Razorweld

Winter 2018WELDING DEALS

Imag

e co

urte

sy o

f Adv

ance

d E

ngin

eerin

g &

Des

ign

Ltd.

Te

Awam

utu

Excellent Welding Products Razorweld

• Wide 100 x 60mm Viewing Area• Adjustable Shade 9-13• Reaction Time 1/10,000 Sec• 4 Independent Sensors• Adjustable Sensitivity• Adjustable Delay to Clear• Grind Mode• Digital Controls

DIGITAL CONTROL - WIDE VIEWDIGITAL CONTROL - WIDE VIEW

Razorweld RWX5OOO

RWX-5000

$279.00Including GST$242.61 excluding GST

XA-5022(D) ADF Control Panel

TRUETRUE CCOOLLOOUURR LENSLENS

WARRANTY2Year

• Positive pressure system• Long lasting P3 filter• Auto shutdown mode• 3 airflow levels • Blocked filter / low airflow alarm• Low battery alarm• Side or rear mount of blower unit• AS/NZS 1716:2012 approved• Warranty 1 year - Blower Unit• Warranty 2 years - RWX5000 Lens

Ultimate Protection from Harmful Welding FumesFitted with RWX-5000 Digital Auto-Darkening Helmet - Large View

TRADIES WELDING GLOVESIDEAL FOR MIG AND ARC WELDINGLEFT HAND PAIRS AVAILABLE

XA-10-2015L LARGE PAIR

XA-10-2015XL X-LARGE PAIR

XA-10-2015L-LH LEFTIES LARGE

XA-10-2015XL-LH LEFTIES X-LARGE

Designed for Tradesmen, these quality general purpose welding gloves are made of heat and flame resistant se-lected shoulder split cowhide. The standard feature of these gloves include a full sock lining for added comfort and Kev-lar stitching with welted seams for added wear resistance. Ideal for MIG and ARC welding.

$15.95Including GST$13.87 excluding GST

• Flame Retardant Cotton Sateen Body• Select Cowhide Leather Sleeves• Light Weight with Great Manoeuvrability• Dielectric Insulated Domes• KEVLAR Thread Stitching• Roll Up Collar with Hook & Loop• Flame Retardant Cotton Lined Collar• Side Pocket• Sizes XL, XXL, XXXL

Code Size +GST Inclusive

AP-2530 XL XL $86.09 $99.00

AP-2530 XXL XXL $91.30 $105.00

AP-2530 XXXL XXXL $95.65 $110.00

STEEL BLUE WELDING JACKETSLIGHTWEIGHT & COMFORTABLE

XA-PAPR-SP

$1,179.00Including GST

$1,025.22 excluding GST

• MIG/MMA/TIG Compatible• Job Memory Recall• Battery & Solar Powered• 4 Independent Sensors• Sensitivity & Delay Control• Classification 1/2/1/1• Variable Shade 5~9 / 9~13• Grind Mode• Fast Switching Speed 0.08 m/s• Compliant to AS/NZS 1338.1

XA-5022 ADF Digital Control Panel

• 96mm x 42mm Viewing Field• Adjustable Shade 9-13• Reaction Time 1/10,000 Sec• Adjustable Sensitivity• Adjustable Delay to Clear• Compliant to AS/NZS 1338.1

AS3000FG AUTOMATIC HELMETWITH EXTERNAL GRIND MODE

• MIG/MMA/TIG Compatible• Battery & Solar Powered• Replaceable Batteries• Large Viewing Area - 100mm x 60mm• Four Independent Sensors• Grind Mode Function• Variable Shade 4/9~13• Adjustable Sensitivity & Delay Controls• Fast Switching Speed 0.08 m/s• Compliant to AS/NZS 1338.1

XA-5011 ADF Analog Control Panel

WARRANTY2Year

NEW ZEALANDS MOST POPULARNEW ZEALANDS MOST POPULARENTRY LEVEL AUTO HELMETENTRY LEVEL AUTO HELMET

XA-1001F(G) ADF Analog Control Panel

COMFORT HEADGEARSTEALTH BLACK SHELL

WARRANTY2Year

AS3000FG

$125.00Including GST$108.70 excluding GST

AS6000F AUTOMATIC HELMETLARGE VIEWING AREA

AS7000D DIGITAL AUTOMATIC HELMETHUGE VIEWING AREA 100MM X 83MM

COMFORT HEADGEARSTEALTH BLACK SHELL

WARRANTY2Year

AS6000F

$175.00Including GST$152.17 excluding GST

AS7000D

$329.00Including GST$286.09 excluding GST

TRUETRUE CCOOLLOOUURR LENSLENS

TRUETRUE CCOOLLOOUURR LENSLENS

TRUETRUE CCOOLLOOUURR LENSLENS

Razorweld RWX5OOOP.A.P.R SYSTEM

A special coating of the lens face greatly improves the lter transmittance, allowing welding objects to be seen much clearer.

