r model mack mail order parts catalogue model mack mail order parts catalogue ... suit 675 and other...

TYLDEN HERITAGE R MODEL MACK

MAIL ORDER PARTS

CATALOGUE Custom Classic Truck & Tractor Restorations

Business Hours: 0428 507 408

Location: 1906 Trentham Road, Kyneton Vic 3444 Australia

Note: Our workshop & warehouse are only open by appointment

Postal Address: P.O. Box 614, Kyneton Vic 3444 Australia

Supplier of after market Mack reproduction and dress up parts

Big range of Mack ‘B’ & “R” Model bits. Special Interest in:

Mack Trucks...........Diamond T Trucks......Caterpillar Tractors Trading since 1961

Email: [email protected] web: www.tyldenheritage.com.au

Lee No 3 Pty Ltd – A.C.N. 005 204 599 A.B.N. 40 005 204 599 These pages may only be reproduced after obtaining written permission from Tylden Heritage.

All rights reserved.

1956 Mack LTL Diesel

mailto:[email protected]

http://www.tyldenheritage.com.au/

INDEX FOR R MACK PARTS

1R. AXLE: Section 1

CHASSIS: Section 1. Bumper, Fuel Tank, Mudflaps, Steering, Tail Shaft. ENGINE: Section 1: Radiator, Starter Motor. 2R BONNET Section 2: Latches, JEWELLERY: Dogs, Emblems. 3R CABIN INTERIOR: Section 3. 4R CABIN EXTERIOR: Section 4. 5R DOOR PARTS: Section 5.

SEE GENERAL SECTION CATALOGUE FOR OTHER PART OPTIONS

- Parts for Axle, Brakes, Catches, Dress Up, Electrical, Parts Books, Rubber Parts, Reproduction Cast Parts, Steel Name Plates & Instruction Plates & Stickers.

5/13/2016

SECTION 1---- R SERIES MACK PARTS

ALL PRICES ARE SUBJECT TO GST

CHASSIS PARTS

R MODEL DIFF400 Single axle diff hub to hub ex R model - ratio 4.25 with

springs.

$ 2,000.00

AXLE HUB - MODERN CONVERSION2947 Axle wheel hubs for conversion to 10 stud USA from

Spider. Suit 44000lbs diff. Made in USA. NEW. Price

Per Each. Mack Part No MK3398HR735K

$ 635.00

2948 Brake drum for 2947. NEW. Price Per Each. $ 120.00

BUMPER BAR3055 R Model standard bumper bar - black. New. Made in

USA

POA

3056 R Model standard bumper bar - chrome. New. Weight

25kg. Length 2450mm, height 450mm. Flanges are

90mm.

$ 1,950.00

BUMPS STOP SPRING2819 Front spring buffer, suit R, flat top 2 1/4 high, 2 1/8

diam, 3/4 long X 3/8 locating bolt...See Rubber Parts

General Section for pricing and options

BATTERY BOX.3064 Heavy duty Mack battery box base with ribbed top - 2

sections. New.

380.00$

3065 Heavy duty Mack type battery box, bottom section holds

2 batteries with rubber latch/catch- as on R model -

new.

$ 263.90

Page 1 R MODEL-1 AXLE

5/13/2016


CHASSIS PARTS


BATTERY BOX. (cont)3066 Black steel ribbed top battery box lid cover - correct for

R model - NEW

$ 145.60

3067 Steel battery hold down bracket, hold the batteries

securely - not stocked.

$ 81.90

3068 Nickel Cadium carriage bolt. Holds batteries bracket

down - 2 required (sold as a kit)- not stocked

$ 10.00

ELEPHANT SPRING INSULATOR FEET2754 Top insulator, suit 44000. 4 Required. Price Per Each.

SEE RUBBER PARTS IN GENERAL SECTION FOR

PRICING.

2758 Top insulator suit 34-38000 steel base, 6ins x 4 1/2 ins

1 3/4 dowl. 4 Required. Price Per Each. SEE RUBBER

PARTS IN GENERAL SECTION FOR PRICING

2757 Lower insulator. Suit 34-38 & 44000 rear end. Steel

Base 6 1/8 x 6 1/8 1 3/4 dowl. 4 Required. Price Per

Each.SEE RUBBER PARTS IN GENERAL SECTION

FOR PRICING.

