ratio planning guide
TRANSCRIPT
5 Standalone with lower wire management tray, screen and
castors
6 Linear – 2 workstation cluster
7 Linear – 3 workstation cluster
8 Back to back – 2 workstation cluster
9 Back to back – 4 workstation cluster
10 Back to back – 6 workstation cluster
11-12 Ratio options
13 Ratio 120 – Standalone
18-19 Ratio 120 options
26 Glossary of Ratio 120 components
3
Introduction
Sit. Stand. Move. Repeat
The average worker spends between three and eight hours a day at their desk, with many of us spending more time sitting down than sleeping. Research shows links between sedentary lifestyles and an increased risk of diabetes, obesity, heart disease and some kinds of cancer. Standing for short periods increases blood flow, burns extra calories, and increases our metabolism. Extended standing can lead to increased risk of back pain and fatigue, so it’s best to switch positions during the day. Height adjustable furniture can reduce sitting times by up to 60%, and by alternating between sitting and standing our bodies are healthier. Ratio: Your desk, your way
Research shows that moving from one posture to another is beneficial to our health – people who move more, feel better. And people who feel better, work better. The Ratio height adjustable desk enables a smooth transition between sitting and standing. Users can vary their posture as they need, to find the right balance between sitting and standing throughout the day. Ratio can be specified as single or back-to-back desks in unlimited clusters, working with our other desking solutions to complete any floor plate.
Effortless Design
With its clean lines and lightweight design, Ratio has been designed to blend into the modern office
environment. Ratio encourages users to move and change their posture throughout the working day. It is
available with two kinds of electric height adjustment, including programmable pre-sets for use at assigned
desks; this means a user can adjust their desk to exactly the right height for them at the touch of a button.
Manual height adjustment is also available. There are a number of different screen options for Ratio,
depending on the configuration of the work space. When used in a standalone format, the screen is optional;
if included, the screen moves up and down simultaneously to afford the user additional privacy or can be
fixed to the wire management tray for a fixed screen. In a back-to-back formation, the screen remains in a
fixed position between the two desks. Ratio’s design ensures that ergonomic tools such as monitor arms are
fully supported. This enables the user to easily modify the position of one or more monitors when adjusting
their own posture.
How to use this Planning Guide
This document is intended to assist the user in proper planning of Ratio Furniture. This is not a Specification Guide. Refer to the Ratio Price Book for complete order and specification information.
4
Standalone Single workstation with glides
Product Number Description qty 1 RYTRGN.0816SM Rectangular worksurface / safety gap 1 2 RY3UW.08 Worksurface support (pair) 1 3 RYUBED.16 E-Beam 1 4 RY3ULESN3. Single sided legs / non-connecting / 700-1200mm (pair) 1 5 RY3UTSG.08. Single sided foot / glides (pair) 1 Function Control RY3UCX3. Standard control box / 700-1200mm 1 RY3UCCB. Control switch / basic 1 RY3UCP.U Control box power cable (UK) 1 RY3UHS. Hardware pack / single sided 1 See pg.11-12 for wire management options, alternative leg columns, screens, switches and power options
5
Standalone Single workstation with lower WM tray, screen and castors
Product Number Description qty 1 RYTRGN.0816SM Rectangular worksurface / safety gap 1 2 RY3UW.08 Worksurface support (pair) 1 3 RYUBED.16 E-Beam 1 4 RY3ULESC3. Single sided legs / connecting / 700-1200mm (pair) 1 5 RY3UTSC.08. Single sided foot / castors (pair) 1 6 RY3VFTS. Single sided frameless screen 1 7 RY3WTSLS. Lower WM tray / single sided 1 RY3WLSLR.16 Hinged lid / single sided / lower 1 Function Control RY3UCX3. Standard control box / 700-1200mm 1 RY3UCCB. Control switch / basic 1 RY3UCP.U Control box power cable (UK) 1 RY3UHS. Hardware pack / single sided 1 8 RY3UHSW. Hardware pack / single sided screen / WM 1 See pg.11-12 for wire management options, alternative leg columns, screens, switches and power options
6
Linear 2-person cluster
Product Number Description qty 1 RYTRGN.0816SM Rectangular worksurface / safety gap 2 2 RY3UW.08 Worksurface support (pair) 2 3 RYUBED.16 E-Beam 2 4 RY3ULESN3. Single sided legs / non-connecting / 700-1200mm (pair) 2 5 RY3UTSG.08. Single sided foot / glides (pair) 2 6 RY3UPS. Single sided spacing plate 1 Function Control RY3UCX3. Standard control box / 700-1200mm 2 RY3UCCB. Control switch / basic 2 RY3UCP.U Control box power cable (UK) 2 RY3UHS. Hardware pack / singe sided 2 See pg.11-12 for wire management options, alternative leg columns, screens, switches and power options
7
Linear 3-person cluster
Product Number Description qty 1 RYTRGN.0816SM Rectangular worksurface / safety gap 3 2 RY3UW.08 Worksurface support (pair) 3 3 RYUBED.16 E-Beam 3 4 RY3ULESN3. Single sided legs / non-connecting / 700-1200mm 3 5 RY3UTSG.08. Single sided foot / glides (pair) 3 6 RY3UPS. Single sided spacing plate 2 Function Control RY3UCX3. Standard control box / 700-1200mm 3 RY3UCCB. Control switch / basic 3 RY3UCP.U Control box power cable (UK) 3 RY3UHS. Hardware pack / single sided 3 See pg.11-12 for wire management options, alternative leg columns, screens, switches and power options
8
Back to back 2-person cluster
Product Number Description qty 1 RYTRGN.0816SM Rectangular worksurface / safety gap 2 2 RY3UW.08 Worksurface support (pair) 2 3 RYUBED.16 E-Beam 2 4 RY3ULEDC3. Back to back legs / connecting / 700-1200mm (pair) 2 5 RY3UXD.08 Cross-beam (pair) 1 Function Control RY3UCX3. Standard control box / 700-1200mm 2 RY3UCCB. Control switch / basic 2 RY3UCP.U Control box power cable (UK) 2 RY3UHD. Hardware pack / back to back 1 See pg.11-12 for wire management options, alternative leg columns, screens, switches and power options