“What’s TRUE COLOUR?”

TRUETRUECCOOLLOOUURRSeeing is believing...

MONTH24Machine WarrantyXA-TIG200PXP200 AMP AC DC TIG/MMA• HF Arc Start • 2/4T Trigger Function• AC Balance Control• Pulse Control 3-Way Adjustment• Down Slope - Post Gas• Electrode Hot Start• Compliant to AS/NZ 60974-1

Power Supply 230V - 1Ph Duty Cycle @ 40°C 30% @ 200A @ 25°C 60% @ 200ACurrent Range TIG 10 - 200ACurrent Range MMA 20- 170ARated Power 5.8 KVADimensions (LxWxH) 510x330x360Weight 30kg

C/w XA26FXx4m Flexi Tig Torch, Spares Kit,Arc Set x 4m, Argon Flowtube Regulator

MONTHMONT244Machine Warranhine War242444A

ARC180180 AMP DC MMA/TIG

C/w 4m Arc Set ( incl.twist type Electrode Holder) & Carry CaseTig Torch is Optional and Extra

• 180 Amp - 230V• Industrial Application• MMA (stick electrode) - Selectable On/Off VRD - Hot Start, Arc Force• DC-TIG - Lift Arc ignition• Generator Compatible - 8.2KVA• Compliant to AS/NZ 60974-1

Power Supply 230V - 1Ph Duty Cycle @ 40°C 20% @ 180A @ 25°C 40% @ 180ACurrent Range MMA 30 - 180ACurrent Range TIG 10 - 180ARated Power 8.2 KVADimensions (mm) 313x130x250Weight 4.7kg

MONTH36Machine Warranty

ARC200200 AMP DC MMA/TIG

C/w 4m Arc Set ( incl.twist type Electrode Holder) & Carry BagTig Torch is Optional and Extra

• 200 Amp - 230V• Power Factor Correction (PFC)• MMA (stick electrode) - Selectable On/Off VRD - Hot Start, Arc Force• DC-TIG - Lift Arc ignition• Generator Compatible - 9.0KVA• Compliant to AS/NZ 60974-1

Power Supply 230V - 1Ph Duty Cycle @ 40°C 25% @ 200A @ 25°C 40% @ 200ACurrent Range MMA 30 - 200ACurrent Range TIG 10 - 200ARated Power 9.0 KVADimensions (mm) 365x135x277 Weight 6.5kg

MONTH36Machine Warranty

ARC160160 AMP DC MMA/TIG

MONTH36Machine Warranty

C/w 4m Arc Set ( incl.twist type Electrode Holder) & Carry BagTig Torch is Optional and Extra

• Certi ed with 10 Amp Plug• Power Factor Correction (PFC)

• MMA (stick electrode)

- Selectable On/Off VRD

- Hot Start, Arc Force

• DC-TIG - Lift Arc ignition• Generator Compatible - 7.1KVA• Compliant to AS/NZ 60974-1

Power Supply 230V - 1Ph Duty Cycle @ 40°C 20% @ 160A @ 25°C 40% @ 160ACurrent Range MMA 30 - 160ACurrent Range TIG 10 - 160ARated Power 7.1 KVADimensions (mm) 365x135x277 Weight 6.5kg

XA-TIG200PXP-K

$1,895.00Including GST

$1,647.83 excluding GST

TIG200CRZ ACDC200 AMP AC DC TIG/MMADIGITAL FUNCTION• AC Square Wave• AC Balance & HZ Control• User Friendly Digital Interface • Full Digital Pulse Functionality• Full Weld Control Functionality• Remote Amperage Capable• MMA with VRD• Automatic Arc Ignition Control• Arc Force Current Control• Compliant to AS/NZ 60974-1

Power Supply 230V - 1Ph Duty Cycle @ 40°C 25% @ 200A @ 25°C 55% @ 200ACurrent Range TIG 05 - 200ACurrent Range MMA 10 - 160ARated Power 6.0 KVADimensions (mm) 426x162x326 Weight 10.0kg

MONTH36Machine Warranty

TIG200PRZ200 AMP DC PULSE TIG/MMA• DC TIG HF Arc Ignition• Complete Pulse Function• 2T/4T Trigger, Spot Time• Start & Final Current Control• Pre & Post Gas Flow Control• Up & Down Slope Control• MMA Arc Ignition Control• MMA Arc Force Control• Compliant to AS/NZ 60974-1

Power Supply 230V - 1Ph Duty Cycle @ 40°C 25% @ 200A @ 25°C 55% @ 200ACurrent Range TIG 05 - 200ACurrent Range MMA 10 - 160ARated Power 7.0 KVADimensions (mm) 365x135x277 Weight 6.5kg

C/w XA17FXx8m Flexi Tig Torch, Spares Kit,Arc Set x 4m, Argon Flowtube Regulator, Carry Bag