2755 Side spacer of lower insulator Neoprene. 8 Required.

Price Per Each. SEE RUBBER PARTS IN GENERAL

SECTION FOR PRICING.

MUD FLAPS3086 Mack facing dog. SEE RUBBER PARTS IN GENERAL

SECTION FOR PRICING AND OPTIONS.

FUEL TANK STRAP3085 Rubber Fuel Tank Strap - 2 inch. Comes in bag of 12ft.

(3.65M) SEE RUBBER PARTS IN GENERAL

SECTION FOR PRICING.


5/13/2016



STEERING PARTS

BEARING3095 R Bearing Steering Shaft. Size shaft 1 inch OD 2 inch. $ 75.00

3096 R Bearing Steering Shaft Firewall. Size shaft 1 inch

hole, centres 3 1/2 inch.

$ 82.00

DUST COVER3097 R Rubber dust boot steering shaft 1 inch (25mm) round

hole. See Rubber Parts in General Section for pricing

and options.

$ 14.50

3098 R Rubber dust boot slip yoke 4 slots to suit shaft. $ 28.00

SHAFT3091 Shaft steering lower - suit Superliner 2 and other

models

$ 250.00

3092 Shaft steering main - suit Superliner 2 over all length 46

inches (1070mm) as in photo thats with 6 inch (150mm)

inside yoke

$ 510.00

R STEERING

YOKE3088 Yoke. Steering Shaft Ross Box. (.875 inch ID) $ 65.00


5/13/2016



ENGINE3169 Air starter motor used. Note: Pinion lengths vary. 400.00$

3179 Air starter valve remote valve assembly. NEW $ 318.50

3180 12V air starter solonoid control valve - to suit 3179.

NEW

$ 206.00

ENGINE PARTS - 6 CYLINDER

WATER PUMP KIT

3106 Suit most 60's & 70's Macks 5/8 shaft. (Note: shaft

lengths do vary with number of pulleys and front

bearing sizes may vary also)

130.00$

WATER PUMP PARTS E9 V83232 Water Pump Kit - 9 Pieces. NOTE: This kit bushes

need reaming after fitting.

550.00$

3231 Water pump, complete new unit 1,300.00$

3230 Water pump seal only, suit above kit suit 3/4 shaft 1 5/8

OD

60.00$

LUBERFINER1008 Engine oil filter Luberfiner. Length15 inches (380mm)

diameter 7 1/2 inches (190mm). Suit 675 and other

similar build engines

120.00$

E9 EXHAUST3233 Gasket Exhaust E9. 3.5/8 bolt. Centres 21/2 x 2 1/2

hole..PER EACH

37.00$


5/13/2016



ENGINE

E 9 PARTS (CONT)3234 Oil Ring Turbo Oil Drain 3.00$

3235 Gasket Ring Exhaust - PER EACH 50.00$

3236 Oil Drain Gasket 1 inch hole. 2 1/16 bolt holes 8.45$

3237 Turbo gasket. 33.00$

3238 Oil Drain Gasket. 1/2 inch hole. 1 1/2 inch bolt holes. 5.00$

DRAG LINK COVERS303 Drag link leather grease covers with lace - new. See

Rubber Parts in General Section 6G for pricing.

$ 16.00

POWER STEERING316 Original power assist booster type steering kit - Used

(note: pump not included) as taken off used trucks. See

engine parts in next section for pump options.