9
Back to back 4-person cluster
Product Number Description qty 1 RYTRGN.0816SM Rectangular worksurface / safety gap 4 2 RY3UW.08 Worksurface support (pair) 4 3 RYUBED.16 E-Beam 4 4 RY3ULEDC3. Back to back legs / connecting / 700-1200mm (pair) 4 5 RY3UXD.08 Cross-beam (pair) 2 6 RY3UPD. Back to back spacing plate 1 Function Control RY3UCX3. Standard control box / 700-1200mm 4 RY3UCCB. Control switch / basic 4 RY3UCP.U Control box power cable (UK) 4 RY3UHD. Hardware pack / back to back 2 See pg.11-12 for wire management options, alternative leg columns, screens, switches and power options
10
Back to back 6-person cluster
Product Number Description qty 1 RYTRGN.0816SM Rectangular worksurface / safety gap 6 2 RY3UW.08 Worksurface support (pair) 6 3 RYUBED.16 E-Beam 6 4 RY3ULEDC3. Back to back legs / connecting / 700-1200mm (pair) 6 5 RY3UXD.08 Cross-beam (pair) 3 6 RY3UPD. Back to back spacing plate 2 Function Control RY3UCX3. Standard control box / 700-1200mm 6 RY3UCCB. Control switch / basic 6 RY3UCP.U Control box power cable (UK) 6 RY3UHD. Hardware pack / back to back 3 See pg.11-12 for wire management options, alternative leg columns, screens, switches and power options
11
* select width only, e.g. 1600mm wide desk = .16
** select height and width, e.g. height 1055, width 1600 = .105516
Screen heights: 1055, 1095, 1105, 1149, 1174, 1205 and 1250mm.
Screen widths: 1200, 1400, 1500, 1600, 1800 and 2000mm. Choose screen width to match worktop.
Leg Columns / Connecting Height Notes RY3ULFSC1. Single sided connecting / fixed 740mm Use with RY3UHSW. RY3ULFSN1. Single sided non-connecting / fixed 740mm RY3ULFDC1. Back to back connecting / fixed 740mm RY3ULESC3. Single sided connecting / electric 700-1200mm Use with RY3UHSW. RY3ULESC4. Single sided connecting / electric 650-1250mm Use with RY3UHSW. RY3ULESN3. Single sided non-connecting / electric 700-1200mm RY3ULESN4. Single sided non-connecting / electric 650-1250mm RY3ULEDC3. Back to back connecting / electric 700-1200mm RY3ULEDC4. Back to back connecting / electric 650-1250mm
Leg Column Feet Notes RY3UTSG.08 Single sided foot with glides Supplied as a pair RY3UTSC.08 Single sided foot with castors Supplied as a pair
Screens Notes RY3VFTS.**F Single sided frameless screen Requires screen bracket RY3SM. or RY3UHSW. RY3SM. Single sided screen bracket RY3VFTB.**F Back to back frameless screen Requires back to back screen bracket RY3SD. RY3SD. Back to back screen bracket GEFSSH. Frameless screen inline connector kit For use on back to back screen only RYMPSH.*SM Single sided modesty panel Melamine (M) or Veneer (W) available and requires
screen bracket RY3SM. RY3VNNS.**H Single sided frameless screen / basic Laminate (L), Melamine (M) or Veneer (W) RY3VNNB.**H Back to back frameless screen / basic Laminate (L), Melamine (M) or Veneer (W) RY3VFNB.** Back to back screen / framed / non-hanging RY3VFNS.** Single sided screen / framed / non-hanging GESE. Screen / finishing Kit To finish non-connecting framed screens GESH. Screen / inline connector kit For connecting linear framed screens
12
*select width, e.g. 1600mm wide desk = .16
Understructure Notes RY3UXD.08 Cross Beam / back to back RYUBF.* E-Beam / fixed To be specified with fixed legs RYUBED.* E-Beam / electric To be specified with electric sit-stand legs RY3UW.08 Worksurface support Supplied as a pair RY3UPS. Single sided spacing plate RY3UPD. Back to back spacing plate RY3UHS. Hardware pack / single sided RY3UHD. Hardware pack / back to back RY3UHSW. Hardware pack / single sided screen /
WM Use on single sided fixed lower WM tray, modesty screen or both
Function Control Notes RY3UCX3. Control box (700-1200mm) RY3UCX4. Control box (650-1250mm) RY3UCA. Anti-collision sensor RY3UCCB. Control switch / basic RY3UCCM. Control switch / memory RY3UCP.* Mains cable * UK (U), Schuko (D), France (F) and Switzerland (S)
Wire Management Notes MM-FLAP01. Access flap edge mounted Requires worksurface access cutout RYWB. Shallow basket RY3WTUN. Upper WM tray / non-perforated RY3WTUP. Upper WM tray / perforated RY3WTDL*. Lower WM tray / back to back * Select standard (S) or high capacity (H) RY3WLDLD. Drop in lid / back to back / lower RY3WLDL*. Hinged lid / back to back / lower * Umbilical positioned on left (L), right (R) or
alternate (A) sides of user RY3WTSLS. Lower WM tray / single sided / fixed Requires hardware pack RY3UHSW. RY3WLSL*. Hinged lid / single sided / lower * Umbilical on left (L) or right (R) of user RY3WU4. Umbilical floor to worksurface RY3WU1. Umbilical floor to WM tray RY3WU2. Umbilical WM tray to worksurface RY3WVDE. Vertical Riser / end condition Placed at the end of a back to back cluster RY3WVDEH. Vertical Riser / end / high capacity Cannot be used with lower WM tray RY3WVDM. Vertical Riser / mid condition Placed between back to back desk clusters
13
Superproduct Description qty RYCX1EXMNU.0612SM Single sided / electric sit-stand / no access / 700-1200mm 1
Product Number Description qty 1 RYTCGN.0612SM 120 degree worksurface / safety gap / no access 1 2 RYUWC.06 Worksurface support / 120 degree (pair) 1 3 RYUEEM.12 E-Beam / 120 degree / electric / mid (contains mid-worksurface support) 1 4 RYUEEH.12 E-Beam / 120 degree / electric / right 1 5 RYUEEL.12 E-Beam / 120 degree / electric / left 1 6 RY2ULEC3. 120 degree mid leg / electric / 700-1200mm 1 7 RY3ULESN3. Single sided legs / electric / 700-1200mm (pair) 1 8 RY2UTS.06 Single sided foot (pair) 1 Function Control RY2UCXC3. 120 degree standard control box / 700 - 1200mm 1 RYUCSM. Control switch / membrane 1 RH1321.30U Power entry cord / clover leaf (3.0m) 1 RY2UHC. Hardware pack / 120 degree 1 See pg.18-19 for worksurface, function control, wire management and screen options.