MAMONTH36

Machine Warranty

MONTHMONT366Machine Warranhine War

XA-TIG200CRZ ACDC-K

$2,459.00Including GST

$2,138.26 excluding GST

XA-TIG200PRZ-K

$1,495.00Including GST

$1,300.00 excluding GST

XA-ARC200RZ-K

$839.00Including GST$729.57 excluding GST

XA-ARC180RZ-K

$57500Including GST$500.00 excluding GST

XA-ARC160RZ-K

$685.00Including GST$595.65 excluding GST

“Can I run my Xcel-Arc welder from a Generator”Xcel-Arc Inverter Welders and Plasma Cutters are designed to run from any generator that

can provide a regulated output equal to, or higher than the stated Rated Power (kVA) of the

Welder or Plasma Cutter. It’s very important that the Generator being used can maintain its

output power level when put under heavy load.

PRICE DROP!

Quality Accessories - All Xcel-Arc and Razoweld TIG/MMA welders come with quality

accessories including a suitable Suregrip Tig Torch, heavy duty leads & certifi ed regulator.

Sample Image

C/w XA26FXx4m Flexi Tig Torch, Spares Kit,Arc Set x 4m, Argon Flowtube Regulator

Kiwi Designed Welding Machines Razorweld

Kiwi Designed Welding Machines Razorweld

“What’s the bene t of being Spool Gun ready?”Mig Welders fi tted with Spool Gun connection allow for quick switching from a standard

Mig Torch to a Spool Gun. Spool Guns provide a simple yet extremely effective solution

to welding with soft welding wires such as Aluminium and Bronze. Spool Guns also allow

the use of smaller diameter wires that are sometimes problematic to feed over longer

distances. See page 6 for great Xcel-Arc Spool Gun offers.

MONTH36Machine Warranty

MONTH36Machine Warranty

MIG175175 AMP DC MIG/MMA

C/w 3m XA25 Suregrip™ BZL Series Mig Torch,Arc Set x 4m, Twin Gauge Argon Regulator

• Multifunction MIG/MMA• MIG Gas/Gasless• Burn Back Control• Wire Inch• Spool Gun Ready• 5Kg Spool Capacity• MMA Hot Start Electrode• Compliant to AS/NZ 60974-1

Power Supply 230V- 1Ph Duty Cycle @ 40°C 25% @ 175A @ 25°C 50% @ 175ACurrent Range MIG 30 - 175ACurrent Range MMA 10 - 175ARated Power 6.7 KVADimensions (mm) 470x190x380Weight 17kg

MONTH36Machine Warranty

MIG250CRZ250 AMP DC MIG/TIG/MMA• MIG Gas/Gasless• Inductance & Burn Back Control• Spool Gun Ready• 15Kg Spool Capacity• DC TIG - Lift Arc• MMA Hot Start Electrode• Compliant to AS/NZ 60974-1

Power Supply 230V - 1Ph Duty Cycle @ 40°C 30% @ 250A @ 25°C 60% @ 250ACurrent Range MIG 30 - 250ACurrent Range MMA/TIG 15 - 250ARated Power 10.8 KVADimensions (mm) 628x267x453Weight 30kg

MIG200200 AMP DC MIG/MMA

C/w 3m XA25 Suregrip™ BZL Series Mig Torch,Arc Set x 4m, Twin Gauge Argon Regulator

• Multifunction MIG/MMA• MIG Gas/Gasless• Burn Back Control• Wire Inch• Spool Gun Ready• 5Kg Spool Capacity• MMA Hot Start Electrode• Compliant to AS/NZ 60974-1

Power Supply 230V - 1Ph Duty Cycle @ 40°C 20% @ 200A @ 25°C 45% @ 200ACurrent Range MIG 30 - 200ACurrent Range MMA 10 - 200ARated Power 9.4 KVADimensions (mm) 470x190x380Weight 18kg

MIG205-SS200 AMP DC MIG/TIG/MMA• Multifunction MIG/TIG/MMA• New IGBT 40KHz Technology• MIG Gas/Gasless, 5kg Spool Capacity• Smart Set or Manual Operation• Spool Gun Ready• DC TIG – Lift Arc, Euro Torch Connect• TIG Gas Solenoid, Post-Gas/Downslope• Electrode Hot Start• Compliant to AS/NZ 60974-1

Power Supply 230V - 1Ph Duty Cycle @ 40°C 25% @ 200A @ 25°C 50% @ 200ACurrent Range MIG 30 - 200ACurrent Range TIG 10 - 200ARated Power 9.4 KVADimensions (mm) 470x190x380 Weight 18kg

C/w 3m XA24 Suregrip™ BZL Series Mig Torch,Arc Set x 4m, Twin Gauge Argon RegulatorEuro Tig Torch is optional, see page 6

