Submersible Pump Systems

DN1800 Pump

050

100150

200250

300350

400

1.00

2.00

3.00

4.00

5.00

6.00

7.00

Head(m

)

Capacity, m3⁄d Operating range

E�ciency Head

Power

0.25

0.50

0.75

1.00

1.25

1.50

1.75

Power

(hp)

70605040302010

E�ciency(%

)

00

0

Optimum

operating range 159–318 m

3⁄dN

ormal housing diam

eter 10.16 cm

Shaft diameter

1.75 cmShaft cross sectional area

2.39 cm2

Minim

um casing size

13.97 cm

Shaft brake horsepower lim

it Standard

104 hp

High strength 167 hp

Housing burst pressure limit

Standard 34,475 kPa

Buttress

41,370 kPa

Welded

41,370 kPa

REDA ESP systems

Pump Perform

ance Curve DN1800 50 Hz / 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 79

Page 82: REDA Electric Submersible Pump Systems

DN1800 Pump

2.50

5.00

7.50

10.00

12.50

0 50 100 150 200 250 300 350 400 450 500 550

0.10

0.20

0.30

0.40

0.50

Capacity, m3/d

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA ESP systemsPump Performance Curve DN1800

Curve computed for one stage in fluid of 1.00 sg.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 80

Page 83: REDA Electric Submersible Pump Systems

400 Series, Min. Casing Size 5½-in [139.7-mm] OD

ES Carbon Steel ES Redalloy* AlloyHousing Length, ft [m] Weight, lbm [kg] Max. Stages FL-CT† Part Number Max. Stages FL-CT† Part Number10 2.1 [0.64] 45 [20.4] 8 100254333 8 100254892

20 3.5 [1.07] 75 [34.1] 16 100254342 16 100254893

30 4.9 [1.49] 105 47.7] 24 100254343 24 100254895

40 6.3 [1.92] 135 [61.3] 33 100254345 33 100254896

50 7.7 [2.35] 165 [74.9] 41 100254346 41 100254897

60 9.1 [2.78] 195 [88.5] 50 100254348 50 100254899

70 10.5 [3.20] 225 [102.2] 58 100254349 58 100254900

80 11.9 [3.63] 255 [115.8] 67 100254351 67 100254901

90 13.3 [4.06] 285 [129.4] 75 100254353 75 100254902

100 14.7 [4.48] 315 [143.0] 83 100254354 83 100254903

110 16.1 [4.91] 345 [156.6] 92 100254355 92 100254904

120 17.5 [5.34] 375 [170.3] 100 100253356 100 100254905

130 18.9 [5.76] 405 [183.9] 108 100254357 108 100254906

140 20.3 [6.19] 435 [197.5] 117 100254358 117 100254907

150 21.7 [6.62] 465 [211.1] 125 100254359 125 100254908† This factory-shimmed pump type should always be installed with a factory-shimmed coupling. If this pump type is mated with other factory-shimmed equipment, no shimming is required during assembly. Conversely, if this pump type is mated with nonfactory-shimmed equipment, the field-shimming procedures must be followed.

400 Series, Min. Casing Size 5½-in [139.7-mm] OD

ES Carbon Steel ES Redalloy AlloyHousing Length, ft [m] Weight, lbm [kg] Max. Stages FL-CT† Part Number Max. Stages FL-CT† Part Number10 2.1 [0.64] 45 [20.4] 7 100257674 7 100257927

20 3.5 [1.07] 75 [34.1] 15 100257675 15 100257948

30 4.9 [1.49] 105 47.7] 23 100257676 23 100257949

40 6.3 [1.92] 135 [61.3] 32 100257677 32 100257950

50 7.7 [2.35] 165 [74.9] 40 100257678 40 100257951

60 9.1 [2.78] 195 [88.5] 49 100257679 49 100257952

70 10.5 [3.20] 225 [102.2] 57 100257680 57 100257953

80 11.9 [3.63] 255 [115.8] 66 100257681 66 100257954

90 13.3 [4.06] 285 [129.4] 74 100257682 74 100257955

100 14.7 [4.48] 315 [143.0] 82 100257684 82 100257956

110 16.1 [4.91] 345 [156.6] 91 100257685 91 100257957

120 17.5 [5.34] 375 [170.3] 99 100257686 99 100257958

130 18.9 [5.76] 405 [183.9] 108 100257688 108 100257960

140 20.3 [6.19] 435 [197.5] 116 100257690 116 100257961

150 21.7 [6.62] 465 [211.1] 125 100257691 125 100257962†This factory-shimmed pump type should always be installed with a factory-shimmed coupling. If this pump type is mated with other factory-shimmed equipment, no shimming is required during assembly. Conversely, if this pump type is mated with nonfactory-shimmed equipment, the field-shimming procedures must be followed.

DN2400 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 81

Page 84: REDA Electric Submersible Pump Systems

400 Series, Min. Casing Size 5½-in [139.7-mm] OD

ARZ Carbon Steel ARZ Redalloy AlloyHousing Length, ft [m] Weight, lbm [kg] Max. Stages CR-CT† Part Number Max. Stages CR-CT† Part Number10 2.1 [0.64] 45 [20.4] 6 100258448 6 100258876

20 3.5 [1.07] 75 [34.1] 14 100258449 14 100258877

30 4.9 [1.49] 105 47.7] 22 100258450 22 100258878

40 6.3 [1.92] 135 [61.3] 30 100258451 30 100258879

50 7.7 [2.35] 165 [74.9] 38 100258452 38 100258881

60 9.1 [2.78] 195 [88.5] 46 100258454 46 100258882

70 10.5 [3.20] 225 [102.2] 53 100258455 53 100258883

80 11.9 [3.63] 255 [115.8] 62 100258458 62 100258884

90 13.3 [4.06] 285 [129.4] 70 100258459 70 100258885

100 14.7 [4.48] 315 [143.0] 78 100258460 78 100258886

110 16.1 [4.91] 345 [156.6] 86 100258461 86 100258887

120 17.5 [5.34] 375 [170.3] 93 100258462 93 100258888

130 18.9 [5.76] 405 [183.9] 102 100258463 102 100258889

140 20.3 [6.19] 435 [197.5] 109 100258464 109 100258890

150 21.7 [6.62] 465 [211.1] 117 100258465 117 100258891† This factory-shimmed pump type should always be installed with a factory-shimmed coupling. If this pump type is mated with other factory-shimmed equipment, no shimming is required during assembly. Conversely, if this pump type is mated with nonfactory-shimmed equipment, the field-shimming procedures must be followed.

DN2400 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 82

Page 85: REDA Electric Submersible Pump Systems

DN2400 Pump

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

0500

1,0001,500

2,0002,500

3,0003,500

4,000

10 20 30 40 50 60

0.50

1.00

1.50

2.00

2.50

3.00

Head(ft)

Power

(hp)

605040302010

Capacity, bbl/d

E�ciency(%

)

Operating range

E�ciency

Head

Power

00

0

Optimum

operating range 1,500–3,200 bbl/d

Norm

al housing diameter

4.00 in.

Shaft diameter

0.688 in.Shaft cross sectional area

0.371 in. 2

Minim

um casing size

5.500 in.

Shaft brake horsepower lim

it Standard

162 hp

High strength 245 hp

Housing burst pressure limit

Standard 5,000 psi

Buttress

6,000 psi

Welded

6,000 psi

REDA ESP systems

Pump Perform

ance Curve D2400N 60 Hz / 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 83

Page 86: REDA Electric Submersible Pump Systems

DN2400 Pump

50

45

40

35

30

25

20

15

10

5

0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000

1.00

0.75

0.50

0.25

Capacity, bbl/d

Power,hp

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

Head,ft

REDA ESP systemsPump Performance Curve D2400N

Curve computed for one stage in fluid of 1.00 sg.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 84

Page 87: REDA Electric Submersible Pump Systems

DN2400 Pump

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

050

100150

200250

300350

400450

500550

2.50

5.00

7.50

10.00

12.50

15.00

0.50

1.00

1.50

2.00

2.50

3.00

Head(m

)

Power

(hp)

605040302010

Capacity, m3⁄d

E�ciency(%

)

Operating range

E�ciency

Head

Power

00

0

Optimum

operating range 199–424 m

3⁄dN

ormal housing diam

eter 10.16 cm

Shaft diameter

1.746 cmShaft cross sectional area

2.395 cm2

Minim

um casing size

13.970 cm

Shaft brake horsepower lim

it Standard

135 hp

High strength 204 hp

Housing burst pressure limit

Standard 34,475 kPa

Buttress

41,370 kPa

Welded

41,370 kPa

REDA ESP systems

Pump Perform

ance Curve D2400N 50 Hz / 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 85

Page 88: REDA Electric Submersible Pump Systems

DN2400 Pump

15.00

12.50

10.00

7.50

5.00

2.50

0 100 200 300 400 500 600 700 800

1.00

0.75

0.50

0.25

Capacity, m3/d

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA ESP systemsPump Performance Curve D2400N

Curve computed for one stage in fluid of 1.00 sg.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 86

Page 89: REDA Electric Submersible Pump Systems

D3500N Pump400 Series, Min. Casing Size 5½-in [139.7-mm] OD

ARZ Carbon Steel ARZ Redalloy* High-Nickel Alloy

Housing Length, ft [m] Weight, lbm [kg] Max. Stages CR-CT† Part Number Max. Stages CR-CT† Part Number

30 4.9 [1.49] 105 [47.7] 17 100370062 17 100370135

40 6.3 [1.92] 135 [61.3] 23 100370065 23 100370137

50 7.8 [2.38] 166 [75.4] 29 100370066 29 100370138

60 9.2 [2.80] 196 [89.0] 36 100370067 36 100370139

70 10.6 [3.23] 226 [102.6] 42 100370068 42 100370141

80 12.0 [3.66] 257 [116.7] 48 100370069 48 100370142

90 13.4 [4.08] 287 [130.3] 54 100370070 54 100370143

100 15.0 [4.57] 318 [144.4] 60 100370071 60 100370144

110 16.2 [4.94] 348 [158.0] 66 100370073 66 100370145

120 17.6 [5.36] 378 [171.6] 72 100370074 72 100370147

130 19.0 [5.79] 401 [182.1] 79 100370076 79 100370149

140 20.6 [6.28] 438 [198.9] 85 100370077 85 100370150

150 22.0 [6.71] 477 [216.6] 91 100370079 91 100370151† This factory-shimmed pump type should always be installed with a factory-shimmed coupling. If this pump type is mated with other factory-shimmed equipment, no shimming is required during assembly. Conversely, if this pump type is mated with nonfactory-shimmed equipment, the field-shimming procedures must be followed.

400 Series, Min. Casing Size 5½-in [139.7-mm] OD

ARZ Carbon Steel ARZ Redalloy High-Nickel Alloy

Housing Length, ft [m] Weight, lbm [kg] Max. Stages CR-CT† Part Number Max. Stages CR-CT† Part Number

30 4.9 [1.49] 105 [47.7] 17 100364147 17 tba‡

40 6.3 [1.92] 135 [61.3] 23 100364148 23 tba

50 7.8 [2.38] 166 [75.4] 29 100364149 29 tba

60 9.2 [2.80] 196 [89.0] 35 100364150 35 tba

70 10.6 [3.23] 226 [102.6] 41 100364151 41 tba

80 12.0 [3.66] 257 [116.7] 48 100364153 48 tba

90 13.4 [4.08] 287 [130.3] 54 100364154 54 tba

100 15.0 [4.57] 318 [144.4] 60 100364155 60 100364297

110 16.2 [4.94] 348 [158.0] 66 100364156 66 100364298

120 17.6 [5.36] 378 [171.6] 72 100364157 72 100364319

130 19.0 [5.79] 401 [182.1] 78 100364158 78 100364320

140 20.6 [6.28] 438 [198.9] 84 100364159 84 100364321

150 22.0 [6.71] 477 [216.6] 91 100364160 91 100364322† This factory-shimmed pump type should always be installed with a factory-shimmed coupling. If this pump type is mated with other factory-shimmed equipment, no shimming is required during assembly. Conversely, if this pump type is mated with nonfactory-shimmed equipment, the field-shimming procedures must be followed.

‡ To be assigned.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 87

Page 90: REDA Electric Submersible Pump Systems

D3500N Pump400 Series, Min. Casing Size 5½-in [139.7-mm] OD

ARZ Carbon Steel ARZ Redalloy High-Nickel Alloy

Housing Length, ft [m] Weight, lbm [kg] Max. Stages CR-CT† Part Number Max. Stages CR-CT† Part Number

30 4.9 [1.49] 105 [47.7] 17 100366184 17 tba‡

40 6.3 [1.92] 135 [61.3] 23 100366185 23 tba

50 7.8 [2.38] 166 [75.4] 29 100366186 29 tba

60 9.2 [2.80] 196 [89.0] 35 100366187 35 100541518

70 10.6 [3.23] 226 [102.6] 41 100366188 41 tba

80 12.0 [3.66] 257 [116.7] 47 100366189 47 100541531

90 13.4 [4.08] 287 [130.3] 53 100366190 53 100542404

100 15.0 [4.57] 318 [144.4] 59 100366191 59 100367427

110 16.2 [4.94] 348 [158.0] 65 100366192 65 100367428

120 17.6 [5.36] 378 [171.6] 71 100366193 71 100367429

130 19.0 [5.79] 401 [182.1] 77 100366194 77 100367430

140 20.6 [6.28] 438 [198.9] 83 100366195 83 100367431

150 22.0 [6.71] 477 [216.6] 89 100366196 89 100367432† This factory-shimmed pump type should always be installed with a factory-shimmed coupling. If this pump type is mated with other factory-shimmed equipment, no shimming is required during assembly. Conversely, if this pump type is mated with nonfactory-shimmed equipment, the field-shimming procedures must be followed.

‡ To be assigned.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 88

Page 91: REDA Electric Submersible Pump Systems

D3500N PumpD3500N Pump, 400 Series, Tandem Configurations

Tandem Housing Sections NumberPump Housing Number of Stages 80 90 100 110 120 130 140 150160 96 2

170 102 1 1

180 108 2

190 114 1 1

200 120 2

210 126 1 1

220 132 2

230 138 1 1

240 144 2

250 151 1 1

260 158 2

270 164 1 1

280 170 2

290 176 1 1

300 182 2

310 186 2 1

320 192 1 2

330 198 3

340 204 2 1

350 210 1 2

360 216 3

370 223 2 1

380 230 1 2

390 237 3

400 243 2 1

410 249 1 2

420 255 3

430 261 2 1

440 267 1 2

450 273 3

460 278 2 2

470 284 1 1 2

480 290 2 2

490 296 1 1 2

500 302 2 2

510 308 1 1 2

520 314 2 2

530 320 1 1 2

540 326 2 2

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 89

Page 92: REDA Electric Submersible Pump Systems

D3500N Pump

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

01,000

2,0003,000

4,0005,000

6,000

5 10 15 20 25 30

0.50

1.00

1.50

2.00

2.50

3.00

Head,ft

Power,

hp

605040302010

Capacity, bbl/d

E�ciency ,%

00

0

Power

Head

E�ciency

Operating range

Optimum

operating range 2,400–4,500 bbl/d

Norm

al housing diameter

4.00 in

Shaft diameter

0.870 inShaft cross sectional area

0.601 in2

Minim

um casing size

5.500 in

Shaft brake horsepower lim

it Standard

316 hp

High strength 492 hp

Housing burst pressure limit

Standard N

ot applicable

Buttress 6,000 psi

W

elded N

ot applicable

REDA ESP systems

Pump Perform

ance Curve D3500N 60 Hz / 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 90

Page 93: REDA Electric Submersible Pump Systems

D3500N Pump

5

10

15

20

25

30

35

40

45

0 1,000 2,000 3,000 4,000 5,000 6,000 7,000

0.25

0.50

0.75

1.00

1.75

1.50

1.25

Power,hp

Head,ft

Capacity, bbl/d

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA ESP systemsPump Performance Curve D3500N

Curve computed for one stage in fluid of 1.00 sg.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 91

Page 94: REDA Electric Submersible Pump Systems

D3500N Pump

0100

200300

400500

600700

800

1.00

2.00

3.00

4.00

5.00

6.00

0.50

1.00

1.50

2.00

2.50

3.00

Head,m

Power,

hp

605040302010

Capacity, m3⁄d

E�ciency,%

Operating range

E�ciency

Head

Power

00

0

Optimum

operating range 318–596 m

3⁄dN

ormal housing diam

eter 4.00 in

Shaft diam

eter 0.870 in

Shaft cross sectional area 0.601 in

2

Minim

um casing size

5.500 in

Shaft brake horsepower lim

it Standard

263 hp

High strength 410 hp

Housing burst pressure limit

Standard N

ot applicable

Buttress 6,000 psi

W

elded N

ot applicable

REDA ESP systems

Pump Perform

ance Curve D3500 50 Hz / 2,917 rpmCurve com

puted for one stage in fluid of 1.00 sg.

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 92

Page 95: REDA Electric Submersible Pump Systems

400 Series, Min. Casing Size 5½-in [139.7-mm] OD

Carbon Steel ES Carbon Steel ARZ-ZT Carbon SteelHousing Length,

ft [m] Weight, lbm [kg]

Max. Stages

C-CT Part Number

Max. Stages

C-CT-ES Part Number

Max. Stages

C-CT-ARZ-ZT Part Number

10 2.1 [0.64] 45 [20.4] 3 tba† 3 tba 3 tba

20 3.5 [1.07] 75 [34.1] 8 tba 8 tba 8 tba

30 4.9 [1.49] 105 [47.7] 12 tba 12 tba 12 tba

40 6.3 [1.92] 135 [61.3] 17 tba 17 tba 17 tba

50 7.7 [2.35] 165 [74.9] 22 tba 22 tba 22 tba

60 9.1 [2.78] 195 [88.5] 26 tba 26 tba 26 tba

70 10.5 [3.20] 225 [102.2] 31 tba 31 tba 31 tba

80 11.9 [3.63] 255 [115.8] 35 tba 35 2003305 35 tba

90 13.3 [4.06] 285 [129.4] 40 tba 40 tba 40 tba

100 14.7 [4.48] 315 [143.0] 44 tba 44 tba 44 tba

110 16.1 [4.91] 345 [156.6] 49 tba 49 tba 49 tba

120 17.5 [5.34] 375 [170.3] 54 tba 54 tba 54 2000234

130 18.9 [5.76] 405 [183.9] 58 1319433 58 D319433 58 1319458

140 20.3 [6.19] 435 [197.5] 63 tba 63 2003310 63 tba

150 21.7 [6.62] 465 [211.1] 67 tba 67 tba 67 tba† To be assigned.

D5800N Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 93

Page 96: REDA Electric Submersible Pump Systems

D5800N Pump, 400 Series, Tandem Combinations

Tandem Housing Sections Number

Pump Housing

Number of Stages 80 90 100 110 120 130 140 150

160 70 2

170 75 1 1

180 80 2

190 84 1 1

200 88 2

210 93 1 1

220 98 2

230 103 1 1

240 108 2

250 112 1 1

260 116 2

270 121 1 1

280 126 2

290 130 1 1

300 134 2

310 137 2 1

320 142 1 2

330 147 3

340 152 2 1

350 157 1 2

360 162 3

370 166 2 1

380 170 1 2

390 174 3

400 179 2 1

410 184 1 2

420 189 3‡

430 193 2‡ 1‡

440 197† 1‡ 2‡

450 201† 3‡

460 206† 1‡ 3‡

470 211† 1‡ 3‡

480 216† 4‡

490 220† 3‡ 1‡

500 223† 1‡ 3‡

510 228† 1‡ 3‡

520 232† 4‡

530 237† 3‡ 1‡ Note: Stage counts are for C-CT-ES pumps. † Requires use of high-load bearing in protector. ‡ Requires use of high-strength shaft in lowermost pump.

D5800N Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 94

Page 97: REDA Electric Submersible Pump Systems

D5800N Pump

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

01,000

2,0003,000

4,0005,000

6,0007,000

8,000

5 10 15 20 25 30 35

0.50

1.00

1.50

2.00

2.50

3.00

3.50

Head(ft)

Capacity, bbl/d

Operating range

E�ciency

Head

Power

Power

(hp)

70605040302010

E�ciency(%

)

00

0

Optimum

operating range 4,400–7,000 bbl/d

Norm

al housing diameter

4.00 in.

Shaft diameter

0.875 in.Shaft cross sectional area

0.601 in. 2

Minim

um casing size

5.500 in.

Shaft brake horsepower lim

it Standard

255 hp

High strength 410 hp

Housing burst pressure limit

Standard 5,000 psi

Buttress

6,000 psi

Welded

6,000 psi

REDA ESP systems

Pump Perform

ance Curve D5800N 60 Hz / 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 95

Page 98: REDA Electric Submersible Pump Systems

D5800N Pump

5

10

15

20

25

30

35

40

0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000

0.25

0.50

0.75

1.00

1.25

1.50

1.75

2.00

2.25

Capacity, bbl/d

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

Head(ft)

REDA ESP systemsPump Performance Curve D5800N

Curve computed for one stage in fluid of 1.00 sg.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 96

Page 99: REDA Electric Submersible Pump Systems

0100

200300

400500

600700

800900

1,0001,1 00 Pow

er(hp)

Capacity, m3⁄d

E�ciency(%

)

1.000

2.00

3.00

4.00

5.00

6.00

7.00

0.50

0 1.00

1.50

2.00

2.50

3.00

3.50

Head(m

)

706050403020100

Head

E�ciency

Power

Operating range

Optimum

operating range 583–927 m

3⁄dN

ormal housing diam

eter 10.16 cm

Shaft diameter

2.22 cmShaft cross sectional area

3.88 cm2

Minim

um casing size

13.97 cm

Shaft brake horsepower lim

it Standard

213 hp

High strength 342 hp

Housing burst pressure limit

Standard 34,475 kPa

Buttress

41,370 kPa

Welded

41,370 kPa

REDA ESP systems

Pump Perform

ance Curve D5800N 50 Hz / 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

D5800N Pump

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 97

Page 100: REDA Electric Submersible Pump Systems

2.50

5.00

7.50

10.00

0 250 500 750 1,000 1,250 1,500

0.25

0.50

0.75

1.00

1.25

1.50

1.75

2.00

2.25

Capacity, m3/d

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA ESP systemsPump Performance Curve D5800N

Curve computed for one stage in fluid of 1.00 sg.

D5800N Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—D Series Pumps 98

Page 101: REDA Electric Submersible Pump Systems

RC1000 Pump

Optimum

operating range 200–1,350 bpd

Norm

al housing diameter

4.00 in

Shaft diameter

0.688 inShaft cross sectional area

0.371 sq. in.M

inimum

casing size 5.500 in.

Shaft brake horsepower lim

it Standard

0 hp

High strength 240 hp

Housing burst pressure limit

Standard 5,000 psi

Buttress

6,000 psi

Welded

N/A psi

REDA ESP systems

Pump Perform

ance Curve REDA Continuum* Unconventional Extended-Life EST Stage RC1000 Pum

p 60 Hz / 3,500 rpm400 Series – 1 Stage(s) – sg 1.00

0250

500750

1,0001,250

1,5001,750

2,000 Power

(hp)

Capacity, bbl/d

E�ciency(%

)

0 5 10 15 20 25 30

0.50

1.00

1.50

2.00

2.50

3.00

Head(ft)

60504030201000

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—REDA Continuum Pumps 99

Page 102: REDA Electric Submersible Pump Systems

B.E.P.Q=130H

=5.86P=0.17E=68.41

Optimum

operating range 26–179 m

3/dN

ormal housing diam

eter 4.00 in

Shaft diam

eter 0.688 in

Shaft cross sectional area 0.371 sq. in.

Minim

um casing size

5.500 in.

Shaft brake horsepower lim

it Standard

0 hp

High strength 200 hp

Housing burst pressure limit

Standard 5,000 psi

Buttress

6,000 psi

Welded

N/A psi

REDA ESP systems

Pump Perform

ance Curve REDA Continuum* Unconventional Extended-Life EST Stage RC1000 Pum

p 50 Hz / 2,917 rpm400 Series – 1 Stage(s) – Sp. Gr. 1.00

025

5075

100125

150175

200225 Pow

er(hp)

Capacity, m3⁄d

E�ciency(%

)

0

1.00

2.00

3.00

4.00

5.00

6.00

0.50

1.00

1.50

2.00

2.50

3.00

Head(m

)

60504030201000

RC1000 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—REDA Continuum Pumps 100

Page 103: REDA Electric Submersible Pump Systems

Optimum

operating range 200–1,350 bpd

Norm

al housing diameter

4.00 in

Shaft diameter

0.688 inShaft cross sectional area

0.371 sq. in.M

inimum

casing size 5.500 in.

Shaft brake horsepower lim

it Standard

0 hp

High strength 240 hp

Housing burst pressure limit

Standard 5,000 psi

Buttress

6,000 psi

Welded

N/A psi

REDA ESP systems

Pump Perform

ance Curve REDA Continuum* Unconventional Extended-Life EST Stage RC1000 Pum

p 60 Hz / 3,500 rpm400 Series – 1 Stage(s) – sg 1.00

0250

500750

1,0001,250

1,5001,750

2,000 Power

(hp)

Capacity, bbl/d

E�ciency(%

)

0 5 10 15 20 25 30

0.50

1.00

1.50

2.00

2.50

3.00

Head(ft)

6050403020100

B.E.P.Q=130H

=5.86P=0.17E=68.41

RC1000 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—REDA Continuum Pumps 101

Page 104: REDA Electric Submersible Pump Systems

70 Hz

65 Hz

60 Hz

55 Hz

50 Hz

0 250 500 750 1,000 1,250 1,500 1,750 2,000

70 Hz

65 Hz

60 Hz

55 Hz

50 Hz

REDA ESP systemsPump Performance Curve RC1000

400 Series - 1 Stage(s) - Sp. Gr.

20

15

10

5

25

30

35

40

45

0.05

0.25

0.20

0.15

0.10

0.30

0.40

0.35

0.50

0.45

Power(hp)

Head(ft)

Capacity, bbl/d

RC1000 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—REDA Continuum Pumps 102

Page 105: REDA Electric Submersible Pump Systems

70 Hz

65 Hz

60 Hz

55 Hz

50 Hz

0 50 100 150 200 250 300

70 Hz

65 Hz

60 Hz

55 Hz

50 Hz

REDA ESP systemsPump Performance Curve RC1000

400 Series - 1 Stage(s) - Sp. Gr.

5.00

2.50

7.50

10.00

12.50

0.05

0.25

0.20

0.15

0.10

0.30

0.40

0.35

0.50

0.45

Power(hp)

Head(m)

Capacity, bbl/d

RC1000 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—REDA Continuum Pumps 103

Page 106: REDA Electric Submersible Pump Systems

RC2500 Pump

Optimum

operating range 1,000–3,200 bpd

Norm

al housing diameter

4.00 inShaft diam

eter 0.688 in

Shaft cross sectional area 0.371 sq. in.

Minim

um casing size

5.500 in.

Shaft brake horsepower lim

it Standard

0 hp

High strength 240 hp

Housing burst pressure limit

Standard 5,000 psi

Buttress

6,000 psi

Welded

6,000 psi

REDA ESP systems

Pump Perform

ance Curve REDA Continuum* Unconventional Extended-Life EST Stage RC2500 Pum

p 60 Hz / 3,500 rpm400 Series – 1 Stage(s) – sg 1.00

0500

1,0002,000

1,5002,500

3,0003,500

4,000 Power

(hp)

Capacity, bbl/d

E�ciency(%

)

0 5 10 15 20 25 30

0.50

0 1.00

1.50

2.00

2.50

3.00

Head(ft)

6050403020100

B.E.P.Q=2526H

=23.92P=0.65E=68.06

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—REDA Continuum Pumps 104

Page 107: REDA Electric Submersible Pump Systems

RC2500 Pump

Optimum

operating range 132–424 m

3⁄dN

ormal housing diam

eter 4.00 in.

Shaft diameter

0.688 in.Shaft cross sectional area

0.371 sq. in.M

inimum

casing size 5.500 in.

Shaft brake horsepower lim

it Standard

0 hp

High strength 200 hp

Housing burst pressure limit

Standard 5,000 psi

Buttress

6,000 psi

Welded

6,000 psi

050

100150

200250

300350

400450

500550 Pow

er(hp)

Capacity, m3⁄d

E�ciency(%

)

1.000

2.00

3.00

4.00

5.00

6.00

0.50

0 1.00

1.50

2.00

2.50

3.00

Head(m

)

6050403020100

REDA ESP systems

Pump Perform

ance Curve REDA Continuum* Unconventional Extended-Life EST Stage RC2500 Pum

p 50 Hz / 2,917 rpm400 Series – 1 Stage(s) – sg 1.00

B.E.P.Q=335H

=5.06P=0.38E=68.06

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—REDA Continuum Pumps 105

Page 108: REDA Electric Submersible Pump Systems

RC2500 Pump

Optimum

operating range 1,000–3,200 bpd

Norm

al housing diameter

4.00 in.Shaft diam

eter 0.688 in.

Shaft cross sectional area 0.371 sq. in.

Minim

um casing size

5.500 in.

Shaft brake horsepower lim

it Standard

0 hp

High strength 240 hp

Housing burst pressure limit

Standard 5,000 psi

Buttress

6,000 psi

Welded

6,000 psiPow

er(hp)

(%)

0.50

0 1.00

1.50

2.00

2.50

3.006050403020100

REDA ESP systems

Pump Perform

ance Curve REDA Continuum* Unconventional Extended-Life EST Stage RC2500 Pum

p 60 Hz / 3,500 rpm400 Series – 1 Stage(s) – sg 1.00

0500

1,0002,000

1,5002,500

3,0003,500

4,000

Capacity, bbl/d

0 5 10 15 20 25 30

Head(ft)

B.E.P.Q=2526H

=23.92P=0.65E=68.06

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—REDA Continuum Pumps 106

Page 109: REDA Electric Submersible Pump Systems

RC2500 Pump

70 Hz

65 Hz

60 Hz

55 Hz

50 Hz

70 Hz

65 Hz

60 Hz

55 Hz

50 Hz

REDA ESP systemsPump Performance Curve RC2500

400 Series - 1 Stage(s) - Sp. Gr.

20

15

10

5

25

30

35

40

0.50

0.25

0.75

1.00

Power(hp)

Head(ft)

Capacity, bbl/d

5,0004,5004,0003,5002,5007505002500 3,0001,000

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—REDA Continuum Pumps 107

Page 110: REDA Electric Submersible Pump Systems

RC2500 Pump

70 Hz

65 Hz

60 Hz

55 Hz

50 Hz

70 Hz

65 Hz

60 Hz

55 Hz

50 Hz

REDA ESP systemsPump Performance Curve RC2500

400 Series - 1 Stage(s) - Sp. Gr.

10.00

7.50

5.00

2.50

12.50

0.50

0.25

0.75

1.00

Power(hp)

Head(m)

8007006004002001000 500300

Capacity, m3⁄d

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—REDA Continuum Pumps 108

Page 111: REDA Electric Submersible Pump Systems

RC4000 Pump

Optimum

operating range 3,500–7,000 bpd

Norm

al housing diameter

4.00 inShaft diam

eter 0.875 in

Shaft cross sectional area 0.610 sq. in.

Minim

um casing size

5.500 in.

Shaft brake horsepower lim

it Standard

315 hp

High strength 492 hp

Housing burst pressure limit

Standard 6,000 psi

Buttress

N/A psi

W

elded N

/A psi

REDA ESP systems

Pump Perform

ance Curve REDA Continuum* Unconventional Extended-Life EST Stage RC4000 Pum

p 60 Hz / 3,500 rpm400 Series – 1 Stage(s) – sg 1.00

01,000

2,0003,000

4,0005,000

6,0007,000

8,000 Power

(hp)

Capacity, bbl/d

E�ciency(%

)

0 5 10 15 20 25 30 35

1.00

0 2.00

3.00

4.00

5.00

6.00

7.00

Head(ft)

706050403020100

B.E.P.Q=4,310H

=32.82P=1.39E=75.17

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—REDA Continuum Pumps 109

Page 112: REDA Electric Submersible Pump Systems

RC4000 Pump

0100

200300

400500

600700

8001,000

900

Power

(hp)

Capacity, m3⁄d

E�ciency(%

)

0

1.00

2.00

3.00

4.00

5.00

6.00

7.00

0.50

0 1.00

1.50

2.00

2.50

3.00

3.50

Head(m

)

706050403020100

Optimum

operating range 464–927 m

3/dN

ormal housing diam

eter 4.00 in

Shaft diameter

0.875 inShaft cross sectional area

0.610 sq. in.M

inimum

casing size 5.500 in.

Shaft brake horsepower lim

it Standard

263 hp

High strength 410 hp

Housing burst pressure limit

Standard 6,000 psi

Buttress

N/A psi

W

elded N

/A psi

REDA ESP systems

Pump Perform

ance Curve REDA Continuum* Unconventional Extended-Life EST Stage RC4000 Pum

p 50 Hz / 2,917 rpm400 Series – 1 Stage(s) – sg 1.00

B.E.P.Q=571H

=6.95P=0.80E=75.17

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—REDA Continuum Pumps 110

Page 113: REDA Electric Submersible Pump Systems

RC4000 Pump

Optimum

operating range 3,500–7,000 bpd

Norm

al housing diameter

4.00 inShaft diam

eter 0.875 in

Shaft cross sectional area 0.610 sq. in.

Minim

um casing size

5.500 in.

Shaft brake horsepower lim

it Standard

315 hp

High strength 492 hp

Housing burst pressure limit

Standard 6,000 psi

Buttress

N/A psi

W

elded N

/A psi

REDA ESP systems

Pump Perform

ance Curve REDA Continuum* Unconventional Extended-Life EST Stage RC4000 Pum

p 60 Hz / 3,500 rpm400 Series – 1 Stage(s) – sg 1.00

01,000

2,0003,000

4,0005,000

6,0007,000

8,000 Power

(hp)

Capacity, bbl/d

E�ciency(%

)

0 5 10 15 20 25 30 35

1.00

0 2.00

3.00

4.00

5.00

6.00

7.00

Head(ft)

706050403020100

B.E.P.Q=4,310H

=32.82P=1.39E=75.17

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—REDA Continuum Pumps 111

Page 114: REDA Electric Submersible Pump Systems

RC4000 Pump

70 Hz

65 Hz

60 Hz

55 Hz

50 Hz

70 Hz

65 Hz

60 Hz

55 Hz

50 Hz

REDA ESP systemsPump Performance Curve RC4000

400 Series - 1 Stage(s) - Sp. Gr.

20

15

10

5

25

30

35

40

45

0.25

1.25

1.00

0.75

0.50

1.50

2.00

1.75

2.50

2.25

Power(hp)

Head(ft)

9,0008,0007,0006,0004,0002,0001,0000 5,0003,000

Capacity, bbl⁄d

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—REDA Continuum Pumps 112

Page 115: REDA Electric Submersible Pump Systems

RC4000 Pump

70 Hz

65 Hz

60 Hz

55 Hz

50 Hz

70 Hz

65 Hz

60 Hz

55 Hz

50 Hz

10.00

7.50

5.00

2.50

12.50

0.75

1.50

1.25

2.00

2.25

2.50

0.50

0.25

1.00

1.75

Power(hp)

Head(m)

1,5001,2507505002500 1,000

Capacity, m3⁄d

REDA ESP systemsPump Performance Curve RC4000

400 Series - 1 Stage(s) - Sp. Gr.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—REDA Continuum Pumps 113

Page 116: REDA Electric Submersible Pump Systems

540 Series, Min. Casing Size 65⁄8-in [168.3-mm] ODCarbon Steel ES Carbon Steel ARZ Carbon Steel

Housing Length, ft [m]

Weight, lbm [kg]

Max. Stages

FL-CT Part Number

Max. Stages

FL-CT-ES Part Number

Max. Stages

FL-CT-ARZ Part Number

10 2.1 [0.64] 77 [35.0] 12 1019033 12 tba† 9 1132927

20 3.5 [1.07] 145 [65.8] 28 1019710 28 D019710 22 1132935

30 4.9 [1.49] 213 [96.7] 43 1019728 43 tba 35 1132943

40 6.3 [1.92] 281 [127.6] 59 1019736 59 D019736 47 1132950

50 7.7 [2.35] 349 [158.4] 75 1019744 75 D019744 62 1132968

60 9.1 [2.78] 417 [189.3] 90 1019041 90 D019041 74 1132976

70 10.5 [3.20] 485 [220.2] 106 1019751 106 D019751 87 1132984

80 11.9 [3.63] 553 [251.1] 122 1019769 122 1246685 101 1132992

90 13.3 [4.06] 621 [281.9] 137 1019777 137 tba 114 1133008† To be assigned

GN1600 Pump, 540 Series, Tandem CombinationsTandem Housing Sections Number

Pump Housing

Number of Stages

50 60 70 80 90

100 150 2

110 165 1 1

120 180 2

130 196† 1 1

140 212†, ‡ 2

150 228†, ‡ 1 1† Note: Stage counts are for FL-CT-ES pumps Requires use of high-load bearing in protector ‡ Requires use of buttress threads in uppermost pump

GN1600 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 114

Page 117: REDA Electric Submersible Pump Systems

GN1600 Pump

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

0250

500750

1,0001,250

1,5001,750

2,0002,250

2,5002,750

10 20 30 40 50 60

0.50

1.00

1.50

2.00

2.50

3.00

Head(ft)

Power

(hp)

605040302010

Capacity (bbl/d)

E�ciency(%

)

REDA* ESP GN

1600 Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

Operating range

E�ciency Head

Power

Optimum

operating range 1,000–2,150 bbl/d

Shaft brake-power lim

it Standard

256 hpN

ominal housing diam

eter 5.13 in.

High strength

410 hp

Shaft diameter 0.875 in.

Housing burst-pressure limit

Standard 5,000 psi

Shaft cross-sectional area 0.601 in. 2

Buttress

6,000 psiM

in. casing size 6.625 in.

W

elded 6,000 psi

00

0

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 115

Page 118: REDA Electric Submersible Pump Systems

GN1600 Pump

10

20

30

40

50

60

70

0 500 1,000 1,500 2,000 2,500 3,000 3,500

0.25

0.50

0.75

1.00

1.25

1.50

Capacity (bbl/d)

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA* Pump GN1600 Performance CurveCurve computed for one stage in fluid of 1.00 sg.

Head(ft)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 116

Page 119: REDA Electric Submersible Pump Systems

GN1600 Pump

050

100150

200250

300350

2.50

5.00

7.50

10.00

12.50

15.00

0.50

00

0

1.00

1.50

2.00

2.50

3.00

Head(m

)

Power

(hp)

605040302010

Capacity (m3⁄d)

E�ciency(%

)

Optimum

operating range 132–285 m

3⁄d Shaft brake-pow

er limit

Standard 213 hp

Nom

inal housing diameter

13.03 cm

High strength

342 hp

Shaft diameter 2.22 cm

Housing burst-pressure lim

it Standard

34,475 kPa Shaft cross-sectional area

3.88 cm2

Buttress

41,370 kPaM

in. casing size 16.83 cm

Welded

41,370 kPa

REDA* ESP GN

1600 Pump Perform

ance Curve 50 H

z, 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

Operating range

E�ciency Head

Power

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 117

Page 120: REDA Electric Submersible Pump Systems

GN1600 Pump

2.50

5.00

7.50

10.00

12.50

15.00

17.50

20.00

22.50

0 50 100 150 200 250 300 350 400 450 500

0.25

0.50

0.75

1.00

1.25

1.50

Capacity (m3/d)

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA* Pump GN1600 Performance CurveCurve computed for one stage in fluid of 1.00 sg.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 118

Page 121: REDA Electric Submersible Pump Systems

540 Series, Min. Casing Size 65⁄8-in [168.3-mm] ODCarbon Steel ES Carbon Steel ARZ Carbon Steel

Housing Length, ft [m]

Weight, lbm [kg]

Max. Stages

FL-CT Part Number

Max. Stages

FL-CT-ES Part Number

Max. Stages

FL-CT-ARZ Part Number

10 2.1 [0.64] 77 [35.0] 10 1072198 10 tba† 7 1130855

20 3.5 [1.07] 145 [65.8] 22 1146489 22 tba 18 1130863

30 4.9 [1.49] 213 [96.7] 35 1157262 35 R157262 28 1130871

40 6.3 [1.92] 281 [127.6] 48 1045269 48 tba 39 1070713

50 7.7 [2.35] 349 [158.4] 61 1045277 61 1179464 50 1070721

60 9.1 [2.78] 417 [189.3] 74 1045285 74 tba 61 1070739

70 10.5 [3.20] 485 [220.2] 86 1045293 86 tba 72 1070747

80 11.9 [3.63] 553 [251.1] 99 1045301 99 1235563 83 1070754

90 13.3 [4.06] 621 [281.9] 111 1045319 111 100030884 94 1070762

100 14.7 [4.48] 689 [312.8] 124 1045327 124 tba 105 1070770

110 16.1 [4.91] 757 [343.7] 137 1045335 137 D045335 116 1070788† To be assigned

GN2100 Pump, 540 Series, Tandem CombinationsTandem Housing Sections Number

Pump Housing

Number of Stages 60 70 80 90 100 110

120 146 2

130 158 1 1

140 170 2

150 183† 1 1

160 196† 2

170 209†, ‡ 1 1

180 222†, ‡ 2

190 235†, ‡ 1§ 1§

200 248†, ‡ 2§ Note: Stage counts are for FL-CT-ES pumps † Requires use of high-load bearing in protector ‡ Requires use of buttress threads in uppermost pump § Requires use of high-strength shaft in lowermost pump

GN2100 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 119

Page 122: REDA Electric Submersible Pump Systems

GN2100 Pump

0500

1,0001,500

2,0002,500

3,0003,500

10 20 30 40 50 60

0.50

1.00

1.50

2.00

2.50

3.00

Head(ft)

Power

(hp)

605040302010

Capacity (bbl/d)

E�ciency(%

)

REDA* ESP GN

2100 Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

Operating range

E�ciency

Head

Power

Optimum

operating range 1,650–2,700 bbl/d

Shaft brake-power lim

it Standard

256 hpN

ominal housing diam

eter 5.13 in.

High strength

410 hp

Shaft diameter 0.875 in.

Housing burst-pressure limit

Standard 5,000 psi

Shaft cross-sectional area 0.601 in. 2

Buttress

6,000 psiM

in. casing size 6.625 in.

W

elded 6,000 psi

00

0

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 120

Page 123: REDA Electric Submersible Pump Systems

GN2100 Pump

10

20

30

40

50

60

70

0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000

0.25

0.50

0.75

1.00

1.25

1.50

1.75

Capacity (bbl/d)

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA* Pump GN2100 Performance CurveCurve computed for one stage in fluid of 1.00 sg.

Head(ft)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 121

Page 124: REDA Electric Submersible Pump Systems

GN2100 Pump

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

050

100150

200250

300350

400450

2.50

5.00

7.50

10.00

12.50

15.00

0.50

1.00

1.50

2.00

2.50

3.00

Head(m

)

Power

(hp)

6050403020100

Capacity (m3⁄d)

E�ciency(%

)

Optimum

operating range 219–358 m

3⁄d Shaft brake-pow

er limit

Standard 213 hp

Nom

inal housing diameter

13.03 cm

High strength

342 hp

Shaft diameter 2.22 cm

Housing burst-pressure lim

it Standard

34,475 kPaShaft cross-sectional area

3.88 cm2

Buttress

41,370 kPaM

in. casing size 16.83 cm

Welded

41,370 kPa

REDA* ESP GN

2100 Pump Perform

ance Curve 50 H

z, 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

Operating range

E�ciency Head

Power

00

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 122

Page 125: REDA Electric Submersible Pump Systems

GN2100 Pump

2.50

5.00

7.50

10.00

12.50

15.00

17.50

20.00

22.50

0 100 200 300 400 500 600 700

0.25

0.50

0.75

1.00

1.25

1.50

1.75

Capacity (m3/d)

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA* Pump GN2100 Performance CurveCurve computed for one stage in fluid of 1.00 sg.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 123

Page 126: REDA Electric Submersible Pump Systems

540 Series, Min. Casing Size 65⁄8-in [168.3-mm] ODCarbon Steel ES Carbon Steel ARZ Carbon Steel

Housing Length, ft [m]

Weight, lbm [kg]

Max. Stages

FL-CT Part Number

Max. Stages

FL-CT-ES Part Number

Max. Stages

FL-CT-ARZ Part Number

10 2.1 [0.64] 77 [35.0] 9 1250125 9 tba† 7 1130822

20 3.5 [1.07] 145 [65.8] 20 1316066 20 tba 17 1130830

30 4.9 [1.49] 213 [96.7] 32 1156975 32 D156975 26 1130848

40 6.3 [1.92] 281 [127.6] 44 1041391 44 tba 36 1070804

50 7.7 [2.35] 349 [158.4] 55 1041409 55 1243633 47 1070812

60 9.1 [2.78] 417 [189.3] 67 1041417 67 D041417 56 1070820

70 10.5 [3.20] 485 [220.2] 79 1041425 79 D041425 66 1070838

80 11.9 [3.63] 553 [251.1] 90 1041433 90 tba 76 1070846

90 13.3 [4.06] 621 [281.9] 102 1041441 102 D041441 86 1070853

100 14.7 [4.48] 689 [312.8] 114 1041458 114 D041458 97 1070861

110 16.1 [4.91] 757 [343.7] 125 1041466 125 tba 106 1070879

120 17.5 [5.34] 825 [374.6] 137 1041474 137 tba 116 1070887† To be assigned

GN3200 Pump, 540 Series, Tandem CombinationsTandem Housing Sections Number

Pump Housing

Number of Stages 60 70 80 90 100 110 120

130 144 1 1

140 156 2

150 168† 1 1

160 180† 2‡

170 191† 1‡ 1‡

180 202†, § 2‡

190 214†, § 1‡ 1‡

200 226†, § 2‡

210 237†, § 1‡ 1‡

Note: Stage counts are for FL-CT-ES pumps † Requires use of high-load bearing in protector ‡ Requires use of high-strength shaft in lowermost pump § Requires use of buttress threads in uppermost pump

GN3200 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 124

Page 127: REDA Electric Submersible Pump Systems

GN3200 Pump

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

0500

1,0001,500

2,0002,500

3,0003,500

4,0004,500

5,0005,500

10 20 30 40 50 60

0.50

1.00

1.50

2.00

2.50

3.00

Head(ft)

Power

(hp)

605040302010

Capacity (bbl/d)

E�ciency(%

)

REDA* ESP GN

3200 Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

Operating range

E�ciency

Head

Power

Optimum

operating range 2,200–4,100 bbl/d

Shaft brake-power lim

it Standard

256 hpN

ominal housing diam

eter 5.13 in.

High strength

410 hp

Shaft diameter 0.875 in.

Housing burst-pressure limit

Standard 5,000 psi

Shaft cross-sectional area 0.601 in. 2

Buttress

6,000 psiM

in. casing size 6.625 in.

W

elded 6,000 psi

00

0

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 125

Page 128: REDA Electric Submersible Pump Systems

GN3200 Pump

10

20

30

40

50

60

70

0 1,000 2,000 3,000 4,000 5,000 6,000

0.25

0.50

0.75

1.00

1.25

1.50

1.75

2.00

2.25

Capacity (bbl/d)

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA* Pump GN3200 Performance CurveCurve computed for one stage in fluid of 1.00 sg.

Head(ft)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 126

Page 129: REDA Electric Submersible Pump Systems

GN3200 Pump

0500

1,0001,500

2,0002,500

3,0003,500

4,0004,500

5,0005,500

10 20 30 40 50 60

0.50

1.00

1.50

2.00

2.50

3.00

Head(ft)

Power

(hp)

605040302010

Capacity (bbl/d)

E�ciency(%

)

REDA* ESP GN

3200 Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

Operating range

E�ciency

Head

Power

Optimum

operating range 2,200–4,100 bbl/d

Shaft brake-power lim

it Standard

256 hpN

ominal housing diam

eter 5.13 in.

High strength

410 hp

Shaft diameter 0.875 in.

Housing burst-pressure limit

Standard 5,000 psi

Shaft cross-sectional area 0.601 in. 2

Buttress

6,000 psiM

in. casing size 6.625 in.

