radio receivers tecnology -...
TRANSCRIPT
104 105
69
11,529
73
10
3745
14
70
1336
Accessories
250TAUPROG Programmer for TAU rolling code transmitters
250ANTD1 Aerial with mounting bracket and 5 m cable
200 BATTBUG Batteries for T-4, k-SLIM and BUG2-4 transmitters
250ANTD Aerial with 5 m cable (to be mounted on LAMP flashing lights)
Radio receivers
250RXDC1 Self-learning, single-channel, 433,92 MHz plug-in radio receiver. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters.
250RXDC4 Self-learning, four-channel, 433,92 MHz radio receiver with enclosure. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters.
250RXDC2 Self-learning, two-channel, 433,92 MHz plug-in radio receiver. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters.
250RXDC4T 230 V Self-learning, four-channel, 433,92 MHz radio receiver with enclosure. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters.
250RXDC1B Self-learning, single-channel, 433,92 MHz radio receiver with enclosure. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters.
250E1RXD 126-code memory extension for RXDC self-learning radio receivers
250RXDC2B Self-learning, two-channel, 433,92 MHz radio receiver with enclosure. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters.
250E2RXD 264-code memory extension for RXDC self-learning radio receivers
250E3RXD 1020-code memory extension for RXDC self-learning radio receivers
250T-RADIO1Universal system made of one 433,92 MHz single-channel and self-learning receiver with built-in aerial and a two-channel k-SLIM transmitter with rolling code technology
250T-RADIO2Universal system made of one 433,92 MHz two-channel and self-learning receiver with built-in aerial and two four-channel T-4RP transmitters with rolling code technology
TRANSMITTERS AND
RADIO RECEIVERS
250K-SLIMRPTwo-channel transmitter, rolling code technology, 433,92 MHz
250BUG2RTwo-channel transmitter, rolling code technology, 433,92 MHz
250T-4RPFour-channel transmitter, rolling code technology, 433,92 MHz, com-plete with support
250BUG4RFour-channel transmitter, rolling code technology, 433,92 MHz
Features: • frequency: 433,92 MHz• range: up to 200 m in open air (the effective ran-ge depends on terrain and possible radio frequen-cy interferences)• 281.000 billion code combinations• rolling code technology: every time the transmit-ter sends a code, it generates a new code using an encoder. An algorithm identifies and validates only the signal of the transmitters encoded by the radio receiver.
Pros: • virtually impossible to duplicate• code can be personalized thanks to the TAU-PROG programmer• ideal for multi-user systems• a transmitter can be programmed into any num-ber of self-learning radio receivers, thus avoiding the use of different transmitters• tougher shells
Thanks to the TAUPROG handheld programmer and the new TAUPROG management software it is possi-ble to create and manage an access control databa-se, with a wide range of new functions. Rolling code transmitters can’t be duplicated or added an existing system unless enabled by the same TAUPROG han-dheld programmer, thanks to the unique code em-bedded in each TAUPROG encoder. The user-friendly TAUPROG database management software (PC ver-sion) stores database contents and allows multiple functions such as customize and add comments to every transmitter stored, add/remove new transmit-ters to an existing system, enable/disable codes, make back-up copies and prints.
NEW FUNCTIONS
ROLLING CODET E C N O L O G Y
106 107
69
11,529
73
10
3745
14
70
1336
85 18
51
250TXD2Two-channel transmitter, dipswitch tech-nology, 433,92 MHz
250TXD4Four-channel transmitter, dipswitch tech-nology, 433,92 MHz
Accessories
200 BATTTX Batteries for TXD2 and TXD4 transmitters
250ANTD1 Aerial with mounting bracket and 5 m cable
200 BATTBUG Batteries for T-4, k-SLIM and BUG2-4 transmitters
250ANTD Aerial with 5 m cable (to be mounted on LAMP flashing lights)
Radio receivers
250RXTS1 Dipswitch technology, single-channel, 433,92 MHz plug-in radio receiver.
250RXTS2 Dipswitch technology, two-channel, 433,92 MHz plug-in radio receiver.