14
Ratio 120 2-person cluster
Product Number Description qty 1 RYTCGN.0612SM 120 degree worksurface / safety gap / no access 2 2 RYUWC.06 Worksurface support / 120 degree (pair) 2 3 RYUEEM.12 E-Beam / 120 degree / electric / mid (contains mid-worksurface support) 2 4 RYUEEH.12 E-Beam / 120 degree / electric / right 2 5 RYUEEL.12 E-Beam / 120 degree / electric / left 2 6 RY2ULEC3. 120 degree mid leg / electric / 700-1200mm 2 7 RY3ULESN3. Single sided legs / electric / 700-1200mm (pair) 1 8 RY3ULEDC3. Back-to-back legs / electric / 700-1200mm (pair) 1 9 RY2UTS.06 Single sided foot (pair) 1 10 RYUXCD.06 120 degree cross beam / clustered 1 Function Control RY2UCXC3. 120 degree standard control box / 700 - 1200mm 2 RYUCSM. Control switch / membrane 2 RH1321.30U Power entry cord / clover leaf (3.0m) 2 RY2UHC. Hardware pack / 120 degree 2 See pg.18-19 for worksurface, function control, wire management and screen options. NB: Screen options limited. For a back to back screen an under-module screen must be specified and attach to one of the worksurfaces only, using the single sided screen brackets RYSM. Back to back lower wire management unavailable for this option.
15
Superproduct Description qty RYCX3EXMNU.0612SM 120 Cluster / electric sit-stand / no access / 700-1200mm 1
Product Number Description qty 1 RYTCGN.0612SM 120 degree worksurface / safety gap / no access 3 2 RYUWC.06 Worksurface support / 120 degree (pair) 3 3 RYUEEM.12 E-Beam / 120 degree / electric / mid (contains mid-worksurface support) 3 4 RYUEEH.12 E-Beam / 120 degree / electric / right 3 5 RYUEEL.12 E-Beam / 120 degree / electric / left 3 6 RY2ULEC3. 120 degree mid leg / electric / 700-1200mm 3 7 RY3ULEDC3. Back-to-back legs / electric / 700-1200mm (pair) 3 8 RYUXCD.06 120 degree cross beam / clustered 3 9 RYWVC. 120 degree / vertical riser 1 Function Control RY2UCXC3. 120 degree standard control box / 700 - 1200mm 3 RYUCSM. Control switch / membrane 3 RH1321.30U Power entry cord / clover leaf (3.0m) 3 RY2UHC. Hardware pack / 120 degree 3 See pg.18-19 for worksurface, function control, wire management and screen options.
16
Ratio 120 4-person cluster
Product Number Description qty 1 RYTCGN.0612SM 120 degree worksurface / safety gap / no access 4 2 RYUWC.06 Worksurface support / 120 degree (pair) 4 3 RYUEEM.12 E-Beam / 120 degree / electric / mid (contains mid-worksurface support) 4 4 RYUEEH.12 E-Beam / 120 degree / electric / right 4 5 RYUEEL.12 E-Beam / 120 degree / electric / left 4 6 RY2ULEC3. 120 degree mid leg / electric 700-1200mm 4 7 RY3ULESN3. Single sided legs / electric / 700-1200mm (pair) 2 8 RY3ULEDC3. Back-to-back legs / electric / 700-1200mm (pair) 2 9 RY2UTS.06 Single sided foot (pair) 2 10 RYUXCD.06 120 degree cross beam / clustered 2 11 RY2UPD. Back-to-back spacing plate 1 Function Control RY2UCXC3. 120 degree standard control box / 700 - 1200mm 4 RYUCSM. Control switch / membrane 4 RH1321.30U Power entry cord / clover leaf (3.0m) 4 RY2UHC. Hardware pack / 120 degree 4 See pg.18-19 for worksurface, function control, wire management and screen options. NB: Screen options limited. For a back to back screen an under-module screen must be specified and attach to one of the worksurfaces only, using the single sided screen brackets RYSM. Back to back lower wire management unavailable for this option.