W

elded 6,000 psi

00

0

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 127

Page 130: REDA Electric Submersible Pump Systems

GN3200 Pump

2.50

5.00

7.50

10.00

12.50

15.00

17.50

20.00

22.50

0 100 200 300 400 500 600 700 800 900 1,000

0.25

0.50

0.75

1.00

1.25

1.50

1.75

2.00

2.25

Capacity (m3/d)

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA* Pump GN3200 Performance CurveCurve computed for one stage in fluid of 1.00 sg.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 128

Page 131: REDA Electric Submersible Pump Systems

540 Series, Min. Casing Size 65⁄8-in [168.3-mm] OD

Carbon Steel ES Carbon Steel ARZ Carbon Steel

HousingLength, ft [m]

Weight, lbm [kg]

Max. Stages

FL-CT Part Number

Max. Stages

FL-CT-ES Part Number

Max. Stages

FL-CT-ARZ Part Number

10 2.1 [0.64] 77 [35.0] 5 884486 5 C884486 4 1136977

20 3.5 [1.07] 145 [65.8] 12 884494 12 C884494 11 1136985

30 4.9 [1.49] 213 [96.7] 18 884502 18 Q884502 17 1136993

40 6.3 [1.92] 281 [127.6] 25 884510 25 C884510 24 1137009

50 7.7 [2.35] 349 [158.4] 32 884528 32 tba† 30 1137017

60 9.1 [2.78] 417 [189.3] 39 884536 39 tba 37 1137025

70 10.5 [3.20] 485 [220.2] 46 884544 46 C884544 43 1137033

80 11.9 [3.63] 553 [251.1] 52 884551 52 C884551 50 1137041

90 13.3 [4.06] 621 [281.9] 59 884569 59 tba 56 1137470

100 14.7 [4.48] 689 [312.8] 66 884577 66 tba 63 1137488

110 16.1 [4.91] 757 [343.7] 73 656140 73 C656140 70 1137496

120 17.5 [5.34] 825 [374.6] 79 884585 79 C884585 76 1137504

130 18.9 [5.76] 893 [405.4] 86 884593 86 tba 83 1137512

140 20.3 [6.19] 961 [463.3] 93 884601 93 Q884601 89 1137520

150 21.7 [6.62] 1,029 [467.2] 100 884619 100 C884619 95 1137538† To be assigned

GN4000 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 129

Page 132: REDA Electric Submersible Pump Systems

GN4000 Pump, 540 Series, Tandem CombinationsTandem Housing Sections Number

Pump Housing

Number of Stages 60 70 80 90 100 110 120

160 104 2

170 111 1 1

180 118 2

190 125 1 1

200 132 2

210 139† 1 1

220 146† 2

230 152† 1 1

240 158† 2

250 165† 1 1

260 172† 2

270 179† 1‡ 1‡

280 186† 2‡

290 193† 1‡

300 200†

310 205† 2‡ 1‡

320 212† 1‡ 2‡

330 219†, § 3‡

340 225†, § 2‡ 1‡

350 231†, § 1‡ 2‡

360 237†, § 3‡

370 244†, § 2‡ 1‡

380 251†, § 1‡ 2‡

390 258†, § 3‡ Note: Stage counts are for FL-CT-ES pumps † Requires use of high-load bearing in protector ‡ Requires use of high-strength shaft in lowermost pump § Requires use of buttress threads in uppermost pump

GN4000 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 130

Page 133: REDA Electric Submersible Pump Systems

GN4000 Pump

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

01,000

2,0003,000

4,0005,000

6,0007,000

10 20 30 40 50 60

0.50

1.00

1.50

2.00

2.50

3.00

Head(ft)

Power

(hp)

605040302010

Capacity (bbl/d)

E�ciency(%

)

REDA* ESP GN

4000 Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

Operating range

E�ciency

Head

Power

Optimum

operating range 3,200–4,800 bbl/d

Shaft brake-power lim

it Standard

375 hpN

ominal housing diam

eter 5.13 in.

High strength

600 hp

Shaft diameter 1.000 in.

Housing burst-pressure limit

Standard 5,000 psi

Shaft cross-sectional area 0.785 in. 2

Buttress

6,000 psiM

in. casing size 6.625 in.

W

elded 6,000 psi

00

0

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 131

Page 134: REDA Electric Submersible Pump Systems

GN4000 Pump

10

20

30

40

50

60

70

0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000

0.25

0.50

0.75

1.00

1.25

1.50

1.75

2.00

2.25

Capacity (bbl/d)

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA* Pump GN4000 Performance CurveCurve computed for one stage in fluid of 1.00 sg.

Head(ft)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 132

Page 135: REDA Electric Submersible Pump Systems

GN4000 Pump

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

0100

200300

400500

600700

800900

2.50

5.00

7.50

10.00

12.50

15.00

0.50

1.00

1.50

2.00

2.50

3.00

Head(m

)

Power

(hp)

605040302010

Capacity (m3⁄d)

E�ciency(%

)

Optimum

operating range 424–636 m

3⁄d Shaft brake-pow

er limit

Standard 313 hp

Nom

inal housing diameter

13.03 cm

High strength

500 hp

Shaft diameter 2.54 cm

Housing burst-pressure lim

it Standard

34,475 kPaShaft cross-sectional area

5.07 cm2

Buttress

41,370 kPaM

in. casing size 16.83 cm

Welded

41,370 kPa

REDA* ESP GN

4000 Pump Perform

ance Curve 50 H

z, 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

Operating range

E�ciency

Head

Power

00

0

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 133

Page 136: REDA Electric Submersible Pump Systems

GN4000 Pump

2.50

5.00

7.50

10.00

12.50

15.00

17.50

20.00

0 250 500 750 1,000 1,250

0.25

0.50

0.75

1.00

1.25

1.50

1.75

2.00

2.25

Capacity (m3/d)

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA* Pump GN4000 Performance CurveCurve computed for one stage in fluid of 1.00 sg.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 134

Page 137: REDA Electric Submersible Pump Systems

GN5200 Pump, 540 Series, Tandem Combinations

Tandem Housing Sections Number

Pump Housing

Number of Stages 60 70 80 90 100 110 120

160 72 2

170 76 1 1

180 80 2

190 85 1 1

200 90 2

210 95 1 1

220 100 2

230 104 1 1

240 108 2

250 113 1 1

260 118 2

270 123 1 1

280 128 2

290 132 1

300 136

310 140 2 1

320 145 1 2

330 150 3

340 154 2 1

350 158 1 2

360 162† 3

370 167† 2 1

380 172† 1 2

390 177† 3

400 182† 2 1

410 187† 1 2

420 192† 3

430 196† 2

440 200† 1

450 204†

460 207† 1 3

470 212† 1 3

480 216† 4‡

490 221† 3‡ 1‡

500 227† 1‡ 3‡

510 231† 1‡ 3‡

520 236† 4‡

530 241† 3‡ 1‡

Note: Stage counts are for FL-CT-ES pumps † Requires use of high-load bearing in protector ‡ Requires use of high-strength shaft in lowermost pump

GN5200 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 135

Page 138: REDA Electric Submersible Pump Systems

540 Series, Min. Casing Size 65⁄8-in [168.3-mm] OD

ES Carbon Steel ARZ Carbon Steel

HousingLength, ft [m]

Weight, lbm [kg]

Max. Stages

FL-CT-ES Part Number

Max. Stages

FL-CT-ARZ Part Number

10 2.1 [0.64] 77 [35.0] 3 tba† 3 tba

20 3.5 [1.07] 145 [65.8] 8 tba 8 tba

30 4.9 [1.49] 213 [96.7] 13 tba 12 tba

40 6.3 [1.92] 281 [127.6] 17 100071150 17 100071582

50 7.7 [2.35] 349 [158.4] 22 100071153 22 100071585

60 9.1 [2.78] 417 [189.3] 27 100071168 26 100071586

70 10.5 [3.20] 485 [220.2] 31 100071170 31 100071587

80 11.9 [3.63] 553 [251.1] 36 100071171 36 100071588

90 13.3 [4.06] 621 [281.9] 41 100071172 40 100071603

100 14.7 [4.48] 689 [312.8] 45 100071173 45 100071619

110 16.1 [4.91] 757 [343.7] 50 100071176 50 100071620

120 17.5 [5.34] 825 [374.6] 54 100071177 54 100071622

130 18.9 [5.76] 893 [405.4] 59 100071178 59 100071623

140 20.3 [6.19] 961 [463.3] 64 100071180 64 100071624

150 21.7 [6.62] 1,029 [467.2] 68 100071183 68 100071625† To be assigned

GN5200 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 136

Page 139: REDA Electric Submersible Pump Systems

GN5200 Pump

01,000

2,0003,000

4,0005,000

6,0007,000

8,0009,000

10 20 30 40 50 60

1.00

2.00

3.00

4.00

5.00

6.00

Head(ft)

Power

(hp)

605040302010

Capacity (bbl/d)

E�ciency(%

)

REDA* ESP GN

5200 Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

Operating range

E�ciency Head

Power

Optimum

operating range 3,900–6,600 bbl/d

Shaft brake-power lim

it Standard

375 hpN

ominal housing diam

eter 5.13 in.

High strength

600 hp

Shaft diameter 1.000 in.

Housing burst-pressure limit

Standard 5,000 psi

Shaft cross-sectional area 0.785 in. 2

Buttress

6,000 psiM

in. casing size 6.625 in.

W

elded 6,000 psi

00

0

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 137

Page 140: REDA Electric Submersible Pump Systems

GN5200 PumpREDA* Pump GN5200 Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

10

20

30

40

0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000

0.50

1.00

1.50

2.00

2.50

Capacity (bbl/d)

Power(hp)

Head(ft)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

50

60

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 138

Page 141: REDA Electric Submersible Pump Systems

GN5200 Pump

0100

200300

400500

600700

800900

1,0001,100

2.50

5.00

7.50

10.00

12.50

15.00

0.50

1.00

1.50

2.00

2.50

3.00

Head(m

)

Power

(hp)

605040302010

Capacity (m3⁄d)

E�ciency(%

)

Optimum

operating range 517–874 m

3⁄d Shaft brake-pow

er limit

Standard 313 hp

Nom

inal housing diameter

13.03 cm

High strength

500 hp

Shaft diameter 2.54 cm

Housing burst-pressure lim

it Standard

34,475 kPaShaft cross-sectional area

5.07 cm2

Buttress

41,370 kPaM

in. casing size 16.83 cm

Welded

41,370 kPa

REDA* ESP GN

5200 Pump Perform

ance Curve 50 H

z, 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

Operating range

E�ciency

Head

Power

00

0

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 139

Page 142: REDA Electric Submersible Pump Systems

GN5200 Pump

2.50

5.00

7.50

10.00

12.50

15.00

17.50

0 250 500 750 1,000 1,250 1,500

0.50

1.00

1.50

2.00

2.50

Capacity (m3/d)

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA* Pump GN5200 Performance CurveCurve computed for one stage in fluid of 1.00 sg.

Head(m)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 140

Page 143: REDA Electric Submersible Pump Systems

538 Series, Min. Casing Size 7-in [177.8-mm] OD

Carbon Steel ES Carbon Steel ARZ Carbon SteelHousing Length,

ft [m]Weight, lbm [kg]

Max. Stages

FL-CT Part Number

Max. Stages

FL-CT-ES Part Number

Max. Stages

FL-CT-ARZ Part Number

10 2.1 [0.64] 93 [42.2] 10 1238443 10 tba† 8 1245513

20 3.5 [1.07] 157 [71.3] 23 1238450 23 tba 18 1245521

30 4.9 [1.49] 221 [100.3] 36 1238468 36 tba 29 1245539

40 6.3 [1.92] 285 [129.4] 49 1238476 49 D238476 40 1245547

50 7.7 [2.35] 349 [158.4] 62 1238484 62 D238484 52 1245554

60 9.1 [2.78] 413 [187.5] 75 1238492 75 D238492 63 1245562

70 10.5 [3.20] 477 [216.6] 88 1238500 88 D23850P 74 1245570

80 11.9 [3.63] 541 [245.6] 101 1238518 101 D238518 86 1245588

90 13.3 [4.06] 605 [274.7] 114 1238526 114 D238526 97 1245596

100 14.7 [4.48] 669 [303.7] 127 1238534 127 D238534 109 1245604

110 16.1 [4.91] 733 [332.8] 140 1238542 140 D238542 120 1245612

120 17.5 [5.34] 797 [361.8] 154 1238559 154 100030144 131 1245620† To be assigned

SN2600 Pump, 538 Series, Tandem Combinations

Tandem Housing Sections NumberPump Housing

Number of Stages

60 70 80 90 100 110 120

130 163† 1 1

140 176† 2

150 189†, ‡ 1§ 1§

160 202†, ‡ 2§

170 215†, ‡ 1§ 1§

Note: Stage counts are for FL-CT-ES pumps † Requires use of high-load bearing in protector ‡ Requires use of buttress threads in uppermost pump § Requires use of high-strength shaft in lowermost pump

G6200N Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 141

Page 144: REDA Electric Submersible Pump Systems

G6200N Pump, 540 Series, Tandem CombinationsTandem Housing Sections Number

Pump Housing

Number of Stages 80 90 100 110 120 130 140 150

160 72 2

170 77 1 1

180 81 1 1

190 86 1 1

200 90† 2

210 95† 1 1

220 100† 2

230 104† 1 1

240 108† 2

250 113† 1 1

260 118† 2

270 123† 1 1

280 128† 2

290 132† 1 1

300 136† 2

310 140† 2 1

320 145† 1 2

330 150† 3

340 154† 2 1

350 158† 1 2

360 162† 3

370 167† 2‡ 1‡

380 172† 1‡ 2‡

390 177†, § 3‡

400 182†, § 2‡ 1‡

410 187†, § 1‡ 2‡

420 192†, § 3‡

430 196†, § 2‡ 1‡

440 200†, § 1‡ 2‡

450 204†, § 3‡

460 207†, § 1‡ 3‡

470 212†, § 1‡ 3‡

480 216†, § 4‡

490 221†, § 3‡, †† 1‡, ††

500 226†, § 3‡, †† 1‡, ††

510 231†, § 1‡, †† 3‡, ††

520 236†, § 4‡, ††

530 241†, § 3‡, †† 1‡, ††

540 245†, § 3‡, †† 0‡, †† 1‡, ††

550 250†, § 2‡, †† 1‡, †† 1‡, ††

560 254†, § 2‡, †† 0‡, †† 2‡, ††

570 259†, § 1‡, †† 1‡, †† 2‡, ††

580 264†, § 2‡, †† 2‡, ††

590 268†, § 1‡, †† 3‡, ††

600 272†, § 4‡, ††

Note Stage counts are for FL-CT-ES pumps † Requires use of high-load bearing in protector for compression pumps ‡ Requires use of high-strength shaft in lowermost pump § Requires use of high-load bearing in protector for floater pumps †† Requires use of buttress head

G6200N Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 142

Page 145: REDA Electric Submersible Pump Systems

G6200N Pump

01,000

2,0003,000

4,0005,000

6,0007,000

8,0009,000

100 20 30 40 50 60 70

1.00

0 2.00

3.00

4.00

5.00

6.00

7.00

Head(ft)

Capacity (bbl/d)

REDA* ESP G6200N

Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.Operating range

E�ciency

Head

Power

Power

(hp)

706050403020100

E�ciency(%

)

Optimum

operating range 4,500–8,000 bbl/d

Shaft brake-power lim

it Standard

375 hpN

ominal housing diam

eter 5.13 in.

High strength

600 hp

Shaft diameter 1.00 in.

Housing burst-pressure limit

Standard 5,000 psi

Shaft cross-sectional area 0.785 in. 2

Buttress

6,000 psiM

in. casing size 6.625 in.

W

elded 6,000 psi

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 143

Page 146: REDA Electric Submersible Pump Systems

G6200N Pump

10

20

30

40

50

60

70

0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000 11,000

0.50

1.00

1.50

2.00

2.50

3.00

3.50

Capacity (bbl/d)

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA* Pump G6200N Performance CurveCurve computed for one stage in fluid of 1.00 sg.

Head(ft)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 144

Page 147: REDA Electric Submersible Pump Systems

G6200N Pump

0250

500750

1,0001,250

2.500

5.00

7.50

10.00

12.50

15.00

17.50

0.50

0 1.00

1.50

2.00

2.50

3.00

3.50

Head(m

)

Capacity (m3⁄d)

REDA* ESP G6200N

Pump Perform

ance Curve 50 H

z, 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

Operating range

E�ciency

Head

Power

Power

(hp)

706050403020100

E�ciency(%

)

Optimum

operating range 596–1,060 m

3⁄d Shaft brake-pow

er limit

Standard 313 hp

Nom

inal housing diameter

13.03 cm

High strength

500 hp

Shaft diameter 2.54 cm

Housing burst-pressure lim

it Standard

34,475 kPaShaft cross-sectional area

5.07 cm2

Buttress

41,370 kPaM

in. casing size 16.83 cm

Welded

41,370 kPa

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 145

Page 148: REDA Electric Submersible Pump Systems

G6200N Pump

2.50

5.00

7.50

10.00

12.50

15.00

17.50

20.00

0 250 500 750 1,000 1,250 1,500 1,750

0.50

1.00

1.50

2.00

2.50

3.00

3.50

Capacity (m3/d)

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA* Pump G6200N Performance CurveCurve computed for one stage in fluid of 1.00 sg.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 146

Page 149: REDA Electric Submersible Pump Systems

540 Series, Min. Casing Size 65⁄8-in [168.3-mm] ODCarbon Steel ES Carbon Steel ARZ Carbon Steel

Housing Length, ft [m]

Weight, lbm [kg]

Max. Stages

FL-CT Part Number

Max. Stages

FL-CT-ES Part Number

Max. Stages

FL-CT-ARZ Part Number

10 2.1 [0.64] 77 [35.0] 2 0885194 2 tba† 2 tba

20 3.5 [1.07] 145 [65.8] 6 0885202 6 tba 6 tba

30 4.9 [1.49] 213 [96.7] 10 0885210 10 tba 10 tba

40 6.3 [1.92] 281 [127.6] 14 0885228 14 tba 14 tba

50 7.7 [2.35] 349 [158.4] 18 0885236 18 tba 18 tba

60 9.1 [2.78] 417 [189.3] 22 0885244 22 tba 22 tba

70 10.5 [3.20] 485 [220.2] 26 0885251 26 tba 26 tba

80 11.9 [3.63] 553 [251.1] 30 0885269 30 tba 30 tba

90 13.3 [4.06] 621 [281.9] 34 0885277 34 tba 34 tba

100 14.7 [4.48] 689 [312.8] 38 0885285 38 tba 38 tba

110 16.1 [4.91] 757 [343.7] 42 0885293 42 tba 42 tba

120 17.5 [5.34] 825 [374.6] 46 0885301 46 tba 46 tba

130 18.9 [5.76] 893 [405.4] 50 0885319 50 tba 50 tba

140 20.3 [6.19] 961 [463.3] 54 0885327 54 tba 54 tba

150 21.7 [6.62] 1,029 [467.2] 58 0885335 58 100012580 58 tba† To be assigned

GN10000 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 147

Page 150: REDA Electric Submersible Pump Systems

GN10000 Pump, 540 Series, Tandem Combinations

Tandem Housing Sections Number

Pump Housing

Number of Stages 80 90 100 110 120 130 140

160 60 2

170 64 1 1

180 68 2

190 72 1 1

200 76 2

210 80 1 1

220 84 2

230 88 1 1

240 92 2

250 96 1 1

260 100 2

270 104 1 1

280 108 2

290 112 1

300 116

310 118† 2 1

320 122† 1 2

330 126† 3

340 130† 2 1

350 134† 1 2

360 138† 3

370 142† 2 1

380 146† 1 2

390 150† 3

400 154† 2 1

410 158† 1 2

420 162† 3

430 166† 2

440 170† 1

450 174†

460 178† 1 3

470 182† 1 3

480 186† 4

490 190† 3 1

500 194† 3

510 200† 1 3

520 204† 4

530 208† 3 1Note: Stage counts are for FL-CT-ES pumps † Requires use of high-load bearing in protector

GN10000 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 148

Page 151: REDA Electric Submersible Pump Systems

02,500

5,0007,500

10,00012,500

15,00017,500

20,000

10 20 30 40 50 60 70

2.50

5.00

7.50

10.00

12.50

15.00

17.50

Head(ft)

70605040302010

Capacity (bbl/d)

E�ciency(%

)

Optimum

operating range 7,000–12,000 bbl/d

Shaft brake-power lim

it Standard

637 hpN

ominal housing diam

eter 5.13 in.

High strength

1,019hp

Shaft diameter 1.188 in.

Housing burst-pressure limit

Standard 5,000 psi

Shaft cross-sectional area 1.108 in. 2

Buttress

6,000 psiM

in. casing size 6.625 in.

W

elded 6,000 psi

Operating range

E�ciency

Head

Power

00

0

REDA* ESP GN

10000 Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

Power

(hp)

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

GN10000 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 149

Page 152: REDA Electric Submersible Pump Systems

GN10000 Pump

10

20

30

40

50

0 2,500 5,000 7,500 10,000 12,500 15,000 17,500 20,000

0.50

1.00

1.50

2.00

2.50

3.00

3.50

4.00

4.50

5.00

Head(ft)

Power(hp)

Capacity (bbl/d)

REDA* Pump GN10000 Performance CurveCurve computed for one stage in fluid of 1.00 sg.

70 Hz

65 Hz

60 Hz

55 Hz

50 Hz

70 Hz

65 Hz

60 Hz

55 Hz

50 Hz

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 150

Page 153: REDA Electric Submersible Pump Systems

GN10000 Pump

0250

500750

1,0001,250

1,5001,750

2,0002,250

2.500

5.00

7.50

10.00

12.50

15.00

17.50

1.00

0 2.00

3.00

4.00

5.00

6.00

7.00

Head(m

)

Capacity (m3⁄d)

REDA* ESP GN

10000 Pump Perform

ance Curve 50 H

z, 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

Operating range

E�ciency

Head

Power

Power

(hp)

706050403020100

E�ciency(%

)

Optimum

operating range 927–1,590 m

3⁄d Shaft brake-pow

er limit

Standard 531 hp

Nom

inal housing diameter

13.03 cm

High strength

849 hp

Shaft diameter 3.02 cm

Housing burst-pressure lim

it Standard

34,475 kPaShaft cross-sectional area

7.15 cm2

Buttress

41,370 kPaM

in. casing size 16.83 cm

Welded

41,370 kPa

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 151

Page 154: REDA Electric Submersible Pump Systems

GN10000 Pump

2.50

5.00

7.50

10.00

0 500 1,000 1,500 2,000 2,500 3,000

0.50

1.00

1.50

2.00

2.50

3.00

3.50

4.00

4.50

5.00

Capacity (m3/d)

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA* Pump GN10000 Performance CurveCurve computed for one stage in fluid of 1.00 sg.

12.50

15.00

17.50

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—G Series Pumps 152

Page 155: REDA Electric Submersible Pump Systems

562 Series, Min. Casing Size 7-in [177.8-mm] OD

Carbon Steel ES Carbon Steel ARZ Carbon SteelHousing Length,

ft [m]Weight, lbm [kg]

Max. Stages

C-CT Part Number

Max. Stages

C-CT-ES Part Number

Max. Stages

C-CT-ARZ Part Number

10 2.1 [0.64] 98 [44.5] 3 tba† 3 tba 3 1141514

20 3.5 [1.07] 163 [74.0] 7 tba 7 tba 7 1141522

30 4.9 [1.49] 228 [103.5] 11 tba 11 tba 11 1141530

40 6.3 [1.92] 293 [133.0] 15 tba 15 tba 15 1141548

50 7.7 [2.35] 356 [161.6] 20 1299734 20 1241157 20 1141555

60 9.1 [2.78] 410 [186.1] 24 1229327 24 tba 24 1141563

70 10.5 [3.20] 473 [214.7] 28 1229244 28 tba 28 1141571

80 11.9 [3.63] 532 [241.5] 32 1294651 32 1246644 32 1141589

90 13.3 [4.06] 599 [271.9] 37 tba 37 tba 37 1141597

100 14.7 [4.48] 658 [298.7] 41 1229269 41 1246651 41 1141605

110 16.1 [4.91] 716 [325.1] 45 tba 45 tba 45 1141613

120 17.5 [5.34] 774 [351.4] 49 tba 49 tba 49 1141621

130 18.9 [5.76] 833 [378.2] 54 tba 54 tba 54 1141639

140 20.3 [6.19] 891 [404.5] 58 1253988 58 tba 58 1141647† To be assigned

562 Series, Min. Casing Size 7-in [177.8-mm] OD

Carbon Steel ES Carbon Steel ARZ Carbon Steel

HousingLength, ft [m]

Weight, lbm [kg]

Max. Stages

C-LT Part Number

Max. Stages

C-LT-ES Part Number

Max. Stages

C-LT-ARZ Part Number

10 2.1 [0.64] 98 [44.5] 3 tba† 3 tba 3 1136142

20 3.5 [1.07] 163 [74.0] 7 tba 7 tba 7 1136159

30 4.9 [1.49] 228 [103.5] 11 tba 11 tba 11 1136167

40 6.3 [1.92] 293 [133.0] 15 tba 15 tba 15 1136175

50 7.7 [2.35] 356 [161.6] 20 tba 20 tba 20 1136183

60 9.1 [2.78] 410 [186.1] 24 tba 24 tba 24 1136191

70 10.5 [3.20] 473 [214.7] 28 tba 28 tba 28 1136209

80 11.9 [3.63] 532 [241.5] 32 tba 32 tba 32 1136217

90 13.3 [4.06] 599 [271.9] 37 tba 37 tba 37 1136225

100 14.7 [4.48] 658 [298.7] 41 tba 41 tba 41 1136233

110 16.1 [4.91] 716 [325.1] 45 tba 45 tba 45 1136241

120 17.5 [5.34] 774 [351.4] 49 tba 49 tba 49 1136258

130 18.9 [5.76] 833 [378.2] 54 tba 54 tba 54 1136266

140 20.3 [6.19] 891 [404.5] 58 tba 58 tba 58 1136274† To be assigned

HN13500 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—H Series Pumps 153

Page 156: REDA Electric Submersible Pump Systems

HN13500 Pump

02,500

5,0007,500

10,00012,500

15,00017,500

20,00022,500

10 20 30 40 50 60

2.50

5.00

7.50

10.00

12.50

15.00

Head(ft)

Power

(hp)

605040302010

Capacity (bbl/d)

E�ciency(%

)

REDA* ESP H

N13500 Pum

p Performance Curve

60 Hz, 3,500 rpm

Curve com

puted for one stage in fluid of 1.00 sg.

Operating range

E�ciency Head

Power

Optimum

operating range 5,000–18,000 bbl/d

Shaft brake-power lim

it Standard

375 hpN

ominal housing diam

eter 5.38 in.

High strength

600 hp

Shaft diameter 1.000 in.

Housing burst-pressure limit

Standard 3,000 psi

Shaft cross-sectional area 0.785 in. 2

Buttress

Not applicable

Min. casing size

7.000 in.

Welded

3,600 psi

00

0

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—H Series Pumps 154

Page 157: REDA Electric Submersible Pump Systems

HN13500 Pump

10

20

30

40

50

60

70

80

0 2,500 5,000 7,500 10,000 12,500 15,000 17,500 20,000 22,500 25,000

1.00

2.00

3.00

4.00

5.00

6.00

7.00

8.00

9.00

10.00

Capacity (B/D)

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA* Pump HN13500 Performance CurveCurve computed for one stage in fluid of 1.00 sg.

Head(ft)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—H Series Pumps 155

Page 158: REDA Electric Submersible Pump Systems

HN13500 Pump

0500

1,0001,500

2,0002,500

3,000

2.50

5.00

7.50

10.00

12.50

15.00

2.50

5.00

7.50

10.00

12.50

15.00

Head(m

)

Power

(hp)

605040302010

Capacity (m3⁄d)

E�ciency(%

)

Optimum

operating range 662–2,385 m

3⁄d Shaft brake-pow

er limit

Standard 313 hp

Nom

inal housing diameter

14.30 cm

High strength

500 hp

Shaft diameter 2.54 cm

Housing burst-pressure lim

it Standard

20,685 kPaShaft cross-sectional area

5.07 cm2

Buttress

Not applicable

Min. casing size

17.78 cm

W

elded 24,822 kPa

REDA* ESP H

N13500 Perform

ance Curve Pump

50 Hz, 2,917 rpm

Curve com

puted for one stage in fluid of 1.00 sg.

Operating range

E�ciency

HeadPower

00

0

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—H Series Pumps 156

Page 159: REDA Electric Submersible Pump Systems

HN13500 Pump

2.50

5.00

7.50

10.00

12.50

15.00

17.50

20.00

22.50

25.00

0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000

1.00

2.00

3.00

4.00

5.00

6.00

7.00

8.00

9.00

10.00

Capacity (m3/d)

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA* Pump HN13500 Performance CurveCurve computed for one stage in fluid of 1.00 sg.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—H Series Pumps 157

Page 160: REDA Electric Submersible Pump Systems

562 Series, Min. Casing Size 7-in [177.8-mm] OD

ES Carbon Steel ARZ Carbon Steel

HousingLength, ft [m]

Weight, lbm [kg]

Max. Stages

C-CT-ES Part Number

Max. Stages

C-CT-ARZ Part Number

50 7.7 [2.35] 356 [161.6] 15 2010435 15 2010433

60 9.1 [2.78] 410 [186.1] 18 tba† 18 tba

70 10.5 [3.20] 473 [214.7] 21 tba 21 tba

80 11.9 [3.63] 532 [241.5] 24 2010436 24 2010434

90 13.3 [4.06] 599 [271.9] 27 tba 27 tba

100 14.7 [4.48] 658 [298.7] 30 tba 30 2010446

110 16.1 [4.91] 716 [325.1] 33 tba 33 tba

120 17.5 [5.34] 774 [351.4] 37 tba 37 tba

130 18.9 [5.76] 833 [378.2] 40 tba 40 tba

140 20.3 [6.19] 891 [404.5] 43 tba 43 tba

150 21.7 [6.62] 949 [430.8] 46 tba 46 tba† To be assigned

H15500N Pump

562 Series, Min. Casing Size 7-in [177.8-mm] OD

ES Carbon Steel ARZ Carbon Steel

HousingLength, ft [m]

Weight, lbm [kg]

Max. Stages

C-LT-ES Part Number

Max. Stages

C-LT-ARZ Part Number

50 7.7 [2.35] 356 [161.6] 15 2010431 15 2010429

60 9.1 [2.78] 410 [186.1] 18 tba† 18 tba

70 10.5 [3.20] 473 [214.7] 21 tba 21 2010461

80 11.9 [3.63] 532 [241.5] 24 2010432 24 2010430

90 13.3 [4.06] 599 [271.9] 27 tba 27 tba

100 14.7 [4.48] 658 [298.7] 30 tba 30 2010447

110 16.1 [4.91] 716 [325.1] 33 tba 33 tba

120 17.5 [5.34] 774 [351.4] 37 tba 37 tba

130 18.9 [5.76] 833 [378.2] 40 tba 40 2010437

140 20.3 [6.19] 891 [404.5] 43 tba 43 tba

150 21.7 [6.62] 949 [430.8] 46 tba 46 tba† To be assigned

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—H Series Pumps 158

Page 161: REDA Electric Submersible Pump Systems

H15500N Pump, 562 Series, Tandem Combinations

Tandem Housing Sections Number

Pump Housing

Number of Stages 80 90 100 110 120 130 140 150

160 48† 2

170 51† 1 1

180 54† 1 1

190 57† 1 1

200 60† 2

210 63† 1 1

220 66† 2

230 70† 1 1

240 74† 2

250 77† 1 1

260 80† 2

270 83† 1 1

280 86† 2‡

290 89† 1‡ 1‡

300 92† 2‡

310 93† 2‡ 1‡

320 96†, § 1‡ 2‡ Note: Stage counts are for FL-CT-ES pumps † Requires use of high-load bearing in protector for compression pumps. ‡ Requires use of high-strength shaft in lowermost pump. § Requires use of high-load bearing in protector for floater pumps.

H15500N Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—H Series Pumps 159

Page 162: REDA Electric Submersible Pump Systems

H15500N Pump

02,500

5,0007,500

10,00012,500

15,00017,500

20,00022,500

100 20 30 40 50 60 70

50 10 15 20 25 30 35

Head(ft)

Capacity (bbl/d)

REDA* ESP H

15500N Pum

p Performance Curve

60 Hz, 3,500 rpm

Curve com

puted for one stage in fluid of 1.00 sg.

Operating range

E�ciency Head

Power

Power

(hp)

706050403020100

E�ciency(%

)

Optimum

operating range 11,000–20,000 bbl/d

Shaft brake-power lim

it Standard

637 hpN

ominal housing diam

eter 5.63 in.

High strength

1,019 hp

Shaft diameter 1.188 in.

Housing burst-pressure limit

Standard 3,000 psi

Shaft cross-sectional area 1.108 in. 2

Buttress

Not applicable

Min. casing size

7.000 in.

Welded

Not applicable

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—H Series Pumps 160

Page 163: REDA Electric Submersible Pump Systems

H15500N Pump

10

20

30

40

50

60

70

0 5,000 10,000 15,000 20,000 25,000 30,000

2.50

5.00

7.50

10.00

12.50

Capacity (bbl/d)

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA* Pump H15500N Performance CurveCurve computed for one stage in fluid of 1.00 sg.

Head(m)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—H Series Pumps 161

Page 164: REDA Electric Submersible Pump Systems

H15500N Pump

5001,000

1,5002,000

2,5003,000

2.50

5.00

7.50

10.00

12.50

15.00

17.50

2.50

5.00

7.50

10.00

12.50

15.00

17.50

0

Head(m

)

70605040302010

Capacity (m3⁄d)

E�ciency(%

)

Optimum

operating range 1,457–2,650 m

3⁄d Shaft brake-pow

er limit

Standard 531 hp

Nom

inal housing diameter

14.30 cm

High strength

849 hp

Shaft diameter 3.016 cm

Housing burst-pressure lim

it Standard

20,685 kPaShaft cross-sectional area

7.145 cm2

Buttress

Not applicable

Min. casing size

17.780 cm

W

elded N

ot applicable

Operating range

E�ciency

Head

Power

00

0

REDA* ESP H

15500N Pum

p Performance Curve

50 Hz, 2,917 rpm

Curve com

puted for one stage in fluid of 1.00 sg.

Power

(hp)

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—H Series Pumps 162

Page 165: REDA Electric Submersible Pump Systems

H15500N PumpREDA* Pump H15500N Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

2.50

5.00

7.50

10.00

12.50

15.00

17.50

20.00

22.50

0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500

2.50

5.00

7.50

10.00

12.50

Capacity (m3/d)

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—H Series Pumps 163

Page 166: REDA Electric Submersible Pump Systems

H22500N Pump

0500

1,0002,000

1,5002,500

3,5004,000

3,0004,500

5.00

2.50

7.50

10.00

15.00

17.50

12.50

Head,m

Power,

hpE

ciency,%

Optimum

operating range 2,650–3,975 m

3⁄d Shaft brake-pow

er limit

Standard 656 hp

Nom

inal housing diameter

5.63 in

High-strength 1,019 hp

Shaft diameter

1.188 in Housing burst-pressure lim

it Standard

3,000 psiShaft cross-sectional area

1.188 in

Buttress N

/A psiM

in. casing size 7.000 in

W

elded N

/A psi

0

5.00

2.50

7.50

10.00

15.00

17.50

12.50

0

Capacity, m3/d

REDA ESP systems

Pump Perform

ance Curve H22500N 50 Hz, 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—H Series Pumps 164

Page 167: REDA Electric Submersible Pump Systems

H22500N Pump

65 Hz

60 Hz

55 Hz

50 Hz

70 Hz

65 Hz

60 Hz

55 Hz

50 Hz

70

60

50

40

30

20

0

Head(ft)

0.70

0.60

0.50

0.40

0.30

0.20

0.10

Power(hp)

0 5,000 10,000 15,000 20,000 25,000 30,000 35,000 40,000

Capacity, bbl/d

REDA ESP systemsPump Performance Curve H225000

Curve computed for one stage in fluid of 1.00 sg

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—H Series Pumps 165

Page 168: REDA Electric Submersible Pump Systems

H22500N Pump

05,000

10,00015,000

20,00025,000

35,00030,000

2010 30 40 60 7050

1.00

3.00

4.00

5.00

6.00

7.00

2.00

Head,(ft)

Power,

hp

40 50 60 70302010

E�ciency,%

Optimum

operating range 20,000–30,000 bpd

Shaft brake-power lim

it Standard

787 hpN

ominal housing diam

eter 5.63 in

High-strength

1,223 hp

Shaft diameter

1.188 in Housing burst-pressure lim

it Standard

N/A psi

Shaft cross-sectional area 1.188 in

Buttress

6,000 psiM

in. casing size 7.000 in

W

elded N

/A psi

00

0

Capacity, bbl/d

REDA ESP systems

Pump Perform

ance Curve H22500N 60 Hz, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—H Series Pumps 166

Page 169: REDA Electric Submersible Pump Systems

H22500N Pump

70 Hz

65 Hz

60 Hz

55 Hz

50 Hz

0 1,000 2,000 3,000 4,000 5,000 6,000

70 Hz

65 Hz

60 Hz

55 Hz

50 Hz

Capacity, bbl/d

REDA ESP systemsPump Performance Curve H22500N

Curve computed for one stage in fluid of 1.00 sg

7.50

5.00

10.00

12.50

17.50

20.00

22.50

15.00

Head,m

2.50

17.50

15.00

12.50

10.00

7.50

5.00

2.50

Power(hp)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—H Series Pumps 167

Page 170: REDA Electric Submersible Pump Systems

675 Series, Min. Casing Size 85⁄8-in [219.1-mm] OD

Carbon Steel ES Carbon Steel ARZ Carbon Steel

HousingLength, ft [m]

Weight, lbm [kg]

Max. Stages

C-CT Part Number

Max. Stages

C-CT-ES Part Number

Max. Stages

C-CT-ARZ Part Number

10 2.7 [0.82] 195 [88.5] 2 tba† 2 tba 2 tba

20 4.1 [1.25] 276 [125.3] 6 tba 6 tba 6 tba

30 5.4 [1.65] 357 [162.1] 9 tba 9 tba 9 100051081

40 6.8 [2.07] 438 [198.9] 13 tba 13 tba 13 tba

50 8.2 [2.50] 519 [235.6] 16 tba 16 tba 16 tba

60 9.6 [2.93] 600 [272.4] 19 tba 19 tba 19 tba

70 10.9 [3.32] 681 [309.2] 23 1307461 23 1307479 23 1307487

80 12.3 [3.75] 762 [345.9] 26 tba 26 tba 26 tba

90 13.7 [4.18] 843 [382.7] 29 tba 29 tba 29 tba

100 15.1 [4.61] 924 [419.5] 33 tba 33 D32468V 33 tba

110 16.4 [5.00] 1,005 [456.3] 36 tba 36 tba 36 tba

120 17.8 [5.43] 1,086 [493.0] 40 tba 40 tba 40 tba

130 19.2 [5.86] 1,167 [529.8] 43 tba 43 tba 43 tba

140 20.6 [6.28] 1,248 [566.6] 47 tba 47 tba 47 tba

150 21.9 [6.68] 1,329 [603.4] 50 tba 50 tba 50 tba† To be assigned

H28000N Pump

675 Series, Min. Casing Size 85⁄8-in [219.1-mm] OD

Carbon Steel ES Carbon Steel ARZ Carbon Steel

HousingLength, ft [m]

Weight, lbm [kg]

Max. Stages

C-LT Part Number

Max. Stages

C-LT-ES Part Number

Max. Stages

C-LT-ARZ Part Number

10 2.9 [0.88] 207 [63.1] 2 tba† 2 tba 2 tba

20 4.3 [1.31] 288 [87.8] 6 tba 6 tba 6 tba

30 5.6 [1.71] 369 [112.6] 9 tba 9 tba 6 tba

40 7.0 [2.14] 450 [137.3] 13 tba 13 tba 13 tba

50 8.4 [2.56] 531 [162.0] 16 tba 16 tba 16 tba

60 9.8 [2.99] 612 [186.7] 19 2006213 19 tba 19 tba

70 11.1 [3.39] 693 [211.4] 23 1307495 23 1307503 23 1307511

80 12.5 [3.81] 774 [236.1] 26 tba 26 tba 26 tba

90 13.9 [4.24] 855 [260.8] 29 tba 29 D32463V 29 tba

100 15.3 [4.67] 936 [285.5] 33 tba 33 tba 33 tba

110 16.6 [5.06] 1,017 [310.2] 36 tba 36 tba 36 tba

120 18.0 [5.49] 1,098 [334.9] 40 tba 40 tba 40 tba

130 19.4 [5.92] 1,179 [359.6] 43 1339050 43 tba 43 tba

140 20.8 [6.34] 1,260 [384.3] 47 tba 47 tba 47 tba

150 22.1 [6.74] 1,341 [409.0] 50 tba 50 tba 50 tba† To be assigned

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—H Series Pumps 168

Page 171: REDA Electric Submersible Pump Systems

H28000N Pump, 562 Series, Tandem Combinations

Tandem Housing Sections Number

Pump Housing

Number of Stages 80 90 100 110 120 130 140 150

160 50 2†

170 53 1† 1†

180 56 2†

190 59 1† 1†

200 62 2† † Note: Stage counts are for C-CT-ES pumps Requires use of high-strength shaft in lowermost pump

H28000N Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—H Series Pumps 169

Page 172: REDA Electric Submersible Pump Systems

H28000N Pump

05,000

10,00015,000

20,00025,000

30,00035,000

40,000

10 20 30 40 50 60

10 20 30 40 50 60

Head(ft)

Power

(hp)

605040302010

Capacity (bbl/d)

E�ciency(%

)

REDA* ESP H

28000N Pum

p Performance Curve

60 Hz, 3,500 rpm

Curve com

puted for one stage in fluid of 1.00 sg.

Operating range

E�ciency

Head

Power

Optimum

operating range 28,000–36,000 bbl/d

Shaft brake-power lim

it Standard

637 hpN

ominal housing diam

eter 5.63 in.

High strength

1,019 hp

Shaft diameter 1.188 in.

Housing burst-pressure limit

Standard 3,000 psi

Shaft cross-sectional area 1.108 in. 2

Buttress

Not applicable

Min. casing size

7.000 in.

Welded

3,600 psi

00

0

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—H Series Pumps 170

Page 173: REDA Electric Submersible Pump Systems

H28000N Pump

10

20

30

40

50

60

70

0 5,000 10,000 15,000 20,000 25,000 30,000 35,000 40,000 45,000

2.50

5.00

7.50

10.00

12.50

15.00

17.50

20.00

22.50

25.00

Capacity (bbl/d)

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA* Pump H28000N Performance CurveCurve computed for one stage in fluid of 1.00 sg.

Head(ft)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—H Series Pumps 171

Page 174: REDA Electric Submersible Pump Systems

H28000N Pump

0500

1,0001,500

2,0002,500

3,0003,500

4,0004,500

5,000

2.50

5.00

7.50

10.00

12.50

15.00

5 10 15 20 25 30

Head(m

)

Power

(hp)

605040302010

Capacity (m3⁄d)

E�ciency(%

)

Optimum

operating range 3,710–4,770 m

3⁄d Shaft brake-pow

er limit

Standard 531 hp

Nom

inal housing diameter

14.30 cm

High strength

849 hp

Shaft diameter 3.02 cm

Housing burst-pressure lim

it Standard

20,685 kPaShaft cross-sectional area

7.15 cm2

Buttress

Not applicable

Min. casing size

17.78 cm

W

elded 24,822 kPa

REDA* ESP H

28000N Pum

p Performance Curve

50 Hz, 2,917 rpm

Curve com

puted for one stage in fluid of 1.00 sg.

Operating range

E�ciency

Head

Power

00

0

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—H Series Pumps 172

Page 175: REDA Electric Submersible Pump Systems

H28000N Pump

2.50

5.00

7.50

10.00

12.50

15.00

17.50

20.00

22.50

0 1,000 2,000 3,000 4,000 5,000 6,000 7,000

2.50

5.00

7.50

10.00

12.50

15.00

17.50

20.00

22.50

25.00

Capacity (m3/d)

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA* Pump H28000N Performance CurveCurve computed for one stage in fluid of 1.00 sg.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—H Series Pumps 173

Page 176: REDA Electric Submersible Pump Systems

675 Series, Min. Casing Size 85⁄8 -in [219.1-mm] OD

Carbon Steel ES Carbon Steel ARZ ZS Carbon SteelHousing Length, ft [m] Weight, lbm [kg] Max. Stages C-CT Part

NumberMax. Stages C-CT-ES Part

NumberMax. Stages C-CT-ARZ-ZS

Part Number10 2.7 [0.82] 195 [88.5] 2 tba† 2 tba 2 tba

20 4.1 [1.25] 276 [125.3] 5 tba 5 tba 5 tba

30 5.4 [1.65] 357 [162.1] 8 2005191 8 tba 8 tba

40 6.8 [2.07] 438 [198.9] 11 1324698 11 tba 11 tba

50 8.2 [2.50] 519 [235.6] 14 tba 14 tba 14 tba

60 9.6 [2.93] 600 [272.4] 17 1315464 17 D315464 17 tba

70 10.9 [3.32] 681 [309.2] 20 tba 20 2000331 20 tba

80 12.3 [3.75] 762 [345.9] 23 1315589 23 tba 23 tba

90 13.7 [4.18] 843 [382.7] 26 tba 26 tba 26 tba

100 15.1 [4.61] 924 [419.5] 29 tba 29 tba 29 tba

110 16.4 [5.00] 1,005 [456.3] 32 2005311 32 tba 32 tba

120 17.8 [5.43] 1,086 [493.0] 35 1306901 35 1306927 35 1306935

130 19.2 [5.86] 1,167 [529.8] 38 100034562 38 tba 38 tba

140 20.6 [6.28] 1,248 [566.6] 41 tba 41 2003500 41 tba

150 21.9 [6.68] 1,329 [603.4] 44 tba 44 tba 44 tba† To be assigned

675 Series, Min. Casing Size 85⁄8-in [219.1-mm] OD

Carbon Steel ES Carbon Steel ARZ ZS Carbon SteelHousing Length, ft [m] Weight, lbm [kg] Max. Stages C-CT Part

NumberMax. Stages C-CT-ES Part

NumberMax. Stages C-CT-ARZ-ZS

Part Number10 2.9 [0.88] 207 [63.1] 2 tba† 2 tba 2 tba

20 4.3 [1.31] 288 [87.8] 5 tba 5 tba 5 tba

30 5.6 [1.71] 369 [112.6] 8 tba 8 tba 8 tba

40 7.0 [2.14] 450 [137.3] 11 tba 11 tba 11 tba

50 8.4 [2.56] 531 [162.0] 14 tba 14 2003596 14 tba

60 9.8 [2.99] 612 [186.7] 17 1344654 17 D344654 17 tba

70 11.1 [3.39] 693 [211.4] 20 tba 20 tba 20 tba

80 12.5 [3.81] 774 [236.1] 23 1324664 23 tba 23 tba

90 13.9 [4.24] 855 [260.8] 26 tba 26 tba 26 tba

100 15.3 [4.67] 936 [285.5] 29 tba 29 tba 29 tba

110 16.6 [5.06] 1,017 [310.2] 32 1324656 32 tba 32 tba

120 18.0 [5.49] 1,098 [334.9] 35 1306943 35 1306950 35 1306968

130 19.4 [5.92] 1,179 [359.6] 38 1309111 38 tba 38 tba

140 20.8 [6.34] 1,260 [384.3] 41 tba 41 tba 41 tba

150 22.1 [6.74] 1,341 [409.0] 44 tba 44 tba 44 tba† To be assigned

J7000N Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—J Series Pumps 174

Page 177: REDA Electric Submersible Pump Systems

J7000N Pump, 675 Series, Tandem CombinationsTandem Housing Sections Number

Pump Housing Number of Stages 80 90 100 110 120 130 140 150160 52 2

170 55 1 1

180 58 2

190 62 1 1 Note: Stage counts are for C-CT-ES pumps

J7000N Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—J Series Pumps 175

Page 178: REDA Electric Submersible Pump Systems

J7000N Pump

02,500

5,0007,500

10,00012,500

25 50 75

100

125

150

175

5 10 15 20 25 30 35

Head(ft)

70605040302010

Capacity (bbl/d)

E�ciency(%

)

Optimum

operating range 4,500–9,000 bbl/d

Shaft brake-power lim

it Standard

637 hpN

ominal housing diam

eter 6.75 in.

High strength

1,019 hp

Shaft diameter 1.188 in.

Housing burst-pressure limit

Standard N

ot applicableShaft cross-sectional area

1.188 in. 2

Buttress 3,060 psi

Min. casing size

8.625 in.

Welded

3,060 psi

Operating range

E�ciency

Head

Power

00

0

REDA* ESP J7000N

Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

Power

(hp)

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—J Series Pumps 176

Page 179: REDA Electric Submersible Pump Systems

J7000N PumpREDA* Pump J7000N Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

25

50

75

100

125

0 2,500 5,000 7,500 10,000 12,500 15,000

2.50

5.00

7.50

10.00

12.50

Capacity (bbl/d)

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

Head(ft)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—J Series Pumps 177

Page 180: REDA Electric Submersible Pump Systems

J7000N Pump

0250

500750

1,0001,250

1,5001,750

5 10 15 20 25 30 35

2.50

5.00

7.50

10.00

12.50

15.00

17.50

Head(m

)

Capacity (m3⁄d)

Optimum

operating range 596–1,192 m

3⁄d Shaft brake-pow

er limit

Standard 531 hp

Nom

inal housing diameter

17.15 cm

High strength

849 hp

Shaft diameter 3.02 cm

Housing burst-pressure lim

it Standard

Not applicable

Shaft cross-sectional area 7.15 cm

2

Buttress 21,099 kPa

Min. casing size

21.91 cm

W

elded 21,099 kPa

Operating range

E�ciency

Head

Power

Power

(hp)

70605040302010

E�ciency(%

)

00

0

REDA* ESP J7000N

Pump Perform

ance Curve 50 H

z, 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—J Series Pumps 178

Page 181: REDA Electric Submersible Pump Systems

J7000N PumpREDA* Pump J7000N Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

5

10

15

20

25

30

35

40

45

0 250 500 750 1,000 1,250 1,500 1,750 2,000 2,250 2,500

2.50

5.00

7.50

10.00

12.50

Capacity (m3/d)

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—J Series Pumps 179

Page 182: REDA Electric Submersible Pump Systems

J8500N Pump

B.E.P.Q = 8,643H

= 71.97P = 6.23E = 73.59

Optimum

operating range 6,000–11,250 bpd

Shaft brake-power lim

it Standard

637 hpN

ominal housing diam

eter 6.75 in.

High strength

1,019 hp

Shaft diameter

1.188 in. Housing burst-pressure lim

it Standard

N/A psi

Shaft cross-sectional area 1.188 in. 2

Buttress

3,060 psiM

in. casing size 8.625 in.