$ 2,750.00

POWER STEERING PUMP124 Generator with regulator and power steering drive type

and oil pump as fitted to B & early R Models with power

assist optional steering from new

$ 445.00

DRIVE COUPLING137 Rubber Drive coupling for power steering pump of

Generator (as above)..Bin 131

$ 100.00

POWER STEERING PUMP V8365 Power Steering pump with drive - suit 864 V8 - Used $ 500.00


5/13/2016



ENGINE

E 9 PARTS (CONT)

BELT DRIVE386 Power Steering pump -Belt drive $ 250.00

388 Power Steering Pump Bracket $ 100.00

AIR INTAKE FITTINGS2742 Air hose connector, straight, suit 150 tube. SEE

GENERAL RUBBER SECTION 6G FOR COST &

OPTIONS

45.00$

2743 Air elbow 38deg. Suit 150 tube. SEE GENERAL

RUBBER SECTION 6G FOR COST & OPTIONS

45.00$

2744 Air elbow 90 deg suit 150 tube. SEE GENERAL

RUBBER SECTION 6G FOR COST & OPTIONS

45.00$

ENGINE PLATES1232 Mack engine exhaust emission control information

rocker cover plate. 200mm long x 70mm high.

42.00$

MACK GENERAL MODELS1628 Workshop Manual - 937 Pages - Early - Covers Models

B67-673-70. Includes Mack C.M.B.F.R.U & Flintstone -

For Engines END 465 - END 673 - ENDT 673 -

ENDT673 & B - END 711 - END 864 - ENDT 864. Fuel

pump, clutch, gear box, drive shaft, diffs, came with our

first new R Model Mack in 1976

$ 138.00

MACK R WORKSHOP MANUAL1629 Workshop Manual - covers R-RD-U & DM models - 338

Pages. Chassis, cooling, front axle, steering, springs, &

suspension, wheels, brakes, electrical. Cabs. This book

came with our first new R model Mack in 1976

$ 91.00


5/13/2016

R MODEL - SECTION 2

BONNETT, JEWELLERY, LATCHES, DOGS etc


BONNET LATCH SHORT TYPE - STEEL BONNET

3290 R Model black hood latch with square body - New - 4 required

per truck - Note: bottom pin needs turning for some models - sold

per each - catch is extra. Square tube section 3 1/2 inch x 90mm

long

$ 81.90

3291 R Model black hood catch for above– NEW – Price Per Each. $ 25.00

OPTIONAL CHROME- SHORT TYPE3292 Model R chrome hood latch with square body - new. Sold per

each. Note: Catch is extra. Square tube section 3 1/2 inch x

90mm long

$ 200.00

3293 Model R chrome hood latch for above - new. Suit 3292. Bin 3297 $ 40.00

MODEL R HOOD LATCH3294 Model R hood latch socket - NEW not painted. Bin 3293 $ 24.50

USED BLACK SHORT TYPE3295 Used R Model black short square - some rust. Used. $ 40.00

BONNET LATCH - LONG TYPE - FIBREGLASS

BONNET 3297 Latch - R Model black fibreglass hood (bonnet) 8inch (200mm)

pin centres. 2 Per Truck. Sold per Each. Square tube section 5

1/2 inch x 140mm long.

$ 70.00

BONNET LATCH SPRING - SHORT TYPE161 Replacement spring bonnet latch. 80mm long x 13mm wide -

Bin 141

$ 22.75

BONNET LATCH RUBBER3302 Long bonnet latch. Suit Superliner 2 and others. Length centre of

mounting pin to latch connecting point - 7 inch x 180mm overall

length 330mm x 13 inch.

$ 89.00

3301 Short bonnet latch. Also suit battery box and some bonnets. PER

EACH. Length centre of mounting pin to latch connecting point 4

3/4 inch x 125mm

$ 23.50

Page 7 R MODEL-2 BONNET ETC

5/13/2016

R MODEL - SECTION 2



BONNET WEAR STRAP3300 Nylon cabin to hood wear strap. R Model. PER EACH $ 31.00

BONNET HINGE3268 Bonnet hinge ball type $ 78.00

3269 Bonnet hinge pivot ball type. Suits R Model bonnet mount (with

front radiator mtg intercooler).