MONTH36Machine Warranty

Tig Torch is Optional and Extra

C/w 4m XA24 Suregrip™ BZL Series Mig Torch,Arc Set x 4m, Twin Gauge Argon Regulator

• Multifunction MIG/TIG/MMA• MIG Gas/Gasless• Inductance & Burn Back Control• 15Kg Spool Capacity• DC TIG - Lift Arc• MMA Hot Start• Compliant to AS/NZ 60974-1

MIG250WRZ250 AMP DC MIG/TIG/MMA

Power Supply 230V - 1PhDuty Cycle @ 40°C 35% @ 250A @ 25°C 60% @ 250ACurrent Range MIG 30 - 250ACurrent Range TIG-MMA 10 - 250AWeight 58KgDimensions (mm) 900x400x785

Tig Torch is Optional and Extra

C/w 4m XA24 Suregrip™ BZL Series Mig Torch,Arc Set x 4m, Twin Gauge Argon Regulator

MONTH36Machine Warranty

Quality Accessories - All Xcel-Arc and Razoweld MIG welders come with quality ac-

cessories including a suitable Suregrip MIG Torch, heavy duty leads & certifi ed regulator.

Sample Image

MIG25OD DIGITAL 250 AMP DC MIG/TIG/MMA• Remote Control Mig Torch• MIG Gas/Gasless 15Kg Spool• Soft Start - Burn Back - Wire Inch• Spool Gun Connection• DC TIG, Lift Arc ignition• TIG Down Slope & Post Gas• MMA function (Stick electrode) • VRD - Hot Start - Arc Force

Power Supply 230V - 1PhDuty Cycle @ 40°C 40% @ 250A @ 25°C 60% @ 250ACurrent Range MIG 30 - 250ACurrent Range MMA/TIG 10 - 250A Rated Power 10.8 KVAWeight 35KgDimensions (mm) 585x280x440

Euro Tig Torch is optional, see page 6

C/w 4m Suregrip™ Digital Control Mig Torch,Arc Set x 4m, Twin Gauge Argon Regulator

XA-MIG250CRZ-K

$1,969.00Including GST

$1,712.17 excluding GST

XA-MIG250DRZ-K

$2,249.00Including GST

$1,955.65 excluding GST

XA-MIG250WRZ-K

$2,195.00Including GST

$1,908.70 excluding GST

XA-MIG175RZ-K

$1,159.00Including GST

$1,007.83 excluding GST

XA-MIG20ORZ-K

$1,349.00Including GST

$1,173.04 excluding GST

XA-MIG205SS-K

$1,799.00Including GST

$1,564.35 excluding GST

WHAT A BEAST!

PRICE DROP!

WHAT A BEAST!

MONTH36Machine Warranty

XA-MIG200MTS200 AMP DC MIG/TIG/MMA• Multifunction MIG/TIG/MMA• MIG Gas/Gasless• Burn Back Control• Spool Gun Ready• 15Kg Spool Capacity• DC TIG - Lift Arc• MMA Hot Start• Compliant to AS/NZ 60974-1

Power Supply 230V - 1PhDuty Cycle @ 40°C 35% @ 200A @ 25°C 60% @ 200ACurrent Range MIG 30 - 200ACurrent Range TIG 10 - 200ACurrent Range MMA 10 - 200AWeight 57KgDimensions (mm) 900x400x670

Tig Torch is Optional and Extra

C/w 4m XA24 Suregrip™ Binzel Style Mig Torch,Arc Set x 4m, Twin Gauge Argon RegulatorBonus Arc Defender Helmet

MONTH24Machine Warranty

MONTH24Machine Warranty

BONUS

XA-MIG350MTS350 AMP DC MIG/TIG/MMA• Multifunction MIG/TIG/MMA• MIG Gas/Gasless• Variable Inductance• Burn Back Control• 15Kg Spool Capacity• DC TIG - Lift Arc• MMA Hot Start• Compliant to AS/NZ 60974-1

Tig Torch is Optional and Extra

C/w 4m XA36 Suregrip™ Binzel Style Mig Torch,Arc Set x 4m, Twin Gauge Argon RegulatorBonus Arc Defender Helmet - Limited Offer

XA-MIG350MTS-SP

$3,159.00Including GST

$2,746.96 excluding GST

Receive this High Defi nition View Arc Defender Helmet when you buy a XA-MIG200MTS or XA-MIG350MTS

welding machine during our Winter 2018 promotion - Strictly limited offer,while stocks last.AUTOMATIC HELMET

MONTH36Machine Warranty

MONTH36Machine Warranty

CUT4545 AMP PLASMA CUTTER

Power Supply 230V - 1PhDuty Cycle @ 40°C 30% @ 45A @ 25°C 60% @ 45ARated Input Power 5.5KVAAir Flow Draw 6.7cfmAir Pressure 75psiWeight 9.8KgDimensions (mm) 410x165x330

Power Supply 415V - 3PhDuty Cycle @ 40°C 40% @ 80A @ 25°C 80% @ 80ARated Output Volatge 112VAir Flow Draw 7.5cfmAir Pressure 80psiWeight 16KgDimensions (mm) 560x220x415

C/w 6m SC80 Suregrip™ Plasma Torch,Earth Lead and Spares Kit.