W

elded N

/A psi

REDA ESP systems

Pump Perform

ance Curve JN8500 60 Hz, 3,500 rpm

675 Series for one stage in fluid of 1.00 sg

02,500

5,0007,500

10,00012,500

15,000

25 50 75

100

125

150

175

2.50

5.00

7.50

10.00

12.50

15.00

17.50

Head(ft)

70605040302010

E�ciency(%

)

00

0

Power

(hp)

Capacity, bbl/d

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—J Series Pumps 180

Page 183: REDA Electric Submersible Pump Systems

675 Series, Min. Casing Size 85⁄8 -in [219.1-mm] OD

Carbon Steel ES Carbon Steel ARZ ZS Carbon SteelHousing Length, ft [m] Weight, lbm [kg] Max. Stages C-CT Part

NumberMax. Stages C-CT-ES Part

NumberMax. Stages C-CT-ARZ-ZS Part

Number10 2.7 [0.82] 195 [88.5] 2 tba† 2 tba 2 tba

20 4.1 [1.25] 276 [125.3] 5 tba 5 tba 5 tba

30 5.4 [1.65] 357 [162.1] 8 tba 8 tba 8 2011896

40 6.8 [2.07] 438 [198.9] 11 tba 11 tba 11 tba

50 8.2 [2.50] 519 [235.6] 14 tba 14 tba 14 tba

60 9.6 [2.93] 600 [272.4] 17 1006857 17 tba 17 2004017

70 0.9 [3.32] 681 [309.2] 20 tba 20 tba 20 tba

80 12.3 [3.75] 762 [345.9] 23 tba 23 tba 23 tba

90 13.7 [4.18] 843 [382.7] 26 2006265 26 tba 26 tba

100 15.1 [4.61] 924 [419.5] 29 1006899 29 tba 29 tba

110 16.4 [5.00] 1,005 [456.3] 32 tba 32 tba 32 tba

120 17.8 [5.43] 1,086 [493.0] 35 tba 35 tba 35 tba

130 19.2 [5.86] 1,167 [529.8] 38 tba 38 100026820 38 tba

140 20.6 [6.28] 1,248 [566.6] 41 tba 41 tba 41 tba

150 21.9 [6.68] 1,329 [603.4] 44 tba 44 tba 44 2003230† To be assigned

675 Series, Min. Casing Size 85⁄8-in [219.1-mm] OD

Carbon Steel ES Carbon Steel ARZ ZS Carbon SteelHousing Length, ft [m] Weight, lbm [kg] Max. Stages C-CT Part

NumberMax. Stages C-CT-ES Part

NumberMax. Stages C-CT-ARZ-ZS Part

Number10 2.9 [0.88] 207 [63.1] 2 tba† 2 tba 2 tba

20 4.3 [1.31] 288 [87.8] 5 tba 5 tba 5 tba

30 5.6 [1.71] 369 [112.6] 8 1007970 8 tba 8 tba

40 7.0 [2.14] 450 [137.3] 11 1007988 11 tba 11 tba

50 8.4 [2.56] 531 [162.0] 14 1007996 14 tba 14 tba

60 9.8 [2.99] 612 [186.7] 17 1008002 17 tba 17 tba

70 11.1 [3.39] 693 [211.4] 20 1008010 20 tba 20 tba

80 12.5 [3.81] 774 [236.1] 23 tba 23 tba 23 tba

90 13.9 [4.24] 855 [260.8] 26 1008036 26 tba 26 tba

100 15.3 [4.67] 936 [285.5] 29 1008044 29 tba 29 tba

110 16.6 [5.06] 1,017 [310.2] 32 1008184 32 tba 32 tba

120 18.0 [5.49] 1,098 [334.9] 35 2005357 35 tba 35 tba

130 19.4 [5.92] 1,179 [359.6] 38 1008200 38 tba 38 tba

140 20.8 [6.34] 1,260 [384.3] 41 1008218 41 100026819 41 tba

150 22.1 [6.74] 1,341 [409.0] 44 1008226 44 tba 44 tba† To be assigned

J12000N Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—J Series Pumps 181

Page 184: REDA Electric Submersible Pump Systems

J12000N Pump, 675 Series, Tandem Combinations

Tandem Housing Sections NumberPump Housing Number of Stages 80 90 100 110 120 130 140 150160 46 2

170 49 1 1

180 52 2

190 55 1† 1†

200 58 2†

210 61 1† 1†

220 64 2† Note: Stage counts are for C-CT-ES pumps † Requires use of high-strength shaft in lowermost pump

J12000N Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—J Series Pumps 182

Page 185: REDA Electric Submersible Pump Systems

J12000N Pump

02,500

5,0007,500

10,00012,500

15,00017,500

20,00022,500

25,000

25 50 75

100

125

150

175

5 10 15 20 25 30 35

Head(ft)

70605040302010

Capacity (bbl/d)

E�ciency(%

)

Optimum

operating range 8,000–18,500 bbl/d

Shaft brake-power lim

it Standard

637 hpN

ominal housing diam

eter 6.75 in.

High strength

1,019 hp

Shaft diameter 1.188 in.

Housing burst-pressure limit

Standard N

ot applicableShaft cross-sectional area

1.108 in. 2

Buttress 3,060 psi

Min. casing size

8.625 in.

Welded

3,060 psi

Operating range

E�ciency

Head

Power

00

0

REDA* ESP J12000N

Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

Power

(hp)

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—J Series Pumps 183

Page 186: REDA Electric Submersible Pump Systems

J12000N PumpREDA* Pump J12000N Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

25

50

75

100

125

0 2,500 5,000 7,500 10,000 12,500 15,000 17,500 20,000 22,500 25,000 27,500

2.50

5.00

7.50

10.00

12.50

15.00

17.50

Capacity (bbl/d)

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

Head(ft)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—J Series Pumps 184

Page 187: REDA Electric Submersible Pump Systems

J12000N Pump

0500

1,0001,500

2,0002,500

3,0003,500

5 10 15 20 25 30 35

2.50

5.00

7.50

10.00

12.50

15.00

17.50

Head(m

)

Capacity (m3⁄d)

Optimum

operating range 1,060–2,451 m

3⁄d Shaft brake-pow

er limit

Standard 531 hp

Nom

inal housing diameter

17.15 cm

High strength

849 hp

Shaft diameter 3.02 cm

Housing burst-pressure lim

it Standard

Not applicable

Shaft cross-sectional area 7.15 cm

2

Buttress 21,099 kPa

Min. casing size

21.91 cm

W

elded 21,099 kPa

Operating range

E�ciency

Head

Power

70605040302010

E�ciency(%

)

00

0

REDA* ESP J12000N

Pump Perform

ance Curve 50 H

z, 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

Power

(hp)

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—J Series Pumps 185

Page 188: REDA Electric Submersible Pump Systems

J12000N PumpREDA* Pump J12000N Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

5

10

15

20

25

30

35

40

45

0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500

2.50

5.00

7.50

10.00

12.50

15.00

17.50

Capacity (m3/d)

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—J Series Pumps 186

Page 189: REDA Electric Submersible Pump Systems

675 Series, Min. Casing Size 85⁄8-in [219.1-mm] OD

ES Carbon Steel ARZ Carbon SteelHousing Length, ft [m] Weight, lbm [kg] Max. Stages C-CT-ES Part Number Max. Stages C-CT-ARZ Part Number10 2.7 [0.82] 195 [88.5] 2 tba† 2 1139765

20 4.1 [1.25] 276 [125.3] 5 tba 5 1139773

30 5.4 [1.65] 357 [162.1] 8 tba 8 1139781

40 6.8 [2.07] 438 [198.9] 11 tba 11 1135185

50 8.2 [2.50] 519 [235.6] 14 tba 14 1135193

60 9.6 [2.93] 600 [272.4] 17 tba 17 1135201

70 10.9 [3.32] 681 [309.2] 20 1006964 20 1135219

80 12.3 [3.75] 762 [345.9] 23 tba 23 1135227

90 13.7 [4.18] 843 [382.7] 26 1006980 26 1135235

100 15.1 [4.61] 924 [419.5] 29 1006998 29 1135243

110 16.4 [5.00] 1,005 [456.3] 32 tba 32 1135250

120 17.8 [5.43] 1,086 [493.0] 35 1007012 35 1135268

130 19.2 [5.86] 1,167 [529.8] 38 tba 38 1135276

140 20.6 [6.28] 1,248 [566.6] 41 tba 41 1135284

150 21.9 [6.68] 1,329 [603.4] 44 tba 44 1135292† To be assigned

675 Series, Min. Casing Size 85⁄8-in [219.1-mm] OD

ES Carbon Steel ARZ Carbon SteelHousing Length, ft [m] Weight, lbm [kg] Max. Stages C-CT-ES Part Number Max. Stages C-CT-ARZ Part Number10 2.9 [0.88] 207 [63.1] 2 tba† 2 1139823

20 4.3 [1.31] 288 [87.8] 5 tba 5 1139831

30 5.6 [1.71] 369 [112.6] 8 1008259 8 1139849

40 7.0 [2.14] 450 [137.3] 11 1008267 11 1135599

50 8.4 [2.56] 531 [162.0] 14 1008275 14 1135607

60 9.8 [2.99] 612 [186.7] 17 1008283 17 1135615

70 11.1 [3.39] 693 [211.4] 20 1008291 20 1135623

80 12.5 [3.81] 774 [236.1] 23 tba 23 1135631

90 13.9 [4.24] 855 [260.8] 26 1008317 26 1135649

100 15.3 [4.67] 936 [285.5] 29 1008325 29 1135656

110 16.6 [5.06] 1,017 [310.2] 32 1008333 32 1135664

120 18.0 [5.49] 1,098 [334.9] 35 1008341 35 1135672

130 19.4 [5.92] 1,179 [359.6] 38 tba 38 1135680

140 20.8 [6.34] 1,260 [384.3] 41 tba 41 1135698

150 22.1 [6.74] 1,341 [409.0] 44 1008374 44 1135706† To be assigned

JN16000 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—J Series Pumps 187

Page 190: REDA Electric Submersible Pump Systems

JN16000 Pump, 675 Series, Tandem Combinations

Tandem Housing Sections NumberPump Housing Number of Stages 80 90 100 110 120 130 140 150160 46 2

170 49 1 1

180 52 2

190 55 1 1

200 58 2†

210 61 1† 1†

220 64 2†

230 67 1† 1†

240 70 2†

250 73 1† 1†

260 76 2†

270 79 1† 1†Note: Stage counts are for C-CT-ES pumps † Requires use of high-strength shaft in lowermost pump

JN16000 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—J Series Pumps 188

Page 191: REDA Electric Submersible Pump Systems

JN16000 Pump

02,500

5,0007,500

10,00012,500

15,00017,500

20,00022,500

25,000

25 50 75

100

125

150

175

5 10 15 20 25 30 35

Head(ft)

70605040302010

Capacity (bbl/d)

E�ciency(%

)

Optimum

operating range 12,800–19,500 bbl/d

Shaft brake-power lim

it Standard

637 hpN

ominal housing diam

eter 6.75 in.

High strength

1,019 hp

Shaft diameter 1.188 in.

Housing burst-pressure limit

Standard N

ot applicableShaft cross-sectional area

1.108 in. 2

Buttress 3,060 psi

Min. casing size

8.625 in.

Welded

3,060 psi

Operating range

E�ciency

Head

Power

00

0

REDA* ESP JN

16000 Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

Power

(hp)

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—J Series Pumps 189

Page 192: REDA Electric Submersible Pump Systems

JN16000 PumpREDA* Pump JN16000 Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

5

10

15

20

25

30

35

0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500

2.50

5.00

7.50

10.00

12.50

15.00

17.50

Capacity (m3/d)

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—J Series Pumps 190

Page 193: REDA Electric Submersible Pump Systems

JN16000 Pump

0500

1,0001,500

2,0002,500

3,0003,500

2.50

5.00

7.50

10.00

12.50

15.00

17.50

2.50

5.00

7.50

10.00

12.50

15.00

17.50

Head(m

)

Capacity (m3⁄d)

Optimum

operating range 1,696–2,584 m

3⁄d Shaft brake-pow

er limit

Standard 531 hp

Nom

inal housing diameter

17.15 cm

High strength

849 hp

Shaft diameter 3.02 cm

Housing burst-pressure lim

it Standard

Not applicable

Shaft cross-sectional area 7.15 cm

2

Buttress 21,099 kPa

Min. casing size

21.91 cm

W

elded 21,099 kPa

Operating range

E�ciency

Head

Power

70605040302010

E�ciency(%

)

00

0

REDA* ESP JN

16000 Pump Perform

ance Curve 50 H

z, 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

Power

(hp)

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—J Series Pumps 191

Page 194: REDA Electric Submersible Pump Systems

JN16000 PumpREDA* Pump JN16000 Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

5

10

15

20

25

30

35

0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500

2.50

5.00

7.50

10.00

12.50

15.00

17.50

Capacity (m3/d)

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—J Series Pumps 192

Page 195: REDA Electric Submersible Pump Systems

725 Series, Min. Casing Size 95⁄8-in [244.5-mm] OD

ES-ZS Carbon Steel ARZ-ZS Carbon SteelHousing Length, ft [m] Weight, lbm [kg] Max. Stages C-CT-ES-ZS Part Number Max. Stages C-CT-ARZ-ZS Part Number10 3.1 [0.95] 224 [68.3] 2 tba† 2 tba

20 4.4 [1.34] 320 [97.6] 4 tba 4 tba

30 5.6 [1.71] 416 [126.9] 7 tba 7 tba

40 6.9 [2.10] 512 [156.2] 9 tba 9 tba

50 8.1 [2.47] 608 [185.4] 12 tba 12 tba

60 9.4 [2.87] 704 [214.7] 14 2004858 14 2004867

70 10.6 [3.23] 800 [244.0] 17 2004859 17 2004868

80 11.9 [3.63] 896 [273.3] 19 2004860 19 2004869

90 13.1 [4.00] 992 [302.6] 22 2004861 22 2004870

100 14.4 [4.39] 1,088 [331.8] 24 2004896 24 2000220

110 15.6 [4.76] 1,184 [361.1] 27 2004862 27 2004871

120 16.9 [5.15] 1,280 [390.4] 29 2004863 29 2004872

130 18.1 [5.52] 1,376 [419.7] 32 2004864 32 2004873

140 19.4 [5.92] 1,472 [449.0] 34 2004865 34 2004874

150 20.6 [6.28] 1,568 [478.2] 37 2004866 37 2004875† To be assigned

725 Series, Min. Casing Size 95⁄8 -in [244.5-mm] OD

ES-ZS Carbon Steel ARZ-ZS Carbon SteelHousing Length, ft [m] Weight, lbm [kg] Max. Stages C-CT-ES-ZS Part Number Max. Stages C-CT-ARZ-ZS Part Number10 3.3 [1.01] 240 [73.2] 2 tba† 2 tba

20 4.6 [1.40] 336 [102.5] 4 tba 4 tba

30 5.8 [1.77] 432 [131.8] 7 tba 7 tba

40 7.1 [2.17] 528 [161.0] 9 tba 9 tba

50 8.3 [2.53] 624 [190.3] 12 tba 12 tba

60 9.6 [2.93] 720 [219.6] 14 2004840 14 2004849

70 10.8 [3.29] 816 [248.9] 17 2004841 17 2004850

80 12.1 [3.69] 912 [278.2] 19 2004842 19 2004851

90 13.3 [4.06] 1,008 [307.4] 22 2004843 22 2004852

100 14.6 [4.45] 1,104 [336.7] 24 tba 24 2004895

110 15.8 [4.82] 1,200 [366.0] 27 2004844 27 2004853

120 17.1 [5.22] 1,296 [395.3] 29 2004845 29 2004854

130 18.3 [5.58] 1,392 [424.6] 32 2004846 32 2004855

140 19.6 [5.98] 1,488 [453.8] 34 2004847 34 2004856

150 20.8 [6.34] 1,584 [483.1] 37 2004848 37 2004857† To be assigned

JN21000 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—J Series Pumps 193

Page 196: REDA Electric Submersible Pump Systems

JN21000 Pump, 675 Series, Tandem Combinations

Tandem Housing Sections NumberPump Housing Number of Stages 80 90 100 110 120 130 140 150

160 46 2

170 49 1 1

180 52 2

190 55 1 1

200 58 2†

210 61 1† 1†

220 64 2†

230 67 1† 1†

240 70 2† Note: Stage counts are for C-CT-ES pumps † Requires use of high-strength shaft in lowermost pump

JN21000 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—J Series Pumps 194

Page 197: REDA Electric Submersible Pump Systems

JN21000 Pump

05,000

10,00015,000

20,00025,000

30,000

25 50 75

100

125

150

5 10 15 20 25 30

Head(ft)

605040302010

Capacity (bbl/d)

E�ciency(%

)

Operating range

E�ciency

Head

Power

Optimum

operating range 16,000–25,000 bbl/d

Shaft brake-power lim

it Standard

637 hpN

ominal housing diam

eter 6.75 in.

High strength

1,019 hp

Shaft diameter 1.188 in.

Housing burst-pressure limit

Standard N

ot applicableShaft cross-sectional area

1.108 in. 2

Buttress 3,060 psi

Min. casing size

8.625 in.

Welded

3,060 psi

00

0

REDA* ESP JN

21000 Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

Power

(hp)

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—J Series Pumps 195

Page 198: REDA Electric Submersible Pump Systems

JN21000 PumpREDA* Pump JN21000 Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

25

50

75

100

125

0 5,000 10,000 15,000 20,000 25,000 30,000 35,000

2.50

5.00

7.50

10.00

12.50

15.00

17.50

Capacity (bbl/d)

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

Head(ft)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—J Series Pumps 196

Page 199: REDA Electric Submersible Pump Systems

JN21000 Pump

0500

1,0001,500

2,0002,500

3,0003,500

4,000

5 10 15 20 25 30

2.50

5.00

7.50

10.00

12.50

15.00

Head(m

)

605040302010

Capacity (m3⁄d)

E�ciency(%

)

Optimum

operating range 2,120–3,312 m

3⁄d Shaft brake-pow

er limit

Standard 531 hp

Nom

inal housing diameter

17.15 cm

High strength

849 hp

Shaft diameter 3.02 cm

Housing burst-pressure lim

it Standard

Not applicable

Shaft cross-sectional area 7.15 cm

2

Buttress 21,099 kPa

Min. casing size

21.91 cm

W

elded 21,099 kPa

Operating range

E�ciency

Head

Power

00

0

REDA* ESP JN

21000 Pump Perform

ance Curve 50 H

z, 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

Power

(hp)

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—J Series Pumps 197

Page 200: REDA Electric Submersible Pump Systems

JN21000 PumpREDA* Pump JN21000 Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

5

10

15

20

25

30

35

0 1,000 2,000 3,000 4,000 5,000 6,000

2.50

5.00

7.50

10.00

12.50

15.00

17.50

Capacity (m3/d)

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—J Series Pumps 198

Page 201: REDA Electric Submersible Pump Systems

725 Series, Min. Casing Size 95⁄8 -in [244.5-mm] OD

ES-ZS Carbon Steel ARZ ZS Carbon SteelHousing Length, ft [m] Weight, lbm [kg] Max. Stages C-CT-ES-ZS Part Number Max. Stages C-CT-ARZ-ZS Part Number10 3.1 [0.95] 224 [68.3] 2 tba† 2 tba

20 4.4 [1.34] 320 [97.6] 4 tba 4 tba

30 5.6 [1.71] 416 [126.9] 7 tba 7 tba

40 6.9 [2.10] 512 [156.2] 9 tba 9 tba

50 8.1 [2.47] 608 [185.4] 12 tba 12 tba

60 9.4 [2.87] 704 [214.7] 14 2004858 14 2004867

70 10.6 [3.23] 800 [244.0] 17 2004859 17 2004868

80 11.9 [3.63] 896 [273.3] 19 2004860 19 2004869

90 13.1 [4.00] 992 [302.6] 22 2004861 22 2004870

100 14.4 [4.39] 1,088 [331.8] 24 2004896 24 2000220

110 15.6 [4.76] 1,184 [361.1] 27 2004862 27 2004871

120 16.9 [5.15] 1,280 [390.4] 29 2004863 29 2004872

130 18.1 [5.52] 1,376 [419.7] 32 2004864 32 2004873

140 19.4 [5.92] 1,472 [449.0] 34 2004865 34 2004874

150 20.6 [6.28] 1,568 [478.2] 37 2004866 37 2004875† To be assigned

725 Series, Min. Casing Size 95⁄8 -in [244.5-mm] OD

ES-ZS Carbon Steel ARZ ZS Carbon SteelHousing Length, ft [m] Weight, lbm [kg] Max. Stages C-CT-ES-ZS Part Number Max. Stages C-CT-ARZ-ZS Part Number10 3.3 [1.01] 240 [73.2] 2 tba† 2 tba

20 4.6 [1.40] 336 [102.5] 4 tba 4 tba

30 5.8 [1.77] 432 [131.8] 7 tba 7 tba

40 7.1 [2.17] 528 [161.0] 9 tba 9 tba

50 8.3 [2.53] 624 [190.3] 12 tba 12 tba

60 9.6 [2.93] 720 [219.6] 14 2004840 14 2004849

70 10.8 [3.29] 816 [248.9] 17 2004841 17 2004850

80 12.1 [3.69] 912 [278.2] 19 2004842 19 2004851

90 13.3 [4.06] 1,008 [307.4] 22 2004843 22 2004852

100 14.6 [4.45] 1,104 [336.7] 24 tba 24 2004895

110 15.8 [4.82] 1,200 [366.0] 27 2004844 27 2004853

120 17.1 [5.22] 1,296 [395.3] 29 2004845 29 2004854

130 18.3 [5.58] 1,392 [424.6] 32 2004846 32 2004855

140 19.6 [5.98] 1,488 [453.8] 34 2004847 34 2004856

150 20.8 [6.34] 1,584 [483.1] 37 2004848 37 2004857† To be assigned

L16000N Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—L Series Pumps 199

Page 202: REDA Electric Submersible Pump Systems

L16000N Pump, 725 Series, Tandem Combinations

Tandem Housing Sections NumberPump Housing Number of Stages 80 90 100 110 120 130 140 150160 38 2†

170 41 1† 1†

180 44 2†

190 46 1† 1†

200 48 2†

210 51 1† 1†

220 54 2†

230 56 1† 1†

240 58 2†

250 61 1† 1† Note: Stage counts are for C-CT-ES pumps † Requires use of high-strength shaft in lowermost pump

L16000N Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—L Series Pumps 200

Page 203: REDA Electric Submersible Pump Systems

L16000N Pump

02,500

5,0007,500

10,00012,500

15,00017,500

20,00022,500

25,000

25 50 75

100

125

150

175

10 20 30 40 50 60 70

Head(ft)

70605040302010

Capacity (bbl/d)

E�ciency(%

)

Optimum

operating range 11,000–20,000 bbl/d

Shaft brake-power lim

it Standard

637 hpN

ominal housing diam

eter 7.25 in.

High strength

1,019 hp

Shaft diameter 1.188 in.

Housing burst-pressure limit

Standard N

ot applicableShaft cross-sectional area

1.108 in. 2

Buttress 3.500 psi

Min. casing size

9.625 in.

Welded

3,500 psi

Operating range

E�ciency

Head

Power

00

0

REDA* ESP L16000N

Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

Power

(hp)

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—L Series Pumps 201

Page 204: REDA Electric Submersible Pump Systems

L16000N PumpREDA* Pump L16000N Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

25

50

75

100

125

150

0 5,000 10,000 15,000 20,000 25,000 30,000

5

10

15

20

25

Capacity (bbl/d)

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

Head(ft)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—L Series Pumps 202

Page 205: REDA Electric Submersible Pump Systems

L16000N Pump

0500

1,0001,500

2,0002,500

3,0003,500

5 10 15 20 25 30 35

5 10 15 20 25 30 35

Head(m

)

Capacity (m3⁄d)

Optimum

operating range 1,497–2,650 m

3⁄d Shaft brake-pow

er limit

Standard 531 hp

Nom

inal housing diameter

18.42 cm

High strength

849 hp

Shaft diameter 3.02 cm

Housing burst-pressure lim

it Standard

Not applicable

Shaft cross-sectional area 7.15 cm

2

Buttress 24,133 kPa

Min. casing size

24.45 cm

W

elded 24,133 kPa

Operating range

E�ciency

Head

Power

Power

(hp)

70605040302010

E�ciency(%

)

00

0

REDA* ESP L16000N

Pump Perform

ance Curve 50 H

z, 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—L Series Pumps 203

Page 206: REDA Electric Submersible Pump Systems

L16000N PumpREDA* Pump L16000N Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

5

10

15

20

25

30

35

40

45

0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000

5

10

15

20

25

Capacity (m3/d)

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—L Series Pumps 204

Page 207: REDA Electric Submersible Pump Systems

862 Series, Min. Casing Size 103⁄4-in [273.1-mm] OD

Carbon Steel C-LT ES Carbon Steel C-LT-ESHousing Length, ft [m] Weight, lbm [kg] Max. Stages “A” Cut Part Number “B” Cut Part Number “A” Cut Part Number “B” Cut Part Number2M 3.9 [1.2] 340 [154] 2 1111277 tba† tba tba

3M 4.5 [1.4] 411 [187] 3 1111285 1111186 tba tba

4M 5.1 [1.6] 471 [214] 4 1111293 1111194 tba tba

5M 5.7 [1.7] 524 [238] 5 1111301 tba tba tba

6M 6.3 [1.9] 613 [278] 6 1111319 1111202 tba tba

7M 6.9 [2.1] 673 [306] 7 1111327 1111210 tba tba

8M 7.5 [2.3] 747 [339] 8 1111335 tba tba tba

9M 8.1 [2.5] 814 [370] 9 1111343 tba tba tba

10M 8.7 [2.7] 874 [397] 10 1111350 1111228 tba tba

11M 9.3 [2.8] 942 [428] 11 1111368 tba tba tba

12M 9.9 [3.0] 1,009 [458] 12 1111376 tba tba tba

13M 10.5 [3.2] 1,076 [489] 13 1111384 tba tba tba

14M 11.1 [3.4] 1,143 [519] 14 1111392 1111236 tba tba

15M 11.7 [3.6] 1,211 [550] 15 1111400 1111533 tba tba

16M 12.3 [3.8] 1,278 [580] 16 1111418 tba tba tba

17M 12.9 [3.9] 1,349 [612] 17 1111426 tba 1299361 tba

18M 13.5 [4.1] 1,416 [643] 18 1111434 1111244 tba tba

19M 14.1 [4.3] 1,480 [672] 19 1111442 tba tba tba

20M 14.8 [4.5] 1,547 [702] 20 1111459 1111251 tba tba

21M 15.4 [4.7] 1,618 [735] 21 1111467 tba tba tba

22M 16.0 [4.9] 1,685 [765] 22 1111475 1111269 tba tba

23M 16.5 [5.0] 1,749 [794] 23 1111483 tba tba tba

24M 17.2 [5.3] 1,816 [824] 24 1111491 tba tba tba

25M 17.8 [5.4] 1,887 [857] 25 1111509 tba tba tba

26M 18.4 [5.6] 1,954 [887] 26 1111517 tba tba tba

27M 19.0 [5.8] 2,021 [918] 27 1111525 tba tba tba† To be assigned

L43000N Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—L Series Pumps 205

Page 208: REDA Electric Submersible Pump Systems

L43000N Pump, 725 Series, Tandem Combinations

Tandem Housing Sections NumberPump Housing Number of Stages 80 90 100 110 120 130 140 150160 32 2†

170 34 1† 1†

180 36 2†

190 38 1† 1†

200 40‡ 2†

210 42‡ 1† 1†

220 44‡ 2†

230 46‡ 1† 1†

240 48‡ 2† Note: Stage counts are for C-CT-ES pumps † Requires use of high-strength shaft in lowermost pump ‡ Requires use of buttress threads in uppermost pump

L43000N Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—L Series Pumps 206

Page 209: REDA Electric Submersible Pump Systems

L43000N Pump

010,000

20,00030,000

40,00050,000

60,00070,000

25 50 75

100

125

150

175

25 50 75 100

125

150

175

Head(ft)

70605040302010

Capacity (bbl/d)

E�ciency(%

)

Optimum

operating range 36,000–54,000 bb/d

Shaft brake-power lim

it Standard

1,000 hpN

ominal housing diam

eter 7.25 in.

High strength

1,500 hp

Shaft diameter 1.500 in.

Housing burst-pressure limit

Standard 2,000 psi

Shaft cross-sectional area 1.767 in. 2

Buttress

3.500 psiM

in. casing size 9.625 in.

W

elded 3,500 psi

Operating range

E�ciency

Head

Power

00

0

REDA* ESP L43000N

Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

Power

(hp)

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—L Series Pumps 207

Page 210: REDA Electric Submersible Pump Systems

L43000N PumpREDA* Pump L43000N Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

25

50

75

100

125

0 10,000 20,000 30,000 40,000 50,000 60,000 70,000 80,000

10

20

30

40

50

Capacity (bbl/d)

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

Head(ft)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—L Series Pumps 208

Page 211: REDA Electric Submersible Pump Systems

L43000N Pump

01,000

2,0003,000

4,0005,000

6,0007,000

8,0009,000

5 10 15 20 25 30 35

10 20 30 40 50 60 70

Head(m

)

Capacity (m3⁄d)

Optimum

operating range 4,770–7,155 m

3⁄d Shaft brake-pow

er limit

Standard 833 hp

Nom

inal housing diameter

18.42 cm

High strength

1,333 hp

Shaft diameter 3.81 cm

Housing burst-pressure lim

it Standard

13,790 kPaShaft cross-sectional area

11.40 cm2

Buttress

24,133 kPaM

in. casing size 24.45 cm

Welded

24,133 kPa

Operating range

E�ciency

Head

Power

70605040302010

E�ciency(%

)

00

0

REDA* ESP L43000N

Pump Perform

ance Curve 50 H

z, 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

Power

(hp)

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—L Series Pumps 209

Page 212: REDA Electric Submersible Pump Systems

L43000N PumpREDA* Pump L43000N Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

5

10

15

20

25

30

35

40

0 2,500 5,000 7,500 10,000 12,500

10

20

30

40

50

Capacity (m3/d)

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—L Series Pumps 210

Page 213: REDA Electric Submersible Pump Systems

862 Series, Min. Casing Size 103⁄4 -in [273.1-mm] OD

Carbon Steel C-LT ES Carbon Steel C-LT-ESHousing Length, ft [m] Weight, lbm [kg] Max. Stages “A” Cut Part Number “B” Cut Part Number “A” Cut Part Number “B” Cut Part Number2M 3.9 [1.2] 340 [154] 2 1111277 tba† tba tba

3M 4.5 [1.4] 411 [187] 3 1111285 1111186 tba tba

4M 5.1 [1.6] 471 [214] 4 1111293 1111194 tba tba

5M 5.7 [1.7] 524 [238] 5 1111301 tba tba tba

6M 6.3 [1.9] 613 [278] 6 1111319 1111202 tba tba

7M 6.9 [2.1] 673 [306] 7 1111327 1111210 tba tba

8M 7.5 [2.3] 747 [339] 8 1111335 tba tba tba

9M 8.1 [2.5] 814 [370] 9 1111343 tba tba tba

10M 8.7 [2.7] 874 [397] 10 1111350 1111228 tba tba

11M 9.3 [2.8] 942 [428] 11 1111368 tba tba tba

12M 9.9 [3.0] 1,009 [458] 12 1111376 tba tba tba

13M 10.5 [3.2] 1,076 [489] 13 1111384 tba tba tba

14M 11.1 [3.4] 1,143 [519] 14 1111392 1111236 tba tba

15M 11.7 [3.6] 1,211 [550] 15 1111400 1111533 tba tba

16M 12.3 [3.8] 1,278 [580] 16 1111418 tba tba tba

17M 12.9 [3.9] 1,349 [612] 17 1111426 tba 1299361 tba

18M 13.5 [4.1] 1,416 [643] 18 1111434 1111244 tba tba

19M 14.1 [4.3] 1,480 [672] 19 1111442 tba tba tba

20M 14.8 [4.5] 1,547 [702] 20 1111459 1111251 tba tba

21M 15.4 [4.7] 1,618 [735] 21 1111467 tba tba tba

22M 16.0 [4.9] 1,685 [765] 22 1111475 1111269 tba tba

23M 16.5 [5.0] 1,749 [794] 23 1111483 tba tba tba

24M 17.2 [5.3] 1,816 [824] 24 1111491 tba tba tba

25M 17.8 [5.4] 1,887 [857] 25 1111509 tba tba tba

26M 18.4 [5.6] 1,954 [887] 26 1111517 tba tba tba

27M 19.0 [5.8] 2,021 [918] 27 1111525 tba tba tba† To be assigned

M520 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—M Series Pumps 211

Page 214: REDA Electric Submersible Pump Systems

862 Series, Min. Casing Size 103⁄4-in [273.1-mm] OD

Carbon Steel C-CT ES Carbon Steel C-CT-ESHousing Length, ft [m] Weight, lbm [kg] Max. Stages “A” Cut Part Number “B” Cut Part Number “A” Cut Part Number “B” Cut Part Number2M 2.5 [0.8] 271 [123] 2 1139047 1139302 tba† tba

3M 3.1 [1.0] 342 [155] 3 1139054 1139310 tba tba

4M 3.8 [1.2] 402 [183] 4 1139062 1139328 tba tba

5M 4.4 [1.3] 455 [207] 5 1139070 1139336 tba tba

6M 5.0 [1.5] 544 [247] 6 1139088 1139344 tba tba

7M 5.6 [1.7] 604 [274] 7 1139096 1139351 R139096 tba

8M 6.2 [1.9] 678 [308] 8 1139104 1139369 1237114 tba

9M 6.8 [2.1] 745 [338] 9 1139112 1139377 tba tba

10M 7.4 [2.3] 805 [365] 10 1139120 1139385 tba tba

11M 8.0 [2.4] 873 [396] 11 1139138 1139393 tba tba

12M 8.6 [2.6] 940 [427] 12 1139146 1139401 1200880 tba

13M 9.2 [2.8] 1,007 [457] 13 1139153 1139419 D13915Z tba

14M 9.8 [3.0] 1,074 [488] 14 1139161 1139427 tba tba

15M 10.4 [3.2] 1,142 [518] 15 1139179 1139435 tba tba

16M 11.0 [3.4] 1,209 [549] 16 1139187 1139443 tba tba

17M 11.6 [3.5] 1,280 [581] 17 1139195 1139450 tba tba

18M 12.2 [3.7] 1,347 [612] 18 1139203 1139468 1319946 tba

19M 12.8 [3.9] 1,411 [641] 19 1139211 1139476 tba tba

20M 13.4 [4.1] 1,478 [671] 20 1139229 1139484 tba tba

21M 14.0 [4.3] 1,549 [703] 21 1139237 1139492 tba tba

22M 14.6 [4.5] 1,616 [734] 22 1139245 1139500 2005623 tba

23M 15.2 [4.6] 1,680 [763] 23 1139252 1139518 1200898 tba

24M 15.8 [4.8] 1,747 [793] 24 1139260 1139526 tba tba

25M 16.4 [5.0] 1,818 [825] 25 1139278 1139534 tba tba

26M 17.0 [5.2] 1,885 [856] 26 1139286 1139542 tba tba

27M 17.6 [5.4] 1,952 [886] 27 1139294 1139559 tba tba

28M 18.3 [5.6] 2,019 [917] 28 tba tba tba tba

29M 20.1 [6.1] 2,155 [978] 29 tba tba tba tba

30M 20.7 [6.3] 2,222 [1,009] 30 tba tba tba tba

31M 21.3 [6.5] 2,289 [1,039] 31 tba tba tba tba† To be assigned

M520 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—M Series Pumps 212

Page 215: REDA Electric Submersible Pump Systems

862 Series, Min. Casing Size 103⁄4-in [273.1-mm] OD

ARZ Carbon Steel C-CT-ARZHousing Length, ft [m] Weight, lbm [kg] Max. Stages “A” Cut Part Number “B” Cut Part Number2M 2.5 [0.8] 271 [123] 2 1149467 1136445

3M 3.1 [1.0] 342 [155] 3 1149475 1149723

4M 3.8 [1.2] 402 [183] 4 1149483 1149731

5M 4.4 [1.3] 455 [207] 5 1149491 1336452

6M 5.0 [1.5] 544 [247] 6 1149509 1149749

7M 5.6 [1.7] 604 [274] 7 1149517 1149756

8M 6.2 [1.9] 678 [308] 8 1149525 1336460

9M 6.8 [2.1] 745 [338] 9 1149533 1336478

10M 7.4 [2.3] 805 [365] 10 1149541 1149764

11M 8.0 [2.4] 873 [396] 11 1149558 1336486

12M 8.6 [2.6] 940 [427] 12 1149566 1336494

13M 9.2 [2.8] 1,007 [457] 13 1149574 1336502

14M 9.8 [3.0] 1,074 [488] 14 1149582 1149772

15M 10.4 [3.2] 1,142 [518] 15 1149590 1149780

16M 11.0 [3.4] 1,209 [549] 16 1149608 1336510

17M 11.6 [3.5] 1,280 [581] 17 1149616 1336528

18M 12.2 [3.7] 1,347 [612] 18 1149624 1149798

19M 12.8 [3.9] 1,411 [641] 19 1149632 1336536

20M 13.4 [4.1] 1,478 [671] 20 1149640 1149806

21M 14.0 [4.3] 1,549 [703] 21 1149657 1336544

22M 14.6 [4.5] 1,616 [734] 22 1149665 1149814

23M 15.2 [4.6] 1,680 [763] 23 1149673 1336551

24M 15.8 [4.8] 1,747 [793] 24 1149681 1336569

25M 16.4 [5.0] 1,818 [825] 25 1149699 1336577

26M 17.0 [5.2] 1,885 [856] 26 1149707 1336585

27M 17.6 [5.4] 1,952 [886] 27 1149715 1336593

28M 18.3 [5.6] 2,019 [917] 28 1249606 1336601

29M 20.1 [6.1] 2,155 [978] 29 1336411 1336619

30M 20.7 [6.3] 2,222 [1,009] 30 1277003 tba†

31M 21.3 [6.5] 2,289 [1,039] 31 2006500 tba† To be assigned

M520 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—M Series Pumps 213

Page 216: REDA Electric Submersible Pump Systems

M520 Pump

5,00010,000

15,00020,000

25,00030,000

25 50 75

100

125

150

175

10 20 30 40 50 60 70

0

Head(ft)

70605040302010

Capacity (bbl/d)

E�ciency(%

)

Optimum

operating range 12,000–20,000 bbl/d

Shaft brake-power lim

it Standard

637 hpN

ominal housing diam

eter 8.63 in.

High strength

1,019 hp

Shaft diameter 1.188 in.

Housing burst-pressure limit

Standard 2,000 psi

Shaft cross-sectional area 1.108 in. 2

Buttress

2,400 psiM

in. casing size 10.75 in.

W

elded 2,400 psi

Operating range

E�ciency

Head

Power

00

0

REDA* ESP M

520A Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

Power

(hp)

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—M Series Pumps 214

Page 217: REDA Electric Submersible Pump Systems

M520 PumpREDA* Pump M520A Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

25

50

75

100

125

150

175

0 5,000 10,000 15,000 20,000 25,000 30,000 35,000

5

10

15

20

25

30

Capacity (bbl/d)

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

Head(ft)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—M Series Pumps 215

Page 218: REDA Electric Submersible Pump Systems

M520 Pump

0500

1,0001,500

2,0002,500

3,0003,500

4,000

5 10 15 20 25 30 35

5 10 15 20 25 30 35

Head(m

)

Capacity (m3⁄d)

Optimum

operating range 1,590–3,180 m

3⁄d Shaft brake-pow

er limit

Standard 531 hp

Nom

inal housing diameter

21.92 cm

High strength

849 hp

Shaft diameter 3.02 cm

Housing burst-pressure lim

it Standard

13,790 kPaShaft cross-sectional area

7.15 cm2

Buttress

16,548 kPaM

in. casing size 27.31 cm

Welded

16,548 kPa

Operating rangeE�

ciency

Head

Power

70605040302010

E�ciency(%

)

00

0

REDA* ESP M

520A Pump Perform

ance Curve 50 H

z, 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

Power

(hp)

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—M Series Pumps 216

Page 219: REDA Electric Submersible Pump Systems

M520 PumpREDA* Pump M520A Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

10

20

30

40

50

0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000 5,500

5

10

15

20

25

30

Capacity (m3/d)

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—M Series Pumps 217

Page 220: REDA Electric Submersible Pump Systems

M520 Pump

5,00010,000

15,00020,000

25,00030,000

25 50 75

100

125

150

175

10 20 30 40 50 60 70

0

Head(ft)

70605040302010

Capacity (bbl/d)

E�ciency(%

)

Optimum

operating range 12,000–23,000 bbl/d

Shaft brake-power lim

it Standard

637 hpN

ominal housing diam

eter 8.63 in.

High strength

1,019 hp

Shaft diameter 1.188 in.

Housing burst-pressure limit

Standard 2,000 psi

Shaft cross-sectional area 1.108 in. 2

Buttress

2,400 psiM

in. casing size 10.75 in.

W

elded 2,400 psi

Operating range

E�ciency

Head

Power

00

0

REDA* ESP M

520B Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

Power

(hp)

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—M Series Pumps 218

Page 221: REDA Electric Submersible Pump Systems

M520 PumpREDA* Pump M520B Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

150

125

100

75

50

25

0 5,000 10,000 15,000 20,000 25,000 30,000 35,000

22.5

20.0

17.5

15.0

12.5

10.0

7.5

5.0

2.5

Capacity (bbl/d)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

Head(ft)

Power(hp)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—M Series Pumps 219

Page 222: REDA Electric Submersible Pump Systems

M520 Pump

0500

1,0001,500

2,0002,500

3,0003,500

4,000

5 10 15 20 25 30 35

5 10 15 20 25 30 35

Head(m

)

Capacity (m3⁄d)

Optimum

operating range 1,590–3,047 m

3⁄d Shaft brake-pow

er limit

Standard 531 hp

Nom

inal housing diameter

21.92 cm

High strength

849 hp

Shaft diameter 3.02 cm

Housing burst-pressure lim

it Standard

13,790 kPaShaft cross-sectional area

7.15 cm2

Buttress

16,548 kPaM

in. casing size 27.31 cm

Welded

16,548 kPa

Operating range

E�ciency

Head

Power

70605040302010

E�ciency(%

)

00

0

REDA* ESP M

520B Pump Perform

ance Curve 50 H

z, 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

Power

(hp)

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—M Series Pumps 220

Page 223: REDA Electric Submersible Pump Systems

M520 PumpREDA* Pump M520B Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

50

45

40

35

30

25

20

15

10

5

0 1,000 2,000 3,000 4,000 5,000 6,000

22.5

20.0

17.5

15.0

12.5

10.0

7.5

5.0

2.5

Capacity (m3/d)

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—M Series Pumps 221

Page 224: REDA Electric Submersible Pump Systems

M520 Pump

02,500

5,0007,500

10,00012,500

15,00017,500

20,00022,500

25,000

25 50 75

100

125

150

175

5 10 15 20 25 30 35

Head(ft)

70605040302010

Capacity (bbl/d)

E�ciency(%

)

Optimum

operating range 12,000–22,000 bbl/d

Shaft brake-power lim

it Standard

637 hpN

ominal housing diam

eter 8.63 in.

High strength

1,019 hp

Shaft diameter 1.188 in.

Housing burst-pressure limit

Standard 2,000 psi

Shaft cross-sectional area 1.108 in. 2

Buttress

2,400 psiM

in. casing size 10.75 in.

W

elded 2,400 psi

Operating range

E�ciency

Head

Power

00

0

REDA* ESP M

520C Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

Power

(hp)

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—M Series Pumps 222

Page 225: REDA Electric Submersible Pump Systems

M520 PumpREDA* Pump M520C Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

25

50

75

100

125

0 5,000 10,000 15,000 20,000 25,000 30,000

20.0

17.5

15.0

12.5

10.0

7.5

5.0

2.5

Capacity (bbl/d)

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

Head(ft)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—M Series Pumps 223

Page 226: REDA Electric Submersible Pump Systems

M520 Pump

0500

1,0001,500

2,0002,500

3,0003,500

5 10 15 20 25 30 35

2.5

5.0

7.5

10.0

12.5

15.0

17.5

Head(m

)

Capacity (m3⁄d)

Optimum

operating range 1,590–2,915 m

3⁄d Shaft brake-pow

er limit

Standard 531 hp

Nom

inal housing diameter

21.92 cm

High strength

849 hp

Shaft diameter 3.02 cm

Housing burst-pressure lim

it Standard

13,790 kPaShaft cross-sectional area

7.15 cm2

Buttress

16,548 kPaM

in. casing size 27.31 cm

Welded

16,548 kPa

Operating range

E�ciency

Head

Power

Power

(hp)

70605040302010

E�ciency(%

)

00

0

REDA* ESP M

520C Pump Perform

ance Curve 50 H

z, 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—M Series Pumps 224

Page 227: REDA Electric Submersible Pump Systems

M520 PumpREDA* Pump M520C Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

40

35

30

25

20

15

10

5

0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000

20.0

17.5

15.0

12.5

10.0

7.5

5.0

2.5

Capacity (m3/d)

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—M Series Pumps 225

Page 228: REDA Electric Submersible Pump Systems

862 Series, Min. Casing Size 103⁄4-in [273.1-mm] OD

Carbon Steel C-LT ES Carbon Steel C-LT-ESHousing Number

Length, ft [m]

Weight, lbm [kg]

Max. Stages

“A” Cut Part Number

“B” Cut Part Number

“C” Cut Part Number

“A” Cut Part Number

“B” Cut Part Number

“C” Cut Part Number

2M 3.9 [1.2] 340 [154] 2 1111020 1119775 tba† tba tba tba

3M 4.5 [1.4] 411 [187] 3 1111038 1119783 tba tba tba tba

4M 5.1 [1.6] 471 [214] 4 1111046 tba tba tba tba tba

5M 5.7 [1.7] 524 [238] 5 1111053 tba tba tba tba tba

6M 6.3 [1.9] 613 [278] 6 1111061 tba tba tba tba tba

7M 6.9 [2.1] 673 [306] 7 1111079 tba tba tba tba tba

8M 7.5 [2.3] 747 [339] 8 1111087 tba tba tba tba tba

9M 8.1 [2.5] 814 [370] 9 1111095 1111004 tba tba tba tba

10M 8.7 [2.7] 874 [397] 10 1111103 tba tba tba tba tba

11M 9.3 [2.8] 942 [428] 11 1111111 tba tba tba tba tba

12M 9.9 [3.0] 1,009 [458] 12 1111129 tba tba tba tba tba

13M 10.5 [3.2] 1,076 [489] 13 1111137 1111012 tba tba tba tba

14M 11.1 [3.4] 1,143 [519] 14 1111145 tba tba tba tba tba

15M 11.7 [3.6] 1,211 [550] 15 1111152 tba 1110998 tba tba tba

16M 12.3 [3.8] 1,278 [580] 16 1111160 tba tba tba tba tba

17M 12.9 [3.9] 1,349 [612] 17 1111178 tba tba tba tba tba

18M 13.5 [4.1] 1,416 [643] 18 tba tba tba tba tba tba

19M 14.1 [4.3] 1,480 [672] 19 tba tba tba tba tba tba

20M 14.8 [4.5] 1,547 [702] 20 tba tba tba tba tba tba

21M 15.4 [4.7] 1,618 [735] 21 tba tba tba tba tba tba

22M 16.0 [4.9] 1,685 [765] 22 tba tba tba tba tba tba

23M 16.5 [5.0] 1,749 [794] 23 tba tba tba tba tba tba

24M 17.2 [5.3] 1,816 [824] 24 tba tba tba tba tba tba

25M 17.8 [5.4] 1,887 [857] 25 tba tba tba tba tba tba

26M 18.4 [5.6] 1,954 [887] 26 tba tba tba tba tba tba

27M 19.0 [5.8] 2,021 [918] 27 tba tba tba tba tba tba

28M 19.6 [3.0] 2,088 [948] 28 1119791 tba tba 1119791 tba tba† To be assigned

M675 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—M Series Pumps 226

Page 229: REDA Electric Submersible Pump Systems

862 Series, Min. Casing Size 103⁄4-in [273.1-mm] OD

ARZ Carbon Steel C-CT-ARZHousing Length,

ft [m]Weight, lbm [kg]

Max. Stages

“A” Cut Part Number

“B” Cut Part Number

“C” Cut Part Number

2M 2.5 [0.76] 271 [123.03] 2 1149822 1149996 tba†

3M 3.1 [0.95] 342 [155.27] 3 1149830 1150002 tba

4M 3.8 [1.16] 402 [182.51] 4 1149848 1336742 tba

5M 4.4 [1.34] 455 [206.57] 5 1149855 1336759 tba

6M 5.0 [1.53] 544 [246.98] 6 1149863 1336767 tba

7M 5.6 [1.71] 604 [274.22] 7 1149871 1336775 tba

8M 6.2 [1.89] 678 [307.81] 8 1149889 1336783 tba

9M 6.8 [2.07] 745 [338.23] 9 1149897 1150010 tba

10M 7.4 [2.26] 805 [365.47] 10 1149905 1336791 tba

11M 8.0 [2.44] 873 [396.34] 11 1149913 1336809 tba

12M 8.6 [2.62] 940 [426.76] 12 1149921 1336817 tba

13M 9.2 [2.81] 1,007 [457.18] 13 1149939 1150028 tba

14M 9.8 [2.99] 1,074 [487.60] 14 1149947 1336825 tba

15M 10.4 [3.17] 1,142 [518.47] 15 1149954 1336833 1150036

16M 11.0 [3.36] 1,209 [548.89] 16 1149962 1336841 tba

17M 11.6 [3.54] 1,280 [581.12] 17 1149970 1336858 tba

18M 12.2 [3.72] 1,347 [611.54] 18 1336635 1336866 tba

19M 12.8 [3.90] 1,411 [640.59] 19 1336643 1336874 tba

20M 13.4 [4.09] 1,478 [671.01] 20 1252535 1336882 tba

21M 14.0 [4.27] 1,549 [703.25] 21 1336650 1336890 tba

22M 14.6 [4.45] 1,616 [733.66] 22 1336668 1336908 tba

23M 15.2 [4.64] 1,680 [762.72] 23 1336676 1336916 tba

24M 15.8 [4.82] 1,747 [793.14] 24 1336684 1336924 tba

25M 16.4 [5.00] 1,818 [825.37] 25 1336692 1336932 tba

26M 17.0 [5.19] 1,885 [855.79] 26 1336700 1336940 tba

27M 17.6 [5.37] 1,952 [886.21] 27 1336718 1336957 tba

28M 18.3 [5.58] 2,019 [916.63] 28 1149988 1336965 tba† To be assigned

M675 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—M Series Pumps 227

Page 230: REDA Electric Submersible Pump Systems

862 Series, Min. Casing Size 103⁄4-in [273.1-mm] OD

Carbon Steel C-CT ES Carbon Steel C-CT-ESHousing Length,

ft [m]Weight, lbm [kg]

Max. Stages

“A” Cut Part Number

“B” Cut Part Number

“C” Cut Part Number

“A” Cut Part Number

“B” Cut Part Number

“C” Cut Part Number

2M 2.5 [0.8] 271 [123] 2 1138239 1138502 1138775 tba† tba tba

3M 3.1 [1.0] 342 [155] 3 1138247 1138510 1138783 tba tba tba

4M 3.8 [1.2] 402 [183] 4 1138254 1138528 1138791 tba tba tba

5M 4.4 [1.3] 455 [207] 5 1138262 1138536 1138809 1185024 tba tba

6M 5.0 [1.5] 544 [247] 6 1138270 1138544 1138817 tba tba tba

7M 5.6 [1.7] 604 [274] 7 1138288 1138551 1138825 D13828Z tba tba

8M 6.2 [1.9] 678 [308] 8 1138296 1138569 1138833 tba M13856U tba

9M 6.8 [2.1] 745 [338] 9 1138304 1138577 1138841 tba tba tba

10M 7.4 [2.3] 805 [365] 10 1138312 1138585 1138858 tba tba tba

11M 8.0 [2.4] 873 [396] 11 1138320 1138593 1138866 tba tba tba

12M 8.6 [2.6] 940 [427] 12 1138338 1138601 1138874 tba tba tba

13M 9.2 [2.8] 1,007 [457] 13 1138346 1138619 1138882 tba tba tba

14M 9.8 [3.0] 1,074 [488] 14 1138353 1138627 1138890 tba tba tba

15M 10.4 [3.2] 1,142 [518] 15 1138361 1138635 1138908 D13836Z tba tba

16M 11.0 [3.4] 1,209 [549] 16 1138379 1138643 1138916 D13837Z tba tba

17M 11.6 [3.5] 1,280 [581] 17 1138387 1138650 1138924 tba tba tba

18M 12.2 [3.7] 1,347 [612] 18 1138395 1138668 1138932 tba tba tba

19M 12.8 [3.9] 1,411 [641] 19 1138403 1138676 1138940 tba tba tba

20M 13.4 [4.1] 1,478 [671] 20 1138411 1138684 1138957 tba tba tba

21M 14.0 [4.3] 1,549 [703] 21 1138429 1138692 1138965 tba tba tba

22M 14.6 [4.5] 1,616 [734] 22 1138437 1138700 1138973 tba tba tba

23M 15.2 [4.6] 1,680 [763] 23 1138445 1138718 1138981 tba tba tba

24M 15.8 [4.8] 1,747 [793] 24 1138452 1138726 1138999 tba tba tba

25M 16.4 [5.0] 1,818 [825] 25 1138460 1138734 1139005 tba tba tba

26M 17.0 [5.2] 1,885 [856] 26 1138478 1138742 1139013 tba tba tba

27M 17.6 [5.4] 1,952 [886] 27 1138486 1138759 1139021 tba tba tba

28M 18.3 [5.6] 2,019 [917] 28 1138494 1138767 1139039 tba tba tba† To be assigned

M675 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—M Series Pumps 228

Page 231: REDA Electric Submersible Pump Systems

M675 Pump

05,000

10,00015,000

20,00025,000

30,00035,000

25 50 75

100

125

150

175

25 50 75 100

125

150

175

Head(ft)

706050403020100

Capacity (bbl/d)

E�ciency(%

)

Optimum

operating range 19,000–32,000 bbl/d

Shaft brake-power lim

it Standard

637 hpN

ominal housing diam

eter 8.63 in.

