8/8/2019 Reading CAM Data

1/19

Reading CAM data using the Z4CU tool

Once data from the screen is captured, they are stored in request context objects,

which in turn are transferred to the business objects, which get updated into the

CAM.

The CAM consists ofRecovery Table and Hold Table.

Recovery Table: This table consists of data that navigate till theUnderwriter Screen.

Hold Table: Data once submitted to the UnderWriter for further inquiry,get updated into the Hold table.

In order to view the data entered in the screen at any point of navigation just afterdata entry, the Z4CU tool is being used.

However, note that the Z4CU tool can be used during process navigation only

that is, the transaction must be in process, from where the data are captured.

Given below are the steps to be followed to view the CAM data after enteringinformation in the Dwelling Information page.

STEP 1: In the dwelling information page, after entering all the necessary fields,

note down the House hold number (Marked in Red) and the Trans time(Marked in

Blue) from the bottom of the page.

8/8/2019 Reading CAM Data

2/19

STEP 2: Logon using your mainframe id in the corresponding region. (TSJ1)

in this case.

When you have successfully completed logging in, go to the Z4CU

screen by just typing Z4CU in the space provided.

Trans Time

2007-01-10-07.09.05.045256

HouseholdNumber

0232355750

8/8/2019 Reading CAM Data

3/19

8/8/2019 Reading CAM Data

4/19

STEP 3: This is the Z4CU screen. The various fields that have to be entered

are:

CD(CAMObject)(Optional)

HOUSEHOLD-NUM

TIMESTAMP

LOB (Line Of Business) F in this case.

CREATE FROM (That is, the table from which we are viewing the

data SDT0 { Shared Data Table} in this case)

Some of the various CAM objects are as follows:

Business Objects CAM objects

FPLCY-SOI-CVG PLA48

FPLCY-SOI-CVG-DTS PLA49

FPLCY PLA45

FPLCY-FS-ORDER PLA46

FPLCY-MAIL-ADDR PLA47

8/8/2019 Reading CAM Data

5/19

FPLCY-SOI-CVG-MSG PLA50

FPROP-LOCATION GEA25

FJET-SKI-TRLR SIA29

FPLCY-SOI-RI-ELIG PLA51

FPLCY-UW-RESP PLA52

FPLCY-ENDORS PLA54 FPLCY-FS-NAME PLA55

FPLCY-CLNT PLA56

FPLCY-ENDORS-P PLA57

FPLCY-ENDORS-DESC PLA58

FPLCY-SOI-CVG-TX PLA59

MPLCY PLA60

LPLCY PLA61

CPLCY PLA62

FPLCY-BT-ID PLA63

FAGENT-REMARK PLA64 FRENEWAL-EXCPTION PLA67

FPLCY-AGENT-CHNG PLA72

FPLCY-TRAN-RESULT PLA73

FPLCY-DIS-SUR-CTL PLA75

FPLCY-CATMIT PLA81

FPLCY-DEPENDENT PLA82

FPLCY-MANUAL-ADJ PLA83

FPROP-CLNT-INFO NDA90

FPROP-STRUCTURE SIA34

FPCN-TRIG-DOC-REF PMA96

8/8/2019 Reading CAM Data

6/19

STEP 4: Note that there is a small correction that has to be made in the Transtime in the screen. The last 4 digits have to be changed to 9696(As marked in

Lavender).

8/8/2019 Reading CAM Data

7/19

STEP 5: When you hit Enter after filling all the above mentionedinformation, you will be navigated to the screen containing the data in the

corresponding CAM object.

8/8/2019 Reading CAM Data

8/19

8/8/2019 Reading CAM Data

9/19

F3

Reading CAM data using P302 screen:

8/8/2019 Reading CAM Data

10/19

Once we submit or suspend the transaction, we can check the CAM

values from P302 screen.

8/8/2019 Reading CAM Data

11/19

8/8/2019 Reading CAM Data

12/19

8/8/2019 Reading CAM Data

13/19

8/8/2019 Reading CAM Data

14/19

8/8/2019 Reading CAM Data

15/19

8/8/2019 Reading CAM Data

16/19

8/8/2019 Reading CAM Data

17/19

8/8/2019 Reading CAM Data

18/19

8/8/2019 Reading CAM Data

19/19