17
Superproduct Description qty RYCX6EXMNU.0612SM 120 Cluster / electric sit-stand / no access / 700-1200mm 1
Product Number Description qty 1 RYTCGN.0612SM 120 degree worksurface / safety gap / no access 6 2 RYUWC.06 Worksurface support / 120 degree (pair) 6 3 RYUEEM.12 E-Beam / 120 degree / electric / mid 6 4 RYUEEH.12 E-Beam / 120 degree / electric / right 6 5 RYUEEL.12 E-Beam / 120 degree / electric / left 6 6 RY2ULEC3. 120 degree mid leg / electric 700-1200mm 6 7 RY3ULEDC3. Back-to-back legs / electric 700-1200mm (pair) 6 8 RYUXCD.06 120 degree cross beam / clustered 6 9 RY2UPD. Back-to-back spacing plate 1 10 RYWVC. 120 degree / vertical riser 2 Function Control RY2UCXC3. 120 degree standard control box / 700 - 1200mm 6 RYUCSM. Control switch / membrane 6 RH1321.30U Power entry cord / clover leaf (3.0m) 6 RY2UHC. Hardware pack / 120 degree 6 See pg.18-19 for worksurface, function control, wire management and screen options.
18
Ratio 120 Options
Work Surfaces Notes RYTCGN.0612** 120 degree Worksurface / no access Only one size worktop available
**Square edge melamine (SM) or square edge veneer (SW)
RYTCGAL.0612** 120 degree Worksurface / left access RYTCGAR.0612** 120 degree Worksurface / right access
Wire Management Notes MM-FLAP01. Access flap edge mounted Requires worksurface access cutout RYWTS. Wire Management Tray Upper / Single Sided RYWTC.12 Wire Management Tray / Back to back RYWLC.12 Wire Management Tray Lid / Back to back RYWUS5. Umbilical / Single sided / floor to WM tray RYWUD1. Umbilical / B2B / floor to WM tray RYWUD2. Umbilical / B2B / WM tray to worksurface RYWUD3. Umbilical / B2B / WM tray to WM tray RYWUS4. Umbilical / Single sided / floor to worksurface RYWVC. 120 degree / vertical riser Required to mount WM or screens RYWB. Shallow basket RYWDE. Vertical riser / end condition
Frameless Screens Notes GEFSMNF. Frameless screen / single sided / fabric Requires single sided screen bracket GEFSVNF. Frameless screen / back to back / fabric Requires back to back screen bracket GEFSSH. Frameless screen inline connector kit For use on back to back screen only
Framed Screens Notes GESMNF. Screen / non-hanging / single sided / fabric GESMTF. Screen / top rail hanging / single sided / fabric GESMFF. Screen / face rail hanging / single sided / fabric GESVNF. Screen / non-hanging / back to back / fabric GESVTF. Screen / top rail hanging / back to back / fabric GESVFF. Screen / face rail hanging / back to back / fabric GESE. Screen / finishing Kit To finish non-connecting screens GESH. Screen / Inline connector kit For connecting linear screens RYMPSH. Modesty panel Requires RYSM.
19
Screen Brackets Notes RYSM. Modesty screen bracket / single sided RYSD. Desk up screen bracket / back to back
Function Control Notes RYUCSM. Control switch / membrane RYUCSB. Control switch / TOUCH Basic RYUCSD. Control switch / Digital membrane RH1321.30* Mains Cable * UK (U) and Schuko (D) available RY2UCXC3. Control box (700-1200mm) RY2UCXC4. Control box (650-1250mm)
20
Understructure Chalk White X1
Foot Polished Aluminium PA
Understructure Graphite G1
Worksurface Onyx Grey ONG
Understructure Folkstone Grey 8Q
Screen Kvadrat Hero 601
Pairing Ratio and Layout Studio
Ratio and Layout Studio are designed with a similar aesthetic and work seamlessly with one another when
paired with one another on a floorplate.
Both products can be used to create traditional work environments, agile work spaces, meeting areas,
collaborative team spaces, focussed work environments.
Configuration Living Office Application 1 Layout Studio with meeting end Hive, Jump Space, Workshop 2 Ratio, 2-person cluster Haven 3 Layout Studio 120, 6-person cluster Clubhouse, Haven, Hive 4 Ratio 120, 3-person cluster Haven, Hive 5 Ratio linear desking Clubhouse, Hive, Jump Space 6 Ratio 120, 6-person cluster Haven, Hive, Clubhouse 7 Layout Studio meeting table Workshop, Meeting Space, Cove 8 Layout Studio linear desking Clubhouse, Jump Space, Hive
24
E-Beam / Fixed RYUBF.
Worksurface Support RY3UW.08
Cross Beam RY3UXD.08
Single Sided Non-Connecting Legs / RY3UL*S**.
SS Framed Screen Non- Hanging / RY3VFNS.**
B2B Framed Screen Non- Hanging / RY3VFNB.**
Single Sided Screen Bracket RY3SM.
B2B Screen Bracket RY3SD.
B2B Spacing Plate RY2UPD.
Vertical Riser (mid) RY3WVDM.
25
Wire Management Tray RY3WTDLS. & RY3WTDLH.
Wire Management Lid Drop In RY3WLDLD.
B2B Hinged Lids RY3WLDL*.
WM Tray Non-Perforated RY3WTUN.
WM Tray Perforated RY3WTUP.
Single Sided Hinged Lids RY3WLS**.
Anti-Crush Sensor RY3UCA.
Umbilical Floor to Worksurface / RY3WU4.
26
Worktop RYTCG*.0612
E Beam RYUEF*.
Worksurface supports RYUWC.
Single Sided Non-Connecting Legs / RY3UL*S**.
Single sided screen brackets RYSM.
B2B screen brackets RYSD.
Umbilical SS floor to WM tray RYWUS5
Umbilical WM tray to worksurface / RYWUD2.
Umbilical floor to WM tray RYWUD1
120 vertical riser RYWVC.
Upper WM tray RYWTS.