High strength

1,019 hp

Shaft diameter 1.188 in.

Housing burst-pressure limit

Standard 2,000 psi

Shaft cross-sectional area 1.108 in. 2

Buttress

2,400 psiM

in. casing size 10.75 in.

W

elded 2,400 psi

Operating range

E�ciency

Head

Power

0

REDA* ESP M

675A Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

0 Power

(hp)

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—M Series Pumps 229

Page 232: REDA Electric Submersible Pump Systems

M675 PumpREDA* Pump M675A Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

25

50

75

100

125

150

175

200

0 5,000 10,000 15,000 20,000 25,000 30,000 35,000 40,000 45,000

5

10

15

20

25

30

35

40

45

50

Capacity (bbl/d)

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

Head(ft)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—M Series Pumps 230

Page 233: REDA Electric Submersible Pump Systems

M675 Pump

0500

1,0001,500

2,0002,500

3,0003,500

4,0004,500

5,000

5 10 15 20 25 30 35

10 20 30 40 50 60 70

Head(m

)

Capacity (m3⁄d)

Optimum

operating range 2,517–4,306 m

3⁄d Shaft brake-pow

er limit

Standard 531 hp

Nom

inal housing diameter

21.92 cm

High strength

849 hp

Shaft diameter 3.02 cm

Housing burst-pressure lim

it Standard

13,790 kPaShaft cross-sectional area

7.15 cm2

Buttress

16,548 kPaM

in. casing size 27.31 cm

Welded

16,548 kPa

Operating range

E�ciency

Head

Power

70605040302010

E�ciency(%

)

00

0

REDA* ESP M

675A Pump Perform

ance Curve 50 H

z, 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

Power

(hp)

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—M Series Pumps 231

Page 234: REDA Electric Submersible Pump Systems

M675 PumpREDA* Pump M675A Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

10

20

30

40

50

60

0 1,000 2,000 3,000 4,000 5,000 6,000 7,000

5

10

15

20

25

30

35

40

45

50

Capacity (m3/d)

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—M Series Pumps 232

Page 235: REDA Electric Submersible Pump Systems

M675 Pump

05,000

10,00015,000

20,00025,000

30,00035,000

25 50 75

100

125

150

175

10 20 30 40 50 60 70

Head(ft)

706050403020100

Capacity (bbl/d)

E�ciency(%

)

Optimum

operating range 19,000–29,000 bbl/d

Shaft brake-power lim

it Standard

637 hpN

ominal housing diam

eter 8.63 in.

High strength

1,019 hp

Shaft diameter 1.188 in.

Housing burst-pressure limit

Standard 2,000 psi

Shaft cross-sectional area 1.108 in. 2

Buttress

2,400 psiM

in. casing size 10.75 in.

W

elded 2,400 psi

Operating range

E�ciency

Head

Power

0

REDA* ESP M

675B Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

0 Power

(hp)

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—M Series Pumps 233

Page 236: REDA Electric Submersible Pump Systems

M675 PumpREDA* Pump M675B Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

150

125

100

75

50

25

0 5,000 10,000 15,000 20,000 25,000 30,000 35,000 40,000 45,000

40

35

30

25

20

15

10

5

Capacity (bbl/d)

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

Head(ft)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—M Series Pumps 234

Page 237: REDA Electric Submersible Pump Systems

M675 Pump

0500

1,0001,500

2,0002,500

3,0003,500

4,0004,500

5,000

5 10 15 20 25 30 35

10 20 30 40 50 60 70

Head(m

)

Capacity (m3⁄d)

Optimum

operating range 2,517–3,842 m

3⁄d Shaft brake-pow

er limit

Standard 531 hp

Nom

inal housing diameter

21.92 cm

High strength

849 hp

Shaft diameter 3.02 cm

Housing burst-pressure lim

it Standard

13,790 kPaShaft cross-sectional area

7.15 cm2

Buttress

16,548 kPaM

in. casing size 27.31 cm

Welded

16,548 kPa

Operating range

E�ciency

Head

Power

70605040302010

E�ciency(%

)

00

0

REDA* ESP M

675B Pump Perform

ance Curve 50 H

z, 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

Power

(hp)

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—M Series Pumps 235

Page 238: REDA Electric Submersible Pump Systems

M675 PumpREDA* Pump M675B Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

50

45

40

35

30

25

20

15

10

5

0 1,000 2,000 3,000 4,000 5,000 6,000 7,000

40

35

30

25

20

15

10

5

Capacity (m3/d)

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—M Series Pumps 236

Page 239: REDA Electric Submersible Pump Systems

M675 Pump

05,000

10,00015,000

20,00025,000

30,00035,000

25 50 75

100

125

150

175

10 20 30 40 50 60 70

Head(ft)

706050403020100

Capacity (bbl/d)

E�ciency(%

)

Optimum

operating range 19,000–28,000 bbl/d

Shaft brake-power lim

it Standard

637 hpN

ominal housing diam

eter 8.63 in.

High strength

1,019 hp

Shaft diameter 1.188 in.

Housing burst-pressure limit

Standard 2,000 psi

Shaft cross-sectional area 1.108 in. 2

Buttress

2,400 psiM

in. casing size 10.75 in.

W

elded 2,400 psi

Operating range

E�ciency

Head

Power

0

REDA* ESP M

675C Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

0 Power

(hp)

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—M Series Pumps 237

Page 240: REDA Electric Submersible Pump Systems

M675 PumpREDA* Pump M675C Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

125

100

75

50

25

0 5,000 10,000 15,000 20,000 25,000 30,000 35,000 40,000 45,000

35

30

25

20

15

10

5

Capacity (bbl/d)

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

Head(ft)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—M Series Pumps 238

Page 241: REDA Electric Submersible Pump Systems

M675 Pump

0500

1,0001,500

2,0002,500

3,0003,500

4,0004,500

5,000

5 10 15 20 25 30 35

5 10 15 20 25 30 35

Head(m

)

Capacity (m3⁄d)

Optimum

operating range 2,517–3,710 m

3⁄d Shaft brake-pow

er limit

Standard 531 hp

Nom

inal housing diameter

21.92 cm

High strength

849 hp

Shaft diameter 3.02 cm

Housing burst-pressure lim

it Standard

13,790 kPaShaft cross-sectional area

7.15 cm2

Buttress

16,548 kPaM

in. casing size 27.31 cm

Welded

16,548 kPa

Operating range

E�ciency

Head

Power

70605040302010

E�ciency(%

)

00

0

REDA* ESP M

675C Pump Perform

ance Curve 50 H

z, 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

Power

(hp)

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—M Series Pumps 239

Page 242: REDA Electric Submersible Pump Systems

M675 PumpREDA* Pump M675C Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

40

35

30

25

20

15

10

5

0 1,000 2,000 3,000 4,000 5,000 6,000 7,000

35

30

25

20

15

10

5

Capacity (m3/d)

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—M Series Pumps 240

Page 243: REDA Electric Submersible Pump Systems

950 Series, Min. Casing Size 113⁄4-in [298.5-mm] OD

ARZ Carbon Steel C-CT-ARZ

ARZ Carbon Steel C-CT-ARZ

HousingLength, ft [m]

Weight, lbm [kg]

Max. Stages

“A” Cut† Part Number

“A” Cut‡ Part Number

“B” Cut† Part Number

“B” Cut‡ Part Number

1N 3.1 [1.0] 326 [148] 1 tba§ tba tba tba

2N 3.7 [1.1] 402 [183] 2 tba tba tba tba

3N 4.3 [1.3] 477 [217] 3 tba 1199470 tba tba

4N 4.9 [1.5] 554 [252] 4 tba 1199488 tba tba

5N 5.4 [1.7] 627 [285] 5 tba 1199496 tba 2003595

6N 6.0 [1.8] 703 [319] 6 tba 1199504 tba tba

7N 6.6 [2.0] 779 [354] 7 tba 1199512 tba tba

8N 7.2 [2.2] 854 [388] 8 tba 1199520 tba tba

9N 7.8 [2.4] 930 [422] 9 tba tba tba tba

10N 8.4 [2.6] 1,003 [455] 10 tba tba tba tba

11N 8.9 [2.7] 1,079 [490] 11 tba tba tba tba

12N 9.5 [2.9] 1,155 [524] 12 tba tba tba tba

13N 10.1 [3.1] 1,231 [559] 13 tba tba tba tba

14N 10.7 [3.3] 1,307 [593] 14 tba tba tba tba

15N 11.3 [3.5] 1,382 [627] 15 tba tba tba tba

16N 11.9 [3.6] 1,458 [662] 16 tba tba tba tba

17N 12.4 [3.8] 1,534 [696] 17 tba tba tba tba

18N 13.0 [4.0] 1,611 [731] 18 tba tba tba tba

19N 13.6 [4.2] 1,687 [766] 19 tba tba tba tba

20N 14.2 [4.3] 1,763 [800] 20 tba tba tba tba† Single compression pump with integral intake, 738 Series bolt pattern, discharge head with 7-in [177.8-mm] threads. ‡ Single compression pump with integral intake, 950 Series bolt pattern, discharge head with 7-in [177.8-mm] threads. § To be assigned.

N1050 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—N Series Pumps 241

Page 244: REDA Electric Submersible Pump Systems

N1050 Pump

05,000

10,00015,000

20,00025,000

30,00035,000

40,00045,000

50,00055,000 Pow

er(hp)

Capacity (bbl/d)

E�ciency(%

)

REDA* ESP N

1050A Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

Optimum

operating range 24,000–47,500 bbl/d

Shaft brake-power lim

it Standard

1,000 hpN

ominal housing diam

eter 9.50 in.

High strength

1,600 hp

Shaft diameter 1.500 in.

Housing burst-pressure limit

Standard 2,300 psi

Shaft cross-sectional area 1.767 in. 2

Buttress

Not applicable

Min. casing size

11.75 in.

Welded

2,760 psi

500

100

150

200

250

300

350

250 50 75 100

125

150

175

Head(ft)

706050403020100

Operating range

E�ciency

Head

Power

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—N Series Pumps 242

Page 245: REDA Electric Submersible Pump Systems

N1050 PumpREDA* Pump N1050A Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

250

200

150

100

50

0 10,000 20,000 30,000 40,000 50,000 60,000 70,000

90

80

70

60

40

30

20

10

Capacity (bbl/d)

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

Head(ft)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—N Series Pumps 243

Page 246: REDA Electric Submersible Pump Systems

N1050 Pump

01,000

2,0003,000

4,0005,000

6,0007,000

8,000

10 20 30 40 50 60 70

25 50 75 100

125

150

175

Head(m

)

Capacity (m3⁄d)

Optimum

operating range 3,180–6,294 m

3⁄d Shaft brake-pow

er limit

Standard 833 hp

Nom

inal housing diameter

24.13 cm

High strength

1,333 hp

Shaft diameter 3.81 cm

Housing burst-pressure lim

it Standard

15,850 kPaShaft cross-sectional area

11.40 cm2

Buttress

Not applicable

Min. casing size

29.85 cm

W

elded 19,030 kPa

Operating range

E�ciency

Head

Power

70605040302010

E�ciency(%

)

00

0

REDA* ESP N

1050A Pump Perform

ance Curve 50 H

z, 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

Power

(hp)

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—N Series Pumps 244

Page 247: REDA Electric Submersible Pump Systems

N1050 Pump

80

70

60

50

40

30

20

10

0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000 11,000

90

80

70

60

50

40

30

20

10

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

Capacity, m3/d

REDA ESP systemsPump Performance Curve N1050A

Curve computed for one stage in fluid of 1.00 sg

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—N Series Pumps 245

Page 248: REDA Electric Submersible Pump Systems

N1050 Pump

05,000

10,00015,000

20,00025,000

30,00035,000

40,00045,000

50,00055,000 Pow

er(hp)

Capacity (bbl/d)

E�ciency(%

)

REDA* ESP N

1050B Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

Optimum

operating range 24,000–43,000 bbl/d

Shaft brake-power lim

it Standard

1,000 hpN

ominal housing diam

eter 9.50 in.

High strength

1,600 hp

Shaft diameter 1.500 in.

Housing burst-pressure limit

Standard 2,300 psi

Shaft cross-sectional area 1.767 in. 2

Buttress

Not applicable

Min. casing size

11.75 in.

Welded

2,760 psi

250 50 75

100

125

150

175

250 50 75 100

125

150

175

Head(ft)

706050403020100

Power

E�ciency

Head

Operating range

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—N Series Pumps 246

Page 249: REDA Electric Submersible Pump Systems

N1050 PumpREDA* Pump N1050B Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

225

200

175

150

125

100

75

50

25

0 10,000 20,000 30,000 40,000 50,000 60,000 70,000

70

60

40

30

20

10

Capacity (bbl/d)

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

Head(ft)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—N Series Pumps 247

Page 250: REDA Electric Submersible Pump Systems

N1050 Pump

01,000

2,0003,000

4,0005,000

6,0007,000

8,000

5 10 15 20 30 40 70

10 20 30 40 50 60 70

Head(m

)

Capacity (m3⁄d)

Optimum

operating range 3,180–5,697 m

3⁄d Shaft brake-pow

er limit

Standard 833 hp

Nom

inal housing diameter

24.13 cm

High strength

1,333 hp

Shaft diameter 3.81 cm

Housing burst-pressure lim

it Standard

15,850 kPaShaft cross-sectional area

11.40 cm2

Buttress

Not applicable

Min. casing size

29.85 cm

W

elded 19,030 kPa

E�ciency

Head

Power

70605040302010

E�ciency(%

)

00

0

REDA* ESP N

1050B Pump Perform

ance Curve 50 H

z, 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

Power

(hp)

Operating range

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—N Series Pumps 248

Page 251: REDA Electric Submersible Pump Systems

N1050 PumpREDA* Pump N1050B Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

70

60

50

40

30

20

10

0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000 11,000

70

60

50

40

30

20

10

Capacity (m3/d)

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—N Series Pumps 249

Page 252: REDA Electric Submersible Pump Systems

1000 Series, Min. Casing Size 113⁄4-in [298.5-mm] OD

ES Carbon Steel C-CT-ES-ZS

ARZ Carbon Steel C-CT-ARZ-ZS

HousingLength, ft [m]

Weight, lbm [kg]

Max. Stages

“A” Cut Part Number

“B” Cut Part Number

“A” Cut Part Number

“B” Cut Part Number

1N 2.56 [0.78] 528 [240] 1 tba† tba tba tba

2N 3.30 [1.01] 618 [281] 2 tba tba tba tba

3N 4.04 [1.23] 708 [321] 3 2004030 tba 2004033 tba

4N 4.78 [1.46] 798 [362] 4 2004031 tba 2004034 tba

5N 5.52 [1.68] 888 [403] 5 2000653 tba 2000651 tba

6N 6.26 [1.91] 978 [444] 6 tba tba tba tba

7N 7.00 [2.14] 1,068 [485] 7 2004032 tba 2004035 tba

8N 7.74 [2.36] 1,158 [526] 8 tba tba tba tba

9N 8.48 [2.59] 1,248 [567] 9 tba tba tba tba

10N 9.22 [2.81] 1,338 [607] 10 tba tba tba tba

11N 9.96 [3.04] 1,398 [635] 11 tba tba tba tba

12N 9.70 [2.96] 1,488 [676] 12 tba tba tba tba

13N 11.44 [3.49] 1,578 [716] 13 tba tba tba tba

14N 12.18 [3.71] 1,668 [757] 14 tba tba tba tba† To be assigned

1000 Series, Min. Casing Size 113⁄4-in [298.5-mm] OD

ES Carbon Steel C-LT-ES-ZS

ARZ Carbon Steel C-LT-ARZ-ZS

HousingLength, ft [m]

Weight, lbm [kg]

Max. Stages

“A” Cut Part Number

“B” Cut Part Number

“A” Cut Part Number

“B” Cut Part Number

1N 2.56 [0.78] 528 [240] 1 tba† tba tba tba

2N 3.30 [1.01] 618 [281] 2 tba tba tba tba

3N 4.04 [1.23] 708 [321] 3 tba tba tba tba

4N 4.78 [1.46] 798 [362] 4 tba tba tba tba

5N 5.52 [1.68] 888 [403] 5 2000657 tba 2000656 tba

6N 6.26 [1.91] 978 [444] 6 tba tba tba tba

7N 7.00 [2.14] 1,068 [485] 7 tba tba tba tba

8N 7.74 [2.36] 1,158 [526] 8 tba tba tba tba

9N 8.48 [2.59] 1,248 [567] 9 tba tba tba tba

10N 9.22 [2.81] 1,338 [607] 10 tba tba tba tba

11N 9.96 [3.04] 1,398 [635] 11 tba tba tba tba

12N 9.70 [2.96] 1,488 [676] 12 tba tba tba tba

13N 11.44 [3.49] 1,578 [716] 13 tba tba tba tba

14N 12.18 [3.71] 1,668 [757] 14 tba tba tba tba† To be assigned

N1400 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—N Series Pumps 250

Page 253: REDA Electric Submersible Pump Systems

N1400 Pump

010,000

20,00030,000

40,00050,000

60,00070,000

80,000

50

100

150

200

250

300

350

50 100

150

200

250

300

350

Head(ft)

70605040302010

Capacity (bbl/d)

E�ciency(%

)

Optimum

operating range 35,000–64,000 bbl/d

Shaft brake-power lim

it Standard

1,500 hpN

ominal housing diam

eter 10.00 in.

High strength

2,400 hp

Shaft diameter 1.750 in.

Housing burst-pressure limit

Standard 2,300 psi

Shaft cross-sectional area 2.405 in. 2

Buttress

Not applicable

Min. casing size

11.75 in.

Welded

Not applicable

Operating range

E�ciency

Head

Power

00

0

REDA* ESP N

1400A Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

Power

(hp)

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—N Series Pumps 251

Page 254: REDA Electric Submersible Pump Systems

REDA* Pump N1400A Performance CurveCurve computed for one stage in fluid of 1.00 sg.

50

100

150

200

250

300

350

0 10,000 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000

25

50

75

100

125

150

175

Capacity (bbl/d)

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

Head(ft)

N1400 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—N Series Pumps 252

Page 255: REDA Electric Submersible Pump Systems

N1400 Pump

010,000

20,00030,000

40,00050,000

60,00070,000

80,000

50

100

150

200

250

300

350

50 100

150

200

250

300

350

Head(ft)

70605040302010

Capacity (bbl/d)

E�ciency(%

)

Optimum

operating range 35,000–64,000 bbl/d

Shaft brake-power lim

it Standard

1,500 hpN

ominal housing diam

eter 10.00 in.

High strength

2,400 hp

Shaft diameter 1.750 in.

Housing burst-pressure limit

Standard 2,300 psi

Shaft cross-sectional area 2.405 in. 2

Buttress

Not applicable

Min. casing size

11.75 in.

Welded

Not applicable

Operating range

E�ciency

Head

Power

00

0

REDA* ESP N

1400A Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

Power

(hp)

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—N Series Pumps 253

Page 256: REDA Electric Submersible Pump Systems

N1400 PumpREDA* Pump N1400A Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

50

100

150

200

250

300

350

0 10,000 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000

25

50

75

100

125

150

175

Capacity (bbl/d)

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

Head(ft)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—N Series Pumps 254

Page 257: REDA Electric Submersible Pump Systems

N1400 Pump

01,000

2,0003,000

4,0005,000

6,0007,000

8,0009,000

10,000

10 20 30 40 50 60 70

25 50 75 100

125

150

175

Head(m

)

Capacity (m3⁄d)

Optimum

operating range 4,637–8,480 m

3⁄d Shaft brake-pow

er limit

Standard 1,250 hp

Nom

inal housing diameter

25.40 cm

High strength

2,000 hp

Shaft diameter 4.45 cm

Housing burst-pressure lim

it Standard

15,850 kPaShaft cross-sectional area

15.52 cm2

Buttress

Not applicable

Min. casing size

29.85 cm

W

elded N

ot applicable

Operating range

E�ciency

Head

Power

70605040302010

E�ciency(%

)

00

0

REDA* ESP N

1400A Pump Perform

ance Curve 50 H

z, 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

Power

(hp)

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—N Series Pumps 255

Page 258: REDA Electric Submersible Pump Systems

N1400 PumpREDA* Pump N1400A Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

10

20

30

40

50

60

70

80

90

100

0 2,500 5,000 7,500 10,000 12,500 15,000

25

50

75

100

125

150

175

Capacity (m3/d)

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—N Series Pumps 256

Page 259: REDA Electric Submersible Pump Systems

N1400 Pump

010,000

20,00030,000

40,00050,000

60,00070,000

50

100

150

200

250

300

350

50 100

150

200

250

300

350

Head(ft)

706050403020100

Capacity (bbl/d)

E�ciency(%

)

Optimum

operating range 35,000–60,000 bbl/d

Shaft brake-power lim

it Standard

1,500 hpN

ominal housing diam

eter 10.00 in.

High strength

2,400 hp

Shaft diameter 1.750 in.

Housing burst-pressure limit

Standard 2,300 psi

Shaft cross-sectional area 2.405 in. 2

Buttress

Not applicable

Min. casing size

11.75 in.

Welded

Not applicable

Operating range

E�ciency

Head

Power

0

REDA* ESP N

1400B Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

0 Power

(hp)

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—N Series Pumps 257

Page 260: REDA Electric Submersible Pump Systems

N1400 PumpREDA* Pump N1400B Performance Curve

Curve computed for one stage in fluid of 1.00 sg.

300

250

200

150

100

50

0 10,000 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000

150

125

100

75

50

25

Capacity (bbl/d)

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

Head(ft)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—N Series Pumps 258

Page 261: REDA Electric Submersible Pump Systems

1125 Series, Min. Casing Size 135⁄8 -in [346.1-mm] OD

Carbon Steel C-LT ES Carbon Steel C-LT-ESHousing Length, ft [m] Weight, lbm [kg] Max. Stages “A” Cut Part Number “A” Cut Part Number1 3.6 [1.10] 403 [183] 1 2010904 tba†

2 4.4 [1.34] 513 [233] 2 tba tba

3 5.1 [1.56] 623 [283] 3 1267616 tba

4 5.9 [1.80] 733 [333] 4 tba tba

5 6.7 [2.04] 843 [383] 5 1236116 1333574

6 7.4 [2.26] 953 [433] 6 1236124 tba

7 8.2 [2.50] 1,063 [483] 7 1236132 tba

8 9.0 [2.75] 1,173 [533] 8 1345081 tba† To be assigned

P2500A Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—P Series Pumps 259

Page 262: REDA Electric Submersible Pump Systems

P2500A Pump

010,000

20,00030,000

40,00050,000

60,00070,000

80,00090,000

100,000110,000 Pow

er(hp)

Capacity (bbl/d)

E�ciency(%

)

REDA* ESP P2500A Pum

p Performance Curve

60 Hz, 3,500 rpm

Curve com

puted for one stage in fluid of 1.00 sg.

Operating range

E�ciency

Head

Power

Optimum

operating range 53,486–96,001 bbl/d

Shaft brake-power lim

it Standard

1,000 hpN

ominal housing diam

eter 11.25 in.

High strength

1,600 hp

Shaft diameter 1.500 in.

Housing burst-pressure limit

Standard 1,400 psi

Shaft cross-sectional area 1.767 in. 2

Buttress

Not applicable

Min. casing size

13.625 in.

Welded

Not applicable

500

100

150

200

250

300

350

100

0 200

300

400

500

600

700

Head(ft)

706050403020100

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—P Series Pumps 260

Page 263: REDA Electric Submersible Pump Systems

P2500A Pump

0 25,000 50,000 75,000 100,000 125,000

50

100

150

200

250

300

350

400

25

50

75

100

125

150

175

200

225

250

Head(ft)

Power(hp)

Capacity (bbl/d)

REDA* Pump P2500A Performance CurveCurve computed for one stage in fluid of 1.00 sg.

70 Hz

65 Hz

60 Hz

55 Hz

50 Hz

70 Hz

65 Hz

60 Hz

55 Hz

50 Hz

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—P Series Pumps 261

Page 264: REDA Electric Submersible Pump Systems

P2500A Pump

02,500

5,0007,500

10,00012,500

15,000

10 20 30 40 50 60 70

50 100

150

200

250

300

350

Head(m

)

Power

(hp)

70605040302010

Capacity (m3⁄d)

E�ciency(%

)

REDA* ESP P2500A Perform

ance Pump Curve

50 Hz, 2,917 rpm

Curve com

puted for one stage in fluid of 1.00 sg.

Optimum

operating range 7,087–12,720 m

3⁄d Shaft brake-pow

er limit

Standard 833 hp

Nom

inal housing diameter

28.58 cm

High strength

1,333 hp

Shaft diameter 3.81 cm

Housing burst-pressure lim

it Standard

9,653 kPaShaft cross-sectional area

11.40 cm2

Buttress

Not applicable

Min. casing size

34.61 cm

W

elded N

ot applicable

Operating range

E�ciency

Head

Power

00

0

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—P Series Pumps 262

Page 265: REDA Electric Submersible Pump Systems

125

100

75

50

25

0 2,500 5,000 7,500 10,000 12,500 15,000 17,500 20,000

250

225

200

175

150

125

100

75

50

25

Capacity (m3/d)

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA* Pump P2500A Performance CurveCurve computed for one stage in fluid of 1.00 sg.

P2500A Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—P Series Pumps 263

Page 266: REDA Electric Submersible Pump Systems

538 Series, Min. Casing Size 7-in [177.8-mm] OD

Carbon Steel ES Carbon Steel ARZ Carbon SteelHousing Length,

ft [m]Weight, lbm [kg]

Max. Stages

FL-CT Part Number

Max. Stages

FL-CT-ES Part Number

Max. Stages

FL-CT-ARZ Part Number

10 2.1 [0.64] 93 [42.2] 6 tba† 6 tba 5 tba

20 3.5 [1.07] 157 [71.3] 16 1275510 16 tba 13 tba

30 4.9 [1.49] 221 [100.3] 25 tba 25 tba 21 1290352

40 6.3 [1.92] 285 [129.4] 34 1267525 34 tba 28 1290360

50 7.7 [2.35] 349 [158.4] 44 1233667 44 D233667 37 tba

60 9.1 [2.78] 413 [187.5] 53 1233675 53 D233675 45 1261668

70 10.5 [3.20] 477 [216.6] 62 1233683 62 D233683 52 tba

80 11.9 [3.63] 541 [245.6] 71 1233691 71 R233691 61 1240944

90 13.3 [4.06] 605 [274.7] 81 1233709 81 D233709 69 1261684

100 14.7 [4.48] 669 [303.7] 90 1233717 90 D233717 77 1261692

110 16.1 [4.91] 733 [332.8] 99 1233725 99 D233725 85 tba

120 17.5 [5.34] 797 [361.8] 109 1233733 109 D233733 93 tba

130 18.9 [5.76] 861 [390.9] 118 1233741 118 D233741 101 tba

140 20.3 [6.19] 925 [420.0] 127 1233758 127 D233758 109 1261734

150 21.7 [6.62] 989 [449.0] 137 1233766 137 D233766 117 tba† To be assigned

SN3600 Pump, 538 Series, Tandem Combinations

Tandem Housing Sections NumberPump Housing Number of Stages 80 90 100 110 120 130 140160 142† 2‡

170 152† 1‡ 1‡

180 162† 2‡

190 171† 1‡ 1‡

200 180† 2‡

210 189† 1‡ 1‡

220 198† 2‡

230 208† 1‡ 1‡Note: Stage counts are for FL-CT-ES pumps † Requires use of high-load bearing in protector ‡ Requires use of high-strength shaft in lowermost pump

SN2600 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—S Series Pumps 264

Page 267: REDA Electric Submersible Pump Systems

SN2600 Pump

0500

1,0001,500

2,0002,500

3,0003,500

4,000

10 20 30 40 50 60

0.50

1.00

1.50

2.00

2.50

3.00

Head(ft)

Power

(hp)

605040302010

Capacity (bbl/d)

E�ciency(%

)

REDA* ESP SN

2600 Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

Operating range

E�ciency

Head

Power

Optimum

operating range 1,600–3,200 bbl/d

Shaft brake-power lim

it Standard

256 hpN

ominal housing diam

eter 5.38 in.

High strength

410 hp

Shaft diameter 0.875 in.

Housing burst-pressure limit

Standard N

ot applicableShaft cross-sectional area

0.601 in. 2

Buttress 6,000 psi

Min. casing size

7.000 in.

Welded

6,000 psi

00

0

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—S Series Pumps 265

Page 268: REDA Electric Submersible Pump Systems

SN2600 Pump

10

20

30

40

50

60

70

80

0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000

0.25

0.50

0.75

1.00

1.25

1.50

1.75

2.00

2.25

Capacity (bbl/d)

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA* Pump SN2600 Performance CurveCurve computed for one stage in fluid of 1.00 sg.

Head(ft)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—S Series Pumps 266

Page 269: REDA Electric Submersible Pump Systems

SN2600 Pump

050

100150

200250

300350

400450

500550

2.50

5.00

7.50

10.00

12.50

15.00

0.50

1.00

1.50

2.00

2.50

3.00

Head(m

)

Power

(hp)

605040302010

Capacity (m3⁄d)

E�ciency(%

)

Optimum

operating range 212–424 m

3⁄d Shaft brake-pow

er limit

Standard 213 hp

Nom

inal housing diameter

13.67 cm

High strength

342 hp

Shaft diameter 2.22 cm

Housing burst-pressure lim

it Standard

Not applicable

Shaft cross-sectional area 3.88 cm

2

Buttress 41,370 kPa

Min. casing size

17.78 cm

W

elded 41,370 kPa

REDA* ESP SN

2600 Pump Perform

ance Curve 50 H

z, 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

Operating range

E�ciency

Head

Power

00

0

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—S Series Pumps 267

Page 270: REDA Electric Submersible Pump Systems

SN2600 Pump

2.50

5.00

7.50

10.00

12.50

15.00

17.50

20.00

22.50

25.00

0 100 200 300 400 500 600 700 800

0.25

0.50

0.75

1.00

1.25

1.50

1.75

2.00

2.25

Capacity (m3/d)

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA* Pump SN2600 Performance CurveCurve computed for one stage in fluid of 1.00 sg.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—S Series Pumps 268

Page 271: REDA Electric Submersible Pump Systems

538 Series, Min. Casing Size 7-in [177.8-mm] OD

Carbon Steel ES Carbon Steel ARZ Carbon SteelHousing Length,

ft [m]Weight, lbm [kg]

Max. Stages

FL-CT Part Number

Max. Stages

FL-CT-ES Part Number

Max. Stages

FL-CT-ARZ Part Number

10 2.1 [0.64] 93 [42.2] 5 tba† 5 tba 4 tba

20 3.5 [1.07] 157 [71.3] 11 tba 11 tba 10 tba

30 4.9 [1.49] 221 [100.3] 18 tba 18 tba 16 tba

40 6.3 [1.92] 285 [129.4] 25 tba 25 100116107 21 100115942

50 7.7 [2.35] 349 [158.4] 31 tba 31 100116110 28 100115966

60 9.1 [2.78] 413 [187.5] 38 tba 38 100116113 33 100115976

70 10.5 [3.20] 477 [216.6] 44 tba 44 100116205 39 100116005

80 11.9 [3.63] 541 [245.6] 51 tba 51 100116207 45 100116017

90 13.3 [4.06] 605 [274.7] 57 tba 57 100116209 51 100116018

100 14.7 [4.48] 669 [303.7] 64 2010176 64 2010040 57 2010041

110 16.1 [4.91] 733 [332.8] 71 tba 71 100116212 63 100116038

120 17.5 [5.34] 797 [361.8] 77 tba 77 100116220 69 100116043

130 18.9 [5.76] 861 [390.9] 84 tba 84 100116223 75 100116051

140 20.3 [6.19] 925 [420.0] 90 tba 90 100116225 81 100116055

150 21.7 [6.62] 989 [449.0] 97 tba 97 100116226 87 100116065† To be assigned

SN3600 Pump, 538 Series, Tandem Combinations

Tandem Housing Sections NumberPump Housing Number of Stages 60 70 80 90 100 110 120 130160 142† 2‡

170 152† 1‡ 1‡

180 162† 2‡

190 171† 1‡ 1‡

200 180† 2‡

210 189† 1‡ 1‡

220 198† 2‡

230 208† 1‡ 1‡Note: Stage counts are for FL-CT-ES pumps † Requires use of high-load bearing in protector ‡ Requires use of high-strength shaft in lowermost pump

SN3600 Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—S Series Pumps 269

Page 272: REDA Electric Submersible Pump Systems

SN3600 Pump

0500

1,0001,500

2,0002,500

3,0003,500

4,0004,500

5,0005,500 Pow

er(hp)

Capacity (bbl/d)

E�ciency(%

)

REDA* ESP SN

3600 Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

Optimum

operating range 2,400–4,600 bbl/d

Shaft brake-power lim

it Standard

256 hpN

ominal housing diam

eter 5.38 in.

High strength

410 hp

Shaft diameter 0.875 in.

Housing burst-pressure limit

Standard N

ot applicableShaft cross-sectional area

0.601 in. 2

Buttress 6,000 psi

Min. casing size

7.000 in.

Welded

6,000 psi

100 20 30 40 50 60 70

1.00

0 2.00

3.00

4.00

5.00

6.00

7.00

Head(ft)

706050403020100

Head

E�ciency

Power

Operating range

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—S Series Pumps 270

Page 273: REDA Electric Submersible Pump Systems

SN3600 Pump

10

20

30

40

50

60

70

80

0 1,000 2,000 3,000 4,000 5,000 6,000 7,000

0.50

1.00

1.50

2.00

2.50

3.00

Capacity (bbl/d)

Power(hp)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA* Pump SN3600 Performance CurveCurve computed for one stage in fluid of 1.00 sg.

Head(ft)

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—S Series Pumps 271

Page 274: REDA Electric Submersible Pump Systems

SN3600 Pump

0100

200300

400500

600700

800

2.50

5.00

7.50

10.00

12.50

15.00

17.50

0.50

1.00

1.50

2.00

2.50

3.00

3.50

Head(m

)

Capacity (m3⁄d)

Optimum

operating range 318–609 m

3⁄d Shaft brake-pow

er limit

Standard 213 hp

Nom

inal housing diameter

13.67 cm

High strength

342 hp

Shaft diameter 2.22 cm

Housing burst-pressure lim

it Standard

Not applicable

Shaft cross-sectional area 3.88 cm

2

Buttress 41,370 kPa

Min. casing size

17.78 cm

W

elded 41,370 kPa

REDA* ESP SN

3600 Pump Perform

ance Curve 50 H

z, 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

Operating range

E�ciency

Head

Power

Power

(hp)

70605040302010

E�ciency(%

)

00

0

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—S Series Pumps 272

Page 275: REDA Electric Submersible Pump Systems

SN3600 Pump

2.50

5.00

7.50

10.00

12.50

15.00

17.50

20.00

22.50

25.00

0 100 200 300 400 500 600 700 800 900 1,000

0.50

1.00

1.50

2.00

2.50

3.00

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

Capacity, m3/d

REDA ESP systemsPump Performance Curve SN3600

Curve computed for one stage in fluid of 1.00 sg

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—S Series Pumps 273

Page 276: REDA Electric Submersible Pump Systems

S4000N Pump

01,000

2,0003,000

4,0005,000

6,0007,000

10 20 30 40 50 60 70

1.00

0 2.00

3.00

4.00

5.00

6.00

7.00

Head(ft)

Optimum

operating range 1,000–6,000 bpd

Shaft brake-power lim

it Standard

463 hpN

ominal housing diam

eter 5.38 in

High strength

720 hp

Shaft diameter

1.00 in Housing burst-pressure lim

it Standard

N/A psi

Shaft cross-sectional area 0.785 sq. in

Buttress

N/A psi

Min. casing size

7.00 in

Welded

N/A psi

Power

(hp)

70605040302010

E�ciency(%

)00

Capacity, bbl/d

REDA ESP systems

Pump Perform

ance Curve S4000N 60 Hz, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—S Series Pumps 274

Page 277: REDA Electric Submersible Pump Systems

S6000N Pump538 Series, Min. Casing Size 7-in [177.8-mm] OD

Housing Length, ft [m]

Weight, lbm [kg]

ES Carbon Steel ES Redalloy* High-Nickel AlloyMax. Stages FL-CT Part Number Max. Stages FL-CT Part Number

30 4.9 [1.49] 220 [99.9] 15 100308860 15 100309542

40 6.3 [1.92] 284 [128.9] 21 100308872 21 100309544

50 7.7 [2.35] 347 [157.5] 26 100308873 26 100309545

60 9.1 [2.78] 412 [187.0] 32 100308874 32 100309546

70 10.5 [3.20] 473 [214.7] 38 100308876 38 100309547

80 11.9 [3.63] 537 [243.8] 43 100308877 43 100309548

90 13.3 [4.06] 602 [273.3] 49 100308878 49 100309550

100 14.7 [4.48] 665 [301.9] 55 100308879 55 100309551

110 16.1 [4.91] 729 [331.0] 60 100308880 60 100309552

120 17.5 [5.34] 793 [360.0] 66 100308881 66 100309553

130 18.9 [5.76] 857 [389.0] 71 100308882 71 100309554

140 20.4 [6.20] 921 [418.1] 77 100308884 77 100309555

150 21.8 [6.63] 985 [447.2] 83 100308886 83 100309556

538 Series, Min. Casing Size 7-in [177.8-mm] OD

Housing Length, ft [m]

Weight, lbm [kg]

ES Carbon Steel ES Redalloy AlloyMax. Stages CR-CT† Part Number Max. Stages CR-CT† Part Number

30 4.9 [1.49] 220 [99.9] 15 100301480 15 tba‡

40 6.3 [1.92] 284 [128.9] 21 100301494 21 tba

50 7.7 [2.35] 347 [157.5] 26 100301495 26 100302192

60 9.1 [2.78] 412 [187.0] 32 100301496 32 100302193

70 10.5 [3.20] 473 [214.7] 37 100301497 37 100302194

80 11.9 [3.63] 537 [243.8] 43 100301498 43 100302196

90 13.3 [4.06] 602 [273.3] 49 100301499 49 100302197

100 14.7 [4.48] 665 [301.9] 54 100301500 54 100302198

110 16.1 [4.91] 729 [331.0] 60 100301501 60 100302200

120 17.5 [5.34] 793 [360.0] 66 100301502 66 100302201

130 18.9 [5.76] 857 [389.0] 71 100301503 71 100302203

140 20.4 [6.20] 921 [418.1] 77 100301504 77 100302204

150 21.8 [6.63] 985 [447.2] 82 100301505 82 100302205† This factory-shimmed pump type should always be installed with a factory-shimmed coupling. If this pump type is mated with other factory-shimmed equipment, no shimming is required during assembly. Conversely, if this pump type is mated with nonfactory-shimmed equipment, the field-shimming procedures must be followed.

‡ To be assigned

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—S Series Pumps 275

Page 278: REDA Electric Submersible Pump Systems

S6000N Pump538 Series, Min. Casing Size 7-in [177.8-mm] OD

ARZ Carbon Steel ARZ Redalloy AlloyHousing Length, ft [m] Weight, lbm [kg] Max. Stages CR-CT† Part Number Max. Stages CR-CT† Part Number30 4.9 [1.49] 220 [99.9] 15 100304066 15 tba‡

40 6.3 [1.92] 284 [128.9] 20 100304068 20 tba

50 7.7 [2.35] 347 [157.5] 26 100304069 26 100304978

60 9.1 [2.78] 412 [187.0] 31 100304070 31 100304979

70 10.5 [3.20] 473 [214.7] 37 100304071 37 100304980

80 11.9 [3.63] 537 [243.8] 43 100304072 43 100304981

90 13.3 [4.06] 602 [273.3] 48 100304074 48 100304982

100 14.7 [4.48] 665 [301.9] 54 100304075 54 100304984

110 16.1 [4.91] 729 [331.0] 59 100304076 59 100304985

120 17.5 [5.34] 793 [360.0] 65 100304077 65 100304986

130 18.9 [5.76] 857 [389.0] 71 100304079 71 100304987

140 20.4 [6.20] 921 [418.1] 76 100304080 76 100304988

150 21.8 [6.63] 985 [447.2] 82 100304081 82 100304989† This factory-shimmed pump type should always be installed with a factory-shimmed coupling. If this pump type is mated with other factory-shimmed equipment, no shimming is required during assembly. Conversely, if this pump type is mated with nonfactory-shimmed equipment, the field-shimming procedures must be followed.

‡ To be assigned

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—S Series Pumps 276

Page 279: REDA Electric Submersible Pump Systems

01,000

2,0003,000

4,0005,000

6,0007,000

8,0009,000

10,000

10 20 30 40 50 60 70

2.5

5.0

7.5

10.0

12.5

15.0

17.5

Head(ft)

70605040302010

Capacity (B/D)

E�ciency(%

)

Optimum

operating range 3,500–7,800 B/D

Shaft brake-power lim

it Standard

487 hpN

ominal housing diam

eter 5.38 in.

High strength

735 hp

Shaft diameter 1.000 in.

Housing burst-pressure limit

Standard N

ot applicableShaft cross-sectional area

0.785 in. 2

Buttress 6,000 psi

Min. casing size

7.000 in.

Welded

Not applicable

Operating range

E�ciency

Head

Power

00

0

REDA* ESP S6000N

Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

Power

(hp)

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

S6000N Pump

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—S Series Pumps 277

Page 280: REDA Electric Submersible Pump Systems

S6000N Pump

10

20

30

40

50

60

70

80

90

0 2,500 5,000 7,500 10,000 12,500 15,000

0.50

2.00

2.50

3.50

4.50

1.00

1.50

5.00

3.00

4.00

Power,hp

Head,ft

Capacity, bbl/d

REDA* Pump S6000N Performance CurveCurve computed for one stage in �uid of 1.00 sg.

70 Hz

65 Hz

60 Hz

55 Hz

50 Hz

70 Hz

65 Hz

60 Hz

55 Hz

50 Hz

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—S Series Pumps 278

Page 281: REDA Electric Submersible Pump Systems

S6000N Pump

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

0250

500750

1,0001,250

1,500

5.00

2.50

7.50

10.00

15.00

17.50

12.50

1.00

3.00

4.00

5.00

6.00

7.00

2.00

Head,m

Power,

hp

40 50 60 70302010

Capacity, m3⁄d

E�ciency,%

Optimum

operating range 464–1,033 m

3⁄d Shaft brake-pow

er limit

Standard 386 hp

Nom

inal housing diameter

5.38 in

High-strength 600 hp

Shaft diam

eter 1.000 in Housing burst-pressure lim

it Standard

Not applicable

Shaft cross-sectional area 0.785 in

2

Buttress 6,000 psi

Min. casing size

7.000 in

Welded

Not applicable

REDA ESP S6000N

Pump Perform

ance Curve 50 H

z, 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

Operating range

E�ciency

Head

Power

00

0

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—S Series Pumps 279

Page 282: REDA Electric Submersible Pump Systems

S6000N Pump

25

20

15

10

5

0 250 500 750 1,000 1,250 1,500 1,750 2,000

5.00

4.50

4.00

3.50

3.00

2.50

2.00

1.50

1.00

0.50

Capacity (m3/d)

Power(hp)

Head(m)

70 Hz

70 Hz

65 Hz

65 Hz

60 Hz

60 Hz

55 Hz

55 Hz

50 Hz

50 Hz

REDA* Pump S6000N Performance CurveCurve computed for one stage in fluid of 1.00 sg.

