railway - telford55.comtelford55.com/wp-content/uploads/railway-catalog.pdf · construction –...
TRANSCRIPT
RAILWAY
2012
CONSTRUCTION – GENERAL CONSTRUCTION
CONSTRUCTION – QUICK HITCHES & BUCKETS
CONSTRUCTION – TILT ROTATORS
CONSTRUCTION – LANDSCAPING & SNOW REMOVAL
CONSTRUCTION – UTILITIES
SCRAP PROCESSING
DEMOLITION
MATERIAL HANDLING
RAILWAY CUSTOM UNITS
kinshofer Worldwide
What has now become a worldwide operating company once started in a small garage in the Bavarian uplands. Innovation and quality have made the company what it is today: a global player in the construction industry. Kinshofer can count on a range of subsidiaries and sales offices worldwide to promote its products.
Kinshofer France S.A.R.L. FRANCE
1986
Kinshofer Aponox Oy FINLAND2009
Kinshofer North America CANADA2000
Kinshofer UK UNITED KINGDOM1984
Kinshofer GmbHHeadquarters Marienstein, GERMANY1971
DEMAREC B.V. THE NETHERLANDS
2006
RF-System ABSWEDEN2011
Darda Kinshofer Construction Machinery Co. Ltd.
PR CHINA2008
A History of Quality and Success For more than 40 years we have specialized in the development and construction
of quality attachments for cranes and excavators. Within the industry, our name has become synonymous for innovation, quality and reliability!
ALWAYS IN MIND – OUR CLIENT‘S NEEDS
THERE IS NO ALTERNATIVE TO QUALITY
KINSHOFER GmbH is one of the leading manufacturers of attachments for loader cranes and hydraulic excavators, as well as for rotators, tilt rotators and rotary actuators. The headquarters of the medium-sized company is located in the Bavarian village Waakirchen/Marienstein, Germany. • August 4, 1971: Originally named KINSHOFER Maschinenbau Miesbach, the company was founded by Alfred Kinshofer on in Miesbach, Bavaria, Germany. At the beginning the small business only produced bridge bearings, handrails and accessories for brick factories, such as tunnel kiln trucks or lifting and lowering devices for tile presses. Two years after the company‘s founding, the development of the first brick stack grapple began. Just one year later, the construction of a pallet fork and a clamshell bucket followed. • 1975: As the capacities of the original factory had been exhausted, a new plant was built in eastern Miesbach. Only two years later, this building had grown too small again, so a second building was constructed with additional office buildings. • 1979: The company‘s first rotator with 360° endless rotation was developed.• 1980: The Company changed its name to KINSHOFER Greiftechnik GmbH, and the first sales activities in the United States and the UK took place.• 1984: the first foreign sales subsidiary of the company was founded in Stockport, Cheshire, England: KINSHOFER UK Ltd.• 1987: Alfred Kinshofer sold his shares in, but kept being a worthy consultant for the company. The same year, KINSHOFER France was founded in Strasbourg, France.• 1997: Planning began in for factories in the Austrian village of Gmünd and the Czech Ceske Velencie, and one year later MARS Greiftechnik was founded and production started.• 2000: KINSHOFER made the step overseas and acquired the Canadian company Liftall which was to become the subsidiary KINSHOFER North America• 2003: A major milestone for KINSHOFER occurred: the development of the patented HPXdrive that bestowed the if-Silver Award for ”Product Design“ in the ”Industry“ branch upon the company.• 2006: The company finally got its current name: KINSHOFER GmbH. The same year, the Dutch specialist for demolition and recycling tools, Demarec B.V., was acquired.• 2007: The worldwide operating Swedish company, Lifco AB, acquired KINSHOFER GmbH.• 2008: Another logical consequence was the expansion to the east, and so the company Darda KINSHOFER Construction Machinery Co. Ltd. was founded in the Chinese capital of Beijing. The same year marks the foundation of KINSHOFER Aponox Oy in Hämeenlinna, Finland, with the main focus on NOX Tilt Rotators.• 2011: KINSHOFER acquired the Swedish company RF-System AB., providing an extensive line of attachments for the Railroad industry, in addition to attachments and couplers for the Construction industry. • 2012: Intellectual Property and distribution rights were acquired from the New Zealand company, Wedgelock Equipment Ltd. These rights further expanded KINSHOFER’s offering in the Construction segment.
KINSHOFER counts on a high vertical integration. The products are designed in the proper development department, constructed and finally tested in the in-house test laboratory. Thus the company retains control not only over the production, but also the product itself.Constant communication and information exchange between the company and its clients results in further developments and innovations that keep the company close to the customer. In the Action Park at the company‘s headquarters, there is also the possibility for dealers and clients to take part in training and tool demonstrations.
Always close to the client – up front, everywhere . . . .
Many Applications - One Solution: kinshofer Over 40 years of experience as well as involvement with en d users in the development process, combined with the latest engineering tools, have led to KINSHOFER‘s comprehensive product range.
Scrap Metal Scrap Tires Scrap Rails
Scrap processing has become an increasingly important concern throughout the world. Scrap metal has to be cut, broken, handled, separated, processed and recycled, similar to plastic, glass, and tires.Rail scrap processing is just one important part of the large scrap industry.At KINSHOFER you will find the perfect tool for your task, no matter if you want to cut beams, rails, tires, containers, tanks or entire ships! Entrust KINSHOFER with your scrap processing task – we will find the perfect solution for you!
Within the range of attachments for construction, you can find different and versatile tools made by KINSHOFER for tasks from landscaping to road construction. Buckets and Clamshell buckets for different ope-rating weights and in different widths, suitable adapters and quick hitches are part of the product range as well as smaller demolition and sorting grabs, multi purpose grabs, rock grabs, augers and brushes for dirt and snow removal. Innovations not missed are the unique cylinderless nox tilt rotator, the revolutionary HPXdrive – no hoses, no hydraulic cylinders, easy shell ex-change and absolutely maintenance-free – or the C-VE series with its fast shell exchange system!
Landscaping / Snow Removal Road Construction Civil Engineering Utilities
Primary Demolition Secondary Demolition Steel
No matter if demolishing, breaking, pulverizing or separating – with attachments for demolition and recycling you will always have the perfect tool.With attachments for a broad scope of machines, reaching from demolition grabs for lighter weight excavators up to dedicated shears for excavators of up to 80t operating weight – the perfect solution for each weight and task is available.Innovations do not fall short: the MQP with its strong power thanks to the - cylinder, or the , making the exchange of jaws possible within only a few minutes on site!
Many Applications - One Solution: kinshofer Over 40 years of experience as well as involvement with en d users in the development process, combined with the latest engineering tools, have led to KINSHOFER‘s comprehensive product range.
It makes no difference whether you are loading or discharging boat or train carriages, handling scrap or wood or performing demolition tasks – within the KINSHOFER range »Material Handling« you are sure to find the optimal tool. Excavators from 11t to 80t operating weight can be equipped. Orange peel grabs with different capacities and designs are part of the available tools as well as demolition and sorting grabs, re-handling clamshell buckets or timber grabs. Outstanding: the extraordinary C80H re-hand-ling clamshell bucket with the incredible volume of 5000 litres!
Waste Bulk Material & Dry Cargo Timber
Construction Off-Shore Nuclear Pipeline / Geothermal
As the tasks to be accomplished are becoming more and more complex, the requirements to be met increase accordingly. Many times, no standard tool can meet to solve clients‘ demands and thus, only a custom-made product can solve the problem. Our existing products for custom and special solutions range from tools for off-shore operations, nuclear tasks to geothermal appli-cations. You have a certain problem on hand requiring a special solution? KINSHOFER will find the perfect answer for you and your task!
There is hardly another invention that has changed the transport system as much as the railway. Railroads have, and continue, to play a large role in the way people and products are transported around the world. It is vital that railways are kept operational and safe.No matter if it is about the construction, maintenance or demolition of railroad tracks: the KINSHOFER range meets every demand, ranging from sleeper layers and ballast tampers to large mobile rail cutters. Find everything you need and more in one single company!
Rail Track Maintenance Scrap Rails
RAILWAY ... . . . application includes the construction of railway tracks,
their maintenance, demolition, and ultimately scrapping. No matter what task, Kinshofer has the solution!
The railway is one of the most important transport systems in the world and thus railtracks run through almost every country on earth. As this extended system depends on its availability and reliability, it has to be constructed and maintained in a fast and accurate way. From the excavation works needed for the right positioning of tracks or cable pits, the compaction of the ballast, the handling and positioning of sleepers, ballast and rail tracks, to the maintenance of the constructed railtrack system, and finally up to the demolition and ultimate scrapping: Kinshofer has every tool for your Road Rail Excavator or Loader Crane.