$ 120.00

BONNET FLARES3273 R Model bonnet mudguard flares $ 600.00

BONNET BADGES

GRILLE FRONT LETTER SET3310 Mack letter set. Front. Suit R Bonnet (hood). NEW. Letter size- 5

1/2inch by 3 1/4 inch

$ 98.00

SIDE SCRIPT3311 Mack script name - side 9inch x 3 inch. NEW. Sold Per Each. $ 48.00

BONNET BADGES3318 Econodyne Emblem - suit R Model - not stocked POA

3319 Maxidyne Emblem - suit R Model - not stocked POA

3321 Super liner emblem. Price per Each. NEW. $ 140.00

HALF DOG3322 Mack R - Half Dog - 2 per truck. L&R hand...NEW. Price Per

Each

$ 63.70


5/13/2016

R MODEL - SECTION 2



BONNET BADGES

LATE MACK DOG3307 Late Mack Short Eared Dog. Standard bonnet size...NEW $ 155.00

DOG BASE3308 R Model base for Bulldog - chromed.NEW $ 60.00

REPRODUCTION MODEL BADGES3324 Mack R600 badge.Cast from Brass, Detailed & Chromed - length

210mm (8 1/4 inch)

$ 165.00

3325 Mack R700 Badge, Cast from Brass, Detailed & Chromed. Length

210mm (8 1/4 inch)

$ 165.00

3326 Mack F700 Badge. Cast from Brass, Detailed & Chromed. Length

210mm (8 1/4 inch)

$ 165.00

3327 Mack R800 badge. Cast from brass. Detailed & Chromed. Length

210mm (8 1/4 inch)

$ 175.00

3330 V8 Side Badge. Cast from Brass. Detailed & Chromed.

90mmx60x8 thick.

$ 165.00

GRILLE 3303 Grille - Suit R & F - Used and Reconditioned. Price subject to

quality & stock. Priced on condition.

$ 1,000.00

FIBREGLASS GRILLE MOUNTING3304 New fibreglass mounting surround POA

GRILLE MOULDING3306 Grille surround moulding - black, in 2 sections.

3313 New Headlamp Assembly 12V. Fits most Macks with single

round headlight also other model trucks & cars. Supplied with

lens body and lead ready for fitting.

$ 85.00


5/13/2016

R MODEL - SECTION 2


ALL PRICES ARE SUBJECT TO GST3314 Headlamp Gasket for 3313 light assembly. $ 11.00

3317 Chrome head light bezel. Suits steel style fronts, R also DM,

Valueliner and Flintstone & B80 & 81 Tylden JR ute. Size rear ID

210mm front ID. 185mmx30mm deep. Sold Per each.

$ 103.00

BONNET BADGES3316 Headlight Trim. New Stainless steel 16 5/8 long x 9 1/4 high. 7

3/8 inch hole. Price Per Each. NOTE: This type has only 2 bolt

holes and is a wee bit smaller than the 6 hole one.

$ 99.00

HEADLIGHT BEZEL3332 Duel headlight bezel. Suit Superliner. 1 3/4 (45mm) deep with

mounting screws. PRICE PER EACH

$ 97.00

3333 Dual headlight bezel. Suit Superliner. 1 3/8 (35mm) with mounting

screws PRICE PER EACH

$ 130.00

HEADLIGHT ASSEMBLY3338 Complete oblong head light assembly RH (see part no 3332 for

chrome bezel)

$ 229.00

3339 Complete oblong head light assembly LH. (see part no 3332 for

chrome bezel)

$ 229.00

BLINKER (INDICATOR) LIGHTS3335 R Model side hood blinker lamp assembly. - Amber with wiring.

See Electrical in General Section 6E for pricing.

3334 R Model double side square LED hood top mounting blinker lamp

includes wiring tail. . (see Electrical in General Section 6E for

pricing). NOTE: This light has side lamp so 3335 above would not

be necessary.

PARK LIGHTS3336 Lamp Marker Park Light Assembly, clear with wiring. See

General Section 6E for Pricing.

3337 Parking light lens only - clear or amber for above. 3335 & 3336.


5/13/2016

R MODEL - SECTION 2



FRONT MUDFLAP3340 .Mudflap bonnet LH & RH R Model black with brass eyelets, not

Valveliner. See Rubber Parts in General Section for pricing and

options.

BONNET (HOOD) WEBBING2692 Suit Flintstone etc. - See Rubber in General Section 6G for

Pricing and Options.