C/w 6m SC80 Suregrip™ Plasma Torch,Earth Lead and Spares Kit.

CUT8080 AMP PLASMA CUTTER

MONTH36Machine Warranty

MONTH36Machine Warranty

XA-MIG500SWF500AMP DC MIG/TIG/MMA• 4 Roll Separate Wire Feeder• 10m Interconnecting Cables• MIG Inductance Control• MIG Burn Back Control• MIG Crater Current Control• MMA Arc Force Control• ARC AIR Gouging Capable• Compliant to AS/NZ 60974-1

Power Supply 415V - 3PhDuty Cycle @ 40°C 40% @ 500A @ 25°C 70% @ 500ACurrent Range MIG 50 - 500ACurrent Range TIG 20- 500ACurrent Range MMA 20- 500ARated Power 12.7KVA

Tig Torch is Optional and Extra

C/w 4m XA38 Suregrip™ Mig Torch,Arc Set x 4m, Twin Gauge Argon Regulator

XA-MIG350SWF350AMP DC MIG/TIG/MMA• 4 Roll Separate Wire Feeder• 10m Interconnecting Cables• MIG Inductance Control• MIG Burn Back Control• MIG Crater Current Control• MMA Arc Force Control• Heavy Duty Trolley, Cylinder Rack• Compliant to AS/NZ 60974-1

Power Supply 415V - 3PhDuty Cycle @ 40°C 40% @ 350A @ 25°C 70% @ 350ACurrent Range MIG 50 - 350ACurrent Range TIG 20 - 350ACurrent Range MMA 20 - 350ARated Power 11.9KVA

Tig Torch is Optional and Extra

C/w 4m XA36 Suregrip™ Mig Torch,Arc Set x 4m, Twin Gauge Argon Regulator

Power Supply 415V - 3PhDuty Cycle @ 40°C 40% @ 350A @ 25°C 70% @ 350ACurrent Range MIG 30 - 350ACurrent Range TIG 10 - 350ACurrent Range MMA 10 - 350AWeight 60KgDimensions (mm) 900x400x670

• 45 Amp @ 35% Duty Cycle - 230V• 16mm Clean Cut on Steel• 20mm Sever Cut on Steel• PFC - Power Factor Correction• Pilot Arc Low Frequency Start• 4T Function for Automatic use • Compliant to AS/NZ 60974-1

• 80 Amp @ 35% Duty Cycle - 415V• 30mm Clean Cut on Steel• 35mm Sever Cut on Steel• CNC Connect Ready• Pilot Arc Low Frequency Start• 4T Function for Automatic use • Compliant to AS/NZ 60974-1

A Cut Above the Rest ! RazorCut

STRICTLY LIMITED OFFER

XA-MIG200MTS-SP

$1,999.00Including GST

$1,738.26 excluding GST

XA-MIG350SWF-K

$4,795.00Including GST

$4,169.57 excluding GST

XA-CUT45RZ-K

$1,695.00Including GST

$1,473.91 excluding GSTXA-CUT80RZ-K

$2,185.00Including GST

$1,900.00 excluding GST

XA-MIG500SWF-K

$5,395.00Including GST

$4,691.30 excluding GST

MA

THTanty

$1,999.0099

NTHNTranty

MA

ig Torch, $3,159$$ .0099

MONTHMONT366Machine Warrantyhine War

MMA

ator

TTER

AA

MONTHMONT366Machine Warrantyhine War

30V

$11 695 005

ARGON FLOWMETER REGULATORTWIN FLOW TUBE ASSEMBLY

Argon Flowmeter Regulator - 0-25 l/min flow rate.Ideal for TIG welding applications.

Tested & Compliant to AS-NZ 4267 Standard

XCEL- GAS

GENUINE 200 AMPS AIR cooled ac weldingcreates a new era in tig torch perfomance

ldingance

Code Description +GST INC

ARC-T3-4M ARC T3 Air-Cooled Tig Torch Package x 4m $312.17 $359.00

ARC-T3-8M ARC T3 Air-Cooled Tig Torch Package x 8m $416.52 $479.00

GAS LENS STARTER KITS

AT-MGL16-KIT ARC T3 Medium Gas Lens Body Starter Kit - 1.6mm $60.00 $69.00

AT-MGL24-KIT ARC T3 Medium Gas Lens Body Starter Kit - 2.4mm $60.00 $69.00

AT-MGL32-KIT ARC T3 Medium Gas Lens Body Starter Kit - 3.2mm $60.00 $69.00

Innovative design features & intuitive ergonomics, coupled with advanced material choices enable a quantum leap forward in Air-Cooled Torch capability.