250RXTS1B Dipswitch technology, single-channel, 433,92 MHz radio receiver with enclosure
250RXTS2B Dipswitch technology, two-channel, 433,92 MHz radio receiver with enclosure
250K-SLIMTwo-channel transmitter, dipswitch technology, 433,92 MHz
250BUG2Two-channel transmitter, dipswitch technology, 433,92 MHz
250T-4Four-channel transmitter, dipswitch technology, 433,92 MHz, complete with support
250BUG4Four-channel transmitter, dipswitch tech-nology, 433,92 MHz
Features: • frequency: 433,92 MHz• range: up to 200 m in open air (the effective ran-ge depends on terrain and possible radio frequen-cy interferences)• 1024 code combinations• dipswitch technology
Pros: • easy programming• code can be easily changed by setting the switches inside the transmitter• dipswitch transmitters can be programmed both in dipswitch and self-learning radio receivers• a transmitter can be programmed into any num-ber of self-learning radio receivers, thus avoiding the use of different transmitters• tougher shells
TRANSMITTERS AND
RADIO RECEIVERS DIP-SWITCH
T E C N O L O G Y
108 109
69
11,529
73
10
3745
14
Accessories
250ANTD1 Aerial with mounting bracket and 5 m cable
250ANTD Aerial with 5 m cable (to be mounted on LAMP flashing lights)
200 BATTBUG Batteries for T-4, k-SLIM and BUG2-4 transmitters
Radio receivers
250RXDC1 Self-learning, single-channel, 433,92 MHz plug-in radio receiver. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters.
250RXDC4 Self-learning, four-channel, 433,92 MHz radio receiver with enclosure. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters.
250RXDC2 Self-learning, two-channel, 433,92 MHz plug-in radio receiver. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters.
250RXDC4T 230 V Self-learning, four-channel, 433,92 MHz radio receiver with enclosure. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters.
250RXDC1B Self-learning, single-channel, 433,92 MHz radio receiver with enclosure. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters.
250E1RXD 126-code memory extension for RXDC self-learning radio receivers
250RXDC2B Self-learning, two-channel, 433,92 MHz radio receiver with enclosure. Accepts up to 62 rolling code transmitters or unlimited dipswitch transmitters.
250E2RXD 264-code memory extension for RXDC self-learning radio receivers
Features: • frequency: 433,92 MHz• range: up to 200 m in open air (the effective ran-ge depends on terrain and possible radio frequen-cy interferences)• 1024 code combinations• self-learning technology
Pros: • quick and easy programming, without opening the transmitter’s shell• code can be easily changed by setting the switches inside the transmitter• dipswitch transmitters can be programmed both in dipswitch and self-learning radio receivers• ideal for multi-user systems• a transmitter can be programmed into any num-ber of self-learning radio receivers, thus avoiding the use of different transmitters• tougher shells
250K-SLIMCTwo-channel transmitter, self-lear-ning technology, 433,92 MHz
250T-4CFour-channel transmitter, self-lear-ning technology, 433,92 MHz, com-plete with support
250E3RXD 1020-code memory extension for RXDC self-learning radio receivers
TRANSMITTERS AND
RADIO RECEIVERS SELF LEARNING
T E C N O L O G Y
110 111
Features: • synchronized infrared beams• maximum range 20 m• adjustable up to 180° (FOTEC / FOTS) • 12 / 24 V power input
Pros: • compact design• design suits any architectural style• 180° adjustable photocells are very useful when beams can’t be perfectly aligned
900FOTISet of infrared safety photocells, 12 / 24 V, flush mount, beam alignment adjustable up to 15°, up to 20 m range
900FOTECSet of infrared safety photocells, 12 / 24 V, surface mount, adjustable up to 180°, up to 10 m range
900FOTSSet of infrared safety photocells with wire-less transmitter, surface mount, adjustable up to 180°, up to 10 m range. Receiver: 12 /24 V; transmitter: wireless, 3,6 V battery with built-in solar panel
SAFETY DEVICES
FOTPhotocells
Features: • synchronized infrared beams• maximum range 20 m• beam alignment adjustable up to 15° • 12 / 24 V power input• surface mount (no welding required)
