rack and pinion presentation
DESCRIPTION
This presentation shows how rack and pinion drive is used to cut profiles requiring high precision and speedTRANSCRIPT
CUTTING TRIALS OF BIRD PROFILE FOR SIAM FIBER IN WATER JET MACHINE WITH RACK-AND-PINION
DRIVE MECHANISM
IntroductionIntroductionWATER JET GERMANY PVT. LTD.,
Chennai, has newly built a Water jet machine with rack and pinion mechanism.
The cutting trials of bird profile were made with that machine for Siam Fiber to check its accuracy and advantages of rack and pinion.
The trials were made with ply wood, since Siam Fiber cutting material was not available with us.
The results of the trial and visual samples are presented.
Template cut at 4.5m/min in Template cut at 4.5m/min in Rack and Pinion Water Jet Rack and Pinion Water Jet MachineMachine
Template Cut with Slow Speed of 4.5m/min to
compare with high speed 15m/min samples of Siam
Fiber profile
Profile Cut with 15m/minProfile Cut with 15m/min
BIRD PROFILE CUT of Siam Fiber with speed of 15m/min and observed profile accuracy of 0.3mm after
tuning some parameters, accuracy can be made better with Siam Fiber Material(material used here is ply
wood) and also by further tuning of parameters
Matching of Template and Matching of Template and Profile Profile
The Template cut made with Slow Speed and Bird Profile cut at 15000m/min are matched together with Highest Accuracy of 0.3mm
Siam Fiber Bird Profile Cut with Maximum accuracy with Rack and Pinion and feed
of15m/min
Zoomed View of Matching Zoomed View of Matching between sample and between sample and templatetemplate
Siam Fiber Profile cut at
15m/min
Template cut at 4.5m/min
Image of Water Jet Machine Image of Water Jet Machine with Rack and Pinion with Rack and Pinion Mechanism Mechanism
Video Of Machine showing Video Of Machine showing running the Bird Profile of Siam running the Bird Profile of Siam Fiber in Dry RunFiber in Dry Run
Advantages of Water Jet Advantages of Water Jet Machine with Rack and Machine with Rack and Pinion for Siam Fiber Pinion for Siam Fiber The test proves that high accuracies of 0.1 – 0.2
mm can be achieved at high speeds using rack and pinion mechanism.
Vibrations in rack and pinion machines are extremely less since rack and pinion are rigidly fixed to the machine body unlike ball-screw which is fixed only at two end points of the machine.
Rapid movement speeds of up to 35mm/min can be achieved reducing the cycle time drastically.
For Linear Cutting the feed can be around 20m/min
Low vibrations ensure long life of the machine.The cycle time for cutting 8 pieces of Siam Fiber
profile was 71 secs in the test conducted, which can be further reduced.
Conclusion from Test Result Conclusion from Test Result from Water Jet Germany from Water Jet Germany Pvt.LtdPvt.LtdFrom the test conducted by us we
conclude that using the Rack and pinion mechanism on both X and Y axes gives more reliable and stable result with highest accuracy , high speed, less vibration and long machine life which is suitable for Siam Fiber
If Siam Fiber provide some sample materials we can perform the same test and provide the results.