B2B lower WM tray drop in lid RYWLCD.12
Introduction
Introduction
Introduction
Standalone
Standalone
Standalone
Standalone
Standalone
Standalone
Linear
Linear
Linear
Linear
Linear
Linear
Glossary of Ratio Components
Glossary of Ratio Components
Glossary of Ratio Components
6 Linear – 2 workstation cluster
7 Linear – 3 workstation cluster
8 Back to back – 2 workstation cluster
9 Back to back – 4 workstation cluster
10 Back to back – 6 workstation cluster
11-12 Ratio options
13 Ratio 120 – Standalone
18-19 Ratio 120 options
26 Glossary of Ratio 120 components
3
Introduction
Sit. Stand. Move. Repeat
The average worker spends between three and eight hours a day at their desk, with many of us spending more time sitting down than sleeping. Research shows links between sedentary lifestyles and an increased risk of diabetes, obesity, heart disease and some kinds of cancer. Standing for short periods increases blood flow, burns extra calories, and increases our metabolism. Extended standing can lead to increased risk of back pain and fatigue, so it’s best to switch positions during the day. Height adjustable furniture can reduce sitting times by up to 60%, and by alternating between sitting and standing our bodies are healthier. Ratio: Your desk, your way
Research shows that moving from one posture to another is beneficial to our health – people who move more, feel better. And people who feel better, work better. The Ratio height adjustable desk enables a smooth transition between sitting and standing. Users can vary their posture as they need, to find the right balance between sitting and standing throughout the day. Ratio can be specified as single or back-to-back desks in unlimited clusters, working with our other desking solutions to complete any floor plate.
Effortless Design
With its clean lines and lightweight design, Ratio has been designed to blend into the modern office
environment. Ratio encourages users to move and change their posture throughout the working day. It is
available with two kinds of electric height adjustment, including programmable pre-sets for use at assigned
desks; this means a user can adjust their desk to exactly the right height for them at the touch of a button.
Manual height adjustment is also available. There are a number of different screen options for Ratio,
depending on the configuration of the work space. When used in a standalone format, the screen is optional;
if included, the screen moves up and down simultaneously to afford the user additional privacy or can be
fixed to the wire management tray for a fixed screen. In a back-to-back formation, the screen remains in a
fixed position between the two desks. Ratio’s design ensures that ergonomic tools such as monitor arms are
fully supported. This enables the user to easily modify the position of one or more monitors when adjusting
their own posture.
How to use this Planning Guide
This document is intended to assist the user in proper planning of Ratio Furniture. This is not a Specification Guide. Refer to the Ratio Price Book for complete order and specification information.
4
Standalone Single workstation with glides
Product Number Description qty 1 RYTRGN.0816SM Rectangular worksurface / safety gap 1 2 RY3UW.08 Worksurface support (pair) 1 3 RYUBED.16 E-Beam 1 4 RY3ULESN3. Single sided legs / non-connecting / 700-1200mm (pair) 1 5 RY3UTSG.08. Single sided foot / glides (pair) 1 Function Control RY3UCX3. Standard control box / 700-1200mm 1 RY3UCCB. Control switch / basic 1 RY3UCP.U Control box power cable (UK) 1 RY3UHS. Hardware pack / single sided 1 See pg.11-12 for wire management options, alternative leg columns, screens, switches and power options
5
Standalone Single workstation with lower WM tray, screen and castors
Product Number Description qty 1 RYTRGN.0816SM Rectangular worksurface / safety gap 1 2 RY3UW.08 Worksurface support (pair) 1 3 RYUBED.16 E-Beam 1 4 RY3ULESC3. Single sided legs / connecting / 700-1200mm (pair) 1 5 RY3UTSC.08. Single sided foot / castors (pair) 1 6 RY3VFTS. Single sided frameless screen 1 7 RY3WTSLS. Lower WM tray / single sided 1 RY3WLSLR.16 Hinged lid / single sided / lower 1 Function Control RY3UCX3. Standard control box / 700-1200mm 1 RY3UCCB. Control switch / basic 1 RY3UCP.U Control box power cable (UK) 1 RY3UHS. Hardware pack / single sided 1 8 RY3UHSW. Hardware pack / single sided screen / WM 1 See pg.11-12 for wire management options, alternative leg columns, screens, switches and power options
6
Linear 2-person cluster
Product Number Description qty 1 RYTRGN.0816SM Rectangular worksurface / safety gap 2 2 RY3UW.08 Worksurface support (pair) 2 3 RYUBED.16 E-Beam 2 4 RY3ULESN3. Single sided legs / non-connecting / 700-1200mm (pair) 2 5 RY3UTSG.08. Single sided foot / glides (pair) 2 6 RY3UPS. Single sided spacing plate 1 Function Control RY3UCX3. Standard control box / 700-1200mm 2 RY3UCCB. Control switch / basic 2 RY3UCP.U Control box power cable (UK) 2 RY3UHS. Hardware pack / singe sided 2 See pg.11-12 for wire management options, alternative leg columns, screens, switches and power options
7
Linear 3-person cluster
Product Number Description qty 1 RYTRGN.0816SM Rectangular worksurface / safety gap 3 2 RY3UW.08 Worksurface support (pair) 3 3 RYUBED.16 E-Beam 3 4 RY3ULESN3. Single sided legs / non-connecting / 700-1200mm 3 5 RY3UTSG.08. Single sided foot / glides (pair) 3 6 RY3UPS. Single sided spacing plate 2 Function Control RY3UCX3. Standard control box / 700-1200mm 3 RY3UCCB. Control switch / basic 3 RY3UCP.U Control box power cable (UK) 3 RY3UHS. Hardware pack / single sided 3 See pg.11-12 for wire management options, alternative leg columns, screens, switches and power options
8
Back to back 2-person cluster