Pros: • compact design• design suits any architectural style• full range of accessories • removable mounting post cover for easy installation • photocells can be mounted inside the post in th-ree different positions• flat back post fits snugly against the wall and al-lows back-to-back installation
900OPTICSet of infrared safety photocells, 12 / 24 V, surface mount, beam alignment adjusta-ble up to 15°, up to 20 m range
900TOWERFPhotocell standard mounting post, pain-ted aluminium, 49 cm, with removable cover for easy installation and photocell adjustment
900TOWER2FPhotocell double mounting post, pain-ted aluminium, 98 cm, with removable cover for easy installation and photocell adjustment (optional key-switch and key-switch bracket to be ordered separately)
Photocells and Mounting posts
SAFETY DEVICES
OPTIC
Accessories
900CPTOWER TOWER counterplate
300TkEY Die-cast aluminium key switch
300TkEYS key switch bracket
300TkEYD Die-cast aluminium key switch, Euro Profile Cylinder
112 113
Features: • wide input voltage range 230 VAC, 24 VDC and 12 VDC• built-in aerial support• cycle count for maintenance alert available • built-in bracket for wall mount
Pros: • horizontal or vertical installation• versions with cycle count for maintenance alert will indicate when the requisite threshold (set by the user) has been reached
900LAMP112 V flashing light
900LAMP2230 V flashing light
900LAMP3230 V flashing light for TAU electronic control units
900LAMP412 V flashing light for TAU electronic control units
900LAMP524 V flashing light for TAU electronic control units
900LAMP3C230 V flashing light with cycle count for maintenance alert
900LAMP4C12 V flashing light with cycle count for maintenance alert
SAFETY DEVICES
LAMP
300RTAProximity transponder reader for access control. Maximum 80 users
Features: • 12 / 24 V power input• up to 80 users• NO / NC contact output• self-learning card memorization through master card
Pros: • ideal for small scale applications• simplified user management• 12 / 24 V power input• standalone system (no PC or special equipment needed) Accessories
300Pk key fob transponder
300CARD Transponder card
300APM 300RTA extended range aerial
for max. 80 users
ACCESS CONTROL
RTAFlashing light
114 115
Features: • electromechanical safety edge to stop the gate operator in case of impact • low voltage watertight micro switches • standard length: 1,2 and 1,8 m• controlled version available (8,2k Ω )
Pros: • ideal for up-and-over garage doors and swing gates• ensure compliance to EN 12445-12453 standards• possible wireless application; the safety edge fitted to the leading edge of the gate will offer ma-ximum safety and compliance to EN 12445-12453 standards
900KICM1201,20 m safety edge
900KICM1801,80 m safety edge
900KONT1201,20 m controlled safety edge (8,2K Ω)
900KONT1801,80 m controlled safety edge (8,2K Ω)
SAFETYEDGES
900TAP Set of 2 plugs for kICM/kONT
900CUR Set of 2 curves for kICM/kONT
900GIU Set of 2 joints for kICM/kONT
Features: • electromechanical safety edge to stop the gate operator in case of impact • rubber edge height: 60 mm • standard length: 1,5 and 2 m (longer edges avai-lable upon request)
Pros: • ideal for sliding gates and doors• possible wireless application; the safety edge fitted to the leading edge of the gate will offer ma-ximum safety and compliance to EN 12445-12453 standards
900KITCF2 m safety edge kit
900KITCF151,5 m safety edge kit
For sliding gates and doors
SAFETYEDGES
900TWC Wireless safety edge transmitter
900TWM Wireless safety edge master receiver
For up-and-over garage doors and swing gates
116 117
300TSG
300SC
300SES
300SCMS1
300SCE
300TSGWireless keypad, battery operated. Works with RXDC radio receivers or with electronic control units with built-in radio receiver
300SCEkey switch, surface mount
300SCKey switch, flush mount
300SESSurface-mounted, Europrofile cylinder, key switch with emergency release system and tamper-proof housing (for T-WIN central motors)
300SCMS1Magnetic key switch
OTHERACCESSORIES