The RC 26 R HDMobile Rail Cutter breaks rails without problem
For the optimal compaction of the ballast, there is only one choice:
the RST Ballast Tamper
The Sleeper Changing Unit RBS removes and places sleepers in existing railtracks
GRL Cable Lid Grapple for efficient lid handling
With the C-VE Clamshell Bucket,
the ballast can be removed
from in between the sleepers
The RUS Sleeper Layer handles several sleepers at once and fits different sizes
For levelling and distributing ballast: the SKB-Ballast Sweeper Roller
The KM 930 Manipulator can be mounted to cranes as well as to excavators
With the Lid Opener LOP, cables and hoses can be positioned in already existing cable pits
7
Contents
Cata
log
effec
tive
July
201
2
—> Further information about KINSHOFER products can be found on our web site www.kinshofer.com
Summary Listed by Operating Weight of Excavator
NOX Tilt Rotators
Tilt Rotator for excavators with 3 t/6600 lbs up to 25 t/55000 lbs operating weight: TR06NOX / TR10NOX / TR18NOX / TR25NOX 9
Railroad Grapple
Railroad Grapple for Loader Cranes: KM 632Rc 10
Railroad Grapple
Railroad Grapple for Loader Cranes: KM 632-2-R 11
Sleeper Changing Unit
Sleeper Changing Unit for Excavators 10 t/22000 lbs up to 24 t/52800 lbs operating weight: RBS 12
Sleeper Layer
Sleeper Layer for Excavators with 12 t/26400 lbs to 24 t/52800 lbs operating weight: RUS 13
Sleeper Grapple
Sleeper Grapple for Excavators up to 20 t/44000 lbs operating weight: KSG 05 / KSG 10 / KSG 15 14
Ballast Tamper
Ballast Tamper for Excavators up to 24 t/52800 lbs operating weight: RST 02 / RST 03 / RST 04 15Double Ballast Tamper for Excavators up to 24 t/52800 lbs operating weight: RST 0202 / RST 0303 16
Ballast Brush
Ballast Sweeper Roller for all Loaders and Excavators with operating weight >1 t/2200 lbs: SKB-Ballast 17
Sweeper Roller & Rotor Brush
Sweeper Roller for all Loaders and Excavators with operating weight >1 t/2200 lbs: SKB 10 / SKB 15 / SKB 26 / SKB 30 18Rotor Brush for Excavators up to 20 t/44000 lbs operating weight: ROB 20 18
Bucket Sweeper
Bucket Sweeper for Excavators with 5 t/11000 lbs up to 24 t/52800 lbs operating weight: SKS 0904 / SKS 1104 / SKS 1106 / SKS 1225 / (available for Loaders too) SKS 1375 / SKS 1685 / SKS 1856 / SKS 2356 / SKS 2506 19Ballast Bucket Sweeper for Excavators up to 24 t/52800 lbs operating weight: SKS-Ballast 19
Levelling Plough
Levelling Plough for all Excavators with operating weight >1 t/2200 lbs: AVP 20
Lid Opener
Cable Trench Lid Opener for Excavators from 4 t/8800 lbs up to 24 t/52800 lbs operating weight: LOP 21
Lid Grapple
Cable Trench Lid Grapple for Excavators from 4 t/8800 lbs up to 24 t/52800 lbs operating weight: GRL 22
Cable Cutter
Cable Cutter for Excavators up to 24 t/52800 lbs operating weight: KST 11 23
KINSHOFER Grapples with Shell Exchange System C-VE
Clamshell Buckets for Excavators up to 12 t/26400 lbs operating weight: C12VE 24Exchangeable Shells & Grippers for C12VE 25
Clamshell Buckets for Excavators up to 18 t/39600 lbs operating weight: C18VE 26Exchangeable Shells & Grippers for C18VE 27
Exchangeable Shell System C-VE 28
Mobile Rail Cutting Shear
Mobile Rail Cutting Shear for Excavators up to 26 t/57200 lbs operating weight: RC 26 R HD 29
Tree and Metal Cutter
Tree and Metal Cutter for Excavators up to 30 t/66000 lbs operating weight: TKL 22 / TKL 30 / MKL 22 30
Thicket Cutter Bar
Thicket Cutter Bar for Excavators up to 18 t/39600 lbs operating weight: HXX 150 / HXX 225 31
3-Axes-Manipulator3-Axes-Manipulator for Loader Cranes / Static Cranes: KM 931 32
Brush Cutter
Brush Cutter for Excavators from 6 t/13200 lbs up to 25 t/55000 lbs operating weight or Loader Cranes: SLA 2 / SLA 4 / SLA 6 / SLA 12 / SLA 14 / SLA 20 33Manipulator
Manipulator for Loader Cranes: KM 930 34
Fork SetFork Set for Excavators up to 24 t/52800 lbs operating weight: GAF 6 / GAF 8 / GAF 12 / GAF 18 / GAF 20 / GAF 24 35
Augers and Drives
Drive Units for Excavators with 3 t/6600 lbs to 10 t/22000 lbs operating weight: AS03 / AS05 / AS08 / AS10 36Augers: BS-100 to BS-800 for Standard and Heavy Duty 37
Drive Units and Augers for Excavators: BAD / HYK / BOR 38
Road-Rail WagonRoad-Rail Wagon: JVV 39
8
Summary Listed by Operating Weight of Excavator
Type Operating Weight of Excavator (t)
NOX Tilt Rotator1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30
TR06NOXTR10NOXTR18NOXTR25NOX
Sleeper Changing Unit1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30
RBS
Sleeper Layer1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30
RUS 03RUS 04RUS 06
Sleeper Grapple1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30
KSG 05KSG 10KSG 15
Ballast Tamper / Double Ballast Tamper1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30
RST 02RST 03RST 04 RST 0202RST 0303
Bucket Sweeper1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30
SKS 0904/1104SKS 1106SKS 1225SKS 1375SKS 1685SKS 1856/2356SKS 2506
Lid Opener1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30
LOP 02LOP 05
Lid Grapple1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30
GRL
Clamshell Buckets with Exchangeable Shells 1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30
C12VEC18VE
Mobile Rail Cutter1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30
RC 26 R HD
Augers with Drive Unit1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30
AS03AS05AS08AS10
Thicket Cutter Bar1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30
HXX 150HXX 225
Tree and Metal Cutter1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30
TKL 22TKL 30MKL 22
Fork Set1 2 3 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 25 30
GAF 06GAF 08GAF 12GAF 18GAF 20GAF 24Bohrschnecken Legend:
vertical cylinder (V = vertical, type E = with exchangeable shells)
others
9We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
TR06NOX / TR10NOX / TR18NOX / TR25NOX Tilt RotatorsExperience and innovation have led to one of the most advanced tools for excavators – the NOX Tilt Rotator: continuous 360° rotation and a tilting angle of 2 x 45° to 2 x 55° make it a universal joint. Combined with quick change system and various attachments this means highest efficiency at any construction site. The NOX Tilt Rotator range is optimally engineered to suit excavators with an operating weight of 3t/6600 lbs to 25t/55000 lbs.Advantages:l Precision and safety due to ”smooth“ proportional control (optional).l High stability and long service life thanks to special cast housing.l Low overall height thanks to elliptic rotary actuator: large travel.l High and constant tilt force due to cylinderless rotary actuator.l No protruding parts: excavation with narrow bucket in small, deep canals, even under or in between existing tubes.l Low maintenance: worm drive runs in permanent greasing.
Tota
l hei
ght d
epen
ding
on
mou
nted
ada
pter
s
10 t … 15 t … 20 t … 25 t … 32 t … 40 t … 50 t…5 t…3 t
Tilt Rotator TR06NOX / TR10NOX / TR18NOX / TR25NOX with 360° rotationType Excavator Self Width Length Height max. max. Tilting Tilting Rotating Rotations Rotary
operating 1) A2) B2) C2) Volume Width angle torque3) torque4) / min feed-weight (approx. bucket bucket through (t/lbs) lbs) (in) (in) (in) (cu.ft) (in) (°) (ft.lbs) (ft.lbs) (RPM) (GPM)
TR06NOX >3-6/6600-13200 264 14.15 19.70 14.55 8.35 1200 2 x 50 6270 constant 5531 9,05) 10.57
TR10NOX >5-10/11000-22000 484 16.20 24.00 17.50 16.65 1600 2 x 55 8850 constant 5531 7,55) 10.57 [18.507]
TR18NOX >9-18/19800-39600 1012 17.70 29.15 20.85 33.35 2000 2 x 50 18440 constant 6195 7,06) 31.70
TR25NOX >15-25/33000-55000 1364 21.00 30.05 23.50 43.35 2200 2 x 45 25815 constant 7670 5,76) 31.701) Total weight incl. upper bracket, excl. quick coupler 2) Reference: TR06NOX S40/S40, TR10NOX S50/S50, TR18NOX S60/S60, TR25NOX S70/S70 3) at 3600 psi 4) at 3240 psi and vertical axis 5) CSP & CSS at 7.93 GPM 6) CSP & CSS at 10.57 GPM 7) for DF8 and DF10 control system
Standard package consists of: Tilt Rotator, electric control system, upper suspension or coupling, lower coupler or quick change
ControlType DescriptionCSS 8) all functions are controlled by on/off solenoid valves and can be run simultaneouslyCSP 9) tilt and rotation are controlled by proportional solenoid valves and can be run simultaneously,
extra function and quick coupler are controlled by on/off valvesDF4 8) for each function (rotate & tilt) separate double acting hydraulic circuit on excavator dipper (not upgradable)DF8 8) for each function (rotate, tilt, quick change, Extra 1) separate double acting hydraulic circuit on excavator dipperDF10 8) for each function (rotate, tilt, quick change, Extra 1, Extra 2) separate double acting hydraulic circuit on excavator dipper8) original excavator control remains 9) installation of KINSHOFER comfort control
Control System CSS consists of: controlbox, wiring from existing control sticks to Tilt RotatorControl System CSP consists of: controlbox, 2 joystick grips SVAB L8, wiring from joysticks to Tilt Rotator, proportional pressure control valve
AccessoriesGripper Description Self Dimensions max. Opening Closing Closing Load
weight D x E x F10) width G time11) force capacityType hydraulic Gripper Module, rigidly (approx. lbs) (in) (in) (sec) (lbf) (lbs)TRG06 S40 mounted to the NOX, can be 88 18.5 x 20.3 x 5.5 16.35 1.5 1650 660TRG10 S45/50 used to pose masts, tubes etc. 176 23.6 x 26.6 x 8.1 24.00 1.3 2200 1100TRG18 S60 without the necessity of 249 27.6 x 28.2 x 10.4 28.05 1.7 3960 1980
changing an attachment 10) see techn. drawing 11) at 6.61 GPM
Requirements of ExcavatorHydraulic system: Minimum of one single acting hydraulic circuit (hammer valve with free return line to tank)
Double acting hydraulic circuit equally possible for DF8 and DF10 models (not CSP/CSS)Operating pressure: 3600 psi; max. backflow pressure 72 psiElectrics (for CSS and CSP): Electric supply 12V or 24 V
Technical Drawings
quick coupler
lower quick hitchcontinuous rotation (360°) tilt a
ngle GripperTRG06
Tilt Rotator TR25 S70 S70
C
B AG
E
D
F
10We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
Railroad Grapple KM 632Rc
Railroad Grapple KM 632Rc
Type Capacity Width max. Opening A Height B Height C Self weight Load capacity Closing force(closed incl.