NEW!NEW!T3

Gas Lens Starter Kit Contents

The most versatile frame ever! With Wheel Castors!Assembles in less than 5 minutes, no tools re-quired. Made of heavy-duty finished steel tub-ing for long lasting durability and swivel connec-tors that allow numerous design configurations. Frame width 1.8m x 1.8mAccepts XcelArc LAVASheild Screens

XA-55-6466 (RED)

XA-55-7466 (GREEN)

LAVAshield welding screens are made with specially formulated vinyl 16 mil. (0.4 mm) thick to meet OSHA standards and Australian NZ Safety requirements. Screens are transparent and resistant to UV rays, ame and abrasion. Kevlar sewn & grommets placed at 270mm intervals. Screens t within 1.8m x 1.8mXA-55-8166 Curtain Frame

TRANSLUCENTWELDING SCREENS

$89.00Including GST$77.39 excluding GST

WELDING SCREEN MODULAR FRAME 1.8m x 1.8m

Either colour same price.

High quality Chrome Leather Welding Blanket Kevlar stitched to increase resistance to heat, cuts & abrasion. Ideal for protection from sparks and spatter. Use as a drop sheet or curtain for equipment and personal protection. Heavy duty metal re-inforced holes for tying down.

1.8m Square

LEATHER WELDING BLANKETSHEAVY DUTY SPLIT CHROME LEATHER

2.0m Square

XG-ARLFM25TW

$159.00Including GST$138.26 excluding GST

XA-LWB1818

$139.00Including GST$120.87excluding GST

XA-55-8166

$115.00Including GST$100.00 excluding GST

XA-LWB020

$155.00Including GST$134.78 excluding GST

SUREGRIP SP36300 AMP

• Air Cooled 200 & 300 Amps• 60% Duty Cycle with Argon Gas• 6 Metre Cable Length• Euro Connection• 24v Motor • External Wire Tensioner• Duraflex Cable System• Speed Control at Torch (machine capability dependent)

SUREGRIP SP24 200 AMP

SUREGRIP SP24 200 / SP36 300 AMP

MIG SPOOL GUNSIDEAL FOR DISTANCE & SOFT WIRES WELDING

• Air Cooled 150 Amps• 50% Duty Cycle with Argon Gas• 6 Metre Cable Length• Euro Connection• 24v Motor • External Wire Tensioner• Duraflex Cable System

SUREGRIP SP15 150 AMP

SUREGRIP SP15 150 AMPA versitile spool gun ideal for Panel Beating applications using 0.6mm wire, silcon bronze 0.9mm wire. Capable to weld aluminium up to 4mm thick using 0.9mm Aluminium wire.

Industrial series spool gun ideal for distance welding using most wires. Ideal for Aluminium welding applications.

XASP24-24-P1-60ER

$799.00Including GST$694.78 excluding GST

XASP36-24-P1-60ER

$849.00Including GST$738.26 excluding GST

XASP15-24-P1-60ER

$485.00Including GST$421.74 excluding GST

NEW!

Maximise the use of your TIG capable welding machine without an electronic gas solenoid valve. Complete with Spares Kit.

XATK4 (4m 16-25 Connector) XATK3 (4m 35-50 Connector)

SUREGRIP TIG TORCHWITH MANUAL GAS VALVE

Either kit same price.

SUREGRIP EURO CONNECT TIG TORCHEURO CONNECTION

XA26 200 Amps Air Cooled TIG Torch KIt Contains XA26 x 4 Metre TIG Torch with Euro Connection, plus Spares Box with Standard Spare Parts.

$179.00Including GST$155.65 excluding GST

EuroConnection

XATK7

$225.00Including GST$195.65 excluding GST

Suited to machinesXA-MIG205SS & XA-MIG250DRZ

ARC T3 Tig Torches are suited to Tig Welding machines with a trigger circuit and separate control plug. T3 Torches are supplied as standard with a rigid torch neck and 7-pin control plug to suit XA & RazorWeld Tig Welders. ARC T3 torch consumables and replacement parts are sold separately.

Excellent Welding Products Razorweld

PREMIUM GASLESSFLUX CORE MIG WIRE

XA E71T-GS is designed for single pass fillet and lap weld-ing on galvanized or carbon steel as thin as 1.2mm, without burn-through.

XA E71T-11 most popular all postion general purpose gas-less wire for single pass and limited multiple pass welds, ideal for mild steel, galvanised steel up to 12mm material thickness.