300SCMS3 Decoder for 300SCMS1
300CMS Magnetic key
300SA1 Magnetic loop detector
300PPI Heavy duty pushbutton panel
300PP Pushbutton panel
Features: • available with standard or Europrofile cylinderdie-cast aluminium key switch• LED courtesy light available• surface or post mount
Pros: • tamper-proof• easy installation
300TKEYDie-cast aluminium key switch
300TKEYDDie-cast aluminium key switch, Europrofile cylinder
kEYSWITCHES
T-kEY
300TSL LED courtesy light for T-kEY
900TOWER2F Photocell double mounting post, painted aluminium, 98 cm, with removable cover for easy installation and photocell adjustment
300TkEYS key switch bracket
118 119
255
202
230101
255
202
230
131
750D750MElectronic control unit for one or two 230 V gate operators with soft-stop and built-in 433,92 MHz radio receiver, complete with enclosure
Accessories
S-750D752M10 Control unit enclosure protective lid
750COLC Control unit mounting post
Programmable Functions D750MAutomatic operation
Semiautomatic operation
Man present functions
Pre-flashing disable
Gate open led with proportional flashing
Gate open led
Limit switch
Photocell test at start of manoeuvre
Disable photocell test
Twin pair of photocells
Close 5 secs after photocells
Working time (TL) adjustment
Gate open time (TCA) adjustment
Gate open time (TCA) disable
Delay wing closing
Electronic force adjustment
Automatic realignment after black-out
Step-by-step operation (openstop-close-stop-open)
No reverse in opening manoeuvre
Pedestrian feature
Clock function
Encoder
Built-in radio card
Slow-down
Receiver preset for digital keypads
Outputs-Inputs D750MM1 outputM2 outputFlashing light outputCourtesy light outputElectric lock outputGate open LED output12 Vdc output for auxiliaries24 Vdc output for auxiliariesInternal photocell FTI outputExternal photocell FTE outputOpen/close inputPedestrian inputStop inputOpen button inputClose button inputSensitive edge input
For swing gates operators
ELECTRONIC CONTROL UNIT
D750M
750D747MElectronic control unit for one or two 12 V gate operators with encoder, complete with transformer and enclosure
ELECTRONIC CONTROL UNIT
D747MFor swing gate operators
12V O LT
Accessories
200BATT 12 V Battery, 7,2 Ah
750SCB12 Battery charger (optional)
S-750D752M10 Control unit enclosure protective lid
750COLC Control unit mounting post
Programmable Functions D747MAutomatic operation
Semiautomatic operation
Man present functions
Pre-flashing disable
Gate open led with proportional flashing
Gate open led
Limit switch
Photocell test at start of manoeuvre
Disable photocell test
Twin pair of photocells
Close 5 secs after photocells
Working time (TL) adjustment
Gate open time (TCA) adjustment
Gate open time (TCA) disable
Delay wing closing
Electronic force adjustment
Automatic realignment after black-out
Step-by-step operation (openstop-close-stop-open)
No reverse in opening manoeuvre
Pedestrian feature
Clock function
Encoder
Built-in radio card
Slow-down
Receiver preset for digital keypads
Outputs-Inputs D747MM1 outputM2 outputFlashing light outputCourtesy light outputElectric lock outputGate open LED output12 Vdc output for auxiliaries24 Vdc output for auxiliariesInternal photocell FTI outputExternal photocell FTE outputOpen/close inputPedestrian inputStop inputOpen button inputClose button inputSensitive edge input
120 121
255
202
230101
255
202
230
131
200K892MElectronic control unit for one or two 230 V up-and-over garage door openers with soft-stop, built-in 433,92 MHz radio receiver and enclosure
Programmable Functions K892MAutomatic operation
Semiautomatic operation
Man present functions
Pre-flashing disable
Gate open led with proportional flashing
Gate open led
Limit switch
Photocell test at start of manoeuvre
Disable photocell test
Twin pair of photocells
Close 5 secs after photocells
Working time (TL) adjustment
Gate open time (TCA) adjustment
Gate open time (TCA) disable
Delay wing closing
Electronic force adjustment
Automatic realignment after black-out
Step-by-step operation (openstop-close-stop-open)
No reverse in opening manoeuvre
Pedestrian feature
Clock function
