rasp what is the rasp? rasp = regional atmospheric soaring prediction localized high resolution...
TRANSCRIPT
RASP
What is the RASP?
RASP = Regional Atmospheric Soaring Prediction
Localized High Resolution Blipmap style forecasts
Blipmap = Boundary Layer Information Prediction Map
The developer of both “Blipmaps” and the RASP: Dr. John Glendening, alias “Dr. Jack”.
Research Meteorologist with Naval Research Lab in Monterey.
Specializing in “Boundary Layer Meteorology” - studying the turbulent atmospheric layer created
by thermals and other surface-based eddies.
Glider Pilot
Blipmaps look like the following slide, which gives the height of expected thermals for the
California/Nevada region.Blipmaps plot data from the RAP and NAM
computer models. Other Blipmap “parameters” available as this kind
of blipmap plot include:Thermal Strength
Bouyancy/Shear Ratio – whether wind shear will be strong enough to “disrupt thermal structure”
B/L Convergence.The presence or absence of cumulus clouds.
Cloudbase of cumulus clouds, if present.“Over-development” - overcast, thunderstorms
Surface Temperature.Surface Winds.
Blipmaps look like this:
RASP uses another computer model called the WRF- “Weather Research and Forecasting Model”, that is
set up to run physics related “equations of motion” on a Linux computer. These are complex “partial
differential” equations. The WRF was developed by the NOAA, but is owned and was paid for by you, the
taxpayer, and is available to the public. The “sourcecode” is written in FORTRAN. Dr. Jack
compiled the sourcecode to run on the free operating system called “LINUX”, an open source version of
UNIX. The WRF model of the RASP is “initialized” by taking output data from other government computer
models. In the U.S., we use the ETA, a variant of the NAM to initiate it, in Europe, they use the GFS model. Other models can be used by some skilled operators, such as the ECMWF. An individual operator has to set up a “Domain” to define the region of interest, and set
the desired “grid resolution”, among other things.
Generally, the different computer models used to initiate the RASP can store their output for historical purposes, or it can be used to
“initiate” other computer model runs. One model can be initiated with output data from
another model. This is done by using a common binary data file format called a “GRIB”
(Gridded Binary) file. The government publishes GRIB files for all the computer models it runs on publicly accessible FTP and web sites
at regular intervals within a short time of their production. The RASP initiates with GRIB file
data from the ETA, and runs a forward prediction using the WRF model.
The output from the WRF model is saved. The RASP then uses a government plotting
language called “NCL” (NCAR command language) to generate the various “blipmaps”. Dr. Jack developed some of his own computer code to develop useful custom “parameters” for glider pilots from the WRF output, and his own
NCL code to plot the associated blipmaps.
Ten reasons to use a BLIPMAP
Easily interpreted, requiring little meteorological background
Relevant predictions, what a soaring pilot really wants to know
Supplies information not available on meteorological weather sites
Quickly evaluated using its graphical presentation map
Covers an entire region, including elevated terrain
Has been verified by actual pilot experience
Available on the evening prior to the flight
Uses the latest meteorological observations, updated through the night
To anticipate route legs having more difficult conditions and how the soaring day will begin and end
To avoid missing a great soaring day
NAM “North American Mesoscale” Used for older Dr. Jack Blipmaps
Forecasts out to 84 hours
Available only for two hours each day
Updated at 6 hr intervals
For same forecast period,NAM available ~1hr later
12 km horizontal resolution
Poorer vertical BL resolution
RAP - “Rapid Refresh”Used for older Dr. Jack Blipmaps
Forecasts out to 12 hours
Available for five hours through day
Updated at 3 hr intervals
For same forecast period,RAP available ~1hr earlier
20 km horizontal resolution
Better vertical BL resolution
RASP is a higher resolution, more localized version of the NAM and RAP Blipmaps, that Dr. Jack had already been giving us (and still is!).
RASP is set up at a resolution of typically 4km vs 12 km of the NAM, and 20Km of the RAP. The computing power required to do this higher grid
res. for a large area of the CONUS exceeds what is available to personal, or even NOAA computers. Doubling the grid resolution of a
model requires eight times the computing time. Therefore, Dr. Jack came up with the idea of “farming out” or distributing the job of running local RASPs for popular soaring locations to
individual enthusiasts to do on their own machines - similar to the “SETI” project.