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—S Series Pumps 280

Page 283: REDA Electric Submersible Pump Systems

S8000N Pump538 Series, Min. Casing Size 7-in [177.8-mm] OD

ES Carbon SteelHousing Length, ft [m] Weight, lbm [kg] Max. Stages FL-CT ES Part Number30 4.9 [1.49] 220 [100] 15 100401456

40 6.3 [1.92] 284 [129] 20 100441076

50 7.7 [2.35] 347 [158] 26 100441077

60 9.1 [2.77] 412 [187] 31 100441080

70 10.5 [3.20] 473 [215] 37 100441081

80 11.9 [3.63] 537 [244] 42 100441082

90 13.3 [4.05] 602 [274] 48 100441083

100 14.7 [4.48] 665 [302] 53 100441084

110 16.1 [4.91] 729 [331] 59 100441085

120 17.5 [5.34] 793 [360] 64 100441086

130 18.9 [5.76] 857 [390] 70 100441087

140 20.4 [6.22] 921 [419] 75 100441088

150 21.8 [6.65] 985 [448] 81 100441089

538 Series, Min. Casing Size 7-in [177.8-mm] OD

ES Carbon Steel ES Redalloy* High-Nickel Alloy

Housing Length, ft [m] Weight, lbm [kg] Max. Stages CR-CT ES Part Number Max. Stages CR-CT ES Part Number

30 4.9 [1.49] 220 [100] 15 100401489 15 tba†

40 6.3 [1.92] 284 [129] 21 100422706 21 tba

50 7.7 [2.35] 347 [158] 26 100422709 26 tba

60 9.1 [2.77] 412 [187] 32 100422710 32 tba

70 10.5 [3.20] 473 [215] 37 100422711 37 tba

80 11.9 [3.63] 537 [244] 43 100422712 43 tba

90 13.3 [4.05] 602 [274] 49 100422714 49 tba

100 14.7 [4.48] 665 [302] 54 100422716 54 tba

110 16.1 [4.91] 729 [331] 60 100422717 60 tba

120 17.5 [5.34] 793 [360] 66 100422718 66 100401504

130 18.9 [5.76] 857 [390] 71 100422719 71 100422746

140 20.4 [6.22] 921 [419] 77 100422720 77 100422747

150 21.8 [6.65] 985 [448] 82 100422721 82 100422748† To be assigned

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—S Series Pumps 281

Page 284: REDA Electric Submersible Pump Systems

S8000N Pump538 Series, Min. Casing Size 7-in [177.8-mm] OD

Housing Length, ft [m]

Weight, lbm [kg]

ARZ Carbon Steel ARZ Redalloy High-Nickel Alloy

Max. Stages

CR-CT ARZ Part Number

Max. Stages

CR-CT ARZ Part Number

30 4.9 [1.49] 220 [100] 14 100401509 14 100401799

40 6.3 [1.92] 284 [129] 20 100419400 20 100423509

50 7.7 [2.35] 347 [158] 25 100419402 25 100423510

60 9.1 [2.77] 412 [187] 30 100419403 30 100423511

70 10.5 [3.20] 473 [215] 36 100419404 36 100423512

80 11.9 [3.63] 537 [244] 41 100419405 41 100423514

90 13.3 [4.05] 602 [274] 47 100419406 47 100423515

100 14.7 [4.48] 665 [302] 52 100419407 52 100423516

110 16.1 [4.91] 729 [331] 57 100419408 57 100423518

120 17.5 [5.34] 793 [360] 63 100419409 63 100423564

130 18.9 [5.76] 857 [390] 68 100419410 68 100423566

140 20.4 [6.22] 921 [419] 74 100419411 74 100423567

150 21.8 [6.65] 985 [448] 79 100419412 79 100423568

S8000N Pump, 538 Series, Tandem Configurations

Tandem Housing Sections Number

Pump Housing Number of Stages 80 90 100 110 120 130 140 150

160 86 2

170 92 1 1

180 98 2

190 104 1 1

200 110 2

210 115 1 1

220 120 2

230 126 1 1

240 132 2

250 137 1 1

260 142 2

270 148 1 1

280 154 2

290 160 1 1

300 166 2

310 170 2 1

320 175 1 2

330 180 3

340 186 2 1

350 192 1 2

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—S Series Pumps 282

Page 285: REDA Electric Submersible Pump Systems

S8000N Pump

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

02,500

5,0007,500

10,00012,500

10 20 30 40 50 60 70

2.50

5.00

7.50

12.50

17.50

10.00

15.00

Head,ft

Power,

hp

70605040302010

Capacity, bbl/d

E�ciency,%

Optimum

operating range 350–10,500 bbl/d

Shaft brake-power lim

it Standard

463 hpN

ominal housing diam

eter 5.38 in

High-strength

720 hp

Shaft diameter 1.000 in

Housing burst-pressure limit

Standard N

ot applicableShaft cross-sectional area

0.785 in2

Buttress

6,000 psiM

in. casing size 7.000 in

W

elded N

ot applicable

REDA ESP S8000N

Pump Perform

ance Curve 60 H

z, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg.

00

0

Operating range

E�ciency

Head

Power

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—S Series Pumps 283

Page 286: REDA Electric Submersible Pump Systems

S8000N Pump

10

20

30

40

50

60

70

80

0 2,500 5,000 7,500 10,000 12,500 15,000

1.00

2.00

3.00

4.00

5.00

6.00

Power,hp

Head,ft

Capacity, bbl/d

REDA* Pump S8000N Performance CurveCurve computed for one stage in �uid of 1.00 sg.

70 Hz

65 Hz

60 Hz

55 Hz

50 Hz

70 Hz

65 Hz

60 Hz

55 Hz

50 Hz

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—S Series Pumps 284

Page 287: REDA Electric Submersible Pump Systems

S8000N Pump

This engineering performance curve represents nominal performance based on actual multistage testing and certification. All pumps supplied by Schlumberger will be tested and certified to perform within the acceptable limits for head, power, and efficiency as defined in the API Recommended Practice (11S2) for Electric Submersible Pump Testing.

0250

500750

1,0001,250

1,5001,750

2,000

2.50

7.50

5.00

10.00

12.50

17.50

15.00

1.00

2.00

3.00

4.00

5.00

6.00

7.00

Head,m

Power,

hp

70605040302010

Capacity, m3⁄d

E�ciency,%

Optimum

operating range 464–1,391 m

3⁄d Shaft brake-pow

er limit

Standard 386 hp

Nom

inal housing diameter

5.38 in

High-strength 600 hp

Shaft diam

eter 1.000 in Housing burst-pressure lim

it Standard

Not applicable

Shaft cross-sectional area 0.785 in

2

Buttress 6,000 psi

Min. casing size

7.000 in

Welded

Not applicable

REDA* ESP S8000N

Pump Perform

ance Curve 50 H

z, 2,917 rpm

Curve computed for one stage in fluid of 1.00 sg.

00

0

Operating range

E�ciency

Head

Power

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—S Series Pumps 285

Page 288: REDA Electric Submersible Pump Systems

S110000 Pump

02,500

5,0007,500

10,00012,500

15,00017,500

20,000 Power

(hp)E�

ciency(%

)

Optimum

operating range 2,400–4,600 bbl/d

Shaft brake-power lim

it Standard

256 hpN

ominal housing diam

eter 5.38 in.

High strength

410 hp

Shaft diameter

0.875 in. Housing burst-pressure lim

it Standard

N/A psi

Shaft cross-sectional area 0.601 in. 2

Buttress

6,000 psiM

in. casing size 7.000 in.

W

elded 6,000 psi

100 20 30 40 50 60 70

2.50

0 5.00

7.50

10.00

12.50

15.00

17.50

Head(ft)

706050403020100

Capacity, bbl/d

REDA ESP systems

Pump Perform

ance Curve SN3600 60 Hz, 3,500 rpm

Curve computed for one stage in fluid of 1.00 sg

REDA Electric Submersible Pump Systems Technology Catalog | Pump Intakes and Gas-Handling Devices—S Series Pumps 286

Page 289: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA ESP System Cables 287

REDA ESP System Cables

• E – EPDM • T – Tape • B – Braid

• L – Lead • C – Cushion • HL – Heavy Lead

• S – Semicon • R – Round • F – Flat

• LP – Low Profile • HT – High Temperature

Cables Nomenclature Guide

REDA* ESP Cable SpecificationsTemperature Range, degF [degC]

Profile Insulation Barrier Jacket Armor Voltage, kV

REDA MAX* ESP Power CablesETBE-R –40 to 400

[–40 to 204]Round EPDM† Fluoropolymer tape EPDM Galvanized steel ‡ 5

ETBE-F –40 to 400 [–40 to 204]

Flat EPDM Fluoropolymer tape EPDM Galvanized steel‡ 5

EE-R –40 to 400 [–40 to 204]

Round EPDM None EPDM Galvanized steel‡ 5

REDA Lead* Lead-Barrier ESP Power CablesELC-LPF –40 to 400

[–40 to 204]Flat EPDM Lead None Galvanized steel 5

ELC-F –40 to 450 [–40 to 232]

Flat EPDM Lead None Galvanized steel‡ 5

EHLTB-F –40 to 450 [–40 to 232]

Flat EPDM Heavy lead and fluoropolymer tape

None Galvanized steel‡ 5

ELBE-R –40 to 450 [–40 to 232]

Round EPDM Lead EPDM Galvanized steel‡ 5

EHLTB-HT-F –40 to 500 [–40 to 260]

Flat Extreme EPDM

Heavy lead and fluoropolymer tape

None Galvanized steel‡ 5

REDA Subsea* High-Reliability Corrosion-Resistant ESP CableSESLTBE-R –40 to 400

[–40 to 204]Round High-voltage

EPDMLead and fluoropolymer tape

EPDM Double-layer galvanized steel 8

†Ethylene propylene diene monomer ‡MONEL® and stainless steel armor available on request. Other configurations can be manufactured on request.

ETBE-R

ELC-F

EE-R

ELBE-R

SESLTBE-R

ELC-LPF

Page 290: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA ESP System Cables 288

REDA MAX Cable ETBE-RREDA MAX ESP Power Cable ETBE-R SpecificationsPart number and description

L5921047 #4/1 ETBE G5R

101340945 #4/1 ETBE GG5R

L5921027 #2/1 ETBE G5R

100321640 #1/1 ETBE-400 SS5R

101249685 #1/1 ETBE HG5R

Conductor diameter, in 0.2043 0.2043 0.2576 0.2893 0.2893

Conductor configuration Solid Solid Solid Solid Solid

Insulation material EPDM† EPDM EPDM EPDM EPDM

Insulation wall thickness, in 0.090 0.090 0.090 0.090 0.090

Insulation diameter, in 0.384 0.384 0.438 0.469 0.469

Barrier material Fluoropolymer tape Fluoropolymer tape Fluoropolymer tape Fluoropolymer Tape Fluoropolymer tape

Barrier wall thickness, in 0.004 0.004 0.004 0.004 0.004

Barrier diameter, in 0.392 0.392 0.446 0.477 0.477

Jacket material EPDM EPDM EPDM EPDM EPDM

Jacket wall thickness, in 0.060 0.060 0.060 0.060 0.060

Jacket diameter, in 1.018 1.018 1.133 1.201 1.202

Tubing material NA‡ NA NA NA NA

Tubing size NA NA NA NA NA

Ground wire size NA NA NA NA NA

Armor material Galvanized steel Double-layer galvanized steel

Galvanized steel Stainless steel Galvanized steel

Armor width × thickness, in ½ × 0.025 ½ × 0.020 (layer 1) ½ × 0.025 (layer 2)

½ × 0.025 ½ × 0.020 ½ × 0.034

Armored cable diameter, in 1.188 1.300 1.303 1.362 1.392

Weight, lbm/ft 1.245 1.636 1.597 1.724 2.032

Max. conductor resistance IEEE 1018

Min. insulation resistance IEEE 1018†Ethylene propylene diene monomer ‡Not applicable Dimensions are nominal. Other configurations can be manufactured on request.

275

250

225

200

175

150

125

100

75

50

25

0

Oper

atin

g cu

rrent

, A

Bottomhole temperature, degF

0 25 50 75 100 125 150 175 200 225 250 275 300 325 350 375 400

■ #4 /1 AWG† solid ■ #2 /1 AWG solid ■ #1 AWG solid †American Wire Gauge

Page 291: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA ESP System Cables 289

REDA MAX Cable ETBE-FREDA MAX* ESP Power Cable ETBE-F Specifications

Part number and description

100388957 #4 ETBE G5F

101726942 #1/7 C/S ETBE M5F W/ 4/1 GND

100726429 #1/7 C/S ETBE G5F W/ 4/1 GND

L5882227 #2/0-7 ETBE G5F W/ 4/1 GND

L5882228 #2/0-7 ETBE M5F W/ 4/1 GND

Conductor diameter, in 0.2043 0.297 0.297 0.4140 0.4140

Conductor configuration Solid Compact stranded Compact stranded Stranded Stranded

Insulation material EPDM† EPDM EPDM EPDM EPDM

Insulation wall thickness, in 0.090 0.090 0.090 0.090 0.090

Insulation diameter, in 0.384 0.477 0.477 0.594 0.594

Barrier material Fluoropolymer tape Fluoropolymer tape Fluoropolymer tape Fluoropolymer tape Fluoropolymer tape

Barrier wall thickness, in 0.004 0.004 0.004 0.004 0.004

Barrier diameter, in 0.392 0.485 0.485 0.602 0.602

Jacket material EPDM EPDM EPDM EPDM EPDM

Jacket wall thickness, in 0.055 0.055 0.055 0.055 0.055

Jacket dimensions, in 0.518 × 1.414 0.601 × 1.693 0.601 × 1.693 0.728 × 2.044 0.728 × 2.044

Tubing material NA‡ NA NA NA NA

Tubing size NA NA NA NA NA

Ground wire size, AWG§ NA #4 #4 #4 #4

Armor material Galvanized steel MONEL® Galvanized steel Galvanized steel MONEL

Armor width × thickness, in ¾ × 0.020 ½ × 0.020 ¾ × 0.020 ¾ × 0.020 ½ × 0.020

Armored cable dimensions, in 0.648 × 1.515 0.731 × 2.277 0.731 × 2.277 0.858 × 2.648 0.858 × 2.648

Weight, lbm/ft 1.184 1.817 1.970 2.854 2.862

Max. conductor resistance IEEE 1018

Min. insulation resistance IEEE 1018†Ethylene propylene diene monomer ‡Not applicable §American Wire Gauge dimensions are nominal. Other configurations can be manufactured on request.

3753503253002752502252001751501251007550250

Oper

atin

g cu

rrent

, A

Bottomhole temperature, degF

0 25 50 75 100 125 150 175 200 225 250 275 300 325 350 375 400

■ #2/ 0 AWG† compact stranded ■ #1 AWG compact stranded ■ #4 AWG solid †American Wire Gauge

Page 292: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA ESP System Cables 290

REDA MAX* ESP Power Cable EE-R Specifications

Part number and description

L5651047 #4/1 EE G5R

L5651043 #4/1 EE SS5R

100152716 #2/1 EE G5R

100598783 #2/1 EE M5R

101000655 #2/7 C/S EE SS5R

L5653017 #1/7 C/S EE G5R

Conductor diameter, in 0.2043 0.2043 0.2576 0.2576 0.268 0.297

Conductor configuration Solid Solid Solid Solid Compact stranded Compact stranded

Insulation material EPDM† EPDM EPDM EPDM EPDM EPDM

Insulation wall thickness, in 0.090 0.090 0.090 0.090 0.090 0.090

Insulation diameter, in 0.384 0.384 0.438 0.438 0.448 0.477

Barrier material NA‡ NA NA NA NA NA

Barrier wall thickness NA NA NA NA NA NA

Barrier diameter NA NA NA NA NA NA

Jacket material EPDM EPDM EPDM EPDM EPDM EPDM

Jacket wall thickness, in 0.060 0.060 0.060 0.060 0.060 0.060

Jacket diameter, in 0.988 0.988 1.103 1.104 1.125 1.188

Tubing material NA NA NA NA NA NA

Tubing size NA NA NA NA NA NA

Armor material Galvanized steel Stainless steel Galvanized steel MONEL Stainless steel Galvanized steel

Armor width × thickness, in ½ × 0.025 ½ × 0.020 ½ × 0.025 ½ × 0.020 ½ × 0.020 ½ × 0.025

Armored cable diameter, in 1.158 1.148 1.273 1.263 1.285 1.358

Weight, lbm/ft 1.194 1.108 1.542 1.489 1.452 1.765

Max. conductor resistance IEEE 1018

Min. insulation resistance IEEE 1018†Ethylene propylene diene monomer ‡Not applicable Dimensions are nominal. Other configurations can be manufactured on request.

REDA MAX Cable EE-R

275

250

225

200

175

150

125

100

75

50

25

0

Oper

atin

g cu

rrent

, A

Bottomhole temperature, degF

0 25 50 75 100 125 150 175 200 225 250 275 300 325 350 375 400

■ #4 AWG† solid ■ #2 AWG solid ■ #1 AWG solid †American Wire Gauge

Page 293: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA ESP System Cables 291

REDA Lead Cable ELC-LPFREDA Lead* Lead-Barrier ESP Power Cable ELC-LPF Specifications

Part number and description 102929296 #6/1 ELC-LPF G5F

102771071 #4/1 ELC-LPF G5F

102896633 #2/1 ELC-LPF G5F

102979004 #1/1 ELC-LPF G5F

Conductor diameter, in 0.162 0.2043 0.2576 0.2893

Conductor configuration Solid Solid Solid Solid

Insulation material EPDM† EPDM EPDM EPDM

Insulation wall thickness, in 0.065 0.065 0.065 0.065

Insulation diameter, in 0.292 0.334 0.388 0.419

Barrier material Lead Lead Lead Lead

Barrier wall thickness, in 0.025 0.025 0.030 0.030

Barrier diameter, in 0.342 0.384 0.448 0.479

Jacket material NA‡ NA NA NA

Jacket wall thickness NA NA NA NA

Jacket diameter NA NA NA NA

Tubing material NA NA NA NA

Tubing size NA NA NA NA

Ground wire size NA NA NA NA

Armor material Galvanized steel Galvanized steel Galvanized steel Galvanized steel

Armor width × thickness, in ¾ × 0.020 ¾ × 0.020 ¾ × 0.020 ¾ × 0.020

Armored cable dimensions, in 0.495 × 1.249 0.544 × 1.383 0.608 × 1.573 0.632 × 1.661

Weight, lbm/ft 1.085 1.260 1.720 1.962

Max. conductor resistance IEEE 1018

Min. insulation resistance IEEE 1018†Ethylene propylene diene monomer ‡Not applicable Dimensions are nominal. Other configurations can be manufactured on request.

275

250

225

200

175

150

125

100

75

50

25

0

Oper

atin

g cu

rrent

, A

Bottomhole temperature, degF

0 25 50 75 100 125 150 175 200 225 250 275 300 325 350 375 400

■ #6 AWG† solid ■ #4 AWG solid ■ #2 AWG solid ■ #1 AWG solid †American Wire Gauge

Page 294: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA ESP System Cables 292

REDA Lead Cable ELC-FREDA Lead* Lead-Barrier ESP Power Cable ELB-F SpecificationsPart number and description 102836776

#4/1 ELC G5F102929314 #4/1 ELC SS5F

102929311 #2/1 ELC G5F

102838925 #1/1 ELC G5F

102929310 #1/1 ELC M5F

102982268 #1/7 C/S ELC SS5F

Conductor diameter, in 0.2043 0.2043 0.2576 0.2893 0.2893 0.297

Conductor configuration Solid Solid Solid Solid Solid Compact-strand

Insulation material EPDM† EPDM EPDM EPDM EPDM EPDM

Insulation wall thickness, in 0.075 0.075 0.075 0.075 0.075 0.075

Insulation diameter, in 0.354 0.354 0.408 0.439 0.439 0.447

Barrier material Lead Lead Lead Lead Lead Lead

Barrier wall thickness, in 0.040 0.040 0.040 0.040 0.040 0.040

Barrier diameter, in 0.434 0.434 0.488 0.519 0.519 0.527

Jacket material NA‡ NA NA NA NA NA

Jacket wall thickness NA NA NA NA NA NA

Jacket diameter NA NA NA NA NA NA

Tubing material NA NA NA NA NA NA

Tubing size, in NA NA NA NA NA NA

Ground wire size NA NA NA NA NA NA

Armor material Galvanized steel Stainless steel Galvanized steel Galvanized steel MONEL Stainless steel

Armor width × thickness, in ¾ × 0.020 ¾ × 0.020 ¾ × 0.020 ¾ × 0.020 ¾ × 0.015 ¾ × 0.020

Armored cable dimensions, in 0.587 × 1.526 0.587 × 1.526 0.641 × 1.686 0.672 × 1.781 0.645 × 1.761 0.687 × 1.811

Weight, lbm/ft 1.639 1.650 2.028 2.284 2.219 2.219

Max. conductor resistance IEEE 1018

Min. insulation resistance IEEE 1018†Ethylene propylene diene monomer ‡Not applicable Dimensions are nominal. Other configurations can be manufactured on request.

275

250

225

200

175

150

125

100

75

50

25

0

Oper

atin

g cu

rrent

, A

Bottomhole temperature, degF

0 25 50 75 100 125 150 175 200 225 250 275 300 325 350 375 400 425 450

■ #4 AWG† solid ■ #2 AWG solid ■ #1 AWG solid †American Wire Gauge

Page 295: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA ESP System Cables 293

REDA Lead Cable EHLTB-FREDA Lead* Lead-Barrier ESP Power Cable EHLTB-F SpecificationsPart number and description 100927773

#4/1 EHLTB G5F100357995 #2/1 EHLTB G5F

L331321B #1/0-7 C/S EHLTB G5F CII

100917303 #1/0-7 C/S EHLTB M5F

Conductor diameter, in 0.2043 0.2576 0.3370 0.3370

Conductor configuration Solid Solid Compact stranded Compact stranded

Insulation material EPDM† EPDM EPDM EPDM

Insulation wall thickness, in 0.075 0.075 0.075 0.075

Insulation diameter, in 0.354 0.408 0.487 0.487

Barrier material Heavy lead and fluoropolymer tape

Heavy lead and fluoropolymer tape

Heavy lead and fluoropolymer tape

Heavy lead and fluoropolymer tape

Barrier wall thickness, in 0.050 and 0.004 0.050 and 0.004 0.050 and 0.004 0.050 and 0.004

Barrier diameter, in 0.454 and 0.462 0.508 and 0.516 0.587 and 0.595 0.587 and 0.595

Jacket material NA‡ NA NA NA

Jacket wall thickness NA NA NA NA

Jacket diameter NA NA NA NA

Tubing material NA NA NA NA

Tubing size, in NA NA NA NA

Ground wire size NA NA NA NA

Armor material Galvanized steel Galvanized steel Galvanized steel MONEL

Armor width × thickness, in ¾ × 0.020 ¾ × 0.020 ¾ × 0.025 ½ × 0.020

Armored cable dimensions, in 0.578 × 1.485 0.638 × 1.663 0.745 × 1.921 0.717 × 1.901

Weight, lbm/ft 1.812 2.238 3.129 3.035

Max. conductor resistance IEEE 1018

Min. insulation resistance IEEE 1018†Ethylene propylene diene monomer ‡Not applicable Dimensions are nominal. Other configurations can be manufactured on request.

3503253002752502252001751501251007550250

Oper

atin

g cu

rrent

, A

0 25 50 75 100 125 150 175 200 225 250 275 300 325 350 375 400 425 450Bottomhole temperature, degF

■ #4 AWG† solid ■ #2 AWG solid ■ #1/ 0 AWG compact stranded †American Wire Gauge

Page 296: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA ESP System Cables 294

REDA Lead Cable ELBE-RREDA Lead* Lead-Barrier ESP Power Cable ELBE-R SpecificationsPart number and description L3501047

#4/1 ELBE G5RL3501048 #4/1 ELBE M5R

100414563 #4/1 ELBE SS5R

L3503027 #2/7 C/S ELBE G5R

100040036 #1/1 ELBE HG5R

Conductor diameter, in 0.2043 0.2043 0.2043 0.2680 0.2893

Conductor configuration Solid Solid Solid Compact stranded Solid

Insulation material EPDM† EPDM EPDM EPDM EPDM

Insulation wall thickness, in 0.075 0.075 0.075 0.075 0.075

Insulation diameter, in 0.354 0.354 0.354 0.418 0.439

Barrier material Lead Lead Lead Lead Lead

Barrier wall thickness, in 0.040 0.040 0.040 0.040 0.040

Barrier diameter, in 0.434 0.434 0.434 0.498 0.519

Jacket material EPDM EPDM EPDM EPDM EPDM

Jacket wall thickness, in 0.060 0.060 0.060 0.060 0.060

Jacket diameter, in 1.109 1.109 1.109 1.246 1.292

Tubing material NA‡ NA NA NA NA

Tubing size NA NA NA NA NA

Ground wire size NA NA NA NA NA

Armor material Galvanized steel MONEL Stainless steel Galvanized steel Galvanized steel

Armor width × thickness, in ½ × 0.025 ½ × 0.020 ½ × 0.020 ½ × 0.025 ½ × 0.034

Armored cable diameter, in 1.279 1.269 1.269 1.416 1.482

Weight, lbm/ft 2.010 1.957 1.890 2.484 2.484

Max. conductor resistance IEEE 1018

Min. insulation resistance IEEE 1018†Ethylene propylene diene monomer ‡Not applicable Dimensions are nominal. Other configurations can be manufactured on request.

300

275

250

225

200

175

150

125

100

75

50

25

0

Oper

atin

g cu

rrent

, A

0 25 50 75 100 125 150 175 200 225 250 275 300 325 350 375 400 425 450Bottomhole temperature, degF

■ #4 AWG† solid ■ #2 AWG compact stranded ■ #1 AWG solid †American Wire Gauge

Page 297: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA ESP System Cables 295

REDA Lead Cable EHLTB-HT-FREDA Lead* Lead-Barrier ESP Power Cable EHLTB-HT-F SpecificationsPart number and description 101926370

#4/1 EHLTB-HT G5F103139613 #4/1 EHLTB-HT M5F

102872448 #4/1 EHLTB-HT G5F W/ 3/8 Tube

102895578 #4/1 EHLTB-HT G-TUBE-G5F

Conductor diameter, in 0.2043 0.2043 0.2043 0.2043

Conductor configuration Solid Solid Solid Solid

Insulation material Extreme EPDM† Extreme EPDM Extreme EPDM Extreme EPDM

Insulation wall thickness, in 0.075 0.075 0.075 0.075

Insulation diameter, in 0.354 0.354 0.354 0.354

Barrier material Heavy lead and fluoropolymer tape

Barrier wall thickness, in 0.050 and 0.004 0.050 and 0.004 0.050 and 0.004 0.050 and 0.004

Barrier diameter, in 0.454 and 0.462 0.454 0.454 and 0.462 0.454

Jacket material NA‡ NA NA NA

Jacket wall thickness NA NA NA NA

Jacket diameter NA NA NA NA

Tubing material NA NA Stainless steel Stainless steel

Tubing size, in NA NA 0.375 3/8 x 0.049

Ground wire size NA NA NA NA

Armor material Galvanized steel MONEL Galvanized steel Galvanized Steel

Armor width × thickness, in ¾ × 0.020 ¾ × 0.020 ¾ × 0.020 ¾ × 0.020

Armored cable dimensions, in 0.578 × 1.485 0.578 × 1.485 0.578 × 1.920 0.688 × 1.939

Weight, lbm/ft 1.815 1.930 2.365 2.522

Max. conductor resistance IEEE 1018

Min. insulation resistance IEEE 1018†Extreme ethylene propylene diene monomer ‡Not applicable Dimensions are nominal. Other configurations can be manufactured on request.

200

175

150

125

100

75

50

25

0

Oper

atin

g cu

rrent

, A

Bottomhole temperature, degF

0 25 50 75 100 125 150 175 200 225 250 275 300 325 350 375 400 425 450 475 500 525

■ #4 AWG† solid †American Wire Gauge

Page 298: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA ESP System Cables 296

REDA Subsea Cable SESLTBE-RREDA Subsea* High-Reliability Corrosion-Resistant ESP Cable SESLTBE-R SpecificationsPart number and description 101076089

#1/0-7 C/S SESLTBE GG8RConductor diameter, in 0.3370

Conductor configuration Compact stranded

Insulation material Semiconductive layer-EPDM†-Semiconductive layer

Insulation wall thickness, in 0.130

Insulation diameter, in 0.617

Barrier material Lead and fluoropolymer tape

Barrier wall thickness, in 0.040 and 0.004

Barrier diameter, in 0.727 and 0.735

Jacket material EPDM

Jacket wall thickness, in 0.060

Jacket diameter, in 1.757

Tubing material NA‡

Tubing size NA

Ground wire size NA

Armor material Double-layer galvanized steel

Armor width × thickness, in ½ × 0.020 (layer 1) ½ × 0.025 (layer 2)

Armored cable diameter, in 2.039

Weight, lbm/ft 4.762

Max. conductor resistance IEEE 1018

Min. insulation resistance IEEE 1018†Ethylene propylene diene monomer ‡Not applicable Dimensions are nominal. Other configurations can be manufactured on request.

3503253002752502252001751501251007550250

Oper

atin

g cu

rrent

, A

Bottomhole temperature, degF

0 25 50 75 100 125 150 175 200 225 250 275 300 325 350 375 400

■ #1/ 0–7 AWG† compact stranded †American Wire Gauge

Page 299: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | Protectors 298

Chamber TypeL Labyrinth

B Elastomer bag

M Metal bellows

66L Two-chambered labyrinth design

SB Positive seal protector using a single elastomeric bag

DB Positive seal protector with two elastomeric bags connected in parallel

PF Prefilled protector

Connection TypeS Series

P Parallel

Thrust Bearing TypeHL High load

None Base configuration (intermediate load)

Shaft MaterialHSS High-strength shaft

None Base configuration (intermediate strength)Note: REDA Maximus system protectors protectors use MaxJoint* ESP flange connection technology and do not require oil servicing at the wellsite. All other designs of protectors must be refilled with oil at the wellsire during the installation process.

Miscellaneous

Type Description

HTM Use of high-temperature materials in the protector

Protector Type Nomenclature

Page 300: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | Protectors 299

Performance RatingsElastomer Neoprene/Nitrile Carboxy Nitrile HSN Viton® Aflas®Temperature limit, degF [degC] 250 [121] 275 [135] 300 [149] 351 [177] 399 [204]

Water or oil 1 1 1 2 1

Hydrogen sulfide 1 3 1 4 1

Amines 3 3 3 4 1

Polar chemicals 4 4 1–2 3 3

Carbon dioxide 2 2 2 4 2Definition of ratings: 1 = Excellent—long-term resistance (low swell, high retention of physical properties); 2 = Good—long-term resistance (moderate swell, good retention of physical properties); 3 = Fair—depends on exposure time and temperature (good short-term resistance); 4 = Poor—no resistance, even in the short term.

Note: Temperature limit indicates maximum operating temperature for the elastomers. An elastomeric component will operate at a higher temperature than the ambient wellbore temperature, depending on its location in the equipment. Consult your Schlumberger representative for specific application assistance.

Elastomer Application Guidelines

Page 301: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | Protectors 300

REDA Maximus ESP System Protectors325 Series REDA Maximus ESP System Protector with HSN or Aflas® Elastomers (Bolts Onto the 375 Series Maximus System Motor)

Description Length, ft [m] Weight, lbm [kg]

BSB 5.7 [1.7] 110 [50]LSB 5.7 [1.7] 110 [50]LSL 5.7 [1.7] 110 [50]BPBSL 8.0 [2.4] 176 [80]BSBSL 8.0 [2.4] 176 [80]LSBPB 8.0 [2.4] 176 [80]LSBSB 8.0 [2.4] 176 [80]LSLSB 8.0 [2.4] 176 [80]LSLSL 8.0 [2.4] 176 [80]

400 Series Maximus ESP System Protector with HSN or Aflas Elastomers (Bolts Onto the 456 Series Maximus System Motor)

Description Length, ft [m] Weight, lbm [kg]

LSL 5.8 [1.8] 156 [71]LSB 5.8 [1.8] 156 [71]BSB 5.8 [1.8] 156 [71]BSL 5.8 [1.8] 156 [71]BPBSL 8.0 [2.4] 206 [94]BSBSL 8.0 [2.4] 206 [94]LSBPB 8.0 [2.4] 206 [94]LSBSB 8.0 [2.4] 206 [94]LSLSB 8.0 [2.4] 206 [94]LSLSL 8.0 [2.4] 206 [94]

540 Series Maximus ESP System Protector with HSN or Aflas Elastomers (Bolts Onto the 562 Series Maximus System Motor)

Description Length, ft [m] Weight, lbm [kg]

BSB 6.5 [2.0] 300 [136]BSL 6.5 [2.0] 300 [136]LSB 6.5 [2.0] 300 [136]LSL 6.5 [2.0] 300 [136]BPBSL 8.9 [2.7] 382 [174]BSBSL 8.9 [2.7] 382 [174]LSBPB 8.9 [2.7] 382 [174]LSLSB 8.9 [2.7] 382 [174]LSBSB 8.9 [2.7] 382 [174]LSLSL 8.9 [2.7] 382 [174]

738 Series Maximus ESP System Protector (Bolts to 738 Series Maximus System Motor)Description Length, ft [m] Weight, lbm [kg]66L-HL 6.4 [1.95] 334 [151.6]

66L-HL-HTM-HSS 6.4 [1.95] 334 [151.6]

PF-SB-HL 6.4 [1.95] 334 [151.6]

PF-SB-HL-HTM 6.4 [1.95] 334 [151.6]

BPBSL-HL-HSS 11.9 [3.63] 500 [227.0]

Page 302: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | Protectors 301

325 Series Protector325 Series REDA Maximus ESP System Protector—Single Tandem with HSN Elastomers (Bolts Onto the 375 Series Maximus System Motor)

DescriptionLength ft [m]

Weight, lbm [kg]

Carbon Steel Part Number

Carbon Steel w/Monel® Trim Part Number

Redalloy* Part Number

BSB 5.7 [1.7] 110 [50] 100492055 100492067 100492076BSB-HL 5.7 [1.7] 110 [50] 100492052 100492073 100492078LSB 5.7 [1.7] 110 [50] 100491065 100491067 100491072LSB-HL 5.7 [1.7] 110 [50] 100491060 100491069 100491074BPBSL 8.0 [2.4] 176 [80] 100477101 100477120 100477137BPBSL-HSS 8.0 [2.4] 176 [80] 100477105 100477123 100477139BPBSL-XHSS 8.0 [2.4] 176 [80] tba† 100477125 100477140BPBSL-HL 8.0 [2.4] 176 [80] 100477095 100477126 100477142BPBSL-HL HSS 8.0 [2.4] 176 [80] 100379784 100477127 100477144BPBSL-HL XHSS 8.0 [2.4] 176 [80] tba 100477128 100477145BSBSL 8.0 [2.4] 176 [80] 100486716 100486914 100486921BSBSL-HSS 8.0 [2.4] 176 [80] 100486717 100486915 100486922BSBSL-HL 8.0 [2.4] 176 [80] 100486707 100486917 100486923BSBSL-HL HSS 8.0 [2.4] 176 [80] 100379785 100486918 100486924LSBPB 8.0 [2.4] 176 [80] 100376929 100376936 100376954LSBPB-HSS 8.0 [2.4] 176 [80] 100376930 100376938 100376958LSBPB-XHSS 8.0 [2.4] 176 [80] tba 100376941 100376959LSBPB-HL 8.0 [2.4] 176 [80] 100364179 100364240 100364173LSBPB-HL HSS 8.0 [2.4] 176 [80] 100324781 100364248 100364163LSBPB-HL XHSS 8.0 [2.4] 176 [80] tba 100373985 100373963LSBSB 8.0 [2.4] 176 [80] 100467018 100467037 100467093LSBSB-HSS 8.0 [2.4] 176 [80] 100467017 100467040 100467094LSBSB-XHSS 8.0 [2.4] 176 [80] tba 100467042 100467095LSBSB-HL 8.0 [2.4] 176 [80] 100467016 100467044 100467096LSBSB-HL HSS 8.0 [2.4] 176 [80] 100379783 100467046 100467098LSBSB-HL XHSS 8.0 [2.4] 176 [80] tba 100467047 100467099LSLSB 8.0 [2.4] 176 [80] 100470413 100470425 100470445LSLSB-HSS 8.0 [2.4] 176 [80] 100470412 100470427 100470448LSLSB-HL 8.0 [2.4] 176 [80] 100470410 100470436 100470452LSLSB-HL HSS 8.0 [2.4] 176 [80] 100372594 100470437 100470453LSLSL 8.0 [2.4] 176 [80] 100472171 100472181 100472199LSLSL-HSS 8.0 [2.4] 176 [80] 100472178 100472182 100472200LSLSL-HL 8.0 [2.4] 176 [80] 100472157 100472184 100472201LSLSL-HL HSS 8.0 [2.4] 176 [80] 100379780 100472186 100472202† To be assigned

Page 303: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | Protectors 302

325 Series Maximus ESP System Protector—Single Tandem with Aflas® Elastomer (Bolts Onto the 375 Series Maximus System Motor)

DescriptionLength ft [m]

Weight, lbm [kg]

Carbon Steel Part Number

Carbon Steel w/Monel Trim Part Number

Redalloy Part Number

BSB 5.7 [1.7] 110 [50] 100492056 100492070 100492077

BSB-HL 5.7 [1.7] 110 [50] 100491165 100492074 100492079

LSB 5.7 [1.7] 110 [50] 100491063 100491068 100491073

LSB-HL 5.7 [1.7] 110 [50] 100490590 100491070 100491075

LSL 5.7 [1.7] 110 [50] 100489745 100489747 100489750

LSL-HL 5.7 [1.7] 110 [50] 100489201 100489748 100489751

BPBSL 8.0 [2.4] 176 [80] 100477109 100477158 100477166

BPBSL-HSS 8.0 [2.4] 176 [80] 100477113 100477160 100477167

BPBSL-XHSS 8.0 [2.4] 176 [80] tba† 100477161 100477168

BPBSL-HL 8.0 [2.4] 176 [80] 100477116 100477162 100477169

BPBSL-HL HSS 8.0 [2.4] 176 [80] 100477117 100477163 100477170

BPBSL-HL XHSS 8.0 [2.4] 176 [80] tba 100477165 100477171

BSBSL 8.0 [2.4] 176 [80] 100486733 100486740 100486929

BSBSL-HSS 8.0 [2.4] 176 [80] 100486734 100486741 100486931

BSBSL-HL 8.0 [2.4] 176 [80] 100486735 100486742 100486932

BSBSL-HL HSS 8.0 [2.4] 176 [80] 100486736 100486743 100486933

LSBPB 8.0 [2.4] 176 [80] 100376934 100376944 100376960

LSBPB-HSS 8.0 [2.4] 176 [80] 100376935 100376950 100376962

LSBPB-XHSS 8.0 [2.4] 176 [80] tba 100376948 100376965

LSBPB-HL 8.0 [2.4] 176 [80] 100365449 100365466 100365338

LSBPB-HL HSS 8.0 [2.4] 176 [80] 100365460 100365468 100365367

LSBPB-HL XHSS 8.0 [2.4] 176 [80] tba 100374238 100374205

LSBSB 8.0 [2.4] 176 [80] 100467027 100467076 100467103

LSBSB-HSS 8.0 [2.4] 176 [80] 100467028 100467078 100467104

LSBSB-XHSS 8.0 [2.4] 176 [80] tba 100467080 100467105

LSBSB-HL 8.0 [2.4] 176 [80] 100467029 100467081 100467106

LSBSB-HL HSS 8.0 [2.4] 176 [80] 100467030 100467082 100467107

LSBSB-HL XHSS 8.0 [2.4] 176 [80] tba 100467083 100467108

LSLSB 8.0 [2.4] 176 [80] 100470467 100470482 100470490

LSLSB-HSS 8.0 [2.4] 176 [80] 100470469 100470483 100470491

LSLSB-HL 8.0 [2.4] 176 [80] 100470470 100470485 100470493

LSLSB-HL HSS 8.0 [2.4] 176 [80] 100470471 100470486 100470494

LSLSL 8.0 [2.4] 176 [80] 100472414 100472619 100472633

LSLSL-HSS 8.0 [2.4] 176 [80] 100472413 100472556 100472634

LSLSL-HL 8.0 [2.4] 176 [80] 100472213 100472557 100472635

LSLSL-HL HSS 8.0 [2.4] 176 [80] 100472212 100472558 100472636† To be assigned

325 Series Protector

Page 304: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | Protectors 303

400 Series Protector400 Series REDA Maximus ESP System Protector—Single/Lower Tandem with HSN Elastomers (Bolts Onto the 456 Series Maximus System Motor)

DescriptionLength ft [m]

Weight, lbm [kg]

Carbon Steel Part Number

Carbon Steel w/Monel® Trim Part Number

Redalloy* Part Number

LSL 5.8 [1.8] 156 [71] 100323805 100323825 100323842LSL-HL 5.8 [1.8] 156 [71] 100323817 100323833 100323850LSB 5.8 [1.8] 156 [71] 100323807 100323826 100323843LSB-HL 5.8 [1.8] 156 [71] 100323818 100323834 100323851BSB 5.8 [1.8] 156 [71] 100323808 100323827 100323844BSB-HL 5.8 [1.8] 156 [71] 100323819 100323835 100323852BSL 5.8 [1.8] 156 [71] 100323809 100323828 100323845BSL-HL 5.8 [1.8] 156 [71] 100323820 100323837 100323853BPBSL 8.0 [2.4] 206 [94] 100293040 100293054 100293081BPBSL-HSS 8.0 [2.4] 206 [94] 100293041 100293067 100293084BPBSL-HL 8.0 [2.4] 206 [94] 100293046 100293071 100293095BPBSL-HL-HSS 8.0 [2.4] 206 [94] 100293048 100293075 100293100BSBSL 8.0 [2.4] 206 [94] 100293441 100293453 100293464BSBSL-HSS 8.0 [2.4] 206 [94] 100293442 100293454 100293466BSBSL-HL 8.0 [2.4] 206 [94] 100293445 100293459 100293469BSBSL-HL-HSS 8.0 [2.4] 206 [94] 100293446 100293460 100293470LSBPB 8.0 [2.4] 206 [94] 100293215 100293237 100293256LSBPB-HSS 8.0 [2.4] 206 [94] 100293217 100293238 100293257LSBPB-HL 8.0 [2.4] 206 [94] 100293230 100293245 100293262LSBPB-HL-HSS 8.0 [2.4] 206 [94] 100293232 100293250 100293263LSBSB 8.0 [2.4] 206 [94] 100292371 100292312 100293286LSBSB-HSS 8.0 [2.4] 206 [94] 100292374 100292314 100293289LSBSB-HL 8.0 [2.4] 206 [94] 100292365 100292307 100293278LSBSB-HL-HSS 8.0 [2.4] 206 [94] 100292369 100292310 100293282LSLSB 8.0 [2.4] 206 [94] 100293541 100293557 100293584LSLSB-HSS 8.0 [2.4] 206 [94] 100293546 100293561 100293586LSLSB-HL 8.0 [2.4] 206 [94] 100293549 100293578 100293590LSLSB-HL-HSS 8.0 [2.4] 206 [94] 100293553 100293579 100293594LSLSL 8.0 [2.4] 206 [94] 100293874 100293884 100293897LSLSL-HSS 8.0 [2.4] 206 [94] 100293875 100293885 100293899LSLSL-HL 8.0 [2.4] 206 [94] 100293879 100293890 100293906LSLSL-HL-HSS 8.0 [2.4] 206 [94] 100293881 100293892 100293907

Page 305: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | Protectors 304

400 Series Maximus System Protector—Upper Tandem with HSN Elastomers (Bolts Onto the 400/456 Single/Lower Tandem Maximus System Protector)

DescriptionLength ft [m]

Weight, lbm [kg]

Carbon Steel Part Number

Carbon Steel w/Monel Trim Part Number

Redalloy Part Number

BPBSL 8.0 [2.4] 206 [94] 100291981 100291991 100292001BPBSL-HSS 8.0 [2.4] 206 [94] 100291982 100291992 100292002BPBSL-HL 8.0 [2.4] 206 [94] 100291985 100291996 100292005BPBSL-HL-HSS 8.0 [2.4] 206 [94] 100291987 100291997 100292006LSBPB 8.0 [2.4] 206 [94] 100290587 100290383 100290729LSBPB-HSS 8.0 [2.4] 206 [94] 100290596 100290561 100290727LSBPB-HL 8.0 [2.4] 206 [94] 100290584 100290345 100290717LSBPB-HL-HSS 8.0 [2.4] 206 [94] 100290591 100290557 100290715LSLSB 8.0 [2.4] 206 [94] 100291169 100291180 100291191LSLSB-HSS 8.0 [2.4] 206 [94] 100291171 100291181 100291192LSLSB-HL 8.0 [2.4] 206 [94] 100291174 100291187 100291197LSLSB-HL-HSS 8.0 [2.4] 206 [94] 100291175 100291188 100291199LSLSL 8.0 [2.4] 206 [94] 100291907 100291916 100291927LSLSL-HSS 8.0 [2.4] 206 [94] 100291908 100291917 100291928LSLSL-HL 8.0 [2.4] 206 [94] 100291911 100291921 100291932LSLSL-HL-HSS 8.0 [2.4] 206 [94] 100291912 100291923 100291933

400 Series Protector

Page 306: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | Protectors 305

400 Series Maximus System Protector—Single/Lower Tandem with Aflas® Elastomers (Bolts Onto the 456 Series Maximus System Motor)

DescriptionLength ft [m]

Weight, lbm [kg]

Carbon Steel Part Number

Carbon Steel w/Monel Trim Part Number

Redalloy Part Number

LSL 5.8 [1.8] 156 [71] 100323812 100323829 100323846LSL-HL 5.8 [1.8] 156 [71] 100323821 100323838 100323854LSB 5.8 [1.8] 156 [71] 100323814 100323830 100323847LSB-HL 5.8 [1.8] 156 [71] 100323822 100323839 100323855BSB 5.8 [1.8] 156 [71] 100323815 100323831 100323848BSB-HL 5.8 [1.8] 156 [71] 100323823 100323840 100323856BSL 5.8 [1.8] 156 [71] 100323816 100323832 100323849BSL-HL 5.8 [1.8] 156 [71] 100323824 100323841 100323857BPBSL 8.0 [2.4] 206 [94] 100293043 100293069 100293088BPBSL-HSS 8.0 [2.4] 206 [94] 100293045 100293070 100293090BPBSL-HL 8.0 [2.4] 206 [94] 100293049 100293077 100293103BPBSL-HL-HSS 8.0 [2.4] 206 [94] 100293050 100293079 100293107BSBSL 8.0 [2.4] 206 [94] 100293443 100293457 100293467BSBSL-HSS 8.0 [2.4] 206 [94] 100293444 100293458 100293468BSBSL-HL 8.0 [2.4] 206 [94] 100293447 100293461 100293472BSBSL-HL-HSS 8.0 [2.4] 206 [94] 100293449 100293462 100293473LSBPB 8.0 [2.4] 206 [94] 100293225 100293240 100293259LSBPB-HSS 8.0 [2.4] 206 [94] 100293228 100293243 100293260LSBPB-HL 8.0 [2.4] 206 [94] 100293233 100293251 100293264LSBPB-HL-HSS 8.0 [2.4] 206 [94] 100293235 100293253 100293265LSBSB 8.0 [2.4] 206 [94] 100292370 100292311 100293283LSBSB-HSS 8.0 [2.4] 206 [94] 100292372 100292313 100293287LSBSB-HL 8.0 [2.4] 206 [94] 100292364 100288882 100293276LSBSB-HL-HSS 8.0 [2.4] 206 [94] 100292368 100292309 100293281LSLSB 8.0 [2.4] 206 [94] 100293547 100293567 100293587LSLSB-HSS 8.0 [2.4] 206 [94] 100293548 100293575 100293588LSLSB-HL 8.0 [2.4] 206 [94] 100293554 100293582 100293595LSLSB-HL-HSS 8.0 [2.4] 206 [94] 100293555 100293583 100293597LSLSL 8.0 [2.4] 206 [94] 100293876 100293886 100293901LSLSL-HSS 8.0 [2.4] 206 [94] 100293877 100293888 100293905LSLSL-HL 8.0 [2.4] 206 [94] 100293882 100293894 100293909LSLSL-HL-HSS 8.0 [2.4] 206 [94] 100293883 100293895 100293910

400 Series Protector

Page 307: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | Protectors 306

400 Series Maximus System Protector—Upper Tandem with Aflas Elastomers (Bolts Onto the 400/456 Single/Lower Tandem Maximus System Protector)

DescriptionLength ft [m]

Weight, lbm [kg]

Carbon Steel Part Number

Carbon Steel w/Monel Trim Part Number

Redalloy Part Number

BPBSL 8.0 [2.4] 206 [94] 100291983 100291993 100292003BPBSL-HSS 8.0 [2.4] 206 [94] 100291984 100291995 100292004BPBSL-HL 8.0 [2.4] 206 [94] 100291988 100291998 100292007BPBSL-HL-HSS 8.0 [2.4] 206 [94] 100291989 100291999 100292008LSBPB 8.0 [2.4] 206 [94] 100290589 100290361 100290720LSBPB-HSS 8.0 [2.4] 206 [94] 100290593 100290567 100290719LSBPB-HL 8.0 [2.4] 206 [94] 100290413 100288669 100290712LSBPB-HL-HSS 8.0 [2.4] 206 [94] 100290590 100290551 100290713LSLSB 8.0 [2.4] 206 [94] 100291172 100291182 100291193LSLSB-HSS 8.0 [2.4] 206 [94] 100291173 100291184 100291194LSLSB-HL 8.0 [2.4] 206 [94] 100291178 100291189 100291201LSLSB-HL-HSS 8.0 [2.4] 206 [94] 100291179 100291190 100291203LSLSL 8.0 [2.4] 206 [94] 100291909 100291918 100291930LSLSL-HSS 8.0 [2.4] 206 [94] 100291910 100291920 100291931LSLSL-HL 8.0 [2.4] 206 [94] 100291913 100291924 100291934LSLSL-HL-HSS 8.0 [2.4] 206 [94] 100291914 100291925 100291935

400 Series Protector

Page 308: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | Protectors 307

540 Series Protector540 Series REDA Maximus ESP System Protector—Single Tandem with HSN Elastomers (Bolts Onto the 562 Series Maximus System Motor)

DescriptionLength ft [m]

Weight, lbm [kg]