HOT PRICESHOT PRICESCODE PRODUCT DESCRIPTION +GST Inc

XA-E71TGS0850 E71T-GS Gasless Wire 0.8mm x 5.0kg $86.09 $99.00

XA-E71TGS0950 E71T-GS Gasless Wire 0.9mm x 5.0kg $77.39 $89.00

XA-E71T110950 E71T-11 Gasless Wire 0.9mm x 5.0kg $77.39 $89.00

XA-E71T111250 E71T-11 Gasless Wire 1.2mm x 5.0kg $68.70 $79.00

XA-E71T111215 E71T-11 Gasless Wire 1.2mm x 15.0kg $260.00 $299.00

• No shielding gas required • Ideal for outdoor welding • Smooth arc, minimal spatter • Great for galvanised steel

• Suitable for windy conditions • Operates on DC- straight polarity• Low fume emmission • International approvals

Code Description +GST INC

ESB4825-25V Magmaweld 7018-H8 Electrode 2.5mm - 2.5Kg $23.48 $27.00

ESB4832-25V Magmaweld 7018-H8 Electrode 3.2mm - 2.5Kg $23.48 $27.00

ESB4840-25V Magmaweld 7018-H8 Electrode 4.0mm - 2.5Kg $23.48 $27.00

• Excellent weldability• Excellent re-strike with smooth arc• 2.5kg vacuum sealed foil packs• Full international approvals

Applications and Properties:Suitable for welding steel, low alloy & high tensile. ESB48 is a basic electrode exhibiting tough and crack-free welded joints. Suitable for welding on dynamically loaded structures, shipbuild-ing, tank and boiler production. Weld metal recovery is approximately 115%. Smooth and clean welds merging into base metal without undercuts. Good gap bridging properties and welds are of X-ray quality. ESB48 is suited for depositing buffer layers on higher carbon steels.

ESB48 LOW HYDROGEN 7018-H8 ELECTRODE

CODE PRODUCT DESCRIPTION +GST INC

XAGP25 Xcel-Arc 6013GP Electrode 2.5mm 2.5kg Pkt $22.61 $26.00

XAGP32-25 Xcel-Arc 6013GP Electrode 3.2mm 2.5kg Pkt $22.61 $26.00

XAGP32 Xcel-Arc 6013GP Electrode 3.2mm 5.0kg Pkt $39.13 $45.00

XAGP40 Xcel-Arc 6013GP Electrode 4.0mm 5.0kg Pkt $39.13 $45.00

GENERAL PURPOSE WELDING ELECTRODES

1 x Oxygen Regulator1 x Acetylene or LPG Regulator1 x Cutting Attachment3 x Cutting Nozzles1 x Blow Pipe Handle1 x Mixer3 x Welding / Brazing Tips1 x Heating Tip - Acetylene1 x 10m Twin Line Hose Set1 x Welding / Cutting Goggles1 x Oxygen Flash Back Arrestor1 x Fuel Gas Flash Back Arrestor1 x Combination Spanner 1 x Radius Bar and Pivot 1 x Roller Guide1 x Tip Cleaner Set

INDUSTRIAL GAS SETS

XCEL- GAS

Regulator Flash Back Arresstors IncludedCompliant to AS/NZ4267 Safety Standard

Kit Contents

For Cutting, Welding, Brazing and Heating applicationsSuitable for use with 3 Series Cutting Attachment & Mixer

HIGH QUALITY ALUMINIUM MIG WIREPRECISION WOUND

CODE PRODUCT DESCRIPTION +GST INC

XA531020 Xcel-Arc 5356 x 1.0mm Al Mig Wire x 2kg $44.35 $51.00

XA531220 Xcel-Arc 5356 x 1.2mm Al Mig Wire x 2kg $43.48 $50.00

XA531070 Xcel-Arc 5356 x 1.0mm Al Mig Wire x NEW! 7kg $137.39 $158.00

XA531270 Xcel-Arc 5356 x 1.2mm Al Mig Wire x NEW! 7kg $128.70 $148.00

XA-55-8166 - OXY Acetylene Set

$573.85Including GST$499.00 excluding GST

CUTTING ATTACHMENTSCUTTING ATTACHMENTSFor Cutting with Oxygen Acetylene & Oxygen LPGSuitable for use with Type 41 & Type 44 2-Seat Cutting TipsXCEL- GAS

$89.00Including GST$77.39 excluding GST

BLOWPIPE HANDLEBLOWPIPE HANDLE

XCEL- GAS

XG-3WH

$79.00Including GST$68.70 excluding GST

INDUSTRIAL GAS REGULATORSINDUSTRIAL GAS REGULATORS

XCEL- GAS

Providing accurate gas delivery for industrial cutting, welding, heat-ing, brazing, soldering, and gas shielding applications.

$99.00Including GST$86.09 excluding GST

XG-PH01-8A

$149.00Including GST$129.57 excluding GST

LPG/AIR HEATING TORCH SETLPG/AIR HEATING TORCH SET

XCEL- GAS

XG-OXYLG XG-ACELG XG-LPGRG

XG-3CA

XG-3CAS

Angled Cutt ing Head

Straight Cutt ing Head

Xcel-Gas regulators are independently tested and comply to AS4267 standard, including oxygen promoted ignition test.