Encoder
Built-in radio card
Slow-down
Receiver preset for digital keypads
Outputs-Inputs K892MM1 outputM2 outputFlashing light outputCourtesy light outputElectric lock outputGate open LED output12 Vdc output for auxiliaries24 Vdc output for auxiliariesInternal photocell FTI outputExternal photocell FTE outputOpen/close inputPedestrian inputStop inputOpen button inputClose button inputSensitive edge input
For up-and-over garage door openers
ELECTRONIC CONTROL UNIT
k892M
200K996MElectronic control unit for one or two 12 V up-and-over garage door openers with soft-stop, built-in 433,92 MHz radio receiver and enclosure
ELECTRONIC CONTROL UNIT
k996MFor up-and-over garage door openers
12V O LT
Accessories
200BATT 12 V Battery, 7,2 Ah
750SCB12 Battery charger (optional)
Programmable Functions K996MAutomatic operation
Semiautomatic operation
Man present functions
Pre-flashing disable
Gate open led with proportional flashing
Gate open led
Limit switch
Photocell test at start of manoeuvre
Disable photocell test
Twin pair of photocells
Close 5 secs after photocells
Working time (TL) adjustment
Gate open time (TCA) adjustment
Gate open time (TCA) disable
Delay wing closing
Electronic force adjustment
Automatic realignment after black-out
Step-by-step operation (openstop-close-stop-open)
No reverse in opening manoeuvre
Pedestrian feature
Clock function
Encoder
Built-in radio card
Slow-down
Receiver preset for digital keypads
Outputs-Inputs K996MM1 outputM2 outputFlashing light outputCourtesy light outputElectric lock outputGate open LED output12 Vdc output for auxiliaries24 Vdc output for auxiliariesInternal photocell FTI outputExternal photocell FTE outputOpen/close inputPedestrian inputStop inputOpen button inputClose button inputSensitive edge input
122 123
49
112
112139
255
202
230101
750K330MElectronic control unit for 230 V central motors with built-in 433,92 MHz radio receiver, complete with en-closure
Programmable Functions K330MAutomatic operation
Semiautomatic operation
Man present functions
Pre-flashing disable
Gate open led with proportional flashing
Gate open led
Limit switch
Photocell test at start of manoeuvre
Disable photocell test
Twin pair of photocells
Close 5 secs after photocells
Working time (TL) adjustment
Gate open time (TCA) adjustment
Gate open time (TCA) disable
Delay wing closing
Electronic force adjustment
Automatic realignment after black-out
Step-by-step operation (openstop-close-stop-open)
No reverse in opening manoeuvre
Pedestrian feature
Clock function
Encoder
Built-in radio card
Slow-down
Receiver preset for digital keypads
Outputs-Inputs K330MM1 outputM2 outputFlashing light outputCourtesy light outputElectric lock outputGate open LED output12 Vdc output for auxiliaries24 Vdc output for auxiliariesInternal photocell FTI outputExternal photocell FTE outputOpen/close inputPedestrian inputStop inputOpen button inputClose button inputSensitive edge input
For central motors
ELECTRONIC CONTROL UNIT
k330M
600D703230/400 V electronic control unit for one gate ope-rator with electrical brake, complete with enclosure
ELECTRONIC CONTROL UNIT
D703For commercial sliding gate operators
Accessories
S-750D752M10 Control unit enclosure protective lid
750COLC Control unit mounting post
Programmable Functions D703Automatic operation
Semiautomatic operation
Man present functions
Pre-flashing disable
Gate open led with proportional flashing
Gate open led
Limit switch
Photocell test at start of manoeuvre
Disable photocell test
Twin pair of photocells
Close 5 secs after photocells
Working time (TL) adjustment
Gate open time (TCA) adjustment
Gate open time (TCA) disable
Delay wing closing
Electronic force adjustment
Automatic realignment after black-out
Step-by-step operation (openstop-close-stop-open)
No reverse in opening manoeuvre
Pedestrian feature
Clock function
Encoder
Built-in radio card
Slow-down
Receiver preset for digital keypads
Outputs-Inputs D703M1 outputM2 outputFlashing light outputCourtesy light outputElectric lock outputGate open LED output12 Vdc output for auxiliaries24 Vdc output for auxiliariesInternal photocell FTI outputExternal photocell FTE outputOpen/close inputPedestrian inputStop inputOpen button inputClose button inputSensitive edge input