Product Number Description qty 1 RYTRGN.0816SM Rectangular worksurface / safety gap 2 2 RY3UW.08 Worksurface support (pair) 2 3 RYUBED.16 E-Beam 2 4 RY3ULEDC3. Back to back legs / connecting / 700-1200mm (pair) 2 5 RY3UXD.08 Cross-beam (pair) 1 Function Control RY3UCX3. Standard control box / 700-1200mm 2 RY3UCCB. Control switch / basic 2 RY3UCP.U Control box power cable (UK) 2 RY3UHD. Hardware pack / back to back 1 See pg.11-12 for wire management options, alternative leg columns, screens, switches and power options
9
Back to back 4-person cluster
Product Number Description qty 1 RYTRGN.0816SM Rectangular worksurface / safety gap 4 2 RY3UW.08 Worksurface support (pair) 4 3 RYUBED.16 E-Beam 4 4 RY3ULEDC3. Back to back legs / connecting / 700-1200mm (pair) 4 5 RY3UXD.08 Cross-beam (pair) 2 6 RY3UPD. Back to back spacing plate 1 Function Control RY3UCX3. Standard control box / 700-1200mm 4 RY3UCCB. Control switch / basic 4 RY3UCP.U Control box power cable (UK) 4 RY3UHD. Hardware pack / back to back 2 See pg.11-12 for wire management options, alternative leg columns, screens, switches and power options
10
Back to back 6-person cluster
Product Number Description qty 1 RYTRGN.0816SM Rectangular worksurface / safety gap 6 2 RY3UW.08 Worksurface support (pair) 6 3 RYUBED.16 E-Beam 6 4 RY3ULEDC3. Back to back legs / connecting / 700-1200mm (pair) 6 5 RY3UXD.08 Cross-beam (pair) 3 6 RY3UPD. Back to back spacing plate 2 Function Control RY3UCX3. Standard control box / 700-1200mm 6 RY3UCCB. Control switch / basic 6 RY3UCP.U Control box power cable (UK) 6 RY3UHD. Hardware pack / back to back 3 See pg.11-12 for wire management options, alternative leg columns, screens, switches and power options
11
* select width only, e.g. 1600mm wide desk = .16
** select height and width, e.g. height 1055, width 1600 = .105516
Screen heights: 1055, 1095, 1105, 1149, 1174, 1205 and 1250mm.
Screen widths: 1200, 1400, 1500, 1600, 1800 and 2000mm. Choose screen width to match worktop.
Leg Columns / Connecting Height Notes RY3ULFSC1. Single sided connecting / fixed 740mm Use with RY3UHSW. RY3ULFSN1. Single sided non-connecting / fixed 740mm RY3ULFDC1. Back to back connecting / fixed 740mm RY3ULESC3. Single sided connecting / electric 700-1200mm Use with RY3UHSW. RY3ULESC4. Single sided connecting / electric 650-1250mm Use with RY3UHSW. RY3ULESN3. Single sided non-connecting / electric 700-1200mm RY3ULESN4. Single sided non-connecting / electric 650-1250mm RY3ULEDC3. Back to back connecting / electric 700-1200mm RY3ULEDC4. Back to back connecting / electric 650-1250mm
Leg Column Feet Notes RY3UTSG.08 Single sided foot with glides Supplied as a pair RY3UTSC.08 Single sided foot with castors Supplied as a pair
Screens Notes RY3VFTS.**F Single sided frameless screen Requires screen bracket RY3SM. or RY3UHSW. RY3SM. Single sided screen bracket RY3VFTB.**F Back to back frameless screen Requires back to back screen bracket RY3SD. RY3SD. Back to back screen bracket GEFSSH. Frameless screen inline connector kit For use on back to back screen only RYMPSH.*SM Single sided modesty panel Melamine (M) or Veneer (W) available and requires
screen bracket RY3SM. RY3VNNS.**H Single sided frameless screen / basic Laminate (L), Melamine (M) or Veneer (W) RY3VNNB.**H Back to back frameless screen / basic Laminate (L), Melamine (M) or Veneer (W) RY3VFNB.** Back to back screen / framed / non-hanging RY3VFNS.** Single sided screen / framed / non-hanging GESE. Screen / finishing Kit To finish non-connecting framed screens GESH. Screen / inline connector kit For connecting linear framed screens
12
*select width, e.g. 1600mm wide desk = .16
Understructure Notes RY3UXD.08 Cross Beam / back to back RYUBF.* E-Beam / fixed To be specified with fixed legs RYUBED.* E-Beam / electric To be specified with electric sit-stand legs RY3UW.08 Worksurface support Supplied as a pair RY3UPS. Single sided spacing plate RY3UPD. Back to back spacing plate RY3UHS. Hardware pack / single sided RY3UHD. Hardware pack / back to back RY3UHSW. Hardware pack / single sided screen /
WM Use on single sided fixed lower WM tray, modesty screen or both
Function Control Notes RY3UCX3. Control box (700-1200mm) RY3UCX4. Control box (650-1250mm) RY3UCA. Anti-collision sensor RY3UCCB. Control switch / basic RY3UCCM. Control switch / memory RY3UCP.* Mains cable * UK (U), Schuko (D), France (F) and Switzerland (S)
Wire Management Notes MM-FLAP01. Access flap edge mounted Requires worksurface access cutout RYWB. Shallow basket RY3WTUN. Upper WM tray / non-perforated RY3WTUP. Upper WM tray / perforated RY3WTDL*. Lower WM tray / back to back * Select standard (S) or high capacity (H) RY3WLDLD. Drop in lid / back to back / lower RY3WLDL*. Hinged lid / back to back / lower * Umbilical positioned on left (L), right (R) or
alternate (A) sides of user RY3WTSLS. Lower WM tray / single sided / fixed Requires hardware pack RY3UHSW. RY3WLSL*. Hinged lid / single sided / lower * Umbilical on left (L) or right (R) of user RY3WU4. Umbilical floor to worksurface RY3WU1. Umbilical floor to WM tray RY3WU2. Umbilical WM tray to worksurface RY3WVDE. Vertical Riser / end condition Placed at the end of a back to back cluster RY3WVDEH. Vertical Riser / end / high capacity Cannot be used with lower WM tray RY3WVDM. Vertical Riser / mid condition Placed between back to back desk clusters
13
Superproduct Description qty RYCX1EXMNU.0612SM Single sided / electric sit-stand / no access / 700-1200mm 1
Product Number Description qty 1 RYTCGN.0612SM 120 degree worksurface / safety gap / no access 1 2 RYUWC.06 Worksurface support / 120 degree (pair) 1 3 RYUEEM.12 E-Beam / 120 degree / electric / mid (contains mid-worksurface support) 1 4 RYUEEH.12 E-Beam / 120 degree / electric / right 1 5 RYUEEL.12 E-Beam / 120 degree / electric / left 1 6 RY2ULEC3. 120 degree mid leg / electric / 700-1200mm 1 7 RY3ULESN3. Single sided legs / electric / 700-1200mm (pair) 1 8 RY2UTS.06 Single sided foot (pair) 1 Function Control RY2UCXC3. 120 degree standard control box / 700 - 1200mm 1 RYUCSM. Control switch / membrane 1 RH1321.30U Power entry cord / clover leaf (3.0m) 1 RY2UHC. Hardware pack / 120 degree 1 See pg.18-19 for worksurface, function control, wire management and screen options.