With “Pilot Light” function, set the pilot flame, when ready depress the trigger to produce a high heat, high volume flame.

Using propane (LPG) fuel gas mixed with atmospheric air it produces a powerful and highly stable flame even in most adverse conditions.

Either Set Same Price

Either Attachment Same Price

XA-55-8166 - OXY LPG Set

Oxygen Acetylene & Oxygen LPG Gas Cutting, Welding, Brazing and Heating Gas Sets.

• Precision Layer Wound• Triple Shaved• Smooth Feeding• X-Ray quality• Vacuum Sealed• Low Fume Factor• ABS Approval

Excellent Welding Products Razorweld

Either Regulator Same Price

WELDING FUME EXTRACTORPROVIDES EASY & STRONG PROTECTION AGAINST HARMFUL EMISSIONS OF WELDING FUMES AND GRINDING DUST.

The KSJ-0.7S is a mobile fume extraction unit capable of filtering an area of up to 30m3. Suited for the extraction & purification of fumes & dust generated by welding and grinding. The suction arm is easily rotatable 360 degrees & can be put in place by easily pulling the handle on the hood to the desired work area.

Technical DataAir Volume 2000 ± 100m³/hAir Suction Arm 1000m³/hMotor Power 0.75kwWorking Voltage 240V/50Hz 1 PhaseFiltering Area 20m³Maximum Pressure 1900PaCompressed Air 0.5-0.6MPaFiltration Efficiency >99.9%Noise Level <74 ± 5 dB(A)Dimensions 510x610x999mmWeight 98 ± 5KgWarranty 1 Year

Special pricing vaild until 30th September, 2018

“ Want to know more?” Visit www.xcelarc.com or contact your nearest Xcel-Arc and Razorweld stockist today!!

Razorweld Razorcut

Ideal for confined spaces, heavy transport, automotive, food, beverage and dairy industries. Can be worn in conjunction with a hard hat, making them the ideal solution for construction and site welding work, tank work, pipe welding, mobile welding & weld inspection.

Reaction Time 0.03msSensors 3 x IndependentShade: 5-9/9-13Sensitivity Outside AdjustableDelay Control Outside AdjustablePower Supply Battery, Solar CellsOperating Temp -5°C to 55°CStandards AS/NZS 1338.1:2012Warranty 2 Years

Package includes, XA-AG Automatic Goggles, Protection Hood, Protective Face Sheild, Bump Cap

AUTOMATIC WELDING GOGGLES

NEW!

• MIG WELDING • TIG WELDING • ARC WELDING • GRINDING• GAS WELDING • GAS CUTTING • PLASMA CUTTING

TRUETRUE CCOOLLOOUURR LENSLENS

XA-AGK

$195.00Including GST$169.57 excluding GST

KSJ-0.7S

$4,195.00Including GST

$3,647.83 excluding GST

Powered by lithium battery.

High speed switching time from light to dark 0.3ms ensures

operator protection

Shade Setting adjustment5-9 / 9-13

& Grind Mode selector

Photoelectric sensor technology combined with optically enhanced auto-darkening

lter provides an optimised view and effective protection.

A light and well-balanced design with silicone skirt

Sensitivity and delay time selectors

Adjustable headband provides a comfortable

t for the operator.

WARRANTY2Year

Welding and hot cutting produce metal and fluxing fumes made up of toxic gases and very fine particles.Inhaling welding fumes can cause ill health.

Acute bronchitis Airway irritation Occupational asthma Metal fume fever Pneumonitis COPD - Chronic obstructive pulmonary disease Cancers Pneumoconiosis

WARNING! WORKSAFE NEW ZEALANDProlonged exposure to welding fumes is a serious hazard to workers respiratory health.

Download the WORKSAFE Fact Sheethttps://worksafe.govt.nz/dmsdocument/647- welding-and-local-exhaust-ventilation

Portable fume extraction unit with moveable and flexible arm. 230 Volt, single phase and suitable for industrial welding & grinding applications.

ONLY

The stores promoting the offers featured in this publication are independent businesses. Therefore, not all products in this catalogue are kept in stock at all times at all stores. Although best efforts have been made to ensure all details in this catalogue are correct at the time of printing, Esseti New Zealand Limited (the importer)

reserves the right to correct pricing and printing errors and product speci cations should the need arise. Offers valid until September 30th 2018, or while stocks last.

70+YEARS

SERVICING

N

ORTHLAN

D

+Y++EARS

SSERVICINGG

NN

ORTHLAN

DD

100% KIWI OWNED, OPERATEDAND PROUD OF IT!

261 PORT ROADWHANGAREIPH 09 438 7028

sales@donovans.co.nzwww.donovans.co.nz

OPENING HOURS: MON TO FRI: 7:00 - 5:00PM SAT’S: 8:00 - 12:00PM