rotatator)(open incl. rotatator)
(cord / sq ft) (in) (in) (in) (in) (lbs) (lbs) (lbf )KM 632R-0.25 c 1/4 / 3 3/4 23 69 42 54 970 6600 4950KM 632R-0.33 c 1/3 / 5 1/2 23 78 47 59 1025 6600 4270KM 632R-0.50 c 1/2 / 8 23 96 50 67 1315 6600 3370
Package consists of: railroad grapple, KINSHOFER rotator KM 04 F140-30US, short connecting hoses (between rotator and grab), upper suspension KM 501 4500, removable synchronizing gears, non-return valve
Accessories
Type Description
KM 505 HD Quick Change System Set for KINSHOFER Shaft Rotators, incl. hydraulic couplingsKM 685 06 eye / hook set 2 welded eyes / welded hooks (2 pieces)
Requirements of Truck Crane
Operating pressure: 3770 psiPump capacity: 6.5 to 20.0 GPM
Technical Drawings
Designed to handle the various demands of the rail, the KM 632Rc can be used for rail, bundled or individual ties. This robust and versatile tool is for use on loader cranes.
l The railroad grapple is ideal for handling railroad ties and rails and for clearing brush.l Long service life is ensured by the sturdy construction and high quality components.l Reduced wear resulting from generously dimensioned bearing system.l Tine tips are vertical when the grapple is fully opened, allowing easy loading and unloading of bundled ties - directly from gondola cars.l Exchangeable gears are standard and ensure synchronized movement of tines.l Each arm is equipped with a heavy duty hydraulic cylinder, providing an
extremely high clamping force.l The gear-type continuous rotator allows precise positioning of the grapple.l Guaranteed safety in case of pressure drop due to non-return valve.
11We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
600D
85
920
1600
Railroad GrappleKM 632-2-R
Railroad Grapple KM 632-2-R
Type Capacity Width max. Opening A Height B Height C Self weight Load capacity Closing force(closed w/o
rotator)(open w/o
rotator)(cord / sq ft) (in) (in) (in) (in) (lbs) (lbs) (lbf )
KM 632R-2-R 1/3 / 5 1/2 24 78 47 54 780 6685 3080
Package consists of: railroad grapple, KINSHOFER rotator KM 04 F140-30US, short connecting hoses (between rotator and grab), upper suspen-sion KM 501 4500, removable synchronizing gears, non-return valve
Accessories
Type Description
KM 505 HD Quick Change System Set for KINSHOFER Shaft Rotators, incl. hydraulic couplingsKM 685 05 adapters for & with compression rails KM 685 06 eye / hook set 2 welded eyes / welded hooks (2 pieces)KM 685 central eye welded eye (1 piece)
Requirements of Truck Crane
Operating pressure: 2900 psiPump capacity: 6.6 to 19.8 GPM
Technical Drawings
Designed to handle the various demands of the rail, the KM 632-2-R can be used for rail or ties. This robust and versatile tool is for use on loader cranes.
l The railroad grapple is ideal for handling railroad ties and rails and for clearing brush.l Long service life is ensured by the sturdy construction and high quality components.l Reduced wear resulting from generously dimensioned bearing system.l Tine tips are vertical when the grapple is fully opened, allowing easy loading and unloading of bundled ties - directly from gondola cars.l The tool is equipped with two horizontal hydraulic cylinders, providing an extremely high clamping force.l The gear-type continuous rotator allows precise positioning of the grapple.l Guaranteed safety in case of pressure drop due to non-return valve.
12We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
6 t3 t 8 t 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 26 t 28 t 30 t
RBSSleepers of any kind can be removed and placed with the Sleeper Changing Unit RBS. The unit suits excavators from 10 t/22000 lbs to 24 t/52800 lbs operating weight.
l Efficiency: the large shield helps clearing / preparing the track. The sleeper is grabbed by two hydraulically operated grippers and then pulled out from the ballast bed. Once the new sleeper is placed, the shield can be used to level the ballast. Rational use.
l Safety: a special holding valve provides a safe grip – even if pressure drops.
l Precision: exact positioning is enhanced by adjustable end stops.l Integrated adapter to fit to a tilt rotator or quick coupler.l Light weight made of HARDOX quality steel.l Adjustable depth allows for more flexibility.
Sleeper Changing Unit
Sleeper Changing Unit RBS
Type Gripping Weight Length Height Width Gripper elements Load Operatingrange A B C D capacity weight
(in) (lbs) (in) (in) (in) (pieces) (lbs) (t/lbs)RBS 0 - 17.3 880 106.3 39.6 53.5 2 4400 10 - 24 / 22000 - 52800
Package consists of: sleeper changing unit, welded coupling
Requirements of ExcavatorTwo hydraulic circuits neededOperating Pressure: max. 2880 psiPump capacity: 7.93 - 15.85 GPMDifferent couplings available
Technical Drawings & Pictures
13We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
6 t3 t 8 t 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 26 t 28 t 30 t
B
CD
D
A A A A
With the Sleeper Layer RUS mounted to a tilt rotator or similar, concrete sleepers can be moved easily and effectively – for road rail excavators from 12 t/26400 lbs to 24 t/52800 lbs operating weight.l Low weight.l Efficiency: several concrete sleepers are clamped together at the same
time by hydraulic grippers and then layed into the ballast bed. This saves time compared to placing sleepers individually.
l Safety: a special holding valve provides a safe grip – even if pressure drops.
l Variable gripping range: the position of the traversing arms can vary within the specified range.
l Longevity: traversing arms are made of HARDOX quality steel.l Flexibility: suitable for nearly all types of waisted sleepers.l For narrow areas close to sidetracks and foundations, as the layer grabs
the sleepers in the center.l Optional: extension for positioning sleepers beneath existing rails.
RUS
Sleeper Layer RUS
Type Gripping Weight Length Height Width Number of Load Operatingrange A B C D sleepers capacity weight
(in) (lbs) (in) (in) (in) ( max. pieces) (lbs) (t/lbs)RUS 03 5.9 – 13.0 1056 94.5 19.7 22.8 3 4400 12 - 24 / 26400 - 52800RUS 04 5.9 – 13.0 1056 ( - ) 19.7 22.8 4 ( - ) 12 - 24 / 26400 - 52800RUS 06 5.9 – 13.0 1650 ( - ) 19.7 22.8 6 ( - ) 16 - 24 / 35200 - 52800
Package consists of: sleeper layer, bolt-on coupling
Sleeper Layer
Requirements of ExcavatorTwo hydraulic cycles and electric valve needed, or four hydraulic cycles without electric valveOperating Pressure: max. 2880 psiPump capacity: 7.93 - 15.85 GPMDifferent couplings available
Technical Drawings & Pictures
14We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
6 t3 t 8 t 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 26 t 28 t 30 t
KSGThe KSG Sleeper Grapple is an efficient tool for handling and positioning sleepers. Depending on the type, the grapple is available for excavators from 3 t/6600 lbs to 14 t/30800 lbs operating weight.
l Rubber-coated surfaces: the sleeper is optimally protected against damage during handling.
l Safety: a special holding valve provides a safe grip – even if pressure drops.
l Different applications: rails, curbstones, timber, stones, etc.l Integrated adapter to fit to a tilt rotator or quick coupler.l Different couplings available.l Changeable opening for different sleepers.
Sleeper Grapple
Sleeper Grapples KSG
Type Opening Opening Weight Width Load Operatingmin. max. capacity weight(in) (in) (lbs) (in) (lbs) (t/lbs)
KSG 05 5.3 13.8 165 7.9 1760 3 - 8 / 6600 - 8800KSG 10 5.3 13.8 165/209* 7.9 2200 8 - 11 / 17600 - 24200KSG 15 5.3 13.8 253 7.9 3300 11 - 14 / 24200 - 30800* depending on coupling
Package consists of: sleeper grapple, welded coupling
Requirements of ExcavatorTwo hydraulic circuits neededOperating Pressure: max. 2880 psiPump capacity: 7.93 - 15.85 GPMDifferent couplings available
Pictures
15We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
B
C
D
A
6 t3 t 8 t 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 26 t 28 t 30 t
With the RST Ballast Tamper mounted to e.g. a tilt rotator, the embedding of sleepers is fast, most efficient and productive – suitable for road rail excavators from 3 t/6600 lbs to 24 t/52800 lbs operating weight.
l Low weight.l Complete with high frequency vibrating unit (except RST 04).l Efficiency: the powerful, but low-noise ballast tamper destabilizes the
ballast while its built-in vibrating unit is running. The four arms of the tamper are pushed into the ballast bed and compact it by vibration. By moving the arms towards and beneath the sleeper, the ballast is compacted optimally.
l Flexibility: adjustable arms and force.l High and flexible frequency.l Low noise operation.l Strong vibration rubbers for low vibration against the machine.l Adjustable tamping depth.
