RG_Eng_All_09-20-99

RAUGRID™ 2/3 - 30 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation

Physical Properties of Raugrid™ 2/3 - 30 Geogrid PROPERTY UNIT TEST METHOD VALUE¹

WEIGHT (Average) oz/sq yard ASTM D-5261 6.8

APERTURE SIZE (Average) MD TD Inch Measured w/calipers 1.0 1.2

PERCENT OPEN AREA (Average) % COE method 75+

WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD

TD 1418 1884

@ 5 % Strain

MD TD

lb/ft ASTM D-4595 417 513

ELONGATION AT BREAK MD TD % ASTM D-4595 9.0 12.0

Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 TD lb/ft

AASHTO 1996

979

Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)

Ft

Square yards Pounds

16.4 x 328 598 299

1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.

LTDS (TD) = TULTIMATE (TD) = 1884 = 979 lb/ft RFCR • RFID • RFD 1.52 x 1.1 x 1.15

LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664

E-Mail: luckenhaus@bellsouth.net

RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434

Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation

RG_Eng_All_09-20-99

RAUGRID™ 3/3 - 20 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation

Physical Properties of Raugrid™ 3/3 - 20 Geogrid PROPERTY UNIT TEST METHOD VALUE¹

WEIGHT (Average) oz/sq yards ASTM D-5261 7.4

APERTURE SIZE (Average) MD TD Inch Measured w/calipers 0.8 0.8

PERCENT OPEN AREA (Average) % COE method 75+

WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD

TD 2254 2219

@ 5 % Strain

MD TD

lb/ft ASTM D-4595 918 596

ELONGATION AT BREAK MD TD % ASTM D-4595 10.4 13.2

Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 MD lb/ft

AASHTO 1996

1172

Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)

Ft

Square yards Pounds

16.4 x 328 598 323

1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.

LTDS (MD) = TULTIMATE (MD) = 2254 = 1172 lb/ft RFCR • RFID • RFD 1.52 x 1.1 x 1.15

LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664

E-Mail: luckenhaus@bellsouth.net

RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434

Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation

RG_Eng_All_09-20-99

RAUGRID™ 4/2 - 15 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation

Physical Properties of Raugrid™ 4/2-15 Geogrid PROPERTY UNIT TEST METHOD VALUE¹

WEIGHT (Average) oz/sq yards ASTM D-5261 7.7

APERTURE SIZE (Average) MD TD Inch Measured w/calipers 0.6 0.6

PERCENT OPEN AREA (Average) % COE method 75+

WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD

TD 2918 1479

@ 5 % Strain

MD TD

lb/ft ASTM D-4595 781 376

ELONGATION AT BREAK MD TD % ASTM D-4595 10.6 11.9

Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 MD lb/ft

AASHTO 1996

1517

Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)

Ft

Square yards Pounds

16.4 x 328 598 334

1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.

LTDS (MD) = TULTIMATE (MD) = 2918 = 1517 lb/ft RFCR • RFID • RFD 1.52 x 1.1 x 1.15

LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664

E-Mail: luckenhaus@bellsouth.net

RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434

Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation

RG_Eng_All_09-20-99

RAUGRID™ 6/3 - 15 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation

Physical Properties of Raugrid™ 6/3-15 Geogrid PROPERTY UNIT TEST METHOD VALUE¹

WEIGHT (Average) oz/sq yards ASTM D-5261 10.4

APERTURE SIZE (Average) MD TD Inch Measured w/calipers 0.6 0.6

PERCENT OPEN AREA (Average) % COE method 68+

WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD

TD 3994 1959

@ 5 % Strain

MD TD

lb/ft ASTM D-4595 1144 452

ELONGATION AT BREAK MD TD % ASTM D-4595 13.1 12.1

Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 MD lb/ft

AASHTO 1996

2077

Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)

Ft

Square yards Pounds

16.4 x 164 298 238

1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.

LTDS (MD) = TULTIMATE (MD) = 3994 = 2077 lb/ft RFCR • RFID • RFD 1.52 x 1.1 x 1.15

LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664

E-Mail: luckenhaus@bellsouth.net

RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434

Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation

RG_Eng_All_09-20-99

RAUGRID™ 8/3 - 20 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation

Physical Properties of Raugrid™ 8/3 - 20 Geogrid PROPERTY UNIT TEST METHOD VALUE¹

WEIGHT (Average) Oz/sq yard ASTM D-5261 12.1

APERTURE SIZE (Average) MD TD Inch Measured w/calipers 0.8 0.8

PERCENT OPEN AREA (Average) % COE method 75+

WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD

TD 5378 2021

@ 5 % Strain

MD TD

lb/ft ASTM D-4595 1096 465

ELONGATION AT BREAK MD TD % ASTM D-4595 11.1 10.5

Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 MD lb/ft

AASHTO 1996

2796

Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)

Ft

Square yards Pounds

16.4 x 164 298 271

1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.