Whereas the "DrJack" RAP and NAM BLIPMAP soaring forecasts available in the U.S. are
obtained by post-processing files output by the "equations of motion" meteorological models run by the U.S. Weather Bureau, RASP BLIPMAPs
are obtained by independently running an "equations of motion" model by a soaring-
weather enthusiast who has installed the freely-available RASP program on their local PC. This
independent run has many advantages over reliance on government-run models:
RASP forecast grids allow higher resolution than provided by government models. The full
influence of topographic features can be ascertained.
RASP provides full control over output times, plotting, area covered, etc. This allows
operators to specifically tailor forecasts for their local region.
RASP BLIPMAP plots provide soaring-specific thermal forecasts, the parameters soaring pilots want to know, which government forecasts do
not. RASP predicts mountain wave updrafts, which
government forecasts cannot (this requires high resolution, 1-6km, so wave bars are resolved).
RASP forecasts can go out to +2 days, or longer, depending on which model is used to initiate the WRF RASP runs. RASP can go out 84 hours if
initiated by the NAM, or up to 10 days with a GFS initiated run. Dr. Jack feels that runs going out more than +2 days are not accurate enough
to be of much use.
RASP operators have to set up their own individual websites in order to display their
forecasts for mass consumption. You will not see a lot of uniformity amongst most RASP sites
in terms of the web based user interface, although Dr. Jack does supply a basic web user interface model with his RASP Linux installation kit. A long flight along the convergence, such as
from Hollister to the Mexican border, would cover several individual RASP domains, often with each one having a different style web user
interface, making it somewhat more inconvenient to use for planning a very long
flight.
RASPs only cover areas of the world where an individual enthusiast/operator has chosen to
take on the task.The West coast, including N. California, S. California, Nevada, parts of Arizona, Oregon
and Washington, the Front Range area of Colorado are well represented, as is Hawaii. The East coast, centered around the northern and central Allegheny Mts., is covered pretty well, but there are many other popular soaring
areas that are not covered by RASP at all at the present time.
Examples of RASP in use. Saturday, Aug 9, 2014 was a good soaring day. I
thought I would show some RASP related weather forecast related stuff that may help explain what was going on, and also help
newer soaring pilots see an approach you can use yourself to get an idea what the soaring
weather may be like - either the night before you come out, or early the in the morning on the
day you are going to fly. I have links to these things and more on the "Sierra RASP" site at:
http://canv.raspmaps.com/RASP/SIERRA/FCST/RASPtable.html
The RASP is a small scale, detailed forecast for a rather localized area. Before going to the RASP, you should always try to get the “big picture” or the “synoptic scale” weather picture. You can
get this from looking at more generalized, larger scale weather forecasts, on television, or from
the NWS at http://nws.noaa.gov. Remember, the RASP sites are not official weather briefing
sites for purposes of satisfying the FAR requirement for a preflight weather briefing
(mainly because they do not include things like TFRs, NOTAMS, AIRMETS, SIGMETS etc.),
but they can be helpful for monitoring the weather for possible soaring on an upcoming available weekend, up to a few days ahead.
The NWS “Forecast Discussion” for the region, combined with the GFS computer model
forecast plots for the 500 mb heights and "vorticity", which also depicts the "Steering
Winds" at about 18,000ft., will give you a good idea of the overall larger scale "Synoptic"
picture. In other words, what the larger size air mass movements and pressure center changes
are doing that will be affecting the weather in our region. The RASP soaring forecast, which we all like to look at, does not show you this
larger scale synoptic level picture, although the RASP is highly affected by the synoptic level situation. So, you should start by getting the
overall synoptic level picture in your mind first, then go to the RASP. You'll get more out of it.
Satellite Images are helpful for visualizing the synoptic picture described in the forecast
discussion, particularly water vapor images, which the professional forecasters seem to use a lot, along with the computer model forecasts, such as the GFS (Global Forecast System), the NAM and the ECMWF. Recently a new model called the HRRR became available. The GFS
usually works pretty well, and most of the time the computer models tend to agree, but
occasionally they do not. The forecasters will often comment on these computer models in the forecast discussions, so it's fun to try to become
familiar with what they're talking about.
Once you get the "big picture" from the synopsis, it's time to start looking at the RASP.
These plots are from Bart's Avenal RASP. The Boundary Layer Top plot shows you the highest level the thermals are expected to go. This one is for 1400 PST, or 1500 PDT. The
BL Top usually can not be reached by the average Joe glider pilot in a 2-33, I won't
mention any names. However, I often find that if I ask the top pilots in their glass and carbon fiber ships how high they got on a given day, again, I won't mention any names, they very often reach
almost exactly what the maximum BL Top forecast is on the RASP. For orientation,
Avenal is No. 1 on the map, and Coalinga is No. 2.