Carbon Steel Part Number

Carbon Steel w/Monel® Trim Part Number

Redalloy* Part Number

BSB 6.5 [2.0] 300 [136] 100397009 100397013 100397017BSB-NTB/HL 6.5 [2.0] 300 [136] 100397011 100397015 100397019BSL 6.5 [2.0] 300 [136] 100393964 100396983 100396989BSL-NTB/HL 6.5 [2.0] 300 [136] 100396991 100396993 100396995LSB 6.5 [2.0] 300 [136] 100397046 100397052 100397056LSB-NTB/HL 6.5 [2.0] 300 [136] 100397049 100397054 100397058LSL 6.5 [2.0] 300 [136] 100397608 100397615 100397619LSL-NTB/HL 6.5 [2.0] 300 [136] 100397610 100397617 100397621BPBSL 8.9 [2.7] 382 [174] 100390231 100390223 100390215BPBSL-HSS 8.9 [2.7] 382 [174] 100390230 100390222 100390214BPBSL-XHSS 8.9 [2.7] 382 [174] tba† 100391742 100391747BPBSL-NTB/HL 8.9 [2.7] 382 [174] 100391767 100391757 100391763BPBSL-KTB/HL 8.9 [2.7] 382 [174] tba 100390219 100390207BPBSL-NTB/HL, HSS 8.9 [2.7] 382 [174] 100391766 100391756 100391762BPBSL-KTB/HL, HSS 8.9 [2.7] 382 [174] tba 100390218 100390205BPBSL-NTB/HL, XHSS 8.9 [2.7] 382 [174] tba 100391755 100391761BPBSL-KTB/HL, XHSS 8.9 [2.7] 382 [174] tba 100391745 100391749BSBSL 8.9 [2.7] 382 [174] 100390776 100390768 100390760BSBSL-HSS 8.9 [2.7] 382 [174] 100390775 100390767 100390759BSBSL-NTB/HL 8.9 [2.7] 382 [174] 100390772 100390764 100390756BSBSL-NTB/HL, HSS 8.9 [2.7] 382 [174] 100390771 100390763 100390755LSBPB 8.9 [2.7] 382 [174] 100391237 100391255 100391281LSBPB-HSS 8.9 [2.7] 382 [174] 100391236 100391254 100391280LSBPB-XHSS 8.9 [2.7] 382 [174] tba 100391865 100391884LSBPB-NTB/HL 8.9 [2.7] 382 [174] 100391232 100391877 100391888LSBPB-KTB/HL 8.9 [2.7] 382 [174] tba 100391251 100391277LSBPB-NTB/HL, HSS 8.9 [2.7] 382 [174] 100391231 100391875 100391889LSBPB-KTB/HL, HSS 8.9 [2.7] 382 [174] tba 100391256 100391282LSBPB-NTB/HL, XHSS 8.9 [2.7] 382 [174] tba 100391879 100391893LSBPB-KTB/HL, XHSS 8.9 [2.7] 382 [174] tba 100391868 100391886LSLSB 8.9 [2.7] 382 [174] 100392514 100392522 100392530LSLSB-HSS 8.9 [2.7] 382 [174] 100392513 100392521 100392529LSLSB-NTB/HL 8.9 [2.7] 382 [174] 100392510 100392518 100392526LSLSB-NTB/HL, HSS 8.9 [2.7] 382 [174] 100392509 100392517 100392525LSBSB 8.9 [2.7] 382 [174] 100392209 100392217 100392232LSBSB-HSS 8.9 [2.7] 382 [174] 100392208 100392216 100392231LSBSB-NTB/HL 8.9 [2.7] 382 [174] 100392213 100392221 100392236LSBSB-NTB/HL, HSS 8.9 [2.7] 382 [174] 100392212 100392220 100392235LSLSL 8.9 [2.7] 382 [174] 100392278 100392289 100392300LSLSL-HSS 8.9 [2.7] 382 [174] 100392279 100392290 100392301LSLSL-NTB/HL 8.9 [2.7] 382 [174] 100392282 100392293 100392304LSLSL-NTB/HL, HSS 8.9 [2.7] 382 [174] 100392283 100392294 100392305† To be assigned

Page 309: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | Protectors 308

540 Series Maximus System Protector—Single Tandem with Aflas® Elastomers (Bolts Onto the 562 Series Maximus System Motor)

DescriptionLength ft [m]

Weight, lbm [kg]

Carbon Steel Part Number

Carbon Steel w/Monel Trim Part Number

Redalloy Part Number

BSB 6.5 [2.0] 300 [136] 100397010 100397014 100397018BSB-NTB/HL 6.5 [2.0] 300 [136] 100397012 100397016 100397021BSL 6.5 [2.0] 300 [136] 100396982 100396987 100396990BSL-NTB/HL 6.5 [2.0] 300 [136] 100396992 100396994 100396996LSB 6.5 [2.0] 300 [136] 100397047 100397053 100397057LSB-NTB/HL 6.5 [2.0] 300 [136] 100397051 100397055 100397060LSL 6.5 [2.0] 300 [136] 100397609 100397616 100397620LSL-NTB/HL 6.5 [2.0] 300 [136] 100397612 100397618 100397622BPBSL 8.9 [2.7] 382 [174] 100390229 100390221 100390212BPBSL-HSS 8.9 [2.7] 382 [174] 100390228 100390220 100390208BPBSL-XHSS 8.9 [2.7] 382 [174] tba† 100391741 100391746BPBSL-NTB/HL 8.9 [2.7] 382 [174] 100391765 100391754 100391760BPBSL-KTB/HL 8.9 [2.7] 382 [174] tba 100390217 100297439BPBSL-NTB/HL, HSS 8.9 [2.7] 382 [174] tba 100390216 100285486BPBSL-KTB/HL, HSS 8.9 [2.7] 382 [174] tba 100391744 100391748BPBSL-NTB/HL, XHSS 8.9 [2.7] 382 [174] 100391764 100391753 100391759BPBSL-KTB/HL, XHSS 8.9 [2.7] 382 [174] tba 100391752 100391758BSBSL 8.9 [2.7] 382 [174] 100390774 100390766 100390758BSBSL-HSS 8.9 [2.7] 382 [174] 100390773 100390765 100390757BSBSL-NTB/HL 8.9 [2.7] 382 [174] 100390770 100390762 100390754BSBSL-NTB/HL, HSS 8.9 [2.7] 382 [174] 100390769 100390761 100390753LSBPB 8.9 [2.7] 382 [174] 100391234 100391253 100391279LSBPB-HSS 8.9 [2.7] 382 [174] 100391233 100391252 100391278LSBPB-XHSS 8.9 [2.7] 382 [174] tba 100391867 100391885LSBPB-NTB/HL 8.9 [2.7] 382 [174] 100391230 100391874 100391890LSBPB-KTB/HL 8.9 [2.7] 382 [174] tba 100391249 100391276LSBPB-NTB/HL, HSS 8.9 [2.7] 382 [174] 100391229 100391873 100391891LSBPB-KTB/HL, HSS 8.9 [2.7] 382 [174] tba 100391248 100279228LSBPB-NTB/HL, XHSS 8.9 [2.7] 382 [174] tba 100391880 100391894LSBPB-KTB/HL, XHSS 8.9 [2.7] 382 [174] tba 100391870 100391887LSLSB 8.9 [2.7] 382 [174] 100392512 100392520 100392528LSLSB-HSS 8.9 [2.7] 382 [174] 100392511 100392519 100392527LSLSB-NTB/HL 8.9 [2.7] 382 [174] 100392508 100392516 100392524LSLSB-NTB/HL, HSS 8.9 [2.7] 382 [174] 100392507 100392515 100392523LSBSB 8.9 [2.7] 382 [174] 100392207 100392215 100392230LSBSB-HSS 8.9 [2.7] 382 [174] 100392206 100392214 100392229LSBSB-NTB/HL 8.9 [2.7] 382 [174] 100392211 100392219 100392234LSBSB-NTB/HL, HSS 8.9 [2.7] 382 [174] 100392210 100392218 100392233LSLSL 8.9 [2.7] 382 [174] 100392280 100392291 100392302LSLSL-HSS 8.9 [2.7] 382 [174] 100392281 100392292 100392303LSLSL-NTB/HL 8.9 [2.7] 382 [174] 100392284 100392295 100392306LSLSL-NTB/HL, HSS 8.9 [2.7] 382 [174] 100392285 100392296 100392307† To be assigned

540 Series Protector

Page 310: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | Protectors 309

738 Series REDA Maximus ESP System Protector (Bolts to 738 Series Maximus System Motor)Description Length, ft [m] Weight, lbm [kg] Carbon Steel Part Number Redalloy* Alloy Part Number66L-HL 6.4 [1.95] 334 [151.6] 1196724 1230150

66L-HL-HTM-HSS 6.4 [1.95] 334 [151.6] R19672J 100064613

PF-SB-HL 6.4 [1.95] 334 [151.6] 0978429 1071612

PF-SB-HL-HTM 6.4 [1.95] 334 [151.6] J97842C C97842C

BPBSL-HL-HSS 11.9 [3.63] 500 [227.0] tba† 2005492

† To be assigned

738 Series Protector

Page 311: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA Maximus ESP System Motors 310

REDA Maximus ESP System MotorsREDA* Maximus* ESP System Motor SpecificationsMotor Series 375 456 562 738OD, in [mm] 3.75 [95.25] 4.56 [115.8] 5.62 [142.7]

Power range: single-section hp at 60 Hz [kW at 50 Hz]

14.3 to 71.4 [8.9 to 44.4] 30 to 270 [18.6 to 167.8] 37.5 to 563 [23.3 to 350]

Power range: max. tandem hp at 60 Hz [kW at 50 Hz]

285.6 [177.5] 540 [335.6] 1,126 [700]

Rotor bearing type Self-locking (SLK) Self-locking and self-lubricating with polymer lining (SLK-PL)

SLK-PL

Max. winding operating temperature, degF [degC]†

350–400 [177–204] 350–400 [177–204] 350–400 [177–204]

Shipping and storage temperature, degF [degC]

-40 to 176 [-40 to 80] -40 to 176 [–40 to 80] -40 to 176 [-40 to 80]

Operating frequency, Hz 30 to 90 30 to 90 30 to 90

Metallurgy Carbon steel (CS), CS with Monel® trim (CS M-TRM), Redalloy* high-nickel alloy

CS, CS M-TRM, Redalloy high-nickel alloy

CS, CS M-TRM, Redalloy high-nickel alloy

Protector and tandem motor connection

MaxJoint* ESP flange connection technology

MaxJoint technology MaxJoint technology

Motor lead extension connection

Tape-in MaxLok* ESP quick-plug motor lead extension plug-in

MaxLok extension plug-in

Sensor connection options Adapter to sensor GRB with factory-installed motor winding thermocouple or built-in sensor

Oil-filling process Factory vacuum filled with degassed oil specified for the application and sealed with compensating shipping cap (no additional oil filling required on installation)

†Configurable based on well conditions and application requirements.

Maximus ESP System Motor Capacity RangesMin. Casing OD, in [mm]

Motor Series

Power Rating at 60-Hz Frequency, hp

Power Rating at 50-Hz Frequency, hp

4.500 [114.3] 375 14.3–285 11.9–237

5.500 [139.7] 456 30–540 25–450

7.000 [177.8] 562 37.5–1,126 31.3–938

8.625 [219.1] 738 250–1,500 208–1,250

Page 312: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA Maximus ESP System Motors 311

375 Series Motor375 Series REDA* Maximus* ESP System Motor—RA Type

Frequency 60 Hz Frequency 50 Hz

Current, A TypeLength, ft [m]

Weight, lbm [kg]

Power Rating, hp Voltage, V

Power Rating, hp Voltage, V

14.3 386 11.9 322 27.1 UT 5.7 [1.7] 195 [89]

21.4447

17.8372 35.1 UT 7.6 [2.3] 260 [118]

578 482 49.6 UT 7.6 [2.3] 260 [118]

28.6422

23.8352 49.6 UT 9.5 [2.9] 325 [148]

596 497 35.1 UT 9.5 [2.9] 325 [148]

35.7

418

29.7

348 62.5 UT 11.4 [3.5] 388 [176]418 348 62.5 CT 11.6 [3.5] 388 [176]745 621 35.1 UT 11.4 [3.5] 388 [176]745 621 35.1 CT 11.6 [3.5] 388 [176]

42.8

502

35.7

418 62.5 UT 13.2 [4.0] 456 [207]502 418 62.5 CT 13.5 [4.1] 456 [207]764 637 41.1 UT 13.2 [4.0] 456 [207]764 637 41.1 CT 13.5 [4.1] 456 [207]

50.0

586

41.7

488 62.4 UT 15.1 [4.6] 518 [235]586 488 62.4 CT 15.4 [4.7] 518 [235]738 615 49.6 UT 15.1 [4.6] 518 [235]738 615 49.6 CT 15.4 [4.7] 518 [235]1,196 997 30.6 UT 15.1 [4.6] 518 [235]1,196 997 30.6 CT 15.4 [4.7] 518 [235]

57.1

669

47.6

557 62.5 UT 17.0 [5.2] 581 [264]669 557 62.5 CT 17.4 [5.3] 581 [264]844 703 49.6 UT 17.0 [5.2] 581 [264]844 703 49.6 CT 17.4 [5.3] 581 [264]1,193 994 35.1 UT 17.0 [5.2] 581 [264]1,193 994 35.1 CT 17.4 [5.3] 581 [264]1,542 1,285 27.1 UT 17.0 [5.2] 581 [264]1,542 1,285 27.1 CT 17.4 [5.3] 581 [264]

Page 313: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA Maximus ESP System Motors 312

375 Series Motor375 Series Maximus ESP System Motor—RA Type

Frequency 60 Hz Frequency 50 Hz

Current, A TypeLength, ft [m]

Weight, lbm [kg]

Power Rating, hp Voltage, V

Power Rating, hp Voltage, V

64.3

753

53.6

627 62.5 UT 18.9 [5.8] 648 [295]753 627 62.5 CT 19.2 [5.9] 648 [295]949 791 49.6 UT 18.9 [5.8] 648 [295]949 791 49.6 CT 19.2 [5.9] 648 [295]1,342 1,118 35.1 UT 18.9 [5.8] 648 [295]1,342 1,118 35.1 CT 19.2 [5.9] 648 [295]1,538 1,282 30.6 UT 18.9 [5.8] 648 [295]1,538 1,282 30.6 CT 19.2 [5.9] 648 [295]1,735 1,446 27.1 UT 18.9 [5.8] 648 [295]1,735 1,446 27.1 CT 19.2 [5.9] 648 [295]

71.4

837

59.5

697 62.5 UT 20.8 [6.3] 680 [309]837 697 62.5 CT 21.0 [6.4] 680 [309]1,055 879 49.6 UT 20.8 [6.3] 680 [309]1,055 879 49.6 CT 21.0 [6.4] 680 [309]1,491 1,242 35.1 UT 20.8 [6.3] 680 [309]1,491 1,242 35.1 CT 21.0 [6.4] 680 [309]1,710 1,425 30.6 UT 20.8 [6.3] 680 [309]1,710 1,425 30.6 CT 21.0 [6.4] 680 [309]

Page 314: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA Maximus ESP System Motors 313

456 Series Motor456 Series REDA* Maximus* ESP System Motor

Frequency 60 Hz Frequency 50 Hz

Current, A TypeLength, ft [m]

Weight, lbm [kg]

Power Rating, hp Voltage, V

Power Rating, hp Voltage, V

30.0

463

25.0

386 42.3 S-GRB 5.8 [1.8] 266 [121]719 599 27.2 S-GRB 5.8 [1.8] 266 [121]463 386 42.3 S 5.7 [1.7] 266 [121]719 599 27.2 S 5.7 [1.7] 266 [121]

37.5

578

31.3

482 42.5 S-GRB 6.7 [2.0] 303 [138]899 749 27.3 S-GRB 6.7 [2.0] 303 [138]578 482 42.5 S 6.6 [2.0] 303 [138]899 749 27.3 S 6.6 [2.0] 303 [138]

45.0

438

37.5

365 67.1 S-GRB 7.4 [2.3] 339 [154]823 686 35.7 S-GRB 7.4 [2.3] 339 [154]950 792 30.9 S-GRB 7.4 [2.3] 339 [154]438 365 67.1 S 7.3 [2.2] 339 [154]823 686 35.7 S 7.3 [2.2] 339 [154]950 792 30.9 S 7.3 [2.2] 339 [154]

52.5

660

43.8

550 52.0 S-GRB 8.3 [2.5] 376 [154]736 614 46.7 S-GRB 8.3 [2.5] 376 [171]959 799 35.8 S-GRB 8.3 [2.5] 376 [171]1,109 924 31.0 S-GRB 8.3 [2.5] 376 [171]660 550 52.0 S 8.2 [2.5] 376 [171]736 614 46.7 S 8.2 [2.5] 376 [171]959 799 35.8 S 8.2 [2.5] 376 [171]1,109 924 31.0 S 8.2 [2.5] 376 [171]

60.0

754

50.0

628 52.1 S-GRB 9.0 [2.7] 413 [188]925 771 42.3 S-GRB 9.0 [2.7] 413 [188]1,096 913 35.7 S-GRB 9.0 [2.7] 413 [188]1,438 1,198 27.2 S-GRB 9.0 [2.7] 413 [188]754 628 52.1 S 8.9 [2.7] 413 [188]925 771 42.3 S 8.9 [2.7] 413 [188]1,096 913 35.7 S 8.9 [2.7] 413 [188]1,438 1,198 27.2 S 8.9 [2.7] 413 [188]

67.5

849

56.3

708 52.0 S-GRB 9.9 [3.0] 450 [205]1,233 1,027 35.8 S-GRB 9.9 [3.0] 450 [205]849 708 52.0 S 9.8 [3.0] 450 [205]1,233 1,027 35.8 S 9.8 [3.0] 450 [205]

Page 315: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA Maximus ESP System Motors 314

456 Series Motor456 Series Maximus ESP System Motor

Frequency 60 Hz Frequency 50 Hz

Current, A TypeLength, ft [m]

Weight, lbm [kg]

Power Rating, hp Voltage, V

Power Rating, hp Voltage, V

75.0

943

62.5

786 52.0 S-GRB 10.6 [3.2] 486 [221]1,157 964 42.3 S-GRB 10.6 [3.2] 486 [221]1,477 1,231 33.3 S-GRB 10.6 [3.2] 486 [221]1,797 1,498 27.3 S-GRB 10.6 [3.2] 486 [221]943 786 52.0 S 10.5 [3.2] 486 [221]1,157 964 42.3 S 10.5 [3.2] 486 [221]1,477 1,231 33.3 S 10.5 [3.2] 486 [221]1,797 1,498 27.3 S 10.5 [3.2] 486 [221]943 786 52.0 UT 10.7 [3.3] 482 [219]1,157 964 42.3 UT 10.7 [3.3] 482 [219]1,477 1,231 33.3 UT 10.7 [3.3] 482 [219]1,797 1,498 27.3 UT 10.7 [3.3] 482 [219]943 786 52.0 LT-GRB 10.4 [3.2] 443 [201]1,157 964 42.3 LT-GRB 10.4 [3.2] 443 [201]1,477 1,231 33.3 LT-GRB 10.4 [3.2] 443 [201]1,797 1,498 27.3 LT-GRB 10.4 [3.2] 443 [201]

82.5

803

68.8

669 67.3 S-GRB 10.0 [3.0] 523 [238]921 767 58.7 S-GRB 10.0 [3.0] 523 [238]1,272 1,060 42.5 S-GRB 10.0 [3.0] 523 [238]1,978 1,648 27.3 S-GRB 10.0 [3.0] 523 [238]803 669 67.3 S 10.1 [3.1] 523 [238]921 767 58.7 S 10.1 [3.1] 523 [238]1,272 1,060 42.5 S 10.1 [3.1] 523 [238]1,978 1,648 27.3 S 10.1 [3.1] 523 [238]921 767 58.7 UT 11.5 [3.5] 519 [236]1,272 1,060 42.5 UT 11.5 [3.5] 519 [236]1,978 1,648 27.3 UT 11.5 [3.5] 519 [236]

90.0

875

75.0

730 67.4 S-GRB 11.8 [3.6] 560 [255]1,516 1,263 38.7 S-GRB 11.8 [3.6] 560 [255]1,901 1,584 31.0 S-GRB 11.8 [3.6] 560 [255]2,156 1,797 27.2 S-GRB 11.8 [3.6] 560 [255]875 730 67.4 S 11.9 [3.6] 560 [255]1,516 1,263 38.7 S 11.9 [3.6] 560 [255]1,901 1,584 31.0 S 11.9 [3.6] 560 [255]2,156 1,797 27.2 S 11.9 [3.6] 560 [255]875 730 67.4 UT 12.3 [3.8] 555 [252]1,516 1,263 38.7 UT 12.3 [3.8] 555 [252]1,901 1,584 31.0 UT 12.3 [3.8] 555 [252]2,156 1,797 27.2 UT 12.3 [3.8] 555 [252]875 730 67.4 LT-GRB 12.0 [3.7] 532 [242]1,516 1,263 38.7 LT-GRB 12.0 [3.7] 532 [242]1,901 1,584 31.0 LT-GRB 12.0 [3.7] 532 [242]2,156 1,797 27.2 LT-GRB 12.0 [3.7] 532 [242]

Page 316: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA Maximus ESP System Motors 315

456 Series Motor Series Maximus ESP System Motor

Frequency 60 Hz Frequency 50 Hz

Current, A TypeLength, ft [m]

Weight, lbm [kg]

Power Rating, hp Voltage, V

Power Rating, hp Voltage, V

97.5

949

81.3

791 67.3 S-GRB 11.8 [3.6] 597 [271]1,227 1,022 52.0 S-GRB 11.8 [3.6] 597 [271]1,782 1,485 35.8 S-GRB 11.8 [3.6] 597 [271]2,060 1,717 31.0 S-GRB 11.8 [3.6] 597 [271]949 791 67.3 S 11.9 [3.6] 597 [271]1,227 1,022 52.0 S 11.9 [3.6] 597 [271]1,782 1,485 35.8 S 11.9 [3.6] 597 [271]2,060 1,717 31.0 S 11.9 [3.6] 597 [271]949 791 67.3 UT 13.1 [4.0] 592 [269]1,227 1,022 52.0 UT 13.1 [4.0] 592 [269]1,782 1,485 35.8 UT 13.1 [4.0] 592 [269]2,060 1,717 31.0 UT 13.1 [4.0] 592 [269]

105.0

1,021

87.5

851 67.1 S-GRB 13.4 [4.1] 633 [288]1,470 1,225 46.6 S-GRB 13.4 [4.1] 633 [288]2,067 1,723 33.3 S-GRB 13.4 [4.1] 633 [288]2,217 1,848 30.9 S-GRB 13.4 [4.1] 633 [288]1,021 851 67.1 UT 13.9 [4.2] 628 [285]1,470 1,225 46.6 UT 13.9 [4.2] 628 [285]2,067 1,723 33.3 UT 13.9 [4.2] 628 [285]2,217 1,848 30.9 UT 13.9 [4.2] 628 [285]1,021 851 67.1 LT-GRB 13.6 [4.1] 621 [282]1,470 1,225 46.6 LT-GRB 13.6 [4.1] 621 [282]2,067 1,723 33.3 LT-GRB 13.6 [4.1] 621 [282]2,217 1,848 30.9 LT-GRB 13.6 [4.1] 621 [282]

112.5

935

93.8

779 78.9 S-GRB 14.2 [4.3] 670 [305]1,415 1,230 52.0 S-GRB 14.2 [4.3] 670 [305]2,057 1,714 35.8 S-GRB 14.2 [4.3] 670 [305]935 779 78.9 UT 14.7 [4.5] 665 [302]1,476 1,230 51.3 UT 14.8 [4.5] 665 [302]2,057 1,714 35.8 UT 14.7 [4.5] 665 [302]

120.0

997

100.0

831 78.6 S-GRB 15.0 [4.6] 706 [321]1,508 1,257 52.0 S-GRB 15.0 [4.6] 706 [321]2,192 1,826 35.8 S-GRB 15.0 [4.6] 706 [321]2,533 2,111 30.9 S-GRB 15.0 [4.6] 706 [321]997 831 78.6 UT 15.5 [4.7] 702 [319]1,508 1,257 52.0 UT 15.5 [4.7] 702 [319]2,192 1,826 35.8 UT 15.5 [4.7] 702 [319]2,533 2,111 30.9 UT 15.5 [4.7] 702 [319]1,508 1,257 52.0 LT-GRB 15.2 [4.6] 709 [322]2,192 1,826 35.8 LT-GRB 15.2 [4.6] 709 [322]2,533 2,111 30.9 LT-GRB 15.2 [4.6] 709 [322]

Page 317: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA Maximus ESP System Motors 316

456 Series Motor456 Series Maximus ESP System Motor

Frequency 60 Hz Frequency 50 Hz

Current, A TypeLength, ft [m]

Weight, lbm [kg]

Power Rating, hp Voltage, V

Power Rating, hp Voltage, V

127.5

1,059

106.3

882 78.9 S-GRB 15.8 [4.8] 743 [338]1,241 1,035 67.3 S-GRB 15.8 [4.8] 743 [338]1,423 1,186 58.7 S-GRB 15.8 [4.8] 743 [338]2,150 1,791 38.8 S-GRB 15.8 [4.8] 743 [338]1,059 882 78.9 UT 16.3 [5.0] 741 [337]1,241 1,035 67.3 UT 16.3 [5.0] 741 [337]1,423 1,186 58.7 UT 16.3 [5.0] 741 [337]2,150 1,791 38.8 UT 16.3 [5.0] 741 [337]

135.0

1,121

112.5

934 78.9 S-GRB 16.6 [5.1] 784 [356]1,313 1,094 67.4 S-GRB 16.6 [5.1] 784 [356]1,505 1,254 58.7 S-GRB 16.6 [5.1] 784 [356]2,081 1,734 42.5 S-GRB 16.6 [5.1] 784 [356]2,658 2,215 33.3 S-GRB 16.6 [5.1] 784 [356]1,121 934 78.9 UT 17.1 [5.2] 780 [355]1,313 1,094 67.4 UT 17.1 [5.2] 780 [355]1,505 1,254 58.7 UT 17.1 [5.2] 780 [355]2,081 1,734 42.5 UT 17.1 [5.2] 780 [355]2,658 2,215 33.3 UT 17.1 [5.2] 780 [355]1,121 934 78.9 LT-GRB 16.8 [5.1] 798 [363]1,313 1,094 67.4 LT-GRB 16.8 [5.1] 798 [363]1,505 1,254 58.7 LT-GRB 16.8 [5.1] 798 [363]2,081 1,734 42.5 LT-GRB 16.8 [5.1] 798 [363]2,658 2,215 33.3 LT-GRB 16.8 [5.1] 798 [363]

142.5

1,184

118.8

987 78.8 S-GRB 17.4 [5.3] 821 [373]1,793 1,494 52.0 S-GRB 17.4 [5.3] 821 [373]2,199 1,833 42.5 S-GRB 17.4 [5.3] 821 [373]2,403 2,002 38.8 S-GRB 17.4 [5.3] 821 [373]1,184 987 78.8 UT 17.9 [5.5] 817 [371]1,793 1,494 52.0 UT 17.9 [5.5] 817 [371]2,199 1,833 42.5 UT 17.9 [5.5] 817 [371]2,403 2,002 38.8 UT 17.9 [5.5] 817 [371]1,184 987 78.8 LT-GRB 17.6 [5.4] 835 [380]1,793 1,494 52.0 LT-GRB 17.6 [5.4] 835 [380]2,199 1,833 42.5 LT-GRB 17.6 [5.4] 835 [380]2,403 2,002 38.8 LT-GRB 17.6 [5.4] 835 [380]

Page 318: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA Maximus ESP System Motors 317

456 Series Motor456 Series Maximus ESP System Motor

Frequency 60 Hz Frequency 50 Hz

Current, A TypeLength, ft [m]

Weight, lbm [kg]

Power Rating, hp Voltage, V

Power Rating, hp Voltage, V

150.0

1,246

125.0

1,038 78.6 S-GRB 18.2 [5.5] 858 [390]1,673 1,394 58.7 S-GRB 18.2 [5.5] 858 [390]1,886 1,572 52.1 S-GRB 18.2 [5.5] 858 [390]2,314 1,928 42.3 S-GRB 18.2 [5.5] 858 [390]1,246 1,038 78.6 UT 18.7 [5.7] 853 [388]1,673 1,394 58.7 UT 18.7 [5.7] 853 [388]1,886 1,572 52.1 UT 18.7 [5.7] 853 [388]2,314 1,928 42.3 UT 18.7 [5.7] 853 [388]1,246 1,038 78.6 LT-GRB 18.4 [5.6] 871 [396]1,673 1,394 58.7 LT-GRB 18.4 [5.6] 871 [396]2,314 1,928 42.3 LT-GRB 18.4 [5.6] 871 [396]

157.5

1,981

131.3

1,651 52.0 S-GRB 19.0 [5.8] 895 [407]2,205 1,838 46.8 S-GRB 19.0 [5.8] 895 [407]1,981 1,651 52.0 UT 19.5 [5.9] 895 [407]2,205 1,838 46.8 UT 19.5 [5.9] 890 [405]1,981 1,651 52.0 LT-GRB 19.2 [5.9] 908 [413]2,205 1,838 46.8 LT-GRB 19.2 [5.9] 908 [413]

165.0

1,370

137.5

1,142 78.6 S-GRB 19.8 [6.0] 931 [423]1,839 1,533 58.8 S-GRB 19.8 [6.0] 931 [423]2,075 1,729 52.1 S-GRB 19.8 [6.0] 931 [423]2,545 2,121 42.3 S-GRB 19.8 [6.0] 931 [423]1,370 1,142 78.6 UT 20.3 [6.2] 926 [421]1,839 1,533 58.8 UT 20.3 [6.2] 926 [421]2,075 1,729 52.1 UT 20.3 [6.2] 926 [421]2,545 2,121 42.3 UT 20.3 [6.2] 926 [421]2,779 2,316 38.7 UT 20.3 [6.2] 926 [421]1,370 1,142 78.6 LT-GRB 20.0 [6.1] 945 [430]1,839 1,533 58.8 LT-GRB 20.0 [6.1] 945 [430]2,075 1,729 52.1 LT-GRB 20.0 [6.1] 945 [430]2,545 2,121 42.3 LT-GRB 20.0 [6.1] 945 [430]

180.0

1,238

150.0

1,032 95.0 S-GRB 21.4 [6.5] 1,004 [456]1,495 1,245 78.9 S-GRB 21.4 [6.5] 1,004 [456]2,262 1,885 52.0 S-GRB 21.4 [6.5] 1,004 [456]2,520 2,100 46.6 S-GRB 21.4 [6.5] 1,004 [456]1,238 1,032 95.0 UT 21.9 [6.7] 1,000 [455]1,495 1,245 78.9 UT 21.9 [6.7] 1,000 [455]2,262 1,885 52.0 UT 21.9 [6.7] 1,000 [455]2,520 2,100 46.6 UT 21.9 [6.7] 1,000 [455]1,238 1,032 95.0 LT-GRB 21.6 [6.6] 1,018 [463]1,495 1,245 78.9 LT-GRB 21.6 [6.6] 1,018 [463]2,262 1,885 52.0 LT-GRB 21.6 [6.6] 1,018 [463]2,520 2,100 46.6 LT-GRB 21.6 [6.6] 1,018 [463]

Page 319: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA Maximus ESP System Motors 318

456 Series Motor456 Series Maximus ESP System Motor

Frequency 60 Hz Frequency 50 Hz

Current, A TypeLength, ft [m]

Weight, lbm [kg]

Power Rating, hp Voltage, V

Power Rating, hp Voltage, V

195.0

1,342

162.5

1,118 95.0 S-GRB 23.0 [7.0] 1,078 [490]1,619 1,349 78.6 S-GRB 23.0 [7.0] 1,078 [490]2,730 2,275 46.6 S-GRB 23.0 [7.0] 1,078 [490]1,342 1,118 95.0 UT 23.6 [7.2] 1,073 [488]1,619 1,349 78.6 UT 23.6 [7.2] 1,073 [488]2,730 2,275 46.6 UT 23.6 [7.2] 1,073 [488]1,342 1,118 95.0 LT-GRB 23.2 [7.1] 1,092 [496] 1,619 1,349 78.6 LT-GRB 23.2 [7.1] 1,092 [496] 2,730 2,275 46.6 LT-GRB 23.2 [7.1] 1,092 [496]

210.0

2,346

175.0

1,955 58.7 S-GRB 24.7 [7.5] 1,151 [523]2,640 2,200 52.0 S-GRB 24.7 [7.5] 1,151 [523]2,346 1,955 58.7 UT 25.2 [7.7] 1,147 [521]2,640 2,200 52.0 UT 25.2 [7.7] 1,147 [521]2,346 1,955 58.8 LT-GRB 24.8 [7.6] 1,165 [530]2,640 2,200 52.0 LT-GRB 24.8 [7.6] 1,165 [530]

225.0

1,868

187.5

1,557 78.9 S-GRB 26.3 [8.0] 1,225 [557]2,829 2,357 52.0 S-GRB 26.3 [8.0] 1,225 [557]1,868 1,557 78.9 UT 26.8 [8.2] 1,220 [555]2,829 2,357 52.0 UT 26.8 [8.2] 1,220 [555]1,868 1,557 78.9 LT-GRB 26.4 [8.0] 1,248 [567]2,829 2,357 52.0 LT-GRB 26.4 [8.0] 1,248 [567]

240.0

1,993

200.0

1,661 78.6 S-GRB 27.9 [8.5] 1,298 [590]2,676 2,230 58.7 S-GRB 27.9 [8.5] 1,298 [590]1,993 1,661 78.6 UT 28.4 [8.7] 1,293 [588]2,676 2,230 58.7 UT 28.4 [8.7] 1,293 [588]1,993 1,661 78.6 LT-GRB 28.0 [8.5] 1,293 [588]2,676 2,230 58.7 LT-GRB 28.0 [8.5] 1,293 [588]

255.0

2,118

212.5

1,765 78.6 S-GRB 29.5 [9.0] 1,371 [623]2,842 2,369 58.7 S-GRB 29.5 [9.0] 1,371 [623]2,118 1,765 78.6 UT 30.0 [9.1] 1,367 [621]2,842 2,369 58.7 UT 30.0 [9.1] 1,367 [621]2,118 1,765 78.6 LT-GRB 29.7 [9.1] 1,390 [632]2,842 2,369 58.7 LT-GRB 29.7 [9.1] 1,390 [632]

270.0

1,858

225.0

1,549 95.0 S-GRB 31.1 [9.5] 1,449 [659]2,241 1,868 78.6 S-GRB 31.1 [9.5] 1,449 [659]2,626 2,189 67.1 S-GRB 31.1 [9.5] 1,449 [659]1,858 1,549 95.0 UT 31.6 [9.6] 1,440 [655]2,241 1,868 78.6 UT 31.6 [9.6] 1,440 [655]2,626 2,189 67.1 UT 31.6 [9.6] 1,440 [655]1,858 1,549 95.0 LT-GRB 31.3 [9.5] 1,463 [665]2,241 1,868 78.6 LT-GRB 31.3 [9.5] 1,463 [665]2,626 2,189 67.1 LT-GRB 31.3 [9.5] 1,463 [665]

Page 320: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA Maximus ESP System Motors 319

562 Series Motor562 Series REDA* Maximus* ESP System Motor

Frequency 60 Hz Frequency 50 Hz

Current, A TypeLength, ft [m]

Weight, lbm [kg]

Power Rating, hp Voltage, V

Power Rating, hp Voltage, V

37.5

485

31.3

404 47.4 S-GRB 5.1 [1.6] 380 [173]787 656 28.8 S-GRB 5.1 [1.6] 380 [173]485 404 47.4 S 5.1 [1.6] 380 [173]787 656 28.8 S 5.1 [1.6] 380 [173]485 404 47.4 S-GRB 6.0 [1.8] 420 [191]787 656 28.8 S-GRB 6.0 [1.8] 420 [191]

58.3

453

46.9

378 77.3 S-GRB 6.2 [1.9] 470 [214]1,205 1,004 28.2 S-GRB 6.2 [1.9] 470 [214]453 378 77.3 S 6.2 [1.9] 470 [214]1,205 1,004 28.2 S 6.2 [1.9] 470 [214]453 378 77.3 S-Gauge 8.0 [2.4] 510 [232]1,205 1,004 28.2 S-Gauge 8.0 [2.4] 510 [232]

75.0

517

62.5

430 88.1 S-GRB 7.1 [2.2] 534 [243]895 746 50.9 S-GRB 7.1 [2.2] 534 [243]1,272 1,060 36.0 S-GRB 7.1 [2.2] 534 [243]517 430 88.1 S 7.1 [2.2] 534 [243]895 746 50.9 S 7.1 [2.2] 534 [243]1,272 1,060 36.0 S 7.1 [2.2] 534 [243]517 430 88.1 S-Gauge 8.0 [2.4] 574 [261]895 746 50.9 S-Gauge 8.0 [2.4] 574 [261]1,272 1,060 36.0 S-Gauge 8.0 [2.4] 574 [261]

93.8

463

88.1

386 124.0 S-GRB 8.3 [2.5] 622 [283]654 545 88.1 S-GRB 8.3 [2.5] 622 [283]1,036 863 55.1 S-GRB 8.3 [2.5] 622 [283]1,323 1,102 43.2 S-GRB 8.3 [2.5] 622 [283]463 386 124.0 S 8.3 [2.5] 622 [283]654 545 88.1 S 8.3 [2.5] 622 [283]1,036 863 55.1 S 8.3 [2.5] 622 [283]1,323 1,102 43.2 S 8.3 [2.5] 622 [283]463 386 124.0 S-Gauge 10.0 [3.0] 662 [301]654 545 88.1 S-Gauge 10.0 [3.0] 662 [301]1,036 863 55.1 S-Gauge 10.0 [3.0] 662 [301]1,323 1,102 43.2 S-Gauge 10.0 [3.0] 662 [301]

Page 321: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA Maximus ESP System Motors 320

562 Series Motor562 Series Maximus ESP System Motor

Frequency 60 Hz Frequency 50 Hz

Current, A TypeLength, ft [m]

Weight, lbm [kg]

Power Rating, hp Voltage, V

Power Rating, hp Voltage, V

113.0

888

93.8

740 77.3 S-GRB 9.2 [2.8] 686 [312]1,001 834 67.7 S-GRB 9.2 [2.8] 686 [312]1,228 1,023 55.1 S-GRB 9.2 [2.8] 686 [312]1,455 1,212 47.4 S-GRB 9.2 [2.8] 686 [312]1,568 1,307 43.8 S-GRB 9.2 [2.8] 686 [312]2,248 1,874 30.6 S-GRB 9.2 [2.8] 686 [312]888 740 77.3 S 9.2 [2.8] 686 [312]1,001 834 67.7 S 9.2 [2.8] 686 [312]1,228 1,023 55.1 S 9.2 [2.8] 686 [312]1,455 1,212 47.4 S 9.2 [2.8] 686 [312]1,568 1,307 43.8 S 9.2 [2.8] 686 [312]2,248 1,874 30.6 S 9.2 [2.8] 686 [312]888 740 77.3 S-Gauge† 11.0 [3.4] 726 [330]1,001 834 67.7 S-Gauge 11.0 [3.4] 726 [330]1,228 1,023 55.1 S-Gauge 11.0 [3.4] 726 [330]1,455 1,212 47.4 S-Gauge 11.0 [3.4] 726 [330]1,568 1,307 43.8 S-Gauge 11.0 [3.4] 726 [330]2,248 1,874 30.6 S-Gauge 11.0 [3.4] 726 [330]

131.0

511

109.0

426 157.0 S-GRB 10.4 [3.2] 773 [351]912 760 88.1 S-GRB 10.4 [3.2] 773 [351]1,178 982 67.7 S-GRB 10.4 [3.2] 773 [351]1,445 1,204 55.1 S-GRB 10.4 [3.2] 773 [351]511 426 157.0 S 10.4 [3.2] 773 [351]912 760 88.1 S 10.4 [3.2] 773 [351]1,178 982 67.7 S 10.4 [3.2] 773 [351]1,445 1,204 55.1 S 10.4 [3.2] 773 [351]511 426 157.0 S-Gauge 12.0 [3.7] 813 [370]912 760 88.1 S-Gauge 12.0 [3.7] 813 [370]1,178 982 67.7 S-Gauge 12.0 [3.7] 813 [370]1,445 1,204 55.1 S-Gauge 12.0 [3.7] 813 [370]

† Gauge is an integral gauge.

Page 322: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA Maximus ESP System Motors 321

562 Series Motor562 Series Maximus ESP System Motor

Frequency 60 Hz Frequency 50 Hz

Current, A TypeLength, ft [m]

Weight, lbm [kg]

Power Rating, hp Voltage, V

Power Rating, hp Voltage, V

150.0

1,033

125.0

861 88.1 S-GRB 11.3 [3.4] 837 [380]1,335 1,113 67.7 S-GRB 11.3 [3.4] 837 [380]1,486 1,238 61.1 S-GRB 11.3 [3.4] 837 [380]2,393 1,994 38.4 S-GRB 11.3 [3.4] 837 [380]2,696 2,247 33.6 S-GRB 11.3 [3.4] 837 [380]1,033 861 88.1 S 11.3 [3.4] 837 [380]1,335 1,113 67.7 S 11.3 [3.4] 837 [380] 1,486 1,238 61.1 S 11.3 [3.4] 837 [380]2,393 1,994 38.4 S 11.3 [3.4] 837 [380]2,696 2,247 33.6 S 11.3 [3.4] 837 [380]1,033 861 88.1 S-Gauge† 13.0 [4.0] 877 [399]1,335 1,113 67.7 S-Gauge 13.0 [4.0] 877 [399]1,486 1,238 61.1 S-Gauge 13.0 [4.0] 877 [399]2,393 1,994 38.4 S-Gauge 13.0 [4.0] 877 [399]2,696 2,247 33.6 S-Gauge 13.0 [4.0] 877 [399]1,033 861 88.1 UT 11.5 [3.5] 847 [385]1,335 1,113 67.7 UT 11.5 [3.5] 847 [385]1,486 1,238 61.1 UT 11.5 [3.5] 847 [385]2,393 1,994 38.4 UT 11.5 [3.5] 847 [385]2,696 2,247 33.6 UT 11.5 [3.5] 847 [385]1,033 861 88.1 UT HSS 11.5 [3.5] 847 [385]1,335 1,113 67.7 UT HSS 11.5 [3.5] 847 [385]1,486 1,238 61.1 UT HSS 11.5 [3.5] 847 [385]2,393 1,994 38.4 UT HSS 11.5 [3.5] 847 [385]2,696 2,247 33.6 UT HSS 11.5 [3.5] 847 [385]

† Gauge is an integral gauge.

Page 323: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA Maximus ESP System Motors 322

562 Series Motor562 Series Maximus ESP System Motor

Frequency 60 Hz Frequency 50 Hz

Current, A TypeLength, ft [m]

Weight, lbm [kg]

Power Rating, hp Voltage, V

Power Rating, hp Voltage, V

169.0

999

141.0

833 104.0 S-GRB 12.5 [3.8] 925 [420]

1,170 975 88.1 S-GRB 12.5 [3.8] 925 [420]

1,513 1,260 67.7 S-GRB 12.5 [3.8] 925 [420]

1,855 1,546 55.1 S-GRB 12.5 [3.8] 925 [420]

999 833 104.0 S 12.5 [3.8] 925 [420]

1,170 975 88.1 S 12.5 [3.8] 925 [420]

1,513 1,260 67.7 S 12.5 [3.8] 925 [420]

1,855 1,546 55.1 S 12.5 [3.8] 925 [420]

999 833 104.0 S-Gauge† 14.0 [4.3] 965 [439]

1,170 975 88.1 S-Gauge 14.0 [4.3] 965 [439]

1,513 1,260 67.7 S-Gauge 14.0 [4.3] 965 [439]

1,855 1,546 55.1 S-Gauge 14.0 [4.3] 965 [439]

999 833 104.0 UT 14.0 [4.3] 965 [439]

1,170 975 88.1 UT 14.0 [4.3] 965 [439]

1,513 1,260 67.7 UT 14.0 [4.3] 965 [439]

1,855 1,546 55.1 UT 14.0 [4.3] 965 [439]

999 833 104.0 UT HSS 14.0 [4.3] 965 [439]

1,170 975 88.1 UT HSS 14.0 [4.3] 965 [439]

1,513 1,260 67.7 UT HSS 14.0 [4.3] 965 [439]

1,855 1,546 55.1 UT HSS 14.0 [4.3] 965 [439]

188.0

914

156.0

762 124.0 S-GRB 13.4 [4.1] 989 [450]

1,101 918 104.0 S-GRB 13.4 [4.1] 989 [450]

1,291 1,076 88.1 S-GRB 13.4 [4.1] 989 [450]

1,480 1,233 77.3 S-GRB 13.4 [4.1] 989 [450]

2,424 2,020 47.4 S-GRB 13.4 [4.1] 989 [450]

2,803 2,336 40.8 S-GRB 13.4 [4.1] 989 [450]

3,370 2,808 33.6 S-GRB 13.4 [4.1] 989 [450]

914 762 124.0 S 13.4 [4.1] 989 [450]

1,101 918 104.0 S 13.4 [4.1] 989 [450]

1,291 1,076 88.1 S 13.4 [4.1] 989 [450]

1,480 1,233 77.3 S 13.4 [4.1] 989 [450]

2,424 2,020 47.4 S 13.4 [4.1] 989 [450]

2,803 2,336 40.8 S 13.4 [4.1] 989 [450]

3,370 2,808 33.6 S 13.4 [4.1] 989 [450]† Gauge is an integral gauge.

Page 324: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA Maximus ESP System Motors 323

562 Series Motor562 Series Maximus ESP System Motor

Frequency 60 Hz Frequency 50 Hz

Current, A TypeLength, ft [m]

Weight, lbm [kg]

Power Rating, hp Voltage, V

Power Rating, hp Voltage, V

188.0

914

156.0

762 124.0 S-Gauge† 15.0 [4.6] 1,029 [468]1,101 918 104.0 S-Gauge 15.0 [4.6] 1,029 [468]1,291 1,076 88.1 S-Gauge 15.0 [4.6] 1,029 [468]1,480 1,233 77.3 S-Gauge 15.0 [4.6] 1,029 [468]2,424 2,020 47.4 S-Gauge 15.0 [4.6] 1,029 [468]2,803 2,336 40.8 S-Gauge 15.0 [4.6] 1,029 [468]3,370 2,808 33.6 S-Gauge 15.0 [4.6] 1,029 [468]914 762 124.0 UT 13.6 [4.1] 999 [454]1,101 918 104.0 UT 13.6 [4.1] 999 [454]1,291 1,076 88.1 UT 13.6 [4.1] 999 [454]1,480 1,233 77.3 UT 13.6 [4.1] 999 [454]2,424 2,020 47.4 UT 13.6 [4.1] 999 [454]2,803 2,336 40.8 UT 13.6 [4.1] 999 [454]3,370 2,808 33.6 UT 13.6 [4.1] 999 [454]914 762 124.0 UT HSS 13.6 [4.1] 999 [454]1,101 918 104.0 UT HSS 13.6 [4.1] 999 [454]1,291 1,076 88.1 UT HSS 13.6 [4.1] 999 [454]1,480 1,233 77.3 UT HSS 13.6 [4.1] 999 [454]2,424 2,020 47.4 UT HSS 13.6 [4.1] 999 [454]2,803 2,336 40.8 UT HSS 13.6 [4.1] 999 [454]3,370 2,808 33.6 UT HSS 13.6 [4.1] 999 [454]1,101 918 104.0 LT-Gauge† 14.5 [4.4] 1,019 [463]1,480 1,233 77.3 LT-Gauge 14.5 [4.4] 1,019 [463]2,424 2,020 47.4 LT-Gauge 14.5 [4.4] 1,019 [463]2,803 2,336 40.8 LT-Gauge 14.5 [4.4] 1,019 [463]3,370 2,808 33.6 LT-Gauge 14.5 [4.4] 1,019 [463]

† Gauge is an integral gauge.