LTDS (MD) = TULTIMATE (MD) = 5378 = 2796 lb/ft RFCR • RFID • RFD 1.52 x 1.1 x 1.15

LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664

E-Mail: luckenhaus@bellsouth.net

RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434

Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation

RG_Eng_All_09-20-99

RAUGRID™ 10/3 - 20 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation

Physical Properties of Raugrid™ 10/3 - 20 Geogrid PROPERTY UNIT TEST METHOD VALUE¹

WEIGHT (Average) Oz/sq yard ASTM D-5261 15.6

APERTURE SIZE (Average) MD TD Inch Measured w/calipers 0.8 0.8

PERCENT OPEN AREA (Average) % COE method 60+

WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD

TD 6645 2014

@ 5 % Strain

MD TD

lb/ft ASTM D-4595 1637 411

ELONGATION AT BREAK MD TD % ASTM D-4595 12.8 9.8

Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 MD lb/ft

AASHTO 1996

3455

Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)

Ft

Square yards Pounds

16.4 x 164 298 337

1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.

LTDS (MD) = TULTIMATE (MD) = 6645 = 3455 lb/ft RFCR • RFID • RFD 1.52 x 1.1 x 1.15

LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664

E-Mail: luckenhaus@bellsouth.net

RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434

Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation

RG_Eng_All_09-20-99

RAUGRID™ 13/3 - 20 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation

Physical Properties of Raugrid™ 13/3 - 20 Geogrid PROPERTY UNIT TEST METHOD VALUE¹

WEIGHT (Average) oz/sq yard ASTM D-5261 17.4

APERTURE SIZE (Average) MD TD Inch Measured w/calipers 0.8 0.8

PERCENT OPEN AREA (Average) % COE method 60+

WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD

TD 8550 2089

@ 5 % Strain

MD TD

lb/ft ASTM D-4595 2548 568

ELONGATION AT BREAK MD TD % ASTM D-4595 13.9 13.0

Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 MD lb/ft

AASHTO 1996

4446

Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)

Ft

Square yards Pounds

16.4 x 164 298 370

1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.

LTDS (MD) = TULTIMATE (MD) = 8550 = 4446 lb/ft RFCR • RFID • RFD 1.52 x 1.1 x 1.15

LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664

E-Mail: luckenhaus@bellsouth.net

RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434

Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation

RG_Eng_All_09-20-99

RAUGRID™ 15/3- 20 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation

Physical Properties of Raugrid™ 15/3-20 Geogrid PROPERTY UNIT TEST METHOD VALUE¹

WEIGHT (Average) oz/sq yard ASTM D-5261 18.9

APERTURE SIZE (Average) MD TD Inch Measured w/calipers 0.8 0.8

PERCENT OPEN AREA (Average) % COE method 60+

WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD

TD 10139 2370

@ 5 % Strain

MD TD

lb/ft ASTM D-4595 2315 513

ELONGATION AT BREAK MD TD % ASTM D-4595 11.8 12.8

Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 MD lb/ft

AASHTO 1996

5273

Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)

Ft

Square yards Pounds

16.4 x 164 298 394

1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.

LTDS (MD) = TULTIMATE (MD) = 10139 = 5273 lb/ft RFCR • RFID • RFD 1.52 x 1.1 x 1.15

LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664

E-Mail: luckenhaus@bellsouth.net

RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434

Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation

RG_Met_All_9-8-99

RAUGRID™ 2/3 - 30 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation

Physical Properties of Raugrid™ 2/3 - 30 Geogrid PROPERTY UNIT TEST METHOD VALUE¹

WEIGHT (Average) g/m² ASTM D-5261 231

APERTURE SIZE (Average) MD TD mm Measured w/calipers 25 30

PERCENT OPEN AREA (Average) % COE method 75+

WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD

TD 20.7 27.5

@ 5 % Strain

MD TD

kN/m ASTM D-4595 6.1 7.5

ELONGATION AT BREAK MD TD % ASTM D-4595 9.0 12.0

Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 TD kN/m

AASHTO 1996

14.3

Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)

m

m² kg

5 x 100 500 136

1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.