Ballast Tamper
Ballast Tampers RST
Type Gripping Weight Length Height Width Gripper elements Compaction Operatingrange A B C D force weight
(in) (lbs) (in) (in) (in) (pieces) (lbs) (t/lbs)RST 02 7.7 - 25.6 814 32.7 49.4 20.7 4 7700 3 - 10 / 6600 - 22000RST 03 7.7 - 25.6 946 32.7 51.6 20.7 4 16500 12 - 24 / 26400 - 52800RST 04 7.7 - 25.6 792 - - - 4 - 14 - 24 / 30800 - 52800
Package consists of: ballast tamper, vibrating unit (except RST 04), bolt-on or welded coupler
RST
Requirements of ExcavatorFour hydraulic circuits neededOperating Pressure: max. 2880 psiPump capacity: 10.6 -34.4 GPM (free line to tank required)Different couplings available
Technical Drawings & Pictures
16We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
6 t3 t 8 t 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 25 t 28 t 30 t
With the RST Double Ballast Tamper mounted to e.g. a tilt rotator, the embedding of sleepers is fast, efficient and productive – suitable for road rail excavators from 12 t/26400 lbs to 25 t/55000 lbs operating weight.
l Low weight.l Complete with vibrating unit.l Efficiency: the powerful, but low-noise ballast tampers
destabilize the ballast while the built-in vibrating units are running. The arms of the tampers are pushed into the ballast bed and compact it by vibration. By moving the arms towards and beneath the sleeper, the ballast is compacted optimally.
l Flexibility: adjustable arms and force.
Double Ballast TamperRST 0202 / RST 0303
Requirements of Excavator
Two hydraulic circuits neededOperating Pressure: max. 2880 psiPump capacity: 10.6 - 31.7 GPMDifferent couplings available
Picture
Double Ballast Tampers RST 0202 and RST 0303
Type Gripping Weight Length Height Width Gripper Compaction Operatingrange A elements force weight
(in) (lbs) (in) (in) (in) (pieces) (kg) (t/lbs)RST 0202 2 x 7.7 - 25.6 1914 32.7 + gauge* 49.4 20.7 8 2 x 7700 12 - 18 / 26400 - 39600RST 0303 2 x 7.7 - 25.6 2420 32.7 + gauge* 51.6 20.7 8 2 x 16500 14 - 25 / 30800 - 55000
*European standard gauge: 56.5 inPackage consists of: double ballast tamper, middle track
17We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
6 t3 t 8 t 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 25 t 28 t 30 t
The SKB-Ballast Brush is the perfect tool for levelling and distributing ballast. Cleaning the track after filling it up with ballast has never been easier. Available for loaders as well.
l Wide range of widths: 11.8 in - 118.1 in available, sweep diameter is 37.4 in.
l Efficiency: can be equipped with different brushes for different applications. The same frame can be used for different rollers.
l Rubber hoses (13 in) sweep away ballast without damaging rails or sleepers.
Ballast Sweeper SKB-Ballast
Type Rubber Sweep Weight Length Height Widthlength diameter
(in) (in) (lbs) (in) (in) (in)SKB-Ballast 10 13 37.4 616 39.4 47.2 47.2SKB-Ballast 15 13 37.4 770 59.1 47.2 47.2SKB-Ballast 26 13 37.4 924 102.4 47.2 47.2SKB-Ballast 30 13 37.4 1045 118.1 47.2 47.2
Requirements of Excavator
Two hydraulic circuits neededOperating Pressure: max. 2880 psiPump capacity: 15.9 - 52.8 GPMDifferent couplings available
Pictures
Ballast Brush SKB-Ballast
18We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
SKB
ROB with plastic bristles
ROB with rubber hoses for ballast
ROB with steel bristles
2 t1 t ... 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 25 t 28 t 30 t
The SKB Sweeper Roller is the perfect tool for levelling slopes, lawns, gravelled areas, etc. Available for Loaders as well. The ROB Rotor Brush is used to clean smaller areas or to level gravel etc. – For excavators from 1 t/2200 lbs up to 20 t/44000 lbs operating weight.SKB:l Wide range of widths: 11.8 in - 118.1 in available, equipped with 13 in bristles.l Efficiency: can be equipped with different brushes for different applications. The same
frame can be used for different rollers. l Bristles level slopes, lawns, gravelled areas, etc.ROB:l Flexible: different brushes available (steel or synthetic bristles, rubber hoses) for all
jobs. Cleaning and flattening smaller areas or levelling loose materials such as gravel, ballast, ballast, etc.
l Optional rubber guard: if used in the public in narrow areas, you can use the brush with a rubber guard for additional security. Can be mounted on either side.
l Different couplings available. l Low oil consumption.
Sweeper Roller / Rotor BrushSKB / ROB
Sweeper Rollers SKB
Type Bristle Sweep Weight Length Height Widthlength diameter
(in) (in) (lbs) (in) (in) (mm)SKB 10 13 37.4 616 39.4 47.2 47.2SKB 15 13 37.4 726 59.1 47.2 47.2SKB 26 13 37.4 924 102.4 47.2 47.2SKB 30 13 37.4 1045 118.1 47.2 47.2
Rotor Brush ROB
Type Sweep Weight Lengthdiameter
(in) (lbs) (in)ROB 20 35.4 374 63Package consists of: rotor brush, welded coupling
Requirements of ExcavatorTwo hydraulic circuits needed Operating Pressure: max. 2880 psiPump capacity: SKB: 10.6 - 39.6 GPM ROB: 7.9 - 15.6 GPMDifferent couplings available
Pictures
ROB
SKB Sweeper Roller – for Excavators
and Loaders
19We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
6 t3 t 8 t 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 26 t 28 t 30 t
Bucket Sweeper SKS
SKS-Ballast
The SKS Bucket Sweepers are the perfect tools for flattening and carrying surplus materials from slopes, lawns, gravelled surfaces, etc. Equipped with a ballast sweeper, ballast areas and routes can easily be flattened and cleaned up. Shovel and broom function: Surplus materials like asphalt pieces or waste like trunk chips can be taken away by means of the integrated bucket. Also available for loaders. l Different widths available: 35.4 in - 98.4 in, furnished with bristles
15.8 in - 26.6 in.l Other sizes and models available.l Efficient: can be furnished with different bristles for different jobs. For
example with rubber pipes or optionally with additional lateral rotor brush.
l Integrated bucket: picks up surplus material and waste.l Flexible: not only available for loaders, but as a combination for loaders
and excavators too. Also available with rubber hoses for ballast.
Bucket Sweeper SKS
Type Bristle Weight Width Operatinglength weight
(in) (lbs) (in) (max. t/lbs)SKS 0904 15.8 330 35.4 <6 / 13200SKS 1104 15.8 360 43.3 <6 / 13200SKS 1106 26.6 550 43.3 <12 / 26400SKS 1225 19.7 605 47.2 <14 / 30800SKS 1375 19.7 660 54.1 <16 / 35200SKS 1685 19.7 726 66.1 <18 / 39600SKS 1856 26.6 1100 72.8 <22 / 48400SKS 2356 26.6 1430 92.5 <22 / 48400SKS 2506 26.6 1672 98.4 <24 / 52800
Requirements of ExcavatorTwo hydraulic circuits neededOperating Pressure: max. 2880 psiPump capacity: 15.9 - 52.8 GPMDifferent couplings available
Pictures
20We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
6 t3 t 8 t 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 26 t 28 t 30 t
The AVP Levelling Plough is the ideal tool to collect or spread ballast and gravel – for excavators from 8 t / 17600 lbs up to 20 t/44000 lbs operating weight.
l Easy to use: fill up the V to make a slope or pull up ballast along the track.
l For different loose materials such as gravel, ballast, etc. l Available with or without rubber blades.l Different couplings available.l Robust construction without protruding parts.
Levelling Plough AVP
Type Weight Length Height Width Coupling Operating(w/o coupling) weight
(lbs) (in) (in) (in) (t/lbs)AVP 374 47.2 31.5 31.5 S45 / S50 / S60 8 - 20 / 17600 - 44000
Package consists of: levelling plough, welded coupling
Pictures
Levelling PloughAVP
21We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
6 t4 t 8 t 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 26 t 28 t 30 t
The LOP Lid Opener is the ideal tool to position cables or hoses in an already existing cable trench – suitable for excavators from 4 t/8800 lbs to 24 t/52800 lbs operating weight.
l Low weight.l Efficiency: opens and closes in one single movement.l Flexibility: adjustable for different cable trenches.l Easy handling.
Lid Opener
Lid Opener LOP
Type Weight Length Height Width Trench lid Trench wall Lid Operatingmax. width thickness thickness weight
(lbs) (in) (in) (in) (in) (in) (max. in) (t/lbs)LOP 02 517 111.2 29.3 24.8 14 - 21.1 1.97 - 2.76 2.56 4 - 24 / 8800 - 52800LOP 05 462 111.2 29.3 24.8 14 - 21.1 1.97 - 2.76 2.56 4 - 24 / 8800 - 52800
Package consists of: lid opener
Pictures
LOP
22We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
5 t4 t ... 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 25 t 28 t 30 t
The GRL Cable Lid Grapple lifts all or just parts of pallet-stacked cable/trench lids – for excavators with 4 t/8800 lbs to 24 t/52800 lbs operating weight.
l Low self weight. l Ideal for laying new or old lids. l Handling and positioning of lids in existing cable trenches. l A special holding valve provides a safe grip – even if pressure drops.l Compression rails hold lids firmly without damaging them.
