RAMPS & RACKS

PPHU Larisa is a reliable business partner which provides design engineering and production of state-of-the-art components for transport vehicles.

PPHU Larisa develops new products and continuously upgrades its proprietary solutions for rail and other vehicles. For over a dec-ade, PPHU Larisa has been providing its products and services to Europe and developing its sales on the markets in Asia and Africa. The advantages of PPHU Larisa include a flexible approach to customer needs, short lead times, and competitive pricing.

RESEARCH AND DEVELOPMENT:

PPHU Larisa is a manufacturer of state-of-the-art, high-quality products which fully satisfy the customers and users. PPHU Larisa approaches each purchase order individually. The engineers at PPHU Larisa always provide unit calculations, examinations and tests for every product type. Each solution proposed and deliv-ered by PPHU Larisa is thoroughly tested for compliance with ap-plicable industry standard and custom requirements.

CUSTOM PROJECTS:

Apart from the finished solutions presented in this Catalogue, PPHU Larisa can deliver custom projects according to your speci-fications. PPHU Larisa can manufacture and deliver products con-sistent with your design, or provide a complete cycle of design en-gineering, development and production to deliver completely new products by its design engineers and industrial design experts.

QUALITY:

The focus of business of PPHU Larisa is to assure superior quality of its products, complete with the best state-of-the-art solutions for the full compliance with the necessary approval and certifica-tion.

Portable ramp for all vehicle types (including Diesel and elec-tric train units). The ramp features the proprietary Larisa® RubberFooting system which provides anti-slip and anti-vi-bration protection. The ramp has guardrails on both sides and a FastLock closure, comprising a strong and simple Velcro-secured strap.

Robust and reliable design and operation are guaranteed with non-corroding materials.

The ramps are accredited and certified by the research body at the Railway Institute in Warsaw as TSI PRM compliant products.

PPHU Larisa provides competitive prices and a great flexibil-ity of custom design.

easy access for the mobility-challenged;

designed for wheelchair users

lightweight

safe operation

TSI PRM compliant

easy, quick and cost-efficient installation

in the vehicle

custom ramp length and width available

1

weight ± 0.3 (kg) 6.5 to 20

length ± 0.3 (mm) 700 to 2100

width (mm) 760 to 860

guardrails on both sides

load capacity (kg)

walking surface

up to 350

anti-slip mat

handling carrying handle

safety features

installation dimensions (mm) w 230/85; l 700-2200

Ramps: Flip-open ramps Pull-out ramps Folding ramps Power ramps

1

Portable ramps are easy to move and deploy at every location of use.The onboard portable ramps can be deployed inside the access doors on both sides of the vehicle to save space, reduce the operating costs and reduce the vehicle service weight.Portable ramps can also be stowed on railway stations and platforms and readily moved to their deployment sites. The portability of the ramps manufactured by PPHU Larisa enables their use in an infrastructural environment incompat-ible with current regulations and standards.

Since its origins in 2006 and the development of the first line of access ramps, PPHU Larisa has been focused on designing and delivering products which are safe and easy to operate with a low unit weight and a high durability. Add a great con-venience in operation by female personnel of transport vehicles, and this line of products leaves the competition behind.With the experience gained on EU markets, PPHU Larisa created the EasyAccess® line of products that can be effortlessly, conveniently and safely operated by the transport vehicle personnel, with full confidence and satisfaction of the passenger groups they are dedicated to.The flagship products showcased in this Catalogue are complemented by the high capabilities of PPHU Larisa in custom design engineering and production which stem from a profound experience and enable custom delivery from scratch or by modifying the existing products in the range of PPHU Larisa.

With the care for your passengers in mind, all ramps manufactured by PPHU Larisa meet the current applicable regulations and standards, including the following EU interoperability directives:

TSI PRMUICDIN 32985DIN 51130EN 45545

2

Ramps

Portable ramps

safe operation easy, quick and cost-ef-ficient installation in the

vehicle

1

lightweight

The Type LWXX-04 ramp is the lightest portable ramp. When folded, the portable ramp becomes a suitcase-sized object the convenient handle and a low weight of which facilitates carrying to a considerable distance and easy operation, espe-cially by female personnel.The ramp is accredited and certified by the research body at the Railway Institute in Warsaw as an TSI PRM compliant product.The Type LWXX-04 ramp features the proprietary Larisa® RubberFooting system which provides anti-slip and anti-vi-bration protection. The ramp has guardrails on both sides and a FastLock closure, comprising a strong and simple Velcro-secured strap.