5/13/2016

R MODEL - SECTION 3 - CABIN INTERIOR


WESTERN TRIM3345 Tylden offer a full R Model Western Trim package as per factory

with large facing dogs or diamonds hot welded into material or

optional stitched with buttons. Available in brown, cream, grey,

magnum (red), or colour of your choice.

2,500.00$

Western Trim including 2 seats (part No 3347), 2 Door trims (Part

No 3348), Rear Cab (Part No 3349) and Hood Lining (Part No

3350).

NOTE: ALL PRICES SHOWN ARE FOR UPHOLSTERY ONLY.

3347 Bucket Seats, original perforated vinyl with Mack Logo stamp (as

original) Price Per Each. Ask us to email better photos.

400.00$

3348 R Model Western door trim with welded dog logo. Original welded

patterns or stitched with buttons. Price Per Each. Ask us to email

better photos.

400.00$

3356 R Model door arm rest, included with 3348 OR Price Per Each.

Ask us to email better photos.

25.00$

3349 R Model rear Western original pattern cab lining in perforated

vinyl.

Ask us to email better quality photos.

475.00$

3350 R Model roof head lining in perforated vinyl.

Ask us to email better quality photos

475.00$

FOLLOWING NOT INCLUDED IN PART NO. 3345 PACKAGE

ABOVE PRICES

ROOF CONSOLE3351 R Model front roof console 160.00$

FLOOR CONSOLE3352 R Model centre floor console in vinyl and carpet - trim only.

NOTE: Photos shows a special one.

170.00$

ALL NEW FLOOR CONSOLE3357 Complete new centre console, 390mm long x 300mm deep x

280mm wide, folded from S/S with hinged marine ply. Lid covered

in vinyl with carpet kick strip on bottom with stamped dog logo in

lid.

POA

NEW PRODUCT

3356 Stainless steel centre console base, 390mm x300mm deep x 280

wide.

148.00$

Page 12 R MODEL-3 CABIN INTERIOR

5/13/2016



HATCH SURROUND3353 R Model hatch surround 55.00$

DOOR PILLAR3354 R Model Side front pillar trims - L & R 110.00$

DOG STAMP3365 Stamp your material with original dog type stamp PRICE PER

EACH.

45.00$

DASH3412 Dash - new. Made from fibreglass 900.00$

3516 Dash Panel Screw. See door for nut option..Bin 3540 3.00$

3519 Nut dash and door trim. Bin 3540. 3.00$

ENGINE STOP CABLE3359 R Model engine stop cable. 80.00$

HAND TROTTLE CABLE3360 R Model throttle cable. 80.00$

STANDARD MATCHING GAUGES SUIT R & B MACK

SPEEDO3367 Speedo gauge. 0-120 kmh cable 3 1/4 diam. 200.00$

3368 R Model speedo cable with 2 types of adaptors -112 Length

3050mm

70.00$


5/13/2016



TACHO3369 Tacho gauge. Zero to 3200 RPM with built in hour meter. 3 1/4

inch.

210.00$

3370 R Model Tacho cable with 3 types of adaptors. 2250mm long. 70.00$

MECHANICAL OIL PRESSURE GAUGE3372 Oil pressure gauge. 0 - 50 PSI mechanical. Suit 2 inch hole

mounting.

128.00$

LOW OIL PRESSURE SWITCH3373 Low oil pressure warning engine switch 51.00$

OIL TEMPERATURE GAUGE3378 Gauge - Oil Temp. Transmission & Diff. Bin 3373. 105.00$

3379 Gauge - Oil Temperature Sender for 3378. Transmission & Diff. 60.00$

VOLT METER3377 Gauge Volt 12V 10 to 16amps battery condition and charge

section

110.00$

WATER TEMPERATURE GAUGE3380 Gauge - Water Temp Neg 100-230 Fahrenheit 105.00$

3381 Gauge - Water Temperture Sender Unit. Negative Ground. Bin

3373

55.00$

AIR PRESSURE GAUGE3386 Gauge - Air Pressure PSI Dual needle. 156.00$


5/13/2016



FUEL GAUGE3387 Fuel Gauge 105.00$

3388 Sender Fuel Gauge R & F multi volt. Suit tank 6-24 inch deep.

Suit Pal & Mack gauges. 250ohm empty 1020ohm half full &

31ohm full.