LTDS (TD) = TULTIMATE (TD) = 27.5 = 14.3 kN/m RFCR • RFID • RFD 1.52 x 1.1 x 1.15

LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664

E-Mail: luckenhaus@bellsouth.net

RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434

Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation

RG_Met_All_9-8-99

RAUGRID™ 3/3 - 20 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation

Physical Properties of Raugrid™ 3/3 - 20 Geogrid PROPERTY UNIT TEST METHOD VALUE¹

WEIGHT (Average) g/m² ASTM D-5261 253

APERTURE SIZE (Average) MD TD mm Measured w/calipers 20 20

PERCENT OPEN AREA (Average) % COE method 75+

WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD

TD 32.9 32.4

@ 5 % Strain

MD TD

kN/m ASTM D-4595 13.4 8.7

ELONGATION AT BREAK MD TD % ASTM D-4595 10.4 13.2

Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 MD kN/m

AASHTO 1996

17.1

Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)

m

m² kg

5 x 100 500 147

1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.

LTDS (MD) = TULTIMATE (MD) = 32.9 = 17.1 kN/m RFCR • RFID • RFD 1.52 x 1.1 x 1.15

LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664

E-Mail: luckenhaus@bellsouth.net

RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434

Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation

RG_Met_All_9-8-99

RAUGRID™ 4/2 - 15 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation

Physical Properties of Raugrid™ 4/2-15 Geogrid PROPERTY UNIT TEST METHOD VALUE¹

WEIGHT (Average) g/m² ASTM D-5261 263

APERTURE SIZE (Average) MD TD mm Measured w/calipers 15 15

PERCENT OPEN AREA (Average) % COE method 75+

WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD

TD 42.6 21.6

@ 5 % Strain

MD TD

kN/m ASTM D-4595 11.4 5.5

ELONGATION AT BREAK MD TD % ASTM D-4595 10.6 11.9

Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 MD kN/m

AASHTO 1996

22.1

Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)

m

m² kg

5 x 100 500 152

1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.

LTDS (MD) = TULTIMATE (MD) = 42.6 = 22.1 kN/m RFCR • RFID • RFD 1.52 x 1.1 x 1.15

LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664

E-Mail: luckenhaus@bellsouth.net

RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434

Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation

RG_Met_All_9-8-99

RAUGRID™ 6/3 - 15 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation

Physical Properties of Raugrid™ 6/3-15 Geogrid PROPERTY UNIT TEST METHOD VALUE¹

WEIGHT (Average) g/m² ASTM D-5261 352

APERTURE SIZE (Average) MD TD mm Measured w/calipers 15 15

PERCENT OPEN AREA (Average) % COE method 68+

WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD

TD 58.3 28.6

@ 5 % Strain

MD TD

kN/m ASTM D-4595 16.7 6.6

ELONGATION AT BREAK MD TD % ASTM D-4595 13.1 12.1

Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 MD kN/m

AASHTO 1996

30.3

Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)

m

m² kg

5 x 50 250 108

1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.

LTDS (MD) = TULTIMATE (MD) = 58.3 = 30.3 kN/m RFCR • RFID • RFD 1.52 x 1.1 x 1.15

LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664

E-Mail: luckenhaus@bellsouth.net

RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434

Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation

RG_Met_All_9-8-99

RAUGRID™ 8/3 - 20 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation

Physical Properties of Raugrid™ 8/3 - 20 Geogrid PROPERTY UNIT TEST METHOD VALUE¹

WEIGHT (Average) g/m² ASTM D-5261 412

APERTURE SIZE (Average) MD TD mm Measured w/calipers 20 20

PERCENT OPEN AREA (Average) % COE method 75+

WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD

TD 78.5 29.5

@ 5 % Strain

MD TD

kN/m ASTM D-4595 16.0 6.8

ELONGATION AT BREAK MD TD % ASTM D-4595 11.1 10.5

Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 MD kN/m

AASHTO 1996

40.8

Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)

m

m² kg

5 x 50 250 123

1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.

