racks - kontor

B i c y c l e R a c k s A d v a n t a g e s

• Allow the maximum number of bicycles in theminimum / smallest space

• Best suited for medium to long term parking

• Efficient bicycle storage

Long lasting and durable

Easily installed

Economical

A p p l i c a t i o n s

Residential apartments

Recreation centres

Workplaces

Secondary schools,TAFE colleges and universities

Retail shopping centres

Train and bus interchanges

M a t e r i a l sSecurabike Bicycle Racks are manufactured from high strength mild steel or aesthetically attractive stainless steel. While most models are available in both materials, please check the specification details on the product you are considering.

Mild steel units are available in hot dipped galvanised or electrostatically powder coated

• Stainless steel units are available in a linished finish orelectropolished.

Bicycle racks are the most popular method of parking or securing bicycles both in Australia and inter-nationally. They are normally the most economical option and the preferred choice by cyclists.Kontor extensive range of Securabike racks is designed to cater for virtually every type of application likely to be encountered. Whether for use in above or below ground parking, for 4 or 400 bicycles, Leda has a bicycle rack suitable.

Leda offers economical do-it-yourself units or fully welded units for use in locations where vandal resistance or high security is required.

As Australia’s largest manufacturer of bicycle parking products for over 19 years, Kontor and Leda provides you with the knowledge that when you specify or purchase a Leda bicycle rack you can be confident in selecting the best product available.

R a c k s

Kontor

www.kontor.net.au I t 1300 631 613

Australia’smost popular rack. 1000s

installed in Australia.

Kontor1300 631 613

Product Range > B icyc le Racks

T h e C o m p a c tPopular with cyclists as the leaning rail provides full support of the bicycle minimising the possibility of accidental damage. It also allows cyclists to securely locate the front or back wheel while allowing them to use a ‘U’ lock to secure the frame and the other wheel to the leaning rail.

Wheel supports have staggered heights which allows bicycles to be located with 300mm spacings rather than the normal 600mm with other racks.In outdoor locations where vandal resistance may be a consideration, Leda recommends the fully-welded model (CBR4SCTM), made from heavier steel sections to provide a more robust alternative.

The CBR4SC is the logical choice when catering for and securing large numbers of bicycles – doubling the number that can be securely parked in a given area.

Kontor


Material Specifications (General)32NB (38.1) x 1.6mm Pipe / Powder Coated / Hot Dipped Galvanised FinishRails

Supports Ø19 x 1.2mm Pipe / Powder Coated / Hot Dipped Galvanised Finish

CBR4SCPowder Coated

CBR4SCGHot Dipped Galvanised

End View1058

Front View1200

828

300Spacing between multiple racks

300

HDPE plastic sleeveprotects bicycle

Single-sided access

Ø38 PipeLeaning Rail

Ø19 PipeWheel Supports

30 x 8mm Base Rail

Flat PackCompact CBR4SC

4BIKE

PARKING

Australia’smost popular rack. 1000s installed in

Australia.

The Compact Security Bicycle Rack is supplied in flatpack for do-it-yourself installation.

Security Rails and Wheel Supports are supplied unattached and can be quickly bolted to

the Base Rail to provide Single, Double Sided or Angled units.

Countersunksocket screws

M12 x 20Base Rails

Masonry anchor12 x 60mm

Supplied in Flatpack (1000 x

830 x 140mm)

P roduct Range > B icyc le Racks > Hor i zon ta l

Kontor


Material Specifications (General)Mild Steel 32NB (42.2) x 2.6mm / Ø19 x 1.2mm Pipe / 8mm Plate / Hot Dipped Galvanised / Powder coated in a range of colours Stainless Steel 32NB(42.2) x 2.77mm / Ø19 x 1.2mm Stainless Steel Pipe / 8mm Plate / Linished

This fully welded unit is supplied ready to be bolted down. It is available in either hot dipped galvanised or stainless steel. Being fully welded, it is more suitable for vandal resistant applications.


