reality capture for oil and gas - strategyeng.com
TRANSCRIPT
1400 Broadfield Blvd., Suite 500 • Houston, Texas 77084Main: 832-617-9000 • Fax: 281-398-9904
[email protected] • www.strategyeng.com
Strategy Engineering & Consulting, LLC
Reality Capture for Oil and GasStrategy 3D laser scanning services use the latest technology to quickly provide reliable data which has many applications in the oil and gas industry.
Step by Step Process:• Review facility equipment
arrangement in office to determine scan location and duration.
• Scan asset: Field trip to scan is typically 1 – 3 days, depending on size of scope.
• Perform laser scanning at multiple locations to ensure sufficient data capture.
• Daily review of data capture to ensure quality.
• Return to office and download data into system for processing and registration.
• Produce project point cloud to use within Autodesk modeling environments.
Laser Scan Benefits:Reduced Construction Time and Cost • Reduction and/or removal
of field welds.• Reduction of errors caused by
manual measurements.• Removes requirement for additional
field trip for dimensional verification.
Reduced Engineering Costs• Shorter field durations for
data gathering.• Back modeling of existing
components is removed or reduced.
• Additional data improves overall design and pipe routing.
Other Benefits:• Simultaneous or multiple projects
from 1 scan.• Capture all required information in
a single trip.• Obtain HD photos from each scan
location for ReCap™ real view.• Allows for complete model review
of the modifications.
Deliverables:• Point cloud will be delivered by
either FTP transfer or portable external hard drive.
• Customer can use point cloud in Autodesk compatible products (i.e. AutoCAD®, Navisworks, CADWorx®, ReCap™, etc.).
• ReCap™ file (point cloud and HD panoramic images) viewable free version of Autodesk ReCap™.
Photo Point Cloud
TYPES OF PROJECTS
Facility modifications
Time-lapse comparisons
Laser scanning for bid packages
As-built structures and facilities
Construction inspection of critical equipment
Dimensional analysis and planning
Tank analysis
1400 Broadfield Blvd., Suite 500 • Houston, Texas 77084Main: 832-617-9000 • Fax: 281-398-9904
[email protected] • www.strategyeng.com
Strategy Engineering & Consulting, LLC
Onshore Projects:
Project Experience
Offshore Projects:
Strategy has been on site at 100+ location to perform laser scanning since 2017. Project scopes consisted of scanning as-built conditions for facility modifications, as well as verifying fabrication of piping/equipment before delivery. Below are some typical laser scan projects.
Chesapeake EnergyVespar G WellpadStrategy conducted a laser scan of the wellpad facility. Once the (AutoCAD® Plant 3D) model was created, isomet-rics were generated for duplication of the facility. Time on site to conduct the scan was 2 days.
Summit MidstreamSeverus Compressor Station Skidded EquipmentSupplied all the skidded equipment for this 30 MMSCFD greenfield com-pressor station in New Mexico. All skids were laser scanned to confirm exact tie-in points on skid prior to shipping to the field for installation.
American MidstreamVK-817A As-built platform in order to route new turbine compressor piping, fuel gas piping, and gas makeup. The laser scan conducted of the platform pro-vided the designers with the precise location of existing equipment and piping, ensuring accurate information when designing. Time offshore on platform was 2 days.
Arena Offshore EI-182A, EI-217B, EI-341A, EI-215B, EI-251AAs-built five of the client’s platforms in order to provide them with drawings of the precise locations of existing equip-ment and piping onsite. The client then used these drawings to perform pipeline and topside modifications on the assets.