LTDS (MD) = TULTIMATE (MD) = 78.5 = 40.8 kN/m RFCR • RFID • RFD 1.52 x 1.1 x 1.15

LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664

E-Mail: luckenhaus@bellsouth.net

RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434

Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation

RG_Met_All_9-8-99

RAUGRID™ 10/3 - 20 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation

Physical Properties of Raugrid™ 10/3 - 20 Geogrid PROPERTY UNIT TEST METHOD VALUE¹

WEIGHT (Average) g/m² ASTM D-5261 530

APERTURE SIZE (Average) MD TD mm Measured w/calipers 20 20

PERCENT OPEN AREA (Average) % COE method 60+

WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD

TD 97.0 29.4

@ 5 % Strain

MD TD

kN/m ASTM D-4595 23.9 6.0

ELONGATION AT BREAK MD TD % ASTM D-4595 12.8 9.8

Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 MD kN/m

AASHTO 1996

50.4

Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)

m

m² kg

5 x 50 250 153

1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.

LTDS (MD) = TULTIMATE (MD) = 97.0 = 50.4 kN/m RFCR • RFID • RFD 1.52 x 1.1 x 1.15

LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664

E-Mail: luckenhaus@bellsouth.net

RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434

Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation

RG_Met_All_9-8-99

RAUGRID™ 13/3 - 20 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation

Physical Properties of Raugrid™ 13/3 - 20 Geogrid PROPERTY UNIT TEST METHOD VALUE¹

WEIGHT (Average) g/m² ASTM D-5261 592

APERTURE SIZE (Average) MD TD mm Measured w/calipers 20 20

PERCENT OPEN AREA (Average) % COE method 60+

WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD

TD 124.8 30.5

@ 5 % Strain

MD TD

kN/m ASTM D-4595 37.2 8.3

ELONGATION AT BREAK MD TD % ASTM D-4595 13.9 13.0

Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 MD kN/m

AASHTO 1996

64.9

Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)

m

m² kg

5 x 50 250 168

1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.

LTDS (MD) = TULTIMATE (MD) = 124.8 = 64.9 kN/m RFCR • RFID • RFD 1.52 x 1.1 x 1.15

LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664

E-Mail: luckenhaus@bellsouth.net

RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434

Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation

RG_Met_All_9-8-99

RAUGRID™ 15/3- 20 GEOGRIDLückenhaus Raugrid™ geogrids, for soil and aggregate reinforcement, are manufactured of hightenacity, high molecular weight, polyester yarns, woven into a stable interlocking grid and then PVCcoated to provide damage protection during installation. Raugrid™ geogrids, developed for thereinforcement of steepened slopes and segmental retaining walls, and for road base stabilization, are:• biologically inert, resistant to most naturally encountered chemicals, alkalies, and acids• resistant to ultra violet exposure and installation damage• resistant to long-term creep• flexible for easy installation

Physical Properties of Raugrid™ 15/3-20 Geogrid PROPERTY UNIT TEST METHOD VALUE¹

WEIGHT (Average) g/m² ASTM D-5261 643

APERTURE SIZE (Average) MD TD mm Measured w/calipers 20 20

PERCENT OPEN AREA (Average) % COE method 60+

WIDE WIDTH TENSILE STRENGTH @ ULTIMATE MD

TD 148.0 34.6

@ 5 % Strain

MD TD

kN/m ASTM D-4595 33.8 7.5

ELONGATION AT BREAK MD TD % ASTM D-4595 11.8 12.8

Long Term Design Strength (LTDS) RFCR=1.52,RFID=1.1,RFD=1.15 MD kN/m

AASHTO 1996

77.0

Roll Dimensions (Width x Length) Roll Area Roll Weight (Average)

m

m² kg

5 x 50 250 179

1 All values stated here are Minimum Average Roll Values (unless otherwise stated) and are based on a 95% confidencelevel. (MD Machine Direction; TD-Transverse Direction , also called Cross Direction) RAUGRID™ is manufactured from polyester with a molecular weight (Mn ) > 25,000 grams/mole and Carboxyl EndGroups (CEG's) < 30 mmol/kg.

LTDS (MD) = TULTIMATE (MD) = 148.0 = 77.0 kN/m RFCR • RFID • RFD 1.52 x 1.1 x 1.15

LÜCKENHAUS NORTH AMERICA, INC. 841 East Main Street, Spartanburg, SC 29302 • Tel: 800/794-0910, 864/583-8663 • Fax: 864/583-8664

E-Mail: luckenhaus@bellsouth.net

RAUGRID™ Geogrids are distributed by CARTHAGE MILLS 4243 Hunt Road, Cincinnati, OH 45242 • Tel: 800-543-4430, 513/794-1600 • Fax: 513/794-3434

Partial reduction factors: RFCR= for creep deformation RFID = for installation damage RFD = for biological and chemical degradation

Raugrid Raugrid Specifications