32NB PipeLeaning Rails


End View1058

Front View2240

830

400 Typical 800

CBR6SC Powder coatedCBR6SCGHot Dipped Galvanised

SCBR6SC Stainless steel

40 x 8mm Base Rails

BicycleSpacings400mm

VandalResistant

6BIKE

PARKING

Fully-weldedCompact CBR4SCTM



Compact CBR6SC

End View1058

Front View1200

830

300 TypicalSpacing between multiple racks

300

CBR4SCTMHot Dipped Galvanised

SCBR4SCTMStainless Steel HDPE plastic sleeve

protects bicycle

40 x 8mm Base RailsSingle-sided access

Single-sided access

Provides wider spacings for easier

parking

4BIKE

PARKING

Product Range > B icyc le Racks > Hor i zonta l

Kontor1300 631 613

Kontor


Material Specifications (General)Mild Steel 32NB (42.2) x 2.6mm / Ø19 x 1.2mm Pipe / 8mm Plate / Hot Dipped Galvanised / Powder coated in a range of colours Stainless Steel 32NB(42.2) x 2.77mm / Ø19 x 1.2mm Stainless Steel Pipe / 8mm Plate / Linished

CBR4SC SL



Tracks

Single-sided access

Front View1500

Top View

End View1840

865

1800

CBR4SC SLHot Dipped Galvanised

SCBR4SC SL Stainless steel

400 Typical


4BIKE

PARKING

Space can be tight in busy bicycle parking stations so the CBR4SC SL is designed to slide bicycles apart giving cyclists more room to move,and allowing easier locking of bicycles.

Casters

Multiple rack installation

Rack slides to allow easy access to bicycles


Kontor


Material Specifications (General)Mild Steel 32NB (42.2) x 2.6mm / 20NB (26.9) x 2.3mm Pipe / Hot Dipped Galvanised / Powder coated in a range of colours Stainless Steel 32NB(42.2) x 2.77mm / 20NB (26.7) x 2.11mm Pipe / Linished

65 x 8mm Base Rails

65 x 8mm Base Rails

65 x 8mm Base Rails

20NB PipeWheel Supports

20NB Pipe wheel support

20NB PipeWheel Supports

32NB Pipe leaning rails



Delta CBR2B

Delta CBR6B

Delta CBR4B

CBR2BGalvanised / Powder Coated

SCBR2B Stainless steel

End View1075

Front View450

450

450 300Typical

400Typical

450





End View1075

Front View1200

875

875

End View1075

Front View2240

300

875

Single-sided access

Single-sided access

Single-sided access

2BIKE

PARKING

4BIKE

PARKING

6BIKE

PARKING


Kontor1300 631 613

Kontor


Material Specifications (General)CBR88 Galvanised 40NB (48.3) x 3.2mm / 25NB (33.7) x 2.6mm / 20NB (26.9) x 2.6mm Pipe / Powder coated in a range of colours

Stainless Steel 40NB (48.26) x 2.77mm / 25NB (33.4) x 2.77mm / 20NB (26.7) x 2.11mm Stainless Steel Pipe / Linished

Best suited for double-sided access

40NB Pipe

20NB

Hitching Rail

Plastic cap

Concealed fixing10 x 85mm flat head

masonry anchors

While the narrow width of the CBR88 (950mm) makes it ideal for use on footpaths, all models are perfect for use in public areas where double sided access is available.

950

Typical End View924

Front View950

4 Bicycle Capacity

CBR88Galvanised / Powder Coated

SCBR88 Stainless steel

Bicycle Capacity 4 6 8 10Overall Length 950 1200 1450 1700Galvanised CBR88 CBR128 CBR148 CBR178Stainless Steel SCBR88 SCBR128 SCBR148 SCBR178

CBR128

CBR88

CBR148

CBR178

Concord CBR88

6BIKE

PARKING

8BIKE

PARKING

4BIKE

PARKING

BIKEPARKING


Kontor


Stainless Steel. 40NB (48.26) x 2.77mm / 25NB (33.4) x 2.77mm / 20NB (26.7) x 2.11mm Stainless Steel Pipe /

Linished BR44 8mm Plate /Stainless Steel / Hot Dipped Galvanised or Powder coated in a range of colours