81.00$

TACKO WITH MACK LOGO1030 Tachometer head - black face with Mack logo. 0 to 3200 RPM

with engine hours. Cable operated. Suit 85mm diam hole.

$ 178.00

INDICATOR STALK - TURN SIGNAL771 R Series indicator stalk - 7 wires 99.00$

3383-8 R Series indicator stalk. - 8 Wires 104.00$

DIP SWITCH3389 R Series dip switch with long leg. Bin 3377 55.00$

LOCK SET IGNITION & DOOR856 Lock Kit Ignition and door lock R 7 F Bin 88 76.45$

CUSTOM HORN BUTTON LOGO1258 Custom horn button logo with your Custom details. Mounted on

S/S plate for easy mounting on your horn button. See Stickers in

General Section for Pricing.

38.00$

FRONT FLOOR MAT3391 R Model front floor mat - moulded rubber ribbed with Mack logo &

wear section on LH side.

429.00$


5/13/2016



REAR FLOOR MAT3392 R Model rear floor under seat mat - moulded ribbed rubber 200.00$

3393 R Model plain floor mat (no ribs etc) supplied in one section.

LOOSE FLOOR MAT2771 Floor mat - loose with dog logo with cut out for peddles. Sold as

Pair. The second (passenger side) one is square.

135.00$

R MODEL CLUTCH PEDAL3406 R Model clutch pedal & bracket clutch type. Generally stocked to

change from old through floor pedal type to pendulum type with

cable. Photo shows insulation in B Model. - Used

230.00$

CLUTCH CABLE3404 Suit R600 & Valveliner 109" (2770mm) 112" (2850mm) tip to tip. 144.00$

3403 Suit Trident, Titan, VL S/L, 138" (3480mm) long 220.00$

GEAR SHIFT BOOT2869 Gear shift boot - rubber - 180mm long x 100mm wide x 70mm

high. See General Section 6G for pricing

2868 Stainless steel surround Cover for boot 2869. See General

Section Rubber for Pricing.

2870 Steering Column gear shift boot and rubber - 222mm long x

135mm wide x 70 high.See General Section 6G for pricing

CLUTCH RUBBER2482 Clutch pedal - rubber replacement pad, also fits B Model. See

General Section 6G for pricing.


5/13/2016



R MODEL FOOT VALVE PEDAL3074 New brake pedal with Mack logo. Note holes are not drilled. See

General Section for other brake options.

78.00$

THROTTLE PEDAL361 R Model fuel pedal only with Mack logo - New. Price Per Each. 72.80$

KICK PLATES3415 R Door entry aluminium kick plates POA

3414 R Model Entry Kick Plate. Custom Polished Stainless Steel. POA

HEATER DUCT3407 Round heater duct vents - suit R Model POA

3408 Oblong heater duct vents - suit R Model POA

MACK AIR ACTUATORY3405 Mack red dot part no 4379-RD554144 suit Mack CHR 1992 to

about 2000. Used to open and close air vent shutters.

60.00$

DRIVER INSTRUCTION STICKERSSEE GENERAL SECTION - 6J FOR OPTIONS


5/13/2016

SECTION 4 - R MODEL CABIN EXTERIOR


WINDSCREEN GLASS3416 Windscreen glass LHR, suit R. valve, super, metro. $ 160.00

3417 Windscreen glass RHR, suit R, valve, super, metro. $ 160.00

WINDSCREEN RUBBER3418 Windscreen rubber - complete both sides. $ 160.00

ROOF VENT SEAL3420 Roof Vent Seal $ 38.00

WIPER BLADE3497 Windscreen wiper blade. R Model. 16 inch. $ 39.00

3495 LH wiper arm with inbuilt concealed windshield washer nozzles & two

knurled drive options.

$ 107.00

3496 RH Wiper arm with inbuilt concealed windshield washer nozzle and

two knurled drive options.