Winds combined with the effects of terrain, have a strong association with areas of
"convergence", which is generally very desirable, as it is associated with stronger lift
and lift that is lined up that can be "run" to cover a lot of ground with less need for stopping to
circle. Strong winds tend to break thermals up into bubbles and disorganized turbulence, and are generally considered a negative for thermal
soaring. Lighter winds are more favorable to thermals in general. Winds also very important
if you are considering using ridge lift and avoiding sink associated with wind blowing
downslope. They are also very important along with terrain in wave formation.
The next plot is what Dr. Jack, the inventor of the RASP calls "BL Max Up/Down Motion". That is "Dr. Jack speak" for what most of us now call
"Convergence". In the old days we used to call this same thing a "shear line". You will hear those last two terms frequently around glider
pilots. You will not likely hear "BL Max. Up/Down Motion", unless maybe Dr. Jack is visiting!
Values above zero are good, and indicate lift from convergence. In all Dr. Jack's plots,
warmer colors tend to be stronger or often "good", and cool colors tend to be lower values and often "bad". The exception may be winds, where warmer colors indicate stronger winds, which is usually bad for thermal soaring, but
may be good for wave soaring.
You can see an interesting phenomenon related to the convergence line in the next plot. If you look south of Avenal, where the Cottonwood
pass allows marine air to spill through the mountains, you can see the yellow colored
convergence line bowing out to the East towards the central valley, probably East
beyond I-5. This happens pretty frequently. So if you are coming back from the south towards Avenal, you may have to detour out to the East from the straight line course back to Avenal in
order to say in the convergence line.
The area to the West of the bowed out area will likely be marine air, that is more stable and likely to be devoid of thermal lift. The wind to the West of the convergence line will tend to be stronger out of the West, especially East of Cottonwood
pass, or other low points in the Diablo and Temblor ranges. If you look further North, up by
the Pacheco Pass area, you will see an even more pronounced bulging of the convergence to the East. It bulges out East to the point where it
appears the convergence line is completely “blown out”, or disrupted to the East. This
correlates with the much stronger winds coming through the Pacheco Pass compared to the
Cottonwood Pass at this time.
The next plot shows Thermal updraft velocity plotted along with what is called, in what I call
“Dr. Jack Speak”, the "Buoyancy Shear Ratio". In more plain English, what this tries to show is whether wind will be so strong as to cause the
thermals to be broken up into bubbles or turbulence, that is difficult for soaring pilots to
use (bad). Or, looking at it the other way, whether the wind will not be strong enough to to the same (good). If you see areas that appear
stippled, expect that the wind will be strong enough to cause the thermals to be "broken up"
or changed into difficult to use bubbles and turbulence rather, than nice steady chimney-
like columns of rising air.
Another very useful plot is the "Cu Cloudbase where Cu Potential > 0". Don't be put off by the
Dr. Jack speak title. This is one of the most useful of the RASP blipmaps. What it basically shows is if there will be cumulus or not, and if
there are cumulus clouds, what will be the altitude of the cloud base. You can see from
this plot that it was clear over the Avenal area, but to the South around the New Cuyama area,
there were forecast to be cumulus with a cloudbase of approximately 10,500 MSL.
Morgan and Julie were considering making a run towards these clouds, which Morgan
discussed on the SoarAvenal Blog for this date.
This is a Skew-T/LogP sounding forecast for Avenal at 1400 PST. Weather balloons are sent aloft at certain locations, directly measuring the temperature, dew points, and winds at altitude, radioing values back to the NWS, which plots them on the same Skew-T/LogP graphs. This
Skew-T plot produced by the RASP is a FORECAST of what such a balloon would
measure IF you were to release one at this time of day. You can extract much useful information from these Skew-T forecasts, once you learn how to read them. They can show high level clouds, such as cirrus clouds, which do not
show on any of the other RASP plots, but which can affect the heating at the surface and the
accuracy of the RASP forecasts.
If there is likely to be precipitation, it will also show in these RASP Skew-T plots. This
particular Skew-T plot however, does not show any high level clouds or precipitation. It also
does not indicate that there will be any cumulus clouds or over-development type of clouds, such as overcast or thunderstorms. In other words, it
is saying the sky will be clear, which it was!