900

End View900

Front View1700

CBR55Galvanised / Powder Coated

SCBR55 Stainless Steel

200x 200 x 8 Baseplate

40NB Pipe25NB

Hitching Rail

Best suited fordouble-sided access

Comet CBR55

6BIKE

PARKING


Kontor1300 631 613

Kontor


Material Specifications (General)Mild Steel 8mm Mild Steel Plate / 40NB (48.3) x 3.2mm / 20NB (26.9) x 2.3mm Pipe / Galvanised or Powder coated in a range of coloursStainless Steel 8mm Stainless Steel Plate / 40NB (48.26) x 2.77mm / 20NB (26.7) x 2.11mm Stainless Steel Pipe / Linished

ConcorSentry BR158Fd BR158

20NBRail40NB Pipe

20NBRail

40NB Pipe

Concealed fixing85mm flat head

masonry anchors

BR158FGalvanised / Powder Coated

SBR158F Stainless Steel

BR158BGalvanised / Powder Coated

SBR158B Stainless Steel

Front View1500

End View

800

200

End View500

Front View1500

800

Sentry BR158B

Plastic capBest suited for

double-sided access

Best suited fordouble-sided access

5BIKE

PARKING

5BIKE

PARKING


Kontor


Material Specifications (General)80NB (88.9) x 4.0mm Heavy Duty Pipe / 25Ø Pipe / MS Plate / Hot Dipped Galvanised / Powder coated in a range of colours

70°

UBS2

865

65

355

Front View530

Top View

End View400

Wheel support

Masonry anchor fixingSingle-sided

access

25Ø Pipe Rail with Plastic Protection

80NB Pipe

Universal Bike StationA double bicycle parking station that allows cyclists to locate and secure their bicycle (using their own lock).

55The bicycle station is an extremely flexible parking system that can be installed in a number of configurations to maximise the use of available space.

Regiment Layout

Pavement Layout

Garden Layout


Kontor1300 631 613

Kontor


Material Specifications (General)Frame 50 x 50 x 2.5mm SHS / Powder Coated / Hot Dipped Galvanised Finish Wheel Supports Ø19 x 1.2mm Pipe / Powder Coated / Hot Dipped Galvanised Finish

1299

899

351

1832

Bicycle lock cables

BRC01/02/04/08 Café Racks

Signage can be custom-designed to incorporate logos or advertising

Lockable casters

2BIKE

PARKING

8BIKE

PARKING

4BIKE

PARKING

1BIKE

PARKING

BRC04Front View

411End View

975

BRC01Front View

300End View

482

BRC02Front View

325End View

965

Ideal for attracting cyclists to your location. Leda’s Café Racks can be positioned conveniently for cyclists in secure and convenient locations.When the facility is closed, the racks can be simply stored away.

BRC08Front View

1430End View

604

BRC01

BRC02

BRC04

BRC08


Kontor


Material Specifications (General)125 x 75 x 3mm RHS / Hot dipped galvanised / Powder coated in a range of coloursFrame

Extensions 65 x 65 x 3mm Track / 75 x 40 x 4mm Channel / 20NB (26.9) x 2.3mm Pipe / Hot dipped galvanised

Can be installed at an angle to increase aisle widths

Bottom bicycle rack (CBR1B)is included in the price.Note: 2 x CBR2GS racks are illustrated to show staggering of heights.Each CBR2GS rack can park a single bicycle on the upper and lower levels for a total of 2 bicycles.

Bottom bicycle rack (CBR1B)is included in the price.

Provides the maximum utilisation of allocated horizontal storage and parking, and is easy to use.Simply pull out the sliding base rail until it reaches its pivot point, and fold down to allow easy positioning of your bicycle. A leaning rail provides stability and a secure point for locking.

CBR2GS

Minimum Ceiling Height

Wall

Opposing unit

3000

20NB PipeLeaning Rail

125 x 75 Frame

Supplied in knock-down kit form for easy assembly on site.

Tracks

Single Installation Recommended Clear Area4200

400 Typical

795

2572

2262Nom

4BIKE

PARKING

Double Height Storage

Front View

Double Installation Recommended Clear Area

6200

2262 Nom

Double Installation Nominal Aisle Width

1100

Single Installation Nominal Aisle Width

1250

2572Nom

Top View

2940 Nom

CBR2GS is also available in a double storey locker. Refer Lockers section.