Cable Lid Grapple GRL
Type max. Load Weight Trench lid Width Operatingcapacity width weight
(lbs) (lbs) (in) (in) (t/lbs)GRL 1760 165 29.5 - 31.5 12.6 4 - 24 / 8800 - 52800
Package consists of: lid grapple
Requirements of ExcavatorTwo hydraulic circuits neededOperating Pressure: max. 2880 psiPump capacity: 7.9 - 15.6 GPMDifferent couplings available
Pictures
Cable Lid GrappleGRL
23We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
With the Cable Cutter KST 11 you can cut cables with an excavator. Careful operation is first priority. For excavators with 1 t/2200 lbs to 24 t/52800 lbs operating weight. l Ideal for easy cutting of cables.l Professional clean cuts.l Robust construction for a long service life.
Cable Cutter KST 11
Type Height Width Weight max. Cablethickness
(in) (in) (lbs) (in)KST 11 12.6 39.4 77 0.16 x 9.45 / 2.36
Package consists of: cable cutter
Picture
2 t1 t ... 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 25 t 28 t 30 t
Cable Cutter KST 11
24We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
C12VEClamshell Bucket with exchangeable shells and vertical cylinders for excavators from 9t/19800 lbs to 12t/26400 lbs operating weight – through quick and easy exchange of shells, the C12VE is ideal for different applications, for excavation operations, landscaping, trench digging, handling of logs and more. The shells can be changed in less than four minutes.
l Economic solution as only the shells have to be exchanged to switch applications – bucket carrier, hydraulics and bearings are integrated into the main carrier.
l Long life is ensured due to the use of 500 HB steel in the manufacture of cutting edges.
l Reduced wear resulting from generously dimensioned bearing system. l Excellent digging characteristics are the result of high closing forces
(8580 lbf at an operating pressure of 4608 psi).
Clamshell Bucket C12VEType Width B Volume Number of Self weight Load capacity
(in) (c.y.) teeth (lbs) (lbs)C12VE-32 12.80 0.16 3 1045 9900C12VE-40 15.75 0.21 3 1067 9900C12VE-50 19.70 0.26 5 1100 9900C12VE-60 23.60 0.32 5 1133 9900C12VE-70 27.55 0.37 7 1155 9900C12VE-80 31.50 0.43 9 1177 9900Package consists of: clamshell bucket, bolt-on teeth, KINSHOFER rotator, non-return valve and hose guard, 2 welded eyes
KINSHOFER RotatorContinuous rotation and two oil passages. Overload protection is ensured by pressure relief valves.
Type Upper connection Torque Moment of deflection(width x pin-Ø) max.
(in) (ft.lbs) (ft.lbs)KM 10 F275-50 4.33 x 1.97 1475 10325
AccessoriesType Description
KM 501 9t-12t upper suspension without pendulum damperKM 511 9t-12t upper suspension with pendulum damperSW08 cardanic adapter for Lehnhoff grab exchange system SW/MS08 without suspension – up to 12t/26400 lbsSW10 cardanic adapter for Lehnhoff grab exchange system SW/MS10 without suspension – up to 19t/41800 lbs
adapter for quick exchange systems from other manufacturers availableKM 680 C12VE/C18VE scraper
Requirements of ExcavatorOperating pressure: max. 4608 psi Pump capacity: 10.57 - 31.70 GPM
Technical Drawings
Clamshell Bucket with Exchangeable Shells
1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t
1350 B
1645
50O 110
1570 Railroad Grab
ClamshellBucket
Rock Grab
Timber Grab
Main Carrier C12VE / C18VE
Excavating Grab1100 mm (open)
Pipe Grab
Excavating Grab800 mm (open)
343
1008
583
777
777
556
382
411
Multi Purpose Grab679
Well Shaft Grab
310
61.8
1"
Ø1.97"
30.5
9"
53.15"
30.5
9"
64.76"
39.6
9"
4.33"
12.2
0"
22.9
5"
16.1
8"
26.7
3"
15.0
4"
21.8
9"
13.5
0"
25We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
Exchangeable Shells for C12VE
Shells are interchangeable and available in all widths. Rapid exchange with shell stand and pin exchange tool.
Type Width Opening Height Volume Number of Weight Self Load Closingrange overall teeth of shells weight capacity force
(in) (in) (in) (c.y.) (lbs) (lbs) (lbs) (lbf )Clamshell Bucket
C12VE-32S 12.80 60.45 61.80 0.16 3 286 1056 9900 8580C12VE-40S 15.75 60.45 61.80 0.21 3 308 1089 9900 8580C12VE-50S 19.70 60.45 61.80 0.26 5 363 1133 9900 8580C12VE-60S 23.60 60.45 61.80 0.32 5 396 1166 9900 8580C12VE-70S 27.55 60.45 61.80 0.37 7 451 1221 9900 8580C12VE-80S 31.50 60.45 61.80 0.43 9 495 1265 9900 8580
Excavating Grab
C12VE-32S EG 12.80 47.25 53.15 0.12 3 242 990 9900 11440C12VE-40S EG 15.75 43.30 53.35 0.07 3 275 1045 9900 12100C12VE-80S EG 31.50 31.50 53.15 0.13 9 341 1111 9900 13860
Pipe Grab
C12VE-80S PG 31.50 Ø2.9-Ø21.8 62.60 Ø 22.05 in 319 1067 9900 8580
Well Shaft Grab
C12VE-100S WSG Ø 39.40 39.40 51.95 0.13 5 308 1056 9900 13200Note: Larger shells available on request
Multi Purpose Grab
A12VE-94S 37.00 72.85 66.75 0.52 451 1210 9900 8580A12VE-122S 48.05 72.85 66.75 0.78 528 1309 9900 8580
Rock Grab
R12VE-48S 18.90 72.85 70.45 0.33 cords 440 1221 9900 6600
Timber Grab
T12VE-47S 18.50 72.25 70.65 0.33 cords 396 1177 9900 6600
Railroad Grab
C12VE-50S RG 19.70 53.15 55.30 - 297 1067 9900 9680
Package consists of: exchangeable buckets, shell stand and pin exchange tool
Please note: special buckets are availabe on request
C12VE
1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t
Exchangeable Shells
26We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
12 t 13 t 14 t 15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t 23 t 24 t 25 t 26 t 27 t
B
12560O
100
1525
1595
136015351650
67
1040
1165
C18VEClamshell Bucket with exchangeable shells and vertical cylinders for excavators up to 18t/39600 lbs operating weight – through quick and easy exchange of shells, the C18VE is ideal for different applications, for excavation operations, landscaping, trench digging, handling of logs etc. The shells can be changed in less than four minutes.
l An economic solution as only the shells have to be exchanged to suit application – bucket carrier, hydraulics and bearings are integrated into the main carrier.
l Long life is ensured due to the use of 500 HB steel in the manufacture of cutting edges.
l Reduced wear resulting from generously dimensioned bearing system with special coating.
l Excellent digging characteristics are the result of high closing forces (9240 lbf at an operating pressure of 5040 psi).
Clamshell Bucket with Exchangeable Shells
Clamshell Bucket C18VEType Width B Volume Number of Self weight Load capacity
(in) (c.y.) teeth (lbs) (lbs)C18VE-33 13.20 0.16 3 1298 9900C18VE-40 15.75 0.21 3 1331 9900C18VE-50 19.70 0.26 5 1386 9900C18VE-60 23.60 0.32 5 1441 9900C18VE-80 31.50 0.43 9 1551 9900C18VE-100 39.40 0.54 9 1661 9900
Package consists of: clamshell bucket, bolt-on teeth, KINSHOFER rotator, non-return valve and hose guard, 2 welded eyes
KINSHOFER RotatorContinuous rotation and two oil passages. Overload protection is ensured by pressure relief valves.
Type Upper connection Torque Moment of deflection(width x pin-Ø) max.
(in) (ft.lbs) (ft.lbs)KM 10 F275-60 4.92 x 2.36 1106 10325
Accessories
Type Description
KM 501 13t-25t upper suspension without pendulum damperKM 511 13t-25t upper suspension with pendulum damperSW10 cardanic adapter for Lehnhoff grab exchange system SW/MS10 without suspension – up to 19t/41800 lbsSW21 cardanic adapter for Lehnhoff grab exchange system SW/MS21 without suspension – up to 28t/61600 lbs
adapter for quick exchange systems from other manufacturers availableKM 680 C12VE/C18VE scraper
Requirements of ExcavatorOperating pressure: max. 5040 psiPump capacity: 19.82 - 39.63 GPM
Technical Drawings
Railroad Grab
ClamshellBucket
Rock Grab
Timber Grab
Main Carrier C12VE / C18VE
Excavating Grab1100 mm (open)
Pipe Grab
Excavating Grab800 mm (open)
343
1008
583
777
777
556
382
411
Multi Purpose Grab679
Well Shaft Grab
310
30.5
9"
30.5
9"
39.6
9"
12.2
0"
22.9
5"
16.1
8"
26.7
3"
15.0
4"
21.8
9"
13.5
0"
40.9
4"
Ø2.36"
53.54"
4.92"
45.8
7"
62.8
0"
60.0
4"
2.6
4"
3.9
4"
60.43"64.96"
27We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
12 t 13 t 14 t 15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t 23 t 24 t 25 t 26 t 27 t
C18VEExchangeable Shells Exchangeable Shells for C18VE
Shells are interchangeable and available in all widths. Rapid exchange with exchanging support and extraction tool.