$ 107.00

WINDSCREEN BOTTLE3499 Reservoir windscreen washer bottle & pump. R model door. $ 104.70

REAR WINDOW3430 R Model rear window - laminated. Tinted Std. Auto glass. $ 150.00

3432 Rear window rubber seal. $ 98.00

CABIN INSULATOR3434 Cab insulator R cabin. Also R fuel tanks. 3 3/4 in long x 2 5/8 diam x

1 1/2 hole.

$ 28.00

Page 18 R MODEL-4 CABIN EXTERIOR

5/13/2016

SECTION 4 - R MODEL CABIN EXTERIOR


GRAB ENTRY HANDLE3437 Grab entry handles. 23 long. Price Per Each. $ 78.00

AIR HORN3439 Horn - Air - round trumpet kit. $ 141.00

AIR CLEANER HAT3461 Air cleaner hat - black plastic 15in x 3 1/2 plus sprigit extra 1 1/2 ins

rain.

$ 140.00

CAB LEVELLING VALVE3467 Valve cab levelling suit R Model + T401 Kw. $ 148.00

CABIN SUPER CUSHION AIR BAG3468 Cabin rear air spring bag. Max inflation 100 PSI. Max Torque 15ft lbs.

Length 5 1/4 inch. Diameter at big end - 3 1/2 inch

$ 86.42

FIREWALL PLATE1235 Firewall certification plate (See General Section 6I for pricing).

CABIN BULLET LIGHTS3444 Bullet type roof lights 390mm long x 90mm diam, supplied with

mounting bolts. See General Electrical Section 6E for pricing and

options.

3445 Bullet short centre light. 200mm long x 90mm diam. Price Per Each.

See General Electrical Section 6E for pricing and options.

FRONT VENT OPENER901 Optional front vent opener. Can be adapted to suit without a lot of

modification. 155mm closed 205mm open. Max load 125kg. Travel

speed 6mm per second. Has inbuilt limit switches supplied with 12V

switch.

$ 125.00

Page 19 R MODEL-4 CABIN EXTERIOR

5/13/2016

SECTION 5 - R MODEL - DOORS

ALL PRICES ARE SUBJECT TO GST3500 Door shell - R Model - new Left - suits 79 onwards door locks. $ 990.00

3501 Door shell - R Model. New right. Sit 79 onwards door locks. $ 990.00

3503 Door - R Model - Used. Ask re condition & price. Shell or

complete.

DOOR INNER PANEL3506 Door inner panel RH late bare - NEW $ 210.00

3516 Door panel screws. Price Per Each. $ 3.00

3519 Door Panel 1/4 in thread. $ 3.00

DOOR HANDLE3523 R door handle. Outer R & F model cb. $ 79.50

3524 R door handle inner R & F pre 79 NOTE: Part no. 3522 below has

better clearance.

$ 79.50

3522 R Model door handle - inner R & F after 1979 with thicker trim.

NOTE: Later type, fits pre 79 door if you need better clearance.

$ 70.00

3521 R Model door pull handle. Suit R, RB, RD, DM, MC, MR & LE.

Page 20 R MODEL-5 DOORS

5/13/2016



DOOR HANDLE ESCUTCHEON3526 Handle escutcheon. Suit door and window crank handle. $ 8.50

3527 Pin Handle window & door. Suit door and window crank handle.

Bin 3526.

$ 2.15

QUARTER VENT WINDOW3528 Vent window flipper LH. (Quarter Vent), Suit models R & F. $ 248.00

3529 Vent window flipper RH. (Quarter Vent). Suit models R & F $ 248.00

R MODEL DOOR GLASS3530 Door glass R & L. Note: We supply 6mm green tinted toughened

auto glass.

$ 102.00

R MODEL EARLY WINDOW REGULATOR89 Window regulator scissors - Left. Suit early R style cabs. $ 159.00

90 Window regulator scissors - Right. Suit early R style cabs. $ 159.00

R MODEL EARLY REGULATOR GEAR PLATE91 Gear plate for passenger side door regulator. Suit early style cabs. $ 149.00

92 Gear plate for driver side door regulator. Suit early styled cabs. $ 149.00

PLEASE NOTE: DOOR PART CHANGES IN 1979

AND 1983,


5/13/2016



EARLY SIDE GLASS SUPPORT CHANNEL3535 Support channel for door glass regulator for passenger side roll

up window glass 400mm long. Used with Part 89 & 90.