Product Range > B icyc le Racks > Hor i zonta lKontor

1300 631 613

Kontor


Material Specifications (General)125 x 75 x 3mm RHS / Hot dipped galvanised / Powder coated in a range of coloursFrame

Extensions 65 x 65 x 3mm Track / 75 x 40 x 4mm Channel / 20NB (26.9) x 2.3mm Pipe / Hot dipped galvanised

Bottom bicycle rack (CBR4B) is included in the price.

Provides the maximum utilisation of allocated horizontal storage and parking, and is easy to use. Simply pull out the sliding base rail until it reaches its pivot point and fold down to allow easy positioning of your bicycle. A leaning rail provides stability and a secure point for locking.


125 x 75 Frame


Tracks

400 Typical

2540Nom

1840Nom

2075Nom

8BIKE

PARKING

CBR8GSDouble Height Storage

Front View

Top View1600


Opposing unit

3000

1840Nom

2540Nom


6000

2075 Nom

2750 Nom


1100

Wall


1250



Kontor


Frame 125 x 75 x 3mm RHS / Hot dipped galvanised / Powder coated in a range of colours Extensions 65 x 65 x 3mm Track / 75 x 40 x 4mm Channel 20NB (26.9) x 2.3mm Pipe / Hot dipped galvanised

Lifting bicycles can be difficult or undesirable for many cyclists such as the elderly.This automated dual height bicycle rack is the first of its kind and provides the capacity to double bicycle parking spaces without the requirement for cyclists to lift their bicycle into position on the top level.


Opposing unit

3000

125 x 75 Frame

Tracks

2075Nom

1840Nom

CBR8GSA Double Height Storage

2540Nom

Top View1600

Bottom bicycle rack (CBR4B) is included in the price.



8BIKE

PARKING

Automated

As the unit is automated, the top rack can be extended right down to the ground so cyclists are able to wheel their bike onto the rack without the need to lift it into position. The security rail is conveniently located so the cyclist can then attach their U-lock to the frame and wheel. Safety FeaturesOperation of the rack both in and out is by ‘pressing and holding’ the up or down button, conveniently located on the handle. If the cyclist removes their hand, the rack will stop immediately. The cyclist is also in a good position to watch for other pedestrians and cyclists in the aisle.The electric motors are 24VDC and low maintenance. Lifting capacity is for bicycles up to 30kg.There is no automation on the lower level.

400 Typical

2540Nom

1840Nom

Front View


6000

2075 Nom

2750 Nom


1100

Wall


1250



Kontor1300 631 613

Kontor


Material Specifications (General)40 x 40 SHS / Hot dipped galvanised / Powder coated in a range of coloursFrame

Supports 20NB (25.0) x 1.2mm Pipe / 70 x 35 x 2mm Track / Powder Coated / Hot Dipped Galvanised Finish

Material Specifications (General)Rails 32NB (38.1) x 1.6mm Pipe / Powder Coated / Hot Dipped Galvanised FinishSupports 20NB (25.0) x 1.2mm Pipe / Powder Coated / Hot Dipped Galvanised Finish

Leda’s double height bicycle racks provide the maximum utilisation of allocated storage and parking areas

CBR8M Double Height Storage

Manual

1380

Top View

Top View End View

40 x 40Frame

20NB Wheel Supports and Leaning Rail 70 x 35

Wheel Track

Supplied in knock-down kit form for easy assembly on site.Fully welded units are also available, but prove more difficult to freight.

1600 1600

400

MinimumCeiling Height

2500

8BIKE

PARKING


Kontor


Drainage holesin planter base

32NB Pipe

BRP01Planter Box

BRP02Planter Box

Material Specifications (General) Planter 1.5mm Galvanised sheet / Powder coated in a range of colours

Rack 32NB (38.1) x 1.6mm Pipe Galvanised / Powder coated in a range of colours

1000

1800

800

250

306

917

350

1223

Top View

End View

214

1800

1800

800

250

306

917

350

2140

Top View

End View

214

1000

HDPE sleeve shown is optional and recommended to protect the bicycle


6BIKE

PARKING

BIKEPARKING

Product Range > B icyc le Racks > Hor i zonta lKontor

1300 631 613

Kontor


350 deep planter box, drainage holes in base

BRP03 planter boxIllustrated

BRP03 / 04 / 05 Planter Boxes

Material Specifications (General) 1.5mm Galvanised sheet / Powder coated in a range of coloursPlanter