The Type LSXX-02 portable ramp has been designed for passenger rail wagons and buses. This model is dedicated to wher-ever the ramp length must exceed 200 cm and the vehicle floor height above the platform level is extremely large.This ramp model is available with any custom length up to 3.5 m.Passenger rail wagon ramps can feature optional security latches for attachment to the vehicle structure. An optional wheel-chair platform is available for negotiation of onboard stairs.

The ramp can be optionally integrated with a gas-spring oper-ated rack to facilitate storage and deployment. This solution provides operating convenience especially to the female per-sonnel.The Type LSXX-02 ramp features a minimalist design and an intuitive and easy operation

Anodized aluminium parts make the product robust and fit for long, heavy duty operation.The ramp length and width depend on the custom order.PPHU Larisa provides competitive prices and a great flexibility of custom design.

6,5 to 20

700 to 2100

760 to 860

up to 350

w 230/85 l 700-2200

Ramp specifications

TYPE LWXX-04

TYPE LSXX-02

29,8

1285

760 to 860

up to 350

3

weight ± 0.3 (kg)

length ± 0.3 (mm)

width (mm)

load capacity (kg)

walking surface

handling

safety features

installation dimensions (mm)

guardrails on both sides

anti-slip mat

carrying handle

weight ± 0.3 (kg)

length ± 0.3 (mm)

width (mm)

load capacity (kg)

walking surface

handling

safety features guardrails on both sides

anti-slip mat

carrying handle

TYPE P95-01 The Type P95-01 stationary folding ramp installed in the floor of the vehicle is the traditional and most popular type of ramps for tram cars and buses. Its key features include exceptional ease and quickness of deployment and storage. The dedicated gasket between the ramp flap and tray effectively protects the ramp from the ingress of water. The ramp is made from lightweight, self-passivated materials for a guaranteed durability.The ramp features the proprietary Lari-sa® RubberFooting anti-slip system.To provide maximum safety of passen-gers, the ramp also features an NC 24-volt induction sensor to indicate the ramp position on the driver’s control desk.

The stationary ramps are the ramp models permanently installed in the vehicle as their operating site, which reduces the deployment time as compared to the portable models. The stationary ramps are usually integrated with the vehicle floor. Their primary applications include tram cars, buses, trol-leybuses, and suburban commuting trains.The ramps can be integrated with:

w podwoziu (wysuwane spod podłogi)w podłodze (stanowią część podłogi)szafce przy drzwiach (związane przegubem).

1

movable platform section length (mm) 990

movable platform section width (mm) 1070

w 1140/ l 1153/h 67

anti-slip mat

load capacity (kg)

features

open position signal

up to350

deployed from the vehicle floor

24 V NC induction sensor

walking surface

whole ramp weight ± 0.3 (kg)

lifted platform weight ± 0.3 (kg)

27

13

installation dimensions (mm)

Ramp specifications

4

Stationary ramps

easy access for the mobility-challenged;

designed for wheelchair users

lightweight

custom ramp length and width available

TSI PRM compliant

easy, quick and cost-efficient installation

in the vehiclesafe operation

installation dimensions (mm) w 1150 x l 1368 x h 68

TYPE R09-02 A stationary ramp integrated with the chassis (and used e.g. in the Jazz Duo tram cars in Warsaw).The design of the Type R09-02 ramp is a response to the demand for a simple, budget-friendly and reliable access solu-tion operated by the driver. The innovative concept of the ramp extension from beneath the vehicle chassis, instead of the traditional hinged flap action, has been instantly acclaimed by those vehicle operators who value ease of vehicle sanitation and a high efficiency of onboard features.This ramp type extends from underneath the vehicle floor, so the integration does not require any joints or seams within the door area and the cabin floor does not lose its water-proof performance.The ramp is made from lightweight, self-passivated materials for a guaranteed durability.The ramp features the proprietary Larisa® RubberFooting anti-slip system. To provide maximum safety of passengers, the ramp also features an NC 24-volt induction sensor to indicate the ramp position on the driver’s control desk.