Type Width Opening Height Volume Number of Weight Self Load Closingrange overall teeth of shells weight capacity force
(in) (in) (in) (c.y.) (lbs) (lbs) (lbs) (lbf )Clamshell Bucket
C18VE-33S 13.20 60.45 62.80 0.16 3 352 1199 9900 9240C18VE-40S 15.75 60.45 62.80 0.21 3 396 1243 9900 9240C18VE-50S 19.70 60.45 62.80 0.26 5 429 1276 9900 9240C18VE-60S 23.60 60.45 62.80 0.32 5 495 1342 9900 9240C18VE-80S 31.50 60.45 62.80 0.43 9 605 1452 9900 9240C18VE-100S 39.40 60.45 62.80 0.54 9 715 1562 9900 9240
Excavating Grab
C18VE-33S EG 13.20 47.45 56.30 0.12 3 275 1122 9900 12540C18VE-40S EG 15.75 44.10 66.35 0.07 3 286 1133 9900 13200C18VE-80S EG 31.50 32.30 54.35 0.13 9 407 1254 9900 15180
Pipe Grab
C18VE-83S PG 32.70 Ø3.95 - Ø 23.60 64.00 Ø 23.60 in 649* 1496* 9900 9020* : incl. support
Well Shaft Grab
C18VE-97S WSG Ø 38.20 38.20 55.50 0.14 5 374 1221 9900 14300Please note: larger shells are available on request
Multi Purpose Grab
A18VE-95S 37.60 72.05 66.35 0.52 748 1595 9900 9020A18VE-122S 48.05 72.25 67.90 0.78 605 1452 9900 7040
Rock Grab
R18VE-49S 19.30 72.85 71.65 0.33 cords 429 1276 9900 7260
Timber Grab
T18VE-49S-0,5 19.30 72.05 71.85 0.33 cords 440 1287 9900 6600T18VE-49S-0,6 19.30 77.75 75.00 0.40 cords 484 1331 9900 7260
Railroad Grab
C18VE-50S RG 19.70 49.20 55.10 - 286 1133 9900 9680
Package consists of: exchangeable buckets, shell stand and pin exchange tool
Please note: special buckets are availabe on request
28
Robust grabs for excavators with revolutionary exchange system in a single device. As a new demand on site arises, the attachment can be exchanged and the new application can commence. Easy remounting of shells for excavating, landscaping, laying pipes, logging, rail track handling etc.
l Efficiency: only the shells are replaced; exchange is possible with only one person.l Fastness: easy exchange of the lynch pin from the change-over system
within 4 minutes, no hydraulic work necessary.l Robust technics: compact design through the integrated rotator. Robust shell
bearing with coexisting change mechanism.
Clamshell buckets with exchangeable shells are available for:l excavators up to 8t/17600 lbs: C08VE/ T08VE/ R08VE and other exchangeable shellsl excavators up to 12t/26400 lbs: C12VE/ T12VE/ R12VE and other exchangeable shellsl excavators up to 18t/39600 lbs: C18VE/ T18VE/ R18VE and other exchangeable shellsl excavators up to 25t/55000 lbs: C25VE and other exchangeable shells
Clos
e bu
cket
and
set
it d
own.
M
ount
the
exch
ange
su
ppor
t.
Start
Rem
ove
the
lync
h pi
n fr
om
the
chan
ge-o
ver s
yste
m0.58min.
Rem
ove
the
chan
ge-o
ver p
in
with
ext
ract
ion
tool
.
1.67min.
Posit
ion
the
buck
et c
arrie
r ove
r th
e ne
w a
ttac
hmen
t and
clo
se
the
lock
ing
unit
hydr
aulic
ally
.
2.50min.
Inse
rt th
e ch
ange
-ove
r pin
and
fa
sten
the
lync
h pi
n.3.75min.
Rem
ove
the
exch
ange
su
ppor
t. Re
ady
for u
se!4 min.
finished!
Kinshofer Exchangeable Shell System C-VE
Rock Grab
Pipe Grab
Timber Grab
Clamshell Bucket
Multi Purpose Grab
Well Shaft Grab
Operating Module
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany
29We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
RC 26 R HD
15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t … 25 t … 27 t … 35 t 40 t 50 t … 65 t8 t 10 t 12 t 14 t 16 t 18 t … 20 t 21 t … 26 t 27 t … 30 t … 40 t … 50 t
Mobile Rail CutterThe Kinshofer Mobile Rail Cutter RC 26 R HD is a special development for the controlled demolition of rail systems and for the scrap preparation of railway lines. All current Vignol rails (flat bottom rails) with a standard quality up to 130535 lbf/in² and a profile size ”S7“ to ”UIC 60“ can be cut. Vignol rails in special qualities exceeding 130535 lbf/in² or with head hardening are excluded. The wear of the cutters highly depends on the quality of the rails. The mobile rail cutter RC 26 R HD is ideal for excavators with an operating weight of 21t/46200 lbs to 30t/66000 lbs.
Special version for the US market: Mobile Rail Cutter RC 26 R HD A.
l Inverted hydraulic cylinder for increased rod protection.l Large, heavy duty bearings for reduced bushing wear.l Housing made of extremely resistant special steel.l Heavy duty 180° rotation.
RC 26 R HD Mobile Rail CutterType Service weight Length Jaw opening Jaw depth Operating
(w/o adapter) A B C weight*(lbs) (in) (in) (in) (t/lbs)
RC 26 R HD 6600 100.40 8.10 8.10 21 - 30 / 46200 - 66000* decisive for the mounting of the shear is the payload of the excavator
Requirements of Excavator
RC 26 R HD back pressureOperating pressure: hydr. cylinder: max. 3600 psi 72 psi
rotation: max. 2880 psiPump capacity: max. 66.05 GPM (hydraulic cylinder), 4.76 - 6.61 GPM (rotation)
Technical Drawings
RC 26 R HD (European version)
30We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
13 t12 t 14 t 15 t ... 20 t 21 t 22 t 23 t 24 t 25 t ... 30 t 31 t
TKL / MKL Tree Cutter / Metal CutterThe Tree Cutter cuts slim trees and branches most effectively. The same applies to the Metal Cutter with metal cable channels.For excavators with 4 t/8800 lbs to 24 t/52800 lbs operating weight (or for Loader Cranes with a suitable hydraulic system). l Flexible.l TKL-HUM: cuts trees up to 5.5 in.l TKL: cuts trees up to 9.8 in or 13.8 respectively.l TKL-HUM: with rubber suspension. l MKL: cuts metal cable channels or U-Beams up to 7.9 in
and trees up to 13.8 in. l Gripper available as option for excavators.l Low oil consumption.
Tree and Metal Cutter
Type Height Width Weight Cutting max. Tree max. Metal Operatingwidth diameter 0 thickness weight
(in) (in) (lbs) (in) (in) (in) (t/lbs)TKL HUM Crane 19.7 15.8 132 51.2 5.5 - -TKL HUM 22 31.5 19.7 286 88.6 5.5 - -TKL 22 33.5 31.5 462 51.2 9.8 - 12 - 18 / 26400 - 39600TKL 30 33.5 31.5 660 88.6 13.8 - 18 - 30 / 39600 - 66000MKL 30 19.7 27.6 1430 88.6 13.8 7.9 16 - 30 / 35200 - 66000
AccessoriesType Dimensions Self max. Opening Load
height x depth weight width capacity (in) (lbs) (in) (lbs)
Gripper 20.5 x 16.7 275 47.2 6600
Requirements of Excavator
Operating Pressure: TKL: 3170 psi / MKL: 4320 psiPump capacity: 15.9 GPMDifferent couplings available
Pictures
Tree Cutter TKL 22
(with integrated
gripper)
Tree Cutter TKL 30 (with gripper mounted to a tilt rotator)
Tree Cutter TKL HUM
31We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
6 t3 t 8 t 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 25 t 28 t 30 t
HXXThicket Cutter BarThe Thicket Cutter Bar cuts easily high grass, bushes, thicket, protruding or overhanging smaller branches – or the usual mix of all together at embankments or uncultivated areas. For excavators with 3 t/6600 lbs to 18 t/39600 lbs operating weight. l Ideal for cutting thicket and branches.l Professional clean cutting.l Very strong and efficient.l Heavy construction for longevity.l Low risk, safe operation.
Thicket Cutter Bar
Type Height Width Weight Cutting max. Branch Operatingwidth thickness weight
(in) (in) (lbs) (in) (in) (t/lbs)HXX 150 19.7 53.2 253 51.2 1.18 3 - 6 / 6600 - 13200HXX 225 31.5 90.6 484 88.6 3.54 7 - 18 / 15400 - 39600
Requirements of Excavator
Two hydraulic circuits needed
Operating Pressure: max. 2880 psiPump capacity: 11.9 GPM (HXX 150), 15.9 GPM (HXX 225)
Different couplings available
32We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
KM 931 3-Axes-ManipulatorThe 3-Axes-Manipulator KM 931 features maximum manoeuvrability of your attachments at the loader crane‘s tip – and provides flexibility of the loader crane‘s use in any arc position.
l 3-axes-manipulator: maneuverability by three hydraulic functions: gripping, rotating and tilting (3rd hydraulic cycle needed). Endless rotation.
l High loads of 1100 lbs up to 3300 lbs are handled by KINSHOFER-Manipulators.
l Precise positioning by the KINSHOFER rotator with – mechanically acting hydraulic break for the rotating movement (KM 931-500). – or with a self-locking worm drive (KM 931-1500).