14
Ratio 120 2-person cluster
Product Number Description qty 1 RYTCGN.0612SM 120 degree worksurface / safety gap / no access 2 2 RYUWC.06 Worksurface support / 120 degree (pair) 2 3 RYUEEM.12 E-Beam / 120 degree / electric / mid (contains mid-worksurface support) 2 4 RYUEEH.12 E-Beam / 120 degree / electric / right 2 5 RYUEEL.12 E-Beam / 120 degree / electric / left 2 6 RY2ULEC3. 120 degree mid leg / electric / 700-1200mm 2 7 RY3ULESN3. Single sided legs / electric / 700-1200mm (pair) 1 8 RY3ULEDC3. Back-to-back legs / electric / 700-1200mm (pair) 1 9 RY2UTS.06 Single sided foot (pair) 1 10 RYUXCD.06 120 degree cross beam / clustered 1 Function Control RY2UCXC3. 120 degree standard control box / 700 - 1200mm 2 RYUCSM. Control switch / membrane 2 RH1321.30U Power entry cord / clover leaf (3.0m) 2 RY2UHC. Hardware pack / 120 degree 2 See pg.18-19 for worksurface, function control, wire management and screen options. NB: Screen options limited. For a back to back screen an under-module screen must be specified and attach to one of the worksurfaces only, using the single sided screen brackets RYSM. Back to back lower wire management unavailable for this option.
15
Superproduct Description qty RYCX3EXMNU.0612SM 120 Cluster / electric sit-stand / no access / 700-1200mm 1
Product Number Description qty 1 RYTCGN.0612SM 120 degree worksurface / safety gap / no access 3 2 RYUWC.06 Worksurface support / 120 degree (pair) 3 3 RYUEEM.12 E-Beam / 120 degree / electric / mid (contains mid-worksurface support) 3 4 RYUEEH.12 E-Beam / 120 degree / electric / right 3 5 RYUEEL.12 E-Beam / 120 degree / electric / left 3 6 RY2ULEC3. 120 degree mid leg / electric / 700-1200mm 3 7 RY3ULEDC3. Back-to-back legs / electric / 700-1200mm (pair) 3 8 RYUXCD.06 120 degree cross beam / clustered 3 9 RYWVC. 120 degree / vertical riser 1 Function Control RY2UCXC3. 120 degree standard control box / 700 - 1200mm 3 RYUCSM. Control switch / membrane 3 RH1321.30U Power entry cord / clover leaf (3.0m) 3 RY2UHC. Hardware pack / 120 degree 3 See pg.18-19 for worksurface, function control, wire management and screen options.
16
Ratio 120 4-person cluster
Product Number Description qty 1 RYTCGN.0612SM 120 degree worksurface / safety gap / no access 4 2 RYUWC.06 Worksurface support / 120 degree (pair) 4 3 RYUEEM.12 E-Beam / 120 degree / electric / mid (contains mid-worksurface support) 4 4 RYUEEH.12 E-Beam / 120 degree / electric / right 4 5 RYUEEL.12 E-Beam / 120 degree / electric / left 4 6 RY2ULEC3. 120 degree mid leg / electric 700-1200mm 4 7 RY3ULESN3. Single sided legs / electric / 700-1200mm (pair) 2 8 RY3ULEDC3. Back-to-back legs / electric / 700-1200mm (pair) 2 9 RY2UTS.06 Single sided foot (pair) 2 10 RYUXCD.06 120 degree cross beam / clustered 2 11 RY2UPD. Back-to-back spacing plate 1 Function Control RY2UCXC3. 120 degree standard control box / 700 - 1200mm 4 RYUCSM. Control switch / membrane 4 RH1321.30U Power entry cord / clover leaf (3.0m) 4 RY2UHC. Hardware pack / 120 degree 4 See pg.18-19 for worksurface, function control, wire management and screen options. NB: Screen options limited. For a back to back screen an under-module screen must be specified and attach to one of the worksurfaces only, using the single sided screen brackets RYSM. Back to back lower wire management unavailable for this option.