Ramp specifications

1

movable platform section length (mm) 910

movable platform section width (mm) 910

anti-slip mat

load capacity (kg)

features

350

pulled out from under the vehicle floor

walking surface

whole ramp weight ± 0.3 (kg) 40

pull-out platform section weight ± 0.3 (kg) 11

5

TSI PRM compliant

easy, quick and cost-efficient installation

in the vehicle

lightweight

easy access for the mobility-challenged;

designed for wheelchair users

safe operation

custom ramp length and width available

6

RacksPPHU Larisa designs and manufactures luggage racks and shelves for the rail vehicles. The manufacturing process is based on innovative and patented solutions, including aluminium extrusion process. This makes the products from PPHU Larisa light in weight, ex-tremely durable, and complete with a sleek, contemporary finish. The shelving from PPHU Larisa is safety-focused luggage storage solutions which meet the stringent rail-way engineering standards. They can also be adapted to accommodate directional and decorative lamps, seat booking systems, or advertisement carri-ers.

low weight

anodized coating for a high scratch

resistance easy to clean

high strength

Lugg

age

shel

f for

PES

AFo

r the

ELF

2 tr

ain

7

TYPE LRXXX-01 SHELFA luggage shelf made from aluminium shapes and a tempered glass pane. The lattice brackets of the shelf provide a low weight of the product with a high mechanical strength and durability. The ex-trusion process provides an optimised weight distribution along the bracket cross-section. The innovative approach applied in the design process for the Type LRXXX-01 luggage shelf resulted in the back shape which can replace the wall cladding at the instal-lation location and a safe back stop for the stowed luggage to reduce the overall weight of the outfitted vehicle. The front shape is a structural member; the handrail-like form provides a safe handhold for the passengers. The luggage shelves and racks from PPHU Larisa stem from high-tech design and manufacturing processes.

The design engineering process of this product included a countless FEM (finite element method) strength calculation runs to optimise the weight with a high safety factor. The glass pane and anodized extruded shapes form an ultra-lightweight, sleek and aesthetically refined luggage shelf with a sturdy, scratch-resist-ant finish.The handrail-like front shape can be powder-coated in any RAL palette colour, which, combined with the glass pane tint, facilitates a harmonious blending with any vehicle interior colour pattern.The luggage shelves from PPHU Larisa can be freely customized and decked with any material, including tempered glass, metal sheet, or infill bars.See the product examples below:

TYPE LRXXX-02 SHELFThe Type LRXXX-02 luggage shelf is the peak evolution in design engineering and technology by PPHU Larisa. The objective of the design engineering project was to deliver an ultra-lightweight lug-gage shelf with scratch resistance and easy and low-cost mainte-nance. The design engineering process of this product included a countless FEM (finite element method) strength calculation runs to optimise the weight with a high safety factor. The project objectives were achieved with advanced manufacturing processes (die casting, aluminium shape extrusion, CNC machining, and anodizing).

8

TYPE LRXXX-10 SHELFThe glass pane and anodized extruded shapes form a sleek and aesthetically refined luggage shelf.These high-quality products are manufactured with CNC tools (in-cluding laser cutters, bending brakes and milling machines).The anodizing process provides the aluminium parts with an extremely hard oxide layer which significantly enhances the scratch resistance.The front shape is ergonomically designed to provide a handhold. The back fascia conceals the wall fas-teners and protects the wall cladding in the cabin from scratches and dents.

Possible manufacturing options:fully customized design any deck type: infill bars, tempered glass, or metal sheet.

9

Przedsiębiorstwo Produkcyjno-Handlowo-Usługowe„LARISA”87-800 Włocławek, ul. Spokojna 58A

phone./fax: 0-54 413-50-70 mobile: +48 504 008 614e-mail: biuro@larisa.pl

www.larisa.pl

RAILWAY INSTITUTE:

- Climatic tests; - Strength and electrical efficiency tests; - Electromagnetic compatibility tests.

INSTITUTE OF AVIATION

- Impact resistance tests;- Vibration resistance tests.

THE TESTS OF OUR PRODUCTS CERTIFIED BY THE

In 2013, LARISA implemented an ISO 9001 Quality Management System.