Rack 32NB (38.1) x 1.6mm Pipe Galvanised / Powder coated in a range of colours

1000800

250 Typical

250 Typical

1800

BRP04Top View

BRP03Top View

End View End View

1800

End View

BRP05Top View

6024

1000800

4212

306 Typical

4600 1000

250 Typical

6BIKE

PARKING

BIKEPARKING


BIKEPARKING

Greenyour suburb


Kontor


The Peloton bicycle rack is the ultimate in road bike racks.No other rack promotes cycling as strongly as the Peloton. This is a bicycle rack for communities looking to make a statement.

PSBR03F/BPeloton

Material Specifications (General)50 x 50 SHS Mild Steel / 32NB (38.1) x 1.6mm Pipe / Galvanised / Powder coated in a range of coloursRack

Profile 8mm Mild Steel Plate / Powder coated in a range of colours

4795 985

Front View(view from pavement)

Top View

End View

985

400Typical

1644

739

Line of kerb

Standard Parking Spaces 5400 x 2400

Thoroughfare

Footpath

2200

BIKEPARKING

50 SHS

10mm Plate

32NB pipe rails with protective

sleeve

An easy way of converting street-located car spaces to a parking facility of up to 12 bicycles. Ideal for local governments to provide temporary or permanent secure bicycle parking.


Kontor1300 631 613

Kontor



Profile 65NB (76.1) x 3.6mm Pipe / Galvanised / Powder coated in a range of colours

65NB pipe frame

50 SHS

32NB pipe rails with protective sleeve

The fixed insitu (CSBR01F) model is best suited for permanent installations or in bitumen surfaces, while the base plate model (CSBR01B) can be bolted down onto concrete surfaces or footings.

CSBR01F / BCadillac

5400

End Section Sleeve End Section

10404600


Top View

End View

Manufactured in 2 mirror-reversed sections with sleeve straight section

1040

400

1274

742

Line of kerb


Thoroughfare

Footpath

2200


BIKEPARKING


Kontor



Profile 65NB (76.1) x 3.6mm Pipe / Galvanised / Powder coated in a range of colours

65NB pipe frame

50 SHS

32NB pipe rails with protective sleeve

CSBR02F / BLincoln

5400 14704600


Top View

End View

1470

400

1274

742

Line of kerb


Thoroughfare

Footpath


2200

End Section Sleeve End Section

Manufactured in 2 mirror-reversed sections with sleeve straight section

The fixed insitu (CSBR02F) model is best suited for permanent installations or in bitumen surfaces, while the base plate model (CSBR02B) can be bolted down onto concrete surfaces or footings.

8BIKE

PARKING


Kontor 1300 631 613

Kontor


BRT1School Rack

Galvanised / Powder Coated

Many schools require a low cost bicycle rack without security.The BRT1 range is both economical and practical for such application.

BRT3School Rack

Galvanised / Powder Coated

Staggered heights allows increased capacity with easier access.

SchoolSpecial

SchoolSpecial

Material Specifications (General)Mild Steel 8mm round bar / Powder coated

2BIKE

PARKING

2BIKE

PARKING

368

60

End View

Top View

325Side View

180

325

368

60

End View

Top View

325Side View

175144

328

325


Kontor


Material Specifications (General)50 x 50 x 2.5mm SHS / 12Ø Rod / 8mm MS Plate / Hot Dipped Galvanised / Powder coated in a range of colours PVC coated steel cable assembly

50 SHS

200 x 200 x 8 Baseplate

BR2101

2145

TypicalFront View

340

SingleEnd View

330Top View400 nom

Back to BackEnd View

660

12mm ØWheel

Support

Cable Assemblies

12mm Ø HangerPVC Coated

325 nom

Typical Installation Arrangement Critical Dimension

650

Back to BackArrangement

BR2101

Back to BackMultiple Unit Arrangement 16 bicycle capacity shown

4BIKE

PARKING

2BIKE

PARKING

MostPopular

Product Range > B icyc le Racks > Ver t ica l

Kontor 1300 631 613

Kontor


Material Specifications (General) Mild steel 20NB (26.9) x 2.6mm Medium Duty Pipe / Ø12 Hanging Pins / Galvanised / Powder coated in a range of coloursStainless Steel 20NB (26.9) x 2.6mm Grade 304 Stainless Steel Pipe / Ø12 Hanging Pins / Linished