3-Axes-Manipulator KM 931
Type max. Load Slewing Tilting Rotation Self weightangle angle
(lbs) (lbs)KM 931-500 1100 135° ± 40° 360° endless 440KM 931-1500 3300 160° ± 60° 360° endless 660
Package consists of: manipulator, KINSHOFER rotator, hydraulically unlockable break / self-locking worm drive, non-return valve
Note: tubes or poles must always be taken at / near their balance point !
Accessories
Type Description
KM 980-2 solenoid valve for additional oil circuit to change over to 3 circuits (for gripping, lifting, turning) when only 2 circuits are available, ready for mounting – 12 V or 24 V, working pressure max. 3600 psi, oil flow 15.9 GPM
KM 980-2 c solenoid valve KM 980-2 complete attachment kit including assembly components, hose guard, hoses and mounting on the KM 930 manipulator – 12 V or 24 V, working pressure max. 3600 psi, oil flow 15.9 GPM
Requirements of Excavator
Three hydraulic circuits neededOperating pressure: max. 2880 psiOil flow: 5.3 - 10.6 GPM
Technical Drawings
3-Axes-ManipulatorKM 931-1500
3-Axes-ManipulatorKM 931-500
Quick Hitch
33We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
SLA 12 mounted on a NOX Tilt Rotator to an excavator SLA 4 mounted on a trailer-mounted Loader Crane
SLABrush CutterThe Brush Cutter SLA cuts high grass, bushes, thicket, protruding or overhanging branches easily – or the usual mix of all together at embankments or uncultivated areas. It does not only cut, but also mulches by means of special knives – for excavators with 2 t/4400 lbs to 25 t/55000 lbs operating weight and for loader cranes in the railway sector. l Ideal for cutting brush and scrub, thicket and bushes.l Professional cutting and mulching by I/Y-formed movable
knive-bundles.l Strong and efficient.l Heavy construction for a long service life.
Brush Cutter
Type Width Weight Working max. Branch min. Oil Operatingwidth thickness flow weight
(in) (lbs) (in) (in) (GPM) (t/lbs)SLA 2 39.4 352 25.6 2.4 6.87 2 - 4 / 4400 - 8800SLA 4 43.3 462 31.5 3.2 9.51 3 - 5 / 6600 - 11000SLA 6 51.2 616 39.4 3.2 9.51 3 - 6 / 6600 - 13200SLA 12 63.0 1254 51.2 4.7 17.44 7 - 11 / 15400 - 24200SLA 14 74.8 1474 63.0 4.7 21.14 9 - 13 / 19800 - 28600SLA 20 82.7 1650 74.8 4.7 26.42 14 - 25 / 30800 - 55000
Requirements of Excavator
Two hydraulic circuits needed for SLA 2 / SLA 4 / SLA 6 – two hydraulic cycles and free drain line to tank for SLA 12 / SLA 14 and SLA 20 Operating Pressure: max. 3600 psiPump capacity: see table aboveDifferent couplings available
Pictures
Special knife-bundle made of three movable parts. The central knife cuts the raw pieces into fine mulch material
6 t2 t 8 t 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 25 t 28 t 30 t
34We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
ManipulatorKM 930
KM 930-500 KM 930-1000 KM 930-2000 KM 930-3000
A hydraulically operated attachment used for positioning tubes or poles, the KM 930 is for use on loader cranes with three functions. Flange mounting on the mechanical extension of the crane.
l Manoeuvrability through three hydraulic functions gripping, lifting and turning (rotation and tilting) of straight round poles (three hydraulic circuits are necessary). Unlimited angle of rotation.
l Heavy loads of 1100 lbs up to 6600 lbs can be handled by the KINSHOFER manipulators.
l Precision operation assured through continuous rotation, equipped with mechanically operating, hydraulic pilot controlled brake to prevent unintentional rotation.
Manipulator KM 930
Type Load capacity Gripping Ø Width B Number of Self weight Closing force(min./max.) tines
(lbs) (in) (in) (lbs) (lbf )KM 930-500 1100 3.9 / 11.8 30.9 1 517 2420KM 930-1000 2200 3.9 / 11.8 50.2 2 682 5060KM 930-2000 4400 9.8 / 23.6 53.7 4 1903 5500KM 930-3000 6600 9.8 / 23.6 64.2 6 2387 8580
Package consists of: manipulator, KINSHOFER rotator, hydraulic pilot controlled brake, non-return valve
Please note: tubes or poles have to be grabbed always in the centre of gravity
Accessories
Type Description
KM 980-2 solenoid valve for additional oil circuit to change over to 3 circuits (for gripping, lifting, turning) when only 2 circuits are available, ready for mounting – 12 V or 24 V, working pressure max. 3600 psi, oil flow 15.9 GPM (do-it-yourself assembly)
KM 980-2 c solenoid valve KM 980-2 complete attachment kit including assembly components, hose guard, hoses and mounting on the KM 930 manipulator – 12 V or 24 V, working pressure max. 3600 psi, oil flow 15.9 GPM
Requirements of Truck Crane
Operating pressure: max. 2880 psi Mind the pressure!Pump capacity: 5.3 - 10.6 GPM
Technical Drawings
35We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
35 t15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t … 25 t … 27 t …3 t1 t 6 t 8 t 10 t 12 t 16 t 18 t 20 t 22 t 24 t 26 t 27 t … 30 t
Fork Set GAF
Fork Set
Type max. Load Width Self weight Couplingscapacity
(lbs) (in) (lbs) (Type)GAF 6 4180 39.4 308 S30, S40GAF 8 4180 47.2 418 S45, S50GAF 12 5500 47.2 440 S45, S50GAF 18 8800 47.2 748 S45, S50, S60GAF 20 8800 47.2 924 B18, B20, B27, B70GAF 24 11000 47.2 968 B20, B27, B70, S80
Package consists of: mechanically adjustable fork, adapter for quick coupling system
Please note: put loads always the nearest to the back and to the centre of gravity
Requirements of Excavator
Quick coupling system nordic systems like S- or B-couplers (see table)
Picture
Lifting, moving and positioning of palletized or unpalletized materials is easy with the GAF Fork Set. Turn your excavator into a fork lift truck. Suitable for excavators from 3 t/6600 lbs to 27 t/59400 lbs operating weight.
l High lifting capacity. l Lightweight: S-type couplers ≤ 8% and B-types
couplers ≤ 11% of the total weight.l Highly economical: good value for money.l Adapted for being used with a tilt rotator:
best handling in this combination. l Mechanically adjustable forks.l Easy to connect by quick coupler adapter.l Wide range of quick coupling adapters:
S30 to S80 and/or B18 to B30.
GAF 18
36We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
AS Drive Units for AugersFor use on excavators, AS03 / AS05 / AS08 / AS10 auger drives are an econo-mical, robust solution for drilling holes for fence posts, poles, foundations and landscaping. Application specific wear parts and augers mean our auger packages are tailor-made to suit your needs.
l Profitable – With better speed and precision than alternative drilling methods, the AS03 / AS05 / AS08 / AS10 drive units and augers save you time, labour and filling materials.
l Adaptable – A range of drive units with different auger diameters and digging teeth means a AS03 / AS05 / AS08 / AS10 is available for all types of excavators, and suitable for a wide variety of applications.
l Durable – Designed and built to last, AS03 / AS05 / AS08 / AS10 series drive units can handle hundreds of consecutive cycles.
l Drive Units – steel housing can withstand high shock loading, output shaft and gear carrier are a robust, one-piece construction, components run in a maintenance free, constant oil bath, gears can easily be shifted from forward to reverse to quickly free the unit from being jammed.
Available for different excavator operating weights: 1t/2200 lbs - 3t/6600 lbs: AS03, 3t/6600 lbs - 5t/11000 lbs: AS05 , 5t/11000 lbs - 8t/17600 lbs: AS08, 5t/11000 lbs - 10t/22000 lbs: AS10 (AS03-AS08: torque 1440 to 4055 ft.lbs at 2880 psi, AS10: torque 5460 ft.lbs at 3456 psi).l Augers: teeth are set on a continuous spiral to provide maximum penetration and uniform performance.l Wear parts: l rubber locking system makes teeth easy to exchange. l using a hammer and punch, tooth exchange is done on-site. l two teeth options: Allround Teeth – BS-A: made of tempered material, bolt-on teeth are suitable for earth and clay. Strong Tungsten Teeth – BS-S: tungsten tipped, suitable for medium-rich soil, stony or frozen ground, heavy clay or asphalt.
