recyclin flexible, fast and professional! il extract of ... · extract of the stocklist: other...
TRANSCRIPT
Recycling Oil Water Gas Plastic melt
Plastics Paper Hydraulics Chemistry Energy
Extract of the stocklist:
Other designs on request.
Aperture in mm
Wire diameterin mm
Mesh per inch1 inch
= 25,4mm
Open Areain % Weight
w d mesh FO kg/m2
10,0010,008,006,305,004,003,003,152,502,002,001,641,601,601,251,251,001,001,00
2,001,501,601,001,001,001,200,801,001,000,500,900,501,000,400,800,300,400,50
2,02,22,53,5
4,255,06,06,5
7,258,5
10,010,012,010,016,012,020,018,017,0
68756974686250645141644258385737575144
4,232,803,391,742,122,544,402,053,654,101,254,001,514,881,233,920,991,452,12
SQUARE MESHES, plain weave or *twill weave
PLAIN DUTCH WEAVE or *twilled weaveMicronic rating
nominalMesh per inch
1 inch = 25,4mm Weight
my mesh kg/m2
30026015010080502532201525105
12 x 6414 x 88
24 x 11030 x 15040 x 20050 x 250
80 x 700*120 x 400*165 x 800*
165 x 1400*200 x 600*
200 x 1400*325 x 2300*
4,103,152,701,601,301,001,200,750,710,700,500,680,47
REVERSED PLAIN DUTCH (PZ)Micronic rating
nominalMesh per inch
1 inch = 25,4mm Weight
my mesh kg/m2
1725406080
150
625/130625/102290/72175/50132/3686/24
0,850,801,552,403,10
Aperture in mm
Wire diameterin mm
Mesh per inch1 inch
=25,4mm
Open Areain % Weight
w d mesh FO kg/m2
0,870,800,720,630,500,500,400,40
0,3150,250,200,160,14
0,1250,10
0,0750,0630,0420,0360,025
0,400,500,350,400,320,100,220,250,200,16
0,1250,10
0,1120,0800,0630,0530,04
0,036*0,028*0,025*
2020242530364040506080
100100120150200250325400500
4838443737514238373738383137383637293225
1,562,441,541,971,59
0,7260,991,220,990,790,610,490,630,400,310,260,200,220,160,16
W I R E - C L O T H S
REVERSED TWILLED DUTCH (KPZ)Micronic rating
nominalMesh per inch
1 inch = 25,4mm Weight
micron ca. mesh kg/m2
5580
150300500
325/39260/40152/24132/1772/15
2,71,94,73,95,5
Rolf Körner GmbHNeue Straße 14-16 · D-52382 NiederzierGewerbegebiet Huchem-StammelnTel +49 (0) 24 28-94 19-0 · Fax +49 (0) 24 28-59 80www.rolfkoerner.de · [email protected]
Flexible, fast and professional!
WIRE CLOTHS
Warehouse
Light table
Measuring
Cutting
Plasma cutting
Rolf Körner GmbH
We have a well-sorted warehouse at our disposal, enabling us to respond to requests at short notice in the quickest and best possible way.
This allows us to deal with your requests promptly and to your full satisfaction.
Materials: Stainless steel, plain steel, galvanised steel, copper, brass, phosphor bronze, special alloys
Weaves: Plain weave, twilled weave, plain Dutch weave, Dutch twilled weave, reversed plain Dutch weave, reversed twilled Dutch weave
Filtration grade: From 3 μm up to 10 mm
Measurements: Standard widths 1000 mm, 1220 mm and 1300 mm Up to 6000 mm upon request Roll lengths: 30,5 m, 100 m, 150 m or on request
Other designs on request.
Square meshes, plain weaveWire Cloth in which each warp and shute wire is woven alternately over one and under one, giving a square plain weave.
Square meshes, twill weaveWire Cloth in which each warp and shute wire is woven alternately over two and under two.Compared to plain weave the open area is smaller.
Plain dutch weaveWire filter cloth, woven in a plain weave pattern having few and thicker warp wires and many and thinner weft wires, beaten closely together.
Reverse plain dutch (PZ)This the reverse of nominal dutch. The largest number of wires is found in the warp and the lesser number in the weft. The weft wires are much thicker than the warp wires. This construction is characterised by high stability at good troughput and excellent regeneration.
Twilled dutch weaveTwill dutch is of a similar construction to plain dutch i.e. fewer thick warp wires, many thin weft wires, except the weave pattern is twill which allows the maximum number of weft wires.Dutch twill is a surface filtration media and allowing the smallest openings.
Flexible, fast and professional!
KÖRNER