BR66FGalvanised / Powder Coated

SBR66FStainless Steel

Front View Side View610

510

110 x 50Wall Plate

20NB Pipe

100mm Hanging Pins

450 shown300-450 spacings are typical, depending on the storage density levels required

Front View

Multiple Installation GuideUtilising the available wall space in the bicycle parking location, helps maximise the number of bicycles that can be securely stored.

Staggering the height of the BR66F Hanging Rail also allows greater storage capacity.

Vertical Bicycle Storage

BR66FWall Mount

2100

1800Minimum


Kontor


Material Specifications (General) 30 x 30 x 3mm SHS / Hot dipped galvanised / Powder coated in a range of colours100 x 40 x 8mm MS plate / Hot dipped galvanised / Powder coated in a range of colours

Side View423

Front View320

40

565

Front View650 Typical

Multiple Installation GuideUtilising the available wall space in the bicycle parking location, helps maximise the number of bicycles that can be securely stored.

30 x 30 x 3

SHS Vertical Bicycle Storage2 bicycle capacity

BR542FWall Mount

295

100 x 40Wall Plate

Hanging Pins

Crimped wire rope

2100 1800

Biggestwall mounted

seller


Kontor 1300 631 613

Kontor


Material Specifications (General)Frame 40 x 40 x 4mm Mild Steel Angle / Hot Dipped Galvanised / Powder coated in a range of coloursTrack / Rails 3mm Mild Steel Plate / 20NB (26.9) x 2.3mm Pipe / Hot Dipped Galvanised or Powder coated in a range of colours

40mm Angle Frame

Easy to useback wheelroll on / roll off

Plasma-cutTrack


BRV26Vertical

2100

End View1394

400 Typical200

Front View2400

Top View

Using a modular angular steel frame, the BRV26 is supplied in knock-down kit form allowing it to be easily transported and quickly bolted together on site.

6BIKE

PARKING


Kontor


BR95Commuter

The commuter rack was designed for the workplace as the vertical storage saves space and the shelves allow storage for the cyclist’s riding gear.

Clean up yourbicycle storage area if it starts to look like a laundry

Recommendedspacing

between racks300mm

Material Specifications (General)

Mild Steel 20NB (26.9) x 2.6mm Medium Duty Pipe / Galvanised / Powder coated in a range of colours

Utilising walls, and even ceilings, can often provide additional bicycle storage capacity.

Front View210

Side View

1200

100

Vertical Bicycle Storage

300 x 50 Ceiling Plate

20NB Pipe

100mmHanging Pins(verticaladjustable)

Hanging Pins(verticaladjustable)

RR12F Ceiling Mount

Front View395

312

624Recommended

spacing between racks

300mm

Side View342

Top View


Kontor 1300 631 613

Kontor


BR72Swivel

The swivel rack is the ultimate flexibility by allowing movement od surrounding bike so that cyclists can better access their bicycles. This rack also allows vertical movement which can cater for a variety of bicycles sizes. Not recommended for bicycles with mud guards on front wheels

BR72TROptional wall mounted horizontal track for even more space flexibility

Nominal heightof 1200 off flooris recommended

Material Specifications (General)Mild Steel 2mm Mild Steel Plate / Galvanised / Powder coated in a range of colours

Front View80

Side View655

600

Nominal heightof 1200 off flooris recommended


Kontor


BRX01X Rack

Material Specifications (General)2mm Mild Steel Plate / Galvanised / Powder coated in a range of colours 20NB (26.9) x 2.3mm Pipe / Galvanised / Powder coated in a range of colours

The X Rack is one of Securabike’s ultimate bicycle racks as it alone can:

Act as a ramp so no lifting of bicycle requiredStore bicycles vertically for space efficiencyIs supplied flat packed, so small freight componentQuick and easy to bolt down and installOptional security rail to secure frame and wheelsAllows crossover X design to maximise spaceAdjustable height so you can stagger racks

