rapid chrome wine rack leaflet · rapid chrome wine rack important - assembly instructions...
TRANSCRIPT
Chrome wine rack
Assembly instruction
AIC001
RAPID CHROME WINE RACKIM
PORT
AN
T - A
SSEM
BLY
INST
RUCT
ION
S COMPONENTS
ASSEMBLY1 Take a chrome upright A and 2 shelf clips C.
Locate the shelf clips in the bottom ring of the upright.Ensure the clips are firmly located in the upright ring and the clip is tapering upwards (thin end at the top).
2 Repeat 1 for all 4 uprights.
Tools required: Rubber mallet A 1270mm Chrome
upright – 4 of
C Black Plastic ShelfClips – 56 of
3 Place a shelf B over the uprights ensuring theshelf fits over the clips. Tap the shelf with a mallet to tighten on the clips.
4 Take 2 shelf clips C and place on an upright toshow 6 clear rings between the bottom of theclips and the top of the bottom shelf.
B 915mm x 355mm shelves – 7 of
5 Repeat for the other 3 uprights.
6 Repeat 3.
7 Repeat for the remaining shelves but note that the space between the top shelf and the shelf below is only 5 rings on the upright.
8 Load the unit with the bottom, sit back and enjoy your wine.
If you have any problems whatsoever please call 01285 686868 where a team of experts will be pleased to help.
AIC001