Drive Units AS03 / AS05 / AS08 / AS10
Drive Unit AS03: Torque (at 20 MPa): 1440 ft.lbs
Operating pressure: 2880 psi
Pump capacity: 6.61 - 15.85 GPM
Output shaft: 2.24 in square
Self-weight: 99 lbs
Operating weight excavator: 1 - 3 t / 2200 - 6600 lbs
Upper connection (width x pin-Ø) 3.31 x 1.18 in
Drive Unit AS05: Torque (at 20 MPa): 2765 ft.lbs
Operating pressure: 2880 psi
Pump capacity: 10.57 - 19.82 GPM
Output shaft: 2.24 in square
Self-weight: 143 lbs
Operating weight excavator: 3 - 5 t / 6600 - 11000 lbs
Upper connection (width x pin-Ø) 3.31 x 1.18 in
Drive Unit AS08: Torque (at 20 MPa): 4055 ft.lbs
Operating pressure: 2880 psi
Pump capacity: 13.21 - 30.38 GPM
Output shaft: 2.24 in square
Self-weight: 176 lbs
Operating weight excavator: 5 - 8 t / 11000 - 17600 lbs
Upper connection (width x pin-Ø) 3.31 x 1.18 in
Drive Unit AS10: Torque (at 24 MPa): 5460 ft.lbs
Operating pressure: 3456 psi
Pump capacity: 18.94 - 36.99 GPM
Output shaft: 2.24 in square
Self-weight: 209 lbs
Operating weight excavator: 5 - 10 t / 11000 - 22000 lbs
Upper connection (width x pin-Ø) 3.31 x 1.18 in
1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t
37We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t
Augers BS-100 – BS-800 for Standard / Heavy DutyAugers for Drive Units AS03, AS05, AS08 and AS10
Typ
e
App
licat
ion
Dia
met
er o
f aug
er
Leng
th o
f aug
er(w
itho
ut e
xten
sion
)
Wea
rpar
tsTy
pe /
Qty
. of t
eeth
Self-
wei
ght
(in) (in) (lbs)
BS-150-57A standard duty 5.91 47.24 A / 2 62
BS-200-57A standard duty 7.87 47.24 A / 2 68
BS-225-57A standard duty 8.86 47.24 A / 2 79
BS-250-57A standard duty 9.84 47.24 A / 2 86
BS-300-57A standard duty 11.81 47.24 A / 4 101
BS-350-57A standard duty 13.78 47.24 A / 4 110
BS-400-57A standard duty 15.75 47.24 A / 6 115
BS-450-57A standard duty 17.72 47.24 A / 6 119
BS-500-57A standard duty 19.69 47.24 A / 8 159
BS-600-57A standard duty 23.62 47.24 A / 8 178
BS-800-57A standard duty 31.50 47.24 A / 9 271
BS-100-57S heavy duty 3.94 47.24 S / 0 51
BS-150-57S heavy duty 5.91 47.24 S / 2 62
BS-200-57S heavy duty 7.87 47.24 S / 2 68
BS-225-57S heavy duty 8.86 47.24 S / 2 79
BS-250-57S heavy duty 9.84 47.24 S / 2 86
BS-300-57S heavy duty 11.81 47.24 S / 4 101
BS-350-57S heavy duty 13.78 47.24 S / 4 110
BS-400-57S heavy duty 15.75 47.24 S / 6 115
BS-450-57S heavy duty 17.72 47.24 S / 6 119
BS-500-57S heavy duty 19.69 47.24 S / 8 159
BS-600-57S heavy duty 23.62 47.24 S / 8 178
BS-800-57S heavy duty 31.50 47.24 S / 9 264
Package consists of: auger , wearparts
AccessoriesType Description
KM 501 1t-8t upper suspension w/o pendulum damper between rotator and excavator KM 511 1t-8t upper suspension with pendulum damper between rotator and excavator BV-1000-57 extension for augers – length 39.37 in (55 lbs)BV-1500-57 extension for augers – length 59.06 in (75 lbs)SW01 cardanic adapter SW01 for Lehnhoff grab exchange system MS01 without suspension – up to 2t/4400 lbsSW03 cardanic adapter SW08 for Lehnhoff grab exchange system MS03 without suspension – up to 5t/11000 lbsSW08 cardanic adapter SW08 for Lehnhoff grab exchange system MS/HS08 without suspension – up to 12t/26400 lbs
Technical Drawings
Available spare parts
BS-A pilot
BS-A exterior tooth
BS-A interior tooth
BS-S exterior tooth
BS-S interior tooth
BS-S pilot
BS-250-57A
BS-350-57S
Heavy duty auger BS-S
Standard auger BS-A
1 Drive unit2 Auger3 Wear parts (teeth & pilots)4 Extension
38We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
BAD / HYK / BOR Augers and Drives The BOR Auger Series is an economical solution for drilling holes for fence posts, poles, foundations, etc. in earth, clay or sandy soils. As an extra, the HYD Hydraulic Motor can be used for winching or (with the HD drive) even for milling. The BAD is a coupler with a cardanic suspension for the hydraulic motor/auger – Heavy Duty version also available.
l For winching, drilling, milling.l Available for all sizes of excavator or loader crane.l Extra strong: torques 811 - 8850 ft.lbs at 3024 - 6480 psi.l Heavy Duty version available with even 25% more power.l Special quick hitch coupler/motor-combination (HYD)
for horizontal and vertical drilling available.
Complete drilling rig consits of Coupler BAD, Drive HYK and Auger BOR
BAD
HYK
BOR
Hydraulic Motor HYK / Hydraulic Motor HYD with horizontal & vertical Quick Hitch AdapterType Drive Capacity max. Operating Pump Working Torque Coupling
pressure capacity width at 2880 psi(in) (cu.ft) (psi) (c.y.) (in) (ft.lbs)
HYK 12 2.8 0.06 5040 0.02 - 0.21 23.6 59 S60HYK 20 2.8 0.06 5040 0.02 - 0.21 23.6 59 B20 / S70HYK 30 2.8 0.11 6480 0.05 - 0.46 23.6 59 S60HYK 35 3.9 0.11 6480 0.05 - 0.46 23.6 59 B20 / S70 / S80HYD 01 - 0.02 - 0.03 5040 0.02 - 0.18 23.6 59 S40 / S45 / S50HYD 02 - 0.02 - 0.03 5040 0.02 - 0.18 23.6 59 S60HYD 03 - 0.02 - 0.03 5040 0.02 - 0.18 23.6 59 B20 / S70HYD 04 - 0.06 5040 0.02 - 0.21 23.6 59 S45 / S50HYD 05 - 0.06 5040 0.02 - 0.21 23.6 59 S60HYD 06 - 0.06 5040 0.02 - 0.21 23.6 59 B20 / S70HYD 08 - 0.11 6480 0.05 - 0.46 23.6 59 S60HYD 09 - 0.11 6480 0.05 - 0.46 23.6 59 B20 / S70 / S80
AugersType Drive Diameter Length Weight
(in) (in) (in) (lbs)BOR 01 2.8 3.9 43.3 46BOR 02 2.8 5.9 43.3 57BOR 03 2.8 7.9 43.3 68BOR 04 2.8 9.8 43.3 79BOR 05 2.8 11.8 43.3 88BOR 06 2.8 13.8 43.3 97BOR 07 2.8 15.8 43.3 130BOR 08 2.8 17.7 43.3 150BOR 09 2.8 11.8 43.3 169BOR 10 2.8 13.8 43.3 189BOR 11 2.8 15.8 43.3 209BOR 12 2.8 17.7 43.3 231BOR 13 2.8 20.9 43.3 255BOR 14 2.8 24.8 78.7 308BOR 14 3.9 24.8 78.7 352BOR 15 2.8 27.6 78.7 330BOR 15 3.9 27.6 78.7 374BOR 16 2.8 20.9 78.7 363BOR 16 3.9 20.9 78.7 407BOR 17 2.8 24.8 78.7 396BOR 17 3.9 24.8 78.7 440BOR 18 2.8 20.9 78.7 429BOR 18 3.9 24.8 78.7 473BOR 19 2.8 20.9 78.7 495BOR 19 3.9 24.8 78.7 539BOR 20 3.9 20.9 78.7 638BOR 21 4.7 24.8 78.7 506BOR 22 4.7 20.9 78.7 572BOR 23 4.7 24.8 78.7 671BOR 24 4.7 20.9 78.7 836BOR 25 4.7 24.8 78.7 1001
AccessoriesType Description Length Drive Coupling Auger attachment
(in) (in)BAD 6 auger
adapter /grapple adapter
- - S30 / S40 linkBAD 14 - - S45 / S50 linkBAD 18 - - S60 linkBAD 24 - - B20 linkBAD 33 - - B27 / S70 link
BFO 03auger
extension
39.4 2.8 -BFO 04 78.7 2.8 -BFO 05 39.4 3.9 -BFO 06 78.7 3.9 -
Optional:Tapered Auger for drilling in slopes
39
JVVRoad-Rail WagonThe Road-Rail Wagon JVV is the perfect trailer for road-rail excavators. It can be used e.g. for ballast or for all the excavator attachments needed on site.
l Wheels for both systems, rail and road.l Height of rubber wheels hydraulically adjustable.l Brakes on rubber and rail wheels.l Telescopic draw bar with adjustable height.l Light weight, but robust construction.l Fit for driving on regular streets.l Anchoring loops.
Road-Rail Wagon
Type Total Load Width Wagon height Flap height Weight Rail wheel Gauge Operatinglength length over rail Ø width weight
(in) (in) (in) (in) (in) (lbs) (in) (in) (t)JVV 224 197 98 24 36 132 17.7 or 21.7 56.4 depending on
country
Requirements of ExcavatorCoupling System: standard trailer draw bar
Pictures
We reserve the right to amend specifications without prior notice! KINSHOFER GmbH, D-83666 Waakirchen, Germany
40
EXA
-KIN
-TRA
-NA
-071
2
Up front, everywhere
Hauptsitz Deutschland: Kinshofer GmbHHauptstrasse 7683666 WaakirchenTel.: +49 (0)8021 – 88 99 0Fax: +49 (0)8021 – 88 99 37Email: [email protected]
North America: Kinshofer North America5040 Mainway Drive, Unit #11Burlington, ON L7L 7G5Tel.: +1 (905) 335 2856Fax: +1 (905) 335 4529Toll Free (North America): 1 (800) 268 9525Email: [email protected]
KINSHOFER is an ISO 9001 certified Company. DVS ZERT is a registred trademark of DVS ZERT® e.V., Düsseldorf.