www.lasertools.co.uk

5550

Rear Hub Puller - Ford Transit

InstructionsFor removing the rear hubs from front wheel drive when the wheel bearings have seized or tight to the stub axles• ApplicationFordtransit2000onwards

• Frontwheeldrivevehiclesonly

• OEM204-595-09

• MadeinSheffield

2 3

www.eldontools.co.uk www.lasertools.co.ukwww.lasertools.co.uk

Instructions

Contents

Rear Hub Puller - Ford Transit

Ref OEM Codes DescriptionA ImpactForceScrewB 204-595-09 AdaptorplateC SafetychainD SafetyclipE Nuts&washerstomountB(X5)

1. Slidethedriveflangeadaptorplateoverthewheelstudsandmountusingwashersandboltsprovided.Tightenevenlyto100Nm

2. AttachthesafetychainandsnaphooktothevehiclesuspensionasshowninFig.1

3. Greasethethreadofcomponent (A)withsuitablehighpressuregreasesuchasMolybdenumDisulphide(blackUJgrease).

4. Insertandtightenthecomponent(A)intothedriveflangeadaptorwiththeHexfacingoutandtightensothebaseofthecentrerodcontactsandpressesonthestubaxle.

5. Tightenthenhittheouterendof (A) twicewithasuitablecoppermalletthenretighten.Continuethisprocesstillthehubpullsoffthestubaxle.

Note: if the wheel bearing is very tight on the stub axle the removal process will damage the internal crush spacer in the bearing. For this reason the wheel bearing should be replaced after removal.

AB

C

D

E

Precautions

Component Descriptions

Component A – Impact Force Screw1. Thistoolisathreadedtubewithalarge

Hexatoneendandasolidmetalbarupthemiddle.

2. Bytighteningthethreadedbodydownintothecentreofthedriveflangeadaptor(B)thecentrebarof(A)willpushagainstthestubaxle.

3. Oncetightsimplyhittheouterendofthecentrebarwithacoppermallet.

4. Thishammerstrikewilldeliveradirectshocktothejointbeingseparated.

5. Hittwiceandre-tightentheImpactForceScrewthenrepeattillthejointhasseparated.

Component B – Rear Drive Flange Adaptor PlateThisisspecificallydesignedtobolttothevehiclesreardriveflangeaftertheremovalofthecentrehubnut.

Components – Safety Chain and Snap HookThesetoolsareusedtoconnectthedriveflangeandtoolassemblylooselytothevehicletopreventtheassemblyfromaccidentlyfallingandcoursinginjury.

Component E - Nuts and WashersUsedtoconnectthedriveflangeadaptortothewheelstudsofthedriveflange.

Slide Hammer (Laser 5269)

Note:featuresadoubleendedshafttoallowattachmenttoeitherM18x1.5or5/8"threads.

• 7.5kg(16.5Lbs)weight

• Doublehandles

Note: these instructions are for reference only. Please refer to the vehicle manufacturers instructions

• Alwayswearappropriatesafetyclothingincludinggloves,safetygogglesandsafetybootswhenworkingwiththiskit

• Ensurethevehicleissafelyjackedupandsupportedonsuitablestandstoprovideastableplatform.

• Removeappropriateroadwheels• Removestheappropriatebrakecalliperetc.• Removecentrehubnut

B

C/D

Fig. 1

ThiskithasbeendevelopedtoremovetherearhubsfromfrontwheeldriveTransitswhenthewheelbearingshaveseizedoraretighttothestubaxles.Theadaptorplateinthekithasacentrethreadof11/2"BSWthreadtoallowittobeusedwitheithertheImpactForceScrewprovidedorwithsuitableadaptors,anyformofhydraulicpullerorslidehammer.OEMtoolnumber:204-595-09