1160

End ViewHeight and Width Adjustable

Typical Configuration End ViewNominal Dimensions

End View Top View168

Adjustableheight

Adjustableheight

Security rail

Quick and easyto bolt down

Vertical or horizontal bicycle storage

Racks can bestaggered and / or opposed

Typical Configuration

Staggered heights

Access one side

Staggered HeightOpposed

14001160

1400

300 min

Accessone side

Typical Configuration

Staggered heights /

opposedAccess two sides

300 min

300 min

Accesstwo sides

Accesstwo sides

862

1180

862

1180

1543

1595

44

5

670

775

Variable Height

80


Kontor 1300 631 613

Kontor


Loading Point

Ideal for installation into tight locations

Material Specifications (General)Steel frame / chequerplate floor Turnstile

Bicycle Rack 20NB (26.9) x 2.3mm Pipe / 3mm steel plate / Hot dipped galvanised or powder coated in a range of colours

Carousel CBR12

Top View3006

Front View

1796

This innovative space-efficient design provides a rack catering for up to 12 bicycles. Ideal for ‘difficult to get to’ locations, it is easy to load bicycles by wheeling up the front wheel until the back wheel locates in the guide. Leaning rails provide support and a means to secure the bicycle

Vertical Secure Parking for up to 12 bicycles

Wheel Guides

Leaning Rails

Turntable (4 piece)

BIKEPARKING

The carousel rack can also be incorporated into a modular cage fitted with a lockable pedestrian gate with optional electronic locking.


Kontor


CBR12MGalvanised Mesh

Surround

CBR12PPremier Fencing

Surround

CBR12SSolid Sheet Metal

Surround

Pedestrian Gatewith magnetic locks and access control



3740

3760

3760

Loading Point

Loading Point

Loading Point

Surround shown partly transparent

for clarity

Top View3760

Top View3760

Top View3740

2600High

2400High

2600High

Carousel CBR12Modular Cages

Kontor


Kontor 1300 631 613

Material Specifications (General)Mild Steel 40NB(48.3) x 3.2mm / 20NB (26.9) x 2.6mm Pipe / 10mm Mild Steel Plate / Galvanised / Powder coated in a range of coloursStainless Steel 40NB(48.26) x 2.77mm / 20NB (26.9) x 2.6mm Stainless Steel Pipe / 10mm Plate / Linished

150 Ø Baseplates40NB Frame

40NB Frame

Ideal for medium density bicycle parking in urban areas. The BT01 and BT02 Bicycle Trees provide secure vertical storage,

and significantly reduce the area required for bicycle parking allocation, while providing protection for existing vegetation.

1700

BT01Top View

BT02Top View

BT01

BT02

BT01 / 02Bicycle Trees

Front View1200

Front View1200

1500

8BIKE

PARKING

8BIKE

PARKING

DBH02 Hooks(Refer Domestic Products)

66

Kontor


Material Specifications (General)BT01/BT02 40NB(48.3) x 3.2mm / 20NB (26.9) x 2.6mm Pipe / 10mm Mild Steel Plate / Galvanised / Powder coated in a range of colours

40NB(48.26) x 2.77mm / 20NB (26.9) x 2.6mm Stainless Steel Pipe / 10mm Plate / LinishedBT03 125 x 4mm SHS / Galvanised / Powder coated in a range of colours / Stainless Steel

Ideal for medium density bicycle parking in urban areas. The BT03 and BT04 Bicycle Trees provide secure vertical storage,

and significantly reduce the area required for bicycle parking allocation,

BT03Top View

BT04Top View

BT03

BT04

DBH02 Hooks(Refer Domestic)

DBH04 Hooks(Refer Domestic)

SHS Post

1800

2300

BT03 / 04 Bicycle Trees

4BIKE

PARKING

Front View1260

Front View

BIKEPARKING

Kontor


Kontor 1300 631 613

Kontor Commercial Pty Ltd

39 Cavan Road, Gepps CrossSouth Australia 5094

www.kontor.net.auT 1300 631 613

[email protected]

ABN 41 615 322 999

racks - kontor

Documents