17
Superproduct Description qty RYCX6EXMNU.0612SM 120 Cluster / electric sit-stand / no access / 700-1200mm 1
Product Number Description qty 1 RYTCGN.0612SM 120 degree worksurface / safety gap / no access 6 2 RYUWC.06 Worksurface support / 120 degree (pair) 6 3 RYUEEM.12 E-Beam / 120 degree / electric / mid 6 4 RYUEEH.12 E-Beam / 120 degree / electric / right 6 5 RYUEEL.12 E-Beam / 120 degree / electric / left 6 6 RY2ULEC3. 120 degree mid leg / electric 700-1200mm 6 7 RY3ULEDC3. Back-to-back legs / electric 700-1200mm (pair) 6 8 RYUXCD.06 120 degree cross beam / clustered 6 9 RY2UPD. Back-to-back spacing plate 1 10 RYWVC. 120 degree / vertical riser 2 Function Control RY2UCXC3. 120 degree standard control box / 700 - 1200mm 6 RYUCSM. Control switch / membrane 6 RH1321.30U Power entry cord / clover leaf (3.0m) 6 RY2UHC. Hardware pack / 120 degree 6 See pg.18-19 for worksurface, function control, wire management and screen options.
18
Ratio 120 Options
Work Surfaces Notes RYTCGN.0612** 120 degree Worksurface / no access Only one size worktop available
**Square edge melamine (SM) or square edge veneer (SW)
RYTCGAL.0612** 120 degree Worksurface / left access RYTCGAR.0612** 120 degree Worksurface / right access
Wire Management Notes MM-FLAP01. Access flap edge mounted Requires worksurface access cutout RYWTS. Wire Management Tray Upper / Single Sided RYWTC.12 Wire Management Tray / Back to back RYWLC.12 Wire Management Tray Lid / Back to back RYWUS5. Umbilical / Single sided / floor to WM tray RYWUD1. Umbilical / B2B / floor to WM tray RYWUD2. Umbilical / B2B / WM tray to worksurface RYWUD3. Umbilical / B2B / WM tray to WM tray RYWUS4. Umbilical / Single sided / floor to worksurface RYWVC. 120 degree / vertical riser Required to mount WM or screens RYWB. Shallow basket RYWDE. Vertical riser / end condition
Frameless Screens Notes GEFSMNF. Frameless screen / single sided / fabric Requires single sided screen bracket GEFSVNF. Frameless screen / back to back / fabric Requires back to back screen bracket GEFSSH. Frameless screen inline connector kit For use on back to back screen only
Framed Screens Notes GESMNF. Screen / non-hanging / single sided / fabric GESMTF. Screen / top rail hanging / single sided / fabric GESMFF. Screen / face rail hanging / single sided / fabric GESVNF. Screen / non-hanging / back to back / fabric GESVTF. Screen / top rail hanging / back to back / fabric GESVFF. Screen / face rail hanging / back to back / fabric GESE. Screen / finishing Kit To finish non-connecting screens GESH. Screen / Inline connector kit For connecting linear screens RYMPSH. Modesty panel Requires RYSM.
19
Screen Brackets Notes RYSM. Modesty screen bracket / single sided RYSD. Desk up screen bracket / back to back
Function Control Notes RYUCSM. Control switch / membrane RYUCSB. Control switch / TOUCH Basic RYUCSD. Control switch / Digital membrane RH1321.30* Mains Cable * UK (U) and Schuko (D) available RY2UCXC3. Control box (700-1200mm) RY2UCXC4. Control box (650-1250mm)
20
Understructure Chalk White X1
Foot Polished Aluminium PA
Understructure Graphite G1
Worksurface Onyx Grey ONG
Understructure Folkstone Grey 8Q
Screen Kvadrat Hero 601
Pairing Ratio and Layout Studio
Ratio and Layout Studio are designed with a similar aesthetic and work seamlessly with one another when
paired with one another on a floorplate.
Both products can be used to create traditional work environments, agile work spaces, meeting areas,
collaborative team spaces, focussed work environments.
Configuration Living Office Application 1 Layout Studio with meeting end Hive, Jump Space, Workshop 2 Ratio, 2-person cluster Haven 3 Layout Studio 120, 6-person cluster Clubhouse, Haven, Hive 4 Ratio 120, 3-person cluster Haven, Hive 5 Ratio linear desking Clubhouse, Hive, Jump Space 6 Ratio 120, 6-person cluster Haven, Hive, Clubhouse 7 Layout Studio meeting table Workshop, Meeting Space, Cove 8 Layout Studio linear desking Clubhouse, Jump Space, Hive
24
E-Beam / Fixed RYUBF.
Worksurface Support RY3UW.08
Cross Beam RY3UXD.08
Single Sided Non-Connecting Legs / RY3UL*S**.
SS Framed Screen Non- Hanging / RY3VFNS.**
B2B Framed Screen Non- Hanging / RY3VFNB.**
Single Sided Screen Bracket RY3SM.
B2B Screen Bracket RY3SD.
B2B Spacing Plate RY2UPD.
Vertical Riser (mid) RY3WVDM.
25
Wire Management Tray RY3WTDLS. & RY3WTDLH.
Wire Management Lid Drop In RY3WLDLD.
B2B Hinged Lids RY3WLDL*.
WM Tray Non-Perforated RY3WTUN.
WM Tray Perforated RY3WTUP.
Single Sided Hinged Lids RY3WLS**.
Anti-Crush Sensor RY3UCA.
Umbilical Floor to Worksurface / RY3WU4.
26
Worktop RYTCG*.0612
E Beam RYUEF*.
Worksurface supports RYUWC.
Single Sided Non-Connecting Legs / RY3UL*S**.
Single sided screen brackets RYSM.
B2B screen brackets RYSD.
Umbilical SS floor to WM tray RYWUS5
Umbilical WM tray to worksurface / RYWUD2.
Umbilical floor to WM tray RYWUD1
120 vertical riser RYWVC.
Upper WM tray RYWTS.
B2B lower WM tray drop in lid RYWLCD.12
Introduction
Introduction
Introduction
Standalone
Standalone
Standalone
Standalone
Standalone
Standalone
Linear
Linear
Linear
Linear
Linear
Linear
Glossary of Ratio Components
Glossary of Ratio Components
Glossary of Ratio Components