124 125
To find out the optimal size of the PV power system please contact our custo-mer care at: [email protected]
200MFR50 Watt photovoltaic panel complete with adjustment board and 27 AH battery
200MFR290 Watt photovoltaic panel complete with adjustment board and 27 AH battery
SOLAR POWER
MFR12V O LT
Features: • photovoltaic panels can be combined with all TAU 12 V operators• no need for power lines or a smart gridPros: • easy and quick installation• ideal when the installation is far from available power lines• battery ensures that the gate continues to work even in the event of prolonged cloudy weather• energy saving and environmental friendly
126 127
Point-Of-Purchase tools
Demo material
EXPO
C-SHOW01 Demogate with R18BENC underground swing gate operator
C-BLN Notepad
C-PENNA Pen
C-SHOW02 Demogate with T-ONE5B sliding gate operator
C-SHOW03 Demogate with ARM2000ENC swing gate operator
C-TOTEM Advertising totem pole, 165 cm
900FUSBUSB FORCE IMPACT GAUGESupplied in a cushioned carrying case complete with software (PC), USB cable for data transmission, handle key, memory up to 50 tests, instruction manual and calibration certificate. Linear extension for 30 to 50 cm included
900FBLUBLUETOOTH FORCE IMPACT GAUGESupplied in a cushioned carrying case complete with software (PC), Bluetooth Dongle key for data transmission, spanner for handle, memory up to 50 tests, instruction manual and calibration certificate. Linear extension for 30 to 50 cm included
IMPACT FORCE GAUGE
Features: • impact force gauge for automatic/power opera-ted doors/gates according to EN12445-EN12453 standards• display and internal storage allowing up to 50 measurements to be saved• interactive menu allows sending, deleting and scrolling saved tests
Pros: • quick and easy set-up and software installation • blue-tooth version allows a quick data transmis-sion to the PC for an immediate analysis of values and diagrams • with the extension (supplied) and the practical 180° turning handle all tests can easily be carried out even on difficult installations
128 129
A
L
B
C
260
90°
A
L
B
SALES CONDITIONS
Unless agreed otherwise, prices indicated in the current price-list are intended as ex works and inclusive packing in cardboard boxes. VAT and all Taxes are to the customer’s charge. The prices indicated in the current price-list are not binding and company TAU s.r.l. reserves the right to amend them without notice. TAU s.r.l. disclaims all resposibility for non-compliance of safety standars and for incorrect use of the product by unqualified installer. Company TAU s.r.l. conserves ownership of the goods supplied until such time as full payment has been made. For bulk quantities ask for offer.
DELIVERY: Ex works.GUARANTEE: See the certificate enclose to the product.
THESE GENERAL SALES CONDITIONS CANCEL AND REPLACE THE PREVIOUS VERSIONS IN USE.
SALESTERMS
N.B.: Due to its continued product improvement policy and its desire to more closely satisfy market requirements, TAU srl reserves the right to modify the technical data and the contents of this publication without prior notice. It also declines liability for any printing or transcription errors.
SPECS
Installation sizes (mm)*
EASYwith articulated arm
Installation sizes (mm)*
EASY with BRCE1
* Follow the instructions for the installation * Follow the instructions for the installation
ARM200Installation (mm)
EASYInstallation (mm)
ARM2000Installation (mm)
BRCE1Installation (mm)
140
minimo250 mm
90°
Code Door opening A B C LARM225 - ARM225BENC
90° 80 ÷ 180 110 ÷ 200 20 1080100° 100 ÷ 150 110 ÷ 150 20 1080
ARM250 - ARM250BENC
90° 80 ÷ 200 115 ÷ 250 20 1360100° 100 ÷ 200 115 ÷ 250 20 1360
ARM270 - ARM270BENC
90° 80 ÷ 250 120 ÷ 300 20 1570100° 130 ÷ 250 120 ÷ 300 20 1570
Code Door opening A B LARM2000/F - ARM2000ENC
90° 140 ÷ 190 150 ÷ 210 805100° 170 ÷ 175 150 ÷ 155 805
ARM2000FC 90° 140 ÷ 190 150 ÷ 210 775100° 170 ÷ 175 150 ÷ 155 775