Page 325: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA Maximus ESP System Motors 324

562 Series Motor562 Series Maximus ESP System Motor

Frequency 60 Hz Frequency 50 Hz

Current, A TypeLength, ft [m]

Weight, lbm [kg]

Power Rating, hp Voltage, V

Power Rating, hp Voltage, V

206.0

1,428

172.0

1,190 88.1 S-GRB 14.6 [4.5] 1,076 [489]1,847 1,539 67.7 S-GRB 14.6 [4.5] 1,076 [489]2,264 1,887 55.1 S-GRB 14.6 [4.5] 1,076 [489]1,428 1,190 88.1 S 14.6 [4.5] 1,076 [489]1,847 1,539 67.7 S 14.6 [4.5] 1,076 [489]2,264 1,887 55.1 S 14.6 [4.5] 1,076 [489]1,428 1,190 88.1 UT 14.7 [4.5] 1,086 [494]1,847 1,539 67.7 UT 14.7 [4.5] 1,086 [494]2,264 1,887 55.1 UT 14.7 [4.5] 1,086 [494]1,428 1,190 88.1 UT HSS 14.7 [4.5] 1,086 [494]1,847 1,539 67.7 UT HSS 14.7 [4.5] 1,086 [494]2,264 1,887 55.1 UT HSS 14.7 [4.5] 1,086 [494]1,428 1,190 88.1 LT-GRB 14.7 [4.5] 1,086 [494]1,847 1,539 67.7 LT-GRB 14.7 [4.5] 1,086 [494]2,264 1,887 55.1 LT-GRB 14.7 [4.5] 1,086 [494]

225.0

1,096

188.0

914 124.0 S-GRB 15.5 [4.7] 1,141 [519]1,323 1,102 104.0 S-GRB 15.5 [4.7] 1,141 [519]1,776 1,480 77.3 S-GRB 15.5 [4.7] 1,141 [519]2,229 1,858 61.1 S-GRB 15.5 [4.7] 1,141 [519]1,096 914 124.0 S 15.5 [4.7] 1,141 [519]1,323 1,102 104.0 S 15.5 [4.7] 1,141 [519]1,776 1,480 77.3 S 15.5 [4.7] 1,141 [519]2,229 1,858 61.1 S 15.5 [4.7] 1,141 [519]1,096 914 124.0 UT 15.7 [4.8] 1,150 [523]1,323 1,102 104.0 UT 15.7 [4.8] 1,150 [523]1,776 1,480 77.3 UT 15.7 [4.8] 1,150 [523]2,229 1,858 61.1 UT 15.7 [4.8] 1,150 [523]1,096 914 124.0 UT-HSS 15.7 [4.8] 1,150 [523]1,323 1,102 104.0 UT-HSS 15.7 [4.8] 1,150 [523]1,776 1,480 77.3 UT-HSS 15.7 [4.8] 1,150 [523]2,229 1,858 61.1 UT-HSS 15.7 [4.8] 1,150 [523]1,096 914 124.0 LT-GRB 15.3 [4.7] 1,141 [519]1,323 1,102 104.0 LT-GRB 15.3 [4.7] 1,141 [519]1,776 1,480 77.3 LT-GRB 15.3 [4.7] 1,141 [519]2,229 1,858 61.1 LT-GRB 15.3 [4.7] 1,141 [519]1,323 1,102 104.0 LT-Gauge† 16.6 [5.1] 1,171 [532]1,776 1,480 77.3 LT-Gauge 16.6 [5.1] 1,171 [532]2,229 1,858 61.1 LT-Gauge 16.6 [5.1] 1,171 [532]1,096 914 124.0 CT 15.4 [4.7] 1,150 [523]1,323 1,102 104.0 CT 15.4 [4.7] 1,150 [523]1,096 914 124.0 CT-HSS 15.4 [4.7] 1,150 [523]1,323 1,102 104.0 CT-HSS 15.4 [4.7] 1,150 [523]

† Gauge is an integral gauge

Page 326: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA Maximus ESP System Motors 325

562 Series Motor562 Series Maximus ESP System Motor

Frequency 60 Hz Frequency 50 Hz

Current, A TypeLength, ft [m]

Weight, lbm [kg]

Power Rating, hp Voltage, V

Power Rating, hp Voltage, V

263.0

1,279

219.0

1,065 124.0 S-GRB 17.6 [5.4] 1,291 [587]1,544 1,287 104.0 S-GRB 17.6 [5.4] 1,291 [587]1,808 1,506 88.1 S-GRB 17.6 [5.4] 1,291 [587]2,601 2,168 61.1 S-GRB 17.6 [5.4] 1,291 [587]1,279 1,065 124.0 UT 17.8 [5.4] 1,302 [592]1,544 1,287 104.0 UT 17.8 [5.4] 1,302 [592]1,808 1,506 88.1 UT 17.8 [5.4] 1,302 [592]1,279 1,065 124.0 UT-HSS 17.8 [5.4] 1,302 [592]1,544 1,287 104.0 UT-HSS 17.8 [5.4] 1,302 [592]1,808 1,506 88.1 UT-HSS 17.8 [5.4] 1,302 [592]1,279 1,065 124.0 LT-GRB 17.4 [5.3] 1,291 [587]1,544 1,287 104.0 LT-GRB 17.4 [5.3] 1,291 [587]1,808 1,506 88.1 LT-GRB 17.4 [5.3] 1,291 [587]1,279 1,065 124.0 LT-Gauge† 18.6 [5.7] 1,321 [600]1,544 1,287 104.0 LT-Gauge 18.6 [5.7] 1,321 [600]1,808 1,506 88.1 LT-Gauge 18.6 [5.7] 1,321 [600]1,279 1,065 124.0 CT 17.5 [5.3] 1,302 [592]1,279 1,065 124.0 CT-HSS 17.5 [5.3] 1,302 [592]

300.0

1,461

250.0

1,217 124.0 S-GRB 19.7 [6.0] 1,442 [655]1,763 1,469 104.0 S-GRB 19.7 [6.0] 1,442 [655]2,368 1,974 77.3 S-GRB 19.7 [6.0] 1,442 [655]2,671 2,226 67.7 S-GRB 19.7 [6.0] 1,442 [655]1,461 1,217 124.0 UT 19.9 [6.1] 1,454 [661]1,763 1,469 104.0 UT 19.9 [6.1] 1,454 [661]2,368 1,974 77.3 UT 19.9 [6.1] 1,454 [661]1,461 1,217 124.0 UT-HSS 19.9 [6.1] 1,454 [661]1,763 1,469 104.0 UT-HSS 19.9 [6.1] 1,454 [661]2,368 1,974 77.3 UT-HSS 19.9 [6.1] 1,454 [661]1,461 1,217 124.0 LT-GRB 19.5 [5.9] 1,442 [655]1,763 1,469 104.0 LT-GRB 19.5 [5.9] 1,442 [655]1,461 1,217 124.0 LT-Gauge 20.7 [6.3] 1,472 [669]1,763 1,469 104.0 LT-Gauge 20.7 [6.3] 1,472 [669]2,368 1,974 77.3 LT-Gauge 20.7 [6.3] 1,472 [669]1,763 1,469 104.0 CT 19.6 [6.0] 1,454 [661]1,763 1,469 104.0 CT-HSS 19.6 [6.0] 1,454 [661]

† Gauge is an integral gauge.

Page 327: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA Maximus ESP System Motors 326

562 Series Motor562 Series Maximus ESP System Motor

Frequency 60 Hz Frequency 50 Hz

Current, A TypeLength, ft [m]

Weight, lbm [kg]

Power Rating, hp Voltage, V

Power Rating, hp Voltage, V

338.0

1,644

281.0

1,370 124.0 S-GRB 21.8 [6.6] 1,594 [725]1,984 1,653 104.0 S-GRB 21.8 [6.6] 1,594 [725]2,324 1,937 88.1 S-GRB 21.8 [6.6] 1,594 [725]2,665 2,220 77.3 S-GRB 21.8 [6.6] 1,594 [725]1,644 1,370 124.0 UT 22.0 [6.7] 1,605 [730]1,984 1,653 104.0 UT 22.0 [6.7] 1,605 [730]2,324 1,937 88.1 UT 22.0 [6.7] 1,605 [730]1,644 1,370 124.0 UT-HSS 22.0 [6.7] 1,605 [730]1,984 1,653 104.0 UT-HSS 22.0 [6.7] 1,605 [730]2,324 1,937 88.1 UT-HSS 22.0 [6.7] 1,605 [730]1,644 1,370 124.0 LT-GRB 21.6 [6.6] 1,594 [725]1,984 1,653 104.0 LT-GRB 21.6 [6.6] 1,594 [725]2,324 1,937 88.1 LT-GRB 21.6 [6.6] 1,594 [725]1,644 1,370 124.0 LT-Gauge† 22.8 [7.0] 1,624 [738]1,984 1,653 104.0 LT-Gauge 22.8 [7.0] 1,624 [738]1,644 1,370 124.0 CT 21.7 [6.6] 1,605 [730]1,644 1,370 124.0 CT-HSS 21.7 [6.6] 1,605 [730]

375.0

1,448

313.0

1,207 157.0 S-GRB 23.9 [7.3] 1,745 [793]1,827 1,522 124.0 S-GRB 23.9 [7.3] 1,745 [793]2,204 1,837 104.0 S-GRB 23.9 [7.3] 1,745 [793]2,582 2,152 88.1 S-GRB 23.9 [7.3] 1,745 [793]1,448 1,207 157.0 UT 24.1 [7.3] 1,757 [799]1,827 1,522 124.0 UT 24.1 [7.3] 1,757 [799]2,204 1,837 104.0 UT 24.1 [7.3] 1,757 [799]2,582 2,152 88.1 UT 24.1 [7.3] 1,757 [799]1,448 1,207 157.0 UT-HSS 24.1 [7.3] 1,757 [799]1,827 1,522 124.0 UT-HSS 24.1 [7.3] 1,757 [799]2,204 1,837 104.0 UT-HSS 24.1 [7.3] 1,757 [799]2,582 2,152 88.1 UT-HSS 24.1 [7.3] 1,757 [799]1,448 1,207 157.0 LT-GRB 23.7 [7.2] 1,745 [793]1,827 1,522 124.0 LT-GRB 23.7 [7.2] 1,745 [793]2,204 1,837 104.0 LT-GRB 23.7 [7.2] 1,745 [793]2,582 2,152 88.1 LT-GRB 23.7 [7.2] 1,745 [793]1,448 1,207 157.0 CT 23.8 [7.3] 1,757 [799]1,448 1,207 157.0 CT-HSS 23.8 [7.3] 1,757 [799]

† Gauge is an integral gauge.

Page 328: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA Maximus ESP System Motors 327

562 Series Motor562 Series Maximus ESP System Motor

Frequency 60 Hz Frequency 50 Hz

Current, A TypeLength, ft [m]

Weight, lbm [kg]

Power Rating, hp Voltage, V

Power Rating, hp Voltage, V

413.0

1,594

344.0

1,328 157.0 S-GRB 26.0 [7.9] 1,897 [862]2,009 1,674 124.0 S-GRB 26.0 [7.9] 1,897 [862]2,841 2,367 88.1 S-GRB 26.0 [7.9] 1,897 [862]3,672 3,060 67.7 S-GRB 26.0 [7.9] 1,897 [862]1,594 1,328 157.0 UT 26.1 [8.0] 1,908 [867]2,009 1,674 124.0 UT 26.1 [8.0] 1,908 [867]2,841 2,367 88.1 UT 26.1 [8.0] 1,908 [867]3,672 3,060 67.7 UT 26.1 [8.0] 1,908 [867]1,594 1,328 157.0 UT-HSS 26.1 [8.0] 1,908 [867]2,009 1,674 124.0 UT-HSS 26.1 [8.0] 1,908 [867]2,841 2,367 88.1 UT-HSS 26.1 [8.0] 1,908 [867]3,672 3,060 67.7 UT-HSS 26.1 [8.0] 1,908 [867]1,594 1,328 157.0 LT-GRB 25.8 [7.9] 1,897 [862]2,009 1,674 124.0 LT-GRB 25.8 [7.9] 1,897 [862]2,841 2,367 88.1 LT-GRB 25.8 [7.9] 1,897 [862]3,672 3,060 67.7 LT-GRB 25.8 [7.9] 1,897 [862]1,594 1,328 157.0 CT 25.9 [7.9] 1,908 [867]1,594 1,328 157.0 CT-HSS 25.9 [7.9] 1,908 [867]

450.0

1,738

375.0

1,448 157.0 S-GRB 28.1 [8.6] 2,048 [931]2,192 1,827 124.0 S-GRB 28.1 [8.6] 2,048 [931]2,646 2,205 104.0 S-GRB 28.1 [8.6] 2,048 [931]3,552 2,960 77.3 S-GRB 28.1 [8.6] 2,048 [931]4,005 3,338 67.7 S-GRB 28.1 [8.6] 2,048 [931]1,738 1,448 157.0 UT 28.2 [8.6] 2,060 [936]2,192 1,827 124.0 UT 28.2 [8.6] 2,060 [936]2,646 2,205 104.0 UT 28.2 [8.6] 2,060 [936]1,738 1,448 157.0 UT-HSS 28.2 [8.6] 2,060 [936]2,192 1,827 124.0 UT-HSS 28.2 [8.6] 2,060 [936]2,646 2,205 104.0 UT-HSS 28.2 [8.6] 2,060 [936]1,738 1,448 157.0 LT-GRB 27.9 [8.5] 2,048 [931]2,192 1,827 124.0 LT-GRB 27.9 [8.5] 2,048 [931]2,646 2,205 104.0 LT-GRB 27.9 [8.5] 2,048 [931]1,738 1,448 157.0 CT 28.0 [8.5] 2,060 [936]2,192 1,827 124.0 CT 28.0 [8.5] 2,060 [936]1,738 1,448 157.0 CT-HSS 28.0 [8.5] 2,060 [936]2,192 1,827 124.0 CT-HSS 28.0 [8.5] 2,060 [936]

Page 329: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA Maximus ESP System Motors 328

562 Series Motor562 Series Maximus ESP System Motor

Frequency 60 Hz Frequency 50 Hz

Current, A TypeLength, ft [m]

Weight, lbm [kg]

Power Rating, hp Voltage, V

Power Rating, hp Voltage, V

488.0

1,884

406.0

1,570 157.0 S-GRB 30.2 [9.2] 2,200 [1,000]2,375 1,979 124.0 S-GRB 30.2 [9.2] 2,200 [1,000]2,865 2,387 104.0 S-GRB 30.2 [9.2] 2,200 [1,000]3,847 3,206 77.3 S-GRB 30.2 [9.2] 2,200 [1,000]1,884 1,570 157.0 UT 30.3 [9.2] 2,250 [1,023]2,375 1,979 124.0 UT 30.3 [9.2] 2,250 [1,023]1,884 1,570 157.0 UT-HSS 30.3 [9.2] 2,250 [1,023]2,375 1,979 124.0 UT-HSS 30.3 [9.2] 2,250 [1,023]1,884 1,570 157.0 LT-GRB 30.0 [9.1] 2,200 [1,000]2,375 1,979 124.0 LT-GRB 30.0 [9.1] 2,200 [1,000]1,884 1,570 157.0 CT 30.1 [9.2] 2,250 [1,023]2,375 1,979 124.0 CT 30.1 [9.2] 2,250 [1,023]1,884 1,570 157.0 CT-HSS 30.1 [9.2] 2,250 [1,023]2,375 1,979 124.0 CT-HSS 30.1 [9.2] 2,250 [1,023]

525.0

2,028

438.0

1,690 157.0 S-GRB 32.3 [9.8] 2,351 [1,069]2,557 2,131 124.0 S-GRB 32.3 [9.8] 2,351 [1,069]3,086 2,572 104.0 S-GRB 32.3 [9.8] 2,351 [1,069]3,615 3,013 88.1 S-GRB 32.3 [9.8] 2,351 [1,069]4,144 3,454 77.3 S-GRB 32.3 [9.8] 2,351 [1,069]2,028 1,690 157.0 UT 32.4 [9.9] 2,363 [1,074]2,557 2,131 124.0 UT 32.4 [9.9] 2,363 [1,074]2,028 1,690 157.0 UT-HSS 32.4 [9.9] 2,363 [1,074]2,557 2,131 124.0 UT-HSS 32.4 [9.9] 2,363 [1,074]2,028 1,690 157.0 LT-GRB 32.1 [9.8] 2,351 [1,069]2,557 2,131 124.0 LT-GRB 32.1 [9.8] 2,351 [1,069]2,028 1,690 157.0 CT 32.1 [9.8] 2,351 [1,069]2,028 1,690 157.0 CT-HSS 32.1 [9.8] 2,351 [1,069]

563.0

2,173

469.0

1,811 157.0 S-GRB 34.4 [10.5] 2,503 [1,138]2,740 2,284 124.0 S-GRB 34.4 [10.5] 2,503 [1,138]3,306 2,755 104.0 S-GRB 34.4 [10.5] 2,503 [1,138]3,873 3,228 88.1 S-GRB 34.4 [10.5] 2,503 [1,138]2,173 1,811 157.0 UT 34.5 [10.5] 2,540 [1,155]2,740 2,284 124.0 UT 34.5 [10.5] 2,540 [1,155]2,173 1,811 157.0 UT-HSS 34.5 [10.5] 2,540 [1,155]2,740 2,284 124.0 UT-HSS 34.5 [10.5] 2,540 [1,155]2,173 1,811 157.0 LT-GRB 34.2 [10.4] 2,503 [1,138]

Page 330: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA Maximus ESP System Motors 329

738 Series Motor738 Series REDA* Maximus* ESP System Motor—RK TypeFrequency 60 Hz Frequency 50 HzPower Rating, hp Voltage, V

Power Rating, hp Voltage, V Current, A Type

Length, ft [m]

Weight, lbm [kg]

Carbon Steel Part Number

Redalloy* Alloy Part Number

250

2,277 208 1,897 66.7 S 12.3 [3.8] 1,256 [570.2] 2012369 2012472

3,238 2,697 46.9 S 12.3 [3.8] 1,256 [570.2] 2012370 2012473

4,200 3,499 36.2 S 12.3 [3.8] 1,256 [570.2] 2012371 2012474

300

2,270 250

1,891 80.3 S 13.9 [4.2] 1,490 [676.5] 2012373 2012476

3,656 3,045 49.8 S 13.9 [4.2] 1,490 [676.5] 2012374 2012477

4,117 3,429 44.3 S 13.9 [4.2] 1,490 [676.5] 2012372 2012475

350

2,379

292

1,982 89.4 S 15.6 [4.8] 1,724 [782.7] 2012375 2012478

3,187 2,655 66.7 S 15.6 [4.8] 1,724 [782.7] 2012376 2012479

4,265 3,553 49.8 S 15.6 [4.8] 1,724 [782.7] 2012377 2012480

400

2,411

333

2,008 100.8 S 17.2 [5.2] 1,958 [888.9] 2012378 2012481

3,335 2,778 72.9 S 17.2 [5.2] 1,958 [888.9] 2012379 2012482

4,258 3,547 57.1 S 17.2 [5.2] 1,958 [888.9] 2012380 2012483

450

2,020

375

1,683 135.3 UT 18.8 [5.7] 2,193 [995.6] 2012511 2012519

2,366 1,971 115.5 S 18.8 [5.7] 2,193 [995.6] 2012381 2012484

3,405 2,836 80.3 S 18.8 [5.7] 2,193 [995.6] 2012382 2012485

4,097 3,413 66.7 S 18.8 [5.7] 2,193 [995.6] 2012383 2012486

500

1,860

417

1,549 163.3 UT 20.5 [6.3] 2,427 [1,101.9] 2012512 2012520

1,860 1,549 163.3 LT 20.0 [6.1] 2,427 [1,101.9] 2013061 2013079

2,244 1,869 135.4 LT 20.0 [6.1] 2,427 [1,101.9] 2013063 2013080

2,244 1,869 135.4 S 20.5 [6.3] 2,427 [1,101.9] 2012384 2012487

3,398 2,831 89.4 S 20.5 [6.3] 2,427 [1,101.9] 2012385 2012488

4,169 3,473 72.9 S 20.5 [6.3] 2,427 [1,101.9] 2012386 2012489

550

2,046

458

1,704 163.3 UT 22.2 [6.8] 2,661 [1,208.1] 2012513 2012521

2,046 1,704 163.3 LT 21.7 [6.6] 2,661 [1,208.1] 2013064 2013081

2,469 2,057 135.3 S 22.2 [6.8] 2,661 [1,208.1] 2012387 2012490

3,315 2,762 100.8 S 22.2 [6.8] 2,661 [1,208.1] 2012388 2012491

4,162 3,468 80.3 S 22.2 [6.8] 2,661 [1,208.1] 2012389 2012492

600

1,770

500

1,474 205.9 UT 23.8 [7.3] 2,895 [1,314.3] 2013240 2013247

2,232 1,859 163.3 UT 23.8 [7.3] 2,895 [1,314.3] 2012514 2012522

1,770 1,474 205.9 LT 23.4 [7.1] 2,895 [1,314.3] 2013065 2013082

2,232 1,859 163.3 LT 23.4 [7.1] 2,895 [1,314.3] 2013066 2013083

2,232 1,859 163.3 S 23.8 [7.3] 2,895 [1,314.3] 2012390 2012493

3,155 2,628 115.5 S 23.8 [7.3] 2,895 [1,314.3] 2012391 2012494

3,616 3,012 100.8 S 23.8 [7.3] 2,895 [1,314.3] 2012392 2012495

650

1,917

541

1,597 206.0 UT 25.5 [7.8] 3,129 [1,420.6] 2013241 2013248

1,917 1,597 206.0 LT 25.0 [7.6] 3,129 [1,420.6] 2013067 2013084

2,418 2,014 163.3 S 25.5 [7.8] 3,129 [1,420.6] 2012393 2012496

3,418 2,847 115.5 S 25.5 [7.8] 3,129 [1,420.6] 2012394 2012497

3,918 3,264 100.8 S 25.5 [7.8] 3,129 [1,420.6] 2012395 2012498

Page 331: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA Maximus ESP System Motors 330

738 Series Motor738 Series Maximus ESP System Motor—RK Type (Continued)Frequency 60 Hz Frequency 50 Hz

Current, A TypeLength, ft [m]

Weight, lbm [kg]

Carbon Steel Part Number

Redalloy Alloy Part Number

Power Rating, hp Voltage, V

Power Rating, hp Voltage, V

700

2,065

583

1,720 205.9 UT 27.1 [8.3] 3,363 [1,526.8] 2013242 2013249

2,065 1,720 205.9 LT 26.6 [8.1] 3,363 [1,526.8] 2013068 2013085

2,604 2,169 163.3 S 27.1 [8.3] 3,363 [1,526.8] 2012396 2012499

3,142 2,617 135.3 S 27.1 [8.3] 3,363 [1,526.8] 2012397 2012500

4,220 3,515 100.8 S 27.1 [8.3] 3,363 [1,526.8] 2012398 2012501

750

2,212

625

1,843 206.0 UT 28.7 [8.8] 3,598 [1,633.5] 2001634 2013250

2,212 1,843 206.0 LT 28.3 [8.6] 3,598 [1,633.5] 2013069 2013086

2,212 1,843 206.0 S 28.8 [8.8] 3,598 [1,633.5] 2013305 2013311

3,367 2,805 135.3 S 28.8 [8.8] 3,598 [1,633.5] 2012399 2012502

3,943 3,285 115.5 S 28.8 [8.8] 3,598 [1,633.5] 2012400 2012503

800

2,360

666

1,966 205.9 S 30.4 [9.3] 3,832 [1,739.7] 2013306 2013312

2,975 2,478 163.3 S 30.4 [9.3] 3,832 [1,739.7] 2012401 2012504

3,591 2,991 135.3 S 30.4 [9.3] 3,832 [1,739.7] 2012402 2012505

850

2,507

708

2,088 206.0 S 32.0 [9.8] 4,066 [1,846.0] 2013307 2013313

3,161 2,633 163.3 S 32.0 [9.8] 4,066 [1,846.0] 2012403 2012506

3,815 3,178 135.3 S 32.0 [9.8] 4,066 [1,846.0] 2012404 2012507

9003,347

7502,788 163.3 S 33.7 [10.3] 4,300 [1,955.2] 2012406 2012509

4,040 3,365 135.3 S 33.7 [10.3] 4,300 [1,955.2] 2012405 2012508

Page 332: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA Maximus ESP System Motors 331

738 Series Motor738 Series Maximus ESP System Motor—RK Type with Integral Phoenix* Downhole Monitoring Systems AdapterFrequency 60 Hz Frequency 50 Hz

Current, A TypeLength, ft [m]

Weight, lbm [kg]

Carbon Steel Part Number

Redalloy Alloy Part Number

Power Rating, hp Voltage, V

Power Rating, hp Voltage, V

250

2,277

208

1,897 66.7 S 12.5 [3.8] 1,256 [570.2] 2013100 2013174

3,238 2,697 46.9 S 12.5 [3.8] 1,256 [570.2] 2013101 2013175

4,200 3,499 36.2 S 12.5 [3.8] 1,256 [570.2] 2013102 2013176

300

2,270

250

1,891 80.3 S 14.1 [4.3] 1,490 [676.5] 2013104 2013178

3,656 3,045 49.8 S 14.1 [4.3] 1,490 [676.5] 2013105 2013179

4,117 3,429 44.3 S 14.1 [4.3] 1,490 [676.5] 2013103 2013177

350

2,379

292

1,982 89.4 S 15.7 [4.8] 1,724 [782.7] 2013106 2013180

3,187 2,655 66.7 S 15.7 [4.8] 1,724 [782.7] 2013107 2013181

4,265 3,553 49.8 S 15.7 [4.8] 1,724 [782.7] 2013108 2013182

400

2,411

333

2,008 100.8 S 17.4 [5.3] 1,958 [888.9] 2013109 2013183

3,335 2,778 72.9 S 17.4 [5.3] 1,958 [888.9] 2013110 2013185

4,258 3,547 57.1 S 17.4 [5.3] 1,958 [888.9] 2013111 2013186

450 2,366

375 1,971 115.5 S 19.0 [5.8] 2,193 [995.6] 2013112 2013187

3,405 2,836 80.3 S 19.0 [5.8] 2,193 [995.6] 2013113 2013188

500

1,860

417

1,549 163.3 LT 20.2 [6.2] 2,427 [1,101.9] 2013213 2013228

2,244 1,869 135.4 LT 20.2 [6.2] 2,427 [1,101.9] 2013214 2013229

2,244 1,869 135.4 S 20.6 [6.3] 2,427 [1,101.9] 2013115 2013190

3,398 2,831 89.4 S 20.6 [6.3] 2,427 [1,101.9] 2013116 2013191

4,169 3,473 72.9 S 20.6 [6.3] 2,427 [1,101.9] 2013117 2013192

550

2,046

458

1,704 163.3 LT 21.9 [6.7] 2,661 [1,208.1] 2013215 2013230

2,469 2,057 135.3 S 22.4 [6.8] 2,661 [1,208.1] 2013118 2013193

3,315 2,762 100.8 S 22.4 [6.8] 2,661 [1,208.1] 2013119 2013194

4,162 3,468 80.3 S 22.4 [6.8] 2,661 [1,208.1] 2013120 2013195

600

1,770

500

1,474 205.9 LT 23.5 [7.2] 2,895 [1,314.3] 2013216 2013231

2,232 1,859 163.3 LT 23.5 [7.2] 2,895 [1,314.3] 2013217 2013232

2,232 1,859 163.3 S 24.0 [7.3] 2,895 [1,314.3] 2013121 2013196

3,155 2,628 115.5 S 24.0 [7.3] 2,895 [1,314.3] 2013122 2013197

3,616 3,012 100.8 S 24.0 [7.3] 2,895 [1,314.3] 2013123 2013198

650

1,917

541

1,597 206.0 LT 25.2 [7.7] 3,129 [1,420.6] 2013218 2013233

2,418 2,014 163.3 S 25.7 [7.8] 3,129 [1,420.6] 2013124 2013199

3,418 2,847 115.5 S 25.7 [7.8] 3,129 [1,420.6] 2013125 2013200

3,918 3,264 100.8 S 25.7 [7.8] 3,129 [1,420.6] 2013126 2013201

700

2,065

583

1,720 205.9 LT 26.8 [8.2] 3,363 [1,526.8] 2013219 2013234

2,604 2,169 163.3 S 27.3 [8.3] 3,363 [1,526.8] 2013127 2013202

3,142 2,617 135.3 S 27.3 [8.3] 3,363 [1,526.8] 2013128 2013203

4,220 3,515 100.8 S 27.3 [8.3] 3,363 [1,526.8] 2013129 2013204

750

2,212

625

1,843 206.0 LT 28.5 [8.7] 3,598 [1,633.5] 2001625 2013235

2,212 1,843 206.0 S 28.9 [8.8] 3,598 [1,633.5] 2013343 2013349

3,367 2,805 135.3 S 28.9 [8.8] 3,598 [1,633.5] 2009859 2013205

3,943 3,285 115.5 S 28.9 [8.8] 3,598 [1,633.5] 2013130 2013206

Page 333: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | REDA Maximus ESP System Motors 332

738 Series Motor738 Series Maximus ESP System Motor—RK Type with Integral Phoenix Downhole Monitoring Systems Adapter (Continued)Frequency 60 Hz Frequency 50 Hz

Current, A TypeLength, ft [m]

Weight, lbm [kg]

Carbon Steel Part Number

Redalloy Alloy Part Number

Power Rating, hp Voltage, V

Power Rating, hp Voltage, V

800

2,360

666

1,966 205.9 S 30.6 [9.3] 3,832 [1,739.7] 2013344 2013350

2,975 2,478 163.3 S 30.6 [9.3] 3,832 [1,739.7] 2013131 2013207

3,591 2,991 135.3 S 30.6 [9.3] 3,832 [1,739.7] 2013132 2013208

850

2,507

708

2,088 206.0 S 32.2 [9.8] 4,066 [1,846.0] 2013345 2013351

3,161 2,633 163.3 S 32.2 [9.8] 4,066 [1,846.0] 2013133 2013209

3,815 3,178 135.3 S 32.2 [9.8] 4,066 [1,846.0] 2013134 2013210

9003,347

7502,788 163.3 S 33.8 [10.3] 4,300 [1,952.2] 2013135 2013212

4,040 3,365 135.3 S 33.8 [10.3] 4300, [1,952.2] 2006498 2013211

Page 334: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | REDA Maximus ESP System ProMotor Units 333

REDA Maximus System ProMotor Unit BSL Type, 387/456, Integral Pressure Sensor, RSPD Type

Frequency 60 Hz Frequency 50 Hz

Amperage, A Type Length, ft [m] Weight, lbm [kg]Carbon Steel Part NumberHorsepower, hp Volts, V Horsepower, hp Volts, V

30483

25402 41.8

BSL-S

12.1 [3.7] 395 [180] tba†

750 625 26.9 tba

38603

31502 41.9

13.0 [4.0] 435 [198]tba

937 781 26.9 tba

45

457

38

380 66.4

13.7 [4.2] 470 [214]

tba

858 715 35.3 tba

991 826 30.6 tba

53

689

44

574 51.3

14.6 [4.5] 500 [227]

tba

768 640 46.0 tba

1,000 833 35.3 tba

1,156 963 30.6 tba

60

787

50

655 51.4

15.3 [4.7] 545 [248]

tba

965 804 41.9 tba

1,143 952 35.3 tba

1,499 1,249 26.9 tba

68886

56738 51.3

16.2 [4.9] 575 [261]tba

1,286 1,072 35.3 tba

75

983

63

820 51.3

16.9 [5.2] 610 [227]

tba

1,207 1,006 41.8 tba

1,540 1,283 32.8 tba

1,874 1,562 26.9 tba

83

837

69

698 66.3

17.8 [5.4] 650 [295]

tba

960 800 57.8 tba

1,327 1,106 41.9 tba

2,063 1,719 26.9 tba

90

913

75

761 66.4

18.5 [5.6] 690 [314]

tba

1,581 1,317 38.3 tba

1,982 1,652 30.6 tba

2,248 1,874 26.9 tba

98

990

81

825 66.3

19.4 [5.9] 725 [330]

tba

1,279 1,066 51.3 tba

1,859 1,549 35.3 tba

2,148 1,790 30.6 tba

105 1,065

88

887 66.4

BSL-S

20.1 [6.1] 760 [345]

100178621

1,533 1,278 46.1 100178623

2,156 1,797 32.8 100176037

2,312 1,927 30.6 100178624

113 975

94

812 77.7

21.0 [6.4] 790 [359]

100176051

1,476 1,230 51.3 100176060

2,145 1,788 35.3 100176064

120 1,040

100

866 77.7

21.7 [6.6] 835 [380]

100176082

1,573 1,311 51.4 100176087

2,286 1,905 35.3 100176091

2,642 2,202 30.6 100178644† To be assigned.

REDA Maximus ESP System ProMotor Units

Page 335: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | REDA Maximus ESP System ProMotor Units 334

REDA Maximus System ProMotor Unit BSL Type, 387/456, Integral Pressure Sensor, RSPD Type

Frequency 60 Hz Frequency 50 Hz

Amperage, A Type Length, ft [m] Weight, lbm [kg]Carbon Steel Part NumberHorsepower, hp Volts, V Horsepower, hp Volts, V

128

1,104

106

920 77.7

BSL-S

22.6 [875] 875 [398]

tba†

1,295 1,079 66.3 tba

1,484 1,237 57.8 tba

2,242 1,868 38.3 tba

135

1,169

113

974 77.7

23.3 [7.1] 920 [418]

tba

1,570 1,308 57.9 tba

2,170 1,809 41.9 tba

2,772 2,310 32.8 tba

143

1,870

119

1,558 51.3

24.2 [7.4] 960 [436]

tba

2,294 1,911 41.8 tba

2,506 2,088 38.3 tba

150

1,299

125

1,083 77.7

24.9 [7.6] 995 [452]

tba

1,745 1,454 57.9 tba

1,967 1,639 51.3 tba

2,413 2,011 41.8 tba

1582,066

1311,722 51.3

25.8 [7.9] 1,030 [468]tba

2,300 1,917 46.1 tba

165

1,429

138

1,191 77.7

26.6 [8.1] 1,070 [486]

tba

1,918 1,599 57.9 tba

2,164 1,803 51.3 tba

2,899 2,415 38.3 tba

180

1,559

150

1,299 77.7

28.2 [8.6] 1,145 [520]

tba

2,360 1,966 51.4 tba

2,628 2,190 46.1 tba

210 2,446 175 2,039 57.8 31.4 [9.6] 1,310 [595] tba† To be assigned.

REDA Maximus ESP System ProMotor Units

Page 336: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | REDA Maximus ESP System ProMotor Units 335

REDA Maximus ESP System ProMotor UnitsREDA Maximus System ProMotor Unit BSL Type, 387/456, RSPD Type

Frequency 60 Hz Frequency 50 Hz

Amperage, A Type Length, ft [m] Weight, lbm [kg]Carbon Steel Part NumberHorsepower, hp Volts, V Horsepower, hp Volts, V

53 1,000 44 833 35.3

BSL-S

13.3 [4.1] 500 [227] 100190850

60 1,143 50 952 35.3 14.0 [4.3] 545 [248] 100190856

68 886 56 738 51.3 14.9 [4.5] 575 [261] 100190510

83 837 69 698 66.3 16.5 [5.0] 650 [295] 100190511

90913

75761 66.4

17.2 [5.2] 690 [314]100190512

1,581 1,317 38.3 100190861

113 1,476 94 1,230 51.3 19.7 [6.0] 790 [359] 100190865

1201,040

100866 77.7

20.4 [6.2] 835 [380]100190513

1,573 1,311 51.4 100190867

1351,370

1131,141 66.3

22.0 [6.7] 920 [418]100190514

2,170 1,809 41.9 100201323

158 2,066 131 1,722 51.3 24.6 [7.5]1,070 [486]

100201332

165 2,899 138 2,415 38.3 25.3 [7.7] 100190868

1802,360

1501,966 51.4

26.9 [8.2] 1,145 [520]100201340

2,628 2,190 46.1 100190515

REDA Maximus System ProMotor Unit BSL Type, 387/456, RSPD Type

Frequency 60 Hz Frequency 50 Hz

Amperage, A Type Length, ft [m] Weight, lbm [kg]Carbon Steel Part NumberHorsepower, hp Volts, V Horsepower, hp Volts, V

1951,689

1631,407 77.7

BPBSL-S

32.0 [9.8] 1,260 [573]100178670

2,847 2,372 46.1 100178675

2102,446

1752,039 57.8

33.6 [10.2] 1,335 [607]100178678

2,753 2,294 51.3 100178677

2251,948

1881,623 77.8

35.2 [10.7] 1,410 [641]100178695

2,950 2,459 51.3 100178687

REDA Maximus System ProMotor Unit BPBSL Type, 387/456, RSPD Type

Frequency 60 Hz Frequency 50 Hz

Amperage, A Type Length, ft [m] Weight, lbm [kg]

Carbon Steel

Part Number

Redalloy* High-Nickel Alloy Part NumberHorsepower, hp Volts, V Horsepower, hp Volts, V

1951,689

1631,407 77.7

BPBSL-S

30.7 [9.4] 1,260 [573]tba† 100203451

2,847 2,372 46.1 tba 100203452

2102,446

1752,039 57.8

32.3 [9.8] 1,335 [607]tba 100203455

2,753 2,294 51.3 tba 100203454

2251,948

1881,623 77.8

35.2 [10.7] 1,410 [641]100201348 tba

2,950 2,459 51.3 100201347 tba† To be assigned.

Page 337: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | REDA Maximus ESP System ProMotor Units 336

REDA Maximus ESP System ProMotor UnitsREDA Maximus System ProMotor Unit BPBSL Type, 387/456, Upper Tandem, RSPD Type

Frequency 60 Hz Frequency 50 Hz

Amperage, A Type Length, ft [m] Weight, lbm [kg]Carbon Steel Part Number

Redalloy Part NumberHorsepower, hp Volts, V Horsepower, hp Volts, V

120

1,040

100

866 77.7

BPBSL-UT

22.8 [7.0] 875 [398]

100179093 100213488

1,573 1,311 51.4 100210573 100213489

2,286 1,905 35.3 100210575 100213491

2,642 2,202 30.6 100210574 100213490

135

1,169

113

974 77.7

24.4 [7.4] 960 [436]

100179080 100213492

1,370 1,141 66.4 100210578 100213496

1,570 1,308 57.9 100210576 100213494

2,170 1,809 41.9 100210581 100213497

150

1,299

125

1,083 77.7

26.0 [7.9] 1,035 [470]

100179076 100213498

1,745 1,454 57.9 100210539 100213500

1,967 1,639 51.3 100210544 100213502

2,413 2,011 41.8 100210543 100213501

165

1,184

138

987 93.7

27.7 [8.4] 1,110 [505]

100136075 100213507

1,429 1,191 77.7 100131666 100213503

1,918 1,599 57.9 100210549 100213505

2,164 1,803 51.3 100210550 100213506

2,899 2,415 38.3 100210547 100213504

1801,559

1501,299 77.7

29.3 [8.9] 1,185 [539]100179054 100213508

2,360 1,966 51.4 100210554 100213510

1951,689

1631,407 77.7

30.9 [9.4] 1,260 [573]100125484 100213513

2,847 2,372 46.1 100210566 100213514

2102,446

1752,039 57.8

32.5 [9.9] 1,335 [607]100210569 100213516

2,753 2,294 51.3 100210568 100213515

2251,948

1881,623 77.8

34.1 [10.4] 1,410 [641]100099091 100213519

2,950 2,459 51.3 100210572 100213574

REDA Maximus System ProMotor Unit LSBPB Type, 387/456, Upper Tandem, RSPD Type

Frequency 60 Hz Frequency 50 Hz

Amperage, A Type Length, ft [m] Weight, lbm [kg]Carbon Steel Part Number

Redalloy* High-Nickel Alloy Part NumberHorsepower, hp Volts, V Horsepower, hp Volts, V

120

1,040

100

866 77.7

LSBPB-UT

22.8 [7.0] 875 [398]

100234693 100235365

1,573 1,311 51.4 100234946 100235366

2,286 1,905 35.3 100234948 100235369

2,642 2,202 30.6 100234947 100235367

135

1,169

113

974 77.7

24.4 [7.4] 960 [436]

100234949 100235370

1,370 1,141 66.4 100234953 100235374

1,570 1,308 57.9 100234951 100235371

2,170 1,809 41.9 100234954 100235375

2,772 2,310 32.8 100234952 100235373

150

1,299

125

1,083 77.7

26.0 [7.9] 1,035 [470]

100234955 100235388

1,745 1,454 57.9 100234956 100235389

1,967 1,639 51.3 100234959 100235396

2,413 2,011 41.8 100234957 100235390

Page 338: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | REDA Maximus ESP System ProMotor Units 337

REDA Maximus ESP System ProMotor Units

REDA Maximus System Motor, 387/456, Lower Tandem, Integral Sensor, RSPD Type

Frequency 60 Hz Frequency 50 Hz

Amperage, A Type Length, ft [m] Weight, lbm [kg]Carbon Steel Part Number

Redalloy* High-Nickel Alloy Part NumberHorsepower, hp Volts, V

Horsepower, hp Volts, V

120

1,040

100

866 77.7

LT

16.4 [5.0] 715 [325]

tba† tba1,573 1,311 51.4 tba tba2,286 1,905 35.3 tba tba2,642 2,202 30.6 tba tba

135

1,169

113

974 77.7

18.0 [5.5] 800 [364]

tba tba1,370 1,141 66.4 tba tba1,570 1,308 57.9 tba tba2,170 1,809 41.9 tba tba2,772 2,310 32.8 tba tba

150

1,299

125

1,083 77.7

19.6 [6.0] 875 [398]

tba tba1,745 1,454 57.9 tba tba1,967 1,639 51.3 tba tba2,413 2,011 41.8 tba tba

165

1,184

138

987 93.7

21.2 [6.5] 950 [432]

tba tba1,429 1,191 77.7 tba tba1,918 1,599 57.9 tba tba2,164 1,803 51.3 tba tba2,899 2,415 38.3 tba tba

1801,559

1501,299 77.7

22.8 [7.0] 1,025 [466]tba tba

2,360 1,966 51.4 tba tba2,628 2,190 46.1 tba tba

1951,689

1631,407 77.7

24.4 [7.4] 1,100 [500]tba tba

2,847 2,372 46.1 tba tba210 2,753 175 2,294 51.3 26.0 [7.9] 1,175 [534] tba tba225 1,948 188 1,623 77.8 27.6 [8.4] 1,250 [568] tba tba† To be assigned.

REDA Maximus System ProMotor Unit LSBPB Type, 387/456, Upper Tandem, RSPD Type (Continued)

Frequency 60 Hz Frequency 50 Hz

Amperage, A Type Length, ft [m] Weight, lbm [kg]Carbon Steel Part Number

Redalloy Part NumberHorsepower, hp Volts, V Horsepower, hp Volts, V

165

1,184

138

987 93.7

LSBPB-UT

27.7 [8.4] 1,110 [505]

100235026 100235406

1,429 1,191 77.7 100234961 100235397

1,918 1,599 57.9 100234963 100235404

2,164 1,803 51.3 100235025 100235405

2,899 2,415 38.3 100234962 100235398

180

1,559

150

1,299 77.7

29.3 [8.9] 1,185 [539]

100235031 100235414

2,360 1,966 51.4 100235027 100235415

2,628 2,190 46.1 100235028 100235416

1951,689

1631,407 77.7

30.9 [9.4] 1,260 [573]100235032 100235434

2,847 2,372 46.1 100235033 100235435

2102,446

1752,039 57.8

32.5 [9.9] 1,335 [607]100235035 100235439

2,753 2,294 51.3 100235034 100235436

2251,948

1881,623 77.8

34.1 [10.4] 1,410 [641]100235037 100235442

2,950 2,459 51.3 100235036 100235441

Page 339: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | REDA Maximus ESP System ProMotor Units 338

REDA Maximus ESP System ProMotor UnitsREDA Maximus System Motor, 387/456, Lower Tandem, RSPD Type

Frequency 60 Hz Frequency 50 Hz

Amperage, A Type Length, ft [m] Weight, lbm [kg]Carbon Steel Part Number

Redalloy* High-Nickel Alloy Part NumberHorsepower, hp Volts, V Horsepower, hp Volts, V

120

1,040

100

866 77.7

LT

15.0 [4.6] 700 [318]

100196418 100213556

1,573 1,311 51.4 100212430 100213557

2,286 1,905 35.3 100212432 100213559

2,642 2,202 30.6 100212431 100213558

135

1,169

113

974 77.7

16.7 [5.1] 785 [357]

100196420 100213560

1,370 1,370 66.4 100212435 100213563

1,570 1,570 57.9 100212433 100213561

2,170 2,170 41.9 100212436 100213564

2,772 2,772 32.8 100212434 100213562

150

1,299

125

1,083 77.7

18.3 [5.6] 860 [391]

100196424 100213565

1,745 1,745 57.9 100212437 100213567

1,967 1,967 51.3 100212439 100213569

2,413 2,413 41.8 100212438 100213568

165

1,184

138

987 93.7

19.9 [6.1] 935 [425]

100196428 100213580

1,429 1,191 77.7 100196426 100213570

1,918 1,599 57.9 100212443 100213578

2,164 1,803 51.3 100212444 100213579

2,899 2,415 38.3 100212441 100213571

180

1,559

150

1,299 77.7

21.5 [6.6] 1,010 [459]

100196432 100213581

2,360 1,966 51.4 100212445 100213582

2,628 2,190 46.1 100212446 100213586

1951,689

1631,407 77.7

23.1 [7.0] 1,085 [493]100196435 100213587

2,847 2,372 46.1 100212447 100213588

210 2,753 175 2,294 51.3 24.7 [7.5] 1,160 [527] 100212451 100213589

2251,948

1881,623 77.8

26.3 [8.0] 1,235 [561]100196438 100213592

2,950 2,459 51.3 100212452 100213591

Page 340: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | REDA Maximus ESP System ProMotor Units 339

REDA Maximus ESP System ProMotor UnitsREDA Maximus System ProMotor Unit BSL Type, 562 Series, Integral Pressure Sensor, RSPD Type

Frequency 60 Hz Frequency 50 Hz

Amperage, A Type Length, ft [m] Weight, lbm [kg]Carbon Steel Part NumberHorsepower, hp Volts, V Horsepower, hp Volts, V

38

506

31

422 47.3

BSL-S

12.0 [3.7] 691 [314]

tba†

822 685 29.1 tba

1,295 1,079 18.5 tba

56

473

47

394 75.9

13.2 [4.0] 779 [354]

tba

655 545 54.8 tba

774 645 46.3 tba

1,257 1,048 28.5 tba

75

539

63

449 88.8

14.1 [4.3] 843 [383]

tba

934 778 51.2 tba

1,328 1,106 36.0 tba

94

682

78

568 87.7

15.3 [4.7] 930 [423]

tba

882 735 67.8 tba

1,081 901 55.3 tba

1,381 1,150 43.3 tba

113

926

94

772 77.5

BSL-S

16.2 [4.9] 994 [452]

100237454

1,282 1,068 56.0 100223322

1,637 1,364 43.9 100237458

2,346 1,955 30.6 100237461

131

534

109

445 157.0

17.4 [5.3] 1,046 [475]

100237462

952 793 88.0 100237463

1,230 1,025 68.1 100237464

1,508 1,257 55.5 100237465

150

1,078

125

898 88.8

18.3 [5.6] 1,110 [505]

100237466

1,551 1,293 61.7 100237467

2,497 2,081 38.3 100237468

2,814 2,345 34.0 100237469

169

1,043

141

869 103.3

19.5 [5.9] 1,125 [511]

100237470

1,221 1,018 88.2 100237471

1,579 1,315 68.2 100237472

1,936 1,613 55.6 100237473† To be assigned.