$ 53.50

3536 Support channel for door glass regulator for driver side roll up

window glass 400mm long

$ 53.50

LATE MODEL WINDOW REGULATOR

3538 Regulator assembly LH. (Later model - post 83) $ 138.00

3539 Regulator assembly RH. (Later model - post 83). $ 138.00

3540 Retaining ring for regulator to glass support track. Price Per Each.

(Suit 3538 & 3539)

$ 3.60

3545 Linkage remote door. Connects handle to door lock. Used with

part No 3538 & 3539

$ 68.00

LATE MODEL WINDOW SUPPORT3535 Support window RH model. Used with Part 3538 - 450mm long. $ 89.00

3536 Support window LH model. Used with Part 3539. 450mm long. $ 89.00

WINDOW REGULATOR HANDLE3525 Window regulator handle, early R&F. See part no 3526 & 3527

for escutcheon & pin..page 2. Note Part No 3531 below has more

clearance.

$ 50.00

3531 Window regulator handle. Suit doors with Western Trim or worn

Shafts.

$ 72.00


5/13/2016



DOOR LATCH EARLY TO 19793553 Latch door early RH, suit R & F, MIR, MBR $ 265.00

3554 Latch door - early LH. Suit R & F, MIR, MBR. $ 265.00

DOOR LATCH AFTER 1979 R & F3542 Latch door late RH. Used with part no. 3545. Mack current style

DM, R, RB, RD.

$ 84.00

3543 Latch door- late LH. Used with part no. 3545. Mack current style

DM, R, RB, RD.

$ 84.00

DOOR LATCH SCREWS3517 Door latch holding screws. 3 Per Door - 1/4 inch. PRICE PER

EACH..... B 3516

$ 1.82

DOOR STRIKER - EARLY R & F3555 Striker Plate - RH. Mack early style R, RB, RD, DM. $ 148.00

3556 Striker Plate - LH. Mack early style R, RB, RD, DM. $ 148.00

3559 Striker Plate RH - used with part no. 3560. Mack current style R,

RB, RD, DM.

$ 44.00

Striker Plate LH. used with part no. 3560. Mack current style R,

RB, RD, DM.

$ 48.00


5/13/2016

SECTION 5 -R MODEL - DOORS


KEY DOOR LOCKS856 Door & ignition lock set, includes 2 door tumblers and one ignition

tumbler with 2 matching keys. New. SEE GENERAL SECTION 6E

FOR PRICING Bin 88

DOOR LOCK RETAINER CLIP88 Door lock slide in retainer clip. Slides from outside inner door to

hold door lock in place. - New

$ 11.50

BAILEY CHANNEL3549 Channel Bailey R&F. 2 per door. Price Per Each. Supplied with 5

clips. See Rubber Parts in General Section for Pricing.

WINDOW WEATHER STRIP3550 Weather strip R & F model door glass sqeegee guides.- 2

required per door L & R. Price Per Each.see Rubber Parts in

General Section for Pricing.

SPECIAL DOOR SEAL3558 Rubber super soft hollow door seal. Adhesive backing. Fits in

cabin door, closes against it.. 13mm wide 18mm high, sold in a

4.5m (15ft) length. See Rubber Parts in General Section for

Pricing.

MIRROR ARMS3575 Kit mirror bracket RH stainless. $ 204.00

3576 Kit mirror bracket LH stainless. $ 204.00

MIRROR HEAD3577 Mirror head-Mack. LH alloy type with bulldog but no heating or

light. See 803 General Electrical Section for light in photo

$ 125.00

3578 Mirror head-Mack. LH alloy type with bulldog but no heating or

light.

$ 125.00


r model mack mail order parts catalogue model mack mail order parts catalogue ... suit 675 and other...

Documents