Below is another RASP Skew-T sounding forecast for the same date and time as above, but for the
Mt. Whitney area, where there were some cumulus build ups and some “over
development”. You can see how, when there are cumulus, the temperature and dewpoint
lines will tend to merge at the altitude where the cloudbase is forecast. You can also see a black box-like area on the left side, and inside that, a small green line. The black box area indicates
the altitude and thickness of the cloud layer. The green line area indicates there could be
precipitation. Precipitation may not reach the ground. Or, it could be in the form of snow, if
the conditions are right.
The RASP can show waves. In the following slide, you can see a primary wave being predicted on the lee side of the Sierra Nevada range on the sample Vertical Velocity at 500mb plot. On this forecast, you do not see any secondary waves
but sometimes they are predicted, and will show as multiple “wave bars” downwind of the mountain generating the wave. The blue color
indicates sink and the reddish colors indicate lift.
The Vertical Velocity at Vertical Velocity Max plot will give you a cross sectional depiction of the
wave along a line in a direction where the computer model calculates the maximum wind in the forecast area. It is also possible to select a fixed point on the surface, and have a cross
sectional plot like this made in a desired direction regardless of the wind strength and
direction. I do not have a good example of that to show you, but Bart has that type of plot set
up for Black Mtn. In the Diablo range near Avenal on his Avenal RASP.
The future beyond the RASPRecently the government has officially launched a
new computer model called the HRRR, for “High Resolution Rapid Refresh”. This model is run for the entire CONUS at a 3km resolution, which is actually higher res. than most typical 4km res. RASP set ups. It displays quite a few plots that are very similar to RASP plots, such as surface temperature, winds etc. It displays certain other
things the RASP does not even know about, such as predictions of RADAR plots, including
ECHO tops. Some RASP-like information, such as wave activity, can be gleaned from it. It has nothing like the Cu Cloudbase where Cu Pot. >
0. It only goes out 15 hours, which is a pretty big disadvantage.
Ultra High Resolution RASPThe RASP is capable of running at very high
resolutions, which can resolve atmospheric events with a sometimes astounding degree of
accuracy. It does require an exponential increase in computer power to run at these very high resolutions. For example, during the 2013 World Soaring Championships at Uvalde, there was one day where a “Mesoscale Convective
Complex” was forecast by standard techniques to occur to the North of Uvalde over the higher
plateau in that direction. The tasks were therefore called such that the competitors were
sent on tasks to the South, in order to avoid this area.
However, late in the day, as the competitors were making their way back to the NW on the last leg of their tasks, a very large outflow boundary had
poured out of the mesoscale complex to the North and spread out to the South,
accompanied by cold stable air, high winds and blowing dust. Gliders that managed to finish
before the rather sharply defined outflow boundary arrived at Uvalde were safe, However, many gliders, only a little bit later, encountered
the cold stable air, precipitation, and strong headwinds behind the outflow boundary, and
were unable to get back to Uvalde. There was a mass land out, with gliders scattered over miles
of country side to the SE of Uvalde that afternoon.
There was a RASP enthusiast named Elmer Joandi in Europe, who was running his own very
high resolution .7km grid resolution RASP domain for the UVALDE contest area that day. He had predicted the arrival and timing, within less than one hour, of the arrival of the outflow
boundary from the mesoscale convective complex at the Uvalde airport. He was not
publicizing the fact that his RASP was running, except to a small group of RASP enthusiasts on
Dr. Jack's RASP discussion group. He has a very powerful computer system available to him in order to have set up a RASP domain to run
at the ultra high resolution he was using.
Radiometrics Corporation installed an MP-3000A microwave radiometer at Garner Field in
Uvalde, Texas, to support the World Gliding Championships. Data from the radiometer
provided pilots and event planners real-time radiosonde equivalent atmospheric soundings
and forecast indices. Radiometrics' Mike Exner, an experienced glider pilot, explained: “Without the radiometer data, weather forecasters for the
championships would rely on soundings from the 7AM and 7PM (local) radiosonde launches from Del Rio, 70 miles to the west. The MP-3000A will provide temperature and humidity
profiles up to 10 km that are equivalent to radiosondes, but updated every three minutes,
rather than only twice-daily.
Real Time, Inflight Weather Information with ground based support
2014, Gordon Bettger and Hugh Bennet, DuoDiscus, take off at Minden, NV. Using wave
lift at several points along their route, they reach Wyoming. Used an inflight network based means of communication with ground support
by Weather Forecaster Walt Rogers, who many of you have met at our CCSC spring contest. Walt was able to use the HRRR to give them
information about making course corrections to find wave along their route. Getting real time inflight information like this in contests was
always prohibited in contest flying, but recently, contest officials have decided to no longer ban
receiving this type of information inflight.