Page 341: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | REDA Maximus ESP System ProMotor Units 340

REDA Maximus ESP System ProMotor Units

REDA Maximus System ProMotor Unit BPBSL Type, 562 Series, Integral Pressure Sensor, RSPD Type

Frequency 60 Hz Frequency 50 Hz

Amperage, A Type Length, ft [m] Weight, lbm [kg]Carbon Steel Part NumberHorsepower, hp Volts, V Horsepower, hp Volts, V

188

1,150

156

958 104.1

BPBSL-S

22.9 [7.0] 1,217 [553]

tba†

1,544 1,287 77.5 tba

2,530 2,108 47.3 tba

2,925 2,437 40.9 tba

3,517 2,931 34.0 tba

206

1,491

172

1,242 88.3

24.0 [7.3] 1,427 [649]

tba

1,927 1,606 68.3 tba

2,363 1,969 55.7 tba

225

1,381

188

1,150 104.0

24.9 [7.6] 1,491 [678]

tba

1,854 1,545 77.5 tba

2,327 1,939 61.7 tba

2,800 2,333 51.3 tba

263

1,334

219

1,112 125.5

27.0 [8.2] 1,634 [743]

tba

1,612 1,343 103.9 tba

1,887 1,572 88.8 tba

2,715 2,262 61.7 tba

300

1,525

250

1,271 125.5

29.1 [8.9] 1,776 [807]

tba

1,840 1,534 104.0 tba

2,472 2,060 77.4 tba

2,787 2,323 68.7 tba

† To be assigned

REDA Maximus System ProMotor Unit BSL Type, 562 Series, Integral Pressure Sensor, RSPD Type (Continued)

Frequency 60 Hz Frequency 50 Hz

Amperage, A Type Length, ft [m] Weight, lbm [kg]Carbon Steel Part NumberHorsepower, hp Volts, V Horsepower, hp Volts, V

113

926

94

772 77.5

BSL-S

16.2 [4.9] 994 [452]

tba†

1,282 1,068 56.0 tba

1,637 1,364 43.9 tba

2,346 1,955 30.6 tba

131

534

109

445 157.0

17.4 [5.3] 1,046 [475]

tba

952 793 88.0 tba

1,230 1,025 68.1 tba

1,508 1,257 55.5 tba

150

1,078

125

898 88.8

18.3 [5.6] 1,110 [505]

tba

1,551 1,293 61.7 tba

2,497 2,081 38.3 tba

2,814 2,345 34.0 tba

169

1,043

141

869 103.3

19.5 [5.9] 1,125 [511]

tba

1,221 1,018 88.2 tba

1,579 1,315 68.2 tba

1,936 1,613 55.6 tba† To be assigned

Page 342: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | REDA Maximus ESP System ProMotor Units 341

REDA Maximus ESP System ProMotor Units

REDA Maximus System ProMotor Unit BPBSL Upper Tandem Type, 562 Series, RSPD Type

Frequency 60 Hz Frequency 50 Hz

Amperage, A Type

Length,

ft [m]

Weight,

lbm [kg]

Carbon Steel

Part NumberHorsepower, hp Volts, V Horsepower, hp Volts, V

188

1,150

156

958 104.1

BPBSL-UT

22.9 [7.0] 1,217 [553]

100236659

1,544 1,287 77.5 100236655

2,530 2,108 47.3 100236656

2,925 2,437 40.9 100236657

3,517 2,931 34.0 100236658

225

1,381

188

1,150 104.0

24.9 [7.6] 1,491 [678]

100236660

1,854 1,545 77.5 100236661

2,327 1,939 61.7 100236662

2,800 2,333 51.3 100236663

263

1,334

219

1,112 125.5

27.0 [8.2] 1,634 [743]

100236664

1,612 1,343 103.9 100145975

1,887 1,572 88.8 100147598

2,715 2,262 61.7 100236665

300

1,525

250

1,271 125.5

29.1 [8.9] 1,776 [807]

100236666

1,840 1,534 104.0 100236669

2,472 2,060 77.4 100236667

2,787 2,323 68.7 100236668

338

1,716

281

1,430 125.5

31.2 [9.5] 1,919 [872]

100119228

2,070 1,725 104.0 100236670

2,781 2,317 77.4 100236671† To be assigned

REDA Maximus System Motor, 562 Series, LT with Integral Pressure Sensor, RSPD Type

Frequency 60 Hz Frequency 50 Hz

Amperage, A Type

Length,

ft [m]

Weight,

lbm [kg]

Carbon Steel

Part NumberHorsepower, hp Volts, V Horsepower, hp Volts, V

113 1,045 94 871 68.4

LT

10.4 [3.2] 686 [312] tba†

188

1,150

156

958 104.1

14.5 [4.4] 989 [450]

tba

1,544 1,287 77.5 tba

2,530 2,108 47.3 tba

2,925 2,437 40.9 tba

3,517 2,931 34.0 tba

REDA Maximus System ProMotor Unit BPBSL Type, 562 Series, Integral Pressure Sensor, RSPD Type (Continued)

Frequency 60 Hz Frequency 50 Hz

Amperage, A Type Length, ft [m] Weight, lbm [kg]Carbon Steel Part NumberHorsepower, hp Volts, V Horsepower, hp Volts, V

338

1,716

281

1,430 125.5

BPBSL-S 31.2 [9.5] 1,919 [872]

tba†

2,070 1,725 104.0 tba

2,781 2,317 77.4 tba† To be assigned

Page 343: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | REDA Maximus ESP System ProMotor Units 342

REDA Maximus ESP System ProMotor Units

REDA Maximus System ProMotor Unit BSL Type, 456 Series, MaxJoint* ESP Flange Connection Technology

Frequency 60 Hz Frequency 50 Hz

Amperage, A Type Length, ft [m] Weight, lbm [kg]Carbon Steel Part NumberHorsepower, hp Volts, V Horsepower, hp Volts, V

30463

25386 42.3

BSL-S

11.0 [3.4] 395 [180]100360547

719 599 27.2 100361297

38578

31482 42.5

11.9 [3.6] 435 [198]100361303

899 749 27.3 100361305

45

438

38

365 67.1

12.6 [3.8] 470 [214]

100361307

823 686 35.7 100361308

950 792 30.9 100361310

53

660

44

550 52.0

13.5 [4.1] 500 [227]

100361313

736 614 46.7 100361398

959 799 35.8 100361319

1,109 924 31.0 100361322

60

754

50

628 52.1

14.2 [4.3] 545 [248]

100361400

925 771 42.3 100361408

1,096 913 35.7 100361403

1,438 1,198 27.2 100361406

68849

56708 52.0

15.1 [4.6] 575 [261]100361412

1,233 1,027 35.8 100361414

75

943

63

786 52.0

15.8 [4.8] 610 [227]

100361419

1,157 964 42.3 100361421

1,477 1,231 33.3 100361416

1,797 1,498 27.3 100361425† To be assigned

REDA Maximus System Motor, 562 Series, LT with Integral Pressure Sensor, RSPD Type

Frequency 60 Hz Frequency 50 Hz

Amperage, A Type Length, ft [m] Weight, lbm [kg]Carbon Steel Part NumberHorsepower, hp Volts, V Horsepower, hp Volts, V

225

1,381

225

1,150 104.0

LT

16.6 [5.1] 1,133 [515]

tba†

1,854 1,545 77.5 tba

2,327 1,939 61.7 tba

2,800 2,333 51.3 tba

263

1,334

219

1,112 125.5

18.7 [5.7] 1,290 [586]

tba

1,612 1,343 103.9 tba

1,887 1,572 88.8 tba

2,715 2,262 61.7 tba

300

1,525

250

1,271 125.5

20.8 [6.3] 1,419 [645]

tba

1,840 1,534 104.0 tba

2,472 2,060 77.4 tba

2,787 2,323 68.7 tba

338

1,716

281

1,430 125.5

22.9 [7.0] 1,600 [727]

tba

2,070 1,725 104.0 tba

2,781 2,317 77.4 tba† To be assigned

Page 344: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Technology Catalog | ESP Motors 343

REDA Maximus ESP System ProMotor Units

REDA Maximus System ProMotor Unit BSL Type, 456 Series, MaxJoint Technology

Frequency 60 Hz Frequency 50 Hz

Amperage, A Type Length, ft [m] Weight, lbm [kg]Carbon Steel Part NumberHorsepower, hp Volts, V Horsepower, hp Volts, V

120

997

100

831 78.6

BSL-S

20.6 [6.3] 835 [380]

100361498

1,508 1,257 52.0 100361500

2,192 1,826 35.8 100361508

2,533 2,111 30.9 100361506

128

1,059

106

882 78.9

21.5 [6.6] 875 [398]

100361509

1,241 1,035 67.3 100361511

1,423 1,186 58.7 100361513

2,150 1,791 38.8 100361516

135

1,121

113

934 78.9

22.2 [6.8] 920 [418]

100361519

1,505 1,254 58.7 100361523

2,081 1,734 42.5 100361562

2,658 2,215 33.3 100361527

143

1,184

119

987 78.8

23.1 [7.0] 960 [436]

100361574

1,793 1,494 52.0 100361569

2,199 1,833 42.5 100361570

2,403 2,002 38.8 100361573

REDA Maximus System ProMotor Unit BSL Type, 456 Series, MaxJoint Technology (Continued)

Frequency 60 Hz Frequency 50 Hz

Amperage, A Type Length, ft [m] Weight, lbm [kg]Carbon Steel Part NumberHorsepower, hp Volts, V Horsepower, hp Volts, V

83

803

69

669 67.3

BSL-S

16.7 [5.1] 650 [295]

100361428

921 767 58.7 100361438

1,272 1,060 42.5 100361434

1,978 1,648 27.3 100361437

90

875

75

730 67.4

17.4 [5.3] 690 [314]

100361440

1,516 1,263 38.7 100361442

1,901 1,584 31.0 100361447

2,156 1,797 27.2 100361445

98

949

81

791 67.3

18.3 [5.6] 725 [330]

100361449

1,227 1,022 52.0 100361451

1,782 1,485 35.8 100361457

2,060 1,717 31.0 100361455

105

1,021

88

851 67.1

19.0 [5.8] 760 [345]

100361459

1,470 1,225 46.6 100361461

2,067 1,723 33.3 100361464

2,217 1,848 30.9 100361620

113

935

94

779 78.9

19.9 [6.1] 790 [359]

100361485

1,415 1,180 52.0 100361491

2,057 1,714 35.8 100361492

Page 345: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | REDA Maximus ESP System ProMotor Units 344

REDA Maximus ESP System ProMotor Units

REDA Maximus System ProMotor Unit BSL Type, 456 Series, MaxJoint Technology

Frequency 60 Hz Frequency 50 Hz

Amperage, A Type Length, ft [m] Weight, lbm [kg]

Carbon Steel with Monel® Trim Part Number

Redalloy* High-Nickel Alloy with Monel Trim Part NumberHorsepower, hp Volts, V Horsepower, hp Volts, V

30463

25386 42.3

BSL-S

11.0 [3.4] 395100360577 100360589

719 599 27.2 100361628 100361859

38578

31482 42.5

11.9 [3.6] 435100361630 100361860

899 749 27.3 100361632 100361861

45

438

38

365 67.1

12.6 [3.8] 470

100361634 100361862

823 686 35.7 100361635 100361863

950 792 30.9 100361636 100361864

53

660

44

550 52.0

13.5 [4.1] 500

100361638 100361865

736 614 46.7 100361642 100361868

959 799 35.8 100361639 100361866

1,109 924 31.0 100361641 100361867

60

754

50

628 52.1

14.2 [4.3] 545

100361644 100361869

925 771 42.3 100361649 100361872

1,096 913 35.7 100361645 100361870

1,438 1,198 27.2 100361647 100361871

68849

56708 52.0

15.1 [4.6] 575100361651 100361873

1,233 1,027 35.8 100361652 100361874

75

943

63

786 52.0

15.8 [4.8] 610

100361655 100361876

1,157 964 42.3 100361657 100361877

1,477 1,231 33.3 100361653 100361875

1,797 1498 27.3 100361658 100361878

83

803

69

669 67.3

16.7 [5.1] 650

100361659 100361879

921 767 58.7 100361663 100361882

1,272 1,060 42.5 100361661 100361880

1,978 1,648 27.3 100361662 100361881

90

1,516

75

1,263 38.7

17.4 [5.3] 690

100361666 100361885

1,901 1,584 31.0 100361670 100361887

2,156 1,797 27.2 100361669 100361886

REDA Maximus System ProMotor Unit BSL Type, 456 Series, MaxJoint Technology (Continued)

Frequency 60 Hz Frequency 50 Hz

Amperage, A Type Length, ft [m] Weight, lbm [kg]Carbon Steel Part NumberHorsepower, hp Volts, V Horsepower, hp Volts, V

150

1,246

125

1,038 78.6

BSL-S

23.8 [7.3] 995 [452]

100361575

1,673 1,394 58.7 100361577

1,886 1,572 52.1 100361582

2,314 1,928 42.3 100361580

1581,981

1311,651 52.0

24.7 [7.5] 1,030 [468]100361585

2,205 1,838 46.8 100361587

165 1,370 138 1,142 78.6 25.4 [7.7] 1,070 [486] 100361589

1801,495

1501,245 78.9

27.0 [8.2] 1,145 [520]100361601

2,520 2,100 46.6 100361605

Page 346: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | REDA Maximus ESP System ProMotor Units 345

REDA Maximus ESP System ProMotor UnitsREDA Maximus System ProMotor Unit BSL Type, 456 Series, MaxJoint Technology (Continued)

Frequency 60 Hz Frequency 50 Hz

Amperage, A Type Length, ft [m]Weight, lbm [kg]

Carbon Steel with MONEL® Trim Part Number

Redalloy* High-Nickel Alloy with MONEL Trim Part NumberHorsepower, hp Volts, V Horsepower, hp Volts, V

98

949

81

791 67.3

BSL-S

18.3 [5.6] 725

100361671 100361888

1,227 1,022 52.0 100361672 100361889

1,782 1,485 35.8 100361676 100361891

2,060 1,717 31.0 100361674 100361890

105

1,021

88

851 67.1

19.0 [5.8] 760

100361677 100361893

1,470 1,225 46.6 100361679 100361894

2,067 1,723 33.3 100361681 100361896

2,217 1,848 30.9 100361680 100361895

113

935

94

779 78.9

19.9 [6.1] 790

100361683 100361897

1,415 1,180 52.0 100361688 100361898

2,057 1,714 35.8 100361689 100361899

Page 347: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | REDA Maximus ESP System ProMotor Units 346

REDA Maximus ESP System ProMotor UnitsREDA Maximus System ProMotor Unit BSL Type, 456 Series, MaxJoint Technology

Frequency 60 Hz Frequency 50 Hz

Amperage, A Type Length, ft [m] Weight, lbm [kg]

Carbon Steel with Monel® Trim Part Number

Redalloy* High-Nickel Alloy with Monel Trim Part NumberHorsepower, hp Volts, V Horsepower, hp Volts, V

120

997

100

831 78.6

BSL-S

20.6 [6.3] 835 [380]

100361690 100361900

1,508 1,257 52.0 100361692 100361901

2,192 1,826 35.8 100361694 100361903

2,533 2,111 30.9 100361693 100361902

128

1,059

106

882 78.9

21.5 [6.6] 875 [398]

100361695 100361904

1,241 1,035 67.3 100361696 100361905

1,423 1,186 58.7 100361698 100361906

2,150 1,791 38.8 100361699 100361907

135

1,121

113

934 78.9

22.2 [6.8] 920 [418]

100361701 100361908

1,505 1,254 58.7 100361702 100361909

2,081 1,734 42.5 100361706 100361910

2,658 2,215 33.3 100361703 100361912

143

1,184

119

987 78.8

23.1 [7.0] 960 [436]

100361713 100361916

1,793 1,494 52.0 100361707 100361913

2,199 1,833 42.5 100361709 100361914

2,403 2,002 38.8 100361711 100361915

150

1,246

125

1,038 78.6

23.8 [7.3] 995 [452]

100361714 100361917

1,673 1,394 58.7 100361715 100361918

1,886 1,572 52.1 100361717 100361920

2,314 1,928 42.3 100361716 100361919

158

1,981 131

1,651 52.024.7 [7.5] 1,030 [468]

100361718 100361921

2,205 1,838 46.8 100361719 100361922

165

1,370

138

1,142 78.6

25.4 [7.7]

1,070 [486]

1,070 [486]

1,070 [486]

100361720 100361923

1,839 1,533 58.8 100361728 100361925

2,075 1,729 52.1 100361729 100361926

2,779 2,316 38.7 100361725 100361924

180

1,495

150

1,245 78.9

27.0 [8.2] 1,145 [520]

100361731 100361927

2,262 1,885 52.0 100361732 100361928

2,520 2,100 46.6 100361733 100361929

REDA Maximus System ProMotor Unit BPBSL Type, 456 Series, MaxJoint Technology

Frequency 60 Hz Frequency 50 HzAmperage, A Type Length, ft [m] Weight, lbm [kg]

Carbon Steel Part NumberHorsepower, hp Volts, V Horsepower, hp Volts, V

1951,619

162.51,349 78.6

BPBSL-S

30.9 [9.4] 1,260 [573]100361942

2,730 2,275 46.6 100361943

2102,346

1751,955 58.7

32.5 [9.9] 1,335 [607]100361945

2,640 2,200 52.0 100361944

2251,868

1881,557 78.9

34.1 [10.4] 1,410 [641]100361947

2,829 2,357 52.0 100361946

Page 348: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | REDA Maximus ESP System ProMotor Units 347

REDA Maximus ESP System ProMotor Units

REDA Maximus System ProMotor Unit BPBSL Type, 456 Series, Upper Tandem, MaxJoint Technology

Frequency 60 Hz Frequency 50 HzAmperage, A Type Length, ft [m] Weight, lbm [kg]

Carbon Steel Part NumberHorsepower, hp Volts, V Horsepower, hp Volts, V

120

997

100

831 78.6

BPBSL-UT

23.0 [7.0] 875 [398]

100351312

1,508 1,257 52.0 100351313

2,192 1,826 35.8 100351315

2,533 2,111 30.9 100351314

135

1,121

113

934 78.9

24.6 [7.5] 960 [436]

100351316

1,313 1,094 67.4 100351319

1,505 1,254 58.7 100351317

2,081 1,734 42.5 100351320

2,658 2,215 33.3 100351318

150

1,246

125

1,038 78.6

26.2 [8.0] 1,035 [470]

100351321

1,673 1,394 58.7 100351322

1,886 1,572 52.1 100351324

2,314 1,928 42.3 100351323

165

1,370

138

1,142 78.6

27.8 [8.5] 1,110 [505]

100351325

1,839 1,533 58.8 100351327

2,075 1,729 52.1 100351328

2,075 1,729 93.7 100351329

2,779 2,316 38.7 100351326

180

1,495

150

1,245 78.9

BPBSL-UT 29.4 [9.0] 1,185 [539]

100351330

2,262 1,885 52.0 100351331

2,520 2,100 46.6 100351332

REDA Maximus System ProMotor Unit BPBSL Type, 456 Series, MaxJoint Technology

Frequency 60 Hz Frequency 50 Hz

Amperage, A Type Length, ft [m] Weight, lbm [kg]

Carbon Steel with MONEL® Trim Part Number

Redalloy* High-Nickel Alloy with MONEL Trim Part NumberHorsepower, hp Volts, V Horsepower, hp Volts, V

1951,619

162.51,349 78.6

BPBSL-S

30.9 [9.4] 1,260 [573]100361948 100361954

2,730 2,275 46.6 100361949 100361955

2102,346

1751,955 58.7

32.5 [9.9] 1,335 [607]100361951 100361957

2,640 2,200 52.0 100361950 100361956

2251,868

1881,557 78.9

34.1 [10.4] 1,410 [641]100361953 100361959

2,829 2,357 52.0 100361952 100361958

Page 349: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | REDA Maximus ESP System ProMotor Units 348

REDA Maximus ESP System ProMotor UnitsREDA Maximus System ProMotor Unit BPBSL Type, 456 Series, Upper Tandem, MaxJoint Technology

Frequency 60 Hz Frequency 50 Hz

Amperage, A Type Length, ft [m] Weight, lbm [kg]

Carbon Steel w/Monel Trim Part Number

Redalloy* High-Nickel Alloy w/Monel Trim Part NumberHorsepower, hp Volts, V Horsepower, hp Volts, V

120

997

100

831 78.6

BPBSL-UT

23.0 [7.0] 875 [398]

100362331 100351342

1,508 1,257 52.0 100362332 100351343

2,192 1,826 35.8 100362334 100351345

2,533 2,111 30.9 100362333 100351344

135

1,121

113

934 78.9

24.6 [7.5] 960 [436]

100351339 100351346

1,313 1,094 67.4 100362337 100351349

1,505 1,254 58.7 100362335 100351347

2,081 1,734 42.5 100362338 100351350

2,658 2,215 33.3 100362336 100351348

150

1,246

125

1,038 78.6

26.2 [8.0] 1,035 [470]

100362339 100351351

1,673 1,394 58.7 100362340 100351352

1,886 1,572 52.1 100362342 100351354

2,314 1,928 42.3 100362341 100351353

165

1,370

138

1,142 78.6

27.8 [8.5] 1,110 [505]

100362343 100351355

1,839 1,533 58.8 100362345 100351357

2,075 1,729 52.1 100362346 100351358

2,075 1,729 93.7 100362347 100351359

2,779 2,316 38.7 100362344 100351356

180

1,495

150

1,245 78.9

29.4 [9.0] 1,185 [539]

100362348 100351360

2,262 1,885 52.0 100362349 100351361

2,520 2,100 46.6 100362350 100351362

Page 350: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | Surface Electrical Equipment 349

SpeedStar 519 SWD18-pulse, low-voltage sine wave variable speed drive

SpeedStar 519 SWD* Variable Speed Drive (VSD) SpecificationsControl system Flux-vector PWM, V/Hz control

Input supply 380–480 V ±10%, 50/60 Hz ±2 Hz

Output voltage regulation Same as power supply

Frequency setting 0.01 to 90 Hz, 0.01-Hz resolution

Non-SWD (PWM) 0.5 to 3.0 kHz (user adjustable) carrier frequency

Sine wave drive VSD 2.2-kHz carrier frequency fixed

Input configuration 18-pulse integral phase shifting transformer with diode front end

Inverter efficiency > 97% at full load

Power factor > 0.98 at full load

Overload rating 120% for 60 s; 100% continuous

Certification and standards UL-508

SpeedStar 519 SWD VSD Enclosure and Environmental RatingsEnclosure rating NEMA 1 (indoor)† or NEMA 3R (outdoor) or IP-56 (optional)

Electronic section Sealed from outside air and cooled by heat exchanger

Transformer section Forced air cooled (automatic internal and external fans)

Maximum altitude, ft [m] 4,921 [1,500] above sea level; output rating derated above maximum altitude

Ambient operating temperature, degF [degC] –22 to 122 [–30 to 50]; output rating derated above upper temperature

Ambient storage temperature, degF [degC] –40 to 140 [–40 to 60]

Relative humidity 20 to 95% maximum (noncondensing)

H2S protection Uses conformal coated circuit boards and tin-plated bus bars

Material 12-gauge carbon steel enclosure‡† Dimensions and specifications provided on request ‡ Stainless steel provided on request

Page 351: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | Surface Electrical Equipment 350

SpeedStar 2000 Plus & SpeedStar SWDVariable speed drives

SpeedStar 2000 Plus* Variable Speed Drive (VSD) and SpeedStar SWD* VSD Specifications

Control system Flux-vector PWM, V/Hz control

Input supply 380 to 480 V ±10%, 50 or 60 Hz ±5%

Output voltage regulation Same as power supply

Frequency setting 0.01 to 120 Hz, 0.1-Hz resolution

PWM carrier frequency (user-adustable)

SpeedStar 2000 Plus VSD: 0.5 to 3.0 kHz SpeedStar SWD VSD: 2.2 kHz

Input configuration Diode, 6- or 12-pulse

Efficiency >98% at full load

Power factor >0.97 at full load

Overload rating 120% for 60 s, 100% continuous

Certification and standards compliance

UL-508, CE (with addition of electromagnetic interference filter at drive input)

SpeedStar 2000 Plus VSD and SpeedStar SWD VSD Environmental Ratings

Enclosure rating NEMA 1 (indoor) or NEMA 3R (outdoor)

Cooling method Electronic section: sealed from outside air (NEMA 4 section) and cooled by heat exchanger Sine wave filter section: air–cooled

Max. altitude, ft [m] 3,280 [1,000] above sea level; output rating derated above upper temperature

Ambient operating temperature, degF [degC]

–22 to 122 [–30 to 50]; output rating derated above upper tempera-ture

Ambient storage temperature, degF [degC]

–40 to 140 [–40 to 60]

Relative humidity 20% to 95% maximum (noncondensing)

H2S protection Conformal-coated circuit boards and tin-plated bus bars

Material 12-gauge carbon steel enclosure†

† Stainless steel available on request

SpeedStar 2000 Plus VSD and SpeedStar SWD VSD 6- and 12-Pulse Specifications

Output Rating Ambient Temperature Rating, degF [degC]

SpeedStar 2000 Plus VSD Dimensions (H × W × D), in [cm]

SpeedStar 2000 Plus VSD Approximate Weight, lbm [kg]

SpeedStar SWD VSD Dimensions (H × W × D), in [cm]

SpeedStar SWD VSD Approximate Weight, lbm [kg]A kVA

at 480 V

kVA at 380 V

NEMA 3R NEMA 1 NEMA 3R NEMA 1

79 66 52 122 [50] 81.50 × 25.00 × 35.00 [207 × 63.5 × 89]

81.50 × 25.06 × 33.00 [207 × 63.7 × 83.4]

1,000 [453.6]

na† na na

100 83 66 122 [50] 81.50 × 25.00 × 35.00 [207 × 63.5 × 89]

81.50 × 25.06 × 33.00 [207 × 63.7 × 83.4]

1,000 [453.6]

na na na

132 110 87 122 [50] 81.50 × 25.00 × 35.00 [207 × 63.5 × 89]

81.50 × 25.06 × 33.00 [207 × 63.7 × 83.4]

1,000 [453.6]

99.50 × 25.00 × 35.00 [252.7 × 63.5 × 89]

99.50 × 25.06 × 33.00 [252.7 × 63.7 × 83.4]

1,500 [680]

156 130 103 122 [50] 81.50 × 31.50 × 35.00 [207 × 80 × 89]

81.50 × 25.06 × 33.00 [207 × 63.7 × 83.4]

1,000 [453.6]

99.50 × 31.50 × 35.00 [252.7 × 80 × 89]

99.50 × 25.06 × 33.00 [252.7 × 63.7 × 83.4]

1,500 [680]

196 163 129 122 [50] 81.50 × 31.50 × 35.00 [207 × 80 × 89]

81.50 × 25.06 × 33.00 [207 × 63.7 × 83.4]

1,000 [453.6]

99.50 × 31.50 × 35.00 [252.7 × 80 × 89]

99.50 × 25.06 × 33.00 [252.7 × 63.7 × 83.4]

1,500 [680]

241 200 158 122 [50] 81.50 × 31.50 × 35.00 [207 × 80 × 89]

81.50 × 25.06 × 33.00 [207 × 63.7 × 83.4]

1,000 [453.6]

99.50 × 31.50 × 35.00 [252.7 × 80 × 89]

99.50 × 25.06 × 33.00 [252.7 × 63.7 × 83.4]

1,500 [680]

313 260 206 122 [50] 81.50 × 46.00 × 42.00 [207 × 117 × 107]

81.50 × 37.06 × 40.00 [207 × 94 × 101.6]

1,200 [544]

99.50 × 46.00 × 42.00 [252.7 × 117 × 107]

99.50 × 37.06 × 40.00 [252.7 × 94 × 101.6]

2,000 [907]

469 390 309 122 [50] 81.50 × 46.00 × 42.00 [207 × 117 × 107]

81.50 × 37.06 × 40.00 [207 × 94 × 101.6]

1,200 [544]

99.50 × 46.00 × 42.00 [252.7 × 117 × 107]

99.50 × 37.06 × 40.00 [252.7 × 94 × 101.6]

2,000 [907]

546 454 359 122 [50] 81.50 × 46.00 × 42.00 [207 × 117 × 107]

81.50 × 37.06 × 40.00 [207 × 94 × 101.6]

1,200 [544]

99.50 × 46.00 × 42.00 [252.7 × 117 × 107]

99.50 × 37.06 × 40.00 [252.7 × 94 × 101.6]

2,000 [907]

623 518 410 104 [40] 81.50 × 46.00 × 42.00 [207 × 117 × 107]

81.50 × 37.06 × 40.00 [207 × 94 × 101.6]

1,200 [544]

99.50 × 46.00 × 42.00 [252.7 × 117 × 107]

99.50 × 37.06 × 40.00 [252.7 × 94 × 101.6]

2,000 [907]

623 518 410 122 [50] 81.50 × 90.00 × 48.00 [207 × 229 × 122]

81.50 × 72.00 × 46.00 [207 × 183 × 117]

2,000 [907]

99.50 × 90.00 × 48.00 [252.7 × 229 × 122]

99.50 × 72.00 × 46.00 [252.7 × 183 × 117]

3,100 [1,406]

Page 352: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | Surface Electrical Equipment 351

SpeedStar 2000 Plus VSD and SpeedStar SWD VSD 6- and 12-Pulse Specifications (continued)

Output Rating Ambient Temperature Rating, degF [degC]

SpeedStar 2000 Plus VSD Dimensions (H × W × D), in [cm]

SpeedStar 2000 Plus VSD Approximate Weight, lbm [kg]

SpeedStar SWD VSD Dimensions (H × W × D), in [cm]

SpeedStar SWD VSD Approximate Weight, lbm [kg]A kVA

at 480 V

kVA at 380 V

NEMA 3R NEMA 1 NEMA 3R NEMA 1

722 600 475 122 [50] 81.50 × 90.00 × 48.00 [207 × 229 × 122]

81.50 × 72.00 × 46.00 [207 × 183 × 117]

2,000 [907]

99.50 × 90.00 × 48.00 [252.7 × 229 × 122]

99.50 × 72.00 × 46.00 [252.7 × 183 × 117]

3,100 [1,406]

842 700 554 122 [50] 81.50 × 90.00 × 48.00 [207 × 229 × 122]

81.50 × 72.00 × 46.00 [207 × 183 × 117]

2,000 [907]

99.50 × 90.00 × 48.00 [252.7 × 229 × 122]

99.50 × 72.00 × 46.00 [252.7 × 183 × 117]

3,100 [1,406]

980 815 645 122 [50] 81.50 × 90.00 × 48.00 [207 × 229 × 122]

81.50 × 72.00 × 46.00 [207 × 183 × 117]

2,000 [907]

99.50 × 90.00 × 48.00 [252.7 × 229 × 122]

99.50 × 72.00 × 46.00 [252.7 × 183 × 117]

3,100 [1,406]

1,121 932 738 122 [50] 81.50 × 90.00 × 48.00 [207 × 229 × 122]

81.50 × 72.00 × 46.00 [207 × 183 × 117]

2,000 [907]

99.50 × 90.00 × 48.00 [252.7 × 229 × 122]

99.50 × 72.00 × 46.00 [252.7 × 183 × 117]

5,000 [2,268]

1,203 1,000 792 122 [50] 81.50 × 90.00 × 48.00 [207 × 229 × 122]

81.50 × 72.00 × 46.00 [207 × 183 × 117]

2,000 [907]

99.50 × 90.00 × 48.00 [252.7 × 229 × 122]

99.50 × 72.00 × 46.00 [252.7 × 183 × 117]

5,000 [2,268]

1,443 1,200 950 122 [50] 81.50 × 110.00 × 48.00 [207 × 279 × 122]

81.50 × 84.00 × 46.00 [207 × 213 × 117]

3,500 [1,588]

99.50 × 110.00 × 48.00 [252.7 × 279 × 122]

99.50 × 84.00 × 46.00 [252.7 × 213 × 117]

5,000 [2,268]

1,684 1,400 1,108 104 [40] 81.50 × 110.00 × 48.00 [207 × 279 × 122]

81.50 × 84.00 × 46.00 [207 × 213 × 117]

3,500 [1,588]

99.50 × 110.00 × 48.00 [252.7 × 279 × 122]

99.50 × 84.00 × 46.00 [252.7 × 213 × 117]

5,000 [2,268]

1,804 1,500 1,188 104 [40] 81.50 × 110.00 × 48.00 [207 × 279 × 122]

81.50 × 84.00 × 46.00 [207 × 213 × 117]

3,500 [1,588]

99.50 × 110.00 × 48.00 [252.7 × 279 × 122]

99.50 × 84.00 × 46.00 [252.7 × 213 × 117]

5,000 [2,268]

†Not available.

SpeedStar 2000 Plus & SpeedStar SWD

Page 353: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | Surface Electrical Equipment 352

VariStarVariable speed drive

VariStar* Variable Speed Drive (VSD) Pulse Width Modulation (PWM) Output

Output rating, kVA at 480/380 V 200/158 390/309 518/410

Output rating, A 241 469 623

Ambient temperature, degF [degC] 14 to 122 [–10 to 50] 14 to 122 [–10 to 50] 14 to 104 [–10 to 40]

Dimensions, H × W × D, in [cm] 81.5 × 35.5 × 35 [207 × 90.2 × 89] 81.5 × 45.5 × 42 [207 × 115.6 × 106.7] 81.5 × 45.5 × 42 [207 × 115.6 × 106.7]

Approximate weight, lbm [kg] 1,000 [454] 1,200 [544] 1,200 [544]

VariStar VSD Sine Wave Output

Output rating, kVA at 480/380 V 390/309 518/410

Output rating, A 241 469 623

Ambient temperature, degF [degC] 14 to 122 [–10 to 50] 14 to 122 [–10 to 50] 14 to 104 [–10 to 40]

Dimensions, H × W × D, in [cm] 96 × 35.5 × 35 [243.8 × 90.2 × 89] 96 × 45.5 × 42 [243.8 × 115.6 × 107] 96 × 45.5 × 42 [243.8 × 115.6 × 106.7]

Approximate weight, lbm [kg] 1,500 [680] 2,000 [907] 2,000 [907]

VariStar VSD Principal Control Parameters

Control system PWM flux-vector, V/Hz control

Input power 380/480 V (± 10%), 50/60 Hz (± 5%)

Output voltage regulation Same as input power

Frequency setting 0.01–120 Hz, 0.01-Hz resolution

PWM carrier frequency User-adjustable: 0.5–3.0 kHz, sine wave fixed at 2.2 kHz

Input configuration 6-pulse diode only

Efficiency 98% at all loads and speeds

Power factor 96% at all loads and speeds

Overload rating 120% overcurrent for 60 s (100% continuous)

VariStar VSD Enclosure and Environmental Ratings

Type NEMA 3R-rated enclosure (outdoor); standard compliance with UL-508

Cooling method Forced air (internal and external fans)

Maximum altitude, ft [m] 3,300 [1,000] above sea level (derated above maximum altitude)

Relative humidity 20%–95% maximum (noncondensing)

H2S protection Coated circuit boards, heat sink

Material 12-gauge carbon steel enclosure

VariStarVariable speed drive

Page 354: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | Surface Electrical Equipment 353

SpeedStar MVDMedium-voltage variable speed drive—NEMA 1 for indoor applications

Power System SpecificationsControl system Sinusoidal multilevel PWM controlControl precision ± 0.5% of maximum output frequencyBase control system V/Hz, sensorless vector control, variable torque, closed-loop vector control, constant torqueEfficiency 96.5% (total system), 98% (inverter) Input power factor 0.96Overload capacity 115% for 60 s, 100% continuous (in some models, overload capacity is 110% for 60 s)Input voltage supply 2,400 to 13,800 V,† 50/60 Hz Input tolerance Voltage: ±10%; Frequency: ±5% Output Voltage: 0 to 4.5 kV; Frequency: 0 to 120 Hz Main input power Three-phase input isolation transformer, 24-pulse design with visible input fused disconnect and precharge circuitryControl power supply Integral to main transformer: three-phase 480-V, 50/60-Hz, 20-kVA capacity via tertiary winding; 15 kVA available for other uses Internal protective functions Current limit, overcurrent, overcharge, overload, undervoltage, overvoltage, ground fault, CPU error, abnormal coolingPWM carrier frequency 2.048 kHzOutput transistor type IGBTApplicable standards Electrical performance: NEC, ANSIComponents and others NEC, NEMA, UL, cUL, and CE† Requires addition of high-voltage circuit breaker at front end if higher than 6.6 kV

Construction Specifications Panel construction Free-standing, front-maintenance type with channel baseCooling Forced air cooled with optional redundant fanAir filter Front-mounted, aluminum, washable, screenedPaint and color Gavlon 841, 2-mil minimum, UL1332 compliant, ANSI-61 gray

Enclosure and Environmental RatingsType NEMA 1–rated, IP20, IEC-529, gasketed, and filtered

Ambient temperature operating range, degF [degC] 14 to 104 [–10 to 40]; output rating derated above upper temperature

Ambient temperature storage range, degF [degC] –7 to 140 [–14 to 60]Humidity 95% maximum (noncondensing)Max. altitude, ft [m] 3,300 [1,000] above mean sea levelVibration 0.5 g

n or less at 10 to 50 Hz

Installation Indoor, no direct sunlight, protected against corrosive and explosive gases

SpeedStar MVD* Variable Speed Drive (VSD) Models and Dimensions NEMA 1 (3.3- to 6.6-kV input and up to 4.5-kV output‡)

Output rating, A 62 74 87 99 112 124 155 186 217 248

Output power at 4,160 V and 60Hz, kVa [hp]

447[500]

536[600]

625[700]

715[800]

804[900]

893 [1,000]

1,116[1,250]

1,340[1,500]

1,536[1,750]

1,786[2,000]

Standard MVD footprint with sine wave filter

Dimensions (H × W × D), in [cm]

103.7 × 74 × 43.4 [263.4 × 188.0 × 110.3] 103.7 × 122 × 43.4 [263.4 × 309.9 × 110.3]

Weight, lbm [kg]

7,160 [3,248]

7,380 [3,348]

7,610 [3,452]

7,910 [3,588]

8,210 [3,274]

9,010 [4,087]

11,830 [5,366]

12,630 [5,729]

13,530 [6,137]

14,180 [6,432]

Micro Series MVD footprint without sine wave filter

Dimensions (H × W × D), in [cm]

103.7 × 48 × 48[263.4 × 121.9 × 121.9]

103.7 × 60 × 48 [263.4 × 152.4 × 121.9] 103.7 × 90 × 48 [263.4 × 228.6 × 121.9]

Weight, lbm [kg]

6,000 [2,722]

6,200 [2,813]

7,000 [3,175]

7,200 [3,266]

7,400 [3,357]

7,600 [3,448]

10,400 [4,718]

10,600 [4,808]

10,800 [4,899]

12,000 [5,444]

Micro Series MVD footprint with sine wave filter

Dimensions (H × W × D), in [cm]

103.7 × 48 × 48 [263.4 × 121.9 × 121.9]

103.7 × 60 × 48 [263.4 × 152.4 × 121.9] 103.7 × 112 × 48 [263.4 × 281.9 × 121.9]

Weight, lbm [kg]

6,440 [2,921]

6,640 [3,012]

7,580 [3,438]

7,840 [3,556]

8,040 [3,647]

8,240 [3,738]

11,780 [5,343]

12,580 [5,706]

13,480 [6,115]

14,130 [6,409]

‡In some models, the MVD must be derated beyond 4.16 kV

SpeedStar MVD IndoorMedium-voltage variable speed drive—NEMA 1 for indoor applications

Page 355: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | Surface Electrical Equipment 354

SpeedStar MVD* Variable Speed Drive (VSD) Models and Dimensions (with 3.3- to 6.6-kV input and up to 4.5-kV‡ output)

Output rating, A 62 124 186 248

Output power at 4.16 kV, kVa [hp] 447 [500] 893 [1,000] 1,340 [1,500] 1,786 [2,000]

Dimensions (H × W × D), in [cm] 107 × 168 × 63 [272 × 427 × 160]

107 × 168 × 63 [272 × 427 × 160]

107 × 168 × 63 [272 × 427 × 160]

107 × 222 × 72 [271.8 × 563.9 × 182.8]

Weight, lbm [kg] 15,000 [6,804] 15,000 [6,804] 15,000 [6,804] 24,500 [11,113]

SpeedStar MVD VSD Models and Dimensions (with 34.5-kV† input and up to 4.5-kV‡ output)

Output rating, A 62 124 186

Output rating at 4,160 V, kVa [hp] 500 [447] 1,000 [893] 1,500 [1,340]

Dimensions (H × W × D),§ in [cm] 96 × 252 × 63 [244 × 640 × 160]

96 × 240 × 63 [244 × 609 × 160]

96 × 240 × 63 [244 × 609 × 160]

Weight,§ lbm [kg] 34,000 [15,422] 34,000 [15,422] 34,000 [15,422]

Power System Specifications

Control system Sinusoidal multilevel PWM control

Control precision ±0.5% of maximum output frequency

Base control system V/Hz, sensorless vector control, variable torque, closed-loop vector control, constant torque

Efficiency 96.5% overall

Input power factor 0.96

Overload capacity 115% for 60 s, 100% continuous

Input voltage supply 3.3 kV to 13.8 kV, 50/60 Hz (dry-type transformer) or 0.38 kV to 34.5 kV, 50/60 Hz user specified (liquid-filled transformer)

Input tolerance Voltage: ±10%; Frequency: ±5%

Output Voltage: 0 to 4,160/4,500 V; Frequency: 0 to 120 Hz

Main input power Three-phase input isolation transformer, 36-pulse design with visible input fused isolation switch (optional for liquid-filled transformer >6.6 kV) and precharge circuitry

Control power supply 2-kVA control power transformer providing 110 V

Internal protective functions Current limit, overcurrent, overcharge, overload, undervoltage, overvoltage, ground fault, CPU error, internal RTDs for temperature monitoring

PWM carrier frequency 2.048 kHz

Output transistor type Medium-voltage IGBT

Applicable standards Electrical performance: NEC, ANSI

Components and others NEC, NEMA, UL,†† cUL††

Construction Specifications

Panel construction Free-standing, front-maintenance type, back or bottom access for motor and input power cables

Two sections: input transformer section and inverter section

Cooling Dry-type transformer section, convection cooled; heat eliminated through passive vents at top of drive

Liquid-filled transformer section type, ONAN cooled

Inverter section: power modules mounted on heat sinks, forced air cooled and cooled using plate-type heat exchangers

Paint color Bright white

SpeedStar MVD OutdoorMedium-voltage variable speed drive for outdoor applications

Page 356: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | Surface Electrical Equipment 355

Environmental Ratings

Overall enclosure type NEMA 3R rated, gasketed††, or filtered outdoor MVD with liquid-filled transformer‡‡

Ambient temperature operating range, degF [degC]

–13 to 122 [–25 to 50]‡‡

Ambient temperature storage range, degF [degC]

–22 to 140 [–30 to 60]‡‡

Humidity 95% maximum (noncondensing)

Max. altitude, ft [m] 3,300 [1,000] above sea level or less

Vibration 0.5 g or less at 10–50 Hz

Installation Outdoor, nonhazardous, noncorrosive environment† For other input voltages, dimensions and weights will be advised per project. ‡ In some models, the MVD must be derated beyond 4.16 kV. §All dimensions and weights are approximate.†† Available with up to 6.6-kV input with dry-type transformers.‡‡ For MVDs with liquid-filled transformers, temperature is variable, as specified on order.

SpeedStar MVD Outdoor

Page 357: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | Surface Electrical Equipment 356

FixStarFixed speed drive

3900-V FixStar drive low-voltage compartment.

FixStar* Fixed Speed Drive Specifications

Model 5000 3900 3300 1500

Voltage rating, V 5,000 3,900 3,300 1,500

Current rating, A 70; 130; 170; 200 70; 130; 170; 200 70; 130; 170; 200 70; 130; 170; 200

Frequency, Hz 50/60 50/60 50/60 50/60

Dimensions H × W × D, in [mm] 81 × 39 × 30.75 [2,060 × 995 × 785]

81 × 39 × 30.75 [2,060 × 995 × 785]

81 × 39 × 30.75 [2,060 × 995 × 785]

81 × 39 × 30.75 [2,060 × 995 × 785]

Weight, lbm [kg] 1,100 [500] 1,100 [500] 1,100 [500] 1,100 [500]

Operating temperature, degF [degC] –40 to 122 [–40 to 50 ] –40 to 122 [–40 to 50 ] –40 to 122 [–40 to 50 ] –40 to 122 [–40 to 50 ]

Storage temperature, degF [degC] –58 to 158 [–50 to 70] –58 to 158 [–50 to 70] –58 to 158 [–50 to 70] –58 to 158 [–50 to 70]

Certification CE† CE CE CE

Power rating, kVA 606; 1,126; 1,472; 1,732 473; 878; 1,148; 1,351 400; 743; 972; 1,143 182; 338; 442; 520†CE-89/336/EC (EMC Directive).

3900-V FixStar drive high-voltage compartment.

FixStar Drive Main Components

Main disconnect switch†

Power fuses‡

Vacuum contactor†,‡

Multitap control power transformer 1 kVA

Lightning arrestors

UniConn fixed speed controller†

Three current transformers (CTs) with CT burden module set

A095 backspin shunt

CSA-type 3R enclosure

Instrument potential transformers† CSA certification. ‡ UL certification.

FixStar Drive Optional Components

Phoenix system interface kit (UniConn controller Phoenix system card, three-phase choke and wiring)

LiftWatcher service interface kit (SCB, UniConn controller SCADA card, Phoenix system interface card (PIC) and wiring)

Bristol chart recorder kit

Pilot light kit†Available as field-installed kits.

Page 358: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | Surface Electrical Equipment 357

InstructAll-in-one acquisition and control unit

Instruct* All-in-One Acquisition and Control Unit Specifications†

DimensionsUnit length, H × W × D, in [mm] 7.1 × 8.5 × 7.4 [180 × 216 × 187]

Unit weight, lbm [kg] 9.5 [4.3]

Faceplate length, H × W, in [mm] 7.64 × 10.59 [194 × 270]

Instruct unit option cards‡, mm 172 × 170 × 25

Standard option cards, mm 172 × 130 × 20

Power supplyAlternating current (AC) 100- to 240-V rms, 75 W, both 50 and 60 Hz

Direct current (DC) 24 V ± 2%, 75 W

Temperature ratingOperating range, degF [degC] –40 to 167 [–40 to 75]

Storage range, degF [degC] –76 to 185 [–60 to 85]

Expansion card rackNo. of slots Four

Cards available Modbus RS-232 or RS-485 communication card, PIC, EIC, and HTIC cards, Modbus TCP/IP card

Feature card rackNo. of slots Two

Input/OutputDigital output Three channels per card, 100- to 260-V AC rms, 10- to 28-V DC, 3 A maximum

Digital input Six channels per card, 24-V DC power internally supplied

Analog input Four insulated per card, double-wire channels; 0- to 10-V DC (0 to 20 mA)

Analog output Two individually configurable per card, 4- to 20-mA current loops

Maintenance portConnection USB and standard serial port connector, DB9F, Modbus RS-232

Baud rate 300/600/1,200/2,400/4,800/9,600/19,200/38,400/57,600 bps

Serial communication Data bit: 8; stop bit: 1; parity: none

Remote communication interfaceNo. of channels One to six

Protocol Modbus RTU and Modbus TC/IP (with optional TCP/IP card)

Baud rate 300/600/1,200/2,400/4,800/9,600/19,200/38,400/57,600 bps

Serial communication Data bit: 7/8; stop bit: 1/2; parity: none/even/odd

Interface RS-232, RS-485, Modbus TCP/IP (one per communication card)

Gauge interfaceTypes of tools supported Phoenix xt150 system downhole gauge, Phoenix CTS system (all types), HTIC card

Interface PIC, EIC, or HTIC card

Data logging/trendingLogged events Starts, stops, alarms, trips, set point changes, system resets

Number of logged channels Up to 32 in parallel

Data storage capacity 32,000,000 data points

Sampling rate Individual per channel (up to one sample/s)‡ † CSA certified and CE compliant ‡ Options include sampling only when motor is running and exceeding user-set deviation limits.

Page 359: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | Surface Electrical Equipment 358

Phoenix SoloConnData acquisition and control unit

Phoenix SoloConn* Data Acquisition and Control Unit Specifications

Dimensions (H × W × L), in [mm] 2.6 × 4.1 × 10.75 [66 × 104 × 273] NEMA 1

Weight, lbm [kg] 3.3 [1.5] NEMA 1

Power supply 24-V DC ±5% 8W 110-V to 240-V AC, 50/60 Hz (optional)

Temperature, degF [degC] Operating range: –40 to 140 [–40 to 60] (DC input); –40 to 122 [–40 to 50] (AC input) Storage range: –40 to 185 [–40 to 85]

Digital output 1 relay dry contact; 24-V DC 1 A, 125-V AC 0.3 A; 3-pin quick connect

Communication port 1 Modbus RS-485 port (4 or 2 wires); 2,400–57,600 bits per second; 6-pin quick connect

Configuration port 1 Modbus RS-232 DB9F port, 2,400–57,600 bits per second

Qualifications†‡ §†† CE, (c)UL, CSA, ROHS, and WEEE

Enclosure rating NEMA 1

Downhole Gauge InterfaceNo. of gauges Max. of 1

Gauges supported Phoenix CTS system gauges, Phoenix xt150 system gauges, MultiSensor well monitoring unit, Select downhole monitoring gauge, and UltraLite* ESP monitoring systems

Max. output voltage/current 120 V, 34 mA

SoftwareSoftware StarView wellsite display software

Functionality Device configuration, including gauge coefficient upload Live data viewing, capture, and trending Internal trend memory data download to PC

† Conformité Européenne. ‡ Canadian Underwriters Laboratory. § Canadian Standards Association. †† Restriction of certain hazardous substances.

Page 360: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | Surface Electrical Equipment 359

Phoenix ArConnRack-mountable data acquisition and control unit

Phoenix ArConn* Rack-Mountable Data Acquisition and Control Unit Specifications

Dimensions (H × W × L), in [mm] 7 × 17.5 × 15.5 [178 × 445 × 394] (19-in [48.26-cm] rack mount)

Approximate shipping weight, lbm [kg] 30.0 [13.6]

Power supply 110-V to 240-V AC, 50/60 Hz (standard device only); 16-W; full load: 16 PIC cards, 145-W (max. consumption); 24-V DC ± 5%, 150 W

Temperature, degF [degC] Operating range: –40 to 131 [–40 to 50] Storage range: –40 to 167 [–40 to 75]

Configuration port 1 Modbus RS-232 DB9F port, 57,600 bits per second, on CPU card

Qualifications†‡§†† CE, (c)UL, CSA, and ROHS

Enclosure rating NEMA 1, IP10

Downhole Gauge InterfaceNo. of PIC V2 card slots 16

No. of gauges 1 per PIC V2 card (16 gauges)

Gauges supported Phoenix CTS system gauges, Phoenix xt150 system, and Select downhole monitoring gauges

Max. output current/power 30 mA, 3.6 W

Max. output voltage 120-V

Cable voltage status Short-circuit and open-line detection

Connection Through CPU card configuration port, using straight DB-9 serial cable

SoftwarePC software StarView wellsite display software

Functionality Device configuration, including gauge coefficient upload, live data viewing, capture, and trending; internal trend memory data download to PC

Remote Communication

No. of channels 1 by default, up to 4

Protocol Modbus RS-232/485

Baud rate, bits per second 300; 600; 1,200; 2,400; 4,800; 9,600; 19,200; 38,400; 57,600

Port setting 8 data bits; 1 or 2 stop bits; none, even, or odd parity

Internal Data Storage

Event log Up to 1,500 events, first-in, first-out basis

Type of events logged Status change and configuration changes

Trend data Up to 64MB (4,874,240 data points) of available memory for trending; user-settable option to write over first data in, or stop recording when memory is full

Trend data Temperature, pressure, vibration, and tool status

Sampling rate Up to 1 sample per second per PIC V2 card† Conformité Européenne. ‡ Canadian Underwriters Laboratory. § Canadian Standards Association. †† Restriction of certain hazardous substances. Qualifications are only valid with PIC V2 SLB PN 101095702.

Page 361: REDA Electric Submersible Pump Systems

REDA Electric Submersible Pump Systems Technology Catalog | Surface Electrical Equipment 360

SCB3Site communication box for use with real-time data transmission

SCB3 Site Communication Box Specifications

Wall Mount Enclosure

Height, in [cm] 15.75 [40]

Width, in [cm] 11.8 [30]

Depth, in [cm] 6.3 [16]

Satellite Antenna

Height, in [cm] 14.9 [38]

Width, in [cm] 14.9 [38]

Depth, in [cm] 1.1 [2.79]

Enclosure Construction

Material Blend of polybutylene terephthalate (PBT) and polycarbonate (PC)

Finish Natural (off-white)

Ingress protection NEMA 3R

Maximum altitude 2,000 m above sea level

Temperature

Operating, degF [degC] –40 to 167 [–40 to 75]

Storage, degF [degC] –40 to 167 [–40 to 75]

Power

Input 100 to 240 V AC, 50 to 60 Hz

Output 14.7 V DC, 2.6 A

Ultracapacitor Capacity 58 farad

Voltage 16.2 V, DC

Standards CSA C/US safety certification